Next step: compile jni sources correctly.

4 files changed, 0 insertions, 1734 deletions

diff --git a/openssl/crypto/rc4/asm/rc4-586.pl b/openssl/crypto/rc4/asm/rc4-586.pl
deleted file mode 100644
index 38a44a70..00000000
--- a/openssl/crypto/rc4/asm/rc4-586.pl
+++ /dev/null
@@ -1,270 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# At some point it became apparent that the original SSLeay RC4
-# assembler implementation performs suboptimally on latest IA-32
-# microarchitectures. After re-tuning performance has changed as
-# following:
-#
-# Pentium	-10%
-# Pentium III	+12%
-# AMD		+50%(*)
-# P4		+250%(**)
-#
-# (*)	This number is actually a trade-off:-) It's possible to
-#	achieve	+72%, but at the cost of -48% off PIII performance.
-#	In other words code performing further 13% faster on AMD
-#	would perform almost 2 times slower on Intel PIII...
-#	For reference! This code delivers ~80% of rc4-amd64.pl
-#	performance on the same Opteron machine.
-# (**)	This number requires compressed key schedule set up by
-#	RC4_set_key [see commentary below for further details].
-#
-#					<appro@fy.chalmers.se>
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"rc4-586.pl");
-
-$xx="eax";
-$yy="ebx";
-$tx="ecx";
-$ty="edx";
-$inp="esi";
-$out="ebp";
-$dat="edi";
-
-sub RC4_loop {
-  my $i=shift;
-  my $func = ($i==0)?*mov:*or;
-
-	&add	(&LB($yy),&LB($tx));
-	&mov	($ty,&DWP(0,$dat,$yy,4));
-	&mov	(&DWP(0,$dat,$yy,4),$tx);
-	&mov	(&DWP(0,$dat,$xx,4),$ty);
-	&add	($ty,$tx);
-	&inc	(&LB($xx));
-	&and	($ty,0xff);
-	&ror	($out,8)	if ($i!=0);
-	if ($i<3) {
-	  &mov	($tx,&DWP(0,$dat,$xx,4));
-	} else {
-	  &mov	($tx,&wparam(3));	# reload [re-biased] out
-	}
-	&$func	($out,&DWP(0,$dat,$ty,4));
-}
-
-# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
-&function_begin("RC4");
-	&mov	($dat,&wparam(0));	# load key schedule pointer
-	&mov	($ty, &wparam(1));	# load len
-	&mov	($inp,&wparam(2));	# load inp
-	&mov	($out,&wparam(3));	# load out
-
-	&xor	($xx,$xx);		# avoid partial register stalls
-	&xor	($yy,$yy);
-
-	&cmp	($ty,0);		# safety net
-	&je	(&label("abort"));
-
-	&mov	(&LB($xx),&BP(0,$dat));	# load key->x
-	&mov	(&LB($yy),&BP(4,$dat));	# load key->y
-	&add	($dat,8);
-
-	&lea	($tx,&DWP(0,$inp,$ty));
-	&sub	($out,$inp);		# re-bias out
-	&mov	(&wparam(1),$tx);	# save input+len
-
-	&inc	(&LB($xx));
-
-	# detect compressed key schedule...
-	&cmp	(&DWP(256,$dat),-1);
-	&je	(&label("RC4_CHAR"));
-
-	&mov	($tx,&DWP(0,$dat,$xx,4));
-
-	&and	($ty,-4);		# how many 4-byte chunks?
-	&jz	(&label("loop1"));
-
-	&lea	($ty,&DWP(-4,$inp,$ty));
-	&mov	(&wparam(2),$ty);	# save input+(len/4)*4-4
-	&mov	(&wparam(3),$out);	# $out as accumulator in this loop
-
-	&set_label("loop4",16);
-		for ($i=0;$i<4;$i++) { RC4_loop($i); }
-		&ror	($out,8);
-		&xor	($out,&DWP(0,$inp));
-		&cmp	($inp,&wparam(2));	# compare to input+(len/4)*4-4
-		&mov	(&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here
-		&lea	($inp,&DWP(4,$inp));
-		&mov	($tx,&DWP(0,$dat,$xx,4));
-	&jb	(&label("loop4"));
-
-	&cmp	($inp,&wparam(1));	# compare to input+len
-	&je	(&label("done"));
-	&mov	($out,&wparam(3));	# restore $out
-
-	&set_label("loop1",16);
-		&add	(&LB($yy),&LB($tx));
-		&mov	($ty,&DWP(0,$dat,$yy,4));
-		&mov	(&DWP(0,$dat,$yy,4),$tx);
-		&mov	(&DWP(0,$dat,$xx,4),$ty);
-		&add	($ty,$tx);
-		&inc	(&LB($xx));
-		&and	($ty,0xff);
-		&mov	($ty,&DWP(0,$dat,$ty,4));
-		&xor	(&LB($ty),&BP(0,$inp));
-		&lea	($inp,&DWP(1,$inp));
-		&mov	($tx,&DWP(0,$dat,$xx,4));
-		&cmp	($inp,&wparam(1));	# compare to input+len
-		&mov	(&BP(-1,$out,$inp),&LB($ty));
-	&jb	(&label("loop1"));
-
-	&jmp	(&label("done"));
-
-# this is essentially Intel P4 specific codepath...
-&set_label("RC4_CHAR",16);
-	&movz	($tx,&BP(0,$dat,$xx));
-	# strangely enough unrolled loop performs over 20% slower...
-	&set_label("cloop1");
-		&add	(&LB($yy),&LB($tx));
-		&movz	($ty,&BP(0,$dat,$yy));
-		&mov	(&BP(0,$dat,$yy),&LB($tx));
-		&mov	(&BP(0,$dat,$xx),&LB($ty));
-		&add	(&LB($ty),&LB($tx));
-		&movz	($ty,&BP(0,$dat,$ty));
-		&add	(&LB($xx),1);
-		&xor	(&LB($ty),&BP(0,$inp));
-		&lea	($inp,&DWP(1,$inp));
-		&movz	($tx,&BP(0,$dat,$xx));
-		&cmp	($inp,&wparam(1));
-		&mov	(&BP(-1,$out,$inp),&LB($ty));
-	&jb	(&label("cloop1"));
-
-&set_label("done");
-	&dec	(&LB($xx));
-	&mov	(&BP(-4,$dat),&LB($yy));	# save key->y
-	&mov	(&BP(-8,$dat),&LB($xx));	# save key->x
-&set_label("abort");
-&function_end("RC4");
-
-########################################################################
-
-$inp="esi";
-$out="edi";
-$idi="ebp";
-$ido="ecx";
-$idx="edx";
-
-&external_label("OPENSSL_ia32cap_P");
-
-# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
-&function_begin("RC4_set_key");
-	&mov	($out,&wparam(0));		# load key
-	&mov	($idi,&wparam(1));		# load len
-	&mov	($inp,&wparam(2));		# load data
-	&picmeup($idx,"OPENSSL_ia32cap_P");
-
-	&lea	($out,&DWP(2*4,$out));		# &key->data
-	&lea	($inp,&DWP(0,$inp,$idi));	# $inp to point at the end
-	&neg	($idi);
-	&xor	("eax","eax");
-	&mov	(&DWP(-4,$out),$idi);		# borrow key->y
-
-	&bt	(&DWP(0,$idx),20);		# check for bit#20
-	&jc	(&label("c1stloop"));
-
-&set_label("w1stloop",16);
-	&mov	(&DWP(0,$out,"eax",4),"eax");	# key->data[i]=i;
-	&add	(&LB("eax"),1);			# i++;
-	&jnc	(&label("w1stloop"));
-
-	&xor	($ido,$ido);
-	&xor	($idx,$idx);
-
-&set_label("w2ndloop",16);
-	&mov	("eax",&DWP(0,$out,$ido,4));
-	&add	(&LB($idx),&BP(0,$inp,$idi));
-	&add	(&LB($idx),&LB("eax"));
-	&add	($idi,1);
-	&mov	("ebx",&DWP(0,$out,$idx,4));
-	&jnz	(&label("wnowrap"));
-	  &mov	($idi,&DWP(-4,$out));
-	&set_label("wnowrap");
-	&mov	(&DWP(0,$out,$idx,4),"eax");
-	&mov	(&DWP(0,$out,$ido,4),"ebx");
-	&add	(&LB($ido),1);
-	&jnc	(&label("w2ndloop"));
-&jmp	(&label("exit"));
-
-# Unlike all other x86 [and x86_64] implementations, Intel P4 core
-# [including EM64T] was found to perform poorly with above "32-bit" key
-# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded
-# assembler turned out to be 3.5x if re-coded for compressed 8-bit one,
-# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit
-# schedule for x86[_64], because non-P4 implementations suffer from
-# significant performance losses then, e.g. PIII exhibits >2x
-# deterioration, and so does Opteron. In order to assure optimal
-# all-round performance, we detect P4 at run-time and set up compressed
-# key schedule, which is recognized by RC4 procedure.
