Initial import

1 files changed, 504 insertions, 0 deletions

diff --git a/openssl/crypto/rc4/asm/rc4-x86_64.pl b/openssl/crypto/rc4/asm/rc4-x86_64.pl
new file mode 100755
index 00000000..677be5fe
--- /dev/null
+++ b/openssl/crypto/rc4/asm/rc4-x86_64.pl
@@ -0,0 +1,504 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# 2.22x RC4 tune-up:-) It should be noted though that my hand [as in
+# "hand-coded assembler"] doesn't stand for the whole improvement
+# coefficient. It turned out that eliminating RC4_CHAR from config
+# line results in ~40% improvement (yes, even for C implementation).
+# Presumably it has everything to do with AMD cache architecture and
+# RAW or whatever penalties. Once again! The module *requires* config
+# line *without* RC4_CHAR! As for coding "secret," I bet on partial
+# register arithmetics. For example instead of 'inc %r8; and $255,%r8'
+# I simply 'inc %r8b'. Even though optimization manual discourages
+# to operate on partial registers, it turned out to be the best bet.
+# At least for AMD... How IA32E would perform remains to be seen...
+
+# As was shown by Marc Bevand reordering of couple of load operations
+# results in even higher performance gain of 3.3x:-) At least on
+# Opteron... For reference, 1x in this case is RC4_CHAR C-code
+# compiled with gcc 3.3.2, which performs at ~54MBps per 1GHz clock.
+# Latter means that if you want to *estimate* what to expect from
+# *your* Opteron, then multiply 54 by 3.3 and clock frequency in GHz.
+
+# Intel P4 EM64T core was found to run the AMD64 code really slow...
+# The only way to achieve comparable performance on P4 was to keep
+# RC4_CHAR. Kind of ironic, huh? As it's apparently impossible to
+# compose blended code, which would perform even within 30% marginal
+# on either AMD and Intel platforms, I implement both cases. See
+# rc4_skey.c for further details...
+
+# P4 EM64T core appears to be "allergic" to 64-bit inc/dec. Replacing 
+# those with add/sub results in 50% performance improvement of folded
+# loop...
+
+# As was shown by Zou Nanhai loop unrolling can improve Intel EM64T
+# performance by >30% [unlike P4 32-bit case that is]. But this is
+# provided that loads are reordered even more aggressively! Both code
+# pathes, AMD64 and EM64T, reorder loads in essentially same manner
+# as my IA-64 implementation. On Opteron this resulted in modest 5%
+# improvement [I had to test it], while final Intel P4 performance
+# achieves respectful 432MBps on 2.8GHz processor now. For reference.
+# If executed on Xeon, current RC4_CHAR code-path is 2.7x faster than
+# RC4_INT code-path. While if executed on Opteron, it's only 25%
+# slower than the RC4_INT one [meaning that if CPU µ-arch detection
+# is not implemented, then this final RC4_CHAR code-path should be
+# preferred, as it provides better *all-round* performance].
+
+# Intel Core2 was observed to perform poorly on both code paths:-( It
+# apparently suffers from some kind of partial register stall, which
+# occurs in 64-bit mode only [as virtually identical 32-bit loop was
+# observed to outperform 64-bit one by almost 50%]. Adding two movzb to
+# cloop1 boosts its performance by 80%! This loop appears to be optimal
+# fit for Core2 and therefore the code was modified to skip cloop8 on
+# this CPU.
