Compiles correctly: app/build-native + gradle.

72 files changed, 37961 insertions, 0 deletions

diff --git a/app/openssl/crypto/bn/asm/README b/app/openssl/crypto/bn/asm/README
new file mode 100644
index 00000000..b0f3a68a
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/README
@@ -0,0 +1,27 @@
+<OBSOLETE>
+
+All assember in this directory are just version of the file
+crypto/bn/bn_asm.c.
+
+Quite a few of these files are just the assember output from gcc since on 
+quite a few machines they are 2 times faster than the system compiler.
+
+For the x86, I have hand written assember because of the bad job all
+compilers seem to do on it.  This normally gives a 2 time speed up in the RSA
+routines.
+
+For the DEC alpha, I also hand wrote the assember (except the division which
+is just the output from the C compiler pasted on the end of the file).
+On the 2 alpha C compilers I had access to, it was not possible to do
+64b x 64b -> 128b calculations (both long and the long long data types
+were 64 bits).  So the hand assember gives access to the 128 bit result and
+a 2 times speedup :-).
+
+There are 3 versions of assember for the HP PA-RISC.
+
+pa-risc.s is the origional one which works fine and generated using gcc :-)
+
+pa-risc2W.s and pa-risc2.s are 64 and 32-bit PA-RISC 2.0 implementations
+by Chris Ruemmler from HP (with some help from the HP C compiler).
+
+</OBSOLETE>
diff --git a/app/openssl/crypto/bn/asm/alpha-mont.pl b/app/openssl/crypto/bn/asm/alpha-mont.pl
new file mode 100644
index 00000000..03596e20
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/alpha-mont.pl
@@ -0,0 +1,321 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# On 21264 RSA sign performance improves by 70/35/20/15 percent for
+# 512/1024/2048/4096 bit key lengths. This is against vendor compiler
+# instructed to '-tune host' code with in-line assembler. Other
+# benchmarks improve by 15-20%. To anchor it to something else, the
+# code provides approximately the same performance per GHz as AMD64.
+# I.e. if you compare 1GHz 21264 and 2GHz Opteron, you'll observe ~2x
+# difference.
+
+# int bn_mul_mont(
+$rp="a0";	# BN_ULONG *rp,
+$ap="a1";	# const BN_ULONG *ap,
+$bp="a2";	# const BN_ULONG *bp,
+$np="a3";	# const BN_ULONG *np,
+$n0="a4";	# const BN_ULONG *n0,
+$num="a5";	# int num);
+
+$lo0="t0";
+$hi0="t1";
+$lo1="t2";
+$hi1="t3";
+$aj="t4";
+$bi="t5";
+$nj="t6";
+$tp="t7";
+$alo="t8";
+$ahi="t9";
+$nlo="t10";
+$nhi="t11";
+$tj="t12";
+$i="s3";
+$j="s4";
+$m1="s5";
+
+$code=<<___;
+#ifdef __linux__
+#include <asm/regdef.h>
+#else
+#include <asm.h>
+#include <regdef.h>
+#endif
+
+.text
+
+.set	noat
+.set	noreorder
+
+.globl	bn_mul_mont
+.align	5
+.ent	bn_mul_mont
+bn_mul_mont:
+	lda	sp,-48(sp)
+	stq	ra,0(sp)
+	stq	s3,8(sp)
+	stq	s4,16(sp)
+	stq	s5,24(sp)
+	stq	fp,32(sp)
+	mov	sp,fp
+	.mask	0x0400f000,-48
+	.frame	fp,48,ra
+	.prologue 0
+
+	.align	4
+	.set	reorder
+	sextl	$num,$num
+	mov	0,v0
+	cmplt	$num,4,AT
+	bne	AT,.Lexit
+
+	ldq	$hi0,0($ap)	# ap[0]
+	s8addq	$num,16,AT
+	ldq	$aj,8($ap)
+	subq	sp,AT,sp
+	ldq	$bi,0($bp)	# bp[0]
+	lda	AT,-4096(zero)	# mov	-4096,AT
+	ldq	$n0,0($n0)
+	and	sp,AT,sp
+
+	mulq	$hi0,$bi,$lo0
+	ldq	$hi1,0($np)	# np[0]
+	umulh	$hi0,$bi,$hi0
+	ldq	$nj,8($np)
+
+	mulq	$lo0,$n0,$m1
+
+	mulq	$hi1,$m1,$lo1
+	umulh	$hi1,$m1,$hi1
+
+	addq	$lo1,$lo0,$lo1
+	cmpult	$lo1,$lo0,AT
+	addq	$hi1,AT,$hi1
+
+	mulq	$aj,$bi,$alo
+	mov	2,$j
+	umulh	$aj,$bi,$ahi
+	mov	sp,$tp
+
+	mulq	$nj,$m1,$nlo
+	s8addq	$j,$ap,$aj
+	umulh	$nj,$m1,$nhi
+	s8addq	$j,$np,$nj
+.align	4
+.L1st:
+	.set	noreorder
+	ldq	$aj,0($aj)
+	addl	$j,1,$j
+	ldq	$nj,0($nj)
+	lda	$tp,8($tp)
+
+	addq	$alo,$hi0,$lo0
+	mulq	$aj,$bi,$alo
+	cmpult	$lo0,$hi0,AT
+	addq	$nlo,$hi1,$lo1
+
+	mulq	$nj,$m1,$nlo
+	addq	$ahi,AT,$hi0
+	cmpult	$lo1,$hi1,v0
+	cmplt	$j,$num,$tj
+
+	umulh	$aj,$bi,$ahi
+	addq	$nhi,v0,$hi1
+	addq	$lo1,$lo0,$lo1
+	s8addq	$j,$ap,$aj
+
+	umulh	$nj,$m1,$nhi
+	cmpult	$lo1,$lo0,v0
+	addq	$hi1,v0,$hi1
+	s8addq	$j,$np,$nj
+
+	stq	$lo1,-8($tp)
+	nop
+	unop
+	bne	$tj,.L1st
+	.set	reorder
+
+	addq	$alo,$hi0,$lo0
+	addq	$nlo,$hi1,$lo1
+	cmpult	$lo0,$hi0,AT
+	cmpult	$lo1,$hi1,v0
+	addq	$ahi,AT,$hi0
+	addq	$nhi,v0,$hi1
+
+	addq	$lo1,$lo0,$lo1
+	cmpult	$lo1,$lo0,v0
+	addq	$hi1,v0,$hi1
+
+	stq	$lo1,0($tp)
+
+	addq	$hi1,$hi0,$hi1
+	cmpult	$hi1,$hi0,AT
+	stq	$hi1,8($tp)
+	stq	AT,16($tp)
+
+	mov	1,$i
+.align	4
+.Louter:
+	s8addq	$i,$bp,$bi
+	ldq	$hi0,0($ap)
+	ldq	$aj,8($ap)
+	ldq	$bi,0($bi)
+	ldq	$hi1,0($np)
+	ldq	$nj,8($np)
+	ldq	$tj,0(sp)
+
+	mulq	$hi0,$bi,$lo0
+	umulh	$hi0,$bi,$hi0
+
+	addq	$lo0,$tj,$lo0
+	cmpult	$lo0,$tj,AT
+	addq	$hi0,AT,$hi0
+
+	mulq	$lo0,$n0,$m1
+
+	mulq	$hi1,$m1,$lo1
+	umulh	$hi1,$m1,$hi1
+
+	addq	$lo1,$lo0,$lo1
+	cmpult	$lo1,$lo0,AT
+	mov	2,$j
+	addq	$hi1,AT,$hi1
+
+	mulq	$aj,$bi,$alo
+	mov	sp,$tp
+	umulh	$aj,$bi,$ahi
+
+	mulq	$nj,$m1,$nlo
+	s8addq	$j,$ap,$aj
+	umulh	$nj,$m1,$nhi
+.align	4
+.Linner:
+	.set	noreorder
+	ldq	$tj,8($tp)	#L0
+	nop			#U1
+	ldq	$aj,0($aj)	#L1
+	s8addq	$j,$np,$nj	#U0
+
+	ldq	$nj,0($nj)	#L0
+	nop			#U1
+	addq	$alo,$hi0,$lo0	#L1
+	lda	$tp,8($tp)
+
+	mulq	$aj,$bi,$alo	#U1
+	cmpult	$lo0,$hi0,AT	#L0
+	addq	$nlo,$hi1,$lo1	#L1
+	addl	$j,1,$j
+
+	mulq	$nj,$m1,$nlo	#U1
+	addq	$ahi,AT,$hi0	#L0
+	addq	$lo0,$tj,$lo0	#L1
+	cmpult	$lo1,$hi1,v0	#U0
+
+	umulh	$aj,$bi,$ahi	#U1
+	cmpult	$lo0,$tj,AT	#L0
+	addq	$lo1,$lo0,$lo1	#L1
+	addq	$nhi,v0,$hi1	#U0
+
+	umulh	$nj,$m1,$nhi	#U1
+	s8addq	$j,$ap,$aj	#L0
+	cmpult	$lo1,$lo0,v0	#L1
+	cmplt	$j,$num,$tj	#U0	# borrow $tj
+
+	addq	$hi0,AT,$hi0	#L0
+	addq	$hi1,v0,$hi1	#U1
+	stq	$lo1,-8($tp)	#L1
+	bne	$tj,.Linner	#U0
+	.set	reorder
+
+	ldq	$tj,8($tp)
+	addq	$alo,$hi0,$lo0
+	addq	$nlo,$hi1,$lo1
+	cmpult	$lo0,$hi0,AT
+	cmpult	$lo1,$hi1,v0
+	addq	$ahi,AT,$hi0
+	addq	$nhi,v0,$hi1
+
+	addq	$lo0,$tj,$lo0
+	cmpult	$lo0,$tj,AT
+	addq	$hi0,AT,$hi0
+
+	ldq	$tj,16($tp)
+	addq	$lo1,$lo0,$j
+	cmpult	$j,$lo0,v0
+	addq	$hi1,v0,$hi1
+
+	addq	$hi1,$hi0,$lo1
+	stq	$j,0($tp)
+	cmpult	$lo1,$hi0,$hi1
+	addq	$lo1,$tj,$lo1
+	cmpult	$lo1,$tj,AT
+	addl	$i,1,$i
+	addq	$hi1,AT,$hi1
+	stq	$lo1,8($tp)
+	cmplt	$i,$num,$tj	# borrow $tj
+	stq	$hi1,16($tp)
+	bne	$tj,.Louter
+
+	s8addq	$num,sp,$tj	# &tp[num]
+	mov	$rp,$bp		# put rp aside
+	mov	sp,$tp
+	mov	sp,$ap
+	mov	0,$hi0		# clear borrow bit
+
+.align	4
+.Lsub:	ldq	$lo0,0($tp)
+	ldq	$lo1,0($np)
+	lda	$tp,8($tp)
+	lda	$np,8($np)
+	subq	$lo0,$lo1,$lo1	# tp[i]-np[i]
+	cmpult	$lo0,$lo1,AT
+	subq	$lo1,$hi0,$lo0
+	cmpult	$lo1,$lo0,$hi0
+	or	$hi0,AT,$hi0
+	stq	$lo0,0($rp)
+	cmpult	$tp,$tj,v0
+	lda	$rp,8($rp)
+	bne	v0,.Lsub
+
+	subq	$hi1,$hi0,$hi0	# handle upmost overflow bit
+	mov	sp,$tp
+	mov	$bp,$rp		# restore rp
+
+	and	sp,$hi0,$ap
+	bic	$bp,$hi0,$bp
+	bis	$bp,$ap,$ap	# ap=borrow?tp:rp
+
+.align	4
+.Lcopy:	ldq	$aj,0($ap)	# copy or in-place refresh
+	lda	$tp,8($tp)
+	lda	$rp,8($rp)
+	lda	$ap,8($ap)
+	stq	zero,-8($tp)	# zap tp
+	cmpult	$tp,$tj,AT
+	stq	$aj,-8($rp)
+	bne	AT,.Lcopy
+	mov	1,v0
+
+.Lexit:
+	.set	noreorder
+	mov	fp,sp
+	/*ldq	ra,0(sp)*/
+	ldq	s3,8(sp)
+	ldq	s4,16(sp)
+	ldq	s5,24(sp)
+	ldq	fp,32(sp)
+	lda	sp,48(sp)
+	ret	(ra)
+.end	bn_mul_mont
+.ascii	"Montgomery Multiplication for Alpha, CRYPTOGAMS by <appro\@openssl.org>"
+.align	2
+___
+
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/armv4-mont.pl b/app/openssl/crypto/bn/asm/armv4-mont.pl
new file mode 100644
index 00000000..14e0d2d1
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/armv4-mont.pl
@@ -0,0 +1,201 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# January 2007.
+
+# Montgomery multiplication for ARMv4.
+#
+# Performance improvement naturally varies among CPU implementations
+# and compilers. The code was observed to provide +65-35% improvement
+# [depending on key length, less for longer keys] on ARM920T, and
+# +115-80% on Intel IXP425. This is compared to pre-bn_mul_mont code
+# base and compiler generated code with in-lined umull and even umlal
+# instructions. The latter means that this code didn't really have an 
+# "advantage" of utilizing some "secret" instruction.
+#
+# The code is interoperable with Thumb ISA and is rather compact, less
+# than 1/2KB. Windows CE port would be trivial, as it's exclusively
+# about decorations, ABI and instruction syntax are identical.
+
+$num="r0";	# starts as num argument, but holds &tp[num-1]
+$ap="r1";
+$bp="r2"; $bi="r2"; $rp="r2";
+$np="r3";
+$tp="r4";
+$aj="r5";
+$nj="r6";
+$tj="r7";
+$n0="r8";
+###########	# r9 is reserved by ELF as platform specific, e.g. TLS pointer
+$alo="r10";	# sl, gcc uses it to keep @GOT
+$ahi="r11";	# fp
+$nlo="r12";	# ip
+###########	# r13 is stack pointer
+$nhi="r14";	# lr
+###########	# r15 is program counter
+
+#### argument block layout relative to &tp[num-1], a.k.a. $num
+$_rp="$num,#12*4";
+# ap permanently resides in r1
+$_bp="$num,#13*4";
+# np permanently resides in r3
+$_n0="$num,#14*4";
+$_num="$num,#15*4";	$_bpend=$_num;
+
+$code=<<___;
+.text
+
+.global	bn_mul_mont
+.type	bn_mul_mont,%function
+
+.align	2
+bn_mul_mont:
+	stmdb	sp!,{r0,r2}		@ sp points at argument block
+	ldr	$num,[sp,#3*4]		@ load num
+	cmp	$num,#2
+	movlt	r0,#0
+	addlt	sp,sp,#2*4
+	blt	.Labrt
+
+	stmdb	sp!,{r4-r12,lr}		@ save 10 registers
+
+	mov	$num,$num,lsl#2		@ rescale $num for byte count
+	sub	sp,sp,$num		@ alloca(4*num)
+	sub	sp,sp,#4		@ +extra dword
+	sub	$num,$num,#4		@ "num=num-1"
+	add	$tp,$bp,$num		@ &bp[num-1]
+
+	add	$num,sp,$num		@ $num to point at &tp[num-1]
+	ldr	$n0,[$_n0]		@ &n0
+	ldr	$bi,[$bp]		@ bp[0]
+	ldr	$aj,[$ap],#4		@ ap[0],ap++
+	ldr	$nj,[$np],#4		@ np[0],np++
+	ldr	$n0,[$n0]		@ *n0
+	str	$tp,[$_bpend]		@ save &bp[num]
+
+	umull	$alo,$ahi,$aj,$bi	@ ap[0]*bp[0]
+	str	$n0,[$_n0]		@ save n0 value
+	mul	$n0,$alo,$n0		@ "tp[0]"*n0
+	mov	$nlo,#0
+	umlal	$alo,$nlo,$nj,$n0	@ np[0]*n0+"t[0]"
+	mov	$tp,sp
+
+.L1st:
+	ldr	$aj,[$ap],#4		@ ap[j],ap++
+	mov	$alo,$ahi
+	mov	$ahi,#0
+	umlal	$alo,$ahi,$aj,$bi	@ ap[j]*bp[0]
+	ldr	$nj,[$np],#4		@ np[j],np++
+	mov	$nhi,#0
+	umlal	$nlo,$nhi,$nj,$n0	@ np[j]*n0
+	adds	$nlo,$nlo,$alo
+	str	$nlo,[$tp],#4		@ tp[j-1]=,tp++
+	adc	$nlo,$nhi,#0
+	cmp	$tp,$num
+	bne	.L1st
+
+	adds	$nlo,$nlo,$ahi
+	mov	$nhi,#0
+	adc	$nhi,$nhi,#0
+	ldr	$tp,[$_bp]		@ restore bp
+	str	$nlo,[$num]		@ tp[num-1]=
+	ldr	$n0,[$_n0]		@ restore n0
+	str	$nhi,[$num,#4]		@ tp[num]=
+
+.Louter:
+	sub	$tj,$num,sp		@ "original" $num-1 value
+	sub	$ap,$ap,$tj		@ "rewind" ap to &ap[1]
+	sub	$np,$np,$tj		@ "rewind" np to &np[1]
+	ldr	$bi,[$tp,#4]!		@ *(++bp)
+	ldr	$aj,[$ap,#-4]		@ ap[0]
+	ldr	$nj,[$np,#-4]		@ np[0]
+	ldr	$alo,[sp]		@ tp[0]
+	ldr	$tj,[sp,#4]		@ tp[1]
+
+	mov	$ahi,#0
+	umlal	$alo,$ahi,$aj,$bi	@ ap[0]*bp[i]+tp[0]
+	str	$tp,[$_bp]		@ save bp
+	mul	$n0,$alo,$n0
+	mov	$nlo,#0
+	umlal	$alo,$nlo,$nj,$n0	@ np[0]*n0+"tp[0]"
+	mov	$tp,sp
+
+.Linner:
+	ldr	$aj,[$ap],#4		@ ap[j],ap++
+	adds	$alo,$ahi,$tj		@ +=tp[j]
+	mov	$ahi,#0
+	umlal	$alo,$ahi,$aj,$bi	@ ap[j]*bp[i]
+	ldr	$nj,[$np],#4		@ np[j],np++
+	mov	$nhi,#0
+	umlal	$nlo,$nhi,$nj,$n0	@ np[j]*n0
+	ldr	$tj,[$tp,#8]		@ tp[j+1]
+	adc	$ahi,$ahi,#0
+	adds	$nlo,$nlo,$alo
+	str	$nlo,[$tp],#4		@ tp[j-1]=,tp++
+	adc	$nlo,$nhi,#0
+	cmp	$tp,$num
+	bne	.Linner
+
+	adds	$nlo,$nlo,$ahi
+	mov	$nhi,#0
+	adc	$nhi,$nhi,#0
+	adds	$nlo,$nlo,$tj
+	adc	$nhi,$nhi,#0
+	ldr	$tp,[$_bp]		@ restore bp
+	ldr	$tj,[$_bpend]		@ restore &bp[num]
+	str	$nlo,[$num]		@ tp[num-1]=
+	ldr	$n0,[$_n0]		@ restore n0
+	str	$nhi,[$num,#4]		@ tp[num]=
+
+	cmp	$tp,$tj
+	bne	.Louter
+
+	ldr	$rp,[$_rp]		@ pull rp
+	add	$num,$num,#4		@ $num to point at &tp[num]
+	sub	$aj,$num,sp		@ "original" num value
+	mov	$tp,sp			@ "rewind" $tp
+	mov	$ap,$tp			@ "borrow" $ap
+	sub	$np,$np,$aj		@ "rewind" $np to &np[0]
+
+	subs	$tj,$tj,$tj		@ "clear" carry flag
+.Lsub:	ldr	$tj,[$tp],#4
+	ldr	$nj,[$np],#4
+	sbcs	$tj,$tj,$nj		@ tp[j]-np[j]
+	str	$tj,[$rp],#4		@ rp[j]=
+	teq	$tp,$num		@ preserve carry
+	bne	.Lsub
+	sbcs	$nhi,$nhi,#0		@ upmost carry
+	mov	$tp,sp			@ "rewind" $tp
+	sub	$rp,$rp,$aj		@ "rewind" $rp
+
+	and	$ap,$tp,$nhi
+	bic	$np,$rp,$nhi
+	orr	$ap,$ap,$np		@ ap=borrow?tp:rp
+
+.Lcopy:	ldr	$tj,[$ap],#4		@ copy or in-place refresh
+	str	sp,[$tp],#4		@ zap tp
+	str	$tj,[$rp],#4
+	cmp	$tp,$num
+	bne	.Lcopy
+
+	add	sp,$num,#4		@ skip over tp[num+1]
+	ldmia	sp!,{r4-r12,lr}		@ restore registers
+	add	sp,sp,#2*4		@ skip over {r0,r2}
+	mov	r0,#1
+.Labrt:	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	bx	lr			@ interoperable with Thumb ISA:-)
+.size	bn_mul_mont,.-bn_mul_mont
+.asciz	"Montgomery multiplication for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
+.align	2
+___
+
+$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm;	# make it possible to compile with -march=armv4
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/armv4-mont.s b/app/openssl/crypto/bn/asm/armv4-mont.s
new file mode 100644
index 00000000..0488455f
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/armv4-mont.s
@@ -0,0 +1,145 @@
+.text
+
+.global	bn_mul_mont
+.type	bn_mul_mont,%function
+
+.align	2
+bn_mul_mont:
+	stmdb	sp!,{r0,r2}		@ sp points at argument block
+	ldr	r0,[sp,#3*4]		@ load num
+	cmp	r0,#2
+	movlt	r0,#0
+	addlt	sp,sp,#2*4
+	blt	.Labrt
+
+	stmdb	sp!,{r4-r12,lr}		@ save 10 registers
+
+	mov	r0,r0,lsl#2		@ rescale r0 for byte count
+	sub	sp,sp,r0		@ alloca(4*num)
+	sub	sp,sp,#4		@ +extra dword
+	sub	r0,r0,#4		@ "num=num-1"
+	add	r4,r2,r0		@ &bp[num-1]
+
+	add	r0,sp,r0		@ r0 to point at &tp[num-1]
+	ldr	r8,[r0,#14*4]		@ &n0
+	ldr	r2,[r2]		@ bp[0]
+	ldr	r5,[r1],#4		@ ap[0],ap++
+	ldr	r6,[r3],#4		@ np[0],np++
+	ldr	r8,[r8]		@ *n0
+	str	r4,[r0,#15*4]		@ save &bp[num]
+
+	umull	r10,r11,r5,r2	@ ap[0]*bp[0]
+	str	r8,[r0,#14*4]		@ save n0 value
+	mul	r8,r10,r8		@ "tp[0]"*n0
+	mov	r12,#0
+	umlal	r10,r12,r6,r8	@ np[0]*n0+"t[0]"
+	mov	r4,sp
+
+.L1st:
+	ldr	r5,[r1],#4		@ ap[j],ap++
+	mov	r10,r11
+	mov	r11,#0
+	umlal	r10,r11,r5,r2	@ ap[j]*bp[0]
+	ldr	r6,[r3],#4		@ np[j],np++
+	mov	r14,#0
+	umlal	r12,r14,r6,r8	@ np[j]*n0
+	adds	r12,r12,r10
+	str	r12,[r4],#4		@ tp[j-1]=,tp++
+	adc	r12,r14,#0
+	cmp	r4,r0
+	bne	.L1st
+
+	adds	r12,r12,r11
+	mov	r14,#0
+	adc	r14,r14,#0
+	ldr	r4,[r0,#13*4]		@ restore bp
+	str	r12,[r0]		@ tp[num-1]=
+	ldr	r8,[r0,#14*4]		@ restore n0
+	str	r14,[r0,#4]		@ tp[num]=
+
+.Louter:
+	sub	r7,r0,sp		@ "original" r0-1 value
+	sub	r1,r1,r7		@ "rewind" ap to &ap[1]
+	sub	r3,r3,r7		@ "rewind" np to &np[1]
+	ldr	r2,[r4,#4]!		@ *(++bp)
+	ldr	r5,[r1,#-4]		@ ap[0]
+	ldr	r6,[r3,#-4]		@ np[0]
+	ldr	r10,[sp]		@ tp[0]
+	ldr	r7,[sp,#4]		@ tp[1]
+
+	mov	r11,#0
+	umlal	r10,r11,r5,r2	@ ap[0]*bp[i]+tp[0]
+	str	r4,[r0,#13*4]		@ save bp
+	mul	r8,r10,r8
+	mov	r12,#0
+	umlal	r10,r12,r6,r8	@ np[0]*n0+"tp[0]"
+	mov	r4,sp
+
+.Linner:
+	ldr	r5,[r1],#4		@ ap[j],ap++
+	adds	r10,r11,r7		@ +=tp[j]
+	mov	r11,#0
+	umlal	r10,r11,r5,r2	@ ap[j]*bp[i]
+	ldr	r6,[r3],#4		@ np[j],np++
+	mov	r14,#0
+	umlal	r12,r14,r6,r8	@ np[j]*n0
+	ldr	r7,[r4,#8]		@ tp[j+1]
+	adc	r11,r11,#0
+	adds	r12,r12,r10
+	str	r12,[r4],#4		@ tp[j-1]=,tp++
+	adc	r12,r14,#0
+	cmp	r4,r0
+	bne	.Linner
+
+	adds	r12,r12,r11
+	mov	r14,#0
+	adc	r14,r14,#0
+	adds	r12,r12,r7
+	adc	r14,r14,#0
+	ldr	r4,[r0,#13*4]		@ restore bp
+	ldr	r7,[r0,#15*4]		@ restore &bp[num]
+	str	r12,[r0]		@ tp[num-1]=
+	ldr	r8,[r0,#14*4]		@ restore n0
+	str	r14,[r0,#4]		@ tp[num]=
+
+	cmp	r4,r7
+	bne	.Louter
+
+	ldr	r2,[r0,#12*4]		@ pull rp
+	add	r0,r0,#4		@ r0 to point at &tp[num]
+	sub	r5,r0,sp		@ "original" num value
+	mov	r4,sp			@ "rewind" r4
+	mov	r1,r4			@ "borrow" r1
+	sub	r3,r3,r5		@ "rewind" r3 to &np[0]
+
+	subs	r7,r7,r7		@ "clear" carry flag
+.Lsub:	ldr	r7,[r4],#4
+	ldr	r6,[r3],#4
+	sbcs	r7,r7,r6		@ tp[j]-np[j]
+	str	r7,[r2],#4		@ rp[j]=
+	teq	r4,r0		@ preserve carry
+	bne	.Lsub
+	sbcs	r14,r14,#0		@ upmost carry
+	mov	r4,sp			@ "rewind" r4
+	sub	r2,r2,r5		@ "rewind" r2
+
+	and	r1,r4,r14
+	bic	r3,r2,r14
+	orr	r1,r1,r3		@ ap=borrow?tp:rp
+
+.Lcopy:	ldr	r7,[r1],#4		@ copy or in-place refresh
+	str	sp,[r4],#4		@ zap tp
+	str	r7,[r2],#4
+	cmp	r4,r0
+	bne	.Lcopy
+
+	add	sp,r0,#4		@ skip over tp[num+1]
+	ldmia	sp!,{r4-r12,lr}		@ restore registers
+	add	sp,sp,#2*4		@ skip over {r0,r2}
+	mov	r0,#1
+.Labrt:	tst	lr,#1
+	moveq	pc,lr			@ be binary compatible with V4, yet
+	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
+.size	bn_mul_mont,.-bn_mul_mont
+.asciz	"Montgomery multiplication for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
+.align	2
diff --git a/app/openssl/crypto/bn/asm/bn-586.pl b/app/openssl/crypto/bn/asm/bn-586.pl
new file mode 100644
index 00000000..332ef3e9
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/bn-586.pl
@@ -0,0 +1,774 @@
+#!/usr/local/bin/perl
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+$sse2=0;
+for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
+
+&external_label("OPENSSL_ia32cap_P") if ($sse2);
+
+&bn_mul_add_words("bn_mul_add_words");
+&bn_mul_words("bn_mul_words");
+&bn_sqr_words("bn_sqr_words");
+&bn_div_words("bn_div_words");
+&bn_add_words("bn_add_words");
+&bn_sub_words("bn_sub_words");
+&bn_sub_part_words("bn_sub_part_words");
+
+&asm_finish();
+
+sub bn_mul_add_words
+	{
+	local($name)=@_;
+
+	&function_begin_B($name,$sse2?"EXTRN\t_OPENSSL_ia32cap_P:DWORD":"");
+
+	$r="eax";
+	$a="edx";
+	$c="ecx";
+
+	if ($sse2) {
+		&picmeup("eax","OPENSSL_ia32cap_P");
+		&bt(&DWP(0,"eax"),26);
+		&jnc(&label("maw_non_sse2"));
+
+		&mov($r,&wparam(0));
+		&mov($a,&wparam(1));
+		&mov($c,&wparam(2));
+		&movd("mm0",&wparam(3));	# mm0 = w
+		&pxor("mm1","mm1");		# mm1 = carry_in
+		&jmp(&label("maw_sse2_entry"));
+		
+	&set_label("maw_sse2_unrolled",16);
+		&movd("mm3",&DWP(0,$r,"",0));	# mm3 = r[0]
+		&paddq("mm1","mm3");		# mm1 = carry_in + r[0]
+		&movd("mm2",&DWP(0,$a,"",0));	# mm2 = a[0]
+		&pmuludq("mm2","mm0");		# mm2 = w*a[0]
+		&movd("mm4",&DWP(4,$a,"",0));	# mm4 = a[1]
+		&pmuludq("mm4","mm0");		# mm4 = w*a[1]
+		&movd("mm6",&DWP(8,$a,"",0));	# mm6 = a[2]
+		&pmuludq("mm6","mm0");		# mm6 = w*a[2]
+		&movd("mm7",&DWP(12,$a,"",0));	# mm7 = a[3]
+		&pmuludq("mm7","mm0");		# mm7 = w*a[3]
+		&paddq("mm1","mm2");		# mm1 = carry_in + r[0] + w*a[0]
+		&movd("mm3",&DWP(4,$r,"",0));	# mm3 = r[1]
+		&paddq("mm3","mm4");		# mm3 = r[1] + w*a[1]
+		&movd("mm5",&DWP(8,$r,"",0));	# mm5 = r[2]
+		&paddq("mm5","mm6");		# mm5 = r[2] + w*a[2]
+		&movd("mm4",&DWP(12,$r,"",0));	# mm4 = r[3]
+		&paddq("mm7","mm4");		# mm7 = r[3] + w*a[3]
+		&movd(&DWP(0,$r,"",0),"mm1");
+		&movd("mm2",&DWP(16,$a,"",0));	# mm2 = a[4]
+		&pmuludq("mm2","mm0");		# mm2 = w*a[4]
+		&psrlq("mm1",32);		# mm1 = carry0
+		&movd("mm4",&DWP(20,$a,"",0));	# mm4 = a[5]
+		&pmuludq("mm4","mm0");		# mm4 = w*a[5]
+		&paddq("mm1","mm3");		# mm1 = carry0 + r[1] + w*a[1]
+		&movd("mm6",&DWP(24,$a,"",0));	# mm6 = a[6]
+		&pmuludq("mm6","mm0");		# mm6 = w*a[6]
+		&movd(&DWP(4,$r,"",0),"mm1");
+		&psrlq("mm1",32);		# mm1 = carry1
+		&movd("mm3",&DWP(28,$a,"",0));	# mm3 = a[7]
+		&add($a,32);
+		&pmuludq("mm3","mm0");		# mm3 = w*a[7]
+		&paddq("mm1","mm5");		# mm1 = carry1 + r[2] + w*a[2]
+		&movd("mm5",&DWP(16,$r,"",0));	# mm5 = r[4]
+		&paddq("mm2","mm5");		# mm2 = r[4] + w*a[4]
+		&movd(&DWP(8,$r,"",0),"mm1");
+		&psrlq("mm1",32);		# mm1 = carry2
+		&paddq("mm1","mm7");		# mm1 = carry2 + r[3] + w*a[3]
+		&movd("mm5",&DWP(20,$r,"",0));	# mm5 = r[5]
+		&paddq("mm4","mm5");		# mm4 = r[5] + w*a[5]
+		&movd(&DWP(12,$r,"",0),"mm1");
+		&psrlq("mm1",32);		# mm1 = carry3
+		&paddq("mm1","mm2");		# mm1 = carry3 + r[4] + w*a[4]
+		&movd("mm5",&DWP(24,$r,"",0));	# mm5 = r[6]
+		&paddq("mm6","mm5");		# mm6 = r[6] + w*a[6]
+		&movd(&DWP(16,$r,"",0),"mm1");
+		&psrlq("mm1",32);		# mm1 = carry4
+		&paddq("mm1","mm4");		# mm1 = carry4 + r[5] + w*a[5]
+		&movd("mm5",&DWP(28,$r,"",0));	# mm5 = r[7]
+		&paddq("mm3","mm5");		# mm3 = r[7] + w*a[7]
+		&movd(&DWP(20,$r,"",0),"mm1");
+		&psrlq("mm1",32);		# mm1 = carry5
+		&paddq("mm1","mm6");		# mm1 = carry5 + r[6] + w*a[6]
+		&movd(&DWP(24,$r,"",0),"mm1");
+		&psrlq("mm1",32);		# mm1 = carry6
+		&paddq("mm1","mm3");		# mm1 = carry6 + r[7] + w*a[7]
+		&movd(&DWP(28,$r,"",0),"mm1");
+		&lea($r,&DWP(32,$r));
+		&psrlq("mm1",32);		# mm1 = carry_out
+
+		&sub($c,8);
+		&jz(&label("maw_sse2_exit"));
+	&set_label("maw_sse2_entry");
+		&test($c,0xfffffff8);
+		&jnz(&label("maw_sse2_unrolled"));
+
+	&set_label("maw_sse2_loop",4);
+		&movd("mm2",&DWP(0,$a));	# mm2 = a[i]
+		&movd("mm3",&DWP(0,$r));	# mm3 = r[i]
+		&pmuludq("mm2","mm0");		# a[i] *= w
+		&lea($a,&DWP(4,$a));
+		&paddq("mm1","mm3");		# carry += r[i]
+		&paddq("mm1","mm2");		# carry += a[i]*w
+		&movd(&DWP(0,$r),"mm1");	# r[i] = carry_low
+		&sub($c,1);
+		&psrlq("mm1",32);		# carry = carry_high
+		&lea($r,&DWP(4,$r));
+		&jnz(&label("maw_sse2_loop"));
+	&set_label("maw_sse2_exit");
+		&movd("eax","mm1");		# c = carry_out
+		&emms();
+		&ret();
+
+	&set_label("maw_non_sse2",16);
+	}
+
+	# function_begin prologue
+	&push("ebp");
+	&push("ebx");
+	&push("esi");
+	&push("edi");
+
+	&comment("");
+	$Low="eax";
+	$High="edx";
+	$a="ebx";
+	$w="ebp";
+	$r="edi";
+	$c="esi";
+
+	&xor($c,$c);		# clear carry
+	&mov($r,&wparam(0));	#
+
+	&mov("ecx",&wparam(2));	#
+	&mov($a,&wparam(1));	#
+
+	&and("ecx",0xfffffff8);	# num / 8
+	&mov($w,&wparam(3));	#
+
+	&push("ecx");		# Up the stack for a tmp variable
+
+	&jz(&label("maw_finish"));
+
+	&set_label("maw_loop",16);
+
+	for ($i=0; $i<32; $i+=4)
+		{
+		&comment("Round $i");
+
+		 &mov("eax",&DWP($i,$a)); 	# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);			# L(t)+= c
+		&adc("edx",0);			# H(t)+=carry
+		 &add("eax",&DWP($i,$r));	# L(t)+= *r
+		&adc("edx",0);			# H(t)+=carry
+		 &mov(&DWP($i,$r),"eax");	# *r= L(t);
+		&mov($c,"edx");			# c=  H(t);
+		}
+
+	&comment("");
+	&sub("ecx",8);
+	&lea($a,&DWP(32,$a));
+	&lea($r,&DWP(32,$r));
+	&jnz(&label("maw_loop"));
+
+	&set_label("maw_finish",0);
+	&mov("ecx",&wparam(2));	# get num
+	&and("ecx",7);
+	&jnz(&label("maw_finish2"));	# helps branch prediction
+	&jmp(&label("maw_end"));
+
+	&set_label("maw_finish2",1);
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		 &mov("eax",&DWP($i*4,$a));	# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);			# L(t)+=c
+		&adc("edx",0);			# H(t)+=carry
+		 &add("eax",&DWP($i*4,$r));	# L(t)+= *r
+		&adc("edx",0);			# H(t)+=carry
+		 &dec("ecx") if ($i != 7-1);
+		&mov(&DWP($i*4,$r),"eax");	# *r= L(t);
+		 &mov($c,"edx");		# c=  H(t);
+		&jz(&label("maw_end")) if ($i != 7-1);
+		}
+	&set_label("maw_end",0);
+	&mov("eax",$c);
+
+	&pop("ecx");	# clear variable from
+
+	&function_end($name);
+	}
+
+sub bn_mul_words
+	{
+	local($name)=@_;
+
+	&function_begin_B($name,$sse2?"EXTRN\t_OPENSSL_ia32cap_P:DWORD":"");
+
+	$r="eax";
+	$a="edx";
+	$c="ecx";
+
+	if ($sse2) {
+		&picmeup("eax","OPENSSL_ia32cap_P");
+		&bt(&DWP(0,"eax"),26);
+		&jnc(&label("mw_non_sse2"));
+
+		&mov($r,&wparam(0));
+		&mov($a,&wparam(1));
+		&mov($c,&wparam(2));
+		&movd("mm0",&wparam(3));	# mm0 = w
+		&pxor("mm1","mm1");		# mm1 = carry = 0
+
+	&set_label("mw_sse2_loop",16);
+		&movd("mm2",&DWP(0,$a));	# mm2 = a[i]
+		&pmuludq("mm2","mm0");		# a[i] *= w
+		&lea($a,&DWP(4,$a));
+		&paddq("mm1","mm2");		# carry += a[i]*w
+		&movd(&DWP(0,$r),"mm1");	# r[i] = carry_low
+		&sub($c,1);
+		&psrlq("mm1",32);		# carry = carry_high
+		&lea($r,&DWP(4,$r));
+		&jnz(&label("mw_sse2_loop"));
+
+		&movd("eax","mm1");		# return carry
+		&emms();
+		&ret();
+	&set_label("mw_non_sse2",16);
+	}
+
+	# function_begin prologue
+	&push("ebp");
+	&push("ebx");
+	&push("esi");
+	&push("edi");
+
+	&comment("");
+	$Low="eax";
+	$High="edx";
+	$a="ebx";
+	$w="ecx";
+	$r="edi";
+	$c="esi";
+	$num="ebp";
+
+	&xor($c,$c);		# clear carry
+	&mov($r,&wparam(0));	#
+	&mov($a,&wparam(1));	#
+	&mov($num,&wparam(2));	#
+	&mov($w,&wparam(3));	#
+
+	&and($num,0xfffffff8);	# num / 8
+	&jz(&label("mw_finish"));
+
+	&set_label("mw_loop",0);
+	for ($i=0; $i<32; $i+=4)
+		{
+		&comment("Round $i");
+
+		 &mov("eax",&DWP($i,$a,"",0)); 	# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);			# L(t)+=c
+		 # XXX
+
+		&adc("edx",0);			# H(t)+=carry
+		 &mov(&DWP($i,$r,"",0),"eax");	# *r= L(t);
+
+		&mov($c,"edx");			# c=  H(t);
+		}
+
+	&comment("");
+	&add($a,32);
+	&add($r,32);
+	&sub($num,8);
+	&jz(&label("mw_finish"));
+	&jmp(&label("mw_loop"));
+
+	&set_label("mw_finish",0);
+	&mov($num,&wparam(2));	# get num
+	&and($num,7);
+	&jnz(&label("mw_finish2"));
+	&jmp(&label("mw_end"));
+
+	&set_label("mw_finish2",1);
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		 &mov("eax",&DWP($i*4,$a,"",0));# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);			# L(t)+=c
+		 # XXX
+		&adc("edx",0);			# H(t)+=carry
+		 &mov(&DWP($i*4,$r,"",0),"eax");# *r= L(t);
+		&mov($c,"edx");			# c=  H(t);
+		 &dec($num) if ($i != 7-1);
+		&jz(&label("mw_end")) if ($i != 7-1);
+		}
+	&set_label("mw_end",0);
+	&mov("eax",$c);
+
+	&function_end($name);
+	}
+
+sub bn_sqr_words
+	{
+	local($name)=@_;
+
+	&function_begin_B($name,$sse2?"EXTRN\t_OPENSSL_ia32cap_P:DWORD":"");
+
+	$r="eax";
+	$a="edx";
+	$c="ecx";
+
+	if ($sse2) {
+		&picmeup("eax","OPENSSL_ia32cap_P");
+		&bt(&DWP(0,"eax"),26);
+		&jnc(&label("sqr_non_sse2"));
+
+		&mov($r,&wparam(0));
+		&mov($a,&wparam(1));
+		&mov($c,&wparam(2));
+
+	&set_label("sqr_sse2_loop",16);
+		&movd("mm0",&DWP(0,$a));	# mm0 = a[i]
+		&pmuludq("mm0","mm0");		# a[i] *= a[i]
+		&lea($a,&DWP(4,$a));		# a++
+		&movq(&QWP(0,$r),"mm0");	# r[i] = a[i]*a[i]
+		&sub($c,1);
+		&lea($r,&DWP(8,$r));		# r += 2
+		&jnz(&label("sqr_sse2_loop"));
+
+		&emms();
+		&ret();
+	&set_label("sqr_non_sse2",16);
+	}
+
+	# function_begin prologue
+	&push("ebp");
+	&push("ebx");
+	&push("esi");
+	&push("edi");
+
+	&comment("");
+	$r="esi";
+	$a="edi";
+	$num="ebx";
+
+	&mov($r,&wparam(0));	#
+	&mov($a,&wparam(1));	#
+	&mov($num,&wparam(2));	#
+
+	&and($num,0xfffffff8);	# num / 8
+	&jz(&label("sw_finish"));
+
+	&set_label("sw_loop",0);
+	for ($i=0; $i<32; $i+=4)
+		{
+		&comment("Round $i");
+		&mov("eax",&DWP($i,$a,"",0)); 	# *a
+		 # XXX
+		&mul("eax");			# *a * *a
+		&mov(&DWP($i*2,$r,"",0),"eax");	#
+		 &mov(&DWP($i*2+4,$r,"",0),"edx");#
+		}
+
+	&comment("");
+	&add($a,32);
+	&add($r,64);
+	&sub($num,8);
+	&jnz(&label("sw_loop"));
+
+	&set_label("sw_finish",0);
+	&mov($num,&wparam(2));	# get num
+	&and($num,7);
+	&jz(&label("sw_end"));
+
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		&mov("eax",&DWP($i*4,$a,"",0));	# *a
+		 # XXX
+		&mul("eax");			# *a * *a
+		&mov(&DWP($i*8,$r,"",0),"eax");	#
+		 &dec($num) if ($i != 7-1);
+		&mov(&DWP($i*8+4,$r,"",0),"edx");
+		 &jz(&label("sw_end")) if ($i != 7-1);
+		}
+	&set_label("sw_end",0);
+
+	&function_end($name);
+	}
+
+sub bn_div_words
+	{
+	local($name)=@_;
+
+	&function_begin_B($name,"");
+	&mov("edx",&wparam(0));	#
+	&mov("eax",&wparam(1));	#
+	&mov("ecx",&wparam(2));	#
+	&div("ecx");
+	&ret();
+	&function_end_B($name);
+	}
+
+sub bn_add_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$a="esi";
+	$b="edi";
+	$c="eax";
+	$r="ebx";
+	$tmp1="ecx";
+	$tmp2="edx";
+	$num="ebp";
+
+	&mov($r,&wparam(0));	# get r
+	 &mov($a,&wparam(1));	# get a
+	&mov($b,&wparam(2));	# get b
+	 &mov($num,&wparam(3));	# get num
+	&xor($c,$c);		# clear carry
+	 &and($num,0xfffffff8);	# num / 8
+
+	&jz(&label("aw_finish"));
+
+	&set_label("aw_loop",0);
+	for ($i=0; $i<8; $i++)
+		{
+		&comment("Round $i");
+
+		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
+		&add($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &add($tmp1,$tmp2);
+		&adc($c,0);
+		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
+		}
+
+	&comment("");
+	&add($a,32);
+	 &add($b,32);
+	&add($r,32);
+	 &sub($num,8);
+	&jnz(&label("aw_loop"));
+
+	&set_label("aw_finish",0);
+	&mov($num,&wparam(3));	# get num
+	&and($num,7);
+	 &jz(&label("aw_end"));
+
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
+		&add($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &add($tmp1,$tmp2);
+		&adc($c,0);
+		 &dec($num) if ($i != 6);
+		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
+		 &jz(&label("aw_end")) if ($i != 6);
+		}
+	&set_label("aw_end",0);
+
+#	&mov("eax",$c);		# $c is "eax"
+
+	&function_end($name);
+	}
+
+sub bn_sub_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$a="esi";
+	$b="edi";
+	$c="eax";
+	$r="ebx";
+	$tmp1="ecx";
+	$tmp2="edx";
+	$num="ebp";
+
+	&mov($r,&wparam(0));	# get r
+	 &mov($a,&wparam(1));	# get a
+	&mov($b,&wparam(2));	# get b
+	 &mov($num,&wparam(3));	# get num
+	&xor($c,$c);		# clear carry
+	 &and($num,0xfffffff8);	# num / 8
+
+	&jz(&label("aw_finish"));
+
+	&set_label("aw_loop",0);
+	for ($i=0; $i<8; $i++)
+		{
+		&comment("Round $i");
+
+		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
+		&sub($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &sub($tmp1,$tmp2);
+		&adc($c,0);
+		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
+		}
+
+	&comment("");
+	&add($a,32);
+	 &add($b,32);
+	&add($r,32);
+	 &sub($num,8);
+	&jnz(&label("aw_loop"));
+
+	&set_label("aw_finish",0);
+	&mov($num,&wparam(3));	# get num
+	&and($num,7);
+	 &jz(&label("aw_end"));
+
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
+		&sub($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &sub($tmp1,$tmp2);
+		&adc($c,0);
+		 &dec($num) if ($i != 6);
+		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
+		 &jz(&label("aw_end")) if ($i != 6);
+		}
+	&set_label("aw_end",0);
+
+#	&mov("eax",$c);		# $c is "eax"
+
+	&function_end($name);
+	}
+
+sub bn_sub_part_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$a="esi";
+	$b="edi";
+	$c="eax";
+	$r="ebx";
+	$tmp1="ecx";
+	$tmp2="edx";
+	$num="ebp";
+
+	&mov($r,&wparam(0));	# get r
+	 &mov($a,&wparam(1));	# get a
+	&mov($b,&wparam(2));	# get b
+	 &mov($num,&wparam(3));	# get num
+	&xor($c,$c);		# clear carry
+	 &and($num,0xfffffff8);	# num / 8
+
+	&jz(&label("aw_finish"));
+
+	&set_label("aw_loop",0);
+	for ($i=0; $i<8; $i++)
+		{
+		&comment("Round $i");
+
+		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
+		&sub($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &sub($tmp1,$tmp2);
+		&adc($c,0);
+		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
+		}
+
+	&comment("");
+	&add($a,32);
+	 &add($b,32);
+	&add($r,32);
+	 &sub($num,8);
+	&jnz(&label("aw_loop"));
+
+	&set_label("aw_finish",0);
+	&mov($num,&wparam(3));	# get num
+	&and($num,7);
+	 &jz(&label("aw_end"));
+
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		&mov($tmp1,&DWP(0,$a,"",0));	# *a
+		 &mov($tmp2,&DWP(0,$b,"",0));# *b
+		&sub($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &sub($tmp1,$tmp2);
+		&adc($c,0);
+		&mov(&DWP(0,$r,"",0),$tmp1);	# *r
+		&add($a, 4);
+		&add($b, 4);
+		&add($r, 4);
+		 &dec($num) if ($i != 6);
+		 &jz(&label("aw_end")) if ($i != 6);
+		}
+	&set_label("aw_end",0);
+
+	&cmp(&wparam(4),0);
+	&je(&label("pw_end"));
+
+	&mov($num,&wparam(4));	# get dl
+	&cmp($num,0);
+	&je(&label("pw_end"));
+	&jge(&label("pw_pos"));
+
+	&comment("pw_neg");
+	&mov($tmp2,0);
+	&sub($tmp2,$num);
+	&mov($num,$tmp2);
+	&and($num,0xfffffff8);	# num / 8
+	&jz(&label("pw_neg_finish"));
+
+	&set_label("pw_neg_loop",0);
+	for ($i=0; $i<8; $i++)
+	{
+	    &comment("dl<0 Round $i");
+
+	    &mov($tmp1,0);
+	    &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
+	    &sub($tmp1,$c);
+	    &mov($c,0);
+	    &adc($c,$c);
+	    &sub($tmp1,$tmp2);
+	    &adc($c,0);
+	    &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
+	}
+	    
+	&comment("");
+	&add($b,32);
+	&add($r,32);
+	&sub($num,8);
+	&jnz(&label("pw_neg_loop"));
+	    
+	&set_label("pw_neg_finish",0);
+	&mov($tmp2,&wparam(4));	# get dl
+	&mov($num,0);
+	&sub($num,$tmp2);
+	&and($num,7);
+	&jz(&label("pw_end"));
+	    
+	for ($i=0; $i<7; $i++)
+	{
+	    &comment("dl<0 Tail Round $i");
+	    &mov($tmp1,0);
+	    &mov($tmp2,&DWP($i*4,$b,"",0));# *b
+	    &sub($tmp1,$c);
+	    &mov($c,0);
+	    &adc($c,$c);
+	    &sub($tmp1,$tmp2);
+	    &adc($c,0);
+	    &dec($num) if ($i != 6);
+	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
+	    &jz(&label("pw_end")) if ($i != 6);
+	}
+
+	&jmp(&label("pw_end"));
+	
+	&set_label("pw_pos",0);
+	
+	&and($num,0xfffffff8);	# num / 8
+	&jz(&label("pw_pos_finish"));
+
+	&set_label("pw_pos_loop",0);
+
+	for ($i=0; $i<8; $i++)
+	{
+	    &comment("dl>0 Round $i");
+
+	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+	    &sub($tmp1,$c);
+	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
+	    &jnc(&label("pw_nc".$i));
+	}
+	    
+	&comment("");
+	&add($a,32);
+	&add($r,32);
+	&sub($num,8);
+	&jnz(&label("pw_pos_loop"));
+	    
+	&set_label("pw_pos_finish",0);
+	&mov($num,&wparam(4));	# get dl
+	&and($num,7);
+	&jz(&label("pw_end"));
+	    
+	for ($i=0; $i<7; $i++)
+	{
+	    &comment("dl>0 Tail Round $i");
+	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+	    &sub($tmp1,$c);
+	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
+	    &jnc(&label("pw_tail_nc".$i));
+	    &dec($num) if ($i != 6);
+	    &jz(&label("pw_end")) if ($i != 6);
+	}
+	&mov($c,1);
+	&jmp(&label("pw_end"));
+
+	&set_label("pw_nc_loop",0);
+	for ($i=0; $i<8; $i++)
+	{
+	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
+	    &set_label("pw_nc".$i,0);
+	}
+	    
+	&comment("");
+	&add($a,32);
+	&add($r,32);
+	&sub($num,8);
+	&jnz(&label("pw_nc_loop"));
+	    
+	&mov($num,&wparam(4));	# get dl
+	&and($num,7);
+	&jz(&label("pw_nc_end"));
+	    
+	for ($i=0; $i<7; $i++)
+	{
+	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
+	    &set_label("pw_tail_nc".$i,0);
+	    &dec($num) if ($i != 6);
+	    &jz(&label("pw_nc_end")) if ($i != 6);
+	}
+
+	&set_label("pw_nc_end",0);
+	&mov($c,0);
+
+	&set_label("pw_end",0);
+
+#	&mov("eax",$c);		# $c is "eax"
+
+	&function_end($name);
+	}
+
diff --git a/app/openssl/crypto/bn/asm/co-586.pl b/app/openssl/crypto/bn/asm/co-586.pl
new file mode 100644
index 00000000..57101a6b
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/co-586.pl
@@ -0,0 +1,287 @@
+#!/usr/local/bin/perl
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+&bn_mul_comba("bn_mul_comba8",8);
+&bn_mul_comba("bn_mul_comba4",4);
+&bn_sqr_comba("bn_sqr_comba8",8);
+&bn_sqr_comba("bn_sqr_comba4",4);
+
+&asm_finish();
+
+sub mul_add_c
+	{
+	local($a,$ai,$b,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
+
+	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
+	# words, and 1 if load return value
+
+	&comment("mul a[$ai]*b[$bi]");
+
+	# "eax" and "edx" will always be pre-loaded.
+	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
+	# &mov("edx",&DWP($bi*4,$b,"",0));
+
+	&mul("edx");
+	&add($c0,"eax");
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# laod next a
+	 &mov("eax",&wparam(0)) if $pos > 0;			# load r[]
+	 ###
+	&adc($c1,"edx");
+	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 0;	# laod next b
+	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 1;	# laod next b
+	 ###
+	&adc($c2,0);
+	 # is pos > 1, it means it is the last loop 
+	 &mov(&DWP($i*4,"eax","",0),$c0) if $pos > 0;		# save r[];
+	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# laod next a
+	}
+
+sub sqr_add_c
+	{
+	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
+
+	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
+	# words, and 1 if load return value
+
+	&comment("sqr a[$ai]*a[$bi]");
+
+	# "eax" and "edx" will always be pre-loaded.
+	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
+	# &mov("edx",&DWP($bi*4,$b,"",0));
+
+	if ($ai == $bi)
+		{ &mul("eax");}
+	else
+		{ &mul("edx");}
+	&add($c0,"eax");
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
+	 ###
+	&adc($c1,"edx");
+	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos == 1) && ($na != $nb);
+	 ###
+	&adc($c2,0);
+	 # is pos > 1, it means it is the last loop 
+	 &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
+	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# load next b
+	}
+
+sub sqr_add_c2
+	{
+	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
+
+	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
+	# words, and 1 if load return value
+
+	&comment("sqr a[$ai]*a[$bi]");
+
+	# "eax" and "edx" will always be pre-loaded.
+	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
+	# &mov("edx",&DWP($bi*4,$a,"",0));
+
+	if ($ai == $bi)
+		{ &mul("eax");}
+	else
+		{ &mul("edx");}
+	&add("eax","eax");
+	 ###
+	&adc("edx","edx");
+	 ###
+	&adc($c2,0);
+	 &add($c0,"eax");
+	&adc($c1,"edx");
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;	# load next b
+	&adc($c2,0);
+	&mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
+	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos <= 1) && ($na != $nb);
+	 ###
+	}
+
+sub bn_mul_comba
+	{
+	local($name,$num)=@_;
+	local($a,$b,$c0,$c1,$c2);
+	local($i,$as,$ae,$bs,$be,$ai,$bi);
+	local($tot,$end);
+
+	&function_begin_B($name,"");
+
+	$c0="ebx";
+	$c1="ecx";
+	$c2="ebp";
+	$a="esi";
+	$b="edi";
+	
+	$as=0;
+	$ae=0;
+	$bs=0;
+	$be=0;
+	$tot=$num+$num-1;
+
+	&push("esi");
+	 &mov($a,&wparam(1));
+	&push("edi");
+	 &mov($b,&wparam(2));
+	&push("ebp");
+	 &push("ebx");
+
+	&xor($c0,$c0);
+	 &mov("eax",&DWP(0,$a,"",0));	# load the first word 
+	&xor($c1,$c1);
+	 &mov("edx",&DWP(0,$b,"",0));	# load the first second 
+
+	for ($i=0; $i<$tot; $i++)
+		{
+		$ai=$as;
+		$bi=$bs;
+		$end=$be+1;
+
+		&comment("################## Calculate word $i"); 
+
+		for ($j=$bs; $j<$end; $j++)
+			{
+			&xor($c2,$c2) if ($j == $bs);
+			if (($j+1) == $end)
+				{
+				$v=1;
+				$v=2 if (($i+1) == $tot);
+				}
+			else
+				{ $v=0; }
+			if (($j+1) != $end)
+				{
+				$na=($ai-1);
+				$nb=($bi+1);
+				}
+			else
+				{
+				$na=$as+($i < ($num-1));
+				$nb=$bs+($i >= ($num-1));
+				}
+#printf STDERR "[$ai,$bi] -> [$na,$nb]\n";
+			&mul_add_c($a,$ai,$b,$bi,$c0,$c1,$c2,$v,$i,$na,$nb);
+			if ($v)
+				{
+				&comment("saved r[$i]");
+				# &mov("eax",&wparam(0));
+				# &mov(&DWP($i*4,"eax","",0),$c0);
+				($c0,$c1,$c2)=($c1,$c2,$c0);
+				}
+			$ai--;
+			$bi++;
+			}
+		$as++ if ($i < ($num-1));
+		$ae++ if ($i >= ($num-1));
+
+		$bs++ if ($i >= ($num-1));
+		$be++ if ($i < ($num-1));
+		}
+	&comment("save r[$i]");
+	# &mov("eax",&wparam(0));
+	&mov(&DWP($i*4,"eax","",0),$c0);
+
+	&pop("ebx");
+	&pop("ebp");
+	&pop("edi");
+	&pop("esi");
+	&ret();
+	&function_end_B($name);
+	}
+
+sub bn_sqr_comba
+	{
+	local($name,$num)=@_;
+	local($r,$a,$c0,$c1,$c2)=@_;
+	local($i,$as,$ae,$bs,$be,$ai,$bi);
+	local($b,$tot,$end,$half);
+
+	&function_begin_B($name,"");
+
+	$c0="ebx";
+	$c1="ecx";
+	$c2="ebp";
+	$a="esi";
+	$r="edi";
+
+	&push("esi");
+	 &push("edi");
+	&push("ebp");
+	 &push("ebx");
+	&mov($r,&wparam(0));
+	 &mov($a,&wparam(1));
+	&xor($c0,$c0);
+	 &xor($c1,$c1);
+	&mov("eax",&DWP(0,$a,"",0)); # load the first word
+
+	$as=0;
+	$ae=0;
+	$bs=0;
+	$be=0;
+	$tot=$num+$num-1;
+
+	for ($i=0; $i<$tot; $i++)
+		{
+		$ai=$as;
+		$bi=$bs;
+		$end=$be+1;
+
+		&comment("############### Calculate word $i");
+		for ($j=$bs; $j<$end; $j++)
+			{
+			&xor($c2,$c2) if ($j == $bs);
+			if (($ai-1) < ($bi+1))
+				{
+				$v=1;
+				$v=2 if ($i+1) == $tot;
+				}
+			else
+				{ $v=0; }
+			if (!$v)
+				{
+				$na=$ai-1;
+				$nb=$bi+1;
+				}
+			else
+				{
+				$na=$as+($i < ($num-1));
+				$nb=$bs+($i >= ($num-1));
+				}
+			if ($ai == $bi)
+				{
+				&sqr_add_c($r,$a,$ai,$bi,
+					$c0,$c1,$c2,$v,$i,$na,$nb);
+				}
+			else
+				{
+				&sqr_add_c2($r,$a,$ai,$bi,
+					$c0,$c1,$c2,$v,$i,$na,$nb);
+				}
+			if ($v)
+				{
+				&comment("saved r[$i]");
+				#&mov(&DWP($i*4,$r,"",0),$c0);
+				($c0,$c1,$c2)=($c1,$c2,$c0);
+				last;
+				}
+			$ai--;
+			$bi++;
+			}
+		$as++ if ($i < ($num-1));
+		$ae++ if ($i >= ($num-1));
+
+		$bs++ if ($i >= ($num-1));
+		$be++ if ($i < ($num-1));
+		}
+	&mov(&DWP($i*4,$r,"",0),$c0);
+	&pop("ebx");
+	&pop("ebp");
+	&pop("edi");
+	&pop("esi");
+	&ret();
+	&function_end_B($name);
+	}
diff --git a/app/openssl/crypto/bn/asm/ia64.S b/app/openssl/crypto/bn/asm/ia64.S
new file mode 100644
index 00000000..951abc53
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/ia64.S
@@ -0,0 +1,1555 @@
+.explicit
+.text
+.ident	"ia64.S, Version 2.1"
+.ident	"IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+
+//
+// ====================================================================
+// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+// project.