-
-&set_label("c1stloop",16);
-	&mov	(&BP(0,$out,"eax"),&LB("eax"));	# key->data[i]=i;
-	&add	(&LB("eax"),1);			# i++;
-	&jnc	(&label("c1stloop"));
-
-	&xor	($ido,$ido);
-	&xor	($idx,$idx);
-	&xor	("ebx","ebx");
-
-&set_label("c2ndloop",16);
-	&mov	(&LB("eax"),&BP(0,$out,$ido));
-	&add	(&LB($idx),&BP(0,$inp,$idi));
-	&add	(&LB($idx),&LB("eax"));
-	&add	($idi,1);
-	&mov	(&LB("ebx"),&BP(0,$out,$idx));
-	&jnz	(&label("cnowrap"));
-	  &mov	($idi,&DWP(-4,$out));
-	&set_label("cnowrap");
-	&mov	(&BP(0,$out,$idx),&LB("eax"));
-	&mov	(&BP(0,$out,$ido),&LB("ebx"));
-	&add	(&LB($ido),1);
-	&jnc	(&label("c2ndloop"));
-
-	&mov	(&DWP(256,$out),-1);		# mark schedule as compressed
-
-&set_label("exit");
-	&xor	("eax","eax");
-	&mov	(&DWP(-8,$out),"eax");		# key->x=0;
-	&mov	(&DWP(-4,$out),"eax");		# key->y=0;
-&function_end("RC4_set_key");
-
-# const char *RC4_options(void);
-&function_begin_B("RC4_options");
-	&call	(&label("pic_point"));
-&set_label("pic_point");
-	&blindpop("eax");
-	&lea	("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
-	&picmeup("edx","OPENSSL_ia32cap_P");
-	&bt	(&DWP(0,"edx"),20);
-	&jnc	(&label("skip"));
-	  &add	("eax",12);
-	&set_label("skip");
-	&ret	();
-&set_label("opts",64);
-&asciz	("rc4(4x,int)");
-&asciz	("rc4(1x,char)");
-&asciz	("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
-&align	(64);
-&function_end_B("RC4_options");
-
-&asm_finish();
-
diff --git a/openssl/crypto/rc4/asm/rc4-ia64.pl b/openssl/crypto/rc4/asm/rc4-ia64.pl
deleted file mode 100644
index 49cd5b5e..00000000
--- a/openssl/crypto/rc4/asm/rc4-ia64.pl
+++ /dev/null
@@ -1,755 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by David Mosberger <David.Mosberger@acm.org> based on the
-# Itanium optimized Crypto code which was released by HP Labs at
-# http://www.hpl.hp.com/research/linux/crypto/.
-#
-# Copyright (c) 2005 Hewlett-Packard Development Company, L.P.
-#
-# Permission is hereby granted, free of charge, to any person obtaining
-# a copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sublicense, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-#
-# The above copyright notice and this permission notice shall be
-# included in all copies or substantial portions of the Software.
-
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
-
-
-
-# This is a little helper program which generates a software-pipelined
-# for RC4 encryption.  The basic algorithm looks like this:
-#
-#   for (counter = 0; counter < len; ++counter)
-#     {
-#       in = inp[counter];
-#       SI = S[I];
-#       J = (SI + J) & 0xff;
-#       SJ = S[J];
-#       T = (SI + SJ) & 0xff;
-#       S[I] = SJ, S[J] = SI;
-#       ST = S[T];
-#       outp[counter] = in ^ ST;
-#       I = (I + 1) & 0xff;
-#     }
-#
-# Pipelining this loop isn't easy, because the stores to the S[] array
-# need to be observed in the right order.  The loop generated by the
-# code below has the following pipeline diagram:
-#
-#      cycle
-#     | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 |16 |17 |
-# iter
-#   1: xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
-#   2:             xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
-#   3:                         xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
-#
-#   where:
-# 	LDI = load of S[I]
-# 	LDJ = load of S[J]
-# 	SWP = swap of S[I] and S[J]
-# 	LDT = load of S[T]
-#
-# Note that in the above diagram, the major trouble-spot is that LDI
-# of the 2nd iteration is performed BEFORE the SWP of the first
-# iteration.  Fortunately, this is easy to detect (I of the 1st
-# iteration will be equal to J of the 2nd iteration) and when this
-# happens, we simply forward the proper value from the 1st iteration
-# to the 2nd one.  The proper value in this case is simply the value
-# of S[I] from the first iteration (thanks to the fact that SWP
-# simply swaps the contents of S[I] and S[J]).
-#
-# Another potential trouble-spot is in cycle 7, where SWP of the 1st
-# iteration issues at the same time as the LDI of the 3rd iteration.
-# However, thanks to IA-64 execution semantics, this can be taken
-# care of simply by placing LDI later in the instruction-group than
-# SWP.  IA-64 CPUs will automatically forward the value if they
-# detect that the SWP and LDI are accessing the same memory-location.
-
-# The core-loop that can be pipelined then looks like this (annotated
-# with McKinley/Madison issue port & latency numbers, assuming L1
-# cache hits for the most part):
-
-# operation:	    instruction:		    issue-ports:  latency
-# ------------------  -----------------------------   ------------- -------
-
-# Data = *inp++       ld1 data = [inp], 1             M0-M1         1 cyc     c0
-#                     shladd Iptr = I, KeyTable, 3    M0-M3, I0, I1 1 cyc
-# I = (I + 1) & 0xff  padd1 nextI = I, one            M0-M3, I0, I1 3 cyc
-#                     ;;
-# SI = S[I]           ld8 SI = [Iptr]                 M0-M1         1 cyc     c1 * after SWAP!
-#                     ;;
-#                     cmp.eq.unc pBypass = I, J                                  * after J is valid!
-# J = SI + J          add J = J, SI                   M0-M3, I0, I1 1 cyc     c2
-#                     (pBypass) br.cond.spnt Bypass
-#                     ;;
-# ---------------------------------------------------------------------------------------
-# J = J & 0xff        zxt1 J = J                      I0, I1, 1 cyc           c3
-#                     ;;
-#                     shladd Jptr = J, KeyTable, 3    M0-M3, I0, I1 1 cyc     c4
-#                     ;;
-# SJ = S[J]           ld8 SJ = [Jptr]                 M0-M1         1 cyc     c5
-#                     ;;
-# ---------------------------------------------------------------------------------------
-# T = (SI + SJ)       add T = SI, SJ                  M0-M3, I0, I1 1 cyc     c6
-#                     ;;
-# T = T & 0xff        zxt1 T = T                      I0, I1        1 cyc
-# S[I] = SJ           st8 [Iptr] = SJ                 M2-M3                   c7
-# S[J] = SI           st8 [Jptr] = SI                 M2-M3
-#                     ;;
-#                     shladd Tptr = T, KeyTable, 3    M0-M3, I0, I1 1 cyc     c8
-#                     ;;
-# ---------------------------------------------------------------------------------------
-# T = S[T]            ld8 T = [Tptr]                  M0-M1         1 cyc     c9
-#                     ;;
-# data ^= T           xor data = data, T              M0-M3, I0, I1 1 cyc     c10
-#                     ;;
-# *out++ = Data ^ T   dep word = word, data, 8, POS   I0, I1        1 cyc     c11
-#                     ;;
-# ---------------------------------------------------------------------------------------
-
-# There are several points worth making here:
-
-#   - Note that due to the bypass/forwarding-path, the first two
-#     phases of the loop are strangly mingled together.  In
-#     particular, note that the first stage of the pipeline is
-#     using the value of "J", as calculated by the second stage.