+
+$flavour = shift;
+$output  = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+$dat="%rdi";	    # arg1
+$len="%rsi";	    # arg2
+$inp="%rdx";	    # arg3
+$out="%rcx";	    # arg4
+
+@XX=("%r8","%r10");
+@TX=("%r9","%r11");
+$YY="%r12";
+$TY="%r13";
+
+$code=<<___;
+.text
+
+.globl	RC4
+.type	RC4,\@function,4
+.align	16
+RC4:	or	$len,$len
+	jne	.Lentry
+	ret
+.Lentry:
+	push	%rbx
+	push	%r12
+	push	%r13
+.Lprologue:
+
+	add	\$8,$dat
+	movl	-8($dat),$XX[0]#d
+	movl	-4($dat),$YY#d
+	cmpl	\$-1,256($dat)
+	je	.LRC4_CHAR
+	inc	$XX[0]#b
+	movl	($dat,$XX[0],4),$TX[0]#d
+	test	\$-8,$len
+	jz	.Lloop1
+	jmp	.Lloop8
+.align	16
+.Lloop8:
+___
+for ($i=0;$i<8;$i++) {
+$code.=<<___;
+	add	$TX[0]#b,$YY#b
+	mov	$XX[0],$XX[1]
+	movl	($dat,$YY,4),$TY#d
+	ror	\$8,%rax			# ror is redundant when $i=0
+	inc	$XX[1]#b
+	movl	($dat,$XX[1],4),$TX[1]#d
+	cmp	$XX[1],$YY
+	movl	$TX[0]#d,($dat,$YY,4)
+	cmove	$TX[0],$TX[1]
+	movl	$TY#d,($dat,$XX[0],4)
+	add	$TX[0]#b,$TY#b
+	movb	($dat,$TY,4),%al
+___
+push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
+}
+$code.=<<___;
+	ror	\$8,%rax
+	sub	\$8,$len
+
+	xor	($inp),%rax
+	add	\$8,$inp
+	mov	%rax,($out)
+	add	\$8,$out
+
+	test	\$-8,$len
+	jnz	.Lloop8
+	cmp	\$0,$len
+	jne	.Lloop1
+	jmp	.Lexit
+
+.align	16
+.Lloop1:
+	add	$TX[0]#b,$YY#b
+	movl	($dat,$YY,4),$TY#d
+	movl	$TX[0]#d,($dat,$YY,4)
+	movl	$TY#d,($dat,$XX[0],4)
+	add	$TY#b,$TX[0]#b
+	inc	$XX[0]#b
+	movl	($dat,$TX[0],4),$TY#d
+	movl	($dat,$XX[0],4),$TX[0]#d
+	xorb	($inp),$TY#b
+	inc	$inp
+	movb	$TY#b,($out)
+	inc	$out
+	dec	$len
+	jnz	.Lloop1
+	jmp	.Lexit
+
+.align	16
+.LRC4_CHAR:
+	add	\$1,$XX[0]#b
+	movzb	($dat,$XX[0]),$TX[0]#d
+	test	\$-8,$len
+	jz	.Lcloop1
+	cmpl	\$0,260($dat)
+	jnz	.Lcloop1
+	jmp	.Lcloop8
+.align	16
+.Lcloop8:
+	mov	($inp),%eax
+	mov	4($inp),%ebx
+___
+# unroll 2x4-wise, because 64-bit rotates kill Intel P4...
+for ($i=0;$i<4;$i++) {
+$code.=<<___;
+	add	$TX[0]#b,$YY#b
+	lea	1($XX[0]),$XX[1]
+	movzb	($dat,$YY),$TY#d
+	movzb	$XX[1]#b,$XX[1]#d
+	movzb	($dat,$XX[1]),$TX[1]#d
+	movb	$TX[0]#b,($dat,$YY)
+	cmp	$XX[1],$YY
+	movb	$TY#b,($dat,$XX[0])
+	jne	.Lcmov$i			# Intel cmov is sloooow...
+	mov	$TX[0],$TX[1]
+.Lcmov$i:
+	add	$TX[0]#b,$TY#b
+	xor	($dat,$TY),%al
+	ror	\$8,%eax
+___
+push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
+}
+for ($i=4;$i<8;$i++) {
+$code.=<<___;
+	add	$TX[0]#b,$YY#b
+	lea	1($XX[0]),$XX[1]
+	movzb	($dat,$YY),$TY#d
+	movzb	$XX[1]#b,$XX[1]#d
+	movzb	($dat,$XX[1]),$TX[1]#d
+	movb	$TX[0]#b,($dat,$YY)
+	cmp	$XX[1],$YY
+	movb	$TY#b,($dat,$XX[0])
+	jne	.Lcmov$i			# Intel cmov is sloooow...