+//
+// Rights for redistribution and usage in source and binary forms are
+// granted according to the OpenSSL license. Warranty of any kind is
+// disclaimed.
+// ====================================================================
+//
+// Version 2.x is Itanium2 re-tune. Few words about how Itanum2 is
+// different from Itanium to this module viewpoint. Most notably, is it
+// "wider" than Itanium? Can you experience loop scalability as
+// discussed in commentary sections? Not really:-( Itanium2 has 6
+// integer ALU ports, i.e. it's 2 ports wider, but it's not enough to
+// spin twice as fast, as I need 8 IALU ports. Amount of floating point
+// ports is the same, i.e. 2, while I need 4. In other words, to this
+// module Itanium2 remains effectively as "wide" as Itanium. Yet it's
+// essentially different in respect to this module, and a re-tune was
+// required. Well, because some intruction latencies has changed. Most
+// noticeably those intensively used:
+//
+//			Itanium	Itanium2
+//	ldf8		9	6		L2 hit
+//	ld8		2	1		L1 hit
+//	getf		2	5
+//	xma[->getf]	7[+1]	4[+0]
+//	add[->st8]	1[+1]	1[+0]
+//
+// What does it mean? You might ratiocinate that the original code
+// should run just faster... Because sum of latencies is smaller...
+// Wrong! Note that getf latency increased. This means that if a loop is
+// scheduled for lower latency (as they were), then it will suffer from
+// stall condition and the code will therefore turn anti-scalable, e.g.
+// original bn_mul_words spun at 5*n or 2.5 times slower than expected
+// on Itanium2! What to do? Reschedule loops for Itanium2? But then
+// Itanium would exhibit anti-scalability. So I've chosen to reschedule
+// for worst latency for every instruction aiming for best *all-round*
+// performance.  
+
+// Q.	How much faster does it get?
+// A.	Here is the output from 'openssl speed rsa dsa' for vanilla
+//	0.9.6a compiled with gcc version 2.96 20000731 (Red Hat
+//	Linux 7.1 2.96-81):
+//
+//	                  sign    verify    sign/s verify/s
+//	rsa  512 bits   0.0036s   0.0003s    275.3   2999.2
+//	rsa 1024 bits   0.0203s   0.0011s     49.3    894.1
+//	rsa 2048 bits   0.1331s   0.0040s      7.5    250.9
+//	rsa 4096 bits   0.9270s   0.0147s      1.1     68.1
+//	                  sign    verify    sign/s verify/s
+//	dsa  512 bits   0.0035s   0.0043s    288.3    234.8
+//	dsa 1024 bits   0.0111s   0.0135s     90.0     74.2
+//
+//	And here is similar output but for this assembler
+//	implementation:-)
+//
+//	                  sign    verify    sign/s verify/s
+//	rsa  512 bits   0.0021s   0.0001s    549.4   9638.5
+//	rsa 1024 bits   0.0055s   0.0002s    183.8   4481.1
+//	rsa 2048 bits   0.0244s   0.0006s     41.4   1726.3
+//	rsa 4096 bits   0.1295s   0.0018s      7.7    561.5
+//	                  sign    verify    sign/s verify/s
+//	dsa  512 bits   0.0012s   0.0013s    891.9    756.6
+//	dsa 1024 bits   0.0023s   0.0028s    440.4    376.2
+//	
+//	Yes, you may argue that it's not fair comparison as it's
+//	possible to craft the C implementation with BN_UMULT_HIGH
+//	inline assembler macro. But of course! Here is the output
+//	with the macro:
+//
+//	                  sign    verify    sign/s verify/s
+//	rsa  512 bits   0.0020s   0.0002s    495.0   6561.0
+//	rsa 1024 bits   0.0086s   0.0004s    116.2   2235.7
+//	rsa 2048 bits   0.0519s   0.0015s     19.3    667.3
+//	rsa 4096 bits   0.3464s   0.0053s      2.9    187.7
+//	                  sign    verify    sign/s verify/s
+//	dsa  512 bits   0.0016s   0.0020s    613.1    510.5
+//	dsa 1024 bits   0.0045s   0.0054s    221.0    183.9
+//
+//	My code is still way faster, huh:-) And I believe that even
+//	higher performance can be achieved. Note that as keys get
+//	longer, performance gain is larger. Why? According to the
+//	profiler there is another player in the field, namely
+//	BN_from_montgomery consuming larger and larger portion of CPU
+//	time as keysize decreases. I therefore consider putting effort
+//	to assembler implementation of the following routine:
+//
+//	void bn_mul_add_mont (BN_ULONG *rp,BN_ULONG *np,int nl,BN_ULONG n0)
+//	{
+//	int      i,j;
+//	BN_ULONG v;
+//
+//	for (i=0; i<nl; i++)
+//		{
+//		v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2);
+//		nrp++;
+//		rp++;
+//		if (((nrp[-1]+=v)&BN_MASK2) < v)
+//			for (j=0; ((++nrp[j])&BN_MASK2) == 0; j++) ;
+//		}
+//	}
+//
+//	It might as well be beneficial to implement even combaX
+//	variants, as it appears as it can literally unleash the
+//	performance (see comment section to bn_mul_comba8 below).
+//
+//	And finally for your reference the output for 0.9.6a compiled
+//	with SGIcc version 0.01.0-12 (keep in mind that for the moment
+//	of this writing it's not possible to convince SGIcc to use
+//	BN_UMULT_HIGH inline assembler macro, yet the code is fast,
+//	i.e. for a compiler generated one:-):
+//
+//	                  sign    verify    sign/s verify/s
+//	rsa  512 bits   0.0022s   0.0002s    452.7   5894.3
+//	rsa 1024 bits   0.0097s   0.0005s    102.7   2002.9
+//	rsa 2048 bits   0.0578s   0.0017s     17.3    600.2
+//	rsa 4096 bits   0.3838s   0.0061s      2.6    164.5
+//	                  sign    verify    sign/s verify/s
+//	dsa  512 bits   0.0018s   0.0022s    547.3    459.6
+//	dsa 1024 bits   0.0051s   0.0062s    196.6    161.3
+//
+//	Oh! Benchmarks were performed on 733MHz Lion-class Itanium
+//	system running Redhat Linux 7.1 (very special thanks to Ray
+//	McCaffity of Williams Communications for providing an account).
+//
+// Q.	What's the heck with 'rum 1<<5' at the end of every function?
+// A.	Well, by clearing the "upper FP registers written" bit of the
+//	User Mask I want to excuse the kernel from preserving upper
+//	(f32-f128) FP register bank over process context switch, thus
+//	minimizing bus bandwidth consumption during the switch (i.e.
+//	after PKI opration completes and the program is off doing
+//	something else like bulk symmetric encryption). Having said
+//	this, I also want to point out that it might be good idea
+//	to compile the whole toolkit (as well as majority of the
+//	programs for that matter) with -mfixed-range=f32-f127 command
+//	line option. No, it doesn't prevent the compiler from writing
+//	to upper bank, but at least discourages to do so. If you don't
+//	like the idea you have the option to compile the module with
+//	-Drum=nop.m in command line.
+//
+
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+#define	ADDP	addp4
+#else
+#define	ADDP	add
+#endif
+
+#if 1
+//
+// bn_[add|sub]_words routines.
+//
+// Loops are spinning in 2*(n+5) ticks on Itanuim (provided that the
+// data reside in L1 cache, i.e. 2 ticks away). It's possible to
+// compress the epilogue and get down to 2*n+6, but at the cost of
+// scalability (the neat feature of this implementation is that it
+// shall automagically spin in n+5 on "wider" IA-64 implementations:-)
+// I consider that the epilogue is short enough as it is to trade tiny
+// performance loss on Itanium for scalability.
+//
+// BN_ULONG bn_add_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num)
+//
+.global	bn_add_words#
+.proc	bn_add_words#
+.align	64
+.skip	32	// makes the loop body aligned at 64-byte boundary
+bn_add_words:
+	.prologue
+	.save	ar.pfs,r2
+{ .mii;	alloc		r2=ar.pfs,4,12,0,16
+	cmp4.le		p6,p0=r35,r0	};;
+{ .mfb;	mov		r8=r0			// return value
+(p6)	br.ret.spnt.many	b0	};;
+
+{ .mib;	sub		r10=r35,r0,1
+	.save	ar.lc,r3
+	mov		r3=ar.lc
+	brp.loop.imp	.L_bn_add_words_ctop,.L_bn_add_words_cend-16
+					}
+{ .mib;	ADDP		r14=0,r32		// rp
+	.save	pr,r9
+	mov		r9=pr		};;
+	.body
+{ .mii;	ADDP		r15=0,r33		// ap
+	mov		ar.lc=r10
+	mov		ar.ec=6		}
+{ .mib;	ADDP		r16=0,r34		// bp
+	mov		pr.rot=1<<16	};;
+
+.L_bn_add_words_ctop:
+{ .mii;	(p16)	ld8		r32=[r16],8	  // b=*(bp++)
+	(p18)	add		r39=r37,r34
+	(p19)	cmp.ltu.unc	p56,p0=r40,r38	}
+{ .mfb;	(p0)	nop.m		0x0
+	(p0)	nop.f		0x0
+	(p0)	nop.b		0x0		}
+{ .mii;	(p16)	ld8		r35=[r15],8	  // a=*(ap++)
+	(p58)	cmp.eq.or	p57,p0=-1,r41	  // (p20)
+	(p58)	add		r41=1,r41	} // (p20)
+{ .mfb;	(p21)	st8		[r14]=r42,8	  // *(rp++)=r
+	(p0)	nop.f		0x0
+	br.ctop.sptk	.L_bn_add_words_ctop	};;
+.L_bn_add_words_cend:
+
+{ .mii;
+(p59)	add		r8=1,r8		// return value
+	mov		pr=r9,0x1ffff
+	mov		ar.lc=r3	}
+{ .mbb;	nop.b		0x0
+	br.ret.sptk.many	b0	};;
+.endp	bn_add_words#
+
+//
+// BN_ULONG bn_sub_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num)
+//
+.global	bn_sub_words#
+.proc	bn_sub_words#
+.align	64
+.skip	32	// makes the loop body aligned at 64-byte boundary
+bn_sub_words:
+	.prologue
+	.save	ar.pfs,r2
+{ .mii;	alloc		r2=ar.pfs,4,12,0,16
+	cmp4.le		p6,p0=r35,r0	};;
+{ .mfb;	mov		r8=r0			// return value
+(p6)	br.ret.spnt.many	b0	};;
+
+{ .mib;	sub		r10=r35,r0,1
+	.save	ar.lc,r3
+	mov		r3=ar.lc
+	brp.loop.imp	.L_bn_sub_words_ctop,.L_bn_sub_words_cend-16
+					}
+{ .mib;	ADDP		r14=0,r32		// rp
+	.save	pr,r9
+	mov		r9=pr		};;
+	.body
+{ .mii;	ADDP		r15=0,r33		// ap
+	mov		ar.lc=r10
+	mov		ar.ec=6		}
+{ .mib;	ADDP		r16=0,r34		// bp
+	mov		pr.rot=1<<16	};;
+
+.L_bn_sub_words_ctop:
+{ .mii;	(p16)	ld8		r32=[r16],8	  // b=*(bp++)
+	(p18)	sub		r39=r37,r34
+	(p19)	cmp.gtu.unc	p56,p0=r40,r38	}
+{ .mfb;	(p0)	nop.m		0x0
+	(p0)	nop.f		0x0
+	(p0)	nop.b		0x0		}
+{ .mii;	(p16)	ld8		r35=[r15],8	  // a=*(ap++)
+	(p58)	cmp.eq.or	p57,p0=0,r41	  // (p20)
+	(p58)	add		r41=-1,r41	} // (p20)
+{ .mbb;	(p21)	st8		[r14]=r42,8	  // *(rp++)=r
+	(p0)	nop.b		0x0
+	br.ctop.sptk	.L_bn_sub_words_ctop	};;
+.L_bn_sub_words_cend:
+
+{ .mii;
+(p59)	add		r8=1,r8		// return value
+	mov		pr=r9,0x1ffff
+	mov		ar.lc=r3	}
+{ .mbb;	nop.b		0x0
+	br.ret.sptk.many	b0	};;
+.endp	bn_sub_words#
+#endif
+
+#if 0
+#define XMA_TEMPTATION
+#endif
+
+#if 1
+//
+// BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+//
+.global	bn_mul_words#
+.proc	bn_mul_words#
+.align	64
+.skip	32	// makes the loop body aligned at 64-byte boundary
+bn_mul_words:
+	.prologue
+	.save	ar.pfs,r2
+#ifdef XMA_TEMPTATION
+{ .mfi;	alloc		r2=ar.pfs,4,0,0,0	};;
+#else
+{ .mfi;	alloc		r2=ar.pfs,4,12,0,16	};;
+#endif
+{ .mib;	mov		r8=r0			// return value
+	cmp4.le		p6,p0=r34,r0
+(p6)	br.ret.spnt.many	b0		};;
+
+{ .mii;	sub	r10=r34,r0,1
+	.save	ar.lc,r3
+	mov	r3=ar.lc
+	.save	pr,r9
+	mov	r9=pr			};;
+
+	.body
+{ .mib;	setf.sig	f8=r35	// w
+	mov		pr.rot=0x800001<<16
+			// ------^----- serves as (p50) at first (p27)
+	brp.loop.imp	.L_bn_mul_words_ctop,.L_bn_mul_words_cend-16
+					}
+
+#ifndef XMA_TEMPTATION
+
+{ .mmi;	ADDP		r14=0,r32	// rp
+	ADDP		r15=0,r33	// ap
+	mov		ar.lc=r10	}
+{ .mmi;	mov		r40=0		// serves as r35 at first (p27)
+	mov		ar.ec=13	};;
+
+// This loop spins in 2*(n+12) ticks. It's scheduled for data in Itanium
+// L2 cache (i.e. 9 ticks away) as floating point load/store instructions
+// bypass L1 cache and L2 latency is actually best-case scenario for
+// ldf8. The loop is not scalable and shall run in 2*(n+12) even on
+// "wider" IA-64 implementations. It's a trade-off here. n+24 loop
+// would give us ~5% in *overall* performance improvement on "wider"
+// IA-64, but would hurt Itanium for about same because of longer
+// epilogue. As it's a matter of few percents in either case I've
+// chosen to trade the scalability for development time (you can see
+// this very instruction sequence in bn_mul_add_words loop which in
+// turn is scalable).
+.L_bn_mul_words_ctop:
+{ .mfi;	(p25)	getf.sig	r36=f52			// low
+	(p21)	xmpy.lu		f48=f37,f8
+	(p28)	cmp.ltu		p54,p50=r41,r39	}
+{ .mfi;	(p16)	ldf8		f32=[r15],8
+	(p21)	xmpy.hu		f40=f37,f8
+	(p0)	nop.i		0x0		};;
+{ .mii;	(p25)	getf.sig	r32=f44			// high
+	.pred.rel	"mutex",p50,p54
+	(p50)	add		r40=r38,r35		// (p27)
+	(p54)	add		r40=r38,r35,1	}	// (p27)
+{ .mfb;	(p28)	st8		[r14]=r41,8
+	(p0)	nop.f		0x0
+	br.ctop.sptk	.L_bn_mul_words_ctop	};;
+.L_bn_mul_words_cend:
+
+{ .mii;	nop.m		0x0
+.pred.rel	"mutex",p51,p55
+(p51)	add		r8=r36,r0
+(p55)	add		r8=r36,r0,1	}
+{ .mfb;	nop.m	0x0
+	nop.f	0x0
+	nop.b	0x0			}
+
+#else	// XMA_TEMPTATION
+
+	setf.sig	f37=r0	// serves as carry at (p18) tick
+	mov		ar.lc=r10
+	mov		ar.ec=5;;
+
+// Most of you examining this code very likely wonder why in the name
+// of Intel the following loop is commented out? Indeed, it looks so
+// neat that you find it hard to believe that it's something wrong
+// with it, right? The catch is that every iteration depends on the
+// result from previous one and the latter isn't available instantly.
+// The loop therefore spins at the latency of xma minus 1, or in other
+// words at 6*(n+4) ticks:-( Compare to the "production" loop above
+// that runs in 2*(n+11) where the low latency problem is worked around
+// by moving the dependency to one-tick latent interger ALU. Note that
+// "distance" between ldf8 and xma is not latency of ldf8, but the
+// *difference* between xma and ldf8 latencies.
+.L_bn_mul_words_ctop:
+{ .mfi;	(p16)	ldf8		f32=[r33],8
+	(p18)	xma.hu		f38=f34,f8,f39	}
+{ .mfb;	(p20)	stf8		[r32]=f37,8
+	(p18)	xma.lu		f35=f34,f8,f39
+	br.ctop.sptk	.L_bn_mul_words_ctop	};;
+.L_bn_mul_words_cend:
+
+	getf.sig	r8=f41		// the return value
+
+#endif	// XMA_TEMPTATION
+
+{ .mii;	nop.m		0x0
+	mov		pr=r9,0x1ffff
+	mov		ar.lc=r3	}
+{ .mfb;	rum		1<<5		// clear um.mfh
+	nop.f		0x0
+	br.ret.sptk.many	b0	};;
+.endp	bn_mul_words#
+#endif
+
+#if 1
+//
+// BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+//
+.global	bn_mul_add_words#
+.proc	bn_mul_add_words#
+.align	64
+.skip	48	// makes the loop body aligned at 64-byte boundary
+bn_mul_add_words:
+	.prologue
+	.save	ar.pfs,r2
+{ .mmi;	alloc		r2=ar.pfs,4,4,0,8
+	cmp4.le		p6,p0=r34,r0
+	.save	ar.lc,r3
+	mov		r3=ar.lc	};;
+{ .mib;	mov		r8=r0		// return value
+	sub		r10=r34,r0,1
+(p6)	br.ret.spnt.many	b0	};;
+
+{ .mib;	setf.sig	f8=r35		// w
+	.save	pr,r9
+	mov		r9=pr
+	brp.loop.imp	.L_bn_mul_add_words_ctop,.L_bn_mul_add_words_cend-16
+					}
+	.body
+{ .mmi;	ADDP		r14=0,r32	// rp
+	ADDP		r15=0,r33	// ap
+	mov		ar.lc=r10	}
+{ .mii;	ADDP		r16=0,r32	// rp copy
+	mov		pr.rot=0x2001<<16
+			// ------^----- serves as (p40) at first (p27)
+	mov		ar.ec=11	};;
+
+// This loop spins in 3*(n+10) ticks on Itanium and in 2*(n+10) on
+// Itanium 2. Yes, unlike previous versions it scales:-) Previous
+// version was peforming *all* additions in IALU and was starving
+// for those even on Itanium 2. In this version one addition is
+// moved to FPU and is folded with multiplication. This is at cost
+// of propogating the result from previous call to this subroutine
+// to L2 cache... In other words negligible even for shorter keys.
+// *Overall* performance improvement [over previous version] varies
+// from 11 to 22 percent depending on key length.
+.L_bn_mul_add_words_ctop:
+.pred.rel	"mutex",p40,p42
+{ .mfi;	(p23)	getf.sig	r36=f45			// low
+	(p20)	xma.lu		f42=f36,f8,f50		// low
+	(p40)	add		r39=r39,r35	}	// (p27)
+{ .mfi;	(p16)	ldf8		f32=[r15],8		// *(ap++)
+	(p20)	xma.hu		f36=f36,f8,f50		// high
+	(p42)	add		r39=r39,r35,1	};;	// (p27)
+{ .mmi;	(p24)	getf.sig	r32=f40			// high
+	(p16)	ldf8		f46=[r16],8		// *(rp1++)
+	(p40)	cmp.ltu		p41,p39=r39,r35	}	// (p27)
+{ .mib;	(p26)	st8		[r14]=r39,8		// *(rp2++)
+	(p42)	cmp.leu		p41,p39=r39,r35		// (p27)
+	br.ctop.sptk	.L_bn_mul_add_words_ctop};;
+.L_bn_mul_add_words_cend:
+
+{ .mmi;	.pred.rel	"mutex",p40,p42
+(p40)	add		r8=r35,r0
+(p42)	add		r8=r35,r0,1
+	mov		pr=r9,0x1ffff	}
+{ .mib;	rum		1<<5		// clear um.mfh
+	mov		ar.lc=r3
+	br.ret.sptk.many	b0	};;
+.endp	bn_mul_add_words#
+#endif
+
+#if 1
+//
+// void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num)
+//
+.global	bn_sqr_words#
+.proc	bn_sqr_words#
+.align	64
+.skip	32	// makes the loop body aligned at 64-byte boundary 
+bn_sqr_words:
+	.prologue
+	.save	ar.pfs,r2
+{ .mii;	alloc		r2=ar.pfs,3,0,0,0
+	sxt4		r34=r34		};;
+{ .mii;	cmp.le		p6,p0=r34,r0
+	mov		r8=r0		}	// return value
+{ .mfb;	ADDP		r32=0,r32
+	nop.f		0x0
+(p6)	br.ret.spnt.many	b0	};;
+
+{ .mii;	sub	r10=r34,r0,1
+	.save	ar.lc,r3
+	mov	r3=ar.lc
+	.save	pr,r9
+	mov	r9=pr			};;
+
+	.body
+{ .mib;	ADDP		r33=0,r33
+	mov		pr.rot=1<<16
+	brp.loop.imp	.L_bn_sqr_words_ctop,.L_bn_sqr_words_cend-16
+					}
+{ .mii;	add		r34=8,r32
+	mov		ar.lc=r10
+	mov		ar.ec=18	};;
+
+// 2*(n+17) on Itanium, (n+17) on "wider" IA-64 implementations. It's
+// possible to compress the epilogue (I'm getting tired to write this
+// comment over and over) and get down to 2*n+16 at the cost of
+// scalability. The decision will very likely be reconsidered after the
+// benchmark program is profiled. I.e. if perfomance gain on Itanium
+// will appear larger than loss on "wider" IA-64, then the loop should
+// be explicitely split and the epilogue compressed.
+.L_bn_sqr_words_ctop:
+{ .mfi;	(p16)	ldf8		f32=[r33],8
+	(p25)	xmpy.lu		f42=f41,f41
+	(p0)	nop.i		0x0		}
+{ .mib;	(p33)	stf8		[r32]=f50,16
+	(p0)	nop.i		0x0
+	(p0)	nop.b		0x0		}
+{ .mfi;	(p0)	nop.m		0x0
+	(p25)	xmpy.hu		f52=f41,f41
+	(p0)	nop.i		0x0		}
+{ .mib;	(p33)	stf8		[r34]=f60,16
+	(p0)	nop.i		0x0
+	br.ctop.sptk	.L_bn_sqr_words_ctop	};;
+.L_bn_sqr_words_cend:
+
+{ .mii;	nop.m		0x0
+	mov		pr=r9,0x1ffff
+	mov		ar.lc=r3	}
+{ .mfb;	rum		1<<5		// clear um.mfh
+	nop.f		0x0
+	br.ret.sptk.many	b0	};;
+.endp	bn_sqr_words#
+#endif
+
+#if 1
+// Apparently we win nothing by implementing special bn_sqr_comba8.
+// Yes, it is possible to reduce the number of multiplications by
+// almost factor of two, but then the amount of additions would
+// increase by factor of two (as we would have to perform those
+// otherwise performed by xma ourselves). Normally we would trade
+// anyway as multiplications are way more expensive, but not this
+// time... Multiplication kernel is fully pipelined and as we drain
+// one 128-bit multiplication result per clock cycle multiplications
+// are effectively as inexpensive as additions. Special implementation
+// might become of interest for "wider" IA-64 implementation as you'll
+// be able to get through the multiplication phase faster (there won't
+// be any stall issues as discussed in the commentary section below and
+// you therefore will be able to employ all 4 FP units)... But these
+// Itanium days it's simply too hard to justify the effort so I just
+// drop down to bn_mul_comba8 code:-)
+//
+// void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
+//
+.global	bn_sqr_comba8#
+.proc	bn_sqr_comba8#
+.align	64
+bn_sqr_comba8:
+	.prologue
+	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii;	alloc	r2=ar.pfs,2,1,0,0
+	addp4	r33=0,r33
+	addp4	r32=0,r32		};;
+{ .mii;
+#else
+{ .mii;	alloc	r2=ar.pfs,2,1,0,0
+#endif
+	mov	r34=r33
+	add	r14=8,r33		};;
+	.body
+{ .mii;	add	r17=8,r34
+	add	r15=16,r33
+	add	r18=16,r34		}
+{ .mfb;	add	r16=24,r33
+	br	.L_cheat_entry_point8	};;
+.endp	bn_sqr_comba8#
+#endif
+
+#if 1
+// I've estimated this routine to run in ~120 ticks, but in reality
+// (i.e. according to ar.itc) it takes ~160 ticks. Are those extra
+// cycles consumed for instructions fetch? Or did I misinterpret some
+// clause in Itanium µ-architecture manual? Comments are welcomed and
+// highly appreciated.
+//
+// On Itanium 2 it takes ~190 ticks. This is because of stalls on
+// result from getf.sig. I do nothing about it at this point for
+// reasons depicted below.
+//
+// However! It should be noted that even 160 ticks is darn good result
+// as it's over 10 (yes, ten, spelled as t-e-n) times faster than the
+// C version (compiled with gcc with inline assembler). I really
+// kicked compiler's butt here, didn't I? Yeah! This brings us to the
+// following statement. It's damn shame that this routine isn't called
+// very often nowadays! According to the profiler most CPU time is
+// consumed by bn_mul_add_words called from BN_from_montgomery. In
+// order to estimate what we're missing, I've compared the performance
+// of this routine against "traditional" implementation, i.e. against
+// following routine:
+//
+// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+// {	r[ 8]=bn_mul_words(    &(r[0]),a,8,b[0]);
+//	r[ 9]=bn_mul_add_words(&(r[1]),a,8,b[1]);
+//	r[10]=bn_mul_add_words(&(r[2]),a,8,b[2]);
+//	r[11]=bn_mul_add_words(&(r[3]),a,8,b[3]);
+//	r[12]=bn_mul_add_words(&(r[4]),a,8,b[4]);
+//	r[13]=bn_mul_add_words(&(r[5]),a,8,b[5]);
+//	r[14]=bn_mul_add_words(&(r[6]),a,8,b[6]);
+//	r[15]=bn_mul_add_words(&(r[7]),a,8,b[7]);
+// }
+//
+// The one below is over 8 times faster than the one above:-( Even
+// more reasons to "combafy" bn_mul_add_mont...
+//
+// And yes, this routine really made me wish there were an optimizing
+// assembler! It also feels like it deserves a dedication.
+//
+//	To my wife for being there and to my kids...
+//
+// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+//
+#define	carry1	r14
+#define	carry2	r15
+#define	carry3	r34
+.global	bn_mul_comba8#
+.proc	bn_mul_comba8#
+.align	64
+bn_mul_comba8:
+	.prologue
+	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii;	alloc	r2=ar.pfs,3,0,0,0
+	addp4	r33=0,r33
+	addp4	r34=0,r34		};;
+{ .mii;	addp4	r32=0,r32
+#else
+{ .mii;	alloc   r2=ar.pfs,3,0,0,0
+#endif
+	add	r14=8,r33
+	add	r17=8,r34		}
+	.body
+{ .mii;	add	r15=16,r33
+	add	r18=16,r34
+	add	r16=24,r33		}
+.L_cheat_entry_point8:
+{ .mmi;	add	r19=24,r34
+
+	ldf8	f32=[r33],32		};;
+
+{ .mmi;	ldf8	f120=[r34],32
+	ldf8	f121=[r17],32		}
+{ .mmi;	ldf8	f122=[r18],32
+	ldf8	f123=[r19],32		};;
+{ .mmi;	ldf8	f124=[r34]
+	ldf8	f125=[r17]		}
+{ .mmi;	ldf8	f126=[r18]
+	ldf8	f127=[r19]		}
+
+{ .mmi;	ldf8	f33=[r14],32
+	ldf8	f34=[r15],32		}
+{ .mmi;	ldf8	f35=[r16],32;;
+	ldf8	f36=[r33]		}
+{ .mmi;	ldf8	f37=[r14]
+	ldf8	f38=[r15]		}
+{ .mfi;	ldf8	f39=[r16]
+// -------\ Entering multiplier's heaven /-------
+// ------------\                    /------------
+// -----------------\          /-----------------
+// ----------------------\/----------------------
+		xma.hu	f41=f32,f120,f0		}
+{ .mfi;		xma.lu	f40=f32,f120,f0		};; // (*)
+{ .mfi;		xma.hu	f51=f32,f121,f0		}
+{ .mfi;		xma.lu	f50=f32,f121,f0		};;
+{ .mfi;		xma.hu	f61=f32,f122,f0		}
+{ .mfi;		xma.lu	f60=f32,f122,f0		};;
+{ .mfi;		xma.hu	f71=f32,f123,f0		}
+{ .mfi;		xma.lu	f70=f32,f123,f0		};;
+{ .mfi;		xma.hu	f81=f32,f124,f0		}
+{ .mfi;		xma.lu	f80=f32,f124,f0		};;
+{ .mfi;		xma.hu	f91=f32,f125,f0		}
+{ .mfi;		xma.lu	f90=f32,f125,f0		};;
+{ .mfi;		xma.hu	f101=f32,f126,f0	}
+{ .mfi;		xma.lu	f100=f32,f126,f0	};;
+{ .mfi;		xma.hu	f111=f32,f127,f0	}
+{ .mfi;		xma.lu	f110=f32,f127,f0	};;//
+// (*)	You can argue that splitting at every second bundle would
+//	prevent "wider" IA-64 implementations from achieving the peak
+//	performance. Well, not really... The catch is that if you
+//	intend to keep 4 FP units busy by splitting at every fourth
+//	bundle and thus perform these 16 multiplications in 4 ticks,
+//	the first bundle *below* would stall because the result from
+//	the first xma bundle *above* won't be available for another 3
+//	ticks (if not more, being an optimist, I assume that "wider"
+//	implementation will have same latency:-). This stall will hold
+//	you back and the performance would be as if every second bundle
+//	were split *anyway*...
+{ .mfi;	getf.sig	r16=f40
+		xma.hu	f42=f33,f120,f41
+	add		r33=8,r32		}
+{ .mfi;		xma.lu	f41=f33,f120,f41	};;
+{ .mfi;	getf.sig	r24=f50
+		xma.hu	f52=f33,f121,f51	}
+{ .mfi;		xma.lu	f51=f33,f121,f51	};;
+{ .mfi;	st8		[r32]=r16,16
+		xma.hu	f62=f33,f122,f61	}
+{ .mfi;		xma.lu	f61=f33,f122,f61	};;
+{ .mfi;		xma.hu	f72=f33,f123,f71	}
+{ .mfi;		xma.lu	f71=f33,f123,f71	};;
+{ .mfi;		xma.hu	f82=f33,f124,f81	}
+{ .mfi;		xma.lu	f81=f33,f124,f81	};;
+{ .mfi;		xma.hu	f92=f33,f125,f91	}
+{ .mfi;		xma.lu	f91=f33,f125,f91	};;
+{ .mfi;		xma.hu	f102=f33,f126,f101	}
+{ .mfi;		xma.lu	f101=f33,f126,f101	};;
+{ .mfi;		xma.hu	f112=f33,f127,f111	}
+{ .mfi;		xma.lu	f111=f33,f127,f111	};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r25=f41
+		xma.hu	f43=f34,f120,f42	}
+{ .mfi;		xma.lu	f42=f34,f120,f42	};;
+{ .mfi;	getf.sig	r16=f60
+		xma.hu	f53=f34,f121,f52	}
+{ .mfi;		xma.lu	f52=f34,f121,f52	};;
+{ .mfi;	getf.sig	r17=f51
+		xma.hu	f63=f34,f122,f62
+	add		r25=r25,r24		}
+{ .mfi;		xma.lu	f62=f34,f122,f62
+	mov		carry1=0		};;
+{ .mfi;	cmp.ltu		p6,p0=r25,r24
+		xma.hu	f73=f34,f123,f72	}
+{ .mfi;		xma.lu	f72=f34,f123,f72	};;
+{ .mfi;	st8		[r33]=r25,16
+		xma.hu	f83=f34,f124,f82
+(p6)	add		carry1=1,carry1		}
+{ .mfi;		xma.lu	f82=f34,f124,f82	};;
+{ .mfi;		xma.hu	f93=f34,f125,f92	}
+{ .mfi;		xma.lu	f92=f34,f125,f92	};;
+{ .mfi;		xma.hu	f103=f34,f126,f102	}
+{ .mfi;		xma.lu	f102=f34,f126,f102	};;
+{ .mfi;		xma.hu	f113=f34,f127,f112	}
+{ .mfi;		xma.lu	f112=f34,f127,f112	};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r18=f42
+		xma.hu	f44=f35,f120,f43
+	add		r17=r17,r16		}
+{ .mfi;		xma.lu	f43=f35,f120,f43	};;
+{ .mfi;	getf.sig	r24=f70
+		xma.hu	f54=f35,f121,f53	}
+{ .mfi;	mov		carry2=0
+		xma.lu	f53=f35,f121,f53	};;
+{ .mfi;	getf.sig	r25=f61
+		xma.hu	f64=f35,f122,f63
+	cmp.ltu		p7,p0=r17,r16		}
+{ .mfi;	add		r18=r18,r17
+		xma.lu	f63=f35,f122,f63	};;
+{ .mfi;	getf.sig	r26=f52
+		xma.hu	f74=f35,f123,f73
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r18,r17
+		xma.lu	f73=f35,f123,f73
+	add		r18=r18,carry1		};;
+{ .mfi;
+		xma.hu	f84=f35,f124,f83
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r18,carry1
+		xma.lu	f83=f35,f124,f83	};;
+{ .mfi;	st8		[r32]=r18,16
+		xma.hu	f94=f35,f125,f93
+(p7)	add		carry2=1,carry2		}
+{ .mfi;		xma.lu	f93=f35,f125,f93	};;
+{ .mfi;		xma.hu	f104=f35,f126,f103	}
+{ .mfi;		xma.lu	f103=f35,f126,f103	};;
+{ .mfi;		xma.hu	f114=f35,f127,f113	}
+{ .mfi;	mov		carry1=0
+		xma.lu	f113=f35,f127,f113
+	add		r25=r25,r24		};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r27=f43
+		xma.hu	f45=f36,f120,f44
+	cmp.ltu		p6,p0=r25,r24		}
+{ .mfi;		xma.lu	f44=f36,f120,f44	
+	add		r26=r26,r25		};;
+{ .mfi;	getf.sig	r16=f80
+		xma.hu	f55=f36,f121,f54
+(p6)	add		carry1=1,carry1		}
+{ .mfi;		xma.lu	f54=f36,f121,f54	};;
+{ .mfi;	getf.sig	r17=f71
+		xma.hu	f65=f36,f122,f64
+	cmp.ltu		p6,p0=r26,r25		}
+{ .mfi;		xma.lu	f64=f36,f122,f64
+	add		r27=r27,r26		};;
+{ .mfi;	getf.sig	r18=f62
+		xma.hu	f75=f36,f123,f74
+(p6)	add		carry1=1,carry1		}
+{ .mfi;	cmp.ltu		p6,p0=r27,r26
+		xma.lu	f74=f36,f123,f74
+	add		r27=r27,carry2		};;
+{ .mfi;	getf.sig	r19=f53
+		xma.hu	f85=f36,f124,f84
+(p6)	add		carry1=1,carry1		}
+{ .mfi;		xma.lu	f84=f36,f124,f84
+	cmp.ltu		p6,p0=r27,carry2	};;
+{ .mfi;	st8		[r33]=r27,16
+		xma.hu	f95=f36,f125,f94
+(p6)	add		carry1=1,carry1		}
+{ .mfi;		xma.lu	f94=f36,f125,f94	};;
+{ .mfi;		xma.hu	f105=f36,f126,f104	}
+{ .mfi;	mov		carry2=0
+		xma.lu	f104=f36,f126,f104
+	add		r17=r17,r16		};;
+{ .mfi;		xma.hu	f115=f36,f127,f114
+	cmp.ltu		p7,p0=r17,r16		}
+{ .mfi;		xma.lu	f114=f36,f127,f114
+	add		r18=r18,r17		};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r20=f44
+		xma.hu	f46=f37,f120,f45
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r18,r17
+		xma.lu	f45=f37,f120,f45
+	add		r19=r19,r18		};;
+{ .mfi;	getf.sig	r24=f90
+		xma.hu	f56=f37,f121,f55	}
+{ .mfi;		xma.lu	f55=f37,f121,f55	};;
+{ .mfi;	getf.sig	r25=f81
+		xma.hu	f66=f37,f122,f65
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r19,r18
+		xma.lu	f65=f37,f122,f65
+	add		r20=r20,r19		};;
+{ .mfi;	getf.sig	r26=f72
+		xma.hu	f76=f37,f123,f75
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r20,r19
+		xma.lu	f75=f37,f123,f75
+	add		r20=r20,carry1		};;
+{ .mfi;	getf.sig	r27=f63
+		xma.hu	f86=f37,f124,f85
+(p7)	add		carry2=1,carry2		}
+{ .mfi;		xma.lu	f85=f37,f124,f85
+	cmp.ltu		p7,p0=r20,carry1	};;
+{ .mfi;	getf.sig	r28=f54
+		xma.hu	f96=f37,f125,f95
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	st8		[r32]=r20,16
+		xma.lu	f95=f37,f125,f95	};;
+{ .mfi;		xma.hu	f106=f37,f126,f105	}
+{ .mfi;	mov		carry1=0
+		xma.lu	f105=f37,f126,f105
+	add		r25=r25,r24		};;
+{ .mfi;		xma.hu	f116=f37,f127,f115
+	cmp.ltu		p6,p0=r25,r24		}
+{ .mfi;		xma.lu	f115=f37,f127,f115
+	add		r26=r26,r25		};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r29=f45
+		xma.hu	f47=f38,f120,f46
+(p6)	add		carry1=1,carry1		}
+{ .mfi;	cmp.ltu		p6,p0=r26,r25
+		xma.lu	f46=f38,f120,f46
+	add		r27=r27,r26		};;
+{ .mfi;	getf.sig	r16=f100
+		xma.hu	f57=f38,f121,f56
+(p6)	add		carry1=1,carry1		}
+{ .mfi;	cmp.ltu		p6,p0=r27,r26
+		xma.lu	f56=f38,f121,f56
+	add		r28=r28,r27		};;
+{ .mfi;	getf.sig	r17=f91
+		xma.hu	f67=f38,f122,f66
+(p6)	add		carry1=1,carry1		}
+{ .mfi;	cmp.ltu		p6,p0=r28,r27
+		xma.lu	f66=f38,f122,f66
+	add		r29=r29,r28		};;
+{ .mfi;	getf.sig	r18=f82
+		xma.hu	f77=f38,f123,f76
+(p6)	add		carry1=1,carry1		}
+{ .mfi;	cmp.ltu		p6,p0=r29,r28
+		xma.lu	f76=f38,f123,f76
+	add		r29=r29,carry2		};;
+{ .mfi;	getf.sig	r19=f73
+		xma.hu	f87=f38,f124,f86
+(p6)	add		carry1=1,carry1		}
+{ .mfi;		xma.lu	f86=f38,f124,f86
+	cmp.ltu		p6,p0=r29,carry2	};;
+{ .mfi;	getf.sig	r20=f64
+		xma.hu	f97=f38,f125,f96
+(p6)	add		carry1=1,carry1		}
+{ .mfi;	st8		[r33]=r29,16
+		xma.lu	f96=f38,f125,f96	};;
+{ .mfi;	getf.sig	r21=f55
+		xma.hu	f107=f38,f126,f106	}
+{ .mfi;	mov		carry2=0
+		xma.lu	f106=f38,f126,f106
+	add		r17=r17,r16		};;
+{ .mfi;		xma.hu	f117=f38,f127,f116
+	cmp.ltu		p7,p0=r17,r16		}
+{ .mfi;		xma.lu	f116=f38,f127,f116
+	add		r18=r18,r17		};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r22=f46
+		xma.hu	f48=f39,f120,f47
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r18,r17
+		xma.lu	f47=f39,f120,f47
+	add		r19=r19,r18		};;
+{ .mfi;	getf.sig	r24=f110
+		xma.hu	f58=f39,f121,f57
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r19,r18
+		xma.lu	f57=f39,f121,f57
+	add		r20=r20,r19		};;
+{ .mfi;	getf.sig	r25=f101
+		xma.hu	f68=f39,f122,f67
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r20,r19
+		xma.lu	f67=f39,f122,f67
+	add		r21=r21,r20		};;
+{ .mfi;	getf.sig	r26=f92
+		xma.hu	f78=f39,f123,f77
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r21,r20
+		xma.lu	f77=f39,f123,f77
+	add		r22=r22,r21		};;
+{ .mfi;	getf.sig	r27=f83
+		xma.hu	f88=f39,f124,f87
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	cmp.ltu		p7,p0=r22,r21
+		xma.lu	f87=f39,f124,f87
+	add		r22=r22,carry1		};;
+{ .mfi;	getf.sig	r28=f74
+		xma.hu	f98=f39,f125,f97
+(p7)	add		carry2=1,carry2		}
+{ .mfi;		xma.lu	f97=f39,f125,f97
+	cmp.ltu		p7,p0=r22,carry1	};;
+{ .mfi;	getf.sig	r29=f65
+		xma.hu	f108=f39,f126,f107
+(p7)	add		carry2=1,carry2		}
+{ .mfi;	st8		[r32]=r22,16
+		xma.lu	f107=f39,f126,f107	};;
+{ .mfi;	getf.sig	r30=f56
+		xma.hu	f118=f39,f127,f117	}
+{ .mfi;		xma.lu	f117=f39,f127,f117	};;//
+//-------------------------------------------------//
+// Leaving muliplier's heaven... Quite a ride, huh?
+
+{ .mii;	getf.sig	r31=f47
+	add		r25=r25,r24
+	mov		carry1=0		};;
+{ .mii;		getf.sig	r16=f111
+	cmp.ltu		p6,p0=r25,r24
+	add		r26=r26,r25		};;
+{ .mfb;		getf.sig	r17=f102	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,r25
+	add		r27=r27,r26		};;
+{ .mfb;	nop.m	0x0				}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r27,r26
+	add		r28=r28,r27		};;
+{ .mii;		getf.sig	r18=f93
+		add		r17=r17,r16
+		mov		carry3=0	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r28,r27
+	add		r29=r29,r28		};;
+{ .mii;		getf.sig	r19=f84
+		cmp.ltu		p7,p0=r17,r16	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r29,r28
+	add		r30=r30,r29		};;
+{ .mii;		getf.sig	r20=f75
+		add		r18=r18,r17	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r30,r29
+	add		r31=r31,r30		};;
+{ .mfb;		getf.sig	r21=f66		}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r18,r17
+		add		r19=r19,r18	}
+{ .mfb;	nop.m	0x0				}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r31,r30
+	add		r31=r31,carry2		};;
+{ .mfb;		getf.sig	r22=f57		}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r19,r18
+		add		r20=r20,r19	}
+{ .mfb;	nop.m	0x0				}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r31,carry2	};;
+{ .mfb;		getf.sig	r23=f48		}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r20,r19
+		add		r21=r21,r20	}
+{ .mii;
+(p6)	add		carry1=1,carry1		}
+{ .mfb;	st8		[r33]=r31,16		};;
+
+{ .mfb;	getf.sig	r24=f112		}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r21,r20
+		add		r22=r22,r21	};;
+{ .mfb;	getf.sig	r25=f103		}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r22,r21
+		add		r23=r23,r22	};;
+{ .mfb;	getf.sig	r26=f94			}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r23,r22
+		add		r23=r23,carry1	};;
+{ .mfb;	getf.sig	r27=f85			}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p8=r23,carry1};;
+{ .mii;	getf.sig	r28=f76
+	add		r25=r25,r24
+	mov		carry1=0		}
+{ .mii;		st8		[r32]=r23,16
+	(p7)	add		carry2=1,carry3
+	(p8)	add		carry2=0,carry3	};;
+
+{ .mfb;	nop.m	0x0				}
+{ .mii;	getf.sig	r29=f67
+	cmp.ltu		p6,p0=r25,r24
+	add		r26=r26,r25		};;
+{ .mfb;	getf.sig	r30=f58			}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,r25
+	add		r27=r27,r26		};;
+{ .mfb;		getf.sig	r16=f113	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r27,r26
+	add		r28=r28,r27		};;
+{ .mfb;		getf.sig	r17=f104	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r28,r27
+	add		r29=r29,r28		};;
+{ .mfb;		getf.sig	r18=f95		}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r29,r28
+	add		r30=r30,r29		};;
+{ .mii;		getf.sig	r19=f86
+		add		r17=r17,r16
+		mov		carry3=0	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r30,r29
+	add		r30=r30,carry2		};;
+{ .mii;		getf.sig	r20=f77
+		cmp.ltu		p7,p0=r17,r16
+		add		r18=r18,r17	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r30,carry2	};;
+{ .mfb;		getf.sig	r21=f68		}
+{ .mii;	st8		[r33]=r30,16
+(p6)	add		carry1=1,carry1		};;
+
+{ .mfb;	getf.sig	r24=f114		}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r18,r17
+		add		r19=r19,r18	};;
+{ .mfb;	getf.sig	r25=f105		}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r19,r18
+		add		r20=r20,r19	};;
+{ .mfb;	getf.sig	r26=f96			}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r20,r19
+		add		r21=r21,r20	};;
+{ .mfb;	getf.sig	r27=f87			}
+{ .mii;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p0=r21,r20
+		add		r21=r21,carry1	};;
+{ .mib;	getf.sig	r28=f78			
+	add		r25=r25,r24		}
+{ .mib;	(p7)	add		carry3=1,carry3
+		cmp.ltu		p7,p8=r21,carry1};;
+{ .mii;		st8		[r32]=r21,16
+	(p7)	add		carry2=1,carry3
+	(p8)	add		carry2=0,carry3	}
+
+{ .mii;	mov		carry1=0
+	cmp.ltu		p6,p0=r25,r24
+	add		r26=r26,r25		};;
+{ .mfb;		getf.sig	r16=f115	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,r25
+	add		r27=r27,r26		};;
+{ .mfb;		getf.sig	r17=f106	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r27,r26
+	add		r28=r28,r27		};;
+{ .mfb;		getf.sig	r18=f97		}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r28,r27
+	add		r28=r28,carry2		};;
+{ .mib;		getf.sig	r19=f88
+		add		r17=r17,r16	}
+{ .mib;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r28,carry2	};;
+{ .mii;	st8		[r33]=r28,16
+(p6)	add		carry1=1,carry1		}
+
+{ .mii;		mov		carry2=0
+		cmp.ltu		p7,p0=r17,r16
+		add		r18=r18,r17	};;
+{ .mfb;	getf.sig	r24=f116		}
+{ .mii;	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r18,r17
+		add		r19=r19,r18	};;
+{ .mfb;	getf.sig	r25=f107		}
+{ .mii;	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r19,r18
+		add		r19=r19,carry1	};;
+{ .mfb;	getf.sig	r26=f98			}
+{ .mii;	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r19,carry1};;
+{ .mii;		st8		[r32]=r19,16
+	(p7)	add		carry2=1,carry2	}
+
+{ .mfb;	add		r25=r25,r24		};;
+
+{ .mfb;		getf.sig	r16=f117	}
+{ .mii;	mov		carry1=0
+	cmp.ltu		p6,p0=r25,r24
+	add		r26=r26,r25		};;
+{ .mfb;		getf.sig	r17=f108	}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,r25
+	add		r26=r26,carry2		};;
+{ .mfb;	nop.m	0x0				}
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,carry2	};;
+{ .mii;	st8		[r33]=r26,16
+(p6)	add		carry1=1,carry1		}
+
+{ .mfb;		add		r17=r17,r16	};;
+{ .mfb;	getf.sig	r24=f118		}
+{ .mii;		mov		carry2=0
+		cmp.ltu		p7,p0=r17,r16
+		add		r17=r17,carry1	};;
+{ .mii;	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r17,carry1};;
+{ .mii;		st8		[r32]=r17
+	(p7)	add		carry2=1,carry2	};;
+{ .mfb;	add		r24=r24,carry2		};;
+{ .mib;	st8		[r33]=r24		}
+
+{ .mib;	rum		1<<5		// clear um.mfh
+	br.ret.sptk.many	b0	};;
+.endp	bn_mul_comba8#
+#undef	carry3
+#undef	carry2
+#undef	carry1
+#endif
+
+#if 1
+// It's possible to make it faster (see comment to bn_sqr_comba8), but
+// I reckon it doesn't worth the effort. Basically because the routine
+// (actually both of them) practically never called... So I just play
+// same trick as with bn_sqr_comba8.
+//
+// void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
+//
+.global	bn_sqr_comba4#
+.proc	bn_sqr_comba4#
+.align	64
+bn_sqr_comba4:
+	.prologue
+	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii;	alloc   r2=ar.pfs,2,1,0,0
+	addp4	r32=0,r32
+	addp4	r33=0,r33		};;
+{ .mii;
+#else
+{ .mii;	alloc	r2=ar.pfs,2,1,0,0
+#endif
+	mov	r34=r33
+	add	r14=8,r33		};;
+	.body
+{ .mii;	add	r17=8,r34
+	add	r15=16,r33
+	add	r18=16,r34		}
+{ .mfb;	add	r16=24,r33
+	br	.L_cheat_entry_point4	};;
+.endp	bn_sqr_comba4#
+#endif
+
+#if 1
+// Runs in ~115 cycles and ~4.5 times faster than C. Well, whatever...
+//
+// void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+//
+#define	carry1	r14
+#define	carry2	r15
+.global	bn_mul_comba4#
+.proc	bn_mul_comba4#
+.align	64
+bn_mul_comba4:
+	.prologue
+	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && !defined(_LP64)
+{ .mii;	alloc   r2=ar.pfs,3,0,0,0
+	addp4	r33=0,r33
+	addp4	r34=0,r34		};;
+{ .mii;	addp4	r32=0,r32
+#else
+{ .mii;	alloc	r2=ar.pfs,3,0,0,0
+#endif
+	add	r14=8,r33
+	add	r17=8,r34		}
+	.body
+{ .mii;	add	r15=16,r33
+	add	r18=16,r34
+	add	r16=24,r33		};;
+.L_cheat_entry_point4:
+{ .mmi;	add	r19=24,r34
+
+	ldf8	f32=[r33]		}
+
+{ .mmi;	ldf8	f120=[r34]
+	ldf8	f121=[r17]		};;
+{ .mmi;	ldf8	f122=[r18]
+	ldf8	f123=[r19]		}
+
+{ .mmi;	ldf8	f33=[r14]
+	ldf8	f34=[r15]		}
+{ .mfi;	ldf8	f35=[r16]
+
+		xma.hu	f41=f32,f120,f0		}
+{ .mfi;		xma.lu	f40=f32,f120,f0		};;
+{ .mfi;		xma.hu	f51=f32,f121,f0		}
+{ .mfi;		xma.lu	f50=f32,f121,f0		};;
+{ .mfi;		xma.hu	f61=f32,f122,f0		}
+{ .mfi;		xma.lu	f60=f32,f122,f0		};;
+{ .mfi;		xma.hu	f71=f32,f123,f0		}
+{ .mfi;		xma.lu	f70=f32,f123,f0		};;//
+// Major stall takes place here, and 3 more places below. Result from
+// first xma is not available for another 3 ticks.
+{ .mfi;	getf.sig	r16=f40
+		xma.hu	f42=f33,f120,f41
+	add		r33=8,r32		}
+{ .mfi;		xma.lu	f41=f33,f120,f41	};;
+{ .mfi;	getf.sig	r24=f50
+		xma.hu	f52=f33,f121,f51	}
+{ .mfi;		xma.lu	f51=f33,f121,f51	};;
+{ .mfi;	st8		[r32]=r16,16
+		xma.hu	f62=f33,f122,f61	}
+{ .mfi;		xma.lu	f61=f33,f122,f61	};;
+{ .mfi;		xma.hu	f72=f33,f123,f71	}
+{ .mfi;		xma.lu	f71=f33,f123,f71	};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r25=f41
+		xma.hu	f43=f34,f120,f42	}
+{ .mfi;		xma.lu	f42=f34,f120,f42	};;
+{ .mfi;	getf.sig	r16=f60
+		xma.hu	f53=f34,f121,f52	}
+{ .mfi;		xma.lu	f52=f34,f121,f52	};;
+{ .mfi;	getf.sig	r17=f51
+		xma.hu	f63=f34,f122,f62
+	add		r25=r25,r24		}
+{ .mfi;	mov		carry1=0
+		xma.lu	f62=f34,f122,f62	};;
+{ .mfi;	st8		[r33]=r25,16
+		xma.hu	f73=f34,f123,f72
+	cmp.ltu		p6,p0=r25,r24		}
+{ .mfi;		xma.lu	f72=f34,f123,f72	};;//
+//-------------------------------------------------//
+{ .mfi;	getf.sig	r18=f42
+		xma.hu	f44=f35,f120,f43
+(p6)	add		carry1=1,carry1		}
+{ .mfi;	add		r17=r17,r16
+		xma.lu	f43=f35,f120,f43
+	mov		carry2=0		};;
+{ .mfi;	getf.sig	r24=f70
+		xma.hu	f54=f35,f121,f53
+	cmp.ltu		p7,p0=r17,r16		}
+{ .mfi;		xma.lu	f53=f35,f121,f53	};;
+{ .mfi;	getf.sig	r25=f61
+		xma.hu	f64=f35,f122,f63
+	add		r18=r18,r17		}
+{ .mfi;		xma.lu	f63=f35,f122,f63
+(p7)	add		carry2=1,carry2		};;
+{ .mfi;	getf.sig	r26=f52
+		xma.hu	f74=f35,f123,f73
+	cmp.ltu		p7,p0=r18,r17		}
+{ .mfi;		xma.lu	f73=f35,f123,f73
+	add		r18=r18,carry1		};;
+//-------------------------------------------------//
+{ .mii;	st8		[r32]=r18,16
+(p7)	add		carry2=1,carry2
+	cmp.ltu		p7,p0=r18,carry1	};;
+
+{ .mfi;	getf.sig	r27=f43	// last major stall
+(p7)	add		carry2=1,carry2		};;
+{ .mii;		getf.sig	r16=f71
+	add		r25=r25,r24
+	mov		carry1=0		};;
+{ .mii;		getf.sig	r17=f62	
+	cmp.ltu		p6,p0=r25,r24
+	add		r26=r26,r25		};;
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,r25
+	add		r27=r27,r26		};;
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r27,r26
+	add		r27=r27,carry2		};;
+{ .mii;		getf.sig	r18=f53
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r27,carry2	};;
+{ .mfi;	st8		[r33]=r27,16
+(p6)	add		carry1=1,carry1		}
+
+{ .mii;		getf.sig	r19=f44
+		add		r17=r17,r16
+		mov		carry2=0	};;
+{ .mii;	getf.sig	r24=f72
+		cmp.ltu		p7,p0=r17,r16
+		add		r18=r18,r17	};;
+{ .mii;	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r18,r17
+		add		r19=r19,r18	};;
+{ .mii;	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r19,r18
+		add		r19=r19,carry1	};;
+{ .mii;	getf.sig	r25=f63
+	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r19,carry1};;
+{ .mii;		st8		[r32]=r19,16
+	(p7)	add		carry2=1,carry2	}
+
+{ .mii;	getf.sig	r26=f54
+	add		r25=r25,r24
+	mov		carry1=0		};;
+{ .mii;		getf.sig	r16=f73
+	cmp.ltu		p6,p0=r25,r24
+	add		r26=r26,r25		};;
+{ .mii;
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,r25
+	add		r26=r26,carry2		};;
+{ .mii;		getf.sig	r17=f64
+(p6)	add		carry1=1,carry1
+	cmp.ltu		p6,p0=r26,carry2	};;
+{ .mii;	st8		[r33]=r26,16
+(p6)	add		carry1=1,carry1		}
+
+{ .mii;	getf.sig	r24=f74
+		add		r17=r17,r16	
+		mov		carry2=0	};;
+{ .mii;		cmp.ltu		p7,p0=r17,r16
+		add		r17=r17,carry1	};;
+
+{ .mii;	(p7)	add		carry2=1,carry2
+		cmp.ltu		p7,p0=r17,carry1};;
+{ .mii;		st8		[r32]=r17,16
+	(p7)	add		carry2=1,carry2	};;
+
+{ .mii;	add		r24=r24,carry2		};;
+{ .mii;	st8		[r33]=r24		}
+
+{ .mib;	rum		1<<5		// clear um.mfh
+	br.ret.sptk.many	b0	};;
+.endp	bn_mul_comba4#
+#undef	carry2
+#undef	carry1
+#endif
+
+#if 1
+//
+// BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
+//
+// In the nutshell it's a port of my MIPS III/IV implementation.
