Next step: compile jni sources correctly.

1 files changed, 0 insertions, 270 deletions

diff --git a/openssl/crypto/rc4/asm/rc4-586.pl b/openssl/crypto/rc4/asm/rc4-586.pl
deleted file mode 100644
index 38a44a70..00000000
--- a/openssl/crypto/rc4/asm/rc4-586.pl
+++ /dev/null
@@ -1,270 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# At some point it became apparent that the original SSLeay RC4
-# assembler implementation performs suboptimally on latest IA-32
-# microarchitectures. After re-tuning performance has changed as
-# following:
-#
-# Pentium	-10%
-# Pentium III	+12%
-# AMD		+50%(*)
-# P4		+250%(**)
-#
-# (*)	This number is actually a trade-off:-) It's possible to
-#	achieve	+72%, but at the cost of -48% off PIII performance.
-#	In other words code performing further 13% faster on AMD
-#	would perform almost 2 times slower on Intel PIII...
-#	For reference! This code delivers ~80% of rc4-amd64.pl
-#	performance on the same Opteron machine.
-# (**)	This number requires compressed key schedule set up by
-#	RC4_set_key [see commentary below for further details].
-#
-#					<appro@fy.chalmers.se>
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"rc4-586.pl");
-
-$xx="eax";
-$yy="ebx";
-$tx="ecx";
-$ty="edx";
-$inp="esi";
-$out="ebp";
-$dat="edi";
-
-sub RC4_loop {
-  my $i=shift;
-  my $func = ($i==0)?*mov:*or;
-
-	&add	(&LB($yy),&LB($tx));
-	&mov	($ty,&DWP(0,$dat,$yy,4));
-	&mov	(&DWP(0,$dat,$yy,4),$tx);
-	&mov	(&DWP(0,$dat,$xx,4),$ty);
-	&add	($ty,$tx);
-	&inc	(&LB($xx));
-	&and	($ty,0xff);
-	&ror	($out,8)	if ($i!=0);
-	if ($i<3) {
-	  &mov	($tx,&DWP(0,$dat,$xx,4));
-	} else {
-	  &mov	($tx,&wparam(3));	# reload [re-biased] out
-	}
-	&$func	($out,&DWP(0,$dat,$ty,4));
-}
-
-# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
-&function_begin("RC4");
-	&mov	($dat,&wparam(0));	# load key schedule pointer
-	&mov	($ty, &wparam(1));	# load len
-	&mov	($inp,&wparam(2));	# load inp
-	&mov	($out,&wparam(3));	# load out
-
-	&xor	($xx,$xx);		# avoid partial register stalls
-	&xor	($yy,$yy);
-
-	&cmp	($ty,0);		# safety net
-	&je	(&label("abort"));
-
-	&mov	(&LB($xx),&BP(0,$dat));	# load key->x
-	&mov	(&LB($yy),&BP(4,$dat));	# load key->y
-	&add	($dat,8);
-
-	&lea	($tx,&DWP(0,$inp,$ty));
-	&sub	($out,$inp);		# re-bias out
-	&mov	(&wparam(1),$tx);	# save input+len
-
-	&inc	(&LB($xx));
-
-	# detect compressed key schedule...
-	&cmp	(&DWP(256,$dat),-1);
-	&je	(&label("RC4_CHAR"));
-
-	&mov	($tx,&DWP(0,$dat,$xx,4));
-
-	&and	($ty,-4);		# how many 4-byte chunks?
-	&jz	(&label("loop1"));
-
-	&lea	($ty,&DWP(-4,$inp,$ty));
-	&mov	(&wparam(2),$ty);	# save input+(len/4)*4-4
-	&mov	(&wparam(3),$out);	# $out as accumulator in this loop
-
-	&set_label("loop4",16);
-		for ($i=0;$i<4;$i++) { RC4_loop($i); }
-		&ror	($out,8);
-		&xor	($out,&DWP(0,$inp));
-		&cmp	($inp,&wparam(2));	# compare to input+(len/4)*4-4
-		&mov	(&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here
-		&lea	($inp,&DWP(4,$inp));
-		&mov	($tx,&DWP(0,$dat,$xx,4));
-	&jb	(&label("loop4"));
-
-	&cmp	($inp,&wparam(1));	# compare to input+len
-	&je	(&label("done"));
-	&mov	($out,&wparam(3));	# restore $out
-
-	&set_label("loop1",16);
-		&add	(&LB($yy),&LB($tx));
-		&mov	($ty,&DWP(0,$dat,$yy,4));
-		&mov	(&DWP(0,$dat,$yy,4),$tx);
-		&mov	(&DWP(0,$dat,$xx,4),$ty);
-		&add	($ty,$tx);
-		&inc	(&LB($xx));
-		&and	($ty,0xff);
-		&mov	($ty,&DWP(0,$dat,$ty,4));
-		&xor	(&LB($ty),&BP(0,$inp));
-		&lea	($inp,&DWP(1,$inp));
-		&mov	($tx,&DWP(0,$dat,$xx,4));
-		&cmp	($inp,&wparam(1));	# compare to input+len
-		&mov	(&BP(-1,$out,$inp),&LB($ty));
-	&jb	(&label("loop1"));
-
-	&jmp	(&label("done"));
-
-# this is essentially Intel P4 specific codepath...
-&set_label("RC4_CHAR",16);
-	&movz	($tx,&BP(0,$dat,$xx));
-	# strangely enough unrolled loop performs over 20% slower...