+	mov	$TX[0],$TX[1]
+.Lcmov$i:
+	add	$TX[0]#b,$TY#b
+	xor	($dat,$TY),%bl
+	ror	\$8,%ebx
+___
+push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
+}
+$code.=<<___;
+	lea	-8($len),$len
+	mov	%eax,($out)
+	lea	8($inp),$inp
+	mov	%ebx,4($out)
+	lea	8($out),$out
+
+	test	\$-8,$len
+	jnz	.Lcloop8
+	cmp	\$0,$len
+	jne	.Lcloop1
+	jmp	.Lexit
+___
+$code.=<<___;
+.align	16
+.Lcloop1:
+	add	$TX[0]#b,$YY#b
+	movzb	($dat,$YY),$TY#d
+	movb	$TX[0]#b,($dat,$YY)
+	movb	$TY#b,($dat,$XX[0])
+	add	$TX[0]#b,$TY#b
+	add	\$1,$XX[0]#b
+	movzb	$TY#b,$TY#d
+	movzb	$XX[0]#b,$XX[0]#d
+	movzb	($dat,$TY),$TY#d
+	movzb	($dat,$XX[0]),$TX[0]#d
+	xorb	($inp),$TY#b
+	lea	1($inp),$inp
+	movb	$TY#b,($out)
+	lea	1($out),$out
+	sub	\$1,$len
+	jnz	.Lcloop1
+	jmp	.Lexit
+
+.align	16
+.Lexit:
+	sub	\$1,$XX[0]#b
+	movl	$XX[0]#d,-8($dat)
+	movl	$YY#d,-4($dat)
+
+	mov	(%rsp),%r13
+	mov	8(%rsp),%r12
+	mov	16(%rsp),%rbx
+	add	\$24,%rsp
+.Lepilogue:
+	ret
+.size	RC4,.-RC4
+___
+
+$idx="%r8";
+$ido="%r9";
+
+$code.=<<___;
+.extern	OPENSSL_ia32cap_P
+.globl	RC4_set_key
+.type	RC4_set_key,\@function,3
+.align	16
+RC4_set_key:
+	lea	8($dat),$dat
+	lea	($inp,$len),$inp
+	neg	$len
+	mov	$len,%rcx
+	xor	%eax,%eax
+	xor	$ido,$ido
+	xor	%r10,%r10
+	xor	%r11,%r11
+
+	mov	OPENSSL_ia32cap_P(%rip),$idx#d
+	bt	\$20,$idx#d
+	jnc	.Lw1stloop
+	bt	\$30,$idx#d
+	setc	$ido#b
+	mov	$ido#d,260($dat)
+	jmp	.Lc1stloop
+
+.align	16
+.Lw1stloop:
+	mov	%eax,($dat,%rax,4)
+	add	\$1,%al
+	jnc	.Lw1stloop
+
+	xor	$ido,$ido
+	xor	$idx,$idx
+.align	16
+.Lw2ndloop:
+	mov	($dat,$ido,4),%r10d
+	add	($inp,$len,1),$idx#b
+	add	%r10b,$idx#b
+	add	\$1,$len
+	mov	($dat,$idx,4),%r11d
+	cmovz	%rcx,$len
+	mov	%r10d,($dat,$idx,4)
+	mov	%r11d,($dat,$ido,4)
+	add	\$1,$ido#b
+	jnc	.Lw2ndloop
+	jmp	.Lexit_key
+
+.align	16
+.Lc1stloop:
+	mov	%al,($dat,%rax)
+	add	\$1,%al
+	jnc	.Lc1stloop
+
+	xor	$ido,$ido
+	xor	$idx,$idx
+.align	16
+.Lc2ndloop:
+	mov	($dat,$ido),%r10b
+	add	($inp,$len),$idx#b
+	add	%r10b,$idx#b
+	add	\$1,$len
+	mov	($dat,$idx),%r11b
+	jnz	.Lcnowrap
+	mov	%rcx,$len
+.Lcnowrap:
+	mov	%r10b,($dat,$idx)
+	mov	%r11b,($dat,$ido)
+	add	\$1,$ido#b
+	jnc	.Lc2ndloop
+	movl	\$-1,256($dat)
+
+.align	16
+.Lexit_key:
+	xor	%eax,%eax
+	mov	%eax,-8($dat)
+	mov	%eax,-4($dat)
+	ret
+.size	RC4_set_key,.-RC4_set_key
+
+.globl	RC4_options
+.type	RC4_options,\@abi-omnipotent
+.align	16
+RC4_options:
+	lea	.Lopts(%rip),%rax
+	mov	OPENSSL_ia32cap_P(%rip),%edx
+	bt	\$20,%edx
+	jnc	.Ldone
+	add	\$12,%rax
+	bt	\$30,%edx
+	jnc	.Ldone
+	add	\$13,%rax
+.Ldone:
+	ret
+.align	64
+.Lopts:
+.asciz	"rc4(8x,int)"
+.asciz	"rc4(8x,char)"
+.asciz	"rc4(1x,char)"
+.asciz	"RC4 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
+.align	64
+.size	RC4_options,.-RC4_options
+___
+
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
+if ($win64) {
+$rec="%rcx";
+$frame="%rdx";