+//
+#define	AT	r14
+#define	H	r16
+#define	HH	r20
+#define	L	r17
+#define	D	r18
+#define	DH	r22
+#define	I	r21
+
+#if 0
+// Some preprocessors (most notably HP-UX) appear to be allergic to
+// macros enclosed to parenthesis [as these three were].
+#define	cont	p16
+#define	break	p0	// p20
+#define	equ	p24
+#else
+cont=p16
+break=p0
+equ=p24
+#endif
+
+.global	abort#
+.global	bn_div_words#
+.proc	bn_div_words#
+.align	64
+bn_div_words:
+	.prologue
+	.save	ar.pfs,r2
+{ .mii;	alloc		r2=ar.pfs,3,5,0,8
+	.save	b0,r3
+	mov		r3=b0
+	.save	pr,r10
+	mov		r10=pr		};;
+{ .mmb;	cmp.eq		p6,p0=r34,r0
+	mov		r8=-1
+(p6)	br.ret.spnt.many	b0	};;
+
+	.body
+{ .mii;	mov		H=r32		// save h
+	mov		ar.ec=0		// don't rotate at exit
+	mov		pr.rot=0	}
+{ .mii;	mov		L=r33		// save l
+	mov		r36=r0		};;
+
+.L_divw_shift:	// -vv- note signed comparison
+{ .mfi;	(p0)	cmp.lt		p16,p0=r0,r34	// d
+	(p0)	shladd		r33=r34,1,r0	}
+{ .mfb;	(p0)	add		r35=1,r36
+	(p0)	nop.f		0x0
+(p16)	br.wtop.dpnt		.L_divw_shift	};;
+
+{ .mii;	mov		D=r34
+	shr.u		DH=r34,32
+	sub		r35=64,r36		};;
+{ .mii;	setf.sig	f7=DH
+	shr.u		AT=H,r35
+	mov		I=r36			};;
+{ .mib;	cmp.ne		p6,p0=r0,AT
+	shl		H=H,r36
+(p6)	br.call.spnt.clr	b0=abort	};;	// overflow, die...
+
+{ .mfi;	fcvt.xuf.s1	f7=f7
+	shr.u		AT=L,r35		};;
+{ .mii;	shl		L=L,r36
+	or		H=H,AT			};;
+
+{ .mii;	nop.m		0x0
+	cmp.leu		p6,p0=D,H;;
+(p6)	sub		H=H,D			}
+
+{ .mlx;	setf.sig	f14=D
+	movl		AT=0xffffffff		};;
+///////////////////////////////////////////////////////////
+{ .mii;	setf.sig	f6=H
+	shr.u		HH=H,32;;
+	cmp.eq		p6,p7=HH,DH		};;
+{ .mfb;
+(p6)	setf.sig	f8=AT
+(p7)	fcvt.xuf.s1	f6=f6
+(p7)	br.call.sptk	b6=.L_udiv64_32_b6	};;
+
+{ .mfi;	getf.sig	r33=f8				// q
+	xmpy.lu		f9=f8,f14		}
+{ .mfi;	xmpy.hu		f10=f8,f14
+	shrp		H=H,L,32		};;
+
+{ .mmi;	getf.sig	r35=f9				// tl
+	getf.sig	r31=f10			};;	// th
+
+.L_divw_1st_iter:
+{ .mii;	(p0)	add		r32=-1,r33
+	(p0)	cmp.eq		equ,cont=HH,r31		};;
+{ .mii;	(p0)	cmp.ltu		p8,p0=r35,D
+	(p0)	sub		r34=r35,D
+	(equ)	cmp.leu		break,cont=r35,H	};;
+{ .mib;	(cont)	cmp.leu		cont,break=HH,r31
+	(p8)	add		r31=-1,r31
+(cont)	br.wtop.spnt		.L_divw_1st_iter	};;
+///////////////////////////////////////////////////////////
+{ .mii;	sub		H=H,r35
+	shl		r8=r33,32
+	shl		L=L,32			};;
+///////////////////////////////////////////////////////////
+{ .mii;	setf.sig	f6=H
+	shr.u		HH=H,32;;
+	cmp.eq		p6,p7=HH,DH		};;
+{ .mfb;
+(p6)	setf.sig	f8=AT
+(p7)	fcvt.xuf.s1	f6=f6
+(p7)	br.call.sptk	b6=.L_udiv64_32_b6	};;
+
+{ .mfi;	getf.sig	r33=f8				// q
+	xmpy.lu		f9=f8,f14		}
+{ .mfi;	xmpy.hu		f10=f8,f14
+	shrp		H=H,L,32		};;
+
+{ .mmi;	getf.sig	r35=f9				// tl
+	getf.sig	r31=f10			};;	// th
+
+.L_divw_2nd_iter:
+{ .mii;	(p0)	add		r32=-1,r33
+	(p0)	cmp.eq		equ,cont=HH,r31		};;
+{ .mii;	(p0)	cmp.ltu		p8,p0=r35,D
+	(p0)	sub		r34=r35,D
+	(equ)	cmp.leu		break,cont=r35,H	};;
+{ .mib;	(cont)	cmp.leu		cont,break=HH,r31
+	(p8)	add		r31=-1,r31
+(cont)	br.wtop.spnt		.L_divw_2nd_iter	};;
+///////////////////////////////////////////////////////////
+{ .mii;	sub	H=H,r35
+	or	r8=r8,r33
+	mov	ar.pfs=r2		};;
+{ .mii;	shr.u	r9=H,I			// remainder if anybody wants it
+	mov	pr=r10,0x1ffff		}
+{ .mfb;	br.ret.sptk.many	b0	};;
+
+// Unsigned 64 by 32 (well, by 64 for the moment) bit integer division
+// procedure.
+//
+// inputs:	f6 = (double)a, f7 = (double)b
+// output:	f8 = (int)(a/b)
+// clobbered:	f8,f9,f10,f11,pred
+pred=p15
+// One can argue that this snippet is copyrighted to Intel
+// Corporation, as it's essentially identical to one of those
+// found in "Divide, Square Root and Remainder" section at
+// http://www.intel.com/software/products/opensource/libraries/num.htm.
+// Yes, I admit that the referred code was used as template,
+// but after I realized that there hardly is any other instruction
+// sequence which would perform this operation. I mean I figure that
+// any independent attempt to implement high-performance division
+// will result in code virtually identical to the Intel code. It
+// should be noted though that below division kernel is 1 cycle
+// faster than Intel one (note commented splits:-), not to mention
+// original prologue (rather lack of one) and epilogue.
+.align	32
+.skip	16
+.L_udiv64_32_b6:
+	frcpa.s1	f8,pred=f6,f7;;		// [0]  y0 = 1 / b
+
+(pred)	fnma.s1		f9=f7,f8,f1		// [5]  e0 = 1 - b * y0
+(pred)	fmpy.s1		f10=f6,f8;;		// [5]  q0 = a * y0
+(pred)	fmpy.s1		f11=f9,f9		// [10] e1 = e0 * e0
+(pred)	fma.s1		f10=f9,f10,f10;;	// [10] q1 = q0 + e0 * q0
+(pred)	fma.s1		f8=f9,f8,f8	//;;	// [15] y1 = y0 + e0 * y0
+(pred)	fma.s1		f9=f11,f10,f10;;	// [15] q2 = q1 + e1 * q1
+(pred)	fma.s1		f8=f11,f8,f8	//;;	// [20] y2 = y1 + e1 * y1
+(pred)	fnma.s1		f10=f7,f9,f6;;		// [20] r2 = a - b * q2
+(pred)	fma.s1		f8=f10,f8,f9;;		// [25] q3 = q2 + r2 * y2
+
+	fcvt.fxu.trunc.s1	f8=f8		// [30] q = trunc(q3)
+	br.ret.sptk.many	b6;;
+.endp	bn_div_words#
+#endif
diff --git a/app/openssl/crypto/bn/asm/mips3-mont.pl b/app/openssl/crypto/bn/asm/mips3-mont.pl
new file mode 100644
index 00000000..8f9156e0
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/mips3-mont.pl
@@ -0,0 +1,327 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# This module doesn't present direct interest for OpenSSL, because it
+# doesn't provide better performance for longer keys. While 512-bit
+# RSA private key operations are 40% faster, 1024-bit ones are hardly
+# faster at all, while longer key operations are slower by up to 20%.
+# It might be of interest to embedded system developers though, as
+# it's smaller than 1KB, yet offers ~3x improvement over compiler
+# generated code.
+#
+# The module targets N32 and N64 MIPS ABIs and currently is a bit
+# IRIX-centric, i.e. is likely to require adaptation for other OSes.
+
+# int bn_mul_mont(
+$rp="a0";	# BN_ULONG *rp,
+$ap="a1";	# const BN_ULONG *ap,
+$bp="a2";	# const BN_ULONG *bp,
+$np="a3";	# const BN_ULONG *np,
+$n0="a4";	# const BN_ULONG *n0,
+$num="a5";	# int num);
+
+$lo0="a6";
+$hi0="a7";
+$lo1="v0";
+$hi1="v1";
+$aj="t0";
+$bi="t1";
+$nj="t2";
+$tp="t3";
+$alo="s0";
+$ahi="s1";
+$nlo="s2";
+$nhi="s3";
+$tj="s4";
+$i="s5";
+$j="s6";
+$fp="t8";
+$m1="t9";
+
+$FRAME=8*(2+8);
+
+$code=<<___;
+#include <asm.h>
+#include <regdef.h>
+
+.text
+
+.set	noat
+.set	reorder
+
+.align	5
+.globl	bn_mul_mont
+.ent	bn_mul_mont
+bn_mul_mont:
+	.set	noreorder
+	PTR_SUB	sp,64
+	move	$fp,sp
+	.frame	$fp,64,ra
+	slt	AT,$num,4
+	li	v0,0
+	beqzl	AT,.Lproceed
+	nop
+	jr	ra
+	PTR_ADD	sp,$fp,64
+	.set	reorder
+.align	5
+.Lproceed:
+	ld	$n0,0($n0)
+	ld	$bi,0($bp)	# bp[0]
+	ld	$aj,0($ap)	# ap[0]
+	ld	$nj,0($np)	# np[0]
+	PTR_SUB	sp,16		# place for two extra words
+	sll	$num,3
+	li	AT,-4096
+	PTR_SUB	sp,$num
+	and	sp,AT
+
+	sd	s0,0($fp)
+	sd	s1,8($fp)
+	sd	s2,16($fp)
+	sd	s3,24($fp)
+	sd	s4,32($fp)
+	sd	s5,40($fp)
+	sd	s6,48($fp)
+	sd	s7,56($fp)
+
+	dmultu	$aj,$bi
+	ld	$alo,8($ap)
+	ld	$nlo,8($np)
+	mflo	$lo0
+	mfhi	$hi0
+	dmultu	$lo0,$n0
+	mflo	$m1
+
+	dmultu	$alo,$bi
+	mflo	$alo
+	mfhi	$ahi
+
+	dmultu	$nj,$m1
+	mflo	$lo1
+	mfhi	$hi1
+	dmultu	$nlo,$m1
+	daddu	$lo1,$lo0
+	sltu	AT,$lo1,$lo0
+	daddu	$hi1,AT
+	mflo	$nlo
+	mfhi	$nhi
+
+	move	$tp,sp
+	li	$j,16
+.align	4
+.L1st:
+	.set	noreorder
+	PTR_ADD	$aj,$ap,$j
+	ld	$aj,($aj)
+	PTR_ADD	$nj,$np,$j
+	ld	$nj,($nj)
+
+	dmultu	$aj,$bi
+	daddu	$lo0,$alo,$hi0
+	daddu	$lo1,$nlo,$hi1
+	sltu	AT,$lo0,$hi0
+	sltu	s7,$lo1,$hi1
+	daddu	$hi0,$ahi,AT
+	daddu	$hi1,$nhi,s7
+	mflo	$alo
+	mfhi	$ahi
+
+	daddu	$lo1,$lo0
+	sltu	AT,$lo1,$lo0
+	dmultu	$nj,$m1
+	daddu	$hi1,AT
+	addu	$j,8
+	sd	$lo1,($tp)
+	sltu	s7,$j,$num
+	mflo	$nlo
+	mfhi	$nhi
+
+	bnez	s7,.L1st
+	PTR_ADD	$tp,8
+	.set	reorder
+
+	daddu	$lo0,$alo,$hi0
+	sltu	AT,$lo0,$hi0
+	daddu	$hi0,$ahi,AT
+
+	daddu	$lo1,$nlo,$hi1
+	sltu	s7,$lo1,$hi1
+	daddu	$hi1,$nhi,s7
+	daddu	$lo1,$lo0
+	sltu	AT,$lo1,$lo0
+	daddu	$hi1,AT
+
+	sd	$lo1,($tp)
+
+	daddu	$hi1,$hi0
+	sltu	AT,$hi1,$hi0
+	sd	$hi1,8($tp)
+	sd	AT,16($tp)
+
+	li	$i,8
+.align	4
+.Louter:
+	PTR_ADD	$bi,$bp,$i
+	ld	$bi,($bi)
+	ld	$aj,($ap)
+	ld	$alo,8($ap)
+	ld	$tj,(sp)
+
+	dmultu	$aj,$bi
+	ld	$nj,($np)
+	ld	$nlo,8($np)
+	mflo	$lo0
+	mfhi	$hi0
+	daddu	$lo0,$tj
+	dmultu	$lo0,$n0
+	sltu	AT,$lo0,$tj
+	daddu	$hi0,AT
+	mflo	$m1
+
+	dmultu	$alo,$bi
+	mflo	$alo
+	mfhi	$ahi
+
+	dmultu	$nj,$m1
+	mflo	$lo1
+	mfhi	$hi1
+
+	dmultu	$nlo,$m1
+	daddu	$lo1,$lo0
+	sltu	AT,$lo1,$lo0
+	daddu	$hi1,AT
+	mflo	$nlo
+	mfhi	$nhi
+
+	move	$tp,sp
+	li	$j,16
+	ld	$tj,8($tp)
+.align	4
+.Linner:
+	.set	noreorder
+	PTR_ADD	$aj,$ap,$j
+	ld	$aj,($aj)
+	PTR_ADD	$nj,$np,$j
+	ld	$nj,($nj)
+
+	dmultu	$aj,$bi
+	daddu	$lo0,$alo,$hi0
+	daddu	$lo1,$nlo,$hi1
+	sltu	AT,$lo0,$hi0
+	sltu	s7,$lo1,$hi1
+	daddu	$hi0,$ahi,AT
+	daddu	$hi1,$nhi,s7
+	mflo	$alo
+	mfhi	$ahi
+
+	daddu	$lo0,$tj
+	addu	$j,8
+	dmultu	$nj,$m1
+	sltu	AT,$lo0,$tj
+	daddu	$lo1,$lo0
+	daddu	$hi0,AT
+	sltu	s7,$lo1,$lo0
+	ld	$tj,16($tp)
+	daddu	$hi1,s7
+	sltu	AT,$j,$num
+	mflo	$nlo
+	mfhi	$nhi
+	sd	$lo1,($tp)
+	bnez	AT,.Linner
+	PTR_ADD	$tp,8
+	.set	reorder
+
+	daddu	$lo0,$alo,$hi0
+	sltu	AT,$lo0,$hi0
+	daddu	$hi0,$ahi,AT
+	daddu	$lo0,$tj
+	sltu	s7,$lo0,$tj
+	daddu	$hi0,s7
+
+	ld	$tj,16($tp)
+	daddu	$lo1,$nlo,$hi1
+	sltu	AT,$lo1,$hi1
+	daddu	$hi1,$nhi,AT
+	daddu	$lo1,$lo0
+	sltu	s7,$lo1,$lo0
+	daddu	$hi1,s7
+	sd	$lo1,($tp)
+
+	daddu	$lo1,$hi1,$hi0
+	sltu	$hi1,$lo1,$hi0
+	daddu	$lo1,$tj
+	sltu	AT,$lo1,$tj
+	daddu	$hi1,AT
+	sd	$lo1,8($tp)
+	sd	$hi1,16($tp)
+
+	addu	$i,8
+	sltu	s7,$i,$num
+	bnez	s7,.Louter
+
+	.set	noreorder
+	PTR_ADD	$tj,sp,$num	# &tp[num]
+	move	$tp,sp
+	move	$ap,sp
+	li	$hi0,0		# clear borrow bit
+
+.align	4
+.Lsub:	ld	$lo0,($tp)
+	ld	$lo1,($np)
+	PTR_ADD	$tp,8
+	PTR_ADD	$np,8
+	dsubu	$lo1,$lo0,$lo1	# tp[i]-np[i]
+	sgtu	AT,$lo1,$lo0
+	dsubu	$lo0,$lo1,$hi0
+	sgtu	$hi0,$lo0,$lo1
+	sd	$lo0,($rp)
+	or	$hi0,AT
+	sltu	AT,$tp,$tj
+	bnez	AT,.Lsub
+	PTR_ADD	$rp,8
+
+	dsubu	$hi0,$hi1,$hi0	# handle upmost overflow bit
+	move	$tp,sp
+	PTR_SUB	$rp,$num	# restore rp
+	not	$hi1,$hi0
+
+	and	$ap,$hi0,sp
+	and	$bp,$hi1,$rp
+	or	$ap,$ap,$bp	# ap=borrow?tp:rp
+
+.align	4
+.Lcopy:	ld	$aj,($ap)
+	PTR_ADD	$ap,8
+	PTR_ADD	$tp,8
+	sd	zero,-8($tp)
+	sltu	AT,$tp,$tj
+	sd	$aj,($rp)
+	bnez	AT,.Lcopy
+	PTR_ADD	$rp,8
+
+	ld	s0,0($fp)
+	ld	s1,8($fp)
+	ld	s2,16($fp)
+	ld	s3,24($fp)
+	ld	s4,32($fp)
+	ld	s5,40($fp)
+	ld	s6,48($fp)
+	ld	s7,56($fp)
+	li	v0,1
+	jr	ra
+	PTR_ADD	sp,$fp,64
+	.set	reorder
+END(bn_mul_mont)
+.rdata
+.asciiz	"Montgomery Multiplication for MIPS III/IV, CRYPTOGAMS by <appro\@openssl.org>"
+___
+
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/mips3.s b/app/openssl/crypto/bn/asm/mips3.s
new file mode 100644
index 00000000..dca4105c
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/mips3.s
@@ -0,0 +1,2201 @@
+.rdata
+.asciiz	"mips3.s, Version 1.1"
+.asciiz	"MIPS III/IV ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+
+/*
+ * ====================================================================
+ * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+ * project.
+ *
+ * Rights for redistribution and usage in source and binary forms are
+ * granted according to the OpenSSL license. Warranty of any kind is
+ * disclaimed.
+ * ====================================================================
+ */
+
+/*
+ * This is my modest contributon to the OpenSSL project (see
+ * http://www.openssl.org/ for more information about it) and is
+ * a drop-in MIPS III/IV ISA replacement for crypto/bn/bn_asm.c
+ * module. For updates see http://fy.chalmers.se/~appro/hpe/.
+ *
+ * The module is designed to work with either of the "new" MIPS ABI(5),
+ * namely N32 or N64, offered by IRIX 6.x. It's not ment to work under
+ * IRIX 5.x not only because it doesn't support new ABIs but also
+ * because 5.x kernels put R4x00 CPU into 32-bit mode and all those
+ * 64-bit instructions (daddu, dmultu, etc.) found below gonna only
+ * cause illegal instruction exception:-(
+ *
+ * In addition the code depends on preprocessor flags set up by MIPSpro
+ * compiler driver (either as or cc) and therefore (probably?) can't be
+ * compiled by the GNU assembler. GNU C driver manages fine though...
+ * I mean as long as -mmips-as is specified or is the default option,
+ * because then it simply invokes /usr/bin/as which in turn takes
+ * perfect care of the preprocessor definitions. Another neat feature
+ * offered by the MIPSpro assembler is an optimization pass. This gave
+ * me the opportunity to have the code looking more regular as all those
+ * architecture dependent instruction rescheduling details were left to
+ * the assembler. Cool, huh?
+ *
+ * Performance improvement is astonishing! 'apps/openssl speed rsa dsa'
+ * goes way over 3 times faster!
+ *
+ *					<appro@fy.chalmers.se>
+ */
+#include <asm.h>
+#include <regdef.h>
+
+#if _MIPS_ISA>=4
+#define	MOVNZ(cond,dst,src)	\
+	movn	dst,src,cond
+#else
+#define	MOVNZ(cond,dst,src)	\
+	.set	noreorder;	\
+	bnezl	cond,.+8;	\
+	move	dst,src;	\
+	.set	reorder
+#endif
+
+.text
+
+.set	noat
+.set	reorder
+
+#define	MINUS4	v1
+
+.align	5
+LEAF(bn_mul_add_words)
+	.set	noreorder
+	bgtzl	a2,.L_bn_mul_add_words_proceed
+	ld	t0,0(a1)
+	jr	ra
+	move	v0,zero
+	.set	reorder
+
+.L_bn_mul_add_words_proceed:
+	li	MINUS4,-4
+	and	ta0,a2,MINUS4
+	move	v0,zero
+	beqz	ta0,.L_bn_mul_add_words_tail
+
+.L_bn_mul_add_words_loop:
+	dmultu	t0,a3
+	ld	t1,0(a0)
+	ld	t2,8(a1)
+	ld	t3,8(a0)
+	ld	ta0,16(a1)
+	ld	ta1,16(a0)
+	daddu	t1,v0
+	sltu	v0,t1,v0	/* All manuals say it "compares 32-bit
+				 * values", but it seems to work fine
+				 * even on 64-bit registers. */
+	mflo	AT
+	mfhi	t0
+	daddu	t1,AT
+	daddu	v0,t0
+	sltu	AT,t1,AT
+	sd	t1,0(a0)
+	daddu	v0,AT
+
+	dmultu	t2,a3
+	ld	ta2,24(a1)
+	ld	ta3,24(a0)
+	daddu	t3,v0
+	sltu	v0,t3,v0
+	mflo	AT
+	mfhi	t2
+	daddu	t3,AT
+	daddu	v0,t2
+	sltu	AT,t3,AT
+	sd	t3,8(a0)
+	daddu	v0,AT
+
+	dmultu	ta0,a3
+	subu	a2,4
+	PTR_ADD	a0,32
+	PTR_ADD	a1,32
+	daddu	ta1,v0
+	sltu	v0,ta1,v0
+	mflo	AT
+	mfhi	ta0
+	daddu	ta1,AT
+	daddu	v0,ta0
+	sltu	AT,ta1,AT
+	sd	ta1,-16(a0)
+	daddu	v0,AT
+
+
+	dmultu	ta2,a3
+	and	ta0,a2,MINUS4
+	daddu	ta3,v0
+	sltu	v0,ta3,v0
+	mflo	AT
+	mfhi	ta2
+	daddu	ta3,AT
+	daddu	v0,ta2
+	sltu	AT,ta3,AT
+	sd	ta3,-8(a0)
+	daddu	v0,AT
+	.set	noreorder
+	bgtzl	ta0,.L_bn_mul_add_words_loop
+	ld	t0,0(a1)
+
+	bnezl	a2,.L_bn_mul_add_words_tail
+	ld	t0,0(a1)
+	.set	reorder
+
+.L_bn_mul_add_words_return:
+	jr	ra
+
+.L_bn_mul_add_words_tail:
+	dmultu	t0,a3
+	ld	t1,0(a0)
+	subu	a2,1
+	daddu	t1,v0
+	sltu	v0,t1,v0
+	mflo	AT
+	mfhi	t0
+	daddu	t1,AT
+	daddu	v0,t0
+	sltu	AT,t1,AT
+	sd	t1,0(a0)
+	daddu	v0,AT
+	beqz	a2,.L_bn_mul_add_words_return
+
+	ld	t0,8(a1)
+	dmultu	t0,a3
+	ld	t1,8(a0)
+	subu	a2,1
+	daddu	t1,v0
+	sltu	v0,t1,v0
+	mflo	AT
+	mfhi	t0
+	daddu	t1,AT
+	daddu	v0,t0
+	sltu	AT,t1,AT
+	sd	t1,8(a0)
+	daddu	v0,AT
+	beqz	a2,.L_bn_mul_add_words_return
+
+	ld	t0,16(a1)
+	dmultu	t0,a3
+	ld	t1,16(a0)
+	daddu	t1,v0
+	sltu	v0,t1,v0
+	mflo	AT
+	mfhi	t0
+	daddu	t1,AT
+	daddu	v0,t0
+	sltu	AT,t1,AT
+	sd	t1,16(a0)
+	daddu	v0,AT
+	jr	ra
+END(bn_mul_add_words)
+
+.align	5
+LEAF(bn_mul_words)
+	.set	noreorder
+	bgtzl	a2,.L_bn_mul_words_proceed
+	ld	t0,0(a1)
+	jr	ra
+	move	v0,zero
+	.set	reorder
+
+.L_bn_mul_words_proceed:
+	li	MINUS4,-4
+	and	ta0,a2,MINUS4
+	move	v0,zero
+	beqz	ta0,.L_bn_mul_words_tail
+
+.L_bn_mul_words_loop:
+	dmultu	t0,a3
+	ld	t2,8(a1)
+	ld	ta0,16(a1)
+	ld	ta2,24(a1)
+	mflo	AT
+	mfhi	t0
+	daddu	v0,AT
+	sltu	t1,v0,AT
+	sd	v0,0(a0)
+	daddu	v0,t1,t0
+
+	dmultu	t2,a3
+	subu	a2,4
+	PTR_ADD	a0,32
+	PTR_ADD	a1,32
+	mflo	AT
+	mfhi	t2
+	daddu	v0,AT
+	sltu	t3,v0,AT
+	sd	v0,-24(a0)
+	daddu	v0,t3,t2
+
+	dmultu	ta0,a3
+	mflo	AT
+	mfhi	ta0
+	daddu	v0,AT
+	sltu	ta1,v0,AT
+	sd	v0,-16(a0)
+	daddu	v0,ta1,ta0
+
+
+	dmultu	ta2,a3
+	and	ta0,a2,MINUS4
+	mflo	AT
+	mfhi	ta2
+	daddu	v0,AT
+	sltu	ta3,v0,AT
+	sd	v0,-8(a0)
+	daddu	v0,ta3,ta2
+	.set	noreorder
+	bgtzl	ta0,.L_bn_mul_words_loop
+	ld	t0,0(a1)
+
+	bnezl	a2,.L_bn_mul_words_tail
+	ld	t0,0(a1)
+	.set	reorder
+
+.L_bn_mul_words_return:
+	jr	ra
+
+.L_bn_mul_words_tail:
+	dmultu	t0,a3
+	subu	a2,1
+	mflo	AT
+	mfhi	t0
+	daddu	v0,AT
+	sltu	t1,v0,AT
+	sd	v0,0(a0)
+	daddu	v0,t1,t0
+	beqz	a2,.L_bn_mul_words_return
+
+	ld	t0,8(a1)
+	dmultu	t0,a3
+	subu	a2,1
+	mflo	AT
+	mfhi	t0
+	daddu	v0,AT
+	sltu	t1,v0,AT
+	sd	v0,8(a0)
+	daddu	v0,t1,t0
+	beqz	a2,.L_bn_mul_words_return
+
+	ld	t0,16(a1)
+	dmultu	t0,a3
+	mflo	AT
+	mfhi	t0
+	daddu	v0,AT
+	sltu	t1,v0,AT
+	sd	v0,16(a0)
+	daddu	v0,t1,t0
+	jr	ra
+END(bn_mul_words)
+
+.align	5
+LEAF(bn_sqr_words)
+	.set	noreorder
+	bgtzl	a2,.L_bn_sqr_words_proceed
+	ld	t0,0(a1)
+	jr	ra
+	move	v0,zero
+	.set	reorder
+
+.L_bn_sqr_words_proceed:
+	li	MINUS4,-4
+	and	ta0,a2,MINUS4
+	move	v0,zero
+	beqz	ta0,.L_bn_sqr_words_tail
+
+.L_bn_sqr_words_loop:
+	dmultu	t0,t0
+	ld	t2,8(a1)
+	ld	ta0,16(a1)
+	ld	ta2,24(a1)
+	mflo	t1
+	mfhi	t0
+	sd	t1,0(a0)
+	sd	t0,8(a0)
+
+	dmultu	t2,t2
+	subu	a2,4
+	PTR_ADD	a0,64
+	PTR_ADD	a1,32
+	mflo	t3
+	mfhi	t2
+	sd	t3,-48(a0)
+	sd	t2,-40(a0)
+
+	dmultu	ta0,ta0
+	mflo	ta1
+	mfhi	ta0
+	sd	ta1,-32(a0)
+	sd	ta0,-24(a0)
+
+
+	dmultu	ta2,ta2
+	and	ta0,a2,MINUS4
+	mflo	ta3
+	mfhi	ta2
+	sd	ta3,-16(a0)
+	sd	ta2,-8(a0)
+
+	.set	noreorder
+	bgtzl	ta0,.L_bn_sqr_words_loop
+	ld	t0,0(a1)
+
+	bnezl	a2,.L_bn_sqr_words_tail
+	ld	t0,0(a1)
+	.set	reorder
+
+.L_bn_sqr_words_return:
+	move	v0,zero
+	jr	ra
+
+.L_bn_sqr_words_tail:
+	dmultu	t0,t0
+	subu	a2,1
+	mflo	t1
+	mfhi	t0
+	sd	t1,0(a0)
+	sd	t0,8(a0)
+	beqz	a2,.L_bn_sqr_words_return
+
+	ld	t0,8(a1)
+	dmultu	t0,t0
+	subu	a2,1
+	mflo	t1
+	mfhi	t0
+	sd	t1,16(a0)
+	sd	t0,24(a0)
+	beqz	a2,.L_bn_sqr_words_return
+
+	ld	t0,16(a1)
+	dmultu	t0,t0
+	mflo	t1
+	mfhi	t0
+	sd	t1,32(a0)
+	sd	t0,40(a0)
+	jr	ra
+END(bn_sqr_words)
+
+.align	5
+LEAF(bn_add_words)
+	.set	noreorder
+	bgtzl	a3,.L_bn_add_words_proceed
+	ld	t0,0(a1)
+	jr	ra
+	move	v0,zero
+	.set	reorder
+
+.L_bn_add_words_proceed:
+	li	MINUS4,-4
+	and	AT,a3,MINUS4
+	move	v0,zero
+	beqz	AT,.L_bn_add_words_tail
+
+.L_bn_add_words_loop:
+	ld	ta0,0(a2)
+	subu	a3,4
+	ld	t1,8(a1)
+	and	AT,a3,MINUS4
+	ld	t2,16(a1)
+	PTR_ADD	a2,32
+	ld	t3,24(a1)
+	PTR_ADD	a0,32
+	ld	ta1,-24(a2)
+	PTR_ADD	a1,32
+	ld	ta2,-16(a2)
+	ld	ta3,-8(a2)
+	daddu	ta0,t0
+	sltu	t8,ta0,t0
+	daddu	t0,ta0,v0
+	sltu	v0,t0,ta0
+	sd	t0,-32(a0)
+	daddu	v0,t8
+
+	daddu	ta1,t1
+	sltu	t9,ta1,t1
+	daddu	t1,ta1,v0
+	sltu	v0,t1,ta1
+	sd	t1,-24(a0)
+	daddu	v0,t9
+
+	daddu	ta2,t2
+	sltu	t8,ta2,t2
+	daddu	t2,ta2,v0
+	sltu	v0,t2,ta2
+	sd	t2,-16(a0)
+	daddu	v0,t8
+	
+	daddu	ta3,t3
+	sltu	t9,ta3,t3
+	daddu	t3,ta3,v0
+	sltu	v0,t3,ta3
+	sd	t3,-8(a0)
+	daddu	v0,t9
+	
+	.set	noreorder
+	bgtzl	AT,.L_bn_add_words_loop
+	ld	t0,0(a1)
+
+	bnezl	a3,.L_bn_add_words_tail
+	ld	t0,0(a1)
+	.set	reorder
+
+.L_bn_add_words_return:
+	jr	ra
+
+.L_bn_add_words_tail:
+	ld	ta0,0(a2)
+	daddu	ta0,t0
+	subu	a3,1
+	sltu	t8,ta0,t0
+	daddu	t0,ta0,v0
+	sltu	v0,t0,ta0
+	sd	t0,0(a0)
+	daddu	v0,t8
+	beqz	a3,.L_bn_add_words_return
+
+	ld	t1,8(a1)
+	ld	ta1,8(a2)
+	daddu	ta1,t1
+	subu	a3,1
+	sltu	t9,ta1,t1
+	daddu	t1,ta1,v0
+	sltu	v0,t1,ta1
+	sd	t1,8(a0)
+	daddu	v0,t9
+	beqz	a3,.L_bn_add_words_return
+
+	ld	t2,16(a1)
+	ld	ta2,16(a2)
+	daddu	ta2,t2
+	sltu	t8,ta2,t2
+	daddu	t2,ta2,v0
+	sltu	v0,t2,ta2
+	sd	t2,16(a0)
+	daddu	v0,t8
+	jr	ra
+END(bn_add_words)
+
+.align	5
+LEAF(bn_sub_words)
+	.set	noreorder
+	bgtzl	a3,.L_bn_sub_words_proceed
+	ld	t0,0(a1)
+	jr	ra
+	move	v0,zero
+	.set	reorder
+
+.L_bn_sub_words_proceed:
+	li	MINUS4,-4
+	and	AT,a3,MINUS4
+	move	v0,zero
+	beqz	AT,.L_bn_sub_words_tail
+
+.L_bn_sub_words_loop:
+	ld	ta0,0(a2)
+	subu	a3,4
+	ld	t1,8(a1)
+	and	AT,a3,MINUS4
+	ld	t2,16(a1)
+	PTR_ADD	a2,32
+	ld	t3,24(a1)
+	PTR_ADD	a0,32
+	ld	ta1,-24(a2)
+	PTR_ADD	a1,32
+	ld	ta2,-16(a2)
+	ld	ta3,-8(a2)
+	sltu	t8,t0,ta0
+	dsubu	t0,ta0
+	dsubu	ta0,t0,v0
+	sd	ta0,-32(a0)
+	MOVNZ	(t0,v0,t8)
+
+	sltu	t9,t1,ta1
+	dsubu	t1,ta1
+	dsubu	ta1,t1,v0
+	sd	ta1,-24(a0)
+	MOVNZ	(t1,v0,t9)
+
+
+	sltu	t8,t2,ta2
+	dsubu	t2,ta2
+	dsubu	ta2,t2,v0
+	sd	ta2,-16(a0)
+	MOVNZ	(t2,v0,t8)
+
+	sltu	t9,t3,ta3
+	dsubu	t3,ta3
+	dsubu	ta3,t3,v0
+	sd	ta3,-8(a0)
+	MOVNZ	(t3,v0,t9)
+
+	.set	noreorder
+	bgtzl	AT,.L_bn_sub_words_loop
+	ld	t0,0(a1)
+
+	bnezl	a3,.L_bn_sub_words_tail
+	ld	t0,0(a1)
+	.set	reorder
+
+.L_bn_sub_words_return:
+	jr	ra
+
+.L_bn_sub_words_tail:
+	ld	ta0,0(a2)
+	subu	a3,1
+	sltu	t8,t0,ta0
+	dsubu	t0,ta0
+	dsubu	ta0,t0,v0
+	MOVNZ	(t0,v0,t8)
+	sd	ta0,0(a0)
+	beqz	a3,.L_bn_sub_words_return
+
+	ld	t1,8(a1)
+	subu	a3,1
+	ld	ta1,8(a2)
+	sltu	t9,t1,ta1
+	dsubu	t1,ta1
+	dsubu	ta1,t1,v0
+	MOVNZ	(t1,v0,t9)
+	sd	ta1,8(a0)
+	beqz	a3,.L_bn_sub_words_return
+
+	ld	t2,16(a1)
+	ld	ta2,16(a2)
+	sltu	t8,t2,ta2
+	dsubu	t2,ta2
+	dsubu	ta2,t2,v0
+	MOVNZ	(t2,v0,t8)
+	sd	ta2,16(a0)
+	jr	ra
+END(bn_sub_words)
+
+#undef	MINUS4
+
+.align 5
+LEAF(bn_div_3_words)
+	.set	reorder
+	move	a3,a0		/* we know that bn_div_words doesn't
+				 * touch a3, ta2, ta3 and preserves a2
+				 * so that we can save two arguments
+				 * and return address in registers
+				 * instead of stack:-)
+				 */
+	ld	a0,(a3)
+	move	ta2,a1
+	ld	a1,-8(a3)
+	bne	a0,a2,.L_bn_div_3_words_proceed
+	li	v0,-1
+	jr	ra
+.L_bn_div_3_words_proceed:
+	move	ta3,ra
+	bal	bn_div_words
+	move	ra,ta3
+	dmultu	ta2,v0
+	ld	t2,-16(a3)
+	move	ta0,zero
+	mfhi	t1
+	mflo	t0
+	sltu	t8,t1,v1
+.L_bn_div_3_words_inner_loop:
+	bnez	t8,.L_bn_div_3_words_inner_loop_done
+	sgeu	AT,t2,t0
+	seq	t9,t1,v1
+	and	AT,t9
+	sltu	t3,t0,ta2
+	daddu	v1,a2
+	dsubu	t1,t3
+	dsubu	t0,ta2
+	sltu	t8,t1,v1
+	sltu	ta0,v1,a2
+	or	t8,ta0
+	.set	noreorder
+	beqzl	AT,.L_bn_div_3_words_inner_loop
+	dsubu	v0,1
+	.set	reorder
+.L_bn_div_3_words_inner_loop_done:
+	jr	ra
+END(bn_div_3_words)
+
+.align	5
+LEAF(bn_div_words)
+	.set	noreorder
+	bnezl	a2,.L_bn_div_words_proceed
+	move	v1,zero
+	jr	ra
+	li	v0,-1		/* I'd rather signal div-by-zero
+				 * which can be done with 'break 7' */
+
+.L_bn_div_words_proceed:
+	bltz	a2,.L_bn_div_words_body
+	move	t9,v1
+	dsll	a2,1
+	bgtz	a2,.-4
+	addu	t9,1
+
+	.set	reorder
+	negu	t1,t9
+	li	t2,-1
+	dsll	t2,t1
+	and	t2,a0
+	dsrl	AT,a1,t1
+	.set	noreorder
+	bnezl	t2,.+8
+	break	6		/* signal overflow */
+	.set	reorder
+	dsll	a0,t9
+	dsll	a1,t9
+	or	a0,AT
+
+#define	QT	ta0
+#define	HH	ta1
+#define	DH	v1
+.L_bn_div_words_body:
+	dsrl	DH,a2,32
+	sgeu	AT,a0,a2
+	.set	noreorder
+	bnezl	AT,.+8
+	dsubu	a0,a2
+	.set	reorder
+
+	li	QT,-1
+	dsrl	HH,a0,32
+	dsrl	QT,32	/* q=0xffffffff */
+	beq	DH,HH,.L_bn_div_words_skip_div1
+	ddivu	zero,a0,DH
+	mflo	QT
+.L_bn_div_words_skip_div1:
+	dmultu	a2,QT
+	dsll	t3,a0,32
+	dsrl	AT,a1,32
+	or	t3,AT
+	mflo	t0
+	mfhi	t1
+.L_bn_div_words_inner_loop1:
+	sltu	t2,t3,t0
+	seq	t8,HH,t1
+	sltu	AT,HH,t1
+	and	t2,t8
+	sltu	v0,t0,a2
+	or	AT,t2
+	.set	noreorder
+	beqz	AT,.L_bn_div_words_inner_loop1_done
+	dsubu	t1,v0
+	dsubu	t0,a2
+	b	.L_bn_div_words_inner_loop1
+	dsubu	QT,1
+	.set	reorder
+.L_bn_div_words_inner_loop1_done:
+
+	dsll	a1,32
+	dsubu	a0,t3,t0
+	dsll	v0,QT,32
+
+	li	QT,-1
+	dsrl	HH,a0,32
+	dsrl	QT,32	/* q=0xffffffff */
+	beq	DH,HH,.L_bn_div_words_skip_div2
+	ddivu	zero,a0,DH
+	mflo	QT
+.L_bn_div_words_skip_div2:
+#undef	DH
+	dmultu	a2,QT
+	dsll	t3,a0,32
+	dsrl	AT,a1,32
+	or	t3,AT
+	mflo	t0
+	mfhi	t1
+.L_bn_div_words_inner_loop2:
+	sltu	t2,t3,t0
+	seq	t8,HH,t1
+	sltu	AT,HH,t1
+	and	t2,t8
+	sltu	v1,t0,a2
+	or	AT,t2
+	.set	noreorder
+	beqz	AT,.L_bn_div_words_inner_loop2_done
+	dsubu	t1,v1
+	dsubu	t0,a2
+	b	.L_bn_div_words_inner_loop2
+	dsubu	QT,1
+	.set	reorder
+.L_bn_div_words_inner_loop2_done:	
+#undef	HH
+
+	dsubu	a0,t3,t0
+	or	v0,QT
+	dsrl	v1,a0,t9	/* v1 contains remainder if anybody wants it */
+	dsrl	a2,t9		/* restore a2 */
+	jr	ra
+#undef	QT
+END(bn_div_words)
+
+#define	a_0	t0
+#define	a_1	t1
+#define	a_2	t2
+#define	a_3	t3
+#define	b_0	ta0
+#define	b_1	ta1
+#define	b_2	ta2
+#define	b_3	ta3
+
+#define	a_4	s0
+#define	a_5	s2
+#define	a_6	s4
+#define	a_7	a1	/* once we load a[7] we don't need a anymore */
+#define	b_4	s1
+#define	b_5	s3
+#define	b_6	s5
+#define	b_7	a2	/* once we load b[7] we don't need b anymore */
+
+#define	t_1	t8
+#define	t_2	t9
+
+#define	c_1	v0
+#define	c_2	v1
+#define	c_3	a3
+
+#define	FRAME_SIZE	48
+
+.align	5
+LEAF(bn_mul_comba8)
+	.set	noreorder
+	PTR_SUB	sp,FRAME_SIZE
+	.frame	sp,64,ra
+	.set	reorder
+	ld	a_0,0(a1)	/* If compiled with -mips3 option on
+				 * R5000 box assembler barks on this
+				 * line with "shouldn't have mult/div
+				 * as last instruction in bb (R10K
+				 * bug)" warning. If anybody out there
+				 * has a clue about how to circumvent
+				 * this do send me a note.
+				 *		<appro@fy.chalmers.se>
+				 */
+	ld	b_0,0(a2)
+	ld	a_1,8(a1)
+	ld	a_2,16(a1)
+	ld	a_3,24(a1)
+	ld	b_1,8(a2)
+	ld	b_2,16(a2)
+	ld	b_3,24(a2)
+	dmultu	a_0,b_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
+	sd	s0,0(sp)
+	sd	s1,8(sp)
+	sd	s2,16(sp)
+	sd	s3,24(sp)
+	sd	s4,32(sp)
+	sd	s5,40(sp)
+	mflo	c_1
+	mfhi	c_2
+
+	dmultu	a_0,b_1		/* mul_add_c(a[0],b[1],c2,c3,c1); */
+	ld	a_4,32(a1)
+	ld	a_5,40(a1)
+	ld	a_6,48(a1)
+	ld	a_7,56(a1)
+	ld	b_4,32(a2)
+	ld	b_5,40(a2)
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	c_3,t_2,AT
+	dmultu	a_1,b_0		/* mul_add_c(a[1],b[0],c2,c3,c1); */
+	ld	b_6,48(a2)
+	ld	b_7,56(a2)
+	sd	c_1,0(a0)	/* r[0]=c1; */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
+	sd	c_2,8(a0)	/* r[1]=c2; */
+
+	dmultu	a_2,b_0		/* mul_add_c(a[2],b[0],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	dmultu	a_1,b_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
+	dmultu	a_0,b_2		/* mul_add_c(a[0],b[2],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,16(a0)	/* r[2]=c3; */
+
+	dmultu	a_0,b_3		/* mul_add_c(a[0],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
+	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_3,b_0		/* mul_add_c(a[3],b[0],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,24(a0)	/* r[3]=c1; */
+
+	dmultu	a_4,b_0		/* mul_add_c(a[4],b[0],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
+	dmultu	a_3,b_1		/* mul_add_c(a[3],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_1,b_3		/* mul_add_c(a[1],b[3],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_0,b_4		/* mul_add_c(a[0],b[4],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,32(a0)	/* r[4]=c2; */
+
+	dmultu	a_0,b_5		/* mul_add_c(a[0],b[5],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
+	dmultu	a_1,b_4		/* mul_add_c(a[1],b[4],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_2,b_3		/* mul_add_c(a[2],b[3],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_3,b_2		/* mul_add_c(a[3],b[2],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_4,b_1		/* mul_add_c(a[4],b[1],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_5,b_0		/* mul_add_c(a[5],b[0],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,40(a0)	/* r[5]=c3; */
+
+	dmultu	a_6,b_0		/* mul_add_c(a[6],b[0],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
+	dmultu	a_5,b_1		/* mul_add_c(a[5],b[1],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_4,b_2		/* mul_add_c(a[4],b[2],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_3,b_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_2,b_4		/* mul_add_c(a[2],b[4],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_1,b_5		/* mul_add_c(a[1],b[5],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_0,b_6		/* mul_add_c(a[0],b[6],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,48(a0)	/* r[6]=c1; */
+
+	dmultu	a_0,b_7		/* mul_add_c(a[0],b[7],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
+	dmultu	a_1,b_6		/* mul_add_c(a[1],b[6],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_2,b_5		/* mul_add_c(a[2],b[5],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_3,b_4		/* mul_add_c(a[3],b[4],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_4,b_3		/* mul_add_c(a[4],b[3],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_5,b_2		/* mul_add_c(a[5],b[2],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_6,b_1		/* mul_add_c(a[6],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_7,b_0		/* mul_add_c(a[7],b[0],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,56(a0)	/* r[7]=c2; */
+
+	dmultu	a_7,b_1		/* mul_add_c(a[7],b[1],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
+	dmultu	a_6,b_2		/* mul_add_c(a[6],b[2],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_5,b_3		/* mul_add_c(a[5],b[3],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_4,b_4		/* mul_add_c(a[4],b[4],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_3,b_5		/* mul_add_c(a[3],b[5],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_2,b_6		/* mul_add_c(a[2],b[6],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_1,b_7		/* mul_add_c(a[1],b[7],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,64(a0)	/* r[8]=c3; */
+
+	dmultu	a_2,b_7		/* mul_add_c(a[2],b[7],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
+	dmultu	a_3,b_6		/* mul_add_c(a[3],b[6],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_4,b_5		/* mul_add_c(a[4],b[5],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_5,b_4		/* mul_add_c(a[5],b[4],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_6,b_3		/* mul_add_c(a[6],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_7,b_2		/* mul_add_c(a[7],b[2],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,72(a0)	/* r[9]=c1; */
+
+	dmultu	a_7,b_3		/* mul_add_c(a[7],b[3],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
+	dmultu	a_6,b_4		/* mul_add_c(a[6],b[4],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_5,b_5		/* mul_add_c(a[5],b[5],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_4,b_6		/* mul_add_c(a[4],b[6],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_3,b_7		/* mul_add_c(a[3],b[7],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,80(a0)	/* r[10]=c2; */
+
+	dmultu	a_4,b_7		/* mul_add_c(a[4],b[7],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
+	dmultu	a_5,b_6		/* mul_add_c(a[5],b[6],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_6,b_5		/* mul_add_c(a[6],b[5],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_7,b_4		/* mul_add_c(a[7],b[4],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,88(a0)	/* r[11]=c3; */
+
+	dmultu	a_7,b_5		/* mul_add_c(a[7],b[5],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
+	dmultu	a_6,b_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_5,b_7		/* mul_add_c(a[5],b[7],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,96(a0)	/* r[12]=c1; */
+
+	dmultu	a_6,b_7		/* mul_add_c(a[6],b[7],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
+	dmultu	a_7,b_6		/* mul_add_c(a[7],b[6],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,104(a0)	/* r[13]=c2; */
+
+	dmultu	a_7,b_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
+	ld	s0,0(sp)
+	ld	s1,8(sp)
+	ld	s2,16(sp)
+	ld	s3,24(sp)
+	ld	s4,32(sp)
+	ld	s5,40(sp)
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sd	c_3,112(a0)	/* r[14]=c3; */
+	sd	c_1,120(a0)	/* r[15]=c1; */
+
+	PTR_ADD	sp,FRAME_SIZE
+
+	jr	ra
+END(bn_mul_comba8)
+
+.align	5
+LEAF(bn_mul_comba4)
+	.set	reorder
+	ld	a_0,0(a1)
+	ld	b_0,0(a2)
+	ld	a_1,8(a1)
+	ld	a_2,16(a1)
+	dmultu	a_0,b_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
+	ld	a_3,24(a1)
+	ld	b_1,8(a2)
+	ld	b_2,16(a2)
+	ld	b_3,24(a2)
+	mflo	c_1
+	mfhi	c_2
+	sd	c_1,0(a0)
+
+	dmultu	a_0,b_1		/* mul_add_c(a[0],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	c_3,t_2,AT
+	dmultu	a_1,b_0		/* mul_add_c(a[1],b[0],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
+	sd	c_2,8(a0)
+
+	dmultu	a_2,b_0		/* mul_add_c(a[2],b[0],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	dmultu	a_1,b_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
+	dmultu	a_0,b_2		/* mul_add_c(a[0],b[2],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,16(a0)
+
+	dmultu	a_0,b_3		/* mul_add_c(a[0],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
+	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_3,b_0		/* mul_add_c(a[3],b[0],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,24(a0)
+
+	dmultu	a_3,b_1		/* mul_add_c(a[3],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
+	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_1,b_3		/* mul_add_c(a[1],b[3],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,32(a0)
+
+	dmultu	a_2,b_3		/* mul_add_c(a[2],b[3],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
+	dmultu	a_3,b_2		/* mul_add_c(a[3],b[2],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,40(a0)
+
+	dmultu	a_3,b_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sd	c_1,48(a0)
+	sd	c_2,56(a0)
+
+	jr	ra
+END(bn_mul_comba4)
+
+#undef	a_4
+#undef	a_5
+#undef	a_6
+#undef	a_7
+#define	a_4	b_0
+#define	a_5	b_1
+#define	a_6	b_2
+#define	a_7	b_3
+
+.align	5
+LEAF(bn_sqr_comba8)
+	.set	reorder
+	ld	a_0,0(a1)
+	ld	a_1,8(a1)
+	ld	a_2,16(a1)
+	ld	a_3,24(a1)
+
+	dmultu	a_0,a_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
+	ld	a_4,32(a1)
+	ld	a_5,40(a1)
+	ld	a_6,48(a1)
+	ld	a_7,56(a1)
+	mflo	c_1
+	mfhi	c_2
+	sd	c_1,0(a0)
+
+	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	c_3,t_2,AT
+	sd	c_2,8(a0)
+
+	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,16(a0)
+
+	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_1,a_2		/* mul_add_c2(a[1],b[2],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,24(a0)
+
+	dmultu	a_4,a_0		/* mul_add_c2(a[4],b[0],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_2,a_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,32(a0)
+
+	dmultu	a_0,a_5		/* mul_add_c2(a[0],b[5],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_1,a_4		/* mul_add_c2(a[1],b[4],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,40(a0)
+
+	dmultu	a_6,a_0		/* mul_add_c2(a[6],b[0],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_5,a_1		/* mul_add_c2(a[5],b[1],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_4,a_2		/* mul_add_c2(a[4],b[2],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_3,a_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,48(a0)
+
+	dmultu	a_0,a_7		/* mul_add_c2(a[0],b[7],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_1,a_6		/* mul_add_c2(a[1],b[6],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_2,a_5		/* mul_add_c2(a[2],b[5],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_3,a_4		/* mul_add_c2(a[3],b[4],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,56(a0)
+
+	dmultu	a_7,a_1		/* mul_add_c2(a[7],b[1],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_6,a_2		/* mul_add_c2(a[6],b[2],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_5,a_3		/* mul_add_c2(a[5],b[3],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_4,a_4		/* mul_add_c(a[4],b[4],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,64(a0)
+
+	dmultu	a_2,a_7		/* mul_add_c2(a[2],b[7],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_3,a_6		/* mul_add_c2(a[3],b[6],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_4,a_5		/* mul_add_c2(a[4],b[5],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,72(a0)
+
+	dmultu	a_7,a_3		/* mul_add_c2(a[7],b[3],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_6,a_4		/* mul_add_c2(a[6],b[4],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_5,a_5		/* mul_add_c(a[5],b[5],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,80(a0)
+
+	dmultu	a_4,a_7		/* mul_add_c2(a[4],b[7],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_5,a_6		/* mul_add_c2(a[5],b[6],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,88(a0)
+
+	dmultu	a_7,a_5		/* mul_add_c2(a[7],b[5],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_6,a_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,96(a0)
+
+	dmultu	a_6,a_7		/* mul_add_c2(a[6],b[7],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,104(a0)
+
+	dmultu	a_7,a_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sd	c_3,112(a0)
+	sd	c_1,120(a0)
+
+	jr	ra
+END(bn_sqr_comba8)
+
+.align	5
+LEAF(bn_sqr_comba4)
+	.set	reorder
+	ld	a_0,0(a1)
+	ld	a_1,8(a1)
+	ld	a_2,16(a1)
+	ld	a_3,24(a1)
+	dmultu	a_0,a_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
+	mflo	c_1
+	mfhi	c_2
+	sd	c_1,0(a0)
+
+	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	c_3,t_2,AT
+	sd	c_2,8(a0)
+
+	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,16(a0)
+
+	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	dmultu	a_1,a_2		/* mul_add_c(a2[1],b[2],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	slt	AT,t_2,zero
+	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
+	sd	c_1,24(a0)
+
+	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	dmultu	a_2,a_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_2,t_1
+	sltu	AT,c_2,t_1
+	daddu	t_2,AT
+	daddu	c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
+	sd	c_2,32(a0)
+
+	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
+	mflo	t_1
+	mfhi	t_2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
+	daddu	c_3,t_1
+	sltu	AT,c_3,t_1
+	daddu	t_2,AT
+	daddu	c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
+	sd	c_3,40(a0)
+
+	dmultu	a_3,a_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
+	mflo	t_1
+	mfhi	t_2
+	daddu	c_1,t_1
+	sltu	AT,c_1,t_1
+	daddu	t_2,AT
+	daddu	c_2,t_2
+	sd	c_1,48(a0)
+	sd	c_2,56(a0)
+
+	jr	ra
+END(bn_sqr_comba4)
diff --git a/app/openssl/crypto/bn/asm/pa-risc2.s b/app/openssl/crypto/bn/asm/pa-risc2.s
new file mode 100644
index 00000000..f3b16290
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/pa-risc2.s
@@ -0,0 +1,1618 @@
+;
+; PA-RISC 2.0 implementation of bn_asm code, based on the
+; 64-bit version of the code.  This code is effectively the
+; same as the 64-bit version except the register model is
+; slightly different given all values must be 32-bit between
+; function calls.  Thus the 64-bit return values are returned
+; in %ret0 and %ret1 vs just %ret0 as is done in 64-bit
+;
+;
+; This code is approximately 2x faster than the C version
+; for RSA/DSA.
+;
+; See http://devresource.hp.com/  for more details on the PA-RISC
+; architecture.  Also see the book "PA-RISC 2.0 Architecture"
+; by Gerry Kane for information on the instruction set architecture.
+;
+; Code written by Chris Ruemmler (with some help from the HP C
+; compiler).
+;
+; The code compiles with HP's assembler
+;
+
+	.level	2.0N
+	.space	$TEXT$
+	.subspa	$CODE$,QUAD=0,ALIGN=8,ACCESS=0x2c,CODE_ONLY
+
+;
+; Global Register definitions used for the routines.
+;
+; Some information about HP's runtime architecture for 32-bits.
+;
+; "Caller save" means the calling function must save the register
+; if it wants the register to be preserved.
+; "Callee save" means if a function uses the register, it must save
+; the value before using it.
+;
+; For the floating point registers 
+;
+;    "caller save" registers: fr4-fr11, fr22-fr31
+;    "callee save" registers: fr12-fr21
+;    "special" registers: fr0-fr3 (status and exception registers)
+;
+; For the integer registers
+;     value zero             :  r0
+;     "caller save" registers: r1,r19-r26
+;     "callee save" registers: r3-r18
+;     return register        :  r2  (rp)
+;     return values          ; r28,r29  (ret0,ret1)
+;     Stack pointer          ; r30  (sp) 
+;     millicode return ptr   ; r31  (also a caller save register)
+
+
+;
+; Arguments to the routines
+;
+r_ptr       .reg %r26
+a_ptr       .reg %r25
+b_ptr       .reg %r24
+num         .reg %r24
+n           .reg %r23
+
+;
+; Note that the "w" argument for bn_mul_add_words and bn_mul_words
+; is passed on the stack at a delta of -56 from the top of stack
+; as the routine is entered.