-#   - Each bundle-pair will have exactly 6 instructions.
-#   - Pipelined, the loop can execute in 3 cycles/iteration and
-#     4 stages.  However, McKinley/Madison can issue "st1" to
-#     the same bank at a rate of at most one per 4 cycles.  Thus,
-#     instead of storing each byte, we accumulate them in a word
-#     and then write them back at once with a single "st8" (this
-#     implies that the setup code needs to ensure that the output
-#     buffer is properly aligned, if need be, by encoding the
-#     first few bytes separately).
-#   - There is no space for a "br.ctop" instruction.  For this
-#     reason we can't use module-loop support in IA-64 and have
-#     to do a traditional, purely software-pipelined loop.
-#   - We can't replace any of the remaining "add/zxt1" pairs with
-#     "padd1" because the latency for that instruction is too high
-#     and would push the loop to the point where more bypasses
-#     would be needed, which we don't have space for.
-#   - The above loop runs at around 3.26 cycles/byte, or roughly
-#     440 MByte/sec on a 1.5GHz Madison.  This is well below the
-#     system bus bandwidth and hence with judicious use of
-#     "lfetch" this loop can run at (almost) peak speed even when
-#     the input and output data reside in memory.  The
-#     max. latency that can be tolerated is (PREFETCH_DISTANCE *
-#     L2_LINE_SIZE * 3 cyc), or about 384 cycles assuming (at
-#     least) 1-ahead prefetching of 128 byte cache-lines.  Note
-#     that we do NOT prefetch into L1, since that would only
-#     interfere with the S[] table values stored there.  This is
-#     acceptable because there is a 10 cycle latency between
-#     load and first use of the input data.
-#   - We use a branch to out-of-line bypass-code of cycle-pressure:
-#     we calculate the next J, check for the need to activate the
-#     bypass path, and activate the bypass path ALL IN THE SAME
-#     CYCLE.  If we didn't have these constraints, we could do
-#     the bypass with a simple conditional move instruction.
-#     Fortunately, the bypass paths get activated relatively
-#     infrequently, so the extra branches don't cost all that much
-#     (about 0.04 cycles/byte, measured on a 16396 byte file with
-#     random input data).
-#
-
-$phases = 4;		# number of stages/phases in the pipelined-loop
-$unroll_count = 6;	# number of times we unrolled it
-$pComI = (1 << 0);
-$pComJ = (1 << 1);
-$pComT = (1 << 2);
-$pOut  = (1 << 3);
-
-$NData = 4;
-$NIP = 3;
-$NJP = 2;
-$NI = 2;
-$NSI = 3;
-$NSJ = 2;
-$NT = 2;
-$NOutWord = 2;
-
-#
-# $threshold is the minimum length before we attempt to use the
-# big software-pipelined loop.  It MUST be greater-or-equal
-# to:
-#  		PHASES * (UNROLL_COUNT + 1) + 7
-#
-# The "+ 7" comes from the fact we may have to encode up to
-#   7 bytes separately before the output pointer is aligned.
-#
-$threshold = (3 * ($phases * ($unroll_count + 1)) + 7);
-
-sub I {
-    local *code = shift;
-    local $format = shift;
-    $code .= sprintf ("\t\t".$format."\n", @_);
-}
-
-sub P {
-    local *code = shift;
-    local $format = shift;
-    $code .= sprintf ($format."\n", @_);
-}
-
-sub STOP {
-    local *code = shift;
-    $code .=<<___;
-		;;
-___
-}
-
-sub emit_body {
-    local *c = shift;
-    local *bypass = shift;
-    local ($iteration, $p) = @_;
-
-    local $i0 = $iteration;
-    local $i1 = $iteration - 1;
-    local $i2 = $iteration - 2;
-    local $i3 = $iteration - 3;
-    local $iw0 = ($iteration - 3) / 8;
-    local $iw1 = ($iteration > 3) ? ($iteration - 4) / 8 : 1;
-    local $byte_num = ($iteration - 3) % 8;
-    local $label = $iteration + 1;
-    local $pAny = ($p & 0xf) == 0xf;
-    local $pByp = (($p & $pComI) && ($iteration > 0));
-
-    $c.=<<___;
-//////////////////////////////////////////////////
-___
-
-    if (($p & 0xf) == 0) {
-	$c.="#ifdef HOST_IS_BIG_ENDIAN\n";
-	&I(\$c,"shr.u	OutWord[%u] = OutWord[%u], 32;;",
-				$iw1 % $NOutWord, $iw1 % $NOutWord);
-	$c.="#endif\n";
-	&I(\$c, "st4 [OutPtr] = OutWord[%u], 4", $iw1 % $NOutWord);
-	return;
-    }
-
-    # Cycle 0
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "ld1    Data[%u] = [InPtr], 1", $i0 % $NData)     if ($p & $pComI);
-    &I(\$c, "padd1  I[%u] = One, I[%u]", $i0 % $NI, $i1 % $NI)if ($p & $pComI);
-    &I(\$c, "zxt1   J = J")				      if ($p & $pComJ);
-    &I(\$c, "}")					      if ($pAny);
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "LKEY   T[%u] = [T[%u]]", $i1 % $NT, $i1 % $NT)   if ($p & $pOut);
-    &I(\$c, "add    T[%u] = SI[%u], SJ[%u]",
-       $i0 % $NT, $i2 % $NSI, $i1 % $NSJ)		      if ($p & $pComT);
-    &I(\$c, "KEYADDR(IPr[%u], I[%u])", $i0 % $NIP, $i1 % $NI) if ($p & $pComI);
-    &I(\$c, "}")					      if ($pAny);
-    &STOP(\$c);
-
-    # Cycle 1
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "SKEY   [IPr[%u]] = SJ[%u]", $i2 % $NIP, $i1%$NSJ)if ($p & $pComT);
-    &I(\$c, "SKEY   [JP[%u]] = SI[%u]", $i1 % $NJP, $i2%$NSI) if ($p & $pComT);
-    &I(\$c, "zxt1   T[%u] = T[%u]", $i0 % $NT, $i0 % $NT)     if ($p & $pComT);
-    &I(\$c, "}")					      if ($pAny);
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "LKEY   SI[%u] = [IPr[%u]]", $i0 % $NSI, $i0%$NIP)if ($p & $pComI);
-    &I(\$c, "KEYADDR(JP[%u], J)", $i0 % $NJP)		      if ($p & $pComJ);
-    &I(\$c, "xor    Data[%u] = Data[%u], T[%u]",