-	&set_label("cloop1");
-		&add	(&LB($yy),&LB($tx));
-		&movz	($ty,&BP(0,$dat,$yy));
-		&mov	(&BP(0,$dat,$yy),&LB($tx));
-		&mov	(&BP(0,$dat,$xx),&LB($ty));
-		&add	(&LB($ty),&LB($tx));
-		&movz	($ty,&BP(0,$dat,$ty));
-		&add	(&LB($xx),1);
-		&xor	(&LB($ty),&BP(0,$inp));
-		&lea	($inp,&DWP(1,$inp));
-		&movz	($tx,&BP(0,$dat,$xx));
-		&cmp	($inp,&wparam(1));
-		&mov	(&BP(-1,$out,$inp),&LB($ty));
-	&jb	(&label("cloop1"));
-
-&set_label("done");
-	&dec	(&LB($xx));
-	&mov	(&BP(-4,$dat),&LB($yy));	# save key->y
-	&mov	(&BP(-8,$dat),&LB($xx));	# save key->x
-&set_label("abort");
-&function_end("RC4");
-
-########################################################################
-
-$inp="esi";
-$out="edi";
-$idi="ebp";
-$ido="ecx";
-$idx="edx";
-
-&external_label("OPENSSL_ia32cap_P");
-
-# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
-&function_begin("RC4_set_key");
-	&mov	($out,&wparam(0));		# load key
-	&mov	($idi,&wparam(1));		# load len
-	&mov	($inp,&wparam(2));		# load data
-	&picmeup($idx,"OPENSSL_ia32cap_P");
-
-	&lea	($out,&DWP(2*4,$out));		# &key->data
-	&lea	($inp,&DWP(0,$inp,$idi));	# $inp to point at the end
-	&neg	($idi);
-	&xor	("eax","eax");
-	&mov	(&DWP(-4,$out),$idi);		# borrow key->y
-
-	&bt	(&DWP(0,$idx),20);		# check for bit#20
-	&jc	(&label("c1stloop"));
-
-&set_label("w1stloop",16);
-	&mov	(&DWP(0,$out,"eax",4),"eax");	# key->data[i]=i;
-	&add	(&LB("eax"),1);			# i++;
-	&jnc	(&label("w1stloop"));
-
-	&xor	($ido,$ido);
-	&xor	($idx,$idx);
-
-&set_label("w2ndloop",16);
-	&mov	("eax",&DWP(0,$out,$ido,4));
-	&add	(&LB($idx),&BP(0,$inp,$idi));
-	&add	(&LB($idx),&LB("eax"));
-	&add	($idi,1);
-	&mov	("ebx",&DWP(0,$out,$idx,4));
-	&jnz	(&label("wnowrap"));
-	  &mov	($idi,&DWP(-4,$out));
-	&set_label("wnowrap");
-	&mov	(&DWP(0,$out,$idx,4),"eax");
-	&mov	(&DWP(0,$out,$ido,4),"ebx");
-	&add	(&LB($ido),1);
-	&jnc	(&label("w2ndloop"));
-&jmp	(&label("exit"));
-
-# Unlike all other x86 [and x86_64] implementations, Intel P4 core
-# [including EM64T] was found to perform poorly with above "32-bit" key
-# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded
-# assembler turned out to be 3.5x if re-coded for compressed 8-bit one,
-# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit
-# schedule for x86[_64], because non-P4 implementations suffer from
-# significant performance losses then, e.g. PIII exhibits >2x
-# deterioration, and so does Opteron. In order to assure optimal
-# all-round performance, we detect P4 at run-time and set up compressed
-# key schedule, which is recognized by RC4 procedure.
-
-&set_label("c1stloop",16);
-	&mov	(&BP(0,$out,"eax"),&LB("eax"));	# key->data[i]=i;
-	&add	(&LB("eax"),1);			# i++;
-	&jnc	(&label("c1stloop"));
-
-	&xor	($ido,$ido);
-	&xor	($idx,$idx);
-	&xor	("ebx","ebx");
-
-&set_label("c2ndloop",16);
-	&mov	(&LB("eax"),&BP(0,$out,$ido));
-	&add	(&LB($idx),&BP(0,$inp,$idi));
-	&add	(&LB($idx),&LB("eax"));
-	&add	($idi,1);
-	&mov	(&LB("ebx"),&BP(0,$out,$idx));
-	&jnz	(&label("cnowrap"));
-	  &mov	($idi,&DWP(-4,$out));
-	&set_label("cnowrap");
-	&mov	(&BP(0,$out,$idx),&LB("eax"));
-	&mov	(&BP(0,$out,$ido),&LB("ebx"));
-	&add	(&LB($ido),1);
-	&jnc	(&label("c2ndloop"));
-
-	&mov	(&DWP(256,$out),-1);		# mark schedule as compressed
-
-&set_label("exit");
-	&xor	("eax","eax");
-	&mov	(&DWP(-8,$out),"eax");		# key->x=0;
-	&mov	(&DWP(-4,$out),"eax");		# key->y=0;
-&function_end("RC4_set_key");
-
-# const char *RC4_options(void);
-&function_begin_B("RC4_options");
-	&call	(&label("pic_point"));
-&set_label("pic_point");
-	&blindpop("eax");
-	&lea	("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
-	&picmeup("edx","OPENSSL_ia32cap_P");
-	&bt	(&DWP(0,"edx"),20);
-	&jnc	(&label("skip"));
-	  &add	("eax",12);
-	&set_label("skip");
-	&ret	();
-&set_label("opts",64);
-&asciz	("rc4(4x,int)");
-&asciz	("rc4(1x,char)");
-&asciz	("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
-&align	(64);
-&function_end_B("RC4_options");
-
-&asm_finish();
-