+;
+
+;
+; Globals used in some routines
+;
+
+top_overflow .reg %r23
+high_mask    .reg %r22    ; value 0xffffffff80000000L
+
+
+;------------------------------------------------------------------------------
+;
+; bn_mul_add_words
+;
+;BN_ULONG bn_mul_add_words(BN_ULONG *r_ptr, BN_ULONG *a_ptr, 
+;								int num, BN_ULONG w)
+;
+; arg0 = r_ptr
+; arg1 = a_ptr
+; arg3 = num
+; -56(sp) =  w
+;
+; Local register definitions
+;
+
+fm1          .reg %fr22
+fm           .reg %fr23
+ht_temp      .reg %fr24
+ht_temp_1    .reg %fr25
+lt_temp      .reg %fr26
+lt_temp_1    .reg %fr27
+fm1_1        .reg %fr28
+fm_1         .reg %fr29
+
+fw_h         .reg %fr7L
+fw_l         .reg %fr7R
+fw           .reg %fr7
+
+fht_0        .reg %fr8L
+flt_0        .reg %fr8R
+t_float_0    .reg %fr8
+
+fht_1        .reg %fr9L
+flt_1        .reg %fr9R
+t_float_1    .reg %fr9
+
+tmp_0        .reg %r31
+tmp_1        .reg %r21
+m_0          .reg %r20 
+m_1          .reg %r19 
+ht_0         .reg %r1  
+ht_1         .reg %r3
+lt_0         .reg %r4
+lt_1         .reg %r5
+m1_0         .reg %r6 
+m1_1         .reg %r7 
+rp_val       .reg %r8
+rp_val_1     .reg %r9
+
+bn_mul_add_words
+	.export	bn_mul_add_words,entry,NO_RELOCATION,LONG_RETURN
+	.proc
+	.callinfo frame=128
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3  
+    STD     %r4,8(%sp)          ; save r4  
+	NOP                         ; Needed to make the loop 16-byte aligned
+	NOP                         ; needed to make the loop 16-byte aligned
+
+    STD     %r5,16(%sp)         ; save r5  
+	NOP
+    STD     %r6,24(%sp)         ; save r6  
+    STD     %r7,32(%sp)         ; save r7  
+
+    STD     %r8,40(%sp)         ; save r8  
+    STD     %r9,48(%sp)         ; save r9  
+    COPY    %r0,%ret1           ; return 0 by default
+    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
+
+    CMPIB,>= 0,num,bn_mul_add_words_exit  ; if (num <= 0) then exit
+	LDO     128(%sp),%sp        ; bump stack
+
+	;
+	; The loop is unrolled twice, so if there is only 1 number
+    ; then go straight to the cleanup code.
+	;
+	CMPIB,= 1,num,bn_mul_add_words_single_top
+	FLDD    -184(%sp),fw        ; (-56-128) load up w into fw (fw_h/fw_l)
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
+    ; two 32-bit mutiplies can be issued per cycle.
+    ; 
+bn_mul_add_words_unroll2
+
+    FLDD    0(a_ptr),t_float_0       ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    FLDD    8(a_ptr),t_float_1       ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    LDD     0(r_ptr),rp_val          ; rp[0]
+    LDD     8(r_ptr),rp_val_1        ; rp[1]
+
+    XMPYU   fht_0,fw_l,fm1           ; m1[0] = fht_0*fw_l
+    XMPYU   fht_1,fw_l,fm1_1         ; m1[1] = fht_1*fw_l
+    FSTD    fm1,-16(%sp)             ; -16(sp) = m1[0]
+    FSTD    fm1_1,-48(%sp)           ; -48(sp) = m1[1]
+
+    XMPYU   flt_0,fw_h,fm            ; m[0] = flt_0*fw_h
+    XMPYU   flt_1,fw_h,fm_1          ; m[1] = flt_1*fw_h
+    FSTD    fm,-8(%sp)               ; -8(sp) = m[0]
+    FSTD    fm_1,-40(%sp)            ; -40(sp) = m[1]
+
+    XMPYU   fht_0,fw_h,ht_temp       ; ht_temp   = fht_0*fw_h
+    XMPYU   fht_1,fw_h,ht_temp_1     ; ht_temp_1 = fht_1*fw_h
+    FSTD    ht_temp,-24(%sp)         ; -24(sp)   = ht_temp
+    FSTD    ht_temp_1,-56(%sp)       ; -56(sp)   = ht_temp_1
+
+    XMPYU   flt_0,fw_l,lt_temp       ; lt_temp = lt*fw_l
+    XMPYU   flt_1,fw_l,lt_temp_1     ; lt_temp = lt*fw_l
+    FSTD    lt_temp,-32(%sp)         ; -32(sp) = lt_temp 
+    FSTD    lt_temp_1,-64(%sp)       ; -64(sp) = lt_temp_1 
+
+    LDD     -8(%sp),m_0              ; m[0] 
+    LDD     -40(%sp),m_1             ; m[1]
+    LDD     -16(%sp),m1_0            ; m1[0]
+    LDD     -48(%sp),m1_1            ; m1[1]
+
+    LDD     -24(%sp),ht_0            ; ht[0]
+    LDD     -56(%sp),ht_1            ; ht[1]
+    ADD,L   m1_0,m_0,tmp_0           ; tmp_0 = m[0] + m1[0]; 
+    ADD,L   m1_1,m_1,tmp_1           ; tmp_1 = m[1] + m1[1]; 
+
+    LDD     -32(%sp),lt_0            
+    LDD     -64(%sp),lt_1            
+    CMPCLR,*>>= tmp_0,m1_0, %r0      ; if (m[0] < m1[0])
+    ADD,L   ht_0,top_overflow,ht_0   ; ht[0] += (1<<32)
+
+    CMPCLR,*>>= tmp_1,m1_1,%r0       ; if (m[1] < m1[1])
+    ADD,L   ht_1,top_overflow,ht_1   ; ht[1] += (1<<32)
+    EXTRD,U tmp_0,31,32,m_0          ; m[0]>>32  
+    DEPD,Z  tmp_0,31,32,m1_0         ; m1[0] = m[0]<<32 
+
+    EXTRD,U tmp_1,31,32,m_1          ; m[1]>>32  
+    DEPD,Z  tmp_1,31,32,m1_1         ; m1[1] = m[1]<<32 
+    ADD,L   ht_0,m_0,ht_0            ; ht[0]+= (m[0]>>32)
+    ADD,L   ht_1,m_1,ht_1            ; ht[1]+= (m[1]>>32)
+
+    ADD     lt_0,m1_0,lt_0           ; lt[0] = lt[0]+m1[0];
+	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
+    ADD     lt_1,m1_1,lt_1           ; lt[1] = lt[1]+m1[1];
+    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
+
+    ADD    %ret1,lt_0,lt_0           ; lt[0] = lt[0] + c;
+	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
+    ADD     lt_0,rp_val,lt_0         ; lt[0] = lt[0]+rp[0]
+    ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
+
+	LDO    -2(num),num               ; num = num - 2;
+    ADD     ht_0,lt_1,lt_1           ; lt[1] = lt[1] + ht_0 (c);
+    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
+    STD     lt_0,0(r_ptr)            ; rp[0] = lt[0]
+
+    ADD     lt_1,rp_val_1,lt_1       ; lt[1] = lt[1]+rp[1]
+    ADD,DC  ht_1,%r0,%ret1           ; ht[1]++
+    LDO     16(a_ptr),a_ptr          ; a_ptr += 2
+
+    STD     lt_1,8(r_ptr)            ; rp[1] = lt[1]
+	CMPIB,<= 2,num,bn_mul_add_words_unroll2 ; go again if more to do
+    LDO     16(r_ptr),r_ptr          ; r_ptr += 2
+
+    CMPIB,=,N 0,num,bn_mul_add_words_exit ; are we done, or cleanup last one
+
+	;
+	; Top of loop aligned on 64-byte boundary
+	;
+bn_mul_add_words_single_top
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    LDD     0(r_ptr),rp_val           ; rp[0]
+    LDO     8(a_ptr),a_ptr            ; a_ptr++
+    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
+    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
+    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
+    FSTD    fm,-8(%sp)                ; -8(sp) = m
+    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
+    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
+    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
+    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
+
+    LDD     -8(%sp),m_0               
+    LDD    -16(%sp),m1_0              ; m1 = temp1 
+    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
+    LDD     -24(%sp),ht_0             
+    LDD     -32(%sp),lt_0             
+
+    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
+    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
+
+    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
+    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
+
+    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
+    ADD     lt_0,m1_0,tmp_0           ; tmp_0 = lt+m1;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+    ADD     %ret1,tmp_0,lt_0          ; lt = lt + c;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+    ADD     lt_0,rp_val,lt_0          ; lt = lt+rp[0]
+    ADD,DC  ht_0,%r0,%ret1            ; ht++
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+
+bn_mul_add_words_exit
+    .EXIT
+	
+    EXTRD,U %ret1,31,32,%ret0         ; for 32-bit, return in ret0/ret1
+    LDD     -80(%sp),%r9              ; restore r9  
+    LDD     -88(%sp),%r8              ; restore r8  
+    LDD     -96(%sp),%r7              ; restore r7  
+    LDD     -104(%sp),%r6             ; restore r6  
+    LDD     -112(%sp),%r5             ; restore r5  
+    LDD     -120(%sp),%r4             ; restore r4  
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3             ; restore r3
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+;----------------------------------------------------------------------------
+;
+;BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+;
+; arg0 = rp
+; arg1 = ap
+; arg3 = num
+; w on stack at -56(sp)
+
+bn_mul_words
+	.proc
+	.callinfo frame=128
+    .entry
+	.EXPORT	bn_mul_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3  
+    STD     %r4,8(%sp)          ; save r4  
+	NOP
+    STD     %r5,16(%sp)         ; save r5  
+
+    STD     %r6,24(%sp)         ; save r6  
+    STD     %r7,32(%sp)         ; save r7  
+    COPY    %r0,%ret1           ; return 0 by default
+    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
+
+    CMPIB,>= 0,num,bn_mul_words_exit
+	LDO     128(%sp),%sp    ; bump stack
+
+	;
+	; See if only 1 word to do, thus just do cleanup
+	;
+	CMPIB,= 1,num,bn_mul_words_single_top
+	FLDD    -184(%sp),fw        ; (-56-128) load up w into fw (fw_h/fw_l)
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
+    ; two 32-bit mutiplies can be issued per cycle.
+    ; 
+bn_mul_words_unroll2
+
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    FLDD    8(a_ptr),t_float_1        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    XMPYU   fht_0,fw_l,fm1            ; m1[0] = fht_0*fw_l
+    XMPYU   fht_1,fw_l,fm1_1          ; m1[1] = ht*fw_l
+
+    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
+    FSTD    fm1_1,-48(%sp)            ; -48(sp) = m1
+    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
+    XMPYU   flt_1,fw_h,fm_1           ; m = lt*fw_h
+
+    FSTD    fm,-8(%sp)                ; -8(sp) = m
+    FSTD    fm_1,-40(%sp)             ; -40(sp) = m
+    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = fht_0*fw_h
+    XMPYU   fht_1,fw_h,ht_temp_1      ; ht_temp = ht*fw_h
+
+    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
+    FSTD    ht_temp_1,-56(%sp)        ; -56(sp) = ht
+    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
+    XMPYU   flt_1,fw_l,lt_temp_1      ; lt_temp = lt*fw_l
+
+    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
+    FSTD    lt_temp_1,-64(%sp)        ; -64(sp) = lt 
+    LDD     -8(%sp),m_0               
+    LDD     -40(%sp),m_1              
+
+    LDD    -16(%sp),m1_0              
+    LDD    -48(%sp),m1_1              
+    LDD     -24(%sp),ht_0             
+    LDD     -56(%sp),ht_1             
+
+    ADD,L   m1_0,m_0,tmp_0            ; tmp_0 = m + m1; 
+    ADD,L   m1_1,m_1,tmp_1            ; tmp_1 = m + m1; 
+    LDD     -32(%sp),lt_0             
+    LDD     -64(%sp),lt_1             
+
+    CMPCLR,*>>= tmp_0,m1_0, %r0       ; if (m < m1)
+    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
+    CMPCLR,*>>= tmp_1,m1_1,%r0        ; if (m < m1)
+    ADD,L   ht_1,top_overflow,ht_1    ; ht += (1<<32)
+
+    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
+    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
+    EXTRD,U tmp_1,31,32,m_1           ; m>>32  
+    DEPD,Z  tmp_1,31,32,m1_1          ; m1 = m<<32 
+
+    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
+    ADD,L   ht_1,m_1,ht_1             ; ht+= (m>>32)
+    ADD     lt_0,m1_0,lt_0            ; lt = lt+m1;
+	ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    ADD     lt_1,m1_1,lt_1            ; lt = lt+m1;
+    ADD,DC  ht_1,%r0,ht_1             ; ht++
+    ADD    %ret1,lt_0,lt_0            ; lt = lt + c (ret1);
+	ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    ADD     ht_0,lt_1,lt_1            ; lt = lt + c (ht_0)
+    ADD,DC  ht_1,%r0,ht_1             ; ht++
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+    STD     lt_1,8(r_ptr)             ; rp[1] = lt
+
+	COPY    ht_1,%ret1                ; carry = ht
+	LDO    -2(num),num                ; num = num - 2;
+    LDO     16(a_ptr),a_ptr           ; ap += 2
+	CMPIB,<= 2,num,bn_mul_words_unroll2
+    LDO     16(r_ptr),r_ptr           ; rp++
+
+    CMPIB,=,N 0,num,bn_mul_words_exit ; are we done?
+
+	;
+	; Top of loop aligned on 64-byte boundary
+	;
+bn_mul_words_single_top
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+
+    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
+    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
+    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
+    FSTD    fm,-8(%sp)                ; -8(sp) = m
+    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
+    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
+    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
+    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
+
+    LDD     -8(%sp),m_0               
+    LDD    -16(%sp),m1_0              
+    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
+    LDD     -24(%sp),ht_0             
+    LDD     -32(%sp),lt_0             
+
+    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
+    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
+
+    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
+    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
+
+    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
+    ADD     lt_0,m1_0,lt_0            ; lt= lt+m1;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    ADD     %ret1,lt_0,lt_0           ; lt = lt + c;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    COPY    ht_0,%ret1                ; copy carry
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+
+bn_mul_words_exit
+    .EXIT
+    EXTRD,U %ret1,31,32,%ret0           ; for 32-bit, return in ret0/ret1
+    LDD     -96(%sp),%r7              ; restore r7  
+    LDD     -104(%sp),%r6             ; restore r6  
+    LDD     -112(%sp),%r5             ; restore r5  
+    LDD     -120(%sp),%r4             ; restore r4  
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3             ; restore r3
+	.PROCEND	
+
+;----------------------------------------------------------------------------
+;
+;void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num)
+;
+; arg0 = rp
+; arg1 = ap
+; arg2 = num
+;
+
+bn_sqr_words
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_sqr_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3  
+    STD     %r4,8(%sp)          ; save r4  
+	NOP
+    STD     %r5,16(%sp)         ; save r5  
+
+    CMPIB,>= 0,num,bn_sqr_words_exit
+	LDO     128(%sp),%sp       ; bump stack
+
+	;
+	; If only 1, the goto straight to cleanup
+	;
+	CMPIB,= 1,num,bn_sqr_words_single_top
+    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+
+bn_sqr_words_unroll2
+    FLDD    0(a_ptr),t_float_0        ; a[0]
+    FLDD    8(a_ptr),t_float_1        ; a[1]
+    XMPYU   fht_0,flt_0,fm            ; m[0]
+    XMPYU   fht_1,flt_1,fm_1          ; m[1]
+
+    FSTD    fm,-24(%sp)               ; store m[0]
+    FSTD    fm_1,-56(%sp)             ; store m[1]
+    XMPYU   flt_0,flt_0,lt_temp       ; lt[0]
+    XMPYU   flt_1,flt_1,lt_temp_1     ; lt[1]
+
+    FSTD    lt_temp,-16(%sp)          ; store lt[0]
+    FSTD    lt_temp_1,-48(%sp)        ; store lt[1]
+    XMPYU   fht_0,fht_0,ht_temp       ; ht[0]
+    XMPYU   fht_1,fht_1,ht_temp_1     ; ht[1]
+
+    FSTD    ht_temp,-8(%sp)           ; store ht[0]
+    FSTD    ht_temp_1,-40(%sp)        ; store ht[1]
+    LDD     -24(%sp),m_0             
+    LDD     -56(%sp),m_1              
+
+    AND     m_0,high_mask,tmp_0       ; m[0] & Mask
+    AND     m_1,high_mask,tmp_1       ; m[1] & Mask
+    DEPD,Z  m_0,30,31,m_0             ; m[0] << 32+1
+    DEPD,Z  m_1,30,31,m_1             ; m[1] << 32+1
+
+    LDD     -16(%sp),lt_0        
+    LDD     -48(%sp),lt_1        
+    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m[0]&Mask >> 32-1
+    EXTRD,U tmp_1,32,33,tmp_1         ; tmp_1 = m[1]&Mask >> 32-1
+
+    LDD     -8(%sp),ht_0            
+    LDD     -40(%sp),ht_1           
+    ADD,L   ht_0,tmp_0,ht_0           ; ht[0] += tmp_0
+    ADD,L   ht_1,tmp_1,ht_1           ; ht[1] += tmp_1
+
+    ADD     lt_0,m_0,lt_0             ; lt = lt+m
+    ADD,DC  ht_0,%r0,ht_0             ; ht[0]++
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt[0]
+    STD     ht_0,8(r_ptr)             ; rp[1] = ht[1]
+
+    ADD     lt_1,m_1,lt_1             ; lt = lt+m
+    ADD,DC  ht_1,%r0,ht_1             ; ht[1]++
+    STD     lt_1,16(r_ptr)            ; rp[2] = lt[1]
+    STD     ht_1,24(r_ptr)            ; rp[3] = ht[1]
+
+	LDO    -2(num),num                ; num = num - 2;
+    LDO     16(a_ptr),a_ptr           ; ap += 2
+	CMPIB,<= 2,num,bn_sqr_words_unroll2
+    LDO     32(r_ptr),r_ptr           ; rp += 4
+
+    CMPIB,=,N 0,num,bn_sqr_words_exit ; are we done?
+
+	;
+	; Top of loop aligned on 64-byte boundary
+	;
+bn_sqr_words_single_top
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+
+    XMPYU   fht_0,flt_0,fm            ; m
+    FSTD    fm,-24(%sp)               ; store m
+
+    XMPYU   flt_0,flt_0,lt_temp       ; lt
+    FSTD    lt_temp,-16(%sp)          ; store lt
+
+    XMPYU   fht_0,fht_0,ht_temp       ; ht
+    FSTD    ht_temp,-8(%sp)           ; store ht
+
+    LDD     -24(%sp),m_0              ; load m
+    AND     m_0,high_mask,tmp_0       ; m & Mask
+    DEPD,Z  m_0,30,31,m_0             ; m << 32+1
+    LDD     -16(%sp),lt_0             ; lt
+
+    LDD     -8(%sp),ht_0              ; ht
+    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m&Mask >> 32-1
+    ADD     m_0,lt_0,lt_0             ; lt = lt+m
+    ADD,L   ht_0,tmp_0,ht_0           ; ht += tmp_0
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+    STD     ht_0,8(r_ptr)             ; rp[1] = ht
+
+bn_sqr_words_exit
+    .EXIT
+    LDD     -112(%sp),%r5       ; restore r5  
+    LDD     -120(%sp),%r4       ; restore r4  
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3 
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+
+;----------------------------------------------------------------------------
+;
+;BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+;
+; arg0 = rp 
+; arg1 = ap
+; arg2 = bp 
+; arg3 = n
+
+t  .reg %r22
+b  .reg %r21
+l  .reg %r20
+
+bn_add_words
+	.proc
+    .entry
+	.callinfo
+	.EXPORT	bn_add_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+	.align 64
+
+    CMPIB,>= 0,n,bn_add_words_exit
+    COPY    %r0,%ret1           ; return 0 by default
+
+	;
+	; If 2 or more numbers do the loop
+	;
+	CMPIB,= 1,n,bn_add_words_single_top
+	NOP
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+bn_add_words_unroll2
+	LDD     0(a_ptr),t
+	LDD     0(b_ptr),b
+	ADD     t,%ret1,t                    ; t = t+c;
+	ADD,DC  %r0,%r0,%ret1                ; set c to carry
+	ADD     t,b,l                        ; l = t + b[0]
+	ADD,DC  %ret1,%r0,%ret1              ; c+= carry
+	STD     l,0(r_ptr)
+
+	LDD     8(a_ptr),t
+	LDD     8(b_ptr),b
+	ADD     t,%ret1,t                     ; t = t+c;
+	ADD,DC  %r0,%r0,%ret1                 ; set c to carry
+	ADD     t,b,l                         ; l = t + b[0]
+	ADD,DC  %ret1,%r0,%ret1               ; c+= carry
+	STD     l,8(r_ptr)
+
+	LDO     -2(n),n
+	LDO     16(a_ptr),a_ptr
+	LDO     16(b_ptr),b_ptr
+
+	CMPIB,<= 2,n,bn_add_words_unroll2
+	LDO     16(r_ptr),r_ptr
+
+    CMPIB,=,N 0,n,bn_add_words_exit ; are we done?
+
+bn_add_words_single_top
+	LDD     0(a_ptr),t
+	LDD     0(b_ptr),b
+
+	ADD     t,%ret1,t                 ; t = t+c;
+	ADD,DC  %r0,%r0,%ret1             ; set c to carry (could use CMPCLR??)
+	ADD     t,b,l                     ; l = t + b[0]
+	ADD,DC  %ret1,%r0,%ret1           ; c+= carry
+	STD     l,0(r_ptr)
+
+bn_add_words_exit
+    .EXIT
+    BVE     (%rp)
+    EXTRD,U %ret1,31,32,%ret0           ; for 32-bit, return in ret0/ret1
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+;----------------------------------------------------------------------------
+;
+;BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+;
+; arg0 = rp 
+; arg1 = ap
+; arg2 = bp 
+; arg3 = n
+
+t1       .reg %r22
+t2       .reg %r21
+sub_tmp1 .reg %r20
+sub_tmp2 .reg %r19
+
+
+bn_sub_words
+	.proc
+	.callinfo 
+	.EXPORT	bn_sub_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    CMPIB,>=  0,n,bn_sub_words_exit
+    COPY    %r0,%ret1           ; return 0 by default
+
+	;
+	; If 2 or more numbers do the loop
+	;
+	CMPIB,= 1,n,bn_sub_words_single_top
+	NOP
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+bn_sub_words_unroll2
+	LDD     0(a_ptr),t1
+	LDD     0(b_ptr),t2
+	SUB     t1,t2,sub_tmp1           ; t3 = t1-t2; 
+	SUB     sub_tmp1,%ret1,sub_tmp1  ; t3 = t3- c; 
+
+	CMPCLR,*>> t1,t2,sub_tmp2        ; clear if t1 > t2
+	LDO      1(%r0),sub_tmp2
+	
+	CMPCLR,*= t1,t2,%r0
+	COPY    sub_tmp2,%ret1
+	STD     sub_tmp1,0(r_ptr)
+
+	LDD     8(a_ptr),t1
+	LDD     8(b_ptr),t2
+	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
+	SUB     sub_tmp1,%ret1,sub_tmp1   ; t3 = t3- c; 
+	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
+	LDO      1(%r0),sub_tmp2
+	
+	CMPCLR,*= t1,t2,%r0
+	COPY    sub_tmp2,%ret1
+	STD     sub_tmp1,8(r_ptr)
+
+	LDO     -2(n),n
+	LDO     16(a_ptr),a_ptr
+	LDO     16(b_ptr),b_ptr
+
+	CMPIB,<= 2,n,bn_sub_words_unroll2
+	LDO     16(r_ptr),r_ptr
+
+    CMPIB,=,N 0,n,bn_sub_words_exit ; are we done?
+
+bn_sub_words_single_top
+	LDD     0(a_ptr),t1
+	LDD     0(b_ptr),t2
+	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
+	SUB     sub_tmp1,%ret1,sub_tmp1   ; t3 = t3- c; 
+	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
+	LDO      1(%r0),sub_tmp2
+	
+	CMPCLR,*= t1,t2,%r0
+	COPY    sub_tmp2,%ret1
+
+	STD     sub_tmp1,0(r_ptr)
+
+bn_sub_words_exit
+    .EXIT
+    BVE     (%rp)
+    EXTRD,U %ret1,31,32,%ret0           ; for 32-bit, return in ret0/ret1
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+;------------------------------------------------------------------------------
+;
+; unsigned long bn_div_words(unsigned long h, unsigned long l, unsigned long d)
+;
+; arg0 = h
+; arg1 = l
+; arg2 = d
+;
+; This is mainly just output from the HP C compiler.  
+;
+;------------------------------------------------------------------------------
+bn_div_words
+	.PROC
+	.EXPORT	bn_div_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR,RTNVAL=GR,LONG_RETURN
+	.IMPORT	BN_num_bits_word,CODE
+	;--- not PIC	.IMPORT	__iob,DATA
+	;--- not PIC	.IMPORT	fprintf,CODE
+	.IMPORT	abort,CODE
+	.IMPORT	$$div2U,MILLICODE
+	.CALLINFO CALLER,FRAME=144,ENTRY_GR=%r9,SAVE_RP,ARGS_SAVED,ORDERING_AWARE
+        .ENTRY
+        STW     %r2,-20(%r30)   ;offset 0x8ec
+        STW,MA  %r3,192(%r30)   ;offset 0x8f0
+        STW     %r4,-188(%r30)  ;offset 0x8f4
+        DEPD    %r5,31,32,%r6   ;offset 0x8f8
+        STD     %r6,-184(%r30)  ;offset 0x8fc
+        DEPD    %r7,31,32,%r8   ;offset 0x900
+        STD     %r8,-176(%r30)  ;offset 0x904
+        STW     %r9,-168(%r30)  ;offset 0x908
+        LDD     -248(%r30),%r3  ;offset 0x90c
+        COPY    %r26,%r4        ;offset 0x910
+        COPY    %r24,%r5        ;offset 0x914
+        DEPD    %r25,31,32,%r4  ;offset 0x918
+        CMPB,*<>        %r3,%r0,$0006000C       ;offset 0x91c
+        DEPD    %r23,31,32,%r5  ;offset 0x920
+        MOVIB,TR        -1,%r29,$00060002       ;offset 0x924
+        EXTRD,U %r29,31,32,%r28 ;offset 0x928
+$0006002A
+        LDO     -1(%r29),%r29   ;offset 0x92c
+        SUB     %r23,%r7,%r23   ;offset 0x930
+$00060024
+        SUB     %r4,%r31,%r25   ;offset 0x934
+        AND     %r25,%r19,%r26  ;offset 0x938
+        CMPB,*<>,N      %r0,%r26,$00060046      ;offset 0x93c
+        DEPD,Z  %r25,31,32,%r20 ;offset 0x940
+        OR      %r20,%r24,%r21  ;offset 0x944
+        CMPB,*<<,N      %r21,%r23,$0006002A     ;offset 0x948
+        SUB     %r31,%r2,%r31   ;offset 0x94c
+$00060046
+$0006002E
+        DEPD,Z  %r23,31,32,%r25 ;offset 0x950
+        EXTRD,U %r23,31,32,%r26 ;offset 0x954
+        AND     %r25,%r19,%r24  ;offset 0x958
+        ADD,L   %r31,%r26,%r31  ;offset 0x95c
+        CMPCLR,*>>=     %r5,%r24,%r0    ;offset 0x960
+        LDO     1(%r31),%r31    ;offset 0x964
+$00060032
+        CMPB,*<<=,N     %r31,%r4,$00060036      ;offset 0x968
+        LDO     -1(%r29),%r29   ;offset 0x96c
+        ADD,L   %r4,%r3,%r4     ;offset 0x970
+$00060036
+        ADDIB,=,N       -1,%r8,$D0      ;offset 0x974
+        SUB     %r5,%r24,%r28   ;offset 0x978
+$0006003A
+        SUB     %r4,%r31,%r24   ;offset 0x97c
+        SHRPD   %r24,%r28,32,%r4        ;offset 0x980
+        DEPD,Z  %r29,31,32,%r9  ;offset 0x984
+        DEPD,Z  %r28,31,32,%r5  ;offset 0x988
+$0006001C
+        EXTRD,U %r4,31,32,%r31  ;offset 0x98c
+        CMPB,*<>,N      %r31,%r2,$00060020      ;offset 0x990
+        MOVB,TR %r6,%r29,$D1    ;offset 0x994
+        STD     %r29,-152(%r30) ;offset 0x998
+$0006000C
+        EXTRD,U %r3,31,32,%r25  ;offset 0x99c
+        COPY    %r3,%r26        ;offset 0x9a0
+        EXTRD,U %r3,31,32,%r9   ;offset 0x9a4
+        EXTRD,U %r4,31,32,%r8   ;offset 0x9a8
+        .CALL   ARGW0=GR,ARGW1=GR,RTNVAL=GR     ;in=25,26;out=28;
+        B,L     BN_num_bits_word,%r2    ;offset 0x9ac
+        EXTRD,U %r5,31,32,%r7   ;offset 0x9b0
+        LDI     64,%r20 ;offset 0x9b4
+        DEPD    %r7,31,32,%r5   ;offset 0x9b8
+        DEPD    %r8,31,32,%r4   ;offset 0x9bc
+        DEPD    %r9,31,32,%r3   ;offset 0x9c0
+        CMPB,=  %r28,%r20,$00060012     ;offset 0x9c4
+        COPY    %r28,%r24       ;offset 0x9c8
+        MTSARCM %r24    ;offset 0x9cc
+        DEPDI,Z -1,%sar,1,%r19  ;offset 0x9d0
+        CMPB,*>>,N      %r4,%r19,$D2    ;offset 0x9d4
+$00060012
+        SUBI    64,%r24,%r31    ;offset 0x9d8
+        CMPCLR,*<<      %r4,%r3,%r0     ;offset 0x9dc
+        SUB     %r4,%r3,%r4     ;offset 0x9e0
+$00060016
+        CMPB,=  %r31,%r0,$0006001A      ;offset 0x9e4
+        COPY    %r0,%r9 ;offset 0x9e8
+        MTSARCM %r31    ;offset 0x9ec
+        DEPD,Z  %r3,%sar,64,%r3 ;offset 0x9f0
+        SUBI    64,%r31,%r26    ;offset 0x9f4
+        MTSAR   %r26    ;offset 0x9f8
+        SHRPD   %r4,%r5,%sar,%r4        ;offset 0x9fc
+        MTSARCM %r31    ;offset 0xa00
+        DEPD,Z  %r5,%sar,64,%r5 ;offset 0xa04
+$0006001A
+        DEPDI,Z -1,31,32,%r19   ;offset 0xa08
+        AND     %r3,%r19,%r29   ;offset 0xa0c
+        EXTRD,U %r29,31,32,%r2  ;offset 0xa10
+        DEPDI,Z -1,63,32,%r6    ;offset 0xa14
+        MOVIB,TR        2,%r8,$0006001C ;offset 0xa18
+        EXTRD,U %r3,63,32,%r7   ;offset 0xa1c
+$D2
+        ;--- not PIC	ADDIL   LR'__iob-$global$,%r27,%r1      ;offset 0xa20
+        ;--- not PIC	LDIL    LR'C$7,%r21     ;offset 0xa24
+        ;--- not PIC	LDO     RR'__iob-$global$+32(%r1),%r26  ;offset 0xa28
+        ;--- not PIC	.CALL   ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR    ;in=24,25,26;out=28;
+        ;--- not PIC	B,L     fprintf,%r2     ;offset 0xa2c
+        ;--- not PIC	LDO     RR'C$7(%r21),%r25       ;offset 0xa30
+        .CALL           ;
+        B,L     abort,%r2       ;offset 0xa34
+        NOP             ;offset 0xa38
+        B       $D3     ;offset 0xa3c
+        LDW     -212(%r30),%r2  ;offset 0xa40
+$00060020
+        COPY    %r4,%r26        ;offset 0xa44
+        EXTRD,U %r4,31,32,%r25  ;offset 0xa48
+        COPY    %r2,%r24        ;offset 0xa4c
+        .CALL   ;in=23,24,25,26;out=20,21,22,28,29; (MILLICALL)
+        B,L     $$div2U,%r31    ;offset 0xa50
+        EXTRD,U %r2,31,32,%r23  ;offset 0xa54
+        DEPD    %r28,31,32,%r29 ;offset 0xa58
+$00060022
+        STD     %r29,-152(%r30) ;offset 0xa5c
+$D1
+        AND     %r5,%r19,%r24   ;offset 0xa60
+        EXTRD,U %r24,31,32,%r24 ;offset 0xa64
+        STW     %r2,-160(%r30)  ;offset 0xa68
+        STW     %r7,-128(%r30)  ;offset 0xa6c
+        FLDD    -152(%r30),%fr4 ;offset 0xa70
+        FLDD    -152(%r30),%fr7 ;offset 0xa74
+        FLDW    -160(%r30),%fr8L        ;offset 0xa78
+        FLDW    -128(%r30),%fr5L        ;offset 0xa7c
+        XMPYU   %fr8L,%fr7L,%fr10       ;offset 0xa80
+        FSTD    %fr10,-136(%r30)        ;offset 0xa84
+        XMPYU   %fr8L,%fr7R,%fr22       ;offset 0xa88
+        FSTD    %fr22,-144(%r30)        ;offset 0xa8c
+        XMPYU   %fr5L,%fr4L,%fr11       ;offset 0xa90
+        XMPYU   %fr5L,%fr4R,%fr23       ;offset 0xa94
+        FSTD    %fr11,-112(%r30)        ;offset 0xa98
+        FSTD    %fr23,-120(%r30)        ;offset 0xa9c
+        LDD     -136(%r30),%r28 ;offset 0xaa0
+        DEPD,Z  %r28,31,32,%r31 ;offset 0xaa4
+        LDD     -144(%r30),%r20 ;offset 0xaa8
+        ADD,L   %r20,%r31,%r31  ;offset 0xaac
+        LDD     -112(%r30),%r22 ;offset 0xab0
+        DEPD,Z  %r22,31,32,%r22 ;offset 0xab4
+        LDD     -120(%r30),%r21 ;offset 0xab8
+        B       $00060024       ;offset 0xabc
+        ADD,L   %r21,%r22,%r23  ;offset 0xac0
+$D0
+        OR      %r9,%r29,%r29   ;offset 0xac4
+$00060040
+        EXTRD,U %r29,31,32,%r28 ;offset 0xac8
+$00060002
+$L2
+        LDW     -212(%r30),%r2  ;offset 0xacc
+$D3
+        LDW     -168(%r30),%r9  ;offset 0xad0
+        LDD     -176(%r30),%r8  ;offset 0xad4
+        EXTRD,U %r8,31,32,%r7   ;offset 0xad8
+        LDD     -184(%r30),%r6  ;offset 0xadc
+        EXTRD,U %r6,31,32,%r5   ;offset 0xae0
+        LDW     -188(%r30),%r4  ;offset 0xae4
+        BVE     (%r2)   ;offset 0xae8
+        .EXIT
+        LDW,MB  -192(%r30),%r3  ;offset 0xaec
+	.PROCEND	;in=23,25;out=28,29;fpin=105,107;
+
+
+
+
+;----------------------------------------------------------------------------
+;
+; Registers to hold 64-bit values to manipulate.  The "L" part
+; of the register corresponds to the upper 32-bits, while the "R"
+; part corresponds to the lower 32-bits
+; 
+; Note, that when using b6 and b7, the code must save these before
+; using them because they are callee save registers 
+; 
+;
+; Floating point registers to use to save values that
+; are manipulated.  These don't collide with ftemp1-6 and
+; are all caller save registers
+;
+a0        .reg %fr22
+a0L       .reg %fr22L
+a0R       .reg %fr22R
+
+a1        .reg %fr23
+a1L       .reg %fr23L
+a1R       .reg %fr23R
+
+a2        .reg %fr24
+a2L       .reg %fr24L
+a2R       .reg %fr24R
+
+a3        .reg %fr25
+a3L       .reg %fr25L
+a3R       .reg %fr25R
+
+a4        .reg %fr26
+a4L       .reg %fr26L
+a4R       .reg %fr26R
+
+a5        .reg %fr27
+a5L       .reg %fr27L
+a5R       .reg %fr27R
+
+a6        .reg %fr28
+a6L       .reg %fr28L
+a6R       .reg %fr28R
+
+a7        .reg %fr29
+a7L       .reg %fr29L
+a7R       .reg %fr29R
+
+b0        .reg %fr30
+b0L       .reg %fr30L
+b0R       .reg %fr30R
+
+b1        .reg %fr31
+b1L       .reg %fr31L
+b1R       .reg %fr31R
+
+;
+; Temporary floating point variables, these are all caller save
+; registers
+;
+ftemp1    .reg %fr4
+ftemp2    .reg %fr5
+ftemp3    .reg %fr6
+ftemp4    .reg %fr7
+
+;
+; The B set of registers when used.
+;
+
+b2        .reg %fr8
+b2L       .reg %fr8L
+b2R       .reg %fr8R
+
+b3        .reg %fr9
+b3L       .reg %fr9L
+b3R       .reg %fr9R
+
+b4        .reg %fr10
+b4L       .reg %fr10L
+b4R       .reg %fr10R
+
+b5        .reg %fr11
+b5L       .reg %fr11L
+b5R       .reg %fr11R
+
+b6        .reg %fr12
+b6L       .reg %fr12L
+b6R       .reg %fr12R
+
+b7        .reg %fr13
+b7L       .reg %fr13L
+b7R       .reg %fr13R
+
+c1           .reg %r21   ; only reg
+temp1        .reg %r20   ; only reg
+temp2        .reg %r19   ; only reg
+temp3        .reg %r31   ; only reg
+
+m1           .reg %r28   
+c2           .reg %r23   
+high_one     .reg %r1
+ht           .reg %r6
+lt           .reg %r5
+m            .reg %r4
+c3           .reg %r3
+
+SQR_ADD_C  .macro  A0L,A0R,C1,C2,C3
+    XMPYU   A0L,A0R,ftemp1       ; m
+    FSTD    ftemp1,-24(%sp)      ; store m
+
+    XMPYU   A0R,A0R,ftemp2       ; lt
+    FSTD    ftemp2,-16(%sp)      ; store lt
+
+    XMPYU   A0L,A0L,ftemp3       ; ht
+    FSTD    ftemp3,-8(%sp)       ; store ht
+
+    LDD     -24(%sp),m           ; load m
+    AND     m,high_mask,temp2    ; m & Mask
+    DEPD,Z  m,30,31,temp3        ; m << 32+1
+    LDD     -16(%sp),lt          ; lt
+
+    LDD     -8(%sp),ht           ; ht
+    EXTRD,U temp2,32,33,temp1    ; temp1 = m&Mask >> 32-1
+    ADD     temp3,lt,lt          ; lt = lt+m
+    ADD,L   ht,temp1,ht          ; ht += temp1
+    ADD,DC  ht,%r0,ht            ; ht++
+
+    ADD     C1,lt,C1             ; c1=c1+lt
+    ADD,DC  ht,%r0,ht            ; ht++
+
+    ADD     C2,ht,C2             ; c2=c2+ht
+    ADD,DC  C3,%r0,C3            ; c3++
+.endm
+
+SQR_ADD_C2 .macro  A0L,A0R,A1L,A1R,C1,C2,C3
+    XMPYU   A0L,A1R,ftemp1          ; m1 = bl*ht
+    FSTD    ftemp1,-16(%sp)         ;
+    XMPYU   A0R,A1L,ftemp2          ; m = bh*lt
+    FSTD    ftemp2,-8(%sp)          ;
+    XMPYU   A0R,A1R,ftemp3          ; lt = bl*lt
+    FSTD    ftemp3,-32(%sp)
+    XMPYU   A0L,A1L,ftemp4          ; ht = bh*ht
+    FSTD    ftemp4,-24(%sp)         ;
+
+    LDD     -8(%sp),m               ; r21 = m
+    LDD     -16(%sp),m1             ; r19 = m1
+    ADD,L   m,m1,m                  ; m+m1
+
+    DEPD,Z  m,31,32,temp3           ; (m+m1<<32)
+    LDD     -24(%sp),ht             ; r24 = ht
+
+    CMPCLR,*>>= m,m1,%r0            ; if (m < m1)
+    ADD,L   ht,high_one,ht          ; ht+=high_one
+
+    EXTRD,U m,31,32,temp1           ; m >> 32
+    LDD     -32(%sp),lt             ; lt
+    ADD,L   ht,temp1,ht             ; ht+= m>>32
+    ADD     lt,temp3,lt             ; lt = lt+m1
+    ADD,DC  ht,%r0,ht               ; ht++
+
+    ADD     ht,ht,ht                ; ht=ht+ht;
+    ADD,DC  C3,%r0,C3               ; add in carry (c3++)
+
+    ADD     lt,lt,lt                ; lt=lt+lt;
+    ADD,DC  ht,%r0,ht               ; add in carry (ht++)
+
+    ADD     C1,lt,C1                ; c1=c1+lt
+    ADD,DC,*NUV ht,%r0,ht           ; add in carry (ht++)
+    LDO     1(C3),C3              ; bump c3 if overflow,nullify otherwise
+
+    ADD     C2,ht,C2                ; c2 = c2 + ht
+    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
+.endm
+
+;
+;void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
+; arg0 = r_ptr
+; arg1 = a_ptr
+;
+
+bn_sqr_comba8
+	.PROC
+	.CALLINFO FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_sqr_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .ENTRY
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD     0(a_ptr),a0       
+    FLDD     8(a_ptr),a1       
+    FLDD    16(a_ptr),a2       
+    FLDD    24(a_ptr),a3       
+    FLDD    32(a_ptr),a4       
+    FLDD    40(a_ptr),a5       
+    FLDD    48(a_ptr),a6       
+    FLDD    56(a_ptr),a7       
+
+	SQR_ADD_C a0L,a0R,c1,c2,c3
+	STD     c1,0(r_ptr)          ; r[0] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
+	STD     c2,8(r_ptr)          ; r[1] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a1L,a1R,c3,c1,c2
+	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
+	STD     c3,16(r_ptr)            ; r[2] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
+	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
+	STD     c1,24(r_ptr)           ; r[3] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C a2L,a2R,c2,c3,c1
+	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
+	SQR_ADD_C2 a4L,a4R,a0L,a0R,c2,c3,c1
+	STD     c2,32(r_ptr)          ; r[4] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C2 a5L,a5R,a0L,a0R,c3,c1,c2
+	SQR_ADD_C2 a4L,a4R,a1L,a1R,c3,c1,c2
+	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
+	STD     c3,40(r_ptr)          ; r[5] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C a3L,a3R,c1,c2,c3
+	SQR_ADD_C2 a4L,a4R,a2L,a2R,c1,c2,c3
+	SQR_ADD_C2 a5L,a5R,a1L,a1R,c1,c2,c3
+	SQR_ADD_C2 a6L,a6R,a0L,a0R,c1,c2,c3
+	STD     c1,48(r_ptr)          ; r[6] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a7L,a7R,a0L,a0R,c2,c3,c1
+	SQR_ADD_C2 a6L,a6R,a1L,a1R,c2,c3,c1
+	SQR_ADD_C2 a5L,a5R,a2L,a2R,c2,c3,c1
+	SQR_ADD_C2 a4L,a4R,a3L,a3R,c2,c3,c1
+	STD     c2,56(r_ptr)          ; r[7] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a4L,a4R,c3,c1,c2
+	SQR_ADD_C2 a5L,a5R,a3L,a3R,c3,c1,c2
+	SQR_ADD_C2 a6L,a6R,a2L,a2R,c3,c1,c2
+	SQR_ADD_C2 a7L,a7R,a1L,a1R,c3,c1,c2
+	STD     c3,64(r_ptr)          ; r[8] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C2 a7L,a7R,a2L,a2R,c1,c2,c3
+	SQR_ADD_C2 a6L,a6R,a3L,a3R,c1,c2,c3
+	SQR_ADD_C2 a5L,a5R,a4L,a4R,c1,c2,c3
+	STD     c1,72(r_ptr)          ; r[9] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C a5L,a5R,c2,c3,c1
+	SQR_ADD_C2 a6L,a6R,a4L,a4R,c2,c3,c1
+	SQR_ADD_C2 a7L,a7R,a3L,a3R,c2,c3,c1
+	STD     c2,80(r_ptr)          ; r[10] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C2 a7L,a7R,a4L,a4R,c3,c1,c2
+	SQR_ADD_C2 a6L,a6R,a5L,a5R,c3,c1,c2
+	STD     c3,88(r_ptr)          ; r[11] = c3;
+	COPY    %r0,c3
+	
+	SQR_ADD_C a6L,a6R,c1,c2,c3
+	SQR_ADD_C2 a7L,a7R,a5L,a5R,c1,c2,c3
+	STD     c1,96(r_ptr)          ; r[12] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a7L,a7R,a6L,a6R,c2,c3,c1
+	STD     c2,104(r_ptr)         ; r[13] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a7L,a7R,c3,c1,c2
+	STD     c3, 112(r_ptr)       ; r[14] = c3
+	STD     c1, 120(r_ptr)       ; r[15] = c1
+
+    .EXIT
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+;-----------------------------------------------------------------------------
+;
+;void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
+; arg0 = r_ptr
+; arg1 = a_ptr
+;
+
+bn_sqr_comba4
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_sqr_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD     0(a_ptr),a0       
+    FLDD     8(a_ptr),a1       
+    FLDD    16(a_ptr),a2       
+    FLDD    24(a_ptr),a3       
+    FLDD    32(a_ptr),a4       
+    FLDD    40(a_ptr),a5       
+    FLDD    48(a_ptr),a6       
+    FLDD    56(a_ptr),a7       
+
+	SQR_ADD_C a0L,a0R,c1,c2,c3
+
+	STD     c1,0(r_ptr)          ; r[0] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
+
+	STD     c2,8(r_ptr)          ; r[1] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a1L,a1R,c3,c1,c2
+	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
+
+	STD     c3,16(r_ptr)            ; r[2] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
+	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
+
+	STD     c1,24(r_ptr)           ; r[3] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C a2L,a2R,c2,c3,c1
+	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
+
+	STD     c2,32(r_ptr)           ; r[4] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
+	STD     c3,40(r_ptr)           ; r[5] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C a3L,a3R,c1,c2,c3
+	STD     c1,48(r_ptr)           ; r[6] = c1;
+	STD     c2,56(r_ptr)           ; r[7] = c2;
+
+    .EXIT
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+
+;---------------------------------------------------------------------------
+
+MUL_ADD_C  .macro  A0L,A0R,B0L,B0R,C1,C2,C3
+    XMPYU   A0L,B0R,ftemp1        ; m1 = bl*ht
+    FSTD    ftemp1,-16(%sp)       ;
+    XMPYU   A0R,B0L,ftemp2        ; m = bh*lt
+    FSTD    ftemp2,-8(%sp)        ;
+    XMPYU   A0R,B0R,ftemp3        ; lt = bl*lt
+    FSTD    ftemp3,-32(%sp)
+    XMPYU   A0L,B0L,ftemp4        ; ht = bh*ht
+    FSTD    ftemp4,-24(%sp)       ;
+
+    LDD     -8(%sp),m             ; r21 = m
+    LDD     -16(%sp),m1           ; r19 = m1
+    ADD,L   m,m1,m                ; m+m1
+
+    DEPD,Z  m,31,32,temp3         ; (m+m1<<32)
+    LDD     -24(%sp),ht           ; r24 = ht
+
+    CMPCLR,*>>= m,m1,%r0          ; if (m < m1)
+    ADD,L   ht,high_one,ht        ; ht+=high_one
+
+    EXTRD,U m,31,32,temp1         ; m >> 32
+    LDD     -32(%sp),lt           ; lt
+    ADD,L   ht,temp1,ht           ; ht+= m>>32
+    ADD     lt,temp3,lt           ; lt = lt+m1
+    ADD,DC  ht,%r0,ht             ; ht++
+
+    ADD     C1,lt,C1              ; c1=c1+lt
+    ADD,DC  ht,%r0,ht             ; bump c3 if overflow,nullify otherwise
+
+    ADD     C2,ht,C2              ; c2 = c2 + ht
+    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
+.endm
+
+
+;
+;void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+; arg0 = r_ptr
+; arg1 = a_ptr
+; arg2 = b_ptr
+;
+
+bn_mul_comba8
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_mul_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+    FSTD    %fr12,32(%sp)       ; save r6
+    FSTD    %fr13,40(%sp)       ; save r7
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD      0(a_ptr),a0       
+    FLDD      8(a_ptr),a1       
+    FLDD     16(a_ptr),a2       
+    FLDD     24(a_ptr),a3       
+    FLDD     32(a_ptr),a4       
+    FLDD     40(a_ptr),a5       
+    FLDD     48(a_ptr),a6       
+    FLDD     56(a_ptr),a7       
+
+    FLDD      0(b_ptr),b0       
+    FLDD      8(b_ptr),b1       
+    FLDD     16(b_ptr),b2       
+    FLDD     24(b_ptr),b3       
+    FLDD     32(b_ptr),b4       
+    FLDD     40(b_ptr),b5       
+    FLDD     48(b_ptr),b6       
+    FLDD     56(b_ptr),b7       
+
+	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
+	STD       c1,0(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
+	STD       c2,8(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
+	STD       c3,16(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
+	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
+	STD       c1,24(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a4L,a4R,b0L,b0R,c2,c3,c1
+	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
+	MUL_ADD_C a0L,a0R,b4L,b4R,c2,c3,c1
+	STD       c2,32(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a0L,a0R,b5L,b5R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b4L,b4R,c3,c1,c2
+	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
+	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
+	MUL_ADD_C a4L,a4R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a5L,a5R,b0L,b0R,c3,c1,c2
+	STD       c3,40(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a6L,a6R,b0L,b0R,c1,c2,c3
+	MUL_ADD_C a5L,a5R,b1L,b1R,c1,c2,c3
+	MUL_ADD_C a4L,a4R,b2L,b2R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a2L,a2R,b4L,b4R,c1,c2,c3
+	MUL_ADD_C a1L,a1R,b5L,b5R,c1,c2,c3
+	MUL_ADD_C a0L,a0R,b6L,b6R,c1,c2,c3
+	STD       c1,48(r_ptr)
+	COPY      %r0,c1
+	
+	MUL_ADD_C a0L,a0R,b7L,b7R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b6L,b6R,c2,c3,c1
+	MUL_ADD_C a2L,a2R,b5L,b5R,c2,c3,c1
+	MUL_ADD_C a3L,a3R,b4L,b4R,c2,c3,c1
+	MUL_ADD_C a4L,a4R,b3L,b3R,c2,c3,c1
+	MUL_ADD_C a5L,a5R,b2L,b2R,c2,c3,c1
+	MUL_ADD_C a6L,a6R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a7L,a7R,b0L,b0R,c2,c3,c1
+	STD       c2,56(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a7L,a7R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a6L,a6R,b2L,b2R,c3,c1,c2
+	MUL_ADD_C a5L,a5R,b3L,b3R,c3,c1,c2
+	MUL_ADD_C a4L,a4R,b4L,b4R,c3,c1,c2
+	MUL_ADD_C a3L,a3R,b5L,b5R,c3,c1,c2
+	MUL_ADD_C a2L,a2R,b6L,b6R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b7L,b7R,c3,c1,c2
+	STD       c3,64(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a2L,a2R,b7L,b7R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b6L,b6R,c1,c2,c3
+	MUL_ADD_C a4L,a4R,b5L,b5R,c1,c2,c3
+	MUL_ADD_C a5L,a5R,b4L,b4R,c1,c2,c3
+	MUL_ADD_C a6L,a6R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a7L,a7R,b2L,b2R,c1,c2,c3
+	STD       c1,72(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a7L,a7R,b3L,b3R,c2,c3,c1
+	MUL_ADD_C a6L,a6R,b4L,b4R,c2,c3,c1
+	MUL_ADD_C a5L,a5R,b5L,b5R,c2,c3,c1
+	MUL_ADD_C a4L,a4R,b6L,b6R,c2,c3,c1
+	MUL_ADD_C a3L,a3R,b7L,b7R,c2,c3,c1
+	STD       c2,80(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a4L,a4R,b7L,b7R,c3,c1,c2
+	MUL_ADD_C a5L,a5R,b6L,b6R,c3,c1,c2
+	MUL_ADD_C a6L,a6R,b5L,b5R,c3,c1,c2
+	MUL_ADD_C a7L,a7R,b4L,b4R,c3,c1,c2
+	STD       c3,88(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a7L,a7R,b5L,b5R,c1,c2,c3
+	MUL_ADD_C a6L,a6R,b6L,b6R,c1,c2,c3
+	MUL_ADD_C a5L,a5R,b7L,b7R,c1,c2,c3
+	STD       c1,96(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a6L,a6R,b7L,b7R,c2,c3,c1
+	MUL_ADD_C a7L,a7R,b6L,b6R,c2,c3,c1
+	STD       c2,104(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a7L,a7R,b7L,b7R,c3,c1,c2
+	STD       c3,112(r_ptr)
+	STD       c1,120(r_ptr)
+
+    .EXIT
+    FLDD    -88(%sp),%fr13 
+    FLDD    -96(%sp),%fr12 
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+;-----------------------------------------------------------------------------
+;
+;void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+; arg0 = r_ptr
+; arg1 = a_ptr
+; arg2 = b_ptr
+;
+
+bn_mul_comba4
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_mul_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+    FSTD    %fr12,32(%sp)       ; save r6
+    FSTD    %fr13,40(%sp)       ; save r7
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD      0(a_ptr),a0       
+    FLDD      8(a_ptr),a1       
+    FLDD     16(a_ptr),a2       
+    FLDD     24(a_ptr),a3       
+
+    FLDD      0(b_ptr),b0       
+    FLDD      8(b_ptr),b1       
+    FLDD     16(b_ptr),b2       
+    FLDD     24(b_ptr),b3       
+
+	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
+	STD       c1,0(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
+	STD       c2,8(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
+	STD       c3,16(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
+	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
+	STD       c1,24(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
+	STD       c2,32(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
+	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
+	STD       c3,40(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
+	STD       c1,48(r_ptr)
+	STD       c2,56(r_ptr)
+
+    .EXIT
+    FLDD    -88(%sp),%fr13 
+    FLDD    -96(%sp),%fr12 
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+
+;--- not PIC	.SPACE	$TEXT$
+;--- not PIC	.SUBSPA	$CODE$
+;--- not PIC	.SPACE	$PRIVATE$,SORT=16
+;--- not PIC	.IMPORT	$global$,DATA
+;--- not PIC	.SPACE	$TEXT$
+;--- not PIC	.SUBSPA	$CODE$
+;--- not PIC	.SUBSPA	$LIT$,ACCESS=0x2c
+;--- not PIC	C$7
+;--- not PIC	.ALIGN	8
+;--- not PIC	.STRINGZ	"Division would overflow (%d)\n"
+	.END
diff --git a/app/openssl/crypto/bn/asm/pa-risc2W.s b/app/openssl/crypto/bn/asm/pa-risc2W.s
new file mode 100644
index 00000000..a9954575
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/pa-risc2W.s
@@ -0,0 +1,1605 @@
+;
+; PA-RISC 64-bit implementation of bn_asm code
+;
+; This code is approximately 2x faster than the C version
+; for RSA/DSA.
+;
+; See http://devresource.hp.com/  for more details on the PA-RISC
+; architecture.  Also see the book "PA-RISC 2.0 Architecture"
+; by Gerry Kane for information on the instruction set architecture.
+;
+; Code written by Chris Ruemmler (with some help from the HP C
+; compiler).
+;
+; The code compiles with HP's assembler
+;
+
+	.level	2.0W
+	.space	$TEXT$
+	.subspa	$CODE$,QUAD=0,ALIGN=8,ACCESS=0x2c,CODE_ONLY
+
+;
+; Global Register definitions used for the routines.
+;
+; Some information about HP's runtime architecture for 64-bits.
+;
+; "Caller save" means the calling function must save the register
+; if it wants the register to be preserved.
+; "Callee save" means if a function uses the register, it must save
+; the value before using it.
+;
+; For the floating point registers 
+;
+;    "caller save" registers: fr4-fr11, fr22-fr31
+;    "callee save" registers: fr12-fr21
+;    "special" registers: fr0-fr3 (status and exception registers)
+;
+; For the integer registers
+;     value zero             :  r0
+;     "caller save" registers: r1,r19-r26
+;     "callee save" registers: r3-r18
+;     return register        :  r2  (rp)
+;     return values          ; r28  (ret0,ret1)
+;     Stack pointer          ; r30  (sp) 
+;     global data pointer    ; r27  (dp)
+;     argument pointer       ; r29  (ap)
+;     millicode return ptr   ; r31  (also a caller save register)
+
+
+;
+; Arguments to the routines
+;
+r_ptr       .reg %r26
+a_ptr       .reg %r25
+b_ptr       .reg %r24
+num         .reg %r24
+w           .reg %r23
+n           .reg %r23
+
+
+;
+; Globals used in some routines
+;
+
+top_overflow .reg %r29
+high_mask    .reg %r22    ; value 0xffffffff80000000L
+
+
+;------------------------------------------------------------------------------
+;
+; bn_mul_add_words
+;
+;BN_ULONG bn_mul_add_words(BN_ULONG *r_ptr, BN_ULONG *a_ptr, 
+;								int num, BN_ULONG w)
+;
+; arg0 = r_ptr
+; arg1 = a_ptr
+; arg2 = num
+; arg3 = w
+;
+; Local register definitions
+;
+
+fm1          .reg %fr22
+fm           .reg %fr23
+ht_temp      .reg %fr24
+ht_temp_1    .reg %fr25
+lt_temp      .reg %fr26
+lt_temp_1    .reg %fr27
+fm1_1        .reg %fr28
+fm_1         .reg %fr29
+
+fw_h         .reg %fr7L
+fw_l         .reg %fr7R
+fw           .reg %fr7
+
+fht_0        .reg %fr8L
+flt_0        .reg %fr8R
+t_float_0    .reg %fr8
+
+fht_1        .reg %fr9L
+flt_1        .reg %fr9R
+t_float_1    .reg %fr9
+
+tmp_0        .reg %r31
+tmp_1        .reg %r21
+m_0          .reg %r20 
+m_1          .reg %r19 
+ht_0         .reg %r1  
+ht_1         .reg %r3
+lt_0         .reg %r4
+lt_1         .reg %r5
+m1_0         .reg %r6 
+m1_1         .reg %r7 
+rp_val       .reg %r8
+rp_val_1     .reg %r9
+
+bn_mul_add_words
+	.export	bn_mul_add_words,entry,NO_RELOCATION,LONG_RETURN
+	.proc
+	.callinfo frame=128
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3  
+    STD     %r4,8(%sp)          ; save r4  
+	NOP                         ; Needed to make the loop 16-byte aligned
+	NOP                         ; Needed to make the loop 16-byte aligned
+
+    STD     %r5,16(%sp)         ; save r5  
+    STD     %r6,24(%sp)         ; save r6  
+    STD     %r7,32(%sp)         ; save r7  
+    STD     %r8,40(%sp)         ; save r8  
+
+    STD     %r9,48(%sp)         ; save r9  
+    COPY    %r0,%ret0           ; return 0 by default
+    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
+	STD     w,56(%sp)           ; store w on stack
+
+    CMPIB,>= 0,num,bn_mul_add_words_exit  ; if (num <= 0) then exit
+	LDO     128(%sp),%sp       ; bump stack
+
+	;
+	; The loop is unrolled twice, so if there is only 1 number
+    ; then go straight to the cleanup code.
