Next step: compile jni sources correctly.

1 files changed, 0 insertions, 285 deletions

diff --git a/lzo/doc/LZOAPI.TXT b/lzo/doc/LZOAPI.TXT
deleted file mode 100644
index 5ae73532..00000000
--- a/lzo/doc/LZOAPI.TXT
+++ /dev/null
@@ -1,285 +0,0 @@
-
-============================================================================
-LZO -- a real-time data compression library                LIBRARY REFERENCE
-============================================================================
-
-
-[ please read LZO.FAQ first ]
-
-
-Table of Contents
-=================
-
-1      Introduction to the LZO Library Reference
-1.1      Preliminary notes
-1.2      Headers
-2      General
-2.1      The memory model
-2.2      Public integral types
-2.3      Public pointer types
-2.4      Public function types
-3      Function reference
-3.1      Initialization
-3.2      Compression
-3.3      Decompression
-3.4      Optimization
-3.5      String functions
-3.6      Checksum functions
-3.7      Version functions
-4      Variable reference
-
-
-
-1 Introduction to the LZO Library Reference
-=============================================
-
-
-1.1 Preliminary notes
----------------------
-
-- 'C90' is short for ISO 9899-1990, the ANSI/ISO standard for the C
-  programming language
-
-
-1.2 Headers
------------
-
-This section briefly describes the headers.
-
-<lzo/lzoconf.h>
-
-    Contains definitions for the basic integral and pointer types,
-    provides wrappers for the library calling conventions, defines
-    error codes and contains prototypes for the generic functions.
-    This file is automatically included by all LZO headers.
-
-<lzo/lzo1.h>
-<lzo/lzo1a.h>
-<lzo/lzo1b.h>
-<lzo/lzo1c.h>
-<lzo/lzo1f.h>
-<lzo/lzo1x.h>
-<lzo/lzo1y.h>
-<lzo/lzo1z.h>
-<lzo/lzo2a.h>
-
-    These files provide definitions and prototypes for the
-    actual (de-)compression functions.
-
-
-
-2 General
-=========
-
-
-2.1 The memory model
---------------------
-
-The documentation indicates that LZO requires 32-bit integers. It's
-not the integer size that really matters, though, but the memory
-model. If your memory model allows to access pointers at 32-bit
-offsets, then there is no problem at all - LZO works fine on my
-old Atari ST, which has 16 bit integers and a flat 32-bit memory model.
-Using 'huge' 32-bit pointers under 16-bit DOS is a workaround for this.
-
-While LZO also works with a strict 16-bit memory model, I don't officially
-support this because this limits the maximum block size to 64 KiB - and this
-makes the library incompatible with other platforms, i.e. you cannot
-decompress larger blocks compressed on those platforms.
-
-
-2.2 Public integral types
--------------------------
-
-lzo_uint
-
-    used as size_t, must be 32 bits or more for compatibility reasons
-
-lzo_uint32
-
-    *must* be 32 bits or more
-
-lzo_bool
-
-    can store the values 0 ("false") and 1 ("true")
-
-lzo_byte
-
-    unsigned char (memory model specific)
-
-
-2.3 Public pointer types
-------------------------
-
-All pointer types are memory model specific.
-
-lzo_voidp
-
-    pointer to void
-
-lzo_bytep
-
-    pointer to unsigned char
-
-lzo_bytepp
-
-    array of pointers to unsigned char
-
-
-2.4 Public function types
--------------------------
-
-lzo_compress_t
-
-lzo_decompress_t
-
-lzo_optimize_t
-
-lzo_callback_t
-
-
-
-3 Function reference
-====================
-
-
-3.1 Initialization
-------------------
-
-int lzo_init ( void );
-
-  This function initializes the LZO library. It must be the first LZO
-  function you call, and you cannot use any of the other LZO library
-  functions if the call fails.
-
-  Return value:
-    Returns LZO_E_OK on success, error code otherwise.