-       $i3 % $NData, $i3 % $NData, $i1 % $NT)		      if ($p & $pOut);
-    &I(\$c, "}")					      if ($pAny);
-    &STOP(\$c);
-
-    # Cycle 2
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "LKEY   SJ[%u] = [JP[%u]]", $i0 % $NSJ, $i0%$NJP) if ($p & $pComJ);
-    &I(\$c, "cmp.eq pBypass, p0 = I[%u], J", $i1 % $NI)	      if ($pByp);
-    &I(\$c, "dep OutWord[%u] = Data[%u], OutWord[%u], BYTE_POS(%u), 8",
-       $iw0%$NOutWord, $i3%$NData, $iw1%$NOutWord, $byte_num) if ($p & $pOut);
-    &I(\$c, "}")					      if ($pAny);
-    &I(\$c, "{ .mmb")					      if ($pAny);
-    &I(\$c, "add    J = J, SI[%u]", $i0 % $NSI)		      if ($p & $pComI);
-    &I(\$c, "KEYADDR(T[%u], T[%u])", $i0 % $NT, $i0 % $NT)    if ($p & $pComT);
-    &P(\$c, "(pBypass)\tbr.cond.spnt.many .rc4Bypass%u",$label)if ($pByp);
-    &I(\$c, "}") if ($pAny);
-    &STOP(\$c);
-
-    &P(\$c, ".rc4Resume%u:", $label)			      if ($pByp);
-    if ($byte_num == 0 && $iteration >= $phases) {
-	&I(\$c, "st8 [OutPtr] = OutWord[%u], 8",
-	   $iw1 % $NOutWord)				      if ($p & $pOut);
-	if ($iteration == (1 + $unroll_count) * $phases - 1) {
-	    if ($unroll_count == 6) {
-		&I(\$c, "mov OutWord[%u] = OutWord[%u]",
-		   $iw1 % $NOutWord, $iw0 % $NOutWord);
-	    }
-	    &I(\$c, "lfetch.nt1 [InPrefetch], %u",
-	       $unroll_count * $phases);
-	    &I(\$c, "lfetch.excl.nt1 [OutPrefetch], %u",
-	       $unroll_count * $phases);
-	    &I(\$c, "br.cloop.sptk.few .rc4Loop");
-	}
-    }
-
-    if ($pByp) {
-	&P(\$bypass, ".rc4Bypass%u:", $label);
-	&I(\$bypass, "sub J = J, SI[%u]", $i0 % $NSI);
-	&I(\$bypass, "nop 0");
-	&I(\$bypass, "nop 0");
-	&I(\$bypass, ";;");
-	&I(\$bypass, "add J = J, SI[%u]", $i1 % $NSI);
-	&I(\$bypass, "mov SI[%u] = SI[%u]", $i0 % $NSI, $i1 % $NSI);
-	&I(\$bypass, "br.sptk.many .rc4Resume%u\n", $label);
-	&I(\$bypass, ";;");
-    }
-}
-
-$code=<<___;
-.ident \"rc4-ia64.s, version 3.0\"
-.ident \"Copyright (c) 2005 Hewlett-Packard Development Company, L.P.\"
-
-#define LCSave		r8
-#define PRSave		r9
-
-/* Inputs become invalid once rotation begins!  */
-
-#define StateTable	in0
-#define DataLen		in1
-#define InputBuffer	in2
-#define OutputBuffer	in3
-
-#define KTable		r14
-#define J		r15
-#define InPtr		r16
-#define OutPtr		r17
-#define InPrefetch	r18
-#define OutPrefetch	r19
-#define One		r20
-#define LoopCount	r21
-#define Remainder	r22
-#define IFinal		r23
-#define EndPtr		r24
-
-#define tmp0		r25
-#define tmp1		r26
-
-#define pBypass		p6
-#define pDone		p7
-#define pSmall		p8
-#define pAligned	p9
-#define pUnaligned	p10
-
-#define pComputeI	pPhase[0]
-#define pComputeJ	pPhase[1]
-#define pComputeT	pPhase[2]
-#define pOutput		pPhase[3]
-
-#define RetVal		r8
-#define L_OK		p7
-#define L_NOK		p8
-
-#define	_NINPUTS	4
-#define	_NOUTPUT	0
-
-#define	_NROTATE	24
-#define	_NLOCALS	(_NROTATE - _NINPUTS - _NOUTPUT)
-
-#ifndef SZ
-# define SZ	4	// this must be set to sizeof(RC4_INT)
-#endif
-
-#if SZ == 1
-# define LKEY			ld1
-# define SKEY			st1
-# define KEYADDR(dst, i)	add dst = i, KTable
-#elif SZ == 2
-# define LKEY			ld2
-# define SKEY			st2
-# define KEYADDR(dst, i)	shladd dst = i, 1, KTable
-#elif SZ == 4
-# define LKEY			ld4
-# define SKEY			st4
-# define KEYADDR(dst, i)	shladd dst = i, 2, KTable
-#else
-# define LKEY			ld8
-# define SKEY			st8
-# define KEYADDR(dst, i)	shladd dst = i, 3, KTable
-#endif
-
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-# define ADDP	addp4
-#else
-# define ADDP	add
-#endif
-
-/* Define a macro for the bit number of the n-th byte: */
-
-#if defined(_HPUX_SOURCE) || defined(B_ENDIAN)
-# define HOST_IS_BIG_ENDIAN
-# define BYTE_POS(n)	(56 - (8 * (n)))
-#else
-# define BYTE_POS(n)	(8 * (n))
-#endif
-
-/*
-   We must perform the first phase of the pipeline explicitly since
-   we will always load from the stable the first time. The br.cexit
-   will never be taken since regardless of the number of bytes because
-   the epilogue count is 4.
-*/
-/* MODSCHED_RC4 macro was split to _PROLOGUE and _LOOP, because HP-UX
-   assembler failed on original macro with syntax error. <appro> */
-#define MODSCHED_RC4_PROLOGUE						   \\
-	{								   \\
-				ld1		Data[0] = [InPtr], 1;	   \\
-				add		IFinal = 1, I[1];	   \\
-				KEYADDR(IPr[0], I[1]);			   \\
-	} ;;								   \\
-	{								   \\
-				LKEY		SI[0] = [IPr[0]];	   \\
-				mov		pr.rot = 0x10000;	   \\
-				mov		ar.ec = 4;		   \\
-	} ;;								   \\
-	{								   \\
-				add		J = J, SI[0];		   \\
-				zxt1		I[0] = IFinal;		   \\
-				br.cexit.spnt.few .+16; /* never taken */  \\
-	} ;;
-#define MODSCHED_RC4_LOOP(label)					   \\
-label:									   \\
-	{	.mmi;							   \\
-		(pComputeI)	ld1		Data[0] = [InPtr], 1;	   \\
-		(pComputeI)	add		IFinal = 1, I[1];	   \\
-		(pComputeJ)	zxt1		J = J;			   \\
-	}{	.mmi;							   \\
-		(pOutput)	LKEY		T[1] = [T[1]];		   \\
-		(pComputeT)	add		T[0] = SI[2], SJ[1];	   \\
-		(pComputeI)	KEYADDR(IPr[0], I[1]);			   \\
-	} ;;								   \\
-	{	.mmi;							   \\
-		(pComputeT)	SKEY		[IPr[2]] = SJ[1];	   \\
-		(pComputeT)	SKEY		[JP[1]] = SI[2];	   \\
-		(pComputeT)	zxt1		T[0] = T[0];		   \\
-	}{	.mmi;							   \\
-		(pComputeI)	LKEY		SI[0] = [IPr[0]];	   \\
-		(pComputeJ)	KEYADDR(JP[0], J);			   \\
-		(pComputeI)	cmp.eq.unc	pBypass, p0 = I[1], J;	   \\
-	} ;;								   \\
-	{	.mmi;							   \\
-		(pComputeJ)	LKEY		SJ[0] = [JP[0]];	   \\
-		(pOutput)	xor		Data[3] = Data[3], T[1];   \\