+	;
+	CMPIB,= 1,num,bn_mul_add_words_single_top
+	FLDD    -72(%sp),fw     ; load up w into fp register fw (fw_h/fw_l)
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
+    ; two 32-bit mutiplies can be issued per cycle.
+    ; 
+bn_mul_add_words_unroll2
+
+    FLDD    0(a_ptr),t_float_0       ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    FLDD    8(a_ptr),t_float_1       ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    LDD     0(r_ptr),rp_val          ; rp[0]
+    LDD     8(r_ptr),rp_val_1        ; rp[1]
+
+    XMPYU   fht_0,fw_l,fm1           ; m1[0] = fht_0*fw_l
+    XMPYU   fht_1,fw_l,fm1_1         ; m1[1] = fht_1*fw_l
+    FSTD    fm1,-16(%sp)             ; -16(sp) = m1[0]
+    FSTD    fm1_1,-48(%sp)           ; -48(sp) = m1[1]
+
+    XMPYU   flt_0,fw_h,fm            ; m[0] = flt_0*fw_h
+    XMPYU   flt_1,fw_h,fm_1          ; m[1] = flt_1*fw_h
+    FSTD    fm,-8(%sp)               ; -8(sp) = m[0]
+    FSTD    fm_1,-40(%sp)            ; -40(sp) = m[1]
+
+    XMPYU   fht_0,fw_h,ht_temp       ; ht_temp   = fht_0*fw_h
+    XMPYU   fht_1,fw_h,ht_temp_1     ; ht_temp_1 = fht_1*fw_h
+    FSTD    ht_temp,-24(%sp)         ; -24(sp)   = ht_temp
+    FSTD    ht_temp_1,-56(%sp)       ; -56(sp)   = ht_temp_1
+
+    XMPYU   flt_0,fw_l,lt_temp       ; lt_temp = lt*fw_l
+    XMPYU   flt_1,fw_l,lt_temp_1     ; lt_temp = lt*fw_l
+    FSTD    lt_temp,-32(%sp)         ; -32(sp) = lt_temp 
+    FSTD    lt_temp_1,-64(%sp)       ; -64(sp) = lt_temp_1 
+
+    LDD     -8(%sp),m_0              ; m[0] 
+    LDD     -40(%sp),m_1             ; m[1]
+    LDD     -16(%sp),m1_0            ; m1[0]
+    LDD     -48(%sp),m1_1            ; m1[1]
+
+    LDD     -24(%sp),ht_0            ; ht[0]
+    LDD     -56(%sp),ht_1            ; ht[1]
+    ADD,L   m1_0,m_0,tmp_0           ; tmp_0 = m[0] + m1[0]; 
+    ADD,L   m1_1,m_1,tmp_1           ; tmp_1 = m[1] + m1[1]; 
+
+    LDD     -32(%sp),lt_0            
+    LDD     -64(%sp),lt_1            
+    CMPCLR,*>>= tmp_0,m1_0, %r0      ; if (m[0] < m1[0])
+    ADD,L   ht_0,top_overflow,ht_0   ; ht[0] += (1<<32)
+
+    CMPCLR,*>>= tmp_1,m1_1,%r0       ; if (m[1] < m1[1])
+    ADD,L   ht_1,top_overflow,ht_1   ; ht[1] += (1<<32)
+    EXTRD,U tmp_0,31,32,m_0          ; m[0]>>32  
+    DEPD,Z  tmp_0,31,32,m1_0         ; m1[0] = m[0]<<32 
+
+    EXTRD,U tmp_1,31,32,m_1          ; m[1]>>32  
+    DEPD,Z  tmp_1,31,32,m1_1         ; m1[1] = m[1]<<32 
+    ADD,L   ht_0,m_0,ht_0            ; ht[0]+= (m[0]>>32)
+    ADD,L   ht_1,m_1,ht_1            ; ht[1]+= (m[1]>>32)
+
+    ADD     lt_0,m1_0,lt_0           ; lt[0] = lt[0]+m1[0];
+	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
+    ADD     lt_1,m1_1,lt_1           ; lt[1] = lt[1]+m1[1];
+    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
+
+    ADD    %ret0,lt_0,lt_0           ; lt[0] = lt[0] + c;
+	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
+    ADD     lt_0,rp_val,lt_0         ; lt[0] = lt[0]+rp[0]
+    ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
+
+	LDO    -2(num),num               ; num = num - 2;
+    ADD     ht_0,lt_1,lt_1           ; lt[1] = lt[1] + ht_0 (c);
+    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
+    STD     lt_0,0(r_ptr)            ; rp[0] = lt[0]
+
+    ADD     lt_1,rp_val_1,lt_1       ; lt[1] = lt[1]+rp[1]
+    ADD,DC  ht_1,%r0,%ret0           ; ht[1]++
+    LDO     16(a_ptr),a_ptr          ; a_ptr += 2
+
+    STD     lt_1,8(r_ptr)            ; rp[1] = lt[1]
+	CMPIB,<= 2,num,bn_mul_add_words_unroll2 ; go again if more to do
+    LDO     16(r_ptr),r_ptr          ; r_ptr += 2
+
+    CMPIB,=,N 0,num,bn_mul_add_words_exit ; are we done, or cleanup last one
+
+	;
+	; Top of loop aligned on 64-byte boundary
+	;
+bn_mul_add_words_single_top
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    LDD     0(r_ptr),rp_val           ; rp[0]
+    LDO     8(a_ptr),a_ptr            ; a_ptr++
+    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
+    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
+    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
+    FSTD    fm,-8(%sp)                ; -8(sp) = m
+    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
+    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
+    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
+    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
+
+    LDD     -8(%sp),m_0               
+    LDD    -16(%sp),m1_0              ; m1 = temp1 
+    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
+    LDD     -24(%sp),ht_0             
+    LDD     -32(%sp),lt_0             
+
+    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
+    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
+
+    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
+    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
+
+    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
+    ADD     lt_0,m1_0,tmp_0           ; tmp_0 = lt+m1;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+    ADD     %ret0,tmp_0,lt_0          ; lt = lt + c;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+    ADD     lt_0,rp_val,lt_0          ; lt = lt+rp[0]
+    ADD,DC  ht_0,%r0,%ret0            ; ht++
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+
+bn_mul_add_words_exit
+    .EXIT
+    LDD     -80(%sp),%r9              ; restore r9  
+    LDD     -88(%sp),%r8              ; restore r8  
+    LDD     -96(%sp),%r7              ; restore r7  
+    LDD     -104(%sp),%r6             ; restore r6  
+    LDD     -112(%sp),%r5             ; restore r5  
+    LDD     -120(%sp),%r4             ; restore r4  
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3             ; restore r3
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+;----------------------------------------------------------------------------
+;
+;BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+;
+; arg0 = rp
+; arg1 = ap
+; arg2 = num
+; arg3 = w
+
+bn_mul_words
+	.proc
+	.callinfo frame=128
+    .entry
+	.EXPORT	bn_mul_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3  
+    STD     %r4,8(%sp)          ; save r4  
+    STD     %r5,16(%sp)         ; save r5  
+    STD     %r6,24(%sp)         ; save r6  
+
+    STD     %r7,32(%sp)         ; save r7  
+    COPY    %r0,%ret0           ; return 0 by default
+    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
+	STD     w,56(%sp)           ; w on stack
+
+    CMPIB,>= 0,num,bn_mul_words_exit
+	LDO     128(%sp),%sp       ; bump stack
+
+	;
+	; See if only 1 word to do, thus just do cleanup
+	;
+	CMPIB,= 1,num,bn_mul_words_single_top
+	FLDD    -72(%sp),fw     ; load up w into fp register fw (fw_h/fw_l)
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
+    ; two 32-bit mutiplies can be issued per cycle.
+    ; 
+bn_mul_words_unroll2
+
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    FLDD    8(a_ptr),t_float_1        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+    XMPYU   fht_0,fw_l,fm1            ; m1[0] = fht_0*fw_l
+    XMPYU   fht_1,fw_l,fm1_1          ; m1[1] = ht*fw_l
+
+    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
+    FSTD    fm1_1,-48(%sp)            ; -48(sp) = m1
+    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
+    XMPYU   flt_1,fw_h,fm_1           ; m = lt*fw_h
+
+    FSTD    fm,-8(%sp)                ; -8(sp) = m
+    FSTD    fm_1,-40(%sp)             ; -40(sp) = m
+    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = fht_0*fw_h
+    XMPYU   fht_1,fw_h,ht_temp_1      ; ht_temp = ht*fw_h
+
+    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
+    FSTD    ht_temp_1,-56(%sp)        ; -56(sp) = ht
+    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
+    XMPYU   flt_1,fw_l,lt_temp_1      ; lt_temp = lt*fw_l
+
+    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
+    FSTD    lt_temp_1,-64(%sp)        ; -64(sp) = lt 
+    LDD     -8(%sp),m_0               
+    LDD     -40(%sp),m_1              
+
+    LDD    -16(%sp),m1_0              
+    LDD    -48(%sp),m1_1              
+    LDD     -24(%sp),ht_0             
+    LDD     -56(%sp),ht_1             
+
+    ADD,L   m1_0,m_0,tmp_0            ; tmp_0 = m + m1; 
+    ADD,L   m1_1,m_1,tmp_1            ; tmp_1 = m + m1; 
+    LDD     -32(%sp),lt_0             
+    LDD     -64(%sp),lt_1             
+
+    CMPCLR,*>>= tmp_0,m1_0, %r0       ; if (m < m1)
+    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
+    CMPCLR,*>>= tmp_1,m1_1,%r0        ; if (m < m1)
+    ADD,L   ht_1,top_overflow,ht_1    ; ht += (1<<32)
+
+    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
+    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
+    EXTRD,U tmp_1,31,32,m_1           ; m>>32  
+    DEPD,Z  tmp_1,31,32,m1_1          ; m1 = m<<32 
+
+    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
+    ADD,L   ht_1,m_1,ht_1             ; ht+= (m>>32)
+    ADD     lt_0,m1_0,lt_0            ; lt = lt+m1;
+	ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    ADD     lt_1,m1_1,lt_1            ; lt = lt+m1;
+    ADD,DC  ht_1,%r0,ht_1             ; ht++
+    ADD    %ret0,lt_0,lt_0            ; lt = lt + c (ret0);
+	ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    ADD     ht_0,lt_1,lt_1            ; lt = lt + c (ht_0)
+    ADD,DC  ht_1,%r0,ht_1             ; ht++
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+    STD     lt_1,8(r_ptr)             ; rp[1] = lt
+
+	COPY    ht_1,%ret0                ; carry = ht
+	LDO    -2(num),num                ; num = num - 2;
+    LDO     16(a_ptr),a_ptr           ; ap += 2
+	CMPIB,<= 2,num,bn_mul_words_unroll2
+    LDO     16(r_ptr),r_ptr           ; rp++
+
+    CMPIB,=,N 0,num,bn_mul_words_exit ; are we done?
+
+	;
+	; Top of loop aligned on 64-byte boundary
+	;
+bn_mul_words_single_top
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+
+    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
+    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
+    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
+    FSTD    fm,-8(%sp)                ; -8(sp) = m
+    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
+    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
+    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
+    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
+
+    LDD     -8(%sp),m_0               
+    LDD    -16(%sp),m1_0              
+    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
+    LDD     -24(%sp),ht_0             
+    LDD     -32(%sp),lt_0             
+
+    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
+    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
+
+    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
+    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
+
+    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
+    ADD     lt_0,m1_0,lt_0            ; lt= lt+m1;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    ADD     %ret0,lt_0,lt_0           ; lt = lt + c;
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    COPY    ht_0,%ret0                ; copy carry
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+
+bn_mul_words_exit
+    .EXIT
+    LDD     -96(%sp),%r7              ; restore r7  
+    LDD     -104(%sp),%r6             ; restore r6  
+    LDD     -112(%sp),%r5             ; restore r5  
+    LDD     -120(%sp),%r4             ; restore r4  
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3             ; restore r3
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+;----------------------------------------------------------------------------
+;
+;void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num)
+;
+; arg0 = rp
+; arg1 = ap
+; arg2 = num
+;
+
+bn_sqr_words
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_sqr_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3  
+    STD     %r4,8(%sp)          ; save r4  
+	NOP
+    STD     %r5,16(%sp)         ; save r5  
+
+    CMPIB,>= 0,num,bn_sqr_words_exit
+	LDO     128(%sp),%sp       ; bump stack
+
+	;
+	; If only 1, the goto straight to cleanup
+	;
+	CMPIB,= 1,num,bn_sqr_words_single_top
+    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+
+bn_sqr_words_unroll2
+    FLDD    0(a_ptr),t_float_0        ; a[0]
+    FLDD    8(a_ptr),t_float_1        ; a[1]
+    XMPYU   fht_0,flt_0,fm            ; m[0]
+    XMPYU   fht_1,flt_1,fm_1          ; m[1]
+
+    FSTD    fm,-24(%sp)               ; store m[0]
+    FSTD    fm_1,-56(%sp)             ; store m[1]
+    XMPYU   flt_0,flt_0,lt_temp       ; lt[0]
+    XMPYU   flt_1,flt_1,lt_temp_1     ; lt[1]
+
+    FSTD    lt_temp,-16(%sp)          ; store lt[0]
+    FSTD    lt_temp_1,-48(%sp)        ; store lt[1]
+    XMPYU   fht_0,fht_0,ht_temp       ; ht[0]
+    XMPYU   fht_1,fht_1,ht_temp_1     ; ht[1]
+
+    FSTD    ht_temp,-8(%sp)           ; store ht[0]
+    FSTD    ht_temp_1,-40(%sp)        ; store ht[1]
+    LDD     -24(%sp),m_0             
+    LDD     -56(%sp),m_1              
+
+    AND     m_0,high_mask,tmp_0       ; m[0] & Mask
+    AND     m_1,high_mask,tmp_1       ; m[1] & Mask
+    DEPD,Z  m_0,30,31,m_0             ; m[0] << 32+1
+    DEPD,Z  m_1,30,31,m_1             ; m[1] << 32+1
+
+    LDD     -16(%sp),lt_0        
+    LDD     -48(%sp),lt_1        
+    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m[0]&Mask >> 32-1
+    EXTRD,U tmp_1,32,33,tmp_1         ; tmp_1 = m[1]&Mask >> 32-1
+
+    LDD     -8(%sp),ht_0            
+    LDD     -40(%sp),ht_1           
+    ADD,L   ht_0,tmp_0,ht_0           ; ht[0] += tmp_0
+    ADD,L   ht_1,tmp_1,ht_1           ; ht[1] += tmp_1
+
+    ADD     lt_0,m_0,lt_0             ; lt = lt+m
+    ADD,DC  ht_0,%r0,ht_0             ; ht[0]++
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt[0]
+    STD     ht_0,8(r_ptr)             ; rp[1] = ht[1]
+
+    ADD     lt_1,m_1,lt_1             ; lt = lt+m
+    ADD,DC  ht_1,%r0,ht_1             ; ht[1]++
+    STD     lt_1,16(r_ptr)            ; rp[2] = lt[1]
+    STD     ht_1,24(r_ptr)            ; rp[3] = ht[1]
+
+	LDO    -2(num),num                ; num = num - 2;
+    LDO     16(a_ptr),a_ptr           ; ap += 2
+	CMPIB,<= 2,num,bn_sqr_words_unroll2
+    LDO     32(r_ptr),r_ptr           ; rp += 4
+
+    CMPIB,=,N 0,num,bn_sqr_words_exit ; are we done?
+
+	;
+	; Top of loop aligned on 64-byte boundary
+	;
+bn_sqr_words_single_top
+    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
+
+    XMPYU   fht_0,flt_0,fm            ; m
+    FSTD    fm,-24(%sp)               ; store m
+
+    XMPYU   flt_0,flt_0,lt_temp       ; lt
+    FSTD    lt_temp,-16(%sp)          ; store lt
+
+    XMPYU   fht_0,fht_0,ht_temp       ; ht
+    FSTD    ht_temp,-8(%sp)           ; store ht
+
+    LDD     -24(%sp),m_0              ; load m
+    AND     m_0,high_mask,tmp_0       ; m & Mask
+    DEPD,Z  m_0,30,31,m_0             ; m << 32+1
+    LDD     -16(%sp),lt_0             ; lt
+
+    LDD     -8(%sp),ht_0              ; ht
+    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m&Mask >> 32-1
+    ADD     m_0,lt_0,lt_0             ; lt = lt+m
+    ADD,L   ht_0,tmp_0,ht_0           ; ht += tmp_0
+    ADD,DC  ht_0,%r0,ht_0             ; ht++
+
+    STD     lt_0,0(r_ptr)             ; rp[0] = lt
+    STD     ht_0,8(r_ptr)             ; rp[1] = ht
+
+bn_sqr_words_exit
+    .EXIT
+    LDD     -112(%sp),%r5       ; restore r5  
+    LDD     -120(%sp),%r4       ; restore r4  
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3 
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+
+;----------------------------------------------------------------------------
+;
+;BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+;
+; arg0 = rp 
+; arg1 = ap
+; arg2 = bp 
+; arg3 = n
+
+t  .reg %r22
+b  .reg %r21
+l  .reg %r20
+
+bn_add_words
+	.proc
+    .entry
+	.callinfo
+	.EXPORT	bn_add_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+	.align 64
+
+    CMPIB,>= 0,n,bn_add_words_exit
+    COPY    %r0,%ret0           ; return 0 by default
+
+	;
+	; If 2 or more numbers do the loop
+	;
+	CMPIB,= 1,n,bn_add_words_single_top
+	NOP
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+bn_add_words_unroll2
+	LDD     0(a_ptr),t
+	LDD     0(b_ptr),b
+	ADD     t,%ret0,t                    ; t = t+c;
+	ADD,DC  %r0,%r0,%ret0                ; set c to carry
+	ADD     t,b,l                        ; l = t + b[0]
+	ADD,DC  %ret0,%r0,%ret0              ; c+= carry
+	STD     l,0(r_ptr)
+
+	LDD     8(a_ptr),t
+	LDD     8(b_ptr),b
+	ADD     t,%ret0,t                     ; t = t+c;
+	ADD,DC  %r0,%r0,%ret0                 ; set c to carry
+	ADD     t,b,l                         ; l = t + b[0]
+	ADD,DC  %ret0,%r0,%ret0               ; c+= carry
+	STD     l,8(r_ptr)
+
+	LDO     -2(n),n
+	LDO     16(a_ptr),a_ptr
+	LDO     16(b_ptr),b_ptr
+
+	CMPIB,<= 2,n,bn_add_words_unroll2
+	LDO     16(r_ptr),r_ptr
+
+    CMPIB,=,N 0,n,bn_add_words_exit ; are we done?
+
+bn_add_words_single_top
+	LDD     0(a_ptr),t
+	LDD     0(b_ptr),b
+
+	ADD     t,%ret0,t                 ; t = t+c;
+	ADD,DC  %r0,%r0,%ret0             ; set c to carry (could use CMPCLR??)
+	ADD     t,b,l                     ; l = t + b[0]
+	ADD,DC  %ret0,%r0,%ret0           ; c+= carry
+	STD     l,0(r_ptr)
+
+bn_add_words_exit
+    .EXIT
+    BVE     (%rp)
+	NOP
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+;----------------------------------------------------------------------------
+;
+;BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+;
+; arg0 = rp 
+; arg1 = ap
+; arg2 = bp 
+; arg3 = n
+
+t1       .reg %r22
+t2       .reg %r21
+sub_tmp1 .reg %r20
+sub_tmp2 .reg %r19
+
+
+bn_sub_words
+	.proc
+	.callinfo 
+	.EXPORT	bn_sub_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    CMPIB,>=  0,n,bn_sub_words_exit
+    COPY    %r0,%ret0           ; return 0 by default
+
+	;
+	; If 2 or more numbers do the loop
+	;
+	CMPIB,= 1,n,bn_sub_words_single_top
+	NOP
+
+	;
+	; This loop is unrolled 2 times (64-byte aligned as well)
+	;
+bn_sub_words_unroll2
+	LDD     0(a_ptr),t1
+	LDD     0(b_ptr),t2
+	SUB     t1,t2,sub_tmp1           ; t3 = t1-t2; 
+	SUB     sub_tmp1,%ret0,sub_tmp1  ; t3 = t3- c; 
+
+	CMPCLR,*>> t1,t2,sub_tmp2        ; clear if t1 > t2
+	LDO      1(%r0),sub_tmp2
+	
+	CMPCLR,*= t1,t2,%r0
+	COPY    sub_tmp2,%ret0
+	STD     sub_tmp1,0(r_ptr)
+
+	LDD     8(a_ptr),t1
+	LDD     8(b_ptr),t2
+	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
+	SUB     sub_tmp1,%ret0,sub_tmp1   ; t3 = t3- c; 
+	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
+	LDO      1(%r0),sub_tmp2
+	
+	CMPCLR,*= t1,t2,%r0
+	COPY    sub_tmp2,%ret0
+	STD     sub_tmp1,8(r_ptr)
+
+	LDO     -2(n),n
+	LDO     16(a_ptr),a_ptr
+	LDO     16(b_ptr),b_ptr
+
+	CMPIB,<= 2,n,bn_sub_words_unroll2
+	LDO     16(r_ptr),r_ptr
+
+    CMPIB,=,N 0,n,bn_sub_words_exit ; are we done?
+
+bn_sub_words_single_top
+	LDD     0(a_ptr),t1
+	LDD     0(b_ptr),t2
+	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
+	SUB     sub_tmp1,%ret0,sub_tmp1   ; t3 = t3- c; 
+	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
+	LDO      1(%r0),sub_tmp2
+	
+	CMPCLR,*= t1,t2,%r0
+	COPY    sub_tmp2,%ret0
+
+	STD     sub_tmp1,0(r_ptr)
+
+bn_sub_words_exit
+    .EXIT
+    BVE     (%rp)
+	NOP
+	.PROCEND	;in=23,24,25,26,29;out=28;
+
+;------------------------------------------------------------------------------
+;
+; unsigned long bn_div_words(unsigned long h, unsigned long l, unsigned long d)
+;
+; arg0 = h
+; arg1 = l
+; arg2 = d
+;
+; This is mainly just modified assembly from the compiler, thus the
+; lack of variable names.
+;
+;------------------------------------------------------------------------------
+bn_div_words
+	.proc
+	.callinfo CALLER,FRAME=272,ENTRY_GR=%r10,SAVE_RP,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_div_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+	.IMPORT	BN_num_bits_word,CODE,NO_RELOCATION
+	.IMPORT	__iob,DATA
+	.IMPORT	fprintf,CODE,NO_RELOCATION
+	.IMPORT	abort,CODE,NO_RELOCATION
+	.IMPORT	$$div2U,MILLICODE
+    .entry
+    STD     %r2,-16(%r30)   
+    STD,MA  %r3,352(%r30)   
+    STD     %r4,-344(%r30)  
+    STD     %r5,-336(%r30)  
+    STD     %r6,-328(%r30)  
+    STD     %r7,-320(%r30)  
+    STD     %r8,-312(%r30)  
+    STD     %r9,-304(%r30)  
+    STD     %r10,-296(%r30)
+
+    STD     %r27,-288(%r30)             ; save gp
+
+    COPY    %r24,%r3           ; save d 
+    COPY    %r26,%r4           ; save h (high 64-bits)
+    LDO      -1(%r0),%ret0     ; return -1 by default	
+
+    CMPB,*=  %r0,%arg2,$D3     ; if (d == 0)
+    COPY    %r25,%r5           ; save l (low 64-bits)
+
+    LDO     -48(%r30),%r29     ; create ap 
+    .CALL   ;in=26,29;out=28;
+    B,L     BN_num_bits_word,%r2 
+    COPY    %r3,%r26        
+    LDD     -288(%r30),%r27    ; restore gp 
+    LDI     64,%r21 
+
+    CMPB,=  %r21,%ret0,$00000012   ;if (i == 64) (forward) 
+    COPY    %ret0,%r24             ; i   
+    MTSARCM %r24    
+    DEPDI,Z -1,%sar,1,%r29  
+    CMPB,*<<,N %r29,%r4,bn_div_err_case ; if (h > 1<<i) (forward) 
+
+$00000012
+    SUBI    64,%r24,%r31                       ; i = 64 - i;
+    CMPCLR,*<< %r4,%r3,%r0                     ; if (h >= d)
+    SUB     %r4,%r3,%r4                        ; h -= d
+    CMPB,=  %r31,%r0,$0000001A                 ; if (i)
+    COPY    %r0,%r10                           ; ret = 0
+    MTSARCM %r31                               ; i to shift
+    DEPD,Z  %r3,%sar,64,%r3                    ; d <<= i;
+    SUBI    64,%r31,%r19                       ; 64 - i; redundent
+    MTSAR   %r19                               ; (64 -i) to shift
+    SHRPD   %r4,%r5,%sar,%r4                   ; l>> (64-i)
+    MTSARCM %r31                               ; i to shift
+    DEPD,Z  %r5,%sar,64,%r5                    ; l <<= i;
+
+$0000001A
+    DEPDI,Z -1,31,32,%r19                      
+    EXTRD,U %r3,31,32,%r6                      ; dh=(d&0xfff)>>32
+    EXTRD,U %r3,63,32,%r8                      ; dl = d&0xffffff
+    LDO     2(%r0),%r9
+    STD    %r3,-280(%r30)                      ; "d" to stack
+
+$0000001C
+    DEPDI,Z -1,63,32,%r29                      ; 
+    EXTRD,U %r4,31,32,%r31                     ; h >> 32
+    CMPB,*=,N  %r31,%r6,$D2     	       ; if ((h>>32) != dh)(forward) div
+    COPY    %r4,%r26       
+    EXTRD,U %r4,31,32,%r25 
+    COPY    %r6,%r24      
+    .CALL   ;in=23,24,25,26;out=20,21,22,28,29; (MILLICALL)
+    B,L     $$div2U,%r2     
+    EXTRD,U %r6,31,32,%r23  
+    DEPD    %r28,31,32,%r29 
+$D2
+    STD     %r29,-272(%r30)                   ; q
+    AND     %r5,%r19,%r24                   ; t & 0xffffffff00000000;
+    EXTRD,U %r24,31,32,%r24                 ; ??? 
+    FLDD    -272(%r30),%fr7                 ; q
+    FLDD    -280(%r30),%fr8                 ; d
+    XMPYU   %fr8L,%fr7L,%fr10  
+    FSTD    %fr10,-256(%r30)   
+    XMPYU   %fr8L,%fr7R,%fr22  
+    FSTD    %fr22,-264(%r30)   
+    XMPYU   %fr8R,%fr7L,%fr11 
+    XMPYU   %fr8R,%fr7R,%fr23
+    FSTD    %fr11,-232(%r30)
+    FSTD    %fr23,-240(%r30)
+    LDD     -256(%r30),%r28
+    DEPD,Z  %r28,31,32,%r2 
+    LDD     -264(%r30),%r20
+    ADD,L   %r20,%r2,%r31   
+    LDD     -232(%r30),%r22 
+    DEPD,Z  %r22,31,32,%r22 
+    LDD     -240(%r30),%r21 
+    B       $00000024       ; enter loop  
+    ADD,L   %r21,%r22,%r23 
+
+$0000002A
+    LDO     -1(%r29),%r29   
+    SUB     %r23,%r8,%r23   
+$00000024
+    SUB     %r4,%r31,%r25   
+    AND     %r25,%r19,%r26  
+    CMPB,*<>,N      %r0,%r26,$00000046  ; (forward)
+    DEPD,Z  %r25,31,32,%r20 
+    OR      %r20,%r24,%r21  
+    CMPB,*<<,N  %r21,%r23,$0000002A ;(backward) 
+    SUB     %r31,%r6,%r31   
+;-------------Break path---------------------
+
+$00000046
+    DEPD,Z  %r23,31,32,%r25              ;tl
+    EXTRD,U %r23,31,32,%r26              ;t
+    AND     %r25,%r19,%r24               ;tl = (tl<<32)&0xfffffff0000000L
+    ADD,L   %r31,%r26,%r31               ;th += t; 
+    CMPCLR,*>>=     %r5,%r24,%r0         ;if (l<tl)
+    LDO     1(%r31),%r31                 ; th++;
+    CMPB,*<<=,N     %r31,%r4,$00000036   ;if (n < th) (forward)
+    LDO     -1(%r29),%r29                ;q--; 
+    ADD,L   %r4,%r3,%r4                  ;h += d;
+$00000036
+    ADDIB,=,N       -1,%r9,$D1 ;if (--count == 0) break (forward) 
+    SUB     %r5,%r24,%r28                ; l -= tl;
+    SUB     %r4,%r31,%r24                ; h -= th;
+    SHRPD   %r24,%r28,32,%r4             ; h = ((h<<32)|(l>>32));
+    DEPD,Z  %r29,31,32,%r10              ; ret = q<<32
+    b      $0000001C
+    DEPD,Z  %r28,31,32,%r5               ; l = l << 32 
+
+$D1
+    OR      %r10,%r29,%r28           ; ret |= q
+$D3
+    LDD     -368(%r30),%r2  
+$D0
+    LDD     -296(%r30),%r10 
+    LDD     -304(%r30),%r9  
+    LDD     -312(%r30),%r8  
+    LDD     -320(%r30),%r7  
+    LDD     -328(%r30),%r6  
+    LDD     -336(%r30),%r5  
+    LDD     -344(%r30),%r4  
+    BVE     (%r2)   
+        .EXIT
+    LDD,MB  -352(%r30),%r3 
+
+bn_div_err_case
+    MFIA    %r6     
+    ADDIL   L'bn_div_words-bn_div_err_case,%r6,%r1 
+    LDO     R'bn_div_words-bn_div_err_case(%r1),%r6  
+    ADDIL   LT'__iob,%r27,%r1       
+    LDD     RT'__iob(%r1),%r26      
+    ADDIL   L'C$4-bn_div_words,%r6,%r1    
+    LDO     R'C$4-bn_div_words(%r1),%r25  
+    LDO     64(%r26),%r26   
+    .CALL           ;in=24,25,26,29;out=28;
+    B,L     fprintf,%r2    
+    LDO     -48(%r30),%r29 
+    LDD     -288(%r30),%r27
+    .CALL           ;in=29;
+    B,L     abort,%r2      
+    LDO     -48(%r30),%r29 
+    LDD     -288(%r30),%r27
+    B       $D0         
+    LDD     -368(%r30),%r2  
+	.PROCEND	;in=24,25,26,29;out=28;
+
+;----------------------------------------------------------------------------
+;
+; Registers to hold 64-bit values to manipulate.  The "L" part
+; of the register corresponds to the upper 32-bits, while the "R"
+; part corresponds to the lower 32-bits
+; 
+; Note, that when using b6 and b7, the code must save these before
+; using them because they are callee save registers 
+; 
+;
+; Floating point registers to use to save values that
+; are manipulated.  These don't collide with ftemp1-6 and
+; are all caller save registers
+;
+a0        .reg %fr22
+a0L       .reg %fr22L
+a0R       .reg %fr22R
+
+a1        .reg %fr23
+a1L       .reg %fr23L
+a1R       .reg %fr23R
+
+a2        .reg %fr24
+a2L       .reg %fr24L
+a2R       .reg %fr24R
+
+a3        .reg %fr25
+a3L       .reg %fr25L
+a3R       .reg %fr25R
+
+a4        .reg %fr26
+a4L       .reg %fr26L
+a4R       .reg %fr26R
+
+a5        .reg %fr27
+a5L       .reg %fr27L
+a5R       .reg %fr27R
+
+a6        .reg %fr28
+a6L       .reg %fr28L
+a6R       .reg %fr28R
+
+a7        .reg %fr29
+a7L       .reg %fr29L
+a7R       .reg %fr29R
+
+b0        .reg %fr30
+b0L       .reg %fr30L
+b0R       .reg %fr30R
+
+b1        .reg %fr31
+b1L       .reg %fr31L
+b1R       .reg %fr31R
+
+;
+; Temporary floating point variables, these are all caller save
+; registers
+;
+ftemp1    .reg %fr4
+ftemp2    .reg %fr5
+ftemp3    .reg %fr6
+ftemp4    .reg %fr7
+
+;
+; The B set of registers when used.
+;
+
+b2        .reg %fr8
+b2L       .reg %fr8L
+b2R       .reg %fr8R
+
+b3        .reg %fr9
+b3L       .reg %fr9L
+b3R       .reg %fr9R
+
+b4        .reg %fr10
+b4L       .reg %fr10L
+b4R       .reg %fr10R
+
+b5        .reg %fr11
+b5L       .reg %fr11L
+b5R       .reg %fr11R
+
+b6        .reg %fr12
+b6L       .reg %fr12L
+b6R       .reg %fr12R
+
+b7        .reg %fr13
+b7L       .reg %fr13L
+b7R       .reg %fr13R
+
+c1           .reg %r21   ; only reg
+temp1        .reg %r20   ; only reg
+temp2        .reg %r19   ; only reg
+temp3        .reg %r31   ; only reg
+
+m1           .reg %r28   
+c2           .reg %r23   
+high_one     .reg %r1
+ht           .reg %r6
+lt           .reg %r5
+m            .reg %r4
+c3           .reg %r3
+
+SQR_ADD_C  .macro  A0L,A0R,C1,C2,C3
+    XMPYU   A0L,A0R,ftemp1       ; m
+    FSTD    ftemp1,-24(%sp)      ; store m
+
+    XMPYU   A0R,A0R,ftemp2       ; lt
+    FSTD    ftemp2,-16(%sp)      ; store lt
+
+    XMPYU   A0L,A0L,ftemp3       ; ht
+    FSTD    ftemp3,-8(%sp)       ; store ht
+
+    LDD     -24(%sp),m           ; load m
+    AND     m,high_mask,temp2    ; m & Mask
+    DEPD,Z  m,30,31,temp3        ; m << 32+1
+    LDD     -16(%sp),lt          ; lt
+
+    LDD     -8(%sp),ht           ; ht
+    EXTRD,U temp2,32,33,temp1    ; temp1 = m&Mask >> 32-1
+    ADD     temp3,lt,lt          ; lt = lt+m
+    ADD,L   ht,temp1,ht          ; ht += temp1
+    ADD,DC  ht,%r0,ht            ; ht++
+
+    ADD     C1,lt,C1             ; c1=c1+lt
+    ADD,DC  ht,%r0,ht            ; ht++
+
+    ADD     C2,ht,C2             ; c2=c2+ht
+    ADD,DC  C3,%r0,C3            ; c3++
+.endm
+
+SQR_ADD_C2 .macro  A0L,A0R,A1L,A1R,C1,C2,C3
+    XMPYU   A0L,A1R,ftemp1          ; m1 = bl*ht
+    FSTD    ftemp1,-16(%sp)         ;
+    XMPYU   A0R,A1L,ftemp2          ; m = bh*lt
+    FSTD    ftemp2,-8(%sp)          ;
+    XMPYU   A0R,A1R,ftemp3          ; lt = bl*lt
+    FSTD    ftemp3,-32(%sp)
+    XMPYU   A0L,A1L,ftemp4          ; ht = bh*ht
+    FSTD    ftemp4,-24(%sp)         ;
+
+    LDD     -8(%sp),m               ; r21 = m
+    LDD     -16(%sp),m1             ; r19 = m1
+    ADD,L   m,m1,m                  ; m+m1
+
+    DEPD,Z  m,31,32,temp3           ; (m+m1<<32)
+    LDD     -24(%sp),ht             ; r24 = ht
+
+    CMPCLR,*>>= m,m1,%r0            ; if (m < m1)
+    ADD,L   ht,high_one,ht          ; ht+=high_one
+
+    EXTRD,U m,31,32,temp1           ; m >> 32
+    LDD     -32(%sp),lt             ; lt
+    ADD,L   ht,temp1,ht             ; ht+= m>>32
+    ADD     lt,temp3,lt             ; lt = lt+m1
+    ADD,DC  ht,%r0,ht               ; ht++
+
+    ADD     ht,ht,ht                ; ht=ht+ht;
+    ADD,DC  C3,%r0,C3               ; add in carry (c3++)
+
+    ADD     lt,lt,lt                ; lt=lt+lt;
+    ADD,DC  ht,%r0,ht               ; add in carry (ht++)
+
+    ADD     C1,lt,C1                ; c1=c1+lt
+    ADD,DC,*NUV ht,%r0,ht           ; add in carry (ht++)
+    LDO     1(C3),C3              ; bump c3 if overflow,nullify otherwise
+
+    ADD     C2,ht,C2                ; c2 = c2 + ht
+    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
+.endm
+
+;
+;void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
+; arg0 = r_ptr
+; arg1 = a_ptr
+;
+
+bn_sqr_comba8
+	.PROC
+	.CALLINFO FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_sqr_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .ENTRY
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD     0(a_ptr),a0       
+    FLDD     8(a_ptr),a1       
+    FLDD    16(a_ptr),a2       
+    FLDD    24(a_ptr),a3       
+    FLDD    32(a_ptr),a4       
+    FLDD    40(a_ptr),a5       
+    FLDD    48(a_ptr),a6       
+    FLDD    56(a_ptr),a7       
+
+	SQR_ADD_C a0L,a0R,c1,c2,c3
+	STD     c1,0(r_ptr)          ; r[0] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
+	STD     c2,8(r_ptr)          ; r[1] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a1L,a1R,c3,c1,c2
+	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
+	STD     c3,16(r_ptr)            ; r[2] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
+	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
+	STD     c1,24(r_ptr)           ; r[3] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C a2L,a2R,c2,c3,c1
+	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
+	SQR_ADD_C2 a4L,a4R,a0L,a0R,c2,c3,c1
+	STD     c2,32(r_ptr)          ; r[4] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C2 a5L,a5R,a0L,a0R,c3,c1,c2
+	SQR_ADD_C2 a4L,a4R,a1L,a1R,c3,c1,c2
+	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
+	STD     c3,40(r_ptr)          ; r[5] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C a3L,a3R,c1,c2,c3
+	SQR_ADD_C2 a4L,a4R,a2L,a2R,c1,c2,c3
+	SQR_ADD_C2 a5L,a5R,a1L,a1R,c1,c2,c3
+	SQR_ADD_C2 a6L,a6R,a0L,a0R,c1,c2,c3
+	STD     c1,48(r_ptr)          ; r[6] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a7L,a7R,a0L,a0R,c2,c3,c1
+	SQR_ADD_C2 a6L,a6R,a1L,a1R,c2,c3,c1
+	SQR_ADD_C2 a5L,a5R,a2L,a2R,c2,c3,c1
+	SQR_ADD_C2 a4L,a4R,a3L,a3R,c2,c3,c1
+	STD     c2,56(r_ptr)          ; r[7] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a4L,a4R,c3,c1,c2
+	SQR_ADD_C2 a5L,a5R,a3L,a3R,c3,c1,c2
+	SQR_ADD_C2 a6L,a6R,a2L,a2R,c3,c1,c2
+	SQR_ADD_C2 a7L,a7R,a1L,a1R,c3,c1,c2
+	STD     c3,64(r_ptr)          ; r[8] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C2 a7L,a7R,a2L,a2R,c1,c2,c3
+	SQR_ADD_C2 a6L,a6R,a3L,a3R,c1,c2,c3
+	SQR_ADD_C2 a5L,a5R,a4L,a4R,c1,c2,c3
+	STD     c1,72(r_ptr)          ; r[9] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C a5L,a5R,c2,c3,c1
+	SQR_ADD_C2 a6L,a6R,a4L,a4R,c2,c3,c1
+	SQR_ADD_C2 a7L,a7R,a3L,a3R,c2,c3,c1
+	STD     c2,80(r_ptr)          ; r[10] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C2 a7L,a7R,a4L,a4R,c3,c1,c2
+	SQR_ADD_C2 a6L,a6R,a5L,a5R,c3,c1,c2
+	STD     c3,88(r_ptr)          ; r[11] = c3;
+	COPY    %r0,c3
+	
+	SQR_ADD_C a6L,a6R,c1,c2,c3
+	SQR_ADD_C2 a7L,a7R,a5L,a5R,c1,c2,c3
+	STD     c1,96(r_ptr)          ; r[12] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a7L,a7R,a6L,a6R,c2,c3,c1
+	STD     c2,104(r_ptr)         ; r[13] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a7L,a7R,c3,c1,c2
+	STD     c3, 112(r_ptr)       ; r[14] = c3
+	STD     c1, 120(r_ptr)       ; r[15] = c1
+
+    .EXIT
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+;-----------------------------------------------------------------------------
+;
+;void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
+; arg0 = r_ptr
+; arg1 = a_ptr
+;
+
+bn_sqr_comba4
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_sqr_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD     0(a_ptr),a0       
+    FLDD     8(a_ptr),a1       
+    FLDD    16(a_ptr),a2       
+    FLDD    24(a_ptr),a3       
+    FLDD    32(a_ptr),a4       
+    FLDD    40(a_ptr),a5       
+    FLDD    48(a_ptr),a6       
+    FLDD    56(a_ptr),a7       
+
+	SQR_ADD_C a0L,a0R,c1,c2,c3
+
+	STD     c1,0(r_ptr)          ; r[0] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
+
+	STD     c2,8(r_ptr)          ; r[1] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C a1L,a1R,c3,c1,c2
+	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
+
+	STD     c3,16(r_ptr)            ; r[2] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
+	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
+
+	STD     c1,24(r_ptr)           ; r[3] = c1;
+	COPY    %r0,c1
+
+	SQR_ADD_C a2L,a2R,c2,c3,c1
+	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
+
+	STD     c2,32(r_ptr)           ; r[4] = c2;
+	COPY    %r0,c2
+
+	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
+	STD     c3,40(r_ptr)           ; r[5] = c3;
+	COPY    %r0,c3
+
+	SQR_ADD_C a3L,a3R,c1,c2,c3
+	STD     c1,48(r_ptr)           ; r[6] = c1;
+	STD     c2,56(r_ptr)           ; r[7] = c2;
+
+    .EXIT
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+
+;---------------------------------------------------------------------------
+
+MUL_ADD_C  .macro  A0L,A0R,B0L,B0R,C1,C2,C3
+    XMPYU   A0L,B0R,ftemp1        ; m1 = bl*ht
+    FSTD    ftemp1,-16(%sp)       ;
+    XMPYU   A0R,B0L,ftemp2        ; m = bh*lt
+    FSTD    ftemp2,-8(%sp)        ;
+    XMPYU   A0R,B0R,ftemp3        ; lt = bl*lt
+    FSTD    ftemp3,-32(%sp)
+    XMPYU   A0L,B0L,ftemp4        ; ht = bh*ht
+    FSTD    ftemp4,-24(%sp)       ;
+
+    LDD     -8(%sp),m             ; r21 = m
+    LDD     -16(%sp),m1           ; r19 = m1
+    ADD,L   m,m1,m                ; m+m1
+
+    DEPD,Z  m,31,32,temp3         ; (m+m1<<32)
+    LDD     -24(%sp),ht           ; r24 = ht
+
+    CMPCLR,*>>= m,m1,%r0          ; if (m < m1)
+    ADD,L   ht,high_one,ht        ; ht+=high_one
+
+    EXTRD,U m,31,32,temp1         ; m >> 32
+    LDD     -32(%sp),lt           ; lt
+    ADD,L   ht,temp1,ht           ; ht+= m>>32
+    ADD     lt,temp3,lt           ; lt = lt+m1
+    ADD,DC  ht,%r0,ht             ; ht++
+
+    ADD     C1,lt,C1              ; c1=c1+lt
+    ADD,DC  ht,%r0,ht             ; bump c3 if overflow,nullify otherwise
+
+    ADD     C2,ht,C2              ; c2 = c2 + ht
+    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
+.endm
+
+
+;
+;void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+; arg0 = r_ptr
+; arg1 = a_ptr
+; arg2 = b_ptr
+;
+
+bn_mul_comba8
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_mul_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+    FSTD    %fr12,32(%sp)       ; save r6
+    FSTD    %fr13,40(%sp)       ; save r7
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD      0(a_ptr),a0       
+    FLDD      8(a_ptr),a1       
+    FLDD     16(a_ptr),a2       
+    FLDD     24(a_ptr),a3       
+    FLDD     32(a_ptr),a4       
+    FLDD     40(a_ptr),a5       
+    FLDD     48(a_ptr),a6       
+    FLDD     56(a_ptr),a7       
+
+    FLDD      0(b_ptr),b0       
+    FLDD      8(b_ptr),b1       
+    FLDD     16(b_ptr),b2       
+    FLDD     24(b_ptr),b3       
+    FLDD     32(b_ptr),b4       
+    FLDD     40(b_ptr),b5       
+    FLDD     48(b_ptr),b6       
+    FLDD     56(b_ptr),b7       
+
+	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
+	STD       c1,0(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
+	STD       c2,8(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
+	STD       c3,16(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
+	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
+	STD       c1,24(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a4L,a4R,b0L,b0R,c2,c3,c1
+	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
+	MUL_ADD_C a0L,a0R,b4L,b4R,c2,c3,c1
+	STD       c2,32(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a0L,a0R,b5L,b5R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b4L,b4R,c3,c1,c2
+	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
+	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
+	MUL_ADD_C a4L,a4R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a5L,a5R,b0L,b0R,c3,c1,c2
+	STD       c3,40(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a6L,a6R,b0L,b0R,c1,c2,c3
+	MUL_ADD_C a5L,a5R,b1L,b1R,c1,c2,c3
+	MUL_ADD_C a4L,a4R,b2L,b2R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a2L,a2R,b4L,b4R,c1,c2,c3
+	MUL_ADD_C a1L,a1R,b5L,b5R,c1,c2,c3
+	MUL_ADD_C a0L,a0R,b6L,b6R,c1,c2,c3
+	STD       c1,48(r_ptr)
+	COPY      %r0,c1
+	
+	MUL_ADD_C a0L,a0R,b7L,b7R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b6L,b6R,c2,c3,c1
+	MUL_ADD_C a2L,a2R,b5L,b5R,c2,c3,c1
+	MUL_ADD_C a3L,a3R,b4L,b4R,c2,c3,c1
+	MUL_ADD_C a4L,a4R,b3L,b3R,c2,c3,c1
+	MUL_ADD_C a5L,a5R,b2L,b2R,c2,c3,c1
+	MUL_ADD_C a6L,a6R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a7L,a7R,b0L,b0R,c2,c3,c1
+	STD       c2,56(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a7L,a7R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a6L,a6R,b2L,b2R,c3,c1,c2
+	MUL_ADD_C a5L,a5R,b3L,b3R,c3,c1,c2
+	MUL_ADD_C a4L,a4R,b4L,b4R,c3,c1,c2
+	MUL_ADD_C a3L,a3R,b5L,b5R,c3,c1,c2
+	MUL_ADD_C a2L,a2R,b6L,b6R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b7L,b7R,c3,c1,c2
+	STD       c3,64(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a2L,a2R,b7L,b7R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b6L,b6R,c1,c2,c3
+	MUL_ADD_C a4L,a4R,b5L,b5R,c1,c2,c3
+	MUL_ADD_C a5L,a5R,b4L,b4R,c1,c2,c3
+	MUL_ADD_C a6L,a6R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a7L,a7R,b2L,b2R,c1,c2,c3
+	STD       c1,72(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a7L,a7R,b3L,b3R,c2,c3,c1
+	MUL_ADD_C a6L,a6R,b4L,b4R,c2,c3,c1
+	MUL_ADD_C a5L,a5R,b5L,b5R,c2,c3,c1
+	MUL_ADD_C a4L,a4R,b6L,b6R,c2,c3,c1
+	MUL_ADD_C a3L,a3R,b7L,b7R,c2,c3,c1
+	STD       c2,80(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a4L,a4R,b7L,b7R,c3,c1,c2
+	MUL_ADD_C a5L,a5R,b6L,b6R,c3,c1,c2
+	MUL_ADD_C a6L,a6R,b5L,b5R,c3,c1,c2
+	MUL_ADD_C a7L,a7R,b4L,b4R,c3,c1,c2
+	STD       c3,88(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a7L,a7R,b5L,b5R,c1,c2,c3
+	MUL_ADD_C a6L,a6R,b6L,b6R,c1,c2,c3
+	MUL_ADD_C a5L,a5R,b7L,b7R,c1,c2,c3
+	STD       c1,96(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a6L,a6R,b7L,b7R,c2,c3,c1
+	MUL_ADD_C a7L,a7R,b6L,b6R,c2,c3,c1
+	STD       c2,104(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a7L,a7R,b7L,b7R,c3,c1,c2
+	STD       c3,112(r_ptr)
+	STD       c1,120(r_ptr)
+
+    .EXIT
+    FLDD    -88(%sp),%fr13 
+    FLDD    -96(%sp),%fr12 
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+;-----------------------------------------------------------------------------
+;
+;void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+; arg0 = r_ptr
+; arg1 = a_ptr
+; arg2 = b_ptr
+;
+
+bn_mul_comba4
+	.proc
+	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
+	.EXPORT	bn_mul_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
+    .entry
+	.align 64
+
+    STD     %r3,0(%sp)          ; save r3
+    STD     %r4,8(%sp)          ; save r4
+    STD     %r5,16(%sp)         ; save r5
+    STD     %r6,24(%sp)         ; save r6
+    FSTD    %fr12,32(%sp)       ; save r6
+    FSTD    %fr13,40(%sp)       ; save r7
+
+	;
+	; Zero out carries
+	;
+	COPY     %r0,c1
+	COPY     %r0,c2
+	COPY     %r0,c3
+
+	LDO      128(%sp),%sp       ; bump stack
+    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
+
+	;
+	; Load up all of the values we are going to use
+	;
+    FLDD      0(a_ptr),a0       
+    FLDD      8(a_ptr),a1       
+    FLDD     16(a_ptr),a2       
+    FLDD     24(a_ptr),a3       
+
+    FLDD      0(b_ptr),b0       
+    FLDD      8(b_ptr),b1       
+    FLDD     16(b_ptr),b2       
+    FLDD     24(b_ptr),b3       
+
+	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
+	STD       c1,0(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
+	STD       c2,8(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
+	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
+	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
+	STD       c3,16(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
+	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
+	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
+	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
+	STD       c1,24(r_ptr)
+	COPY      %r0,c1
+
+	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
+	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
+	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
+	STD       c2,32(r_ptr)
+	COPY      %r0,c2
+
+	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
+	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
+	STD       c3,40(r_ptr)
+	COPY      %r0,c3
+
+	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
+	STD       c1,48(r_ptr)
+	STD       c2,56(r_ptr)
+
+    .EXIT
+    FLDD    -88(%sp),%fr13 
+    FLDD    -96(%sp),%fr12 
+    LDD     -104(%sp),%r6        ; restore r6
+    LDD     -112(%sp),%r5        ; restore r5
+    LDD     -120(%sp),%r4        ; restore r4
+    BVE     (%rp)
+    LDD,MB  -128(%sp),%r3
+
+	.PROCEND	
+
+
+	.SPACE	$TEXT$
+	.SUBSPA	$CODE$
+	.SPACE	$PRIVATE$,SORT=16
+	.IMPORT	$global$,DATA
+	.SPACE	$TEXT$
+	.SUBSPA	$CODE$
+	.SUBSPA	$LIT$,ACCESS=0x2c
+C$4
+	.ALIGN	8
+	.STRINGZ	"Division would overflow (%d)\n"
+	.END
diff --git a/app/openssl/crypto/bn/asm/ppc-mont.pl b/app/openssl/crypto/bn/asm/ppc-mont.pl
new file mode 100644
index 00000000..7849eae9
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/ppc-mont.pl
@@ -0,0 +1,323 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# April 2006
+
+# "Teaser" Montgomery multiplication module for PowerPC. It's possible
+# to gain a bit more by modulo-scheduling outer loop, then dedicated
+# squaring procedure should give further 20% and code can be adapted
+# for 32-bit application running on 64-bit CPU. As for the latter.
+# It won't be able to achieve "native" 64-bit performance, because in
+# 32-bit application context every addc instruction will have to be
+# expanded as addc, twice right shift by 32 and finally adde, etc.
+# So far RSA *sign* performance improvement over pre-bn_mul_mont asm
+# for 64-bit application running on PPC970/G5 is:
+#
+# 512-bit	+65%	
+# 1024-bit	+35%
+# 2048-bit	+18%
+# 4096-bit	+4%
+
+$flavour = shift;
+
+if ($flavour =~ /32/) {
+	$BITS=	32;
+	$BNSZ=	$BITS/8;
+	$SIZE_T=4;
+	$RZONE=	224;
+	$FRAME=	$SIZE_T*16;
+
+	$LD=	"lwz";		# load
+	$LDU=	"lwzu";		# load and update
+	$LDX=	"lwzx";		# load indexed
+	$ST=	"stw";		# store
+	$STU=	"stwu";		# store and update
+	$STX=	"stwx";		# store indexed
+	$STUX=	"stwux";	# store indexed and update
+	$UMULL=	"mullw";	# unsigned multiply low
+	$UMULH=	"mulhwu";	# unsigned multiply high
+	$UCMP=	"cmplw";	# unsigned compare
+	$SHRI=	"srwi";		# unsigned shift right by immediate	
+	$PUSH=	$ST;
+	$POP=	$LD;
+} elsif ($flavour =~ /64/) {
+	$BITS=	64;
+	$BNSZ=	$BITS/8;
+	$SIZE_T=8;
+	$RZONE=	288;
+	$FRAME=	$SIZE_T*16;
+
+	# same as above, but 64-bit mnemonics...