-
-  Note:
-    This function is actually implemented using a macro.
-
-
-3.2 Compression
----------------
-
-All compressors compress the memory block at 'src' with the uncompressed
-length 'src_len' to the address given by 'dst'.
-The length of the compressed blocked will be returned in the variable
-pointed by 'dst_len'.
-
-The two blocks may overlap under certain conditions (see examples/overlap.c),
-thereby allowing "in-place" compression.
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#include <lzo/lzo1x.h>
-
-int lzo1x_1_compress ( const lzo_bytep src, lzo_uint  src_len,
-                             lzo_bytep dst, lzo_uintp dst_len,
-                             lzo_voidp wrkmem );
-
-  Algorithm:            LZO1X
-  Compression level:    LZO1X-1
-  Memory requirements:  LZO1X_1_MEM_COMPRESS    (64 KiB on 32-bit machines)
-
-  This compressor is pretty fast.
-
-  Return value:
-    Always returns LZO_E_OK (this function can never fail).
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#include <lzo/lzo1x.h>
-
-int lzo1x_999_compress ( const lzo_bytep src, lzo_uint  src_len,
-                               lzo_bytep dst, lzo_uintp dst_len,
-                               lzo_voidp wrkmem );
-
-  Algorithm:            LZO1X
-  Compression level:    LZO1X-999
-  Memory requirements:  LZO1X_999_MEM_COMPRESS  (448 KiB on 32-bit machines)
-
-  This compressor is quite slow but achieves a good compression
-  ratio. It is mainly intended for generating pre-compressed data.
-
-  Return value:
-    Always returns LZO_E_OK (this function can never fail).
-
-
-[ ... lots of other compressors which all follow the same principle ... ]
-
-
-
-3.3 Decompression
------------------
-
-All decompressors decompress the memory block at 'src' with the compressed
-length 'src_len' to the address given by 'dst'.
-The length of the decompressed block will be returned in the variable
-pointed by 'dst_len' - on error the number of bytes that have
-been decompressed so far will be returned.
-
-The safe decompressors expect that the number of bytes available in
-the 'dst' block is passed via the variable pointed by 'dst_len'.
-
-The two blocks may overlap under certain conditions (see examples/overlap.c),
-thereby allowing "in-place" decompression.
-
-
-Description of return values:
-
-  LZO_E_OK
-    Success.
-
-  LZO_E_INPUT_NOT_CONSUMED
-    The end of the compressed block has been detected before all
-    bytes in the compressed block have been used.
-    This may actually not be an error (if 'src_len' is too large).
-
-  LZO_E_INPUT_OVERRUN
-    The decompressor requested more bytes from the compressed
-    block than available.
-    Your data is corrupted (or 'src_len' is too small).
-
-  LZO_E_OUTPUT_OVERRUN
-    The decompressor requested to write more bytes to the uncompressed
-    block than available.
-    Either your data is corrupted, or you should increase the number of
-    available bytes passed in the variable pointed by 'dst_len'.
-
-  LZO_E_LOOKBEHIND_OVERRUN
-    Your data is corrupted.
-
-  LZO_E_EOF_NOT_FOUND
-    No EOF code was found in the compressed block.
-    Your data is corrupted (or 'src_len' is too small).
-
-  LZO_E_ERROR
-    Any other error (data corrupted).
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#include <lzo1x.h>
-
-int lzo1x_decompress ( const lzo_bytep src, lzo_uint  src_len,
-                             lzo_bytep dst, lzo_uintp dst_len,
-                             lzo_voidp wrkmem );
-
-  Algorithm:            LZO1X
-  Memory requirements:  0
-
-
-[ ... lots of other decompressors which all follow the same principle ... ]
-
-
-
-4 Variable reference
-====================
-
-The variables are listed alphabetically.
-
-[ no public variables yet ]
-
-
-
---------------------------- END OF LZOAPI.TXT ------------------------------
-