-				nop		0x0;			   \\
-	}{	.mmi;							   \\
-		(pComputeT)	KEYADDR(T[0], T[0]);			   \\
-		(pBypass)	mov		SI[0] = SI[1];		   \\
-		(pComputeI)	zxt1		I[0] = IFinal;		   \\
-	} ;;								   \\
-	{	.mmb;							   \\
-		(pOutput)	st1		[OutPtr] = Data[3], 1;	   \\
-		(pComputeI)	add		J = J, SI[0];		   \\
-				br.ctop.sptk.few label;			   \\
-	} ;;
-
-	.text
-
-	.align	32
-
-	.type	RC4, \@function
-	.global	RC4
-
-	.proc	RC4
-	.prologue
-
-RC4:
-	{
-	  	.mmi
-		alloc	r2 = ar.pfs, _NINPUTS, _NLOCALS, _NOUTPUT, _NROTATE
-
-		.rotr Data[4], I[2], IPr[3], SI[3], JP[2], SJ[2], T[2], \\
-		      OutWord[2]
-		.rotp pPhase[4]
-
-		ADDP		InPrefetch = 0, InputBuffer
-		ADDP		KTable = 0, StateTable
-	}
-	{
-		.mmi
-		ADDP		InPtr = 0, InputBuffer
-		ADDP		OutPtr = 0, OutputBuffer
-		mov		RetVal = r0
-	}
-	;;
-	{
-		.mmi
-		lfetch.nt1	[InPrefetch], 0x80
-		ADDP		OutPrefetch = 0, OutputBuffer
-	}
-	{               // Return 0 if the input length is nonsensical
-        	.mib
-		ADDP		StateTable = 0, StateTable
-        	cmp.ge.unc  	L_NOK, L_OK = r0, DataLen
-	(L_NOK) br.ret.sptk.few rp
-	}
-	;;
-	{
-        	.mib
-        	cmp.eq.or  	L_NOK, L_OK = r0, InPtr
-        	cmp.eq.or  	L_NOK, L_OK = r0, OutPtr
-		nop		0x0
-	}
-	{
-		.mib
-        	cmp.eq.or  	L_NOK, L_OK = r0, StateTable
-		nop		0x0
-	(L_NOK) br.ret.sptk.few rp
-	}
-	;;
-		LKEY		I[1] = [KTable], SZ
-/* Prefetch the state-table. It contains 256 elements of size SZ */
-
-#if SZ == 1
-		ADDP		tmp0 = 1*128, StateTable
-#elif SZ == 2
-		ADDP		tmp0 = 3*128, StateTable
-		ADDP		tmp1 = 2*128, StateTable
-#elif SZ == 4
-		ADDP		tmp0 = 7*128, StateTable
-		ADDP		tmp1 = 6*128, StateTable
-#elif SZ == 8
-		ADDP		tmp0 = 15*128, StateTable
-		ADDP		tmp1 = 14*128, StateTable
-#endif
-		;;
-#if SZ >= 8
-		lfetch.fault.nt1		[tmp0], -256	// 15
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	// 13
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	// 11
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	//  9
-		lfetch.fault.nt1		[tmp1], -256;;
-#endif
-#if SZ >= 4
-		lfetch.fault.nt1		[tmp0], -256	//  7
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	//  5
-		lfetch.fault.nt1		[tmp1], -256;;
-#endif
-#if SZ >= 2
-		lfetch.fault.nt1		[tmp0], -256	//  3
-		lfetch.fault.nt1		[tmp1], -256;;
-#endif
-	{
-		.mii
-		lfetch.fault.nt1		[tmp0]		//  1
-		add		I[1]=1,I[1];;
-		zxt1		I[1]=I[1]
-	}
-	{
-		.mmi
-		lfetch.nt1	[InPrefetch], 0x80
-		lfetch.excl.nt1	[OutPrefetch], 0x80
-		.save		pr, PRSave
-		mov		PRSave = pr
-	} ;;
-	{
-		.mmi
-		lfetch.excl.nt1	[OutPrefetch], 0x80
-		LKEY		J = [KTable], SZ
-		ADDP		EndPtr = DataLen, InPtr
-	}  ;;
-	{
-		.mmi
-		ADDP		EndPtr = -1, EndPtr	// Make it point to
-							// last data byte.
-		mov		One = 1
-		.save		ar.lc, LCSave
-		mov		LCSave = ar.lc
-		.body
-	} ;;
-	{
-		.mmb
-		sub		Remainder = 0, OutPtr
-		cmp.gtu		pSmall, p0 = $threshold, DataLen
-(pSmall)	br.cond.dpnt	.rc4Remainder		// Data too small for
-							// big loop.
-	} ;;
-	{
-		.mmi
-		and		Remainder = 0x7, Remainder
-		;;
-		cmp.eq		pAligned, pUnaligned = Remainder, r0
-		nop		0x0
-	} ;;
-	{
-		.mmb
-.pred.rel	"mutex",pUnaligned,pAligned
-(pUnaligned)	add		Remainder = -1, Remainder
-(pAligned)	sub		Remainder = EndPtr, InPtr
-(pAligned)	br.cond.dptk.many .rc4Aligned
-	} ;;
-	{
-		.mmi
-		nop		0x0
-		nop		0x0
-		mov.i		ar.lc = Remainder
-	}
-
-/* Do the initial few bytes via the compact, modulo-scheduled loop
-   until the output pointer is 8-byte-aligned.  */
-
-		MODSCHED_RC4_PROLOGUE
-		MODSCHED_RC4_LOOP(.RC4AlignLoop)
-
-	{
-		.mib
-		sub		Remainder = EndPtr, InPtr
-		zxt1		IFinal = IFinal
-		clrrrb				// Clear CFM.rrb.pr so
-		;;				// next "mov pr.rot = N"
-						// does the right thing.
-	}
-	{
-		.mmi
-		mov		I[1] = IFinal
-		nop		0x0
-		nop		0x0
-	} ;;
-
-
-.rc4Aligned:
-
-/*
-   Unrolled loop count = (Remainder - ($unroll_count+1)*$phases)/($unroll_count*$phases)
- */
-
-	{
-		.mlx
-		add	LoopCount = 1 - ($unroll_count + 1)*$phases, Remainder
-		movl		Remainder = 0xaaaaaaaaaaaaaaab
-	} ;;
-	{
-		.mmi
-		setf.sig	f6 = LoopCount		// M2, M3	6 cyc
-		setf.sig	f7 = Remainder		// M2, M3	6 cyc
-		nop		0x0
-	} ;;
-	{
-		.mfb
-		nop		0x0
-		xmpy.hu		f6 = f6, f7
-		nop		0x0
-	} ;;
-	{
-		.mmi
-		getf.sig	LoopCount = f6;;	// M2		5 cyc
-		nop		0x0
-		shr.u		LoopCount = LoopCount, 4
-	} ;;
-	{
-		.mmi
-		nop		0x0
-		nop		0x0
-		mov.i		ar.lc = LoopCount
-	} ;;
-
-/* Now comes the unrolled loop: */
-
-.rc4Prologue:
-___
-
-$iteration = 0;
-
-# Generate the prologue:
-$predicates = 1;
-for ($i = 0; $i < $phases; ++$i) {
-    &emit_body (\$code, \$bypass, $iteration++, $predicates);
-    $predicates = ($predicates << 1) | 1;
-}
-
-$code.=<<___;
-.rc4Loop:
-___
-
-# Generate the body:
-for ($i = 0; $i < $unroll_count*$phases; ++$i) {
-    &emit_body (\$code, \$bypass, $iteration++, $predicates);
-}
-
-$code.=<<___;
-.rc4Epilogue:
-___
-
-# Generate the epilogue:
-for ($i = 0; $i < $phases; ++$i) {
-    $predicates <<= 1;
-    &emit_body (\$code, \$bypass, $iteration++, $predicates);
-}
-
-$code.=<<___;
-	{
-		.mmi
-		lfetch.nt1	[EndPtr]	// fetch line with last byte
-		mov		IFinal = I[1]
-		nop		0x0
-	}
-
-.rc4Remainder:
-	{
-		.mmi
-		sub		Remainder = EndPtr, InPtr	// Calculate
-								// # of bytes
-								// left - 1
-		nop		0x0
-		nop		0x0
-	} ;;
-	{
-		.mib
-		cmp.eq		pDone, p0 = -1, Remainder // done already?