+$context="%r8";
+$disp="%r9";
+
+$code.=<<___;
+.extern	__imp_RtlVirtualUnwind
+.type	stream_se_handler,\@abi-omnipotent
+.align	16
+stream_se_handler:
+	push	%rsi
+	push	%rdi
+	push	%rbx
+	push	%rbp
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+	pushfq
+	sub	\$64,%rsp
+
+	mov	120($context),%rax	# pull context->Rax
+	mov	248($context),%rbx	# pull context->Rip
+
+	lea	.Lprologue(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<prologue label
+	jb	.Lin_prologue
+
+	mov	152($context),%rax	# pull context->Rsp
+
+	lea	.Lepilogue(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip>=epilogue label
+	jae	.Lin_prologue
+
+	lea	24(%rax),%rax
+
+	mov	-8(%rax),%rbx
+	mov	-16(%rax),%r12
+	mov	-24(%rax),%r13
+	mov	%rbx,144($context)	# restore context->Rbx
+	mov	%r12,216($context)	# restore context->R12
+	mov	%r13,224($context)	# restore context->R13
+
+.Lin_prologue:
+	mov	8(%rax),%rdi
+	mov	16(%rax),%rsi
+	mov	%rax,152($context)	# restore context->Rsp
+	mov	%rsi,168($context)	# restore context->Rsi
+	mov	%rdi,176($context)	# restore context->Rdi
+
+	jmp	.Lcommon_seh_exit
+.size	stream_se_handler,.-stream_se_handler
+
+.type	key_se_handler,\@abi-omnipotent
+.align	16
+key_se_handler:
+	push	%rsi
+	push	%rdi
+	push	%rbx
+	push	%rbp
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+	pushfq
+	sub	\$64,%rsp
+
+	mov	152($context),%rax	# pull context->Rsp
+	mov	8(%rax),%rdi
+	mov	16(%rax),%rsi
+	mov	%rsi,168($context)	# restore context->Rsi
+	mov	%rdi,176($context)	# restore context->Rdi
+
+.Lcommon_seh_exit:
+
+	mov	40($disp),%rdi		# disp->ContextRecord
+	mov	$context,%rsi		# context
+	mov	\$154,%ecx		# sizeof(CONTEXT)
+	.long	0xa548f3fc		# cld; rep movsq
+
+	mov	$disp,%rsi
+	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
+	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
+	mov	0(%rsi),%r8		# arg3, disp->ControlPc
+	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
+	mov	40(%rsi),%r10		# disp->ContextRecord
+	lea	56(%rsi),%r11		# &disp->HandlerData
+	lea	24(%rsi),%r12		# &disp->EstablisherFrame
+	mov	%r10,32(%rsp)		# arg5
+	mov	%r11,40(%rsp)		# arg6
+	mov	%r12,48(%rsp)		# arg7
+	mov	%rcx,56(%rsp)		# arg8, (NULL)
+	call	*__imp_RtlVirtualUnwind(%rip)
+
+	mov	\$1,%eax		# ExceptionContinueSearch
+	add	\$64,%rsp
+	popfq
+	pop	%r15
+	pop	%r14
+	pop	%r13
+	pop	%r12
+	pop	%rbp
+	pop	%rbx
+	pop	%rdi
+	pop	%rsi
+	ret
+.size	key_se_handler,.-key_se_handler
+
+.section	.pdata
+.align	4
+	.rva	.LSEH_begin_RC4
+	.rva	.LSEH_end_RC4
+	.rva	.LSEH_info_RC4
+
+	.rva	.LSEH_begin_RC4_set_key
+	.rva	.LSEH_end_RC4_set_key
+	.rva	.LSEH_info_RC4_set_key
+
+.section	.xdata
+.align	8
+.LSEH_info_RC4:
+	.byte	9,0,0,0
+	.rva	stream_se_handler
+.LSEH_info_RC4_set_key:
+	.byte	9,0,0,0
+	.rva	key_se_handler
+___
+}
+
+$code =~ s/#([bwd])/$1/gm;
+
+print $code;
+
+close STDOUT;