+	$LD=	"ld";		# load
+	$LDU=	"ldu";		# load and update
+	$LDX=	"ldx";		# load indexed
+	$ST=	"std";		# store
+	$STU=	"stdu";		# store and update
+	$STX=	"stdx";		# store indexed
+	$STUX=	"stdux";	# store indexed and update
+	$UMULL=	"mulld";	# unsigned multiply low
+	$UMULH=	"mulhdu";	# unsigned multiply high
+	$UCMP=	"cmpld";	# unsigned compare
+	$SHRI=	"srdi";		# unsigned shift right by immediate	
+	$PUSH=	$ST;
+	$POP=	$LD;
+} else { die "nonsense $flavour"; }
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$sp="r1";
+$toc="r2";
+$rp="r3";	$ovf="r3";
+$ap="r4";
+$bp="r5";
+$np="r6";
+$n0="r7";
+$num="r8";
+$rp="r9";	# $rp is reassigned
+$aj="r10";
+$nj="r11";
+$tj="r12";
+# non-volatile registers
+$i="r14";
+$j="r15";
+$tp="r16";
+$m0="r17";
+$m1="r18";
+$lo0="r19";
+$hi0="r20";
+$lo1="r21";
+$hi1="r22";
+$alo="r23";
+$ahi="r24";
+$nlo="r25";
+#
+$nhi="r0";
+
+$code=<<___;
+.machine "any"
+.text
+
+.globl	.bn_mul_mont
+.align	4
+.bn_mul_mont:
+	cmpwi	$num,4
+	mr	$rp,r3		; $rp is reassigned
+	li	r3,0
+	bltlr
+
+	slwi	$num,$num,`log($BNSZ)/log(2)`
+	li	$tj,-4096
+	addi	$ovf,$num,`$FRAME+$RZONE`
+	subf	$ovf,$ovf,$sp	; $sp-$ovf
+	and	$ovf,$ovf,$tj	; minimize TLB usage
+	subf	$ovf,$sp,$ovf	; $ovf-$sp
+	srwi	$num,$num,`log($BNSZ)/log(2)`
+	$STUX	$sp,$sp,$ovf
+
+	$PUSH	r14,`4*$SIZE_T`($sp)
+	$PUSH	r15,`5*$SIZE_T`($sp)
+	$PUSH	r16,`6*$SIZE_T`($sp)
+	$PUSH	r17,`7*$SIZE_T`($sp)
+	$PUSH	r18,`8*$SIZE_T`($sp)
+	$PUSH	r19,`9*$SIZE_T`($sp)
+	$PUSH	r20,`10*$SIZE_T`($sp)
+	$PUSH	r21,`11*$SIZE_T`($sp)
+	$PUSH	r22,`12*$SIZE_T`($sp)
+	$PUSH	r23,`13*$SIZE_T`($sp)
+	$PUSH	r24,`14*$SIZE_T`($sp)
+	$PUSH	r25,`15*$SIZE_T`($sp)
+
+	$LD	$n0,0($n0)	; pull n0[0] value
+	addi	$num,$num,-2	; adjust $num for counter register
+
+	$LD	$m0,0($bp)	; m0=bp[0]
+	$LD	$aj,0($ap)	; ap[0]
+	addi	$tp,$sp,$FRAME
+	$UMULL	$lo0,$aj,$m0	; ap[0]*bp[0]
+	$UMULH	$hi0,$aj,$m0
+
+	$LD	$aj,$BNSZ($ap)	; ap[1]
+	$LD	$nj,0($np)	; np[0]
+
+	$UMULL	$m1,$lo0,$n0	; "tp[0]"*n0
+
+	$UMULL	$alo,$aj,$m0	; ap[1]*bp[0]
+	$UMULH	$ahi,$aj,$m0
+
+	$UMULL	$lo1,$nj,$m1	; np[0]*m1
+	$UMULH	$hi1,$nj,$m1
+	$LD	$nj,$BNSZ($np)	; np[1]
+	addc	$lo1,$lo1,$lo0
+	addze	$hi1,$hi1
+
+	$UMULL	$nlo,$nj,$m1	; np[1]*m1
+	$UMULH	$nhi,$nj,$m1
+
+	mtctr	$num
+	li	$j,`2*$BNSZ`
+.align	4
+L1st:
+	$LDX	$aj,$ap,$j	; ap[j]
+	addc	$lo0,$alo,$hi0
+	$LDX	$nj,$np,$j	; np[j]
+	addze	$hi0,$ahi
+	$UMULL	$alo,$aj,$m0	; ap[j]*bp[0]
+	addc	$lo1,$nlo,$hi1
+	$UMULH	$ahi,$aj,$m0
+	addze	$hi1,$nhi
+	$UMULL	$nlo,$nj,$m1	; np[j]*m1
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[0]
+	$UMULH	$nhi,$nj,$m1
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+
+	addi	$j,$j,$BNSZ	; j++
+	addi	$tp,$tp,$BNSZ	; tp++
+	bdnz-	L1st
+;L1st
+	addc	$lo0,$alo,$hi0
+	addze	$hi0,$ahi
+
+	addc	$lo1,$nlo,$hi1
+	addze	$hi1,$nhi
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[0]
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+
+	li	$ovf,0
+	addc	$hi1,$hi1,$hi0
+	addze	$ovf,$ovf	; upmost overflow bit
+	$ST	$hi1,$BNSZ($tp)
+
+	li	$i,$BNSZ
+.align	4
+Louter:
+	$LDX	$m0,$bp,$i	; m0=bp[i]
+	$LD	$aj,0($ap)	; ap[0]
+	addi	$tp,$sp,$FRAME
+	$LD	$tj,$FRAME($sp)	; tp[0]
+	$UMULL	$lo0,$aj,$m0	; ap[0]*bp[i]
+	$UMULH	$hi0,$aj,$m0
+	$LD	$aj,$BNSZ($ap)	; ap[1]
+	$LD	$nj,0($np)	; np[0]
+	addc	$lo0,$lo0,$tj	; ap[0]*bp[i]+tp[0]
+	$UMULL	$alo,$aj,$m0	; ap[j]*bp[i]
+	addze	$hi0,$hi0
+	$UMULL	$m1,$lo0,$n0	; tp[0]*n0
+	$UMULH	$ahi,$aj,$m0
+	$UMULL	$lo1,$nj,$m1	; np[0]*m1
+	$UMULH	$hi1,$nj,$m1
+	$LD	$nj,$BNSZ($np)	; np[1]
+	addc	$lo1,$lo1,$lo0
+	$UMULL	$nlo,$nj,$m1	; np[1]*m1
+	addze	$hi1,$hi1
+	$UMULH	$nhi,$nj,$m1
+
+	mtctr	$num
+	li	$j,`2*$BNSZ`
+.align	4
+Linner:
+	$LDX	$aj,$ap,$j	; ap[j]
+	addc	$lo0,$alo,$hi0
+	$LD	$tj,$BNSZ($tp)	; tp[j]
+	addze	$hi0,$ahi
+	$LDX	$nj,$np,$j	; np[j]
+	addc	$lo1,$nlo,$hi1
+	$UMULL	$alo,$aj,$m0	; ap[j]*bp[i]
+	addze	$hi1,$nhi
+	$UMULH	$ahi,$aj,$m0
+	addc	$lo0,$lo0,$tj	; ap[j]*bp[i]+tp[j]
+	$UMULL	$nlo,$nj,$m1	; np[j]*m1
+	addze	$hi0,$hi0
+	$UMULH	$nhi,$nj,$m1
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[i]+tp[j]
+	addi	$j,$j,$BNSZ	; j++
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+	addi	$tp,$tp,$BNSZ	; tp++
+	bdnz-	Linner
+;Linner
+	$LD	$tj,$BNSZ($tp)	; tp[j]
+	addc	$lo0,$alo,$hi0
+	addze	$hi0,$ahi
+	addc	$lo0,$lo0,$tj	; ap[j]*bp[i]+tp[j]
+	addze	$hi0,$hi0
+
+	addc	$lo1,$nlo,$hi1
+	addze	$hi1,$nhi
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[i]+tp[j]
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+
+	addic	$ovf,$ovf,-1	; move upmost overflow to XER[CA]
+	li	$ovf,0
+	adde	$hi1,$hi1,$hi0
+	addze	$ovf,$ovf
+	$ST	$hi1,$BNSZ($tp)
+;
+	slwi	$tj,$num,`log($BNSZ)/log(2)`
+	$UCMP	$i,$tj
+	addi	$i,$i,$BNSZ
+	ble-	Louter
+
+	addi	$num,$num,2	; restore $num
+	subfc	$j,$j,$j	; j=0 and "clear" XER[CA]
+	addi	$tp,$sp,$FRAME
+	mtctr	$num
+
+.align	4
+Lsub:	$LDX	$tj,$tp,$j
+	$LDX	$nj,$np,$j
+	subfe	$aj,$nj,$tj	; tp[j]-np[j]
+	$STX	$aj,$rp,$j
+	addi	$j,$j,$BNSZ
+	bdnz-	Lsub
+
+	li	$j,0
+	mtctr	$num
+	subfe	$ovf,$j,$ovf	; handle upmost overflow bit
+	and	$ap,$tp,$ovf
+	andc	$np,$rp,$ovf
+	or	$ap,$ap,$np	; ap=borrow?tp:rp
+
+.align	4
+Lcopy:				; copy or in-place refresh
+	$LDX	$tj,$ap,$j
+	$STX	$tj,$rp,$j
+	$STX	$j,$tp,$j	; zap at once
+	addi	$j,$j,$BNSZ
+	bdnz-	Lcopy
+
+	$POP	r14,`4*$SIZE_T`($sp)
+	$POP	r15,`5*$SIZE_T`($sp)
+	$POP	r16,`6*$SIZE_T`($sp)
+	$POP	r17,`7*$SIZE_T`($sp)
+	$POP	r18,`8*$SIZE_T`($sp)
+	$POP	r19,`9*$SIZE_T`($sp)
+	$POP	r20,`10*$SIZE_T`($sp)
+	$POP	r21,`11*$SIZE_T`($sp)
+	$POP	r22,`12*$SIZE_T`($sp)
+	$POP	r23,`13*$SIZE_T`($sp)
+	$POP	r24,`14*$SIZE_T`($sp)
+	$POP	r25,`15*$SIZE_T`($sp)
+	$POP	$sp,0($sp)
+	li	r3,1
+	blr
+	.long	0
+.asciz  "Montgomery Multiplication for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>"
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/ppc.pl b/app/openssl/crypto/bn/asm/ppc.pl
new file mode 100644
index 00000000..37c65d35
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/ppc.pl
@@ -0,0 +1,1981 @@
+#!/usr/bin/env perl
+#
+# Implemented as a Perl wrapper as we want to support several different
+# architectures with single file. We pick up the target based on the
+# file name we are asked to generate.
+#
+# It should be noted though that this perl code is nothing like
+# <openssl>/crypto/perlasm/x86*. In this case perl is used pretty much
+# as pre-processor to cover for platform differences in name decoration,
+# linker tables, 32-/64-bit instruction sets...
+#
+# As you might know there're several PowerPC ABI in use. Most notably
+# Linux and AIX use different 32-bit ABIs. Good news are that these ABIs
+# are similar enough to implement leaf(!) functions, which would be ABI
+# neutral. And that's what you find here: ABI neutral leaf functions.
+# In case you wonder what that is...
+#
+#       AIX performance
+#
+#	MEASUREMENTS WITH cc ON a 200 MhZ PowerPC 604e.
+#
+#	The following is the performance of 32-bit compiler
+#	generated code:
+#
+#	OpenSSL 0.9.6c 21 dec 2001
+#	built on: Tue Jun 11 11:06:51 EDT 2002
+#	options:bn(64,32) ...
+#compiler: cc -DTHREADS  -DAIX -DB_ENDIAN -DBN_LLONG -O3
+#                  sign    verify    sign/s verify/s
+#rsa  512 bits   0.0098s   0.0009s    102.0   1170.6
+#rsa 1024 bits   0.0507s   0.0026s     19.7    387.5
+#rsa 2048 bits   0.3036s   0.0085s      3.3    117.1
+#rsa 4096 bits   2.0040s   0.0299s      0.5     33.4
+#dsa  512 bits   0.0087s   0.0106s    114.3     94.5
+#dsa 1024 bits   0.0256s   0.0313s     39.0     32.0	
+#
+#	Same bechmark with this assembler code:
+#
+#rsa  512 bits   0.0056s   0.0005s    178.6   2049.2
+#rsa 1024 bits   0.0283s   0.0015s     35.3    674.1
+#rsa 2048 bits   0.1744s   0.0050s      5.7    201.2
+#rsa 4096 bits   1.1644s   0.0179s      0.9     55.7
+#dsa  512 bits   0.0052s   0.0062s    191.6    162.0
+#dsa 1024 bits   0.0149s   0.0180s     67.0     55.5
+#
+#	Number of operations increases by at almost 75%
+#
+#	Here are performance numbers for 64-bit compiler
+#	generated code:
+#
+#	OpenSSL 0.9.6g [engine] 9 Aug 2002
+#	built on: Fri Apr 18 16:59:20 EDT 2003
+#	options:bn(64,64) ...
+#	compiler: cc -DTHREADS -D_REENTRANT -q64 -DB_ENDIAN -O3
+#                  sign    verify    sign/s verify/s
+#rsa  512 bits   0.0028s   0.0003s    357.1   3844.4
+#rsa 1024 bits   0.0148s   0.0008s     67.5   1239.7
+#rsa 2048 bits   0.0963s   0.0028s     10.4    353.0
+#rsa 4096 bits   0.6538s   0.0102s      1.5     98.1
+#dsa  512 bits   0.0026s   0.0032s    382.5    313.7
+#dsa 1024 bits   0.0081s   0.0099s    122.8    100.6
+#
+#	Same benchmark with this assembler code:
+#
+#rsa  512 bits   0.0020s   0.0002s    510.4   6273.7
+#rsa 1024 bits   0.0088s   0.0005s    114.1   2128.3
+#rsa 2048 bits   0.0540s   0.0016s     18.5    622.5
+#rsa 4096 bits   0.3700s   0.0058s      2.7    171.0
+#dsa  512 bits   0.0016s   0.0020s    610.7    507.1
+#dsa 1024 bits   0.0047s   0.0058s    212.5    173.2
+#	
+#	Again, performance increases by at about 75%
+#
+#       Mac OS X, Apple G5 1.8GHz (Note this is 32 bit code)
+#       OpenSSL 0.9.7c 30 Sep 2003
+#
+#       Original code.
+#
+#rsa  512 bits   0.0011s   0.0001s    906.1  11012.5
+#rsa 1024 bits   0.0060s   0.0003s    166.6   3363.1
+#rsa 2048 bits   0.0370s   0.0010s     27.1    982.4
+#rsa 4096 bits   0.2426s   0.0036s      4.1    280.4
+#dsa  512 bits   0.0010s   0.0012s   1038.1    841.5
+#dsa 1024 bits   0.0030s   0.0037s    329.6    269.7
+#dsa 2048 bits   0.0101s   0.0127s     98.9     78.6
+#
+#       Same benchmark with this assembler code:
+#
+#rsa  512 bits   0.0007s   0.0001s   1416.2  16645.9
+#rsa 1024 bits   0.0036s   0.0002s    274.4   5380.6
+#rsa 2048 bits   0.0222s   0.0006s     45.1   1589.5
+#rsa 4096 bits   0.1469s   0.0022s      6.8    449.6
+#dsa  512 bits   0.0006s   0.0007s   1664.2   1376.2
+#dsa 1024 bits   0.0018s   0.0023s    545.0    442.2
+#dsa 2048 bits   0.0061s   0.0075s    163.5    132.8
+#
+#        Performance increase of ~60%
+#
+#	If you have comments or suggestions to improve code send
+#	me a note at schari@us.ibm.com
+#
+
+$flavour = shift;
+
+if ($flavour =~ /32/) {
+	$BITS=	32;
+	$BNSZ=	$BITS/8;
+	$ISA=	"\"ppc\"";
+
+	$LD=	"lwz";		# load
+	$LDU=	"lwzu";		# load and update
+	$ST=	"stw";		# store
+	$STU=	"stwu";		# store and update
+	$UMULL=	"mullw";	# unsigned multiply low
+	$UMULH=	"mulhwu";	# unsigned multiply high
+	$UDIV=	"divwu";	# unsigned divide
+	$UCMPI=	"cmplwi";	# unsigned compare with immediate
+	$UCMP=	"cmplw";	# unsigned compare
+	$CNTLZ=	"cntlzw";	# count leading zeros
+	$SHL=	"slw";		# shift left
+	$SHR=	"srw";		# unsigned shift right
+	$SHRI=	"srwi";		# unsigned shift right by immediate	
+	$SHLI=	"slwi";		# shift left by immediate
+	$CLRU=	"clrlwi";	# clear upper bits
+	$INSR=	"insrwi";	# insert right
+	$ROTL=	"rotlwi";	# rotate left by immediate
+	$TR=	"tw";		# conditional trap
+} elsif ($flavour =~ /64/) {
+	$BITS=	64;
+	$BNSZ=	$BITS/8;
+	$ISA=	"\"ppc64\"";
+
+	# same as above, but 64-bit mnemonics...
+	$LD=	"ld";		# load
+	$LDU=	"ldu";		# load and update
+	$ST=	"std";		# store
+	$STU=	"stdu";		# store and update
+	$UMULL=	"mulld";	# unsigned multiply low
+	$UMULH=	"mulhdu";	# unsigned multiply high
+	$UDIV=	"divdu";	# unsigned divide
+	$UCMPI=	"cmpldi";	# unsigned compare with immediate
+	$UCMP=	"cmpld";	# unsigned compare
+	$CNTLZ=	"cntlzd";	# count leading zeros
+	$SHL=	"sld";		# shift left
+	$SHR=	"srd";		# unsigned shift right
+	$SHRI=	"srdi";		# unsigned shift right by immediate	
+	$SHLI=	"sldi";		# shift left by immediate
+	$CLRU=	"clrldi";	# clear upper bits
+	$INSR=	"insrdi";	# insert right 
+	$ROTL=	"rotldi";	# rotate left by immediate
+	$TR=	"td";		# conditional trap
+} else { die "nonsense $flavour"; }
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$data=<<EOF;
+#--------------------------------------------------------------------
+#
+#
+#
+#
+#	File:		ppc32.s
+#
+#	Created by:	Suresh Chari
+#			IBM Thomas J. Watson Research Library
+#			Hawthorne, NY
+#
+#
+#	Description:	Optimized assembly routines for OpenSSL crypto
+#			on the 32 bitPowerPC platform.
+#
+#
+#	Version History
+#
+#	2. Fixed bn_add,bn_sub and bn_div_words, added comments,
+#	   cleaned up code. Also made a single version which can
+#	   be used for both the AIX and Linux compilers. See NOTE
+#	   below.
+#				12/05/03		Suresh Chari
+#			(with lots of help from)        Andy Polyakov
+##	
+#	1. Initial version	10/20/02		Suresh Chari
+#
+#
+#	The following file works for the xlc,cc
+#	and gcc compilers.
+#
+#	NOTE:	To get the file to link correctly with the gcc compiler
+#	        you have to change the names of the routines and remove
+#		the first .(dot) character. This should automatically
+#		be done in the build process.
+#
+#	Hand optimized assembly code for the following routines
+#	
+#	bn_sqr_comba4
+#	bn_sqr_comba8
+#	bn_mul_comba4
+#	bn_mul_comba8
+#	bn_sub_words
+#	bn_add_words
+#	bn_div_words
+#	bn_sqr_words
+#	bn_mul_words
+#	bn_mul_add_words
+#
+#	NOTE:	It is possible to optimize this code more for
+#	specific PowerPC or Power architectures. On the Northstar
+#	architecture the optimizations in this file do
+#	 NOT provide much improvement.
+#
+#	If you have comments or suggestions to improve code send
+#	me a note at schari\@us.ibm.com
+#
+#--------------------------------------------------------------------------
+#
+#	Defines to be used in the assembly code.
+#	
+#.set r0,0	# we use it as storage for value of 0
+#.set SP,1	# preserved
+#.set RTOC,2	# preserved 
+#.set r3,3	# 1st argument/return value
+#.set r4,4	# 2nd argument/volatile register
+#.set r5,5	# 3rd argument/volatile register
+#.set r6,6	# ...
+#.set r7,7
+#.set r8,8
+#.set r9,9
+#.set r10,10
+#.set r11,11
+#.set r12,12
+#.set r13,13	# not used, nor any other "below" it...
+
+#	Declare function names to be global
+#	NOTE:	For gcc these names MUST be changed to remove
+#	        the first . i.e. for example change ".bn_sqr_comba4"
+#		to "bn_sqr_comba4". This should be automatically done
+#		in the build.
+	
+	.globl	.bn_sqr_comba4
+	.globl	.bn_sqr_comba8
+	.globl	.bn_mul_comba4
+	.globl	.bn_mul_comba8
+	.globl	.bn_sub_words
+	.globl	.bn_add_words
+	.globl	.bn_div_words
+	.globl	.bn_sqr_words
+	.globl	.bn_mul_words
+	.globl	.bn_mul_add_words
+	
+# .text section
+	
+	.machine	"any"
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_sqr_comba4" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+
+.align	4
+.bn_sqr_comba4:
+#
+# Optimized version of bn_sqr_comba4.
+#
+# void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
+# r3 contains r
+# r4 contains a
+#
+# Freely use registers r5,r6,r7,r8,r9,r10,r11 as follows:	
+# 
+# r5,r6 are the two BN_ULONGs being multiplied.
+# r7,r8 are the results of the 32x32 giving 64 bit multiply.
+# r9,r10, r11 are the equivalents of c1,c2, c3.
+# Here's the assembly
+#
+#
+	xor		r0,r0,r0		# set r0 = 0. Used in the addze
+						# instructions below
+	
+						#sqr_add_c(a,0,c1,c2,c3)
+	$LD		r5,`0*$BNSZ`(r4)		
+	$UMULL		r9,r5,r5		
+	$UMULH		r10,r5,r5		#in first iteration. No need
+						#to add since c1=c2=c3=0.
+						# Note c3(r11) is NOT set to 0
+						# but will be.
+
+	$ST		r9,`0*$BNSZ`(r3)	# r[0]=c1;
+						# sqr_add_c2(a,1,0,c2,c3,c1);
+	$LD		r6,`1*$BNSZ`(r4)		
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+					
+	addc		r7,r7,r7		# compute (r7,r8)=2*(r7,r8)
+	adde		r8,r8,r8
+	addze		r9,r0			# catch carry if any.
+						# r9= r0(=0) and carry 
+	
+	addc		r10,r7,r10		# now add to temp result.
+	addze		r11,r8                  # r8 added to r11 which is 0 
+	addze		r9,r9
+	
+	$ST		r10,`1*$BNSZ`(r3)	#r[1]=c2; 
+						#sqr_add_c(a,1,c3,c1,c2)
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r0
+						#sqr_add_c2(a,2,0,c3,c1,c2)
+	$LD		r6,`2*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r7,r7,r7
+	adde		r8,r8,r8
+	addze		r10,r10
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	$ST		r11,`2*$BNSZ`(r3)	#r[2]=c3 
+						#sqr_add_c2(a,3,0,c1,c2,c3);
+	$LD		r6,`3*$BNSZ`(r4)		
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r7,r7,r7
+	adde		r8,r8,r8
+	addze		r11,r0
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+						#sqr_add_c2(a,2,1,c1,c2,c3);
+	$LD		r5,`1*$BNSZ`(r4)
+	$LD		r6,`2*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r7,r7,r7
+	adde		r8,r8,r8
+	addze		r11,r11
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	$ST		r9,`3*$BNSZ`(r3)	#r[3]=c1
+						#sqr_add_c(a,2,c2,c3,c1);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r0
+						#sqr_add_c2(a,3,1,c2,c3,c1);
+	$LD		r6,`3*$BNSZ`(r4)		
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r7,r7,r7
+	adde		r8,r8,r8
+	addze		r9,r9
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	$ST		r10,`4*$BNSZ`(r3)	#r[4]=c2
+						#sqr_add_c2(a,3,2,c3,c1,c2);
+	$LD		r5,`2*$BNSZ`(r4)		
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r7,r7,r7
+	adde		r8,r8,r8
+	addze		r10,r0
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	$ST		r11,`5*$BNSZ`(r3)	#r[5] = c3
+						#sqr_add_c(a,3,c1,c2,c3);
+	$UMULL		r7,r6,r6		
+	$UMULH		r8,r6,r6
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+
+	$ST		r9,`6*$BNSZ`(r3)	#r[6]=c1
+	$ST		r10,`7*$BNSZ`(r3)	#r[7]=c2
+	blr
+	.long	0x00000000
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_sqr_comba8" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+	
+.align	4
+.bn_sqr_comba8:
+#
+# This is an optimized version of the bn_sqr_comba8 routine.
+# Tightly uses the adde instruction
+#
+#
+# void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
+# r3 contains r
+# r4 contains a
+#
+# Freely use registers r5,r6,r7,r8,r9,r10,r11 as follows:	
+# 
+# r5,r6 are the two BN_ULONGs being multiplied.
+# r7,r8 are the results of the 32x32 giving 64 bit multiply.
+# r9,r10, r11 are the equivalents of c1,c2, c3.
+#
+# Possible optimization of loading all 8 longs of a into registers
+# doesnt provide any speedup
+# 
+
+	xor		r0,r0,r0		#set r0 = 0.Used in addze
+						#instructions below.
+
+						#sqr_add_c(a,0,c1,c2,c3);
+	$LD		r5,`0*$BNSZ`(r4)
+	$UMULL		r9,r5,r5		#1st iteration:	no carries.
+	$UMULH		r10,r5,r5
+	$ST		r9,`0*$BNSZ`(r3)	# r[0]=c1;
+						#sqr_add_c2(a,1,0,c2,c3,c1);
+	$LD		r6,`1*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6	
+	
+	addc		r10,r7,r10		#add the two register number
+	adde		r11,r8,r0 		# (r8,r7) to the three register
+	addze		r9,r0			# number (r9,r11,r10).NOTE:r0=0
+	
+	addc		r10,r7,r10		#add the two register number
+	adde		r11,r8,r11 		# (r8,r7) to the three register
+	addze		r9,r9			# number (r9,r11,r10).
+	
+	$ST		r10,`1*$BNSZ`(r3)	# r[1]=c2
+				
+						#sqr_add_c(a,1,c3,c1,c2);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r0
+						#sqr_add_c2(a,2,0,c3,c1,c2);
+	$LD		r6,`2*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	
+	$ST		r11,`2*$BNSZ`(r3)	#r[2]=c3
+						#sqr_add_c2(a,3,0,c1,c2,c3);
+	$LD		r6,`3*$BNSZ`(r4)	#r6 = a[3]. r5 is already a[0].
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r0
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+						#sqr_add_c2(a,2,1,c1,c2,c3);
+	$LD		r5,`1*$BNSZ`(r4)
+	$LD		r6,`2*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	
+	$ST		r9,`3*$BNSZ`(r3)	#r[3]=c1;
+						#sqr_add_c(a,2,c2,c3,c1);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r0
+						#sqr_add_c2(a,3,1,c2,c3,c1);
+	$LD		r6,`3*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+						#sqr_add_c2(a,4,0,c2,c3,c1);
+	$LD		r5,`0*$BNSZ`(r4)
+	$LD		r6,`4*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	$ST		r10,`4*$BNSZ`(r3)	#r[4]=c2;
+						#sqr_add_c2(a,5,0,c3,c1,c2);
+	$LD		r6,`5*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r0
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+						#sqr_add_c2(a,4,1,c3,c1,c2);
+	$LD		r5,`1*$BNSZ`(r4)
+	$LD		r6,`4*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+						#sqr_add_c2(a,3,2,c3,c1,c2);
+	$LD		r5,`2*$BNSZ`(r4)
+	$LD		r6,`3*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	$ST		r11,`5*$BNSZ`(r3)	#r[5]=c3;
+						#sqr_add_c(a,3,c1,c2,c3);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r0
+						#sqr_add_c2(a,4,2,c1,c2,c3);
+	$LD		r6,`4*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+						#sqr_add_c2(a,5,1,c1,c2,c3);
+	$LD		r5,`1*$BNSZ`(r4)
+	$LD		r6,`5*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+						#sqr_add_c2(a,6,0,c1,c2,c3);
+	$LD		r5,`0*$BNSZ`(r4)
+	$LD		r6,`6*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	$ST		r9,`6*$BNSZ`(r3)	#r[6]=c1;
+						#sqr_add_c2(a,7,0,c2,c3,c1);
+	$LD		r6,`7*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r0
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+						#sqr_add_c2(a,6,1,c2,c3,c1);
+	$LD		r5,`1*$BNSZ`(r4)
+	$LD		r6,`6*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+						#sqr_add_c2(a,5,2,c2,c3,c1);
+	$LD		r5,`2*$BNSZ`(r4)
+	$LD		r6,`5*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+						#sqr_add_c2(a,4,3,c2,c3,c1);
+	$LD		r5,`3*$BNSZ`(r4)
+	$LD		r6,`4*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	$ST		r10,`7*$BNSZ`(r3)	#r[7]=c2;
+						#sqr_add_c(a,4,c3,c1,c2);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r0
+						#sqr_add_c2(a,5,3,c3,c1,c2);
+	$LD		r6,`5*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+						#sqr_add_c2(a,6,2,c3,c1,c2);
+	$LD		r5,`2*$BNSZ`(r4)
+	$LD		r6,`6*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+						#sqr_add_c2(a,7,1,c3,c1,c2);
+	$LD		r5,`1*$BNSZ`(r4)
+	$LD		r6,`7*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	$ST		r11,`8*$BNSZ`(r3)	#r[8]=c3;
+						#sqr_add_c2(a,7,2,c1,c2,c3);
+	$LD		r5,`2*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r0
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+						#sqr_add_c2(a,6,3,c1,c2,c3);
+	$LD		r5,`3*$BNSZ`(r4)
+	$LD		r6,`6*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+						#sqr_add_c2(a,5,4,c1,c2,c3);
+	$LD		r5,`4*$BNSZ`(r4)
+	$LD		r6,`5*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	$ST		r9,`9*$BNSZ`(r3)	#r[9]=c1;
+						#sqr_add_c(a,5,c2,c3,c1);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r0
+						#sqr_add_c2(a,6,4,c2,c3,c1);
+	$LD		r6,`6*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+						#sqr_add_c2(a,7,3,c2,c3,c1);
+	$LD		r5,`3*$BNSZ`(r4)
+	$LD		r6,`7*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	$ST		r10,`10*$BNSZ`(r3)	#r[10]=c2;
+						#sqr_add_c2(a,7,4,c3,c1,c2);
+	$LD		r5,`4*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r0
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+						#sqr_add_c2(a,6,5,c3,c1,c2);
+	$LD		r5,`5*$BNSZ`(r4)
+	$LD		r6,`6*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	addze		r10,r10
+	$ST		r11,`11*$BNSZ`(r3)	#r[11]=c3;
+						#sqr_add_c(a,6,c1,c2,c3);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r0
+						#sqr_add_c2(a,7,5,c1,c2,c3)
+	$LD		r6,`7*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	addc		r9,r7,r9
+	adde		r10,r8,r10
+	addze		r11,r11
+	$ST		r9,`12*$BNSZ`(r3)	#r[12]=c1;
+	
+						#sqr_add_c2(a,7,6,c2,c3,c1)
+	$LD		r5,`6*$BNSZ`(r4)
+	$UMULL		r7,r5,r6
+	$UMULH		r8,r5,r6
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r0
+	addc		r10,r7,r10
+	adde		r11,r8,r11
+	addze		r9,r9
+	$ST		r10,`13*$BNSZ`(r3)	#r[13]=c2;
+						#sqr_add_c(a,7,c3,c1,c2);
+	$UMULL		r7,r6,r6
+	$UMULH		r8,r6,r6
+	addc		r11,r7,r11
+	adde		r9,r8,r9
+	$ST		r11,`14*$BNSZ`(r3)	#r[14]=c3;
+	$ST		r9, `15*$BNSZ`(r3)	#r[15]=c1;
+
+
+	blr
+
+	.long	0x00000000
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_mul_comba4" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+
+.align	4
+.bn_mul_comba4:
+#
+# This is an optimized version of the bn_mul_comba4 routine.
+#
+# void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+# r3 contains r
+# r4 contains a
+# r5 contains b
+# r6, r7 are the 2 BN_ULONGs being multiplied.
+# r8, r9 are the results of the 32x32 giving 64 multiply.
+# r10, r11, r12 are the equivalents of c1, c2, and c3.
+#
+	xor	r0,r0,r0		#r0=0. Used in addze below.
+					#mul_add_c(a[0],b[0],c1,c2,c3);
+	$LD	r6,`0*$BNSZ`(r4)		
+	$LD	r7,`0*$BNSZ`(r5)		
+	$UMULL	r10,r6,r7		
+	$UMULH	r11,r6,r7		
+	$ST	r10,`0*$BNSZ`(r3)	#r[0]=c1
+					#mul_add_c(a[0],b[1],c2,c3,c1);
+	$LD	r7,`1*$BNSZ`(r5)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r8,r11
+	adde	r12,r9,r0
+	addze	r10,r0
+					#mul_add_c(a[1],b[0],c2,c3,c1);
+	$LD	r6, `1*$BNSZ`(r4)		
+	$LD	r7, `0*$BNSZ`(r5)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r8,r11
+	adde	r12,r9,r12
+	addze	r10,r10
+	$ST	r11,`1*$BNSZ`(r3)	#r[1]=c2
+					#mul_add_c(a[2],b[0],c3,c1,c2);
+	$LD	r6,`2*$BNSZ`(r4)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r8,r12
+	adde	r10,r9,r10
+	addze	r11,r0
+					#mul_add_c(a[1],b[1],c3,c1,c2);
+	$LD	r6,`1*$BNSZ`(r4)		
+	$LD	r7,`1*$BNSZ`(r5)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r8,r12
+	adde	r10,r9,r10
+	addze	r11,r11
+					#mul_add_c(a[0],b[2],c3,c1,c2);
+	$LD	r6,`0*$BNSZ`(r4)		
+	$LD	r7,`2*$BNSZ`(r5)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r8,r12
+	adde	r10,r9,r10
+	addze	r11,r11
+	$ST	r12,`2*$BNSZ`(r3)	#r[2]=c3
+					#mul_add_c(a[0],b[3],c1,c2,c3);
+	$LD	r7,`3*$BNSZ`(r5)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r8,r10
+	adde	r11,r9,r11
+	addze	r12,r0
+					#mul_add_c(a[1],b[2],c1,c2,c3);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r8,r10
+	adde	r11,r9,r11
+	addze	r12,r12
+					#mul_add_c(a[2],b[1],c1,c2,c3);
+	$LD	r6,`2*$BNSZ`(r4)
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r8,r10
+	adde	r11,r9,r11
+	addze	r12,r12
+					#mul_add_c(a[3],b[0],c1,c2,c3);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`0*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r8,r10
+	adde	r11,r9,r11
+	addze	r12,r12
+	$ST	r10,`3*$BNSZ`(r3)	#r[3]=c1
+					#mul_add_c(a[3],b[1],c2,c3,c1);
+	$LD	r7,`1*$BNSZ`(r5)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r8,r11
+	adde	r12,r9,r12
+	addze	r10,r0
+					#mul_add_c(a[2],b[2],c2,c3,c1);
+	$LD	r6,`2*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r8,r11
+	adde	r12,r9,r12
+	addze	r10,r10
+					#mul_add_c(a[1],b[3],c2,c3,c1);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r8,r11
+	adde	r12,r9,r12
+	addze	r10,r10
+	$ST	r11,`4*$BNSZ`(r3)	#r[4]=c2
+					#mul_add_c(a[2],b[3],c3,c1,c2);
+	$LD	r6,`2*$BNSZ`(r4)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r8,r12
+	adde	r10,r9,r10
+	addze	r11,r0
+					#mul_add_c(a[3],b[2],c3,c1,c2);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r4)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r8,r12
+	adde	r10,r9,r10
+	addze	r11,r11
+	$ST	r12,`5*$BNSZ`(r3)	#r[5]=c3
+					#mul_add_c(a[3],b[3],c1,c2,c3);
+	$LD	r7,`3*$BNSZ`(r5)		
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r8,r10
+	adde	r11,r9,r11
+
+	$ST	r10,`6*$BNSZ`(r3)	#r[6]=c1
+	$ST	r11,`7*$BNSZ`(r3)	#r[7]=c2
+	blr
+	.long	0x00000000
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_mul_comba8" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+	
+.align	4
+.bn_mul_comba8:
+#
+# Optimized version of the bn_mul_comba8 routine.
+#
+# void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+# r3 contains r
+# r4 contains a
+# r5 contains b
+# r6, r7 are the 2 BN_ULONGs being multiplied.
+# r8, r9 are the results of the 32x32 giving 64 multiply.
+# r10, r11, r12 are the equivalents of c1, c2, and c3.
+#
+	xor	r0,r0,r0		#r0=0. Used in addze below.
+	
+					#mul_add_c(a[0],b[0],c1,c2,c3);
+	$LD	r6,`0*$BNSZ`(r4)	#a[0]
+	$LD	r7,`0*$BNSZ`(r5)	#b[0]
+	$UMULL	r10,r6,r7
+	$UMULH	r11,r6,r7
+	$ST	r10,`0*$BNSZ`(r3)	#r[0]=c1;
+					#mul_add_c(a[0],b[1],c2,c3,c1);
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	addze	r12,r9			# since we didnt set r12 to zero before.
+	addze	r10,r0
+					#mul_add_c(a[1],b[0],c2,c3,c1);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`0*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+	$ST	r11,`1*$BNSZ`(r3)	#r[1]=c2;
+					#mul_add_c(a[2],b[0],c3,c1,c2);
+	$LD	r6,`2*$BNSZ`(r4)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r0
+					#mul_add_c(a[1],b[1],c3,c1,c2);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[0],b[2],c3,c1,c2);
+	$LD	r6,`0*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+	$ST	r12,`2*$BNSZ`(r3)	#r[2]=c3;
+					#mul_add_c(a[0],b[3],c1,c2,c3);
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r0
+					#mul_add_c(a[1],b[2],c1,c2,c3);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+		
+					#mul_add_c(a[2],b[1],c1,c2,c3);
+	$LD	r6,`2*$BNSZ`(r4)
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[3],b[0],c1,c2,c3);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`0*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+	$ST	r10,`3*$BNSZ`(r3)	#r[3]=c1;
+					#mul_add_c(a[4],b[0],c2,c3,c1);
+	$LD	r6,`4*$BNSZ`(r4)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r0
+					#mul_add_c(a[3],b[1],c2,c3,c1);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[2],b[2],c2,c3,c1);
+	$LD	r6,`2*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[1],b[3],c2,c3,c1);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[0],b[4],c2,c3,c1);
+	$LD	r6,`0*$BNSZ`(r4)
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+	$ST	r11,`4*$BNSZ`(r3)	#r[4]=c2;
+					#mul_add_c(a[0],b[5],c3,c1,c2);
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r0
+					#mul_add_c(a[1],b[4],c3,c1,c2);
+	$LD	r6,`1*$BNSZ`(r4)		
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[2],b[3],c3,c1,c2);
+	$LD	r6,`2*$BNSZ`(r4)		
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[3],b[2],c3,c1,c2);
+	$LD	r6,`3*$BNSZ`(r4)		
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[4],b[1],c3,c1,c2);
+	$LD	r6,`4*$BNSZ`(r4)		
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[5],b[0],c3,c1,c2);
+	$LD	r6,`5*$BNSZ`(r4)		
+	$LD	r7,`0*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+	$ST	r12,`5*$BNSZ`(r3)	#r[5]=c3;
+					#mul_add_c(a[6],b[0],c1,c2,c3);
+	$LD	r6,`6*$BNSZ`(r4)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r0
+					#mul_add_c(a[5],b[1],c1,c2,c3);
+	$LD	r6,`5*$BNSZ`(r4)
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[4],b[2],c1,c2,c3);
+	$LD	r6,`4*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[3],b[3],c1,c2,c3);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[2],b[4],c1,c2,c3);
+	$LD	r6,`2*$BNSZ`(r4)
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[1],b[5],c1,c2,c3);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[0],b[6],c1,c2,c3);
+	$LD	r6,`0*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+	$ST	r10,`6*$BNSZ`(r3)	#r[6]=c1;
+					#mul_add_c(a[0],b[7],c2,c3,c1);
+	$LD	r7,`7*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r0
+					#mul_add_c(a[1],b[6],c2,c3,c1);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[2],b[5],c2,c3,c1);
+	$LD	r6,`2*$BNSZ`(r4)
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[3],b[4],c2,c3,c1);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[4],b[3],c2,c3,c1);
+	$LD	r6,`4*$BNSZ`(r4)
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[5],b[2],c2,c3,c1);
+	$LD	r6,`5*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[6],b[1],c2,c3,c1);
+	$LD	r6,`6*$BNSZ`(r4)
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[7],b[0],c2,c3,c1);
+	$LD	r6,`7*$BNSZ`(r4)
+	$LD	r7,`0*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+	$ST	r11,`7*$BNSZ`(r3)	#r[7]=c2;
+					#mul_add_c(a[7],b[1],c3,c1,c2);
+	$LD	r7,`1*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r0
+					#mul_add_c(a[6],b[2],c3,c1,c2);
+	$LD	r6,`6*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[5],b[3],c3,c1,c2);
+	$LD	r6,`5*$BNSZ`(r4)
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[4],b[4],c3,c1,c2);
+	$LD	r6,`4*$BNSZ`(r4)
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[3],b[5],c3,c1,c2);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[2],b[6],c3,c1,c2);
+	$LD	r6,`2*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[1],b[7],c3,c1,c2);
+	$LD	r6,`1*$BNSZ`(r4)
+	$LD	r7,`7*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+	$ST	r12,`8*$BNSZ`(r3)	#r[8]=c3;
+					#mul_add_c(a[2],b[7],c1,c2,c3);
+	$LD	r6,`2*$BNSZ`(r4)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r0
+					#mul_add_c(a[3],b[6],c1,c2,c3);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[4],b[5],c1,c2,c3);
+	$LD	r6,`4*$BNSZ`(r4)
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[5],b[4],c1,c2,c3);
+	$LD	r6,`5*$BNSZ`(r4)
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[6],b[3],c1,c2,c3);
+	$LD	r6,`6*$BNSZ`(r4)
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[7],b[2],c1,c2,c3);
+	$LD	r6,`7*$BNSZ`(r4)
+	$LD	r7,`2*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+	$ST	r10,`9*$BNSZ`(r3)	#r[9]=c1;
+					#mul_add_c(a[7],b[3],c2,c3,c1);
+	$LD	r7,`3*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r0
+					#mul_add_c(a[6],b[4],c2,c3,c1);
+	$LD	r6,`6*$BNSZ`(r4)
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[5],b[5],c2,c3,c1);
+	$LD	r6,`5*$BNSZ`(r4)
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[4],b[6],c2,c3,c1);
+	$LD	r6,`4*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+					#mul_add_c(a[3],b[7],c2,c3,c1);
+	$LD	r6,`3*$BNSZ`(r4)
+	$LD	r7,`7*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+	$ST	r11,`10*$BNSZ`(r3)	#r[10]=c2;
+					#mul_add_c(a[4],b[7],c3,c1,c2);
+	$LD	r6,`4*$BNSZ`(r4)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r0
+					#mul_add_c(a[5],b[6],c3,c1,c2);
+	$LD	r6,`5*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[6],b[5],c3,c1,c2);
+	$LD	r6,`6*$BNSZ`(r4)
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+					#mul_add_c(a[7],b[4],c3,c1,c2);
+	$LD	r6,`7*$BNSZ`(r4)
+	$LD	r7,`4*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	addze	r11,r11
+	$ST	r12,`11*$BNSZ`(r3)	#r[11]=c3;
+					#mul_add_c(a[7],b[5],c1,c2,c3);
+	$LD	r7,`5*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r0
+					#mul_add_c(a[6],b[6],c1,c2,c3);
+	$LD	r6,`6*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+					#mul_add_c(a[5],b[7],c1,c2,c3);
+	$LD	r6,`5*$BNSZ`(r4)
+	$LD	r7,`7*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r10,r10,r8
+	adde	r11,r11,r9
+	addze	r12,r12
+	$ST	r10,`12*$BNSZ`(r3)	#r[12]=c1;
+					#mul_add_c(a[6],b[7],c2,c3,c1);
+	$LD	r6,`6*$BNSZ`(r4)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r0
+					#mul_add_c(a[7],b[6],c2,c3,c1);
+	$LD	r6,`7*$BNSZ`(r4)
+	$LD	r7,`6*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r11,r11,r8
+	adde	r12,r12,r9
+	addze	r10,r10
+	$ST	r11,`13*$BNSZ`(r3)	#r[13]=c2;
+					#mul_add_c(a[7],b[7],c3,c1,c2);
+	$LD	r7,`7*$BNSZ`(r5)
+	$UMULL	r8,r6,r7
+	$UMULH	r9,r6,r7
+	addc	r12,r12,r8
+	adde	r10,r10,r9
+	$ST	r12,`14*$BNSZ`(r3)	#r[14]=c3;
+	$ST	r10,`15*$BNSZ`(r3)	#r[15]=c1;
+	blr
+	.long	0x00000000
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_sub_words" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+#
+.align	4
+.bn_sub_words:
+#
+#	Handcoded version of bn_sub_words
+#
+#BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+#
+#	r3 = r
+#	r4 = a
+#	r5 = b
+#	r6 = n
+#
+#       Note:	No loop unrolling done since this is not a performance
+#               critical loop.
+
+	xor	r0,r0,r0	#set r0 = 0
+#
+#	check for r6 = 0 AND set carry bit.
+#
+	subfc.	r7,r0,r6        # If r6 is 0 then result is 0.
+				# if r6 > 0 then result !=0
+				# In either case carry bit is set.
+	beq	Lppcasm_sub_adios
+	addi	r4,r4,-$BNSZ
+	addi	r3,r3,-$BNSZ
+	addi	r5,r5,-$BNSZ
+	mtctr	r6
+Lppcasm_sub_mainloop:	
+	$LDU	r7,$BNSZ(r4)
+	$LDU	r8,$BNSZ(r5)
+	subfe	r6,r8,r7	# r6 = r7+carry bit + onescomplement(r8)
+				# if carry = 1 this is r7-r8. Else it
+				# is r7-r8 -1 as we need.
+	$STU	r6,$BNSZ(r3)
+	bdnz-	Lppcasm_sub_mainloop
+Lppcasm_sub_adios:	
+	subfze	r3,r0		# if carry bit is set then r3 = 0 else -1
+	andi.	r3,r3,1         # keep only last bit.
+	blr
+	.long	0x00000000
+
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_add_words" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+
+.align	4
+.bn_add_words:
+#
+#	Handcoded version of bn_add_words
+#
+#BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+#
+#	r3 = r
+#	r4 = a
+#	r5 = b
+#	r6 = n
+#
+#       Note:	No loop unrolling done since this is not a performance
+#               critical loop.
+
+	xor	r0,r0,r0
+#
+#	check for r6 = 0. Is this needed?
+#
+	addic.	r6,r6,0		#test r6 and clear carry bit.
+	beq	Lppcasm_add_adios
+	addi	r4,r4,-$BNSZ
+	addi	r3,r3,-$BNSZ
+	addi	r5,r5,-$BNSZ
+	mtctr	r6
+Lppcasm_add_mainloop:	
+	$LDU	r7,$BNSZ(r4)
+	$LDU	r8,$BNSZ(r5)
+	adde	r8,r7,r8
+	$STU	r8,$BNSZ(r3)
+	bdnz-	Lppcasm_add_mainloop
+Lppcasm_add_adios:	
+	addze	r3,r0			#return carry bit.
+	blr
+	.long	0x00000000
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_div_words" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+
+.align	4
+.bn_div_words:
+#
+#	This is a cleaned up version of code generated by
+#	the AIX compiler. The only optimization is to use
+#	the PPC instruction to count leading zeros instead
+#	of call to num_bits_word. Since this was compiled
+#	only at level -O2 we can possibly squeeze it more?
+#	
+#	r3 = h
+#	r4 = l
+#	r5 = d
+	
+	$UCMPI	0,r5,0			# compare r5 and 0
+	bne	Lppcasm_div1		# proceed if d!=0
+	li	r3,-1			# d=0 return -1
+	blr
+Lppcasm_div1:
+	xor	r0,r0,r0		#r0=0
+	li	r8,$BITS
+	$CNTLZ.	r7,r5			#r7 = num leading 0s in d.
+	beq	Lppcasm_div2		#proceed if no leading zeros
+	subf	r8,r7,r8		#r8 = BN_num_bits_word(d)
+	$SHR.	r9,r3,r8		#are there any bits above r8'th?
+	$TR	16,r9,r0		#if there're, signal to dump core...
+Lppcasm_div2:
+	$UCMP	0,r3,r5			#h>=d?
+	blt	Lppcasm_div3		#goto Lppcasm_div3 if not
+	subf	r3,r5,r3		#h-=d ; 
+Lppcasm_div3:				#r7 = BN_BITS2-i. so r7=i
+	cmpi	0,0,r7,0		# is (i == 0)?
+	beq	Lppcasm_div4
+	$SHL	r3,r3,r7		# h = (h<< i)
+	$SHR	r8,r4,r8		# r8 = (l >> BN_BITS2 -i)
+	$SHL	r5,r5,r7		# d<<=i
+	or	r3,r3,r8		# h = (h<<i)|(l>>(BN_BITS2-i))
+	$SHL	r4,r4,r7		# l <<=i
+Lppcasm_div4:
+	$SHRI	r9,r5,`$BITS/2`		# r9 = dh
+					# dl will be computed when needed
+					# as it saves registers.
+	li	r6,2			#r6=2
+	mtctr	r6			#counter will be in count.
+Lppcasm_divouterloop: 
+	$SHRI	r8,r3,`$BITS/2`		#r8 = (h>>BN_BITS4)
+	$SHRI	r11,r4,`$BITS/2`	#r11= (l&BN_MASK2h)>>BN_BITS4
+					# compute here for innerloop.
+	$UCMP	0,r8,r9			# is (h>>BN_BITS4)==dh
+	bne	Lppcasm_div5		# goto Lppcasm_div5 if not
+
+	li	r8,-1
+	$CLRU	r8,r8,`$BITS/2`		#q = BN_MASK2l 
+	b	Lppcasm_div6
+Lppcasm_div5:
+	$UDIV	r8,r3,r9		#q = h/dh
+Lppcasm_div6:
+	$UMULL	r12,r9,r8		#th = q*dh
+	$CLRU	r10,r5,`$BITS/2`	#r10=dl
+	$UMULL	r6,r8,r10		#tl = q*dl
+	
+Lppcasm_divinnerloop:
+	subf	r10,r12,r3		#t = h -th
+	$SHRI	r7,r10,`$BITS/2`	#r7= (t &BN_MASK2H), sort of...
+	addic.	r7,r7,0			#test if r7 == 0. used below.
+					# now want to compute
+					# r7 = (t<<BN_BITS4)|((l&BN_MASK2h)>>BN_BITS4)
+					# the following 2 instructions do that
+	$SHLI	r7,r10,`$BITS/2`	# r7 = (t<<BN_BITS4)
+	or	r7,r7,r11		# r7|=((l&BN_MASK2h)>>BN_BITS4)
+	$UCMP	cr1,r6,r7		# compare (tl <= r7)
+	bne	Lppcasm_divinnerexit
+	ble	cr1,Lppcasm_divinnerexit
+	addi	r8,r8,-1		#q--
+	subf	r12,r9,r12		#th -=dh
+	$CLRU	r10,r5,`$BITS/2`	#r10=dl. t is no longer needed in loop.
+	subf	r6,r10,r6		#tl -=dl
+	b	Lppcasm_divinnerloop
+Lppcasm_divinnerexit:
+	$SHRI	r10,r6,`$BITS/2`	#t=(tl>>BN_BITS4)
+	$SHLI	r11,r6,`$BITS/2`	#tl=(tl<<BN_BITS4)&BN_MASK2h;
+	$UCMP	cr1,r4,r11		# compare l and tl
+	add	r12,r12,r10		# th+=t
+	bge	cr1,Lppcasm_div7	# if (l>=tl) goto Lppcasm_div7
+	addi	r12,r12,1		# th++
+Lppcasm_div7:
+	subf	r11,r11,r4		#r11=l-tl
+	$UCMP	cr1,r3,r12		#compare h and th
+	bge	cr1,Lppcasm_div8	#if (h>=th) goto Lppcasm_div8
+	addi	r8,r8,-1		# q--
+	add	r3,r5,r3		# h+=d
+Lppcasm_div8:
+	subf	r12,r12,r3		#r12 = h-th
+	$SHLI	r4,r11,`$BITS/2`	#l=(l&BN_MASK2l)<<BN_BITS4
+					# want to compute
+					# h = ((h<<BN_BITS4)|(l>>BN_BITS4))&BN_MASK2
+					# the following 2 instructions will do this.
+	$INSR	r11,r12,`$BITS/2`,`$BITS/2`	# r11 is the value we want rotated $BITS/2.
+	$ROTL	r3,r11,`$BITS/2`	# rotate by $BITS/2 and store in r3
+	bdz	Lppcasm_div9		#if (count==0) break ;
+	$SHLI	r0,r8,`$BITS/2`		#ret =q<<BN_BITS4
+	b	Lppcasm_divouterloop
+Lppcasm_div9:
+	or	r3,r8,r0
+	blr
+	.long	0x00000000
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_sqr_words" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+.align	4
+.bn_sqr_words:
+#
+#	Optimized version of bn_sqr_words
+#
+#	void bn_sqr_words(BN_ULONG *r, BN_ULONG *a, int n)
+#
+#	r3 = r
+#	r4 = a
+#	r5 = n
+#
+#	r6 = a[i].
+#	r7,r8 = product.
+#
+#	No unrolling done here. Not performance critical.
+
+	addic.	r5,r5,0			#test r5.
+	beq	Lppcasm_sqr_adios
+	addi	r4,r4,-$BNSZ
+	addi	r3,r3,-$BNSZ
+	mtctr	r5
+Lppcasm_sqr_mainloop:	
+					#sqr(r[0],r[1],a[0]);
+	$LDU	r6,$BNSZ(r4)
+	$UMULL	r7,r6,r6
+	$UMULH  r8,r6,r6
+	$STU	r7,$BNSZ(r3)
+	$STU	r8,$BNSZ(r3)
+	bdnz-	Lppcasm_sqr_mainloop
+Lppcasm_sqr_adios:	
+	blr
+	.long	0x00000000
+
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_mul_words" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+
+.align	4	
+.bn_mul_words:
+#
+# BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+#
+# r3 = rp
+# r4 = ap
+# r5 = num
+# r6 = w
+	xor	r0,r0,r0
+	xor	r12,r12,r12		# used for carry
+	rlwinm.	r7,r5,30,2,31		# num >> 2
+	beq	Lppcasm_mw_REM
+	mtctr	r7
+Lppcasm_mw_LOOP:	
+					#mul(rp[0],ap[0],w,c1);
+	$LD	r8,`0*$BNSZ`(r4)
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	addc	r9,r9,r12
+	#addze	r10,r10			#carry is NOT ignored.
+					#will be taken care of
+					#in second spin below
+					#using adde.
+	$ST	r9,`0*$BNSZ`(r3)
+					#mul(rp[1],ap[1],w,c1);
+	$LD	r8,`1*$BNSZ`(r4)	
+	$UMULL	r11,r6,r8
+	$UMULH  r12,r6,r8
+	adde	r11,r11,r10
+	#addze	r12,r12
+	$ST	r11,`1*$BNSZ`(r3)
+					#mul(rp[2],ap[2],w,c1);
+	$LD	r8,`2*$BNSZ`(r4)
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	adde	r9,r9,r12
+	#addze	r10,r10
+	$ST	r9,`2*$BNSZ`(r3)
+					#mul_add(rp[3],ap[3],w,c1);
+	$LD	r8,`3*$BNSZ`(r4)
+	$UMULL	r11,r6,r8
+	$UMULH  r12,r6,r8
+	adde	r11,r11,r10
+	addze	r12,r12			#this spin we collect carry into
+					#r12
+	$ST	r11,`3*$BNSZ`(r3)
+	
+	addi	r3,r3,`4*$BNSZ`
+	addi	r4,r4,`4*$BNSZ`
+	bdnz-	Lppcasm_mw_LOOP
+
+Lppcasm_mw_REM:
+	andi.	r5,r5,0x3
+	beq	Lppcasm_mw_OVER
+					#mul(rp[0],ap[0],w,c1);
+	$LD	r8,`0*$BNSZ`(r4)
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	addc	r9,r9,r12
+	addze	r10,r10
+	$ST	r9,`0*$BNSZ`(r3)
+	addi	r12,r10,0
+	
+	addi	r5,r5,-1
+	cmpli	0,0,r5,0
+	beq	Lppcasm_mw_OVER
+
+	
+					#mul(rp[1],ap[1],w,c1);
+	$LD	r8,`1*$BNSZ`(r4)	
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	addc	r9,r9,r12
+	addze	r10,r10
+	$ST	r9,`1*$BNSZ`(r3)
+	addi	r12,r10,0
+	
+	addi	r5,r5,-1
+	cmpli	0,0,r5,0
+	beq	Lppcasm_mw_OVER
+	
+					#mul_add(rp[2],ap[2],w,c1);
+	$LD	r8,`2*$BNSZ`(r4)
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	addc	r9,r9,r12
+	addze	r10,r10
+	$ST	r9,`2*$BNSZ`(r3)
+	addi	r12,r10,0
+		
+Lppcasm_mw_OVER:	
+	addi	r3,r12,0
+	blr
+	.long	0x00000000
+
+#
+#	NOTE:	The following label name should be changed to
+#		"bn_mul_add_words" i.e. remove the first dot
+#		for the gcc compiler. This should be automatically
+#		done in the build
+#
+
+.align	4
+.bn_mul_add_words:
+#
+# BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
+#
+# r3 = rp
+# r4 = ap
+# r5 = num
+# r6 = w
+#
+# empirical evidence suggests that unrolled version performs best!!
+#
+	xor	r0,r0,r0		#r0 = 0
+	xor	r12,r12,r12  		#r12 = 0 . used for carry		
+	rlwinm.	r7,r5,30,2,31		# num >> 2
+	beq	Lppcasm_maw_leftover	# if (num < 4) go LPPCASM_maw_leftover
+	mtctr	r7
+Lppcasm_maw_mainloop:	
+					#mul_add(rp[0],ap[0],w,c1);
+	$LD	r8,`0*$BNSZ`(r4)
+	$LD	r11,`0*$BNSZ`(r3)
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	addc	r9,r9,r12		#r12 is carry.
+	addze	r10,r10
+	addc	r9,r9,r11
+	#addze	r10,r10
+					#the above instruction addze
+					#is NOT needed. Carry will NOT
+					#be ignored. It's not affected
+					#by multiply and will be collected
+					#in the next spin
+	$ST	r9,`0*$BNSZ`(r3)
+	
+					#mul_add(rp[1],ap[1],w,c1);
+	$LD	r8,`1*$BNSZ`(r4)	
+	$LD	r9,`1*$BNSZ`(r3)
+	$UMULL	r11,r6,r8
+	$UMULH  r12,r6,r8
+	adde	r11,r11,r10		#r10 is carry.
+	addze	r12,r12
+	addc	r11,r11,r9
+	#addze	r12,r12
+	$ST	r11,`1*$BNSZ`(r3)
+	
+					#mul_add(rp[2],ap[2],w,c1);
+	$LD	r8,`2*$BNSZ`(r4)
+	$UMULL	r9,r6,r8
+	$LD	r11,`2*$BNSZ`(r3)
+	$UMULH  r10,r6,r8
+	adde	r9,r9,r12
+	addze	r10,r10
+	addc	r9,r9,r11
+	#addze	r10,r10
+	$ST	r9,`2*$BNSZ`(r3)
+	
+					#mul_add(rp[3],ap[3],w,c1);
+	$LD	r8,`3*$BNSZ`(r4)
+	$UMULL	r11,r6,r8
+	$LD	r9,`3*$BNSZ`(r3)
+	$UMULH  r12,r6,r8
+	adde	r11,r11,r10
+	addze	r12,r12
+	addc	r11,r11,r9
+	addze	r12,r12
+	$ST	r11,`3*$BNSZ`(r3)
+	addi	r3,r3,`4*$BNSZ`
+	addi	r4,r4,`4*$BNSZ`
+	bdnz-	Lppcasm_maw_mainloop
+	
+Lppcasm_maw_leftover:
+	andi.	r5,r5,0x3
+	beq	Lppcasm_maw_adios
+	addi	r3,r3,-$BNSZ
+	addi	r4,r4,-$BNSZ
+					#mul_add(rp[0],ap[0],w,c1);
+	mtctr	r5
+	$LDU	r8,$BNSZ(r4)
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	$LDU	r11,$BNSZ(r3)
+	addc	r9,r9,r11
+	addze	r10,r10
+	addc	r9,r9,r12
+	addze	r12,r10
+	$ST	r9,0(r3)
+	
+	bdz	Lppcasm_maw_adios
+					#mul_add(rp[1],ap[1],w,c1);
+	$LDU	r8,$BNSZ(r4)	
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	$LDU	r11,$BNSZ(r3)
+	addc	r9,r9,r11
+	addze	r10,r10
+	addc	r9,r9,r12
+	addze	r12,r10
+	$ST	r9,0(r3)
+	
+	bdz	Lppcasm_maw_adios
+					#mul_add(rp[2],ap[2],w,c1);
+	$LDU	r8,$BNSZ(r4)
+	$UMULL	r9,r6,r8
+	$UMULH  r10,r6,r8
+	$LDU	r11,$BNSZ(r3)
+	addc	r9,r9,r11
+	addze	r10,r10
+	addc	r9,r9,r12
+	addze	r12,r10
+	$ST	r9,0(r3)
+		
+Lppcasm_maw_adios:	
+	addi	r3,r12,0
+	blr
+	.long	0x00000000
+	.align	4
+EOF
+$data =~ s/\`([^\`]*)\`/eval $1/gem;
+print $data;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/ppc64-mont.pl b/app/openssl/crypto/bn/asm/ppc64-mont.pl
new file mode 100644
index 00000000..3449b358
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/ppc64-mont.pl
@@ -0,0 +1,918 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# December 2007
+
+# The reason for undertaken effort is basically following. Even though
+# Power 6 CPU operates at incredible 4.7GHz clock frequency, its PKI
+# performance was observed to be less than impressive, essentially as
+# fast as 1.8GHz PPC970, or 2.6 times(!) slower than one would hope.