-		mov.i		ar.lc = Remainder
-(pDone)		br.cond.dptk.few .rc4Complete
-	}
-
-/* Do the remaining bytes via the compact, modulo-scheduled loop */
-
-		MODSCHED_RC4_PROLOGUE
-		MODSCHED_RC4_LOOP(.RC4RestLoop)
-
-.rc4Complete:
-	{
-		.mmi
-		add		KTable = -SZ, KTable
-		add		IFinal = -1, IFinal
-		mov		ar.lc = LCSave
-	} ;;
-	{
-		.mii
-		SKEY		[KTable] = J,-SZ
-		zxt1		IFinal = IFinal
-		mov		pr = PRSave, 0x1FFFF
-	} ;;
-	{
-		.mib
-		SKEY		[KTable] = IFinal
-		add		RetVal = 1, r0
-		br.ret.sptk.few	rp
-	} ;;
-___
-
-# Last but not least, emit the code for the bypass-code of the unrolled loop:
-
-$code.=$bypass;
-
-$code.=<<___;
-	.endp RC4
-___
-
-print $code;
diff --git a/openssl/crypto/rc4/asm/rc4-s390x.pl b/openssl/crypto/rc4/asm/rc4-s390x.pl
deleted file mode 100644
index 96681fa0..00000000
--- a/openssl/crypto/rc4/asm/rc4-s390x.pl
+++ /dev/null
@@ -1,205 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# February 2009
-#
-# Performance is 2x of gcc 3.4.6 on z10. Coding "secret" is to
-# "cluster" Address Generation Interlocks, so that one pipeline stall
-# resolves several dependencies.
-
-$rp="%r14";
-$sp="%r15";
-$code=<<___;
-.text
-
-___
-
-# void RC4(RC4_KEY *key,size_t len,const void *inp,void *out)
-{
-$acc="%r0";
-$cnt="%r1";
-$key="%r2";
-$len="%r3";
-$inp="%r4";
-$out="%r5";
-
-@XX=("%r6","%r7");
-@TX=("%r8","%r9");
-$YY="%r10";
-$TY="%r11";
-
-$code.=<<___;
-.globl	RC4
-.type	RC4,\@function
-.align	64
-RC4:
-	stmg	%r6,%r11,48($sp)
-	llgc	$XX[0],0($key)
-	llgc	$YY,1($key)
-	la	$XX[0],1($XX[0])
-	nill	$XX[0],0xff
-	srlg	$cnt,$len,3
-	ltgr	$cnt,$cnt
-	llgc	$TX[0],2($XX[0],$key)
-	jz	.Lshort
-	j	.Loop8
-
-.align	64
-.Loop8:
-___
-for ($i=0;$i<8;$i++) {
-$code.=<<___;
-	la	$YY,0($YY,$TX[0])	# $i
-	nill	$YY,255
-	la	$XX[1],1($XX[0])
-	nill	$XX[1],255
-___
-$code.=<<___ if ($i==1);
-	llgc	$acc,2($TY,$key)
-___
-$code.=<<___ if ($i>1);
-	sllg	$acc,$acc,8
-	ic	$acc,2($TY,$key)
-___
-$code.=<<___;
-	llgc	$TY,2($YY,$key)
-	stc	$TX[0],2($YY,$key)
-	llgc	$TX[1],2($XX[1],$key)
-	stc	$TY,2($XX[0],$key)
-	cr	$XX[1],$YY
-	jne	.Lcmov$i
-	la	$TX[1],0($TX[0])
-.Lcmov$i:
-	la	$TY,0($TY,$TX[0])
-	nill	$TY,255
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));     # "rotate" registers
-}
-
-$code.=<<___;
-	lg	$TX[1],0($inp)
-	sllg	$acc,$acc,8
-	la	$inp,8($inp)
-	ic	$acc,2($TY,$key)
-	xgr	$acc,$TX[1]
-	stg	$acc,0($out)
-	la	$out,8($out)
-	brct	$cnt,.Loop8
-
-.Lshort:
-	lghi	$acc,7
-	ngr	$len,$acc
-	jz	.Lexit
-	j	.Loop1
-
-.align	16
-.Loop1:
-	la	$YY,0($YY,$TX[0])
-	nill	$YY,255
-	llgc	$TY,2($YY,$key)
-	stc	$TX[0],2($YY,$key)
-	stc	$TY,2($XX[0],$key)
-	ar	$TY,$TX[0]
-	ahi	$XX[0],1
-	nill	$TY,255
-	nill	$XX[0],255
-	llgc	$acc,0($inp)
-	la	$inp,1($inp)
-	llgc	$TY,2($TY,$key)
-	llgc	$TX[0],2($XX[0],$key)
-	xr	$acc,$TY
-	stc	$acc,0($out)
-	la	$out,1($out)
-	brct	$len,.Loop1
-
-.Lexit:
-	ahi	$XX[0],-1
-	stc	$XX[0],0($key)
-	stc	$YY,1($key)
-	lmg	%r6,%r11,48($sp)
-	br	$rp
-.size	RC4,.-RC4
-.string	"RC4 for s390x, CRYPTOGAMS by <appro\@openssl.org>"
-
-___
-}
-
-# void RC4_set_key(RC4_KEY *key,unsigned int len,const void *inp)
-{
-$cnt="%r0";
-$idx="%r1";
-$key="%r2";
-$len="%r3";
-$inp="%r4";
-$acc="%r5";
-$dat="%r6";
-$ikey="%r7";
-$iinp="%r8";
-
-$code.=<<___;
-.globl	RC4_set_key
-.type	RC4_set_key,\@function
-.align	64
-RC4_set_key:
-	stmg	%r6,%r8,48($sp)
-	lhi	$cnt,256
-	la	$idx,0(%r0)
-	sth	$idx,0($key)
-.align	4
-.L1stloop:
-	stc	$idx,2($idx,$key)
-	la	$idx,1($idx)
-	brct	$cnt,.L1stloop
-
-	lghi	$ikey,-256
-	lr	$cnt,$len
-	la	$iinp,0(%r0)
-	la	$idx,0(%r0)
-.align	16
-.L2ndloop:
-	llgc	$acc,2+256($ikey,$key)
-	llgc	$dat,0($iinp,$inp)
-	la	$idx,0($idx,$acc)
-	la	$ikey,1($ikey)
-	la	$idx,0($idx,$dat)
-	nill	$idx,255
-	la	$iinp,1($iinp)
-	tml	$ikey,255
-	llgc	$dat,2($idx,$key)
-	stc	$dat,2+256-1($ikey,$key)
-	stc	$acc,2($idx,$key)
-	jz	.Ldone
-	brct	$cnt,.L2ndloop
-	lr	$cnt,$len
-	la	$iinp,0(%r0)
-	j	.L2ndloop
-.Ldone:
-	lmg	%r6,%r8,48($sp)
-	br	$rp
-.size	RC4_set_key,.-RC4_set_key
-
-___
-}
-
-# const char *RC4_options()
-$code.=<<___;
-.globl	RC4_options
-.type	RC4_options,\@function
-.align	16
-RC4_options:
-	larl	%r2,.Loptions
-	br	%r14
-.size	RC4_options,.-RC4_options
-.section	.rodata
-.Loptions:
-.align	8
-.string	"rc4(8x,char)"
-___
-
-print $code;
diff --git a/openssl/crypto/rc4/asm/rc4-x86_64.pl b/openssl/crypto/rc4/asm/rc4-x86_64.pl
deleted file mode 100755
index 677be5fe..00000000
--- a/openssl/crypto/rc4/asm/rc4-x86_64.pl
+++ /dev/null
@@ -1,504 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# 2.22x RC4 tune-up:-) It should be noted though that my hand [as in
-# "hand-coded assembler"] doesn't stand for the whole improvement
-# coefficient. It turned out that eliminating RC4_CHAR from config
-# line results in ~40% improvement (yes, even for C implementation).