+# Well, it's not surprising that IBM had to make some sacrifices to
+# boost the clock frequency that much, but no overall improvement?
+# Having observed how much difference did switching to FPU make on
+# UltraSPARC, playing same stunt on Power 6 appeared appropriate...
+# Unfortunately the resulting performance improvement is not as
+# impressive, ~30%, and in absolute terms is still very far from what
+# one would expect from 4.7GHz CPU. There is a chance that I'm doing
+# something wrong, but in the lack of assembler level micro-profiling
+# data or at least decent platform guide I can't tell... Or better
+# results might be achieved with VMX... Anyway, this module provides
+# *worse* performance on other PowerPC implementations, ~40-15% slower
+# on PPC970 depending on key length and ~40% slower on Power 5 for all
+# key lengths. As it's obviously inappropriate as "best all-round"
+# alternative, it has to be complemented with run-time CPU family
+# detection. Oh! It should also be noted that unlike other PowerPC
+# implementation IALU ppc-mont.pl module performs *suboptimaly* on
+# >=1024-bit key lengths on Power 6. It should also be noted that
+# *everything* said so far applies to 64-bit builds! As far as 32-bit
+# application executed on 64-bit CPU goes, this module is likely to
+# become preferred choice, because it's easy to adapt it for such
+# case and *is* faster than 32-bit ppc-mont.pl on *all* processors.
+
+# February 2008
+
+# Micro-profiling assisted optimization results in ~15% improvement
+# over original ppc64-mont.pl version, or overall ~50% improvement
+# over ppc.pl module on Power 6. If compared to ppc-mont.pl on same
+# Power 6 CPU, this module is 5-150% faster depending on key length,
+# [hereafter] more for longer keys. But if compared to ppc-mont.pl
+# on 1.8GHz PPC970, it's only 5-55% faster. Still far from impressive
+# in absolute terms, but it's apparently the way Power 6 is...
+
+$flavour = shift;
+
+if ($flavour =~ /32/) {
+	$SIZE_T=4;
+	$RZONE=	224;
+	$FRAME=	$SIZE_T*12+8*12;
+	$fname=	"bn_mul_mont_ppc64";
+
+	$STUX=	"stwux";	# store indexed and update
+	$PUSH=	"stw";
+	$POP=	"lwz";
+	die "not implemented yet";
+} elsif ($flavour =~ /64/) {
+	$SIZE_T=8;
+	$RZONE=	288;
+	$FRAME=	$SIZE_T*12+8*12;
+	$fname=	"bn_mul_mont";
+
+	# same as above, but 64-bit mnemonics...
+	$STUX=	"stdux";	# store indexed and update
+	$PUSH=	"std";
+	$POP=	"ld";
+} else { die "nonsense $flavour"; }
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$FRAME=($FRAME+63)&~63;
+$TRANSFER=16*8;
+
+$carry="r0";
+$sp="r1";
+$toc="r2";
+$rp="r3";	$ovf="r3";
+$ap="r4";
+$bp="r5";
+$np="r6";
+$n0="r7";
+$num="r8";
+$rp="r9";	# $rp is reassigned
+$tp="r10";
+$j="r11";
+$i="r12";
+# non-volatile registers
+$nap_d="r14";	# interleaved ap and np in double format
+$a0="r15";	# ap[0]
+$t0="r16";	# temporary registers
+$t1="r17";
+$t2="r18";
+$t3="r19";
+$t4="r20";
+$t5="r21";
+$t6="r22";
+$t7="r23";
+
+# PPC offers enough register bank capacity to unroll inner loops twice
+#
+#     ..A3A2A1A0
+#           dcba
+#    -----------
+#            A0a
+#           A0b
+#          A0c
+#         A0d
+#          A1a
+#         A1b
+#        A1c
+#       A1d
+#        A2a
+#       A2b
+#      A2c
+#     A2d
+#      A3a
+#     A3b
+#    A3c
+#   A3d
+#    ..a
+#   ..b
+#
+$ba="f0";	$bb="f1";	$bc="f2";	$bd="f3";
+$na="f4";	$nb="f5";	$nc="f6";	$nd="f7";
+$dota="f8";	$dotb="f9";
+$A0="f10";	$A1="f11";	$A2="f12";	$A3="f13";
+$N0="f14";	$N1="f15";	$N2="f16";	$N3="f17";
+$T0a="f18";	$T0b="f19";
+$T1a="f20";	$T1b="f21";
+$T2a="f22";	$T2b="f23";
+$T3a="f24";	$T3b="f25";
+
+# sp----------->+-------------------------------+
+#		| saved sp			|
+#		+-------------------------------+
+#		|				|
+#		+-------------------------------+
+#		| 10 saved gpr, r14-r23		|
+#		.				.
+#		.				.
+#   +12*size_t	+-------------------------------+
+#		| 12 saved fpr, f14-f25		|
+#		.				.
+#		.				.
+#   +12*8	+-------------------------------+
+#		| padding to 64 byte boundary	|
+#		.				.
+#   +X		+-------------------------------+
+#		| 16 gpr<->fpr transfer zone	|
+#		.				.
+#		.				.
+#   +16*8	+-------------------------------+
+#		| __int64 tmp[-1]		|
+#		+-------------------------------+
+#		| __int64 tmp[num]		|
+#		.				.
+#		.				.
+#		.				.
+#   +(num+1)*8	+-------------------------------+
+#		| padding to 64 byte boundary	|
+#		.				.
+#   +X		+-------------------------------+
+#		| double nap_d[4*num]		|
+#		.				.
+#		.				.
+#		.				.
+#		+-------------------------------+
+
+$code=<<___;
+.machine "any"
+.text
+
+.globl	.$fname
+.align	5
+.$fname:
+	cmpwi	$num,4
+	mr	$rp,r3		; $rp is reassigned
+	li	r3,0		; possible "not handled" return code
+	bltlr-
+	andi.	r0,$num,1	; $num has to be even
+	bnelr-
+
+	slwi	$num,$num,3	; num*=8
+	li	$i,-4096
+	slwi	$tp,$num,2	; place for {an}p_{lh}[num], i.e. 4*num
+	add	$tp,$tp,$num	; place for tp[num+1]
+	addi	$tp,$tp,`$FRAME+$TRANSFER+8+64+$RZONE`
+	subf	$tp,$tp,$sp	; $sp-$tp
+	and	$tp,$tp,$i	; minimize TLB usage
+	subf	$tp,$sp,$tp	; $tp-$sp
+	$STUX	$sp,$sp,$tp	; alloca
+
+	$PUSH	r14,`2*$SIZE_T`($sp)
+	$PUSH	r15,`3*$SIZE_T`($sp)
+	$PUSH	r16,`4*$SIZE_T`($sp)
+	$PUSH	r17,`5*$SIZE_T`($sp)
+	$PUSH	r18,`6*$SIZE_T`($sp)
+	$PUSH	r19,`7*$SIZE_T`($sp)
+	$PUSH	r20,`8*$SIZE_T`($sp)
+	$PUSH	r21,`9*$SIZE_T`($sp)
+	$PUSH	r22,`10*$SIZE_T`($sp)
+	$PUSH	r23,`11*$SIZE_T`($sp)
+	stfd	f14,`12*$SIZE_T+0`($sp)
+	stfd	f15,`12*$SIZE_T+8`($sp)
+	stfd	f16,`12*$SIZE_T+16`($sp)
+	stfd	f17,`12*$SIZE_T+24`($sp)
+	stfd	f18,`12*$SIZE_T+32`($sp)
+	stfd	f19,`12*$SIZE_T+40`($sp)
+	stfd	f20,`12*$SIZE_T+48`($sp)
+	stfd	f21,`12*$SIZE_T+56`($sp)
+	stfd	f22,`12*$SIZE_T+64`($sp)
+	stfd	f23,`12*$SIZE_T+72`($sp)
+	stfd	f24,`12*$SIZE_T+80`($sp)
+	stfd	f25,`12*$SIZE_T+88`($sp)
+
+	ld	$a0,0($ap)	; pull ap[0] value
+	ld	$n0,0($n0)	; pull n0[0] value
+	ld	$t3,0($bp)	; bp[0]
+
+	addi	$tp,$sp,`$FRAME+$TRANSFER+8+64`
+	li	$i,-64
+	add	$nap_d,$tp,$num
+	and	$nap_d,$nap_d,$i	; align to 64 bytes
+
+	mulld	$t7,$a0,$t3	; ap[0]*bp[0]
+	; nap_d is off by 1, because it's used with stfdu/lfdu
+	addi	$nap_d,$nap_d,-8
+	srwi	$j,$num,`3+1`	; counter register, num/2
+	mulld	$t7,$t7,$n0	; tp[0]*n0
+	addi	$j,$j,-1
+	addi	$tp,$sp,`$FRAME+$TRANSFER-8`
+	li	$carry,0
+	mtctr	$j
+
+	; transfer bp[0] to FPU as 4x16-bit values
+	extrdi	$t0,$t3,16,48
+	extrdi	$t1,$t3,16,32
+	extrdi	$t2,$t3,16,16
+	extrdi	$t3,$t3,16,0
+	std	$t0,`$FRAME+0`($sp)
+	std	$t1,`$FRAME+8`($sp)
+	std	$t2,`$FRAME+16`($sp)
+	std	$t3,`$FRAME+24`($sp)
+	; transfer (ap[0]*bp[0])*n0 to FPU as 4x16-bit values
+	extrdi	$t4,$t7,16,48
+	extrdi	$t5,$t7,16,32
+	extrdi	$t6,$t7,16,16
+	extrdi	$t7,$t7,16,0
+	std	$t4,`$FRAME+32`($sp)
+	std	$t5,`$FRAME+40`($sp)
+	std	$t6,`$FRAME+48`($sp)
+	std	$t7,`$FRAME+56`($sp)
+	lwz	$t0,4($ap)		; load a[j] as 32-bit word pair
+	lwz	$t1,0($ap)
+	lwz	$t2,12($ap)		; load a[j+1] as 32-bit word pair
+	lwz	$t3,8($ap)
+	lwz	$t4,4($np)		; load n[j] as 32-bit word pair
+	lwz	$t5,0($np)
+	lwz	$t6,12($np)		; load n[j+1] as 32-bit word pair
+	lwz	$t7,8($np)
+	lfd	$ba,`$FRAME+0`($sp)
+	lfd	$bb,`$FRAME+8`($sp)
+	lfd	$bc,`$FRAME+16`($sp)
+	lfd	$bd,`$FRAME+24`($sp)
+	lfd	$na,`$FRAME+32`($sp)
+	lfd	$nb,`$FRAME+40`($sp)
+	lfd	$nc,`$FRAME+48`($sp)
+	lfd	$nd,`$FRAME+56`($sp)
+	std	$t0,`$FRAME+64`($sp)
+	std	$t1,`$FRAME+72`($sp)
+	std	$t2,`$FRAME+80`($sp)
+	std	$t3,`$FRAME+88`($sp)
+	std	$t4,`$FRAME+96`($sp)
+	std	$t5,`$FRAME+104`($sp)
+	std	$t6,`$FRAME+112`($sp)
+	std	$t7,`$FRAME+120`($sp)
+	fcfid	$ba,$ba
+	fcfid	$bb,$bb
+	fcfid	$bc,$bc
+	fcfid	$bd,$bd
+	fcfid	$na,$na
+	fcfid	$nb,$nb
+	fcfid	$nc,$nc
+	fcfid	$nd,$nd
+
+	lfd	$A0,`$FRAME+64`($sp)
+	lfd	$A1,`$FRAME+72`($sp)
+	lfd	$A2,`$FRAME+80`($sp)
+	lfd	$A3,`$FRAME+88`($sp)
+	lfd	$N0,`$FRAME+96`($sp)
+	lfd	$N1,`$FRAME+104`($sp)
+	lfd	$N2,`$FRAME+112`($sp)
+	lfd	$N3,`$FRAME+120`($sp)
+	fcfid	$A0,$A0
+	fcfid	$A1,$A1
+	fcfid	$A2,$A2
+	fcfid	$A3,$A3
+	fcfid	$N0,$N0
+	fcfid	$N1,$N1
+	fcfid	$N2,$N2
+	fcfid	$N3,$N3
+	addi	$ap,$ap,16
+	addi	$np,$np,16
+
+	fmul	$T1a,$A1,$ba
+	fmul	$T1b,$A1,$bb
+	stfd	$A0,8($nap_d)		; save a[j] in double format
+	stfd	$A1,16($nap_d)
+	fmul	$T2a,$A2,$ba
+	fmul	$T2b,$A2,$bb
+	stfd	$A2,24($nap_d)		; save a[j+1] in double format
+	stfd	$A3,32($nap_d)
+	fmul	$T3a,$A3,$ba
+	fmul	$T3b,$A3,$bb
+	stfd	$N0,40($nap_d)		; save n[j] in double format
+	stfd	$N1,48($nap_d)
+	fmul	$T0a,$A0,$ba
+	fmul	$T0b,$A0,$bb
+	stfd	$N2,56($nap_d)		; save n[j+1] in double format
+	stfdu	$N3,64($nap_d)
+
+	fmadd	$T1a,$A0,$bc,$T1a
+	fmadd	$T1b,$A0,$bd,$T1b
+	fmadd	$T2a,$A1,$bc,$T2a
+	fmadd	$T2b,$A1,$bd,$T2b
+	fmadd	$T3a,$A2,$bc,$T3a
+	fmadd	$T3b,$A2,$bd,$T3b
+	fmul	$dota,$A3,$bc
+	fmul	$dotb,$A3,$bd
+
+	fmadd	$T1a,$N1,$na,$T1a
+	fmadd	$T1b,$N1,$nb,$T1b
+	fmadd	$T2a,$N2,$na,$T2a
+	fmadd	$T2b,$N2,$nb,$T2b
+	fmadd	$T3a,$N3,$na,$T3a
+	fmadd	$T3b,$N3,$nb,$T3b
+	fmadd	$T0a,$N0,$na,$T0a
+	fmadd	$T0b,$N0,$nb,$T0b
+
+	fmadd	$T1a,$N0,$nc,$T1a
+	fmadd	$T1b,$N0,$nd,$T1b
+	fmadd	$T2a,$N1,$nc,$T2a
+	fmadd	$T2b,$N1,$nd,$T2b
+	fmadd	$T3a,$N2,$nc,$T3a
+	fmadd	$T3b,$N2,$nd,$T3b
+	fmadd	$dota,$N3,$nc,$dota
+	fmadd	$dotb,$N3,$nd,$dotb
+
+	fctid	$T0a,$T0a
+	fctid	$T0b,$T0b
+	fctid	$T1a,$T1a
+	fctid	$T1b,$T1b
+	fctid	$T2a,$T2a
+	fctid	$T2b,$T2b
+	fctid	$T3a,$T3a
+	fctid	$T3b,$T3b
+
+	stfd	$T0a,`$FRAME+0`($sp)
+	stfd	$T0b,`$FRAME+8`($sp)
+	stfd	$T1a,`$FRAME+16`($sp)
+	stfd	$T1b,`$FRAME+24`($sp)
+	stfd	$T2a,`$FRAME+32`($sp)
+	stfd	$T2b,`$FRAME+40`($sp)
+	stfd	$T3a,`$FRAME+48`($sp)
+	stfd	$T3b,`$FRAME+56`($sp)
+
+.align	5
+L1st:
+	lwz	$t0,4($ap)		; load a[j] as 32-bit word pair
+	lwz	$t1,0($ap)
+	lwz	$t2,12($ap)		; load a[j+1] as 32-bit word pair
+	lwz	$t3,8($ap)
+	lwz	$t4,4($np)		; load n[j] as 32-bit word pair
+	lwz	$t5,0($np)
+	lwz	$t6,12($np)		; load n[j+1] as 32-bit word pair
+	lwz	$t7,8($np)
+	std	$t0,`$FRAME+64`($sp)
+	std	$t1,`$FRAME+72`($sp)
+	std	$t2,`$FRAME+80`($sp)
+	std	$t3,`$FRAME+88`($sp)
+	std	$t4,`$FRAME+96`($sp)
+	std	$t5,`$FRAME+104`($sp)
+	std	$t6,`$FRAME+112`($sp)
+	std	$t7,`$FRAME+120`($sp)
+	ld	$t0,`$FRAME+0`($sp)
+	ld	$t1,`$FRAME+8`($sp)
+	ld	$t2,`$FRAME+16`($sp)
+	ld	$t3,`$FRAME+24`($sp)
+	ld	$t4,`$FRAME+32`($sp)
+	ld	$t5,`$FRAME+40`($sp)
+	ld	$t6,`$FRAME+48`($sp)
+	ld	$t7,`$FRAME+56`($sp)
+	lfd	$A0,`$FRAME+64`($sp)
+	lfd	$A1,`$FRAME+72`($sp)
+	lfd	$A2,`$FRAME+80`($sp)
+	lfd	$A3,`$FRAME+88`($sp)
+	lfd	$N0,`$FRAME+96`($sp)
+	lfd	$N1,`$FRAME+104`($sp)
+	lfd	$N2,`$FRAME+112`($sp)
+	lfd	$N3,`$FRAME+120`($sp)
+	fcfid	$A0,$A0
+	fcfid	$A1,$A1
+	fcfid	$A2,$A2
+	fcfid	$A3,$A3
+	fcfid	$N0,$N0
+	fcfid	$N1,$N1
+	fcfid	$N2,$N2
+	fcfid	$N3,$N3
+	addi	$ap,$ap,16
+	addi	$np,$np,16
+
+	fmul	$T1a,$A1,$ba
+	fmul	$T1b,$A1,$bb
+	fmul	$T2a,$A2,$ba
+	fmul	$T2b,$A2,$bb
+	stfd	$A0,8($nap_d)		; save a[j] in double format
+	stfd	$A1,16($nap_d)
+	fmul	$T3a,$A3,$ba
+	fmul	$T3b,$A3,$bb
+	fmadd	$T0a,$A0,$ba,$dota
+	fmadd	$T0b,$A0,$bb,$dotb
+	stfd	$A2,24($nap_d)		; save a[j+1] in double format
+	stfd	$A3,32($nap_d)
+
+	fmadd	$T1a,$A0,$bc,$T1a
+	fmadd	$T1b,$A0,$bd,$T1b
+	fmadd	$T2a,$A1,$bc,$T2a
+	fmadd	$T2b,$A1,$bd,$T2b
+	stfd	$N0,40($nap_d)		; save n[j] in double format
+	stfd	$N1,48($nap_d)
+	fmadd	$T3a,$A2,$bc,$T3a
+	fmadd	$T3b,$A2,$bd,$T3b
+	 add	$t0,$t0,$carry		; can not overflow
+	fmul	$dota,$A3,$bc
+	fmul	$dotb,$A3,$bd
+	stfd	$N2,56($nap_d)		; save n[j+1] in double format
+	stfdu	$N3,64($nap_d)
+	 srdi	$carry,$t0,16
+	 add	$t1,$t1,$carry
+	 srdi	$carry,$t1,16
+
+	fmadd	$T1a,$N1,$na,$T1a
+	fmadd	$T1b,$N1,$nb,$T1b
+	 insrdi	$t0,$t1,16,32
+	fmadd	$T2a,$N2,$na,$T2a
+	fmadd	$T2b,$N2,$nb,$T2b
+	 add	$t2,$t2,$carry
+	fmadd	$T3a,$N3,$na,$T3a
+	fmadd	$T3b,$N3,$nb,$T3b
+	 srdi	$carry,$t2,16
+	fmadd	$T0a,$N0,$na,$T0a
+	fmadd	$T0b,$N0,$nb,$T0b
+	 insrdi	$t0,$t2,16,16
+	 add	$t3,$t3,$carry
+	 srdi	$carry,$t3,16
+
+	fmadd	$T1a,$N0,$nc,$T1a
+	fmadd	$T1b,$N0,$nd,$T1b
+	 insrdi	$t0,$t3,16,0		; 0..63 bits
+	fmadd	$T2a,$N1,$nc,$T2a
+	fmadd	$T2b,$N1,$nd,$T2b
+	 add	$t4,$t4,$carry
+	fmadd	$T3a,$N2,$nc,$T3a
+	fmadd	$T3b,$N2,$nd,$T3b
+	 srdi	$carry,$t4,16
+	fmadd	$dota,$N3,$nc,$dota
+	fmadd	$dotb,$N3,$nd,$dotb
+	 add	$t5,$t5,$carry
+	 srdi	$carry,$t5,16
+	 insrdi	$t4,$t5,16,32
+
+	fctid	$T0a,$T0a
+	fctid	$T0b,$T0b
+	 add	$t6,$t6,$carry
+	fctid	$T1a,$T1a
+	fctid	$T1b,$T1b
+	 srdi	$carry,$t6,16
+	fctid	$T2a,$T2a
+	fctid	$T2b,$T2b
+	 insrdi	$t4,$t6,16,16
+	fctid	$T3a,$T3a
+	fctid	$T3b,$T3b
+	 add	$t7,$t7,$carry
+	 insrdi	$t4,$t7,16,0		; 64..127 bits
+	 srdi	$carry,$t7,16		; upper 33 bits
+
+	stfd	$T0a,`$FRAME+0`($sp)
+	stfd	$T0b,`$FRAME+8`($sp)
+	stfd	$T1a,`$FRAME+16`($sp)
+	stfd	$T1b,`$FRAME+24`($sp)
+	stfd	$T2a,`$FRAME+32`($sp)
+	stfd	$T2b,`$FRAME+40`($sp)
+	stfd	$T3a,`$FRAME+48`($sp)
+	stfd	$T3b,`$FRAME+56`($sp)
+	 std	$t0,8($tp)		; tp[j-1]
+	 stdu	$t4,16($tp)		; tp[j]
+	bdnz-	L1st
+
+	fctid	$dota,$dota
+	fctid	$dotb,$dotb
+
+	ld	$t0,`$FRAME+0`($sp)
+	ld	$t1,`$FRAME+8`($sp)
+	ld	$t2,`$FRAME+16`($sp)
+	ld	$t3,`$FRAME+24`($sp)
+	ld	$t4,`$FRAME+32`($sp)
+	ld	$t5,`$FRAME+40`($sp)
+	ld	$t6,`$FRAME+48`($sp)
+	ld	$t7,`$FRAME+56`($sp)
+	stfd	$dota,`$FRAME+64`($sp)
+	stfd	$dotb,`$FRAME+72`($sp)
+
+	add	$t0,$t0,$carry		; can not overflow
+	srdi	$carry,$t0,16
+	add	$t1,$t1,$carry
+	srdi	$carry,$t1,16
+	insrdi	$t0,$t1,16,32
+	add	$t2,$t2,$carry
+	srdi	$carry,$t2,16
+	insrdi	$t0,$t2,16,16
+	add	$t3,$t3,$carry
+	srdi	$carry,$t3,16
+	insrdi	$t0,$t3,16,0		; 0..63 bits
+	add	$t4,$t4,$carry
+	srdi	$carry,$t4,16
+	add	$t5,$t5,$carry
+	srdi	$carry,$t5,16
+	insrdi	$t4,$t5,16,32
+	add	$t6,$t6,$carry
+	srdi	$carry,$t6,16
+	insrdi	$t4,$t6,16,16
+	add	$t7,$t7,$carry
+	insrdi	$t4,$t7,16,0		; 64..127 bits
+	srdi	$carry,$t7,16		; upper 33 bits
+	ld	$t6,`$FRAME+64`($sp)
+	ld	$t7,`$FRAME+72`($sp)
+
+	std	$t0,8($tp)		; tp[j-1]
+	stdu	$t4,16($tp)		; tp[j]
+
+	add	$t6,$t6,$carry		; can not overflow
+	srdi	$carry,$t6,16
+	add	$t7,$t7,$carry
+	insrdi	$t6,$t7,48,0
+	srdi	$ovf,$t7,48
+	std	$t6,8($tp)		; tp[num-1]
+
+	slwi	$t7,$num,2
+	subf	$nap_d,$t7,$nap_d	; rewind pointer
+
+	li	$i,8			; i=1
+.align	5
+Louter:
+	ldx	$t3,$bp,$i	; bp[i]
+	ld	$t6,`$FRAME+$TRANSFER+8`($sp)	; tp[0]
+	mulld	$t7,$a0,$t3	; ap[0]*bp[i]
+
+	addi	$tp,$sp,`$FRAME+$TRANSFER`
+	add	$t7,$t7,$t6	; ap[0]*bp[i]+tp[0]
+	li	$carry,0
+	mulld	$t7,$t7,$n0	; tp[0]*n0
+	mtctr	$j
+
+	; transfer bp[i] to FPU as 4x16-bit values
+	extrdi	$t0,$t3,16,48
+	extrdi	$t1,$t3,16,32
+	extrdi	$t2,$t3,16,16
+	extrdi	$t3,$t3,16,0
+	std	$t0,`$FRAME+0`($sp)
+	std	$t1,`$FRAME+8`($sp)
+	std	$t2,`$FRAME+16`($sp)
+	std	$t3,`$FRAME+24`($sp)
+	; transfer (ap[0]*bp[i]+tp[0])*n0 to FPU as 4x16-bit values
+	extrdi	$t4,$t7,16,48
+	extrdi	$t5,$t7,16,32
+	extrdi	$t6,$t7,16,16
+	extrdi	$t7,$t7,16,0
+	std	$t4,`$FRAME+32`($sp)
+	std	$t5,`$FRAME+40`($sp)
+	std	$t6,`$FRAME+48`($sp)
+	std	$t7,`$FRAME+56`($sp)
+
+	lfd	$A0,8($nap_d)		; load a[j] in double format
+	lfd	$A1,16($nap_d)
+	lfd	$A2,24($nap_d)		; load a[j+1] in double format
+	lfd	$A3,32($nap_d)
+	lfd	$N0,40($nap_d)		; load n[j] in double format
+	lfd	$N1,48($nap_d)
+	lfd	$N2,56($nap_d)		; load n[j+1] in double format
+	lfdu	$N3,64($nap_d)
+
+	lfd	$ba,`$FRAME+0`($sp)
+	lfd	$bb,`$FRAME+8`($sp)
+	lfd	$bc,`$FRAME+16`($sp)
+	lfd	$bd,`$FRAME+24`($sp)
+	lfd	$na,`$FRAME+32`($sp)
+	lfd	$nb,`$FRAME+40`($sp)
+	lfd	$nc,`$FRAME+48`($sp)
+	lfd	$nd,`$FRAME+56`($sp)
+
+	fcfid	$ba,$ba
+	fcfid	$bb,$bb
+	fcfid	$bc,$bc
+	fcfid	$bd,$bd
+	fcfid	$na,$na
+	fcfid	$nb,$nb
+	fcfid	$nc,$nc
+	fcfid	$nd,$nd
+
+	fmul	$T1a,$A1,$ba
+	fmul	$T1b,$A1,$bb
+	fmul	$T2a,$A2,$ba
+	fmul	$T2b,$A2,$bb
+	fmul	$T3a,$A3,$ba
+	fmul	$T3b,$A3,$bb
+	fmul	$T0a,$A0,$ba
+	fmul	$T0b,$A0,$bb
+
+	fmadd	$T1a,$A0,$bc,$T1a
+	fmadd	$T1b,$A0,$bd,$T1b
+	fmadd	$T2a,$A1,$bc,$T2a
+	fmadd	$T2b,$A1,$bd,$T2b
+	fmadd	$T3a,$A2,$bc,$T3a
+	fmadd	$T3b,$A2,$bd,$T3b
+	fmul	$dota,$A3,$bc
+	fmul	$dotb,$A3,$bd
+
+	fmadd	$T1a,$N1,$na,$T1a
+	fmadd	$T1b,$N1,$nb,$T1b
+	 lfd	$A0,8($nap_d)		; load a[j] in double format
+	 lfd	$A1,16($nap_d)
+	fmadd	$T2a,$N2,$na,$T2a
+	fmadd	$T2b,$N2,$nb,$T2b
+	 lfd	$A2,24($nap_d)		; load a[j+1] in double format
+	 lfd	$A3,32($nap_d)
+	fmadd	$T3a,$N3,$na,$T3a
+	fmadd	$T3b,$N3,$nb,$T3b
+	fmadd	$T0a,$N0,$na,$T0a
+	fmadd	$T0b,$N0,$nb,$T0b
+
+	fmadd	$T1a,$N0,$nc,$T1a
+	fmadd	$T1b,$N0,$nd,$T1b
+	fmadd	$T2a,$N1,$nc,$T2a
+	fmadd	$T2b,$N1,$nd,$T2b
+	fmadd	$T3a,$N2,$nc,$T3a
+	fmadd	$T3b,$N2,$nd,$T3b
+	fmadd	$dota,$N3,$nc,$dota
+	fmadd	$dotb,$N3,$nd,$dotb
+
+	fctid	$T0a,$T0a
+	fctid	$T0b,$T0b
+	fctid	$T1a,$T1a
+	fctid	$T1b,$T1b
+	fctid	$T2a,$T2a
+	fctid	$T2b,$T2b
+	fctid	$T3a,$T3a
+	fctid	$T3b,$T3b
+
+	stfd	$T0a,`$FRAME+0`($sp)
+	stfd	$T0b,`$FRAME+8`($sp)
+	stfd	$T1a,`$FRAME+16`($sp)
+	stfd	$T1b,`$FRAME+24`($sp)
+	stfd	$T2a,`$FRAME+32`($sp)
+	stfd	$T2b,`$FRAME+40`($sp)
+	stfd	$T3a,`$FRAME+48`($sp)
+	stfd	$T3b,`$FRAME+56`($sp)
+
+.align	5
+Linner:
+	fmul	$T1a,$A1,$ba
+	fmul	$T1b,$A1,$bb
+	fmul	$T2a,$A2,$ba
+	fmul	$T2b,$A2,$bb
+	lfd	$N0,40($nap_d)		; load n[j] in double format
+	lfd	$N1,48($nap_d)
+	fmul	$T3a,$A3,$ba
+	fmul	$T3b,$A3,$bb
+	fmadd	$T0a,$A0,$ba,$dota
+	fmadd	$T0b,$A0,$bb,$dotb
+	lfd	$N2,56($nap_d)		; load n[j+1] in double format
+	lfdu	$N3,64($nap_d)
+
+	fmadd	$T1a,$A0,$bc,$T1a
+	fmadd	$T1b,$A0,$bd,$T1b
+	fmadd	$T2a,$A1,$bc,$T2a
+	fmadd	$T2b,$A1,$bd,$T2b
+	 lfd	$A0,8($nap_d)		; load a[j] in double format
+	 lfd	$A1,16($nap_d)
+	fmadd	$T3a,$A2,$bc,$T3a
+	fmadd	$T3b,$A2,$bd,$T3b
+	fmul	$dota,$A3,$bc
+	fmul	$dotb,$A3,$bd
+	 lfd	$A2,24($nap_d)		; load a[j+1] in double format
+	 lfd	$A3,32($nap_d)
+
+	fmadd	$T1a,$N1,$na,$T1a
+	fmadd	$T1b,$N1,$nb,$T1b
+	 ld	$t0,`$FRAME+0`($sp)
+	 ld	$t1,`$FRAME+8`($sp)
+	fmadd	$T2a,$N2,$na,$T2a
+	fmadd	$T2b,$N2,$nb,$T2b
+	 ld	$t2,`$FRAME+16`($sp)
+	 ld	$t3,`$FRAME+24`($sp)
+	fmadd	$T3a,$N3,$na,$T3a
+	fmadd	$T3b,$N3,$nb,$T3b
+	 add	$t0,$t0,$carry		; can not overflow
+	 ld	$t4,`$FRAME+32`($sp)
+	 ld	$t5,`$FRAME+40`($sp)
+	fmadd	$T0a,$N0,$na,$T0a
+	fmadd	$T0b,$N0,$nb,$T0b
+	 srdi	$carry,$t0,16
+	 add	$t1,$t1,$carry
+	 srdi	$carry,$t1,16
+	 ld	$t6,`$FRAME+48`($sp)
+	 ld	$t7,`$FRAME+56`($sp)
+
+	fmadd	$T1a,$N0,$nc,$T1a
+	fmadd	$T1b,$N0,$nd,$T1b
+	 insrdi	$t0,$t1,16,32
+	 ld	$t1,8($tp)		; tp[j]
+	fmadd	$T2a,$N1,$nc,$T2a
+	fmadd	$T2b,$N1,$nd,$T2b
+	 add	$t2,$t2,$carry
+	fmadd	$T3a,$N2,$nc,$T3a
+	fmadd	$T3b,$N2,$nd,$T3b
+	 srdi	$carry,$t2,16
+	 insrdi	$t0,$t2,16,16
+	fmadd	$dota,$N3,$nc,$dota
+	fmadd	$dotb,$N3,$nd,$dotb
+	 add	$t3,$t3,$carry
+	 ldu	$t2,16($tp)		; tp[j+1]
+	 srdi	$carry,$t3,16
+	 insrdi	$t0,$t3,16,0		; 0..63 bits
+	 add	$t4,$t4,$carry
+
+	fctid	$T0a,$T0a
+	fctid	$T0b,$T0b
+	 srdi	$carry,$t4,16
+	fctid	$T1a,$T1a
+	fctid	$T1b,$T1b
+	 add	$t5,$t5,$carry
+	fctid	$T2a,$T2a
+	fctid	$T2b,$T2b
+	 srdi	$carry,$t5,16
+	 insrdi	$t4,$t5,16,32
+	fctid	$T3a,$T3a
+	fctid	$T3b,$T3b
+	 add	$t6,$t6,$carry
+	 srdi	$carry,$t6,16
+	 insrdi	$t4,$t6,16,16
+
+	stfd	$T0a,`$FRAME+0`($sp)
+	stfd	$T0b,`$FRAME+8`($sp)
+	 add	$t7,$t7,$carry
+	 addc	$t3,$t0,$t1
+	stfd	$T1a,`$FRAME+16`($sp)
+	stfd	$T1b,`$FRAME+24`($sp)
+	 insrdi	$t4,$t7,16,0		; 64..127 bits
+	 srdi	$carry,$t7,16		; upper 33 bits
+	stfd	$T2a,`$FRAME+32`($sp)
+	stfd	$T2b,`$FRAME+40`($sp)
+	 adde	$t5,$t4,$t2
+	stfd	$T3a,`$FRAME+48`($sp)
+	stfd	$T3b,`$FRAME+56`($sp)
+	 addze	$carry,$carry
+	 std	$t3,-16($tp)		; tp[j-1]
+	 std	$t5,-8($tp)		; tp[j]
+	bdnz-	Linner
+
+	fctid	$dota,$dota
+	fctid	$dotb,$dotb
+	ld	$t0,`$FRAME+0`($sp)
+	ld	$t1,`$FRAME+8`($sp)
+	ld	$t2,`$FRAME+16`($sp)
+	ld	$t3,`$FRAME+24`($sp)
+	ld	$t4,`$FRAME+32`($sp)
+	ld	$t5,`$FRAME+40`($sp)
+	ld	$t6,`$FRAME+48`($sp)
+	ld	$t7,`$FRAME+56`($sp)
+	stfd	$dota,`$FRAME+64`($sp)
+	stfd	$dotb,`$FRAME+72`($sp)
+
+	add	$t0,$t0,$carry		; can not overflow
+	srdi	$carry,$t0,16
+	add	$t1,$t1,$carry
+	srdi	$carry,$t1,16
+	insrdi	$t0,$t1,16,32
+	add	$t2,$t2,$carry
+	ld	$t1,8($tp)		; tp[j]
+	srdi	$carry,$t2,16
+	insrdi	$t0,$t2,16,16
+	add	$t3,$t3,$carry
+	ldu	$t2,16($tp)		; tp[j+1]
+	srdi	$carry,$t3,16
+	insrdi	$t0,$t3,16,0		; 0..63 bits
+	add	$t4,$t4,$carry
+	srdi	$carry,$t4,16
+	add	$t5,$t5,$carry
+	srdi	$carry,$t5,16
+	insrdi	$t4,$t5,16,32
+	add	$t6,$t6,$carry
+	srdi	$carry,$t6,16
+	insrdi	$t4,$t6,16,16
+	add	$t7,$t7,$carry
+	insrdi	$t4,$t7,16,0		; 64..127 bits
+	srdi	$carry,$t7,16		; upper 33 bits
+	ld	$t6,`$FRAME+64`($sp)
+	ld	$t7,`$FRAME+72`($sp)
+
+	addc	$t3,$t0,$t1
+	adde	$t5,$t4,$t2
+	addze	$carry,$carry
+
+	std	$t3,-16($tp)		; tp[j-1]
+	std	$t5,-8($tp)		; tp[j]
+
+	add	$carry,$carry,$ovf	; comsume upmost overflow
+	add	$t6,$t6,$carry		; can not overflow
+	srdi	$carry,$t6,16
+	add	$t7,$t7,$carry
+	insrdi	$t6,$t7,48,0
+	srdi	$ovf,$t7,48
+	std	$t6,0($tp)		; tp[num-1]
+
+	slwi	$t7,$num,2
+	addi	$i,$i,8
+	subf	$nap_d,$t7,$nap_d	; rewind pointer
+	cmpw	$i,$num
+	blt-	Louter
+
+	subf	$np,$num,$np	; rewind np
+	addi	$j,$j,1		; restore counter
+	subfc	$i,$i,$i	; j=0 and "clear" XER[CA]
+	addi	$tp,$sp,`$FRAME+$TRANSFER+8`
+	addi	$t4,$sp,`$FRAME+$TRANSFER+16`
+	addi	$t5,$np,8
+	addi	$t6,$rp,8
+	mtctr	$j
+
+.align	4
+Lsub:	ldx	$t0,$tp,$i
+	ldx	$t1,$np,$i
+	ldx	$t2,$t4,$i
+	ldx	$t3,$t5,$i
+	subfe	$t0,$t1,$t0	; tp[j]-np[j]
+	subfe	$t2,$t3,$t2	; tp[j+1]-np[j+1]
+	stdx	$t0,$rp,$i
+	stdx	$t2,$t6,$i
+	addi	$i,$i,16
+	bdnz-	Lsub
+
+	li	$i,0
+	subfe	$ovf,$i,$ovf	; handle upmost overflow bit
+	and	$ap,$tp,$ovf
+	andc	$np,$rp,$ovf
+	or	$ap,$ap,$np	; ap=borrow?tp:rp
+	addi	$t7,$ap,8
+	mtctr	$j
+
+.align	4
+Lcopy:				; copy or in-place refresh
+	ldx	$t0,$ap,$i
+	ldx	$t1,$t7,$i
+	std	$i,8($nap_d)	; zap nap_d
+	std	$i,16($nap_d)
+	std	$i,24($nap_d)
+	std	$i,32($nap_d)
+	std	$i,40($nap_d)
+	std	$i,48($nap_d)
+	std	$i,56($nap_d)
+	stdu	$i,64($nap_d)
+	stdx	$t0,$rp,$i
+	stdx	$t1,$t6,$i
+	stdx	$i,$tp,$i	; zap tp at once
+	stdx	$i,$t4,$i
+	addi	$i,$i,16
+	bdnz-	Lcopy
+
+	$POP	r14,`2*$SIZE_T`($sp)
+	$POP	r15,`3*$SIZE_T`($sp)
+	$POP	r16,`4*$SIZE_T`($sp)
+	$POP	r17,`5*$SIZE_T`($sp)
+	$POP	r18,`6*$SIZE_T`($sp)
+	$POP	r19,`7*$SIZE_T`($sp)
+	$POP	r20,`8*$SIZE_T`($sp)
+	$POP	r21,`9*$SIZE_T`($sp)
+	$POP	r22,`10*$SIZE_T`($sp)
+	$POP	r23,`11*$SIZE_T`($sp)
+	lfd	f14,`12*$SIZE_T+0`($sp)
+	lfd	f15,`12*$SIZE_T+8`($sp)
+	lfd	f16,`12*$SIZE_T+16`($sp)
+	lfd	f17,`12*$SIZE_T+24`($sp)
+	lfd	f18,`12*$SIZE_T+32`($sp)
+	lfd	f19,`12*$SIZE_T+40`($sp)
+	lfd	f20,`12*$SIZE_T+48`($sp)
+	lfd	f21,`12*$SIZE_T+56`($sp)
+	lfd	f22,`12*$SIZE_T+64`($sp)
+	lfd	f23,`12*$SIZE_T+72`($sp)
+	lfd	f24,`12*$SIZE_T+80`($sp)
+	lfd	f25,`12*$SIZE_T+88`($sp)
+	$POP	$sp,0($sp)
+	li	r3,1	; signal "handled"
+	blr
+	.long	0
+.asciz  "Montgomery Multiplication for PPC64, CRYPTOGAMS by <appro\@fy.chalmers.se>"
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/s390x-mont.pl b/app/openssl/crypto/bn/asm/s390x-mont.pl
new file mode 100644
index 00000000..f61246f5
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/s390x-mont.pl
@@ -0,0 +1,225 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# April 2007.
+#
+# Performance improvement over vanilla C code varies from 85% to 45%
+# depending on key length and benchmark. Unfortunately in this context
+# these are not very impressive results [for code that utilizes "wide"
+# 64x64=128-bit multiplication, which is not commonly available to C
+# programmers], at least hand-coded bn_asm.c replacement is known to
+# provide 30-40% better results for longest keys. Well, on a second
+# thought it's not very surprising, because z-CPUs are single-issue
+# and _strictly_ in-order execution, while bn_mul_mont is more or less
+# dependent on CPU ability to pipe-line instructions and have several
+# of them "in-flight" at the same time. I mean while other methods,
+# for example Karatsuba, aim to minimize amount of multiplications at
+# the cost of other operations increase, bn_mul_mont aim to neatly
+# "overlap" multiplications and the other operations [and on most
+# platforms even minimize the amount of the other operations, in
+# particular references to memory]. But it's possible to improve this
+# module performance by implementing dedicated squaring code-path and
+# possibly by unrolling loops...
+
+# January 2009.
+#
+# Reschedule to minimize/avoid Address Generation Interlock hazard,
+# make inner loops counter-based.
+
+$mn0="%r0";
+$num="%r1";
+
+# int bn_mul_mont(
+$rp="%r2";		# BN_ULONG *rp,
+$ap="%r3";		# const BN_ULONG *ap,
+$bp="%r4";		# const BN_ULONG *bp,
+$np="%r5";		# const BN_ULONG *np,
+$n0="%r6";		# const BN_ULONG *n0,
+#$num="160(%r15)"	# int num);
+
+$bi="%r2";	# zaps rp
+$j="%r7";
+
+$ahi="%r8";
+$alo="%r9";
+$nhi="%r10";
+$nlo="%r11";
+$AHI="%r12";
+$NHI="%r13";
+$count="%r14";
+$sp="%r15";
+
+$code.=<<___;
+.text
+.globl	bn_mul_mont
+.type	bn_mul_mont,\@function
+bn_mul_mont:
+	lgf	$num,164($sp)	# pull $num
+	sla	$num,3		# $num to enumerate bytes
+	la	$bp,0($num,$bp)
+
+	stg	%r2,16($sp)
+
+	cghi	$num,16		#
+	lghi	%r2,0		#
+	blr	%r14		# if($num<16) return 0;
+	cghi	$num,96		#
+	bhr	%r14		# if($num>96) return 0;
+
+	stmg	%r3,%r15,24($sp)
+
+	lghi	$rp,-160-8	# leave room for carry bit
+	lcgr	$j,$num		# -$num
+	lgr	%r0,$sp
+	la	$rp,0($rp,$sp)
+	la	$sp,0($j,$rp)	# alloca
+	stg	%r0,0($sp)	# back chain
+
+	sra	$num,3		# restore $num
+	la	$bp,0($j,$bp)	# restore $bp
+	ahi	$num,-1		# adjust $num for inner loop
+	lg	$n0,0($n0)	# pull n0
+
+	lg	$bi,0($bp)
+	lg	$alo,0($ap)
+	mlgr	$ahi,$bi	# ap[0]*bp[0]
+	lgr	$AHI,$ahi
+
+	lgr	$mn0,$alo	# "tp[0]"*n0
+	msgr	$mn0,$n0
+
+	lg	$nlo,0($np)	#
+	mlgr	$nhi,$mn0	# np[0]*m1
+	algr	$nlo,$alo	# +="tp[0]"
+	lghi	$NHI,0
+	alcgr	$NHI,$nhi
+
+	la	$j,8(%r0)	# j=1
+	lr	$count,$num
+
+.align	16
+.L1st:
+	lg	$alo,0($j,$ap)
+	mlgr	$ahi,$bi	# ap[j]*bp[0]
+	algr	$alo,$AHI
+	lghi	$AHI,0
+	alcgr	$AHI,$ahi
+
+	lg	$nlo,0($j,$np)
+	mlgr	$nhi,$mn0	# np[j]*m1
+	algr	$nlo,$NHI
+	lghi	$NHI,0
+	alcgr	$nhi,$NHI	# +="tp[j]"
+	algr	$nlo,$alo
+	alcgr	$NHI,$nhi
+
+	stg	$nlo,160-8($j,$sp)	# tp[j-1]=
+	la	$j,8($j)	# j++
+	brct	$count,.L1st
+
+	algr	$NHI,$AHI
+	lghi	$AHI,0
+	alcgr	$AHI,$AHI	# upmost overflow bit
+	stg	$NHI,160-8($j,$sp)
+	stg	$AHI,160($j,$sp)
+	la	$bp,8($bp)	# bp++
+
+.Louter:
+	lg	$bi,0($bp)	# bp[i]
+	lg	$alo,0($ap)
+	mlgr	$ahi,$bi	# ap[0]*bp[i]
+	alg	$alo,160($sp)	# +=tp[0]
+	lghi	$AHI,0
+	alcgr	$AHI,$ahi
+
+	lgr	$mn0,$alo
+	msgr	$mn0,$n0	# tp[0]*n0
+
+	lg	$nlo,0($np)	# np[0]
+	mlgr	$nhi,$mn0	# np[0]*m1
+	algr	$nlo,$alo	# +="tp[0]"
+	lghi	$NHI,0
+	alcgr	$NHI,$nhi
+
+	la	$j,8(%r0)	# j=1
+	lr	$count,$num
+
+.align	16
+.Linner:
+	lg	$alo,0($j,$ap)
+	mlgr	$ahi,$bi	# ap[j]*bp[i]
+	algr	$alo,$AHI
+	lghi	$AHI,0
+	alcgr	$ahi,$AHI
+	alg	$alo,160($j,$sp)# +=tp[j]
+	alcgr	$AHI,$ahi
+
+	lg	$nlo,0($j,$np)
+	mlgr	$nhi,$mn0	# np[j]*m1
+	algr	$nlo,$NHI
+	lghi	$NHI,0
+	alcgr	$nhi,$NHI
+	algr	$nlo,$alo	# +="tp[j]"
+	alcgr	$NHI,$nhi
+
+	stg	$nlo,160-8($j,$sp)	# tp[j-1]=
+	la	$j,8($j)	# j++
+	brct	$count,.Linner
+
+	algr	$NHI,$AHI
+	lghi	$AHI,0
+	alcgr	$AHI,$AHI
+	alg	$NHI,160($j,$sp)# accumulate previous upmost overflow bit
+	lghi	$ahi,0
+	alcgr	$AHI,$ahi	# new upmost overflow bit
+	stg	$NHI,160-8($j,$sp)
+	stg	$AHI,160($j,$sp)
+
+	la	$bp,8($bp)	# bp++
+	clg	$bp,160+8+32($j,$sp)	# compare to &bp[num]
+	jne	.Louter
+
+	lg	$rp,160+8+16($j,$sp)	# reincarnate rp
+	la	$ap,160($sp)
+	ahi	$num,1		# restore $num, incidentally clears "borrow"
+
+	la	$j,0(%r0)
+	lr	$count,$num
+.Lsub:	lg	$alo,0($j,$ap)
+	slbg	$alo,0($j,$np)
+	stg	$alo,0($j,$rp)
+	la	$j,8($j)
+	brct	$count,.Lsub
+	lghi	$ahi,0
+	slbgr	$AHI,$ahi	# handle upmost carry
+
+	ngr	$ap,$AHI
+	lghi	$np,-1
+	xgr	$np,$AHI
+	ngr	$np,$rp
+	ogr	$ap,$np		# ap=borrow?tp:rp
+
+	la	$j,0(%r0)
+	lgr	$count,$num
+.Lcopy:	lg	$alo,0($j,$ap)	# copy or in-place refresh
+	stg	$j,160($j,$sp)	# zap tp
+	stg	$alo,0($j,$rp)
+	la	$j,8($j)
+	brct	$count,.Lcopy
+
+	la	%r1,160+8+48($j,$sp)
+	lmg	%r6,%r15,0(%r1)
+	lghi	%r2,1		# signal "processed"
+	br	%r14
+.size	bn_mul_mont,.-bn_mul_mont
+.string	"Montgomery Multiplication for s390x, CRYPTOGAMS by <appro\@openssl.org>"
+___
+
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/s390x.S b/app/openssl/crypto/bn/asm/s390x.S
new file mode 100755
index 00000000..43fcb79b
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/s390x.S
@@ -0,0 +1,678 @@
+.ident "s390x.S, version 1.1"
+// ====================================================================
+// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+// project.
+//
+// Rights for redistribution and usage in source and binary forms are
+// granted according to the OpenSSL license. Warranty of any kind is
+// disclaimed.
+// ====================================================================
+
+.text
+
+#define zero	%r0
+
+// BN_ULONG bn_mul_add_words(BN_ULONG *r2,BN_ULONG *r3,int r4,BN_ULONG r5);
+.globl	bn_mul_add_words
+.type	bn_mul_add_words,@function
+.align	4
+bn_mul_add_words:
+	lghi	zero,0		// zero = 0
+	la	%r1,0(%r2)	// put rp aside
+	lghi	%r2,0		// i=0;
+	ltgfr	%r4,%r4
+	bler	%r14		// if (len<=0) return 0;
+
+	stmg	%r6,%r10,48(%r15)
+	lghi	%r10,3
+	lghi	%r8,0		// carry = 0
+	nr	%r10,%r4	// len%4
+	sra	%r4,2		// cnt=len/4
+	jz	.Loop1_madd	// carry is incidentally cleared if branch taken
+	algr	zero,zero	// clear carry
+
+.Loop4_madd:
+	lg	%r7,0(%r2,%r3)	// ap[i]
+	mlgr	%r6,%r5		// *=w
+	alcgr	%r7,%r8		// +=carry
+	alcgr	%r6,zero
+	alg	%r7,0(%r2,%r1)	// +=rp[i]
+	stg	%r7,0(%r2,%r1)	// rp[i]=
+
+	lg	%r9,8(%r2,%r3)
+	mlgr	%r8,%r5
+	alcgr	%r9,%r6
+	alcgr	%r8,zero
+	alg	%r9,8(%r2,%r1)
+	stg	%r9,8(%r2,%r1)
+
+	lg	%r7,16(%r2,%r3)
+	mlgr	%r6,%r5
+	alcgr	%r7,%r8
+	alcgr	%r6,zero
+	alg	%r7,16(%r2,%r1)
+	stg	%r7,16(%r2,%r1)
+
+	lg	%r9,24(%r2,%r3)
+	mlgr	%r8,%r5
+	alcgr	%r9,%r6
+	alcgr	%r8,zero
+	alg	%r9,24(%r2,%r1)
+	stg	%r9,24(%r2,%r1)
+
+	la	%r2,32(%r2)	// i+=4
+	brct	%r4,.Loop4_madd
+
+	la	%r10,1(%r10)		// see if len%4 is zero ...
+	brct	%r10,.Loop1_madd	// without touching condition code:-)
+
+.Lend_madd:
+	alcgr	%r8,zero	// collect carry bit
+	lgr	%r2,%r8
+	lmg	%r6,%r10,48(%r15)
+	br	%r14
+
+.Loop1_madd:
+	lg	%r7,0(%r2,%r3)	// ap[i]
+	mlgr	%r6,%r5		// *=w
+	alcgr	%r7,%r8		// +=carry
+	alcgr	%r6,zero
+	alg	%r7,0(%r2,%r1)	// +=rp[i]
+	stg	%r7,0(%r2,%r1)	// rp[i]=
+
+	lgr	%r8,%r6
+	la	%r2,8(%r2)	// i++
+	brct	%r10,.Loop1_madd
+
+	j	.Lend_madd
+.size	bn_mul_add_words,.-bn_mul_add_words
+
+// BN_ULONG bn_mul_words(BN_ULONG *r2,BN_ULONG *r3,int r4,BN_ULONG r5);
+.globl	bn_mul_words
+.type	bn_mul_words,@function
+.align	4
+bn_mul_words:
+	lghi	zero,0		// zero = 0
+	la	%r1,0(%r2)	// put rp aside
+	lghi	%r2,0		// i=0;
+	ltgfr	%r4,%r4
+	bler	%r14		// if (len<=0) return 0;
+
+	stmg	%r6,%r10,48(%r15)
+	lghi	%r10,3
+	lghi	%r8,0		// carry = 0
+	nr	%r10,%r4	// len%4
+	sra	%r4,2		// cnt=len/4
+	jz	.Loop1_mul	// carry is incidentally cleared if branch taken
+	algr	zero,zero	// clear carry
+
+.Loop4_mul:
+	lg	%r7,0(%r2,%r3)	// ap[i]
+	mlgr	%r6,%r5		// *=w
+	alcgr	%r7,%r8		// +=carry
+	stg	%r7,0(%r2,%r1)	// rp[i]=
+
+	lg	%r9,8(%r2,%r3)
+	mlgr	%r8,%r5
+	alcgr	%r9,%r6
+	stg	%r9,8(%r2,%r1)
+
+	lg	%r7,16(%r2,%r3)
+	mlgr	%r6,%r5
+	alcgr	%r7,%r8
+	stg	%r7,16(%r2,%r1)
+
+	lg	%r9,24(%r2,%r3)
+	mlgr	%r8,%r5
+	alcgr	%r9,%r6
+	stg	%r9,24(%r2,%r1)
+
+	la	%r2,32(%r2)	// i+=4
+	brct	%r4,.Loop4_mul
+
+	la	%r10,1(%r10)		// see if len%4 is zero ...
+	brct	%r10,.Loop1_mul		// without touching condition code:-)
+
+.Lend_mul:
+	alcgr	%r8,zero	// collect carry bit
+	lgr	%r2,%r8
+	lmg	%r6,%r10,48(%r15)
+	br	%r14
+
+.Loop1_mul:
+	lg	%r7,0(%r2,%r3)	// ap[i]
+	mlgr	%r6,%r5		// *=w
+	alcgr	%r7,%r8		// +=carry
+	stg	%r7,0(%r2,%r1)	// rp[i]=
+
+	lgr	%r8,%r6
+	la	%r2,8(%r2)	// i++
+	brct	%r10,.Loop1_mul
+
+	j	.Lend_mul
+.size	bn_mul_words,.-bn_mul_words
+
+// void bn_sqr_words(BN_ULONG *r2,BN_ULONG *r2,int r4)
+.globl	bn_sqr_words
+.type	bn_sqr_words,@function
+.align	4
+bn_sqr_words:
+	ltgfr	%r4,%r4
+	bler	%r14
+
+	stmg	%r6,%r7,48(%r15)
+	srag	%r1,%r4,2	// cnt=len/4
+	jz	.Loop1_sqr
+
+.Loop4_sqr:
+	lg	%r7,0(%r3)
+	mlgr	%r6,%r7
+	stg	%r7,0(%r2)
+	stg	%r6,8(%r2)
+
+	lg	%r7,8(%r3)
+	mlgr	%r6,%r7
+	stg	%r7,16(%r2)
+	stg	%r6,24(%r2)
+
+	lg	%r7,16(%r3)
+	mlgr	%r6,%r7
+	stg	%r7,32(%r2)
+	stg	%r6,40(%r2)
+
+	lg	%r7,24(%r3)
+	mlgr	%r6,%r7
+	stg	%r7,48(%r2)
+	stg	%r6,56(%r2)
+
+	la	%r3,32(%r3)
+	la	%r2,64(%r2)
+	brct	%r1,.Loop4_sqr
+
+	lghi	%r1,3
+	nr	%r4,%r1		// cnt=len%4
+	jz	.Lend_sqr
+
+.Loop1_sqr:
+	lg	%r7,0(%r3)
+	mlgr	%r6,%r7
+	stg	%r7,0(%r2)
+	stg	%r6,8(%r2)
+
+	la	%r3,8(%r3)
+	la	%r2,16(%r2)
+	brct	%r4,.Loop1_sqr
+
+.Lend_sqr:
+	lmg	%r6,%r7,48(%r15)
+	br	%r14
+.size	bn_sqr_words,.-bn_sqr_words
+
+// BN_ULONG bn_div_words(BN_ULONG h,BN_ULONG l,BN_ULONG d);
+.globl	bn_div_words
+.type	bn_div_words,@function
+.align	4
+bn_div_words:
+	dlgr	%r2,%r4
+	lgr	%r2,%r3
+	br	%r14
+.size	bn_div_words,.-bn_div_words
+
+// BN_ULONG bn_add_words(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4,int r5);
+.globl	bn_add_words
+.type	bn_add_words,@function
+.align	4
+bn_add_words:
+	la	%r1,0(%r2)	// put rp aside
+	lghi	%r2,0		// i=0
+	ltgfr	%r5,%r5
+	bler	%r14		// if (len<=0) return 0;
+
+	stg	%r6,48(%r15)
+	lghi	%r6,3
+	nr	%r6,%r5		// len%4
+	sra	%r5,2		// len/4, use sra because it sets condition code
+	jz	.Loop1_add	// carry is incidentally cleared if branch taken
+	algr	%r2,%r2		// clear carry
+
+.Loop4_add:
+	lg	%r0,0(%r2,%r3)
+	alcg	%r0,0(%r2,%r4)
+	stg	%r0,0(%r2,%r1)
+	lg	%r0,8(%r2,%r3)
+	alcg	%r0,8(%r2,%r4)
+	stg	%r0,8(%r2,%r1)
+	lg	%r0,16(%r2,%r3)
+	alcg	%r0,16(%r2,%r4)
+	stg	%r0,16(%r2,%r1)
+	lg	%r0,24(%r2,%r3)
+	alcg	%r0,24(%r2,%r4)
+	stg	%r0,24(%r2,%r1)
+
+	la	%r2,32(%r2)	// i+=4
+	brct	%r5,.Loop4_add
+
+	la	%r6,1(%r6)	// see if len%4 is zero ...