-# Presumably it has everything to do with AMD cache architecture and
-# RAW or whatever penalties. Once again! The module *requires* config
-# line *without* RC4_CHAR! As for coding "secret," I bet on partial
-# register arithmetics. For example instead of 'inc %r8; and $255,%r8'
-# I simply 'inc %r8b'. Even though optimization manual discourages
-# to operate on partial registers, it turned out to be the best bet.
-# At least for AMD... How IA32E would perform remains to be seen...
-
-# As was shown by Marc Bevand reordering of couple of load operations
-# results in even higher performance gain of 3.3x:-) At least on
-# Opteron... For reference, 1x in this case is RC4_CHAR C-code
-# compiled with gcc 3.3.2, which performs at ~54MBps per 1GHz clock.
-# Latter means that if you want to *estimate* what to expect from
-# *your* Opteron, then multiply 54 by 3.3 and clock frequency in GHz.
-
-# Intel P4 EM64T core was found to run the AMD64 code really slow...
-# The only way to achieve comparable performance on P4 was to keep
-# RC4_CHAR. Kind of ironic, huh? As it's apparently impossible to
-# compose blended code, which would perform even within 30% marginal
-# on either AMD and Intel platforms, I implement both cases. See
-# rc4_skey.c for further details...
-
-# P4 EM64T core appears to be "allergic" to 64-bit inc/dec. Replacing 
-# those with add/sub results in 50% performance improvement of folded
-# loop...
-
-# As was shown by Zou Nanhai loop unrolling can improve Intel EM64T
-# performance by >30% [unlike P4 32-bit case that is]. But this is
-# provided that loads are reordered even more aggressively! Both code
-# pathes, AMD64 and EM64T, reorder loads in essentially same manner
-# as my IA-64 implementation. On Opteron this resulted in modest 5%
-# improvement [I had to test it], while final Intel P4 performance
-# achieves respectful 432MBps on 2.8GHz processor now. For reference.
-# If executed on Xeon, current RC4_CHAR code-path is 2.7x faster than
-# RC4_INT code-path. While if executed on Opteron, it's only 25%
-# slower than the RC4_INT one [meaning that if CPU µ-arch detection
-# is not implemented, then this final RC4_CHAR code-path should be
-# preferred, as it provides better *all-round* performance].
-
-# Intel Core2 was observed to perform poorly on both code paths:-( It
-# apparently suffers from some kind of partial register stall, which
-# occurs in 64-bit mode only [as virtually identical 32-bit loop was
-# observed to outperform 64-bit one by almost 50%]. Adding two movzb to
-# cloop1 boosts its performance by 80%! This loop appears to be optimal
-# fit for Core2 and therefore the code was modified to skip cloop8 on
-# this CPU.
-
-$flavour = shift;
-$output  = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
-
-$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-die "can't locate x86_64-xlate.pl";
-
-open STDOUT,"| $^X $xlate $flavour $output";
-
-$dat="%rdi";	    # arg1
-$len="%rsi";	    # arg2
-$inp="%rdx";	    # arg3
-$out="%rcx";	    # arg4
-
-@XX=("%r8","%r10");
-@TX=("%r9","%r11");
-$YY="%r12";
-$TY="%r13";
-
-$code=<<___;
-.text
-
-.globl	RC4
-.type	RC4,\@function,4
-.align	16
-RC4:	or	$len,$len
-	jne	.Lentry
-	ret
-.Lentry:
-	push	%rbx
-	push	%r12
-	push	%r13
-.Lprologue:
-
-	add	\$8,$dat
-	movl	-8($dat),$XX[0]#d
-	movl	-4($dat),$YY#d
-	cmpl	\$-1,256($dat)
-	je	.LRC4_CHAR
-	inc	$XX[0]#b
-	movl	($dat,$XX[0],4),$TX[0]#d
-	test	\$-8,$len
-	jz	.Lloop1
-	jmp	.Lloop8
-.align	16
-.Lloop8:
-___
-for ($i=0;$i<8;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	mov	$XX[0],$XX[1]
-	movl	($dat,$YY,4),$TY#d
-	ror	\$8,%rax			# ror is redundant when $i=0
-	inc	$XX[1]#b
-	movl	($dat,$XX[1],4),$TX[1]#d
-	cmp	$XX[1],$YY
-	movl	$TX[0]#d,($dat,$YY,4)
-	cmove	$TX[0],$TX[1]
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TX[0]#b,$TY#b
-	movb	($dat,$TY,4),%al
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-$code.=<<___;
-	ror	\$8,%rax
-	sub	\$8,$len
-
-	xor	($inp),%rax
-	add	\$8,$inp
-	mov	%rax,($out)
-	add	\$8,$out
-
-	test	\$-8,$len
-	jnz	.Lloop8
-	cmp	\$0,$len
-	jne	.Lloop1
-	jmp	.Lexit
-
-.align	16
-.Lloop1:
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TY#b,$TX[0]#b
-	inc	$XX[0]#b
-	movl	($dat,$TX[0],4),$TY#d
-	movl	($dat,$XX[0],4),$TX[0]#d
-	xorb	($inp),$TY#b
-	inc	$inp
-	movb	$TY#b,($out)
-	inc	$out
-	dec	$len
-	jnz	.Lloop1
-	jmp	.Lexit
-
-.align	16
-.LRC4_CHAR:
-	add	\$1,$XX[0]#b
-	movzb	($dat,$XX[0]),$TX[0]#d
-	test	\$-8,$len
-	jz	.Lcloop1
-	cmpl	\$0,260($dat)
-	jnz	.Lcloop1
-	jmp	.Lcloop8
-.align	16
-.Lcloop8:
-	mov	($inp),%eax
-	mov	4($inp),%ebx
-___
-# unroll 2x4-wise, because 64-bit rotates kill Intel P4...
-for ($i=0;$i<4;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	lea	1($XX[0]),$XX[1]
-	movzb	($dat,$YY),$TY#d
-	movzb	$XX[1]#b,$XX[1]#d
-	movzb	($dat,$XX[1]),$TX[1]#d
-	movb	$TX[0]#b,($dat,$YY)
-	cmp	$XX[1],$YY
-	movb	$TY#b,($dat,$XX[0])
-	jne	.Lcmov$i			# Intel cmov is sloooow...
-	mov	$TX[0],$TX[1]
-.Lcmov$i:
-	add	$TX[0]#b,$TY#b
-	xor	($dat,$TY),%al
-	ror	\$8,%eax
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-for ($i=4;$i<8;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	lea	1($XX[0]),$XX[1]
-	movzb	($dat,$YY),$TY#d
-	movzb	$XX[1]#b,$XX[1]#d
-	movzb	($dat,$XX[1]),$TX[1]#d
-	movb	$TX[0]#b,($dat,$YY)
-	cmp	$XX[1],$YY
-	movb	$TY#b,($dat,$XX[0])
-	jne	.Lcmov$i			# Intel cmov is sloooow...
-	mov	$TX[0],$TX[1]
-.Lcmov$i:
-	add	$TX[0]#b,$TY#b
-	xor	($dat,$TY),%bl
-	ror	\$8,%ebx
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-$code.=<<___;
-	lea	-8($len),$len
-	mov	%eax,($out)
-	lea	8($inp),$inp
-	mov	%ebx,4($out)
-	lea	8($out),$out
-
-	test	\$-8,$len
-	jnz	.Lcloop8
-	cmp	\$0,$len
-	jne	.Lcloop1
-	jmp	.Lexit
-___
-$code.=<<___;
-.align	16
-.Lcloop1:
-	add	$TX[0]#b,$YY#b
-	movzb	($dat,$YY),$TY#d
-	movb	$TX[0]#b,($dat,$YY)
-	movb	$TY#b,($dat,$XX[0])
-	add	$TX[0]#b,$TY#b
-	add	\$1,$XX[0]#b
-	movzb	$TY#b,$TY#d
-	movzb	$XX[0]#b,$XX[0]#d
-	movzb	($dat,$TY),$TY#d
-	movzb	($dat,$XX[0]),$TX[0]#d
-	xorb	($inp),$TY#b
-	lea	1($inp),$inp
-	movb	$TY#b,($out)
-	lea	1($out),$out
-	sub	\$1,$len
-	jnz	.Lcloop1
-	jmp	.Lexit
-
-.align	16
-.Lexit:
-	sub	\$1,$XX[0]#b
-	movl	$XX[0]#d,-8($dat)
-	movl	$YY#d,-4($dat)
-
-	mov	(%rsp),%r13
-	mov	8(%rsp),%r12
-	mov	16(%rsp),%rbx
-	add	\$24,%rsp
-.Lepilogue:
-	ret
-.size	RC4,.-RC4
-___
-
-$idx="%r8";
-$ido="%r9";
-
-$code.=<<___;
-.extern	OPENSSL_ia32cap_P
-.globl	RC4_set_key
-.type	RC4_set_key,\@function,3
-.align	16
-RC4_set_key:
-	lea	8($dat),$dat
-	lea	($inp,$len),$inp
-	neg	$len
-	mov	$len,%rcx
-	xor	%eax,%eax
-	xor	$ido,$ido
-	xor	%r10,%r10
-	xor	%r11,%r11
-
-	mov	OPENSSL_ia32cap_P(%rip),$idx#d
-	bt	\$20,$idx#d
-	jnc	.Lw1stloop
-	bt	\$30,$idx#d
-	setc	$ido#b
-	mov	$ido#d,260($dat)
-	jmp	.Lc1stloop
-
-.align	16
-.Lw1stloop:
-	mov	%eax,($dat,%rax,4)
-	add	\$1,%al
-	jnc	.Lw1stloop
-
-	xor	$ido,$ido
-	xor	$idx,$idx
-.align	16
-.Lw2ndloop:
-	mov	($dat,$ido,4),%r10d
-	add	($inp,$len,1),$idx#b
-	add	%r10b,$idx#b
-	add	\$1,$len
-	mov	($dat,$idx,4),%r11d
-	cmovz	%rcx,$len
-	mov	%r10d,($dat,$idx,4)
-	mov	%r11d,($dat,$ido,4)
-	add	\$1,$ido#b
-	jnc	.Lw2ndloop
-	jmp	.Lexit_key
-
-.align	16
-.Lc1stloop:
-	mov	%al,($dat,%rax)
-	add	\$1,%al
-	jnc	.Lc1stloop
-
-	xor	$ido,$ido
-	xor	$idx,$idx
-.align	16
-.Lc2ndloop:
-	mov	($dat,$ido),%r10b
-	add	($inp,$len),$idx#b
-	add	%r10b,$idx#b
-	add	\$1,$len
-	mov	($dat,$idx),%r11b
-	jnz	.Lcnowrap
-	mov	%rcx,$len
-.Lcnowrap:
-	mov	%r10b,($dat,$idx)
-	mov	%r11b,($dat,$ido)
-	add	\$1,$ido#b
-	jnc	.Lc2ndloop
-	movl	\$-1,256($dat)
-
-.align	16
-.Lexit_key:
-	xor	%eax,%eax
-	mov	%eax,-8($dat)
-	mov	%eax,-4($dat)
-	ret
-.size	RC4_set_key,.-RC4_set_key
-
-.globl	RC4_options
-.type	RC4_options,\@abi-omnipotent
-.align	16
-RC4_options:
-	lea	.Lopts(%rip),%rax
-	mov	OPENSSL_ia32cap_P(%rip),%edx
-	bt	\$20,%edx
-	jnc	.Ldone
-	add	\$12,%rax
-	bt	\$30,%edx
-	jnc	.Ldone
-	add	\$13,%rax
-.Ldone:
-	ret
-.align	64
-.Lopts:
-.asciz	"rc4(8x,int)"
-.asciz	"rc4(8x,char)"
-.asciz	"rc4(1x,char)"
-.asciz	"RC4 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
-.align	64
-.size	RC4_options,.-RC4_options
-___
-
-# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
-#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
-if ($win64) {
-$rec="%rcx";
-$frame="%rdx";
-$context="%r8";
-$disp="%r9";
-
-$code.=<<___;
-.extern	__imp_RtlVirtualUnwind
-.type	stream_se_handler,\@abi-omnipotent
-.align	16
-stream_se_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	120($context),%rax	# pull context->Rax
-	mov	248($context),%rbx	# pull context->Rip
-
-	lea	.Lprologue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip<prologue label
-	jb	.Lin_prologue
-
-	mov	152($context),%rax	# pull context->Rsp
-
-	lea	.Lepilogue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip>=epilogue label
-	jae	.Lin_prologue
-
-	lea	24(%rax),%rax
-
-	mov	-8(%rax),%rbx
-	mov	-16(%rax),%r12
-	mov	-24(%rax),%r13
-	mov	%rbx,144($context)	# restore context->Rbx
-	mov	%r12,216($context)	# restore context->R12
-	mov	%r13,224($context)	# restore context->R13
-
-.Lin_prologue:
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rax,152($context)	# restore context->Rsp
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-	jmp	.Lcommon_seh_exit
-.size	stream_se_handler,.-stream_se_handler
-
-.type	key_se_handler,\@abi-omnipotent
-.align	16
-key_se_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	152($context),%rax	# pull context->Rsp
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-.Lcommon_seh_exit:
-
-	mov	40($disp),%rdi		# disp->ContextRecord
-	mov	$context,%rsi		# context
-	mov	\$154,%ecx		# sizeof(CONTEXT)
-	.long	0xa548f3fc		# cld; rep movsq
-
-	mov	$disp,%rsi
-	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
-	mov	0(%rsi),%r8		# arg3, disp->ControlPc
-	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
-	mov	40(%rsi),%r10		# disp->ContextRecord
-	lea	56(%rsi),%r11		# &disp->HandlerData
-	lea	24(%rsi),%r12		# &disp->EstablisherFrame
-	mov	%r10,32(%rsp)		# arg5
-	mov	%r11,40(%rsp)		# arg6
-	mov	%r12,48(%rsp)		# arg7
-	mov	%rcx,56(%rsp)		# arg8, (NULL)
-	call	*__imp_RtlVirtualUnwind(%rip)
-
-	mov	\$1,%eax		# ExceptionContinueSearch
-	add	\$64,%rsp
-	popfq
-	pop	%r15
-	pop	%r14
-	pop	%r13
-	pop	%r12
-	pop	%rbp
-	pop	%rbx
-	pop	%rdi
-	pop	%rsi
-	ret
-.size	key_se_handler,.-key_se_handler
-
-.section	.pdata
-.align	4
-	.rva	.LSEH_begin_RC4
-	.rva	.LSEH_end_RC4
-	.rva	.LSEH_info_RC4
-
-	.rva	.LSEH_begin_RC4_set_key
-	.rva	.LSEH_end_RC4_set_key
-	.rva	.LSEH_info_RC4_set_key
-
-.section	.xdata
-.align	8
-.LSEH_info_RC4:
-	.byte	9,0,0,0
-	.rva	stream_se_handler
-.LSEH_info_RC4_set_key:
-	.byte	9,0,0,0
-	.rva	key_se_handler
-___
-}
-
-$code =~ s/#([bwd])/$1/gm;
-
-print $code;
-
-close STDOUT;