+	brct	%r6,.Loop1_add	// without touching condition code:-)
+
+.Lexit_add:
+	lghi	%r2,0
+	alcgr	%r2,%r2
+	lg	%r6,48(%r15)
+	br	%r14
+
+.Loop1_add:
+	lg	%r0,0(%r2,%r3)
+	alcg	%r0,0(%r2,%r4)
+	stg	%r0,0(%r2,%r1)
+
+	la	%r2,8(%r2)	// i++
+	brct	%r6,.Loop1_add
+
+	j	.Lexit_add
+.size	bn_add_words,.-bn_add_words
+
+// BN_ULONG bn_sub_words(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4,int r5);
+.globl	bn_sub_words
+.type	bn_sub_words,@function
+.align	4
+bn_sub_words:
+	la	%r1,0(%r2)	// put rp aside
+	lghi	%r2,0		// i=0
+	ltgfr	%r5,%r5
+	bler	%r14		// if (len<=0) return 0;
+
+	stg	%r6,48(%r15)
+	lghi	%r6,3
+	nr	%r6,%r5		// len%4
+	sra	%r5,2		// len/4, use sra because it sets condition code
+	jnz	.Loop4_sub	// borrow is incidentally cleared if branch taken
+	slgr	%r2,%r2		// clear borrow
+
+.Loop1_sub:
+	lg	%r0,0(%r2,%r3)
+	slbg	%r0,0(%r2,%r4)
+	stg	%r0,0(%r2,%r1)
+
+	la	%r2,8(%r2)	// i++
+	brct	%r6,.Loop1_sub
+	j	.Lexit_sub
+
+.Loop4_sub:
+	lg	%r0,0(%r2,%r3)
+	slbg	%r0,0(%r2,%r4)
+	stg	%r0,0(%r2,%r1)
+	lg	%r0,8(%r2,%r3)
+	slbg	%r0,8(%r2,%r4)
+	stg	%r0,8(%r2,%r1)
+	lg	%r0,16(%r2,%r3)
+	slbg	%r0,16(%r2,%r4)
+	stg	%r0,16(%r2,%r1)
+	lg	%r0,24(%r2,%r3)
+	slbg	%r0,24(%r2,%r4)
+	stg	%r0,24(%r2,%r1)
+
+	la	%r2,32(%r2)	// i+=4
+	brct	%r5,.Loop4_sub
+
+	la	%r6,1(%r6)	// see if len%4 is zero ...
+	brct	%r6,.Loop1_sub	// without touching condition code:-)
+
+.Lexit_sub:
+	lghi	%r2,0
+	slbgr	%r2,%r2
+	lcgr	%r2,%r2
+	lg	%r6,48(%r15)
+	br	%r14
+.size	bn_sub_words,.-bn_sub_words
+
+#define c1	%r1
+#define c2	%r5
+#define c3	%r8
+
+#define mul_add_c(ai,bi,c1,c2,c3)	\
+	lg	%r7,ai*8(%r3);		\
+	mlg	%r6,bi*8(%r4);		\
+	algr	c1,%r7;			\
+	alcgr	c2,%r6;			\
+	alcgr	c3,zero
+
+// void bn_mul_comba8(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4);
+.globl	bn_mul_comba8
+.type	bn_mul_comba8,@function
+.align	4
+bn_mul_comba8:
+	stmg	%r6,%r8,48(%r15)
+
+	lghi	c1,0
+	lghi	c2,0
+	lghi	c3,0
+	lghi	zero,0
+
+	mul_add_c(0,0,c1,c2,c3);
+	stg	c1,0*8(%r2)
+	lghi	c1,0
+
+	mul_add_c(0,1,c2,c3,c1);
+	mul_add_c(1,0,c2,c3,c1);
+	stg	c2,1*8(%r2)
+	lghi	c2,0
+
+	mul_add_c(2,0,c3,c1,c2);
+	mul_add_c(1,1,c3,c1,c2);
+	mul_add_c(0,2,c3,c1,c2);
+	stg	c3,2*8(%r2)
+	lghi	c3,0
+
+	mul_add_c(0,3,c1,c2,c3);
+	mul_add_c(1,2,c1,c2,c3);
+	mul_add_c(2,1,c1,c2,c3);
+	mul_add_c(3,0,c1,c2,c3);
+	stg	c1,3*8(%r2)
+	lghi	c1,0
+
+	mul_add_c(4,0,c2,c3,c1);
+	mul_add_c(3,1,c2,c3,c1);
+	mul_add_c(2,2,c2,c3,c1);
+	mul_add_c(1,3,c2,c3,c1);
+	mul_add_c(0,4,c2,c3,c1);
+	stg	c2,4*8(%r2)
+	lghi	c2,0
+
+	mul_add_c(0,5,c3,c1,c2);
+	mul_add_c(1,4,c3,c1,c2);
+	mul_add_c(2,3,c3,c1,c2);
+	mul_add_c(3,2,c3,c1,c2);
+	mul_add_c(4,1,c3,c1,c2);
+	mul_add_c(5,0,c3,c1,c2);
+	stg	c3,5*8(%r2)
+	lghi	c3,0
+
+	mul_add_c(6,0,c1,c2,c3);
+	mul_add_c(5,1,c1,c2,c3);
+	mul_add_c(4,2,c1,c2,c3);
+	mul_add_c(3,3,c1,c2,c3);
+	mul_add_c(2,4,c1,c2,c3);
+	mul_add_c(1,5,c1,c2,c3);
+	mul_add_c(0,6,c1,c2,c3);
+	stg	c1,6*8(%r2)
+	lghi	c1,0
+
+	mul_add_c(0,7,c2,c3,c1);
+	mul_add_c(1,6,c2,c3,c1);
+	mul_add_c(2,5,c2,c3,c1);
+	mul_add_c(3,4,c2,c3,c1);
+	mul_add_c(4,3,c2,c3,c1);
+	mul_add_c(5,2,c2,c3,c1);
+	mul_add_c(6,1,c2,c3,c1);
+	mul_add_c(7,0,c2,c3,c1);
+	stg	c2,7*8(%r2)
+	lghi	c2,0
+
+	mul_add_c(7,1,c3,c1,c2);
+	mul_add_c(6,2,c3,c1,c2);
+	mul_add_c(5,3,c3,c1,c2);
+	mul_add_c(4,4,c3,c1,c2);
+	mul_add_c(3,5,c3,c1,c2);
+	mul_add_c(2,6,c3,c1,c2);
+	mul_add_c(1,7,c3,c1,c2);
+	stg	c3,8*8(%r2)
+	lghi	c3,0
+
+	mul_add_c(2,7,c1,c2,c3);
+	mul_add_c(3,6,c1,c2,c3);
+	mul_add_c(4,5,c1,c2,c3);
+	mul_add_c(5,4,c1,c2,c3);
+	mul_add_c(6,3,c1,c2,c3);
+	mul_add_c(7,2,c1,c2,c3);
+	stg	c1,9*8(%r2)
+	lghi	c1,0
+
+	mul_add_c(7,3,c2,c3,c1);
+	mul_add_c(6,4,c2,c3,c1);
+	mul_add_c(5,5,c2,c3,c1);
+	mul_add_c(4,6,c2,c3,c1);
+	mul_add_c(3,7,c2,c3,c1);
+	stg	c2,10*8(%r2)
+	lghi	c2,0
+
+	mul_add_c(4,7,c3,c1,c2);
+	mul_add_c(5,6,c3,c1,c2);
+	mul_add_c(6,5,c3,c1,c2);
+	mul_add_c(7,4,c3,c1,c2);
+	stg	c3,11*8(%r2)
+	lghi	c3,0
+
+	mul_add_c(7,5,c1,c2,c3);
+	mul_add_c(6,6,c1,c2,c3);
+	mul_add_c(5,7,c1,c2,c3);
+	stg	c1,12*8(%r2)
+	lghi	c1,0
+
+
+	mul_add_c(6,7,c2,c3,c1);
+	mul_add_c(7,6,c2,c3,c1);
+	stg	c2,13*8(%r2)
+	lghi	c2,0
+
+	mul_add_c(7,7,c3,c1,c2);
+	stg	c3,14*8(%r2)
+	stg	c1,15*8(%r2)
+
+	lmg	%r6,%r8,48(%r15)
+	br	%r14
+.size	bn_mul_comba8,.-bn_mul_comba8
+
+// void bn_mul_comba4(BN_ULONG *r2,BN_ULONG *r3,BN_ULONG *r4);
+.globl	bn_mul_comba4
+.type	bn_mul_comba4,@function
+.align	4
+bn_mul_comba4:
+	stmg	%r6,%r8,48(%r15)
+
+	lghi	c1,0
+	lghi	c2,0
+	lghi	c3,0
+	lghi	zero,0
+
+	mul_add_c(0,0,c1,c2,c3);
+	stg	c1,0*8(%r3)
+	lghi	c1,0
+
+	mul_add_c(0,1,c2,c3,c1);
+	mul_add_c(1,0,c2,c3,c1);
+	stg	c2,1*8(%r2)
+	lghi	c2,0
+
+	mul_add_c(2,0,c3,c1,c2);
+	mul_add_c(1,1,c3,c1,c2);
+	mul_add_c(0,2,c3,c1,c2);
+	stg	c3,2*8(%r2)
+	lghi	c3,0
+
+	mul_add_c(0,3,c1,c2,c3);
+	mul_add_c(1,2,c1,c2,c3);
+	mul_add_c(2,1,c1,c2,c3);
+	mul_add_c(3,0,c1,c2,c3);
+	stg	c1,3*8(%r2)
+	lghi	c1,0
+
+	mul_add_c(3,1,c2,c3,c1);
+	mul_add_c(2,2,c2,c3,c1);
+	mul_add_c(1,3,c2,c3,c1);
+	stg	c2,4*8(%r2)
+	lghi	c2,0
+
+	mul_add_c(2,3,c3,c1,c2);
+	mul_add_c(3,2,c3,c1,c2);
+	stg	c3,5*8(%r2)
+	lghi	c3,0
+
+	mul_add_c(3,3,c1,c2,c3);
+	stg	c1,6*8(%r2)
+	stg	c2,7*8(%r2)
+
+	stmg	%r6,%r8,48(%r15)
+	br	%r14
+.size	bn_mul_comba4,.-bn_mul_comba4
+
+#define sqr_add_c(ai,c1,c2,c3)		\
+	lg	%r7,ai*8(%r3);		\
+	mlgr	%r6,%r7;		\
+	algr	c1,%r7;			\
+	alcgr	c2,%r6;			\
+	alcgr	c3,zero
+
+#define sqr_add_c2(ai,aj,c1,c2,c3)	\
+	lg	%r7,ai*8(%r3);		\
+	mlg	%r6,aj*8(%r3);		\
+	algr	c1,%r7;			\
+	alcgr	c2,%r6;			\
+	alcgr	c3,zero;		\
+	algr	c1,%r7;			\
+	alcgr	c2,%r6;			\
+	alcgr	c3,zero
+
+// void bn_sqr_comba8(BN_ULONG *r2,BN_ULONG *r3);
+.globl	bn_sqr_comba8
+.type	bn_sqr_comba8,@function
+.align	4
+bn_sqr_comba8:
+	stmg	%r6,%r8,48(%r15)
+
+	lghi	c1,0
+	lghi	c2,0
+	lghi	c3,0
+	lghi	zero,0
+
+	sqr_add_c(0,c1,c2,c3);
+	stg	c1,0*8(%r2)
+	lghi	c1,0
+
+	sqr_add_c2(1,0,c2,c3,c1);
+	stg	c2,1*8(%r2)
+	lghi	c2,0
+
+	sqr_add_c(1,c3,c1,c2);
+	sqr_add_c2(2,0,c3,c1,c2);
+	stg	c3,2*8(%r2)
+	lghi	c3,0
+
+	sqr_add_c2(3,0,c1,c2,c3);
+	sqr_add_c2(2,1,c1,c2,c3);
+	stg	c1,3*8(%r2)
+	lghi	c1,0
+
+	sqr_add_c(2,c2,c3,c1);
+	sqr_add_c2(3,1,c2,c3,c1);
+	sqr_add_c2(4,0,c2,c3,c1);
+	stg	c2,4*8(%r2)
+	lghi	c2,0
+
+	sqr_add_c2(5,0,c3,c1,c2);
+	sqr_add_c2(4,1,c3,c1,c2);
+	sqr_add_c2(3,2,c3,c1,c2);
+	stg	c3,5*8(%r2)
+	lghi	c3,0
+
+	sqr_add_c(3,c1,c2,c3);
+	sqr_add_c2(4,2,c1,c2,c3);
+	sqr_add_c2(5,1,c1,c2,c3);
+	sqr_add_c2(6,0,c1,c2,c3);
+	stg	c1,6*8(%r2)
+	lghi	c1,0
+
+	sqr_add_c2(7,0,c2,c3,c1);
+	sqr_add_c2(6,1,c2,c3,c1);
+	sqr_add_c2(5,2,c2,c3,c1);
+	sqr_add_c2(4,3,c2,c3,c1);
+	stg	c2,7*8(%r2)
+	lghi	c2,0
+
+	sqr_add_c(4,c3,c1,c2);
+	sqr_add_c2(5,3,c3,c1,c2);
+	sqr_add_c2(6,2,c3,c1,c2);
+	sqr_add_c2(7,1,c3,c1,c2);
+	stg	c3,8*8(%r2)
+	lghi	c3,0
+
+	sqr_add_c2(7,2,c1,c2,c3);
+	sqr_add_c2(6,3,c1,c2,c3);
+	sqr_add_c2(5,4,c1,c2,c3);
+	stg	c1,9*8(%r2)
+	lghi	c1,0
+
+	sqr_add_c(5,c2,c3,c1);
+	sqr_add_c2(6,4,c2,c3,c1);
+	sqr_add_c2(7,3,c2,c3,c1);
+	stg	c2,10*8(%r2)
+	lghi	c2,0
+
+	sqr_add_c2(7,4,c3,c1,c2);
+	sqr_add_c2(6,5,c3,c1,c2);
+	stg	c3,11*8(%r2)
+	lghi	c3,0
+
+	sqr_add_c(6,c1,c2,c3);
+	sqr_add_c2(7,5,c1,c2,c3);
+	stg	c1,12*8(%r2)
+	lghi	c1,0
+
+	sqr_add_c2(7,6,c2,c3,c1);
+	stg	c2,13*8(%r2)
+	lghi	c2,0
+
+	sqr_add_c(7,c3,c1,c2);
+	stg	c3,14*8(%r2)
+	stg	c1,15*8(%r2)
+
+	lmg	%r6,%r8,48(%r15)
+	br	%r14
+.size	bn_sqr_comba8,.-bn_sqr_comba8
+
+// void bn_sqr_comba4(BN_ULONG *r2,BN_ULONG *r3);
+.globl bn_sqr_comba4
+.type	bn_sqr_comba4,@function
+.align	4
+bn_sqr_comba4:
+	stmg	%r6,%r8,48(%r15)
+
+	lghi	c1,0
+	lghi	c2,0
+	lghi	c3,0
+	lghi	zero,0
+
+	sqr_add_c(0,c1,c2,c3);
+	stg	c1,0*8(%r2)
+	lghi	c1,0
+
+	sqr_add_c2(1,0,c2,c3,c1);
+	stg	c2,1*8(%r2)
+	lghi	c2,0
+
+	sqr_add_c(1,c3,c1,c2);
+	sqr_add_c2(2,0,c3,c1,c2);
+	stg	c3,2*8(%r2)
+	lghi	c3,0
+
+	sqr_add_c2(3,0,c1,c2,c3);
+	sqr_add_c2(2,1,c1,c2,c3);
+	stg	c1,3*8(%r2)
+	lghi	c1,0
+
+	sqr_add_c(2,c2,c3,c1);
+	sqr_add_c2(3,1,c2,c3,c1);
+	stg	c2,4*8(%r2)
+	lghi	c2,0
+
+	sqr_add_c2(3,2,c3,c1,c2);
+	stg	c3,5*8(%r2)
+	lghi	c3,0
+
+	sqr_add_c(3,c1,c2,c3);
+	stg	c1,6*8(%r2)
+	stg	c2,7*8(%r2)
+
+	lmg	%r6,%r8,48(%r15)
+	br	%r14
+.size	bn_sqr_comba4,.-bn_sqr_comba4
diff --git a/app/openssl/crypto/bn/asm/sparcv8.S b/app/openssl/crypto/bn/asm/sparcv8.S
new file mode 100644
index 00000000..88c5dc48
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/sparcv8.S
@@ -0,0 +1,1458 @@
+.ident	"sparcv8.s, Version 1.4"
+.ident	"SPARC v8 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+
+/*
+ * ====================================================================
+ * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+ * project.
+ *
+ * Rights for redistribution and usage in source and binary forms are
+ * granted according to the OpenSSL license. Warranty of any kind is
+ * disclaimed.
+ * ====================================================================
+ */
+
+/*
+ * This is my modest contributon to OpenSSL project (see
+ * http://www.openssl.org/ for more information about it) and is
+ * a drop-in SuperSPARC ISA replacement for crypto/bn/bn_asm.c
+ * module. For updates see http://fy.chalmers.se/~appro/hpe/.
+ *
+ * See bn_asm.sparc.v8plus.S for more details.
+ */
+
+/*
+ * Revision history.
+ *
+ * 1.1	- new loop unrolling model(*);
+ * 1.2	- made gas friendly;
+ * 1.3	- fixed problem with /usr/ccs/lib/cpp;
+ * 1.4	- some retunes;
+ *
+ * (*)	see bn_asm.sparc.v8plus.S for details
+ */
+
+.section	".text",#alloc,#execinstr
+.file		"bn_asm.sparc.v8.S"
+
+.align	32
+
+.global bn_mul_add_words
+/*
+ * BN_ULONG bn_mul_add_words(rp,ap,num,w)
+ * BN_ULONG *rp,*ap;
+ * int num;
+ * BN_ULONG w;
+ */
+bn_mul_add_words:
+	cmp	%o2,0
+	bg,a	.L_bn_mul_add_words_proceed
+	ld	[%o1],%g2
+	retl
+	clr	%o0
+
+.L_bn_mul_add_words_proceed:
+	andcc	%o2,-4,%g0
+	bz	.L_bn_mul_add_words_tail
+	clr	%o5
+
+.L_bn_mul_add_words_loop:
+	ld	[%o0],%o4
+	ld	[%o1+4],%g3
+	umul	%o3,%g2,%g2
+	rd	%y,%g1
+	addcc	%o4,%o5,%o4
+	addx	%g1,0,%g1
+	addcc	%o4,%g2,%o4
+	st	%o4,[%o0]
+	addx	%g1,0,%o5
+
+	ld	[%o0+4],%o4
+	ld	[%o1+8],%g2
+	umul	%o3,%g3,%g3
+	dec	4,%o2
+	rd	%y,%g1
+	addcc	%o4,%o5,%o4
+	addx	%g1,0,%g1
+	addcc	%o4,%g3,%o4
+	st	%o4,[%o0+4]
+	addx	%g1,0,%o5
+
+	ld	[%o0+8],%o4
+	ld	[%o1+12],%g3
+	umul	%o3,%g2,%g2
+	inc	16,%o1
+	rd	%y,%g1
+	addcc	%o4,%o5,%o4
+	addx	%g1,0,%g1
+	addcc	%o4,%g2,%o4
+	st	%o4,[%o0+8]
+	addx	%g1,0,%o5
+
+	ld	[%o0+12],%o4
+	umul	%o3,%g3,%g3
+	inc	16,%o0
+	rd	%y,%g1
+	addcc	%o4,%o5,%o4
+	addx	%g1,0,%g1
+	addcc	%o4,%g3,%o4
+	st	%o4,[%o0-4]
+	addx	%g1,0,%o5
+	andcc	%o2,-4,%g0
+	bnz,a	.L_bn_mul_add_words_loop
+	ld	[%o1],%g2
+
+	tst	%o2
+	bnz,a	.L_bn_mul_add_words_tail
+	ld	[%o1],%g2
+.L_bn_mul_add_words_return:
+	retl
+	mov	%o5,%o0
+	nop
+
+.L_bn_mul_add_words_tail:
+	ld	[%o0],%o4
+	umul	%o3,%g2,%g2
+	addcc	%o4,%o5,%o4
+	rd	%y,%g1
+	addx	%g1,0,%g1
+	addcc	%o4,%g2,%o4
+	addx	%g1,0,%o5
+	deccc	%o2
+	bz	.L_bn_mul_add_words_return
+	st	%o4,[%o0]
+
+	ld	[%o1+4],%g2
+	ld	[%o0+4],%o4
+	umul	%o3,%g2,%g2
+	rd	%y,%g1
+	addcc	%o4,%o5,%o4
+	addx	%g1,0,%g1
+	addcc	%o4,%g2,%o4
+	addx	%g1,0,%o5
+	deccc	%o2
+	bz	.L_bn_mul_add_words_return
+	st	%o4,[%o0+4]
+
+	ld	[%o1+8],%g2
+	ld	[%o0+8],%o4
+	umul	%o3,%g2,%g2
+	rd	%y,%g1
+	addcc	%o4,%o5,%o4
+	addx	%g1,0,%g1
+	addcc	%o4,%g2,%o4
+	st	%o4,[%o0+8]
+	retl
+	addx	%g1,0,%o0
+
+.type	bn_mul_add_words,#function
+.size	bn_mul_add_words,(.-bn_mul_add_words)
+
+.align	32
+
+.global bn_mul_words
+/*
+ * BN_ULONG bn_mul_words(rp,ap,num,w)
+ * BN_ULONG *rp,*ap;
+ * int num;
+ * BN_ULONG w;
+ */
+bn_mul_words:
+	cmp	%o2,0
+	bg,a	.L_bn_mul_words_proceeed
+	ld	[%o1],%g2
+	retl
+	clr	%o0
+
+.L_bn_mul_words_proceeed:
+	andcc	%o2,-4,%g0
+	bz	.L_bn_mul_words_tail
+	clr	%o5
+
+.L_bn_mul_words_loop:
+	ld	[%o1+4],%g3
+	umul	%o3,%g2,%g2
+	addcc	%g2,%o5,%g2
+	rd	%y,%g1
+	addx	%g1,0,%o5
+	st	%g2,[%o0]
+
+	ld	[%o1+8],%g2
+	umul	%o3,%g3,%g3
+	addcc	%g3,%o5,%g3
+	rd	%y,%g1
+	dec	4,%o2
+	addx	%g1,0,%o5
+	st	%g3,[%o0+4]
+
+	ld	[%o1+12],%g3
+	umul	%o3,%g2,%g2
+	addcc	%g2,%o5,%g2
+	rd	%y,%g1
+	inc	16,%o1
+	st	%g2,[%o0+8]
+	addx	%g1,0,%o5
+
+	umul	%o3,%g3,%g3
+	addcc	%g3,%o5,%g3
+	rd	%y,%g1
+	inc	16,%o0
+	addx	%g1,0,%o5
+	st	%g3,[%o0-4]
+	andcc	%o2,-4,%g0
+	nop
+	bnz,a	.L_bn_mul_words_loop
+	ld	[%o1],%g2
+
+	tst	%o2
+	bnz,a	.L_bn_mul_words_tail
+	ld	[%o1],%g2
+.L_bn_mul_words_return:
+	retl
+	mov	%o5,%o0
+	nop
+
+.L_bn_mul_words_tail:
+	umul	%o3,%g2,%g2
+	addcc	%g2,%o5,%g2
+	rd	%y,%g1
+	addx	%g1,0,%o5
+	deccc	%o2
+	bz	.L_bn_mul_words_return
+	st	%g2,[%o0]
+	nop
+
+	ld	[%o1+4],%g2
+	umul	%o3,%g2,%g2
+	addcc	%g2,%o5,%g2
+	rd	%y,%g1
+	addx	%g1,0,%o5
+	deccc	%o2
+	bz	.L_bn_mul_words_return
+	st	%g2,[%o0+4]
+
+	ld	[%o1+8],%g2
+	umul	%o3,%g2,%g2
+	addcc	%g2,%o5,%g2
+	rd	%y,%g1
+	st	%g2,[%o0+8]
+	retl
+	addx	%g1,0,%o0
+
+.type	bn_mul_words,#function
+.size	bn_mul_words,(.-bn_mul_words)
+
+.align  32
+.global	bn_sqr_words
+/*
+ * void bn_sqr_words(r,a,n)
+ * BN_ULONG *r,*a;
+ * int n;
+ */
+bn_sqr_words:
+	cmp	%o2,0
+	bg,a	.L_bn_sqr_words_proceeed
+	ld	[%o1],%g2
+	retl
+	clr	%o0
+
+.L_bn_sqr_words_proceeed:
+	andcc	%o2,-4,%g0
+	bz	.L_bn_sqr_words_tail
+	clr	%o5
+
+.L_bn_sqr_words_loop:
+	ld	[%o1+4],%g3
+	umul	%g2,%g2,%o4
+	st	%o4,[%o0]
+	rd	%y,%o5
+	st	%o5,[%o0+4]
+
+	ld	[%o1+8],%g2
+	umul	%g3,%g3,%o4
+	dec	4,%o2
+	st	%o4,[%o0+8]
+	rd	%y,%o5
+	st	%o5,[%o0+12]
+	nop
+
+	ld	[%o1+12],%g3
+	umul	%g2,%g2,%o4
+	st	%o4,[%o0+16]
+	rd	%y,%o5
+	inc	16,%o1
+	st	%o5,[%o0+20]
+
+	umul	%g3,%g3,%o4
+	inc	32,%o0
+	st	%o4,[%o0-8]
+	rd	%y,%o5
+	st	%o5,[%o0-4]
+	andcc	%o2,-4,%g2
+	bnz,a	.L_bn_sqr_words_loop
+	ld	[%o1],%g2
+
+	tst	%o2
+	nop
+	bnz,a	.L_bn_sqr_words_tail
+	ld	[%o1],%g2
+.L_bn_sqr_words_return:
+	retl
+	clr	%o0
+
+.L_bn_sqr_words_tail:
+	umul	%g2,%g2,%o4
+	st	%o4,[%o0]
+	deccc	%o2
+	rd	%y,%o5
+	bz	.L_bn_sqr_words_return
+	st	%o5,[%o0+4]
+
+	ld	[%o1+4],%g2
+	umul	%g2,%g2,%o4
+	st	%o4,[%o0+8]
+	deccc	%o2
+	rd	%y,%o5
+	nop
+	bz	.L_bn_sqr_words_return
+	st	%o5,[%o0+12]
+
+	ld	[%o1+8],%g2
+	umul	%g2,%g2,%o4
+	st	%o4,[%o0+16]
+	rd	%y,%o5
+	st	%o5,[%o0+20]
+	retl
+	clr	%o0
+
+.type	bn_sqr_words,#function
+.size	bn_sqr_words,(.-bn_sqr_words)
+
+.align	32
+
+.global bn_div_words
+/*
+ * BN_ULONG bn_div_words(h,l,d)
+ * BN_ULONG h,l,d;
+ */
+bn_div_words:
+	wr	%o0,%y
+	udiv	%o1,%o2,%o0
+	retl
+	nop
+
+.type	bn_div_words,#function
+.size	bn_div_words,(.-bn_div_words)
+
+.align	32
+
+.global bn_add_words
+/*
+ * BN_ULONG bn_add_words(rp,ap,bp,n)
+ * BN_ULONG *rp,*ap,*bp;
+ * int n;
+ */
+bn_add_words:
+	cmp	%o3,0
+	bg,a	.L_bn_add_words_proceed
+	ld	[%o1],%o4
+	retl
+	clr	%o0
+
+.L_bn_add_words_proceed:
+	andcc	%o3,-4,%g0
+	bz	.L_bn_add_words_tail
+	clr	%g1
+	ba	.L_bn_add_words_warn_loop
+	addcc	%g0,0,%g0	! clear carry flag
+
+.L_bn_add_words_loop:
+	ld	[%o1],%o4
+.L_bn_add_words_warn_loop:
+	ld	[%o2],%o5
+	ld	[%o1+4],%g3
+	ld	[%o2+4],%g4
+	dec	4,%o3
+	addxcc	%o5,%o4,%o5
+	st	%o5,[%o0]
+
+	ld	[%o1+8],%o4
+	ld	[%o2+8],%o5
+	inc	16,%o1
+	addxcc	%g3,%g4,%g3
+	st	%g3,[%o0+4]
+	
+	ld	[%o1-4],%g3
+	ld	[%o2+12],%g4
+	inc	16,%o2
+	addxcc	%o5,%o4,%o5
+	st	%o5,[%o0+8]
+
+	inc	16,%o0
+	addxcc	%g3,%g4,%g3
+	st	%g3,[%o0-4]
+	addx	%g0,0,%g1
+	andcc	%o3,-4,%g0
+	bnz,a	.L_bn_add_words_loop
+	addcc	%g1,-1,%g0
+
+	tst	%o3
+	bnz,a	.L_bn_add_words_tail
+	ld	[%o1],%o4
+.L_bn_add_words_return:
+	retl
+	mov	%g1,%o0
+
+.L_bn_add_words_tail:
+	addcc	%g1,-1,%g0
+	ld	[%o2],%o5
+	addxcc	%o5,%o4,%o5
+	addx	%g0,0,%g1
+	deccc	%o3
+	bz	.L_bn_add_words_return
+	st	%o5,[%o0]
+
+	ld	[%o1+4],%o4
+	addcc	%g1,-1,%g0
+	ld	[%o2+4],%o5
+	addxcc	%o5,%o4,%o5
+	addx	%g0,0,%g1
+	deccc	%o3
+	bz	.L_bn_add_words_return
+	st	%o5,[%o0+4]
+
+	ld	[%o1+8],%o4
+	addcc	%g1,-1,%g0
+	ld	[%o2+8],%o5
+	addxcc	%o5,%o4,%o5
+	st	%o5,[%o0+8]
+	retl
+	addx	%g0,0,%o0
+
+.type	bn_add_words,#function
+.size	bn_add_words,(.-bn_add_words)
+
+.align	32
+
+.global bn_sub_words
+/*
+ * BN_ULONG bn_sub_words(rp,ap,bp,n)
+ * BN_ULONG *rp,*ap,*bp;
+ * int n;
+ */
+bn_sub_words:
+	cmp	%o3,0
+	bg,a	.L_bn_sub_words_proceed
+	ld	[%o1],%o4
+	retl
+	clr	%o0
+
+.L_bn_sub_words_proceed:
+	andcc	%o3,-4,%g0
+	bz	.L_bn_sub_words_tail
+	clr	%g1
+	ba	.L_bn_sub_words_warm_loop
+	addcc	%g0,0,%g0	! clear carry flag
+
+.L_bn_sub_words_loop:
+	ld	[%o1],%o4
+.L_bn_sub_words_warm_loop:
+	ld	[%o2],%o5
+	ld	[%o1+4],%g3
+	ld	[%o2+4],%g4
+	dec	4,%o3
+	subxcc	%o4,%o5,%o5
+	st	%o5,[%o0]
+
+	ld	[%o1+8],%o4
+	ld	[%o2+8],%o5
+	inc	16,%o1
+	subxcc	%g3,%g4,%g4
+	st	%g4,[%o0+4]
+	
+	ld	[%o1-4],%g3
+	ld	[%o2+12],%g4
+	inc	16,%o2
+	subxcc	%o4,%o5,%o5
+	st	%o5,[%o0+8]
+
+	inc	16,%o0
+	subxcc	%g3,%g4,%g4
+	st	%g4,[%o0-4]
+	addx	%g0,0,%g1
+	andcc	%o3,-4,%g0
+	bnz,a	.L_bn_sub_words_loop
+	addcc	%g1,-1,%g0
+
+	tst	%o3
+	nop
+	bnz,a	.L_bn_sub_words_tail
+	ld	[%o1],%o4
+.L_bn_sub_words_return:
+	retl
+	mov	%g1,%o0
+
+.L_bn_sub_words_tail:
+	addcc	%g1,-1,%g0
+	ld	[%o2],%o5
+	subxcc	%o4,%o5,%o5
+	addx	%g0,0,%g1
+	deccc	%o3
+	bz	.L_bn_sub_words_return
+	st	%o5,[%o0]
+	nop
+
+	ld	[%o1+4],%o4
+	addcc	%g1,-1,%g0
+	ld	[%o2+4],%o5
+	subxcc	%o4,%o5,%o5
+	addx	%g0,0,%g1
+	deccc	%o3
+	bz	.L_bn_sub_words_return
+	st	%o5,[%o0+4]
+
+	ld	[%o1+8],%o4
+	addcc	%g1,-1,%g0
+	ld	[%o2+8],%o5
+	subxcc	%o4,%o5,%o5
+	st	%o5,[%o0+8]
+	retl
+	addx	%g0,0,%o0
+
+.type	bn_sub_words,#function
+.size	bn_sub_words,(.-bn_sub_words)
+
+#define FRAME_SIZE	-96
+
+/*
+ * Here is register usage map for *all* routines below.
+ */
+#define t_1	%o0
+#define	t_2	%o1
+#define c_1	%o2
+#define c_2	%o3
+#define c_3	%o4
+
+#define ap(I)	[%i1+4*I]
+#define bp(I)	[%i2+4*I]
+#define rp(I)	[%i0+4*I]
+
+#define	a_0	%l0
+#define	a_1	%l1
+#define	a_2	%l2
+#define	a_3	%l3
+#define	a_4	%l4
+#define	a_5	%l5
+#define	a_6	%l6
+#define	a_7	%l7
+
+#define	b_0	%i3
+#define	b_1	%i4
+#define	b_2	%i5
+#define	b_3	%o5
+#define	b_4	%g1
+#define	b_5	%g2
+#define	b_6	%g3
+#define	b_7	%g4
+
+.align	32
+.global bn_mul_comba8
+/*
+ * void bn_mul_comba8(r,a,b)
+ * BN_ULONG *r,*a,*b;
+ */
+bn_mul_comba8:
+	save	%sp,FRAME_SIZE,%sp
+	ld	ap(0),a_0
+	ld	bp(0),b_0
+	umul	a_0,b_0,c_1	!=!mul_add_c(a[0],b[0],c1,c2,c3);
+	ld	bp(1),b_1
+	rd	%y,c_2
+	st	c_1,rp(0)	!r[0]=c1;
+
+	umul	a_0,b_1,t_1	!=!mul_add_c(a[0],b[1],c2,c3,c1);
+	ld	ap(1),a_1
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	%g0,t_2,c_3	!=
+	addx	%g0,%g0,c_1
+	ld	ap(2),a_2
+	umul	a_1,b_0,t_1	!mul_add_c(a[1],b[0],c2,c3,c1);
+	addcc	c_2,t_1,c_2	!=
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	st	c_2,rp(1)	!r[1]=c2;
+	addx	c_1,%g0,c_1	!=
+
+	umul	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	%g0,%g0,c_2
+	ld	bp(2),b_2
+	umul	a_1,b_1,t_1	!mul_add_c(a[1],b[1],c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	ld	bp(3),b_3
+	addx	c_2,%g0,c_2	!=
+	umul	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	st	c_3,rp(2)	!r[2]=c3;
+
+	umul	a_0,b_3,t_1	!mul_add_c(a[0],b[3],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	%g0,%g0,c_3
+	umul	a_1,b_2,t_1	!=!mul_add_c(a[1],b[2],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	ld	ap(3),a_3
+	umul	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2		!=
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	ld	ap(4),a_4
+	umul	a_3,b_0,t_1	!mul_add_c(a[3],b[0],c1,c2,c3);!=
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	st	c_1,rp(3)	!r[3]=c1;
+
+	umul	a_4,b_0,t_1	!mul_add_c(a[4],b[0],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	umul	a_3,b_1,t_1	!mul_add_c(a[3],b[1],c2,c3,c1);
+	addcc	c_2,t_1,c_2	!=
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	umul	a_2,b_2,t_1	!=!mul_add_c(a[2],b[2],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	ld	bp(4),b_4
+	umul	a_1,b_3,t_1	!mul_add_c(a[1],b[3],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	ld	bp(5),b_5
+	umul	a_0,b_4,t_1	!=!mul_add_c(a[0],b[4],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	st	c_2,rp(4)	!r[4]=c2;
+
+	umul	a_0,b_5,t_1	!mul_add_c(a[0],b[5],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2
+	umul	a_1,b_4,t_1	!mul_add_c(a[1],b[4],c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_2,b_3,t_1	!=!mul_add_c(a[2],b[3],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	umul	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	ld	ap(5),a_5
+	umul	a_4,b_1,t_1	!mul_add_c(a[4],b[1],c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	ld	ap(6),a_6
+	addx	c_2,%g0,c_2	!=
+	umul	a_5,b_0,t_1	!mul_add_c(a[5],b[0],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	st	c_3,rp(5)	!r[5]=c3;
+
+	umul	a_6,b_0,t_1	!mul_add_c(a[6],b[0],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	%g0,%g0,c_3
+	umul	a_5,b_1,t_1	!=!mul_add_c(a[5],b[1],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	umul	a_4,b_2,t_1	!mul_add_c(a[4],b[2],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	umul	a_3,b_3,t_1	!mul_add_c(a[3],b[3],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2		!=
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	umul	a_2,b_4,t_1	!mul_add_c(a[2],b[4],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	ld	bp(6),b_6
+	addx	c_3,%g0,c_3	!=
+	umul	a_1,b_5,t_1	!mul_add_c(a[1],b[5],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	ld	bp(7),b_7
+	umul	a_0,b_6,t_1	!mul_add_c(a[0],b[6],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	st	c_1,rp(6)	!r[6]=c1;
+	addx	c_3,%g0,c_3	!=
+
+	umul	a_0,b_7,t_1	!mul_add_c(a[0],b[7],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	%g0,%g0,c_1
+	umul	a_1,b_6,t_1	!mul_add_c(a[1],b[6],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	umul	a_2,b_5,t_1	!mul_add_c(a[2],b[5],c2,c3,c1);
+	addcc	c_2,t_1,c_2	!=
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	umul	a_3,b_4,t_1	!=!mul_add_c(a[3],b[4],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	umul	a_4,b_3,t_1	!mul_add_c(a[4],b[3],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_5,b_2,t_1	!mul_add_c(a[5],b[2],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	ld	ap(7),a_7
+	umul	a_6,b_1,t_1	!=!mul_add_c(a[6],b[1],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	umul	a_7,b_0,t_1	!mul_add_c(a[7],b[0],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	st	c_2,rp(7)	!r[7]=c2;
+
+	umul	a_7,b_1,t_1	!mul_add_c(a[7],b[1],c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2
+	umul	a_6,b_2,t_1	!=!mul_add_c(a[6],b[2],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	umul	a_5,b_3,t_1	!mul_add_c(a[5],b[3],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	umul	a_4,b_4,t_1	!mul_add_c(a[4],b[4],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_3,b_5,t_1	!mul_add_c(a[3],b[5],c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_2,b_6,t_1	!=!mul_add_c(a[2],b[6],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	umul	a_1,b_7,t_1	!mul_add_c(a[1],b[7],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!
+	addx	c_2,%g0,c_2
+	st	c_3,rp(8)	!r[8]=c3;
+
+	umul	a_2,b_7,t_1	!mul_add_c(a[2],b[7],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	%g0,%g0,c_3
+	umul	a_3,b_6,t_1	!=!mul_add_c(a[3],b[6],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	umul	a_4,b_5,t_1	!mul_add_c(a[4],b[5],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	umul	a_5,b_4,t_1	!mul_add_c(a[5],b[4],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2		!=
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	umul	a_6,b_3,t_1	!mul_add_c(a[6],b[3],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	umul	a_7,b_2,t_1	!=!mul_add_c(a[7],b[2],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	st	c_1,rp(9)	!r[9]=c1;
+
+	umul	a_7,b_3,t_1	!mul_add_c(a[7],b[3],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	umul	a_6,b_4,t_1	!mul_add_c(a[6],b[4],c2,c3,c1);
+	addcc	c_2,t_1,c_2	!=
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	umul	a_5,b_5,t_1	!=!mul_add_c(a[5],b[5],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	umul	a_4,b_6,t_1	!mul_add_c(a[4],b[6],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_3,b_7,t_1	!mul_add_c(a[3],b[7],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	st	c_2,rp(10)	!r[10]=c2;
+
+	umul	a_4,b_7,t_1	!=!mul_add_c(a[4],b[7],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2	!=
+	umul	a_5,b_6,t_1	!mul_add_c(a[5],b[6],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	umul	a_6,b_5,t_1	!mul_add_c(a[6],b[5],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_7,b_4,t_1	!mul_add_c(a[7],b[4],c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	st	c_3,rp(11)	!r[11]=c3;
+	addx	c_2,%g0,c_2	!=
+
+	umul	a_7,b_5,t_1	!mul_add_c(a[7],b[5],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	%g0,%g0,c_3
+	umul	a_6,b_6,t_1	!mul_add_c(a[6],b[6],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2		!=
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	umul	a_5,b_7,t_1	!mul_add_c(a[5],b[7],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	st	c_1,rp(12)	!r[12]=c1;
+	addx	c_3,%g0,c_3	!=
+
+	umul	a_6,b_7,t_1	!mul_add_c(a[6],b[7],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	%g0,%g0,c_1
+	umul	a_7,b_6,t_1	!mul_add_c(a[7],b[6],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	st	c_2,rp(13)	!r[13]=c2;
+
+	umul	a_7,b_7,t_1	!=!mul_add_c(a[7],b[7],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	nop			!=
+	st	c_3,rp(14)	!r[14]=c3;
+	st	c_1,rp(15)	!r[15]=c1;
+
+	ret
+	restore	%g0,%g0,%o0
+
+.type	bn_mul_comba8,#function
+.size	bn_mul_comba8,(.-bn_mul_comba8)
+
+.align	32
+
+.global bn_mul_comba4
+/*
+ * void bn_mul_comba4(r,a,b)
+ * BN_ULONG *r,*a,*b;
+ */
+bn_mul_comba4:
+	save	%sp,FRAME_SIZE,%sp
+	ld	ap(0),a_0
+	ld	bp(0),b_0
+	umul	a_0,b_0,c_1	!=!mul_add_c(a[0],b[0],c1,c2,c3);
+	ld	bp(1),b_1
+	rd	%y,c_2
+	st	c_1,rp(0)	!r[0]=c1;
+
+	umul	a_0,b_1,t_1	!=!mul_add_c(a[0],b[1],c2,c3,c1);
+	ld	ap(1),a_1
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	%g0,t_2,c_3
+	addx	%g0,%g0,c_1
+	ld	ap(2),a_2
+	umul	a_1,b_0,t_1	!=!mul_add_c(a[1],b[0],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	st	c_2,rp(1)	!r[1]=c2;
+
+	umul	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2
+	ld	bp(2),b_2
+	umul	a_1,b_1,t_1	!=!mul_add_c(a[1],b[1],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	ld	bp(3),b_3
+	umul	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	st	c_3,rp(2)	!r[2]=c3;
+
+	umul	a_0,b_3,t_1	!=!mul_add_c(a[0],b[3],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	%g0,%g0,c_3	!=
+	umul	a_1,b_2,t_1	!mul_add_c(a[1],b[2],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	ld	ap(3),a_3
+	umul	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	umul	a_3,b_0,t_1	!=!mul_add_c(a[3],b[0],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	st	c_1,rp(3)	!r[3]=c1;
+
+	umul	a_3,b_1,t_1	!mul_add_c(a[3],b[1],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	umul	a_2,b_2,t_1	!mul_add_c(a[2],b[2],c2,c3,c1);
+	addcc	c_2,t_1,c_2	!=
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	umul	a_1,b_3,t_1	!=!mul_add_c(a[1],b[3],c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	st	c_2,rp(4)	!r[4]=c2;
+
+	umul	a_2,b_3,t_1	!mul_add_c(a[2],b[3],c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2
+	umul	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	st	c_3,rp(5)	!r[5]=c3;
+	addx	c_2,%g0,c_2	!=
+
+	umul	a_3,b_3,t_1	!mul_add_c(a[3],b[3],c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	st	c_1,rp(6)	!r[6]=c1;
+	st	c_2,rp(7)	!r[7]=c2;
+	
+	ret
+	restore	%g0,%g0,%o0
+
+.type	bn_mul_comba4,#function
+.size	bn_mul_comba4,(.-bn_mul_comba4)
+
+.align	32
+
+.global bn_sqr_comba8
+bn_sqr_comba8:
+	save	%sp,FRAME_SIZE,%sp
+	ld	ap(0),a_0
+	ld	ap(1),a_1
+	umul	a_0,a_0,c_1	!=!sqr_add_c(a,0,c1,c2,c3);
+	rd	%y,c_2
+	st	c_1,rp(0)	!r[0]=c1;
+
+	ld	ap(2),a_2
+	umul	a_0,a_1,t_1	!=!sqr_add_c2(a,1,0,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	%g0,t_2,c_3
+	addx	%g0,%g0,c_1	!=
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3
+	st	c_2,rp(1)	!r[1]=c2;
+	addx	c_1,%g0,c_1	!=
+
+	umul	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	%g0,%g0,c_2
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	ld	ap(3),a_3
+	umul	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	st	c_3,rp(2)	!r[2]=c3;
+
+	umul	a_0,a_3,t_1	!=!sqr_add_c2(a,3,0,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	%g0,%g0,c_3	!=
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	ld	ap(4),a_4
+	addx	c_3,%g0,c_3	!=
+	umul	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	st	c_1,rp(3)	!r[3]=c1;
+
+	umul	a_4,a_0,t_1	!sqr_add_c2(a,4,0,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	ld	ap(5),a_5
+	umul	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
+	addcc	c_2,t_1,c_2	!=
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	st	c_2,rp(4)	!r[4]=c2;
+	addx	c_1,%g0,c_1	!=
+
+	umul	a_0,a_5,t_1	!sqr_add_c2(a,5,0,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	%g0,%g0,c_2
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	umul	a_1,a_4,t_1	!sqr_add_c2(a,4,1,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	ld	ap(6),a_6
+	umul	a_2,a_3,t_1	!sqr_add_c2(a,3,2,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	st	c_3,rp(5)	!r[5]=c3;
+
+	umul	a_6,a_0,t_1	!sqr_add_c2(a,6,0,c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	%g0,%g0,c_3
+	addcc	c_1,t_1,c_1	!=
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	umul	a_5,a_1,t_1	!sqr_add_c2(a,5,1,c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	addcc	c_1,t_1,c_1	!=
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	umul	a_4,a_2,t_1	!sqr_add_c2(a,4,2,c1,c2,c3);
+	addcc	c_1,t_1,c_1	!=
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	addcc	c_1,t_1,c_1	!=
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3
+	ld	ap(7),a_7
+	umul	a_3,a_3,t_1	!=!sqr_add_c(a,3,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	st	c_1,rp(6)	!r[6]=c1;
+
+	umul	a_0,a_7,t_1	!sqr_add_c2(a,7,0,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_1,a_6,t_1	!sqr_add_c2(a,6,1,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_2,a_5,t_1	!sqr_add_c2(a,5,2,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_3,a_4,t_1	!sqr_add_c2(a,4,3,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	st	c_2,rp(7)	!r[7]=c2;
+
+	umul	a_7,a_1,t_1	!sqr_add_c2(a,7,1,c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2
+	addcc	c_3,t_1,c_3	!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_6,a_2,t_1	!sqr_add_c2(a,6,2,c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	addcc	c_3,t_1,c_3	!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_5,a_3,t_1	!sqr_add_c2(a,5,3,c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	addcc	c_3,t_1,c_3	!=
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_4,a_4,t_1	!sqr_add_c(a,4,c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	st	c_3,rp(8)	!r[8]=c3;
+	addx	c_2,%g0,c_2	!=
+
+	umul	a_2,a_7,t_1	!sqr_add_c2(a,7,2,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	%g0,%g0,c_3
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	umul	a_3,a_6,t_1	!sqr_add_c2(a,6,3,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	umul	a_4,a_5,t_1	!sqr_add_c2(a,5,4,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	st	c_1,rp(9)	!r[9]=c1;
+
+	umul	a_7,a_3,t_1	!sqr_add_c2(a,7,3,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_6,a_4,t_1	!sqr_add_c2(a,6,4,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_5,a_5,t_1	!sqr_add_c(a,5,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	st	c_2,rp(10)	!r[10]=c2;
+
+	umul	a_4,a_7,t_1	!=!sqr_add_c2(a,7,4,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2	!=
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2
+	umul	a_5,a_6,t_1	!=!sqr_add_c2(a,6,5,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	c_2,%g0,c_2	!=
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1
+	st	c_3,rp(11)	!r[11]=c3;
+	addx	c_2,%g0,c_2	!=
+
+	umul	a_7,a_5,t_1	!sqr_add_c2(a,7,5,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	%g0,%g0,c_3
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	umul	a_6,a_6,t_1	!sqr_add_c(a,6,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	st	c_1,rp(12)	!r[12]=c1;
+
+	umul	a_6,a_7,t_1	!sqr_add_c2(a,7,6,c2,c3,c1);
+	addcc	c_2,t_1,c_2	!=
+	rd	%y,t_2
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	addcc	c_2,t_1,c_2	!=
+	addxcc	c_3,t_2,c_3
+	st	c_2,rp(13)	!r[13]=c2;
+	addx	c_1,%g0,c_1	!=
+
+	umul	a_7,a_7,t_1	!sqr_add_c(a,7,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1	!=
+	st	c_3,rp(14)	!r[14]=c3;
+	st	c_1,rp(15)	!r[15]=c1;
+
+	ret
+	restore	%g0,%g0,%o0
+
+.type	bn_sqr_comba8,#function
+.size	bn_sqr_comba8,(.-bn_sqr_comba8)
+
+.align	32
+
+.global bn_sqr_comba4
+/*
+ * void bn_sqr_comba4(r,a)
+ * BN_ULONG *r,*a;
+ */
+bn_sqr_comba4:
+	save	%sp,FRAME_SIZE,%sp
+	ld	ap(0),a_0
+	umul	a_0,a_0,c_1	!sqr_add_c(a,0,c1,c2,c3);
+	ld	ap(1),a_1	!=
+	rd	%y,c_2
+	st	c_1,rp(0)	!r[0]=c1;
+
+	ld	ap(2),a_2
+	umul	a_0,a_1,t_1	!=!sqr_add_c2(a,1,0,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2
+	addxcc	%g0,t_2,c_3
+	addx	%g0,%g0,c_1	!=
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1	!=
+	st	c_2,rp(1)	!r[1]=c2;
+
+	umul	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2		!=
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1	!=
+	addx	c_2,%g0,c_2
+	ld	ap(3),a_3
+	umul	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
+	addcc	c_3,t_1,c_3	!=
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	st	c_3,rp(2)	!r[2]=c3;
+	addx	c_2,%g0,c_2	!=
+
+	umul	a_0,a_3,t_1	!sqr_add_c2(a,3,0,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	%g0,%g0,c_3
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	umul	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	addx	c_3,%g0,c_3
+	addcc	c_1,t_1,c_1
+	addxcc	c_2,t_2,c_2
+	addx	c_3,%g0,c_3	!=
+	st	c_1,rp(3)	!r[3]=c1;
+
+	umul	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	%g0,%g0,c_1
+	addcc	c_2,t_1,c_2
+	addxcc	c_3,t_2,c_3	!=
+	addx	c_1,%g0,c_1
+	umul	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
+	addcc	c_2,t_1,c_2
+	rd	%y,t_2		!=
+	addxcc	c_3,t_2,c_3
+	addx	c_1,%g0,c_1
+	st	c_2,rp(4)	!r[4]=c2;
+
+	umul	a_2,a_3,t_1	!=!sqr_add_c2(a,3,2,c3,c1,c2);
+	addcc	c_3,t_1,c_3
+	rd	%y,t_2
+	addxcc	c_1,t_2,c_1
+	addx	%g0,%g0,c_2	!=
+	addcc	c_3,t_1,c_3
+	addxcc	c_1,t_2,c_1
+	st	c_3,rp(5)	!r[5]=c3;
+	addx	c_2,%g0,c_2	!=
+
+	umul	a_3,a_3,t_1	!sqr_add_c(a,3,c1,c2,c3);
+	addcc	c_1,t_1,c_1
+	rd	%y,t_2
+	addxcc	c_2,t_2,c_2	!=
+	st	c_1,rp(6)	!r[6]=c1;
+	st	c_2,rp(7)	!r[7]=c2;
+	
+	ret
+	restore	%g0,%g0,%o0
+
+.type	bn_sqr_comba4,#function
+.size	bn_sqr_comba4,(.-bn_sqr_comba4)
+
+.align	32
diff --git a/app/openssl/crypto/bn/asm/sparcv8plus.S b/app/openssl/crypto/bn/asm/sparcv8plus.S
new file mode 100644
index 00000000..63de1860
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/sparcv8plus.S
@@ -0,0 +1,1558 @@
+.ident	"sparcv8plus.s, Version 1.4"
+.ident	"SPARC v9 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+
+/*
+ * ====================================================================
+ * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+ * project.
+ *
+ * Rights for redistribution and usage in source and binary forms are
+ * granted according to the OpenSSL license. Warranty of any kind is
+ * disclaimed.
+ * ====================================================================
+ */
+
+/*
+ * This is my modest contributon to OpenSSL project (see
+ * http://www.openssl.org/ for more information about it) and is
+ * a drop-in UltraSPARC ISA replacement for crypto/bn/bn_asm.c
+ * module. For updates see http://fy.chalmers.se/~appro/hpe/.
+ *
+ * Questions-n-answers.
+ *
+ * Q. How to compile?
+ * A. With SC4.x/SC5.x:
+ *
+ *	cc -xarch=v8plus -c bn_asm.sparc.v8plus.S -o bn_asm.o
+ *
+ *    and with gcc:
+ *
+ *	gcc -mcpu=ultrasparc -c bn_asm.sparc.v8plus.S -o bn_asm.o
+ *
+ *    or if above fails (it does if you have gas installed):
+ *
+ *	gcc -E bn_asm.sparc.v8plus.S | as -xarch=v8plus /dev/fd/0 -o bn_asm.o
+ *
+ *    Quick-n-dirty way to fuse the module into the library.
+ *    Provided that the library is already configured and built
+ *    (in 0.9.2 case with no-asm option):
+ *
+ *	# cd crypto/bn
+ *	# cp /some/place/bn_asm.sparc.v8plus.S .
+ *	# cc -xarch=v8plus -c bn_asm.sparc.v8plus.S -o bn_asm.o
+ *	# make
+ *	# cd ../..
+ *	# make; make test
+ *
+ *    Quick-n-dirty way to get rid of it:
+ *
+ *	# cd crypto/bn
+ *	# touch bn_asm.c
+ *	# make
+ *	# cd ../..
+ *	# make; make test
+ *
+ * Q. V8plus achitecture? What kind of beast is that?
+ * A. Well, it's rather a programming model than an architecture...
+ *    It's actually v9-compliant, i.e. *any* UltraSPARC, CPU under
+ *    special conditions, namely when kernel doesn't preserve upper
+ *    32 bits of otherwise 64-bit registers during a context switch.
+ *
+ * Q. Why just UltraSPARC? What about SuperSPARC?
+ * A. Original release did target UltraSPARC only. Now SuperSPARC
+ *    version is provided along. Both version share bn_*comba[48]
+ *    implementations (see comment later in code for explanation).
+ *    But what's so special about this UltraSPARC implementation?
+ *    Why didn't I let compiler do the job? Trouble is that most of
+ *    available compilers (well, SC5.0 is the only exception) don't
+ *    attempt to take advantage of UltraSPARC's 64-bitness under
+ *    32-bit kernels even though it's perfectly possible (see next
+ *    question).
+ *
+ * Q. 64-bit registers under 32-bit kernels? Didn't you just say it
+ *    doesn't work?
+ * A. You can't adress *all* registers as 64-bit wide:-( The catch is
+ *    that you actually may rely upon %o0-%o5 and %g1-%g4 being fully
+ *    preserved if you're in a leaf function, i.e. such never calling
+ *    any other functions. All functions in this module are leaf and
+ *    10 registers is a handful. And as a matter of fact none-"comba"
+ *    routines don't require even that much and I could even afford to
+ *    not allocate own stack frame for 'em:-)
+ *
+ * Q. What about 64-bit kernels?
+ * A. What about 'em? Just kidding:-) Pure 64-bit version is currently
+ *    under evaluation and development...
+ *
+ * Q. What about shared libraries?
+ * A. What about 'em? Kidding again:-) Code does *not* contain any
+ *    code position dependencies and it's safe to include it into
+ *    shared library as is.
+ *
+ * Q. How much faster does it go?
+ * A. Do you have a good benchmark? In either case below is what I
+ *    experience with crypto/bn/expspeed.c test program:
+ *
+ *	v8plus module on U10/300MHz against bn_asm.c compiled with:
+ *
+ *	cc-5.0 -xarch=v8plus -xO5 -xdepend	+7-12%
+ *	cc-4.2 -xarch=v8plus -xO5 -xdepend	+25-35%
+ *	egcs-1.1.2 -mcpu=ultrasparc -O3		+35-45%
+ *
+ *	v8 module on SS10/60MHz against bn_asm.c compiled with:
+ *
+ *	cc-5.0 -xarch=v8 -xO5 -xdepend		+7-10%
+ *	cc-4.2 -xarch=v8 -xO5 -xdepend		+10%
+ *	egcs-1.1.2 -mv8 -O3			+35-45%
+ *
+ *    As you can see it's damn hard to beat the new Sun C compiler
+ *    and it's in first place GNU C users who will appreciate this
+ *    assembler implementation:-)	
+ */
+
+/*
+ * Revision history.
+ *
+ * 1.0	- initial release;
+ * 1.1	- new loop unrolling model(*);
+ *	- some more fine tuning;
+ * 1.2	- made gas friendly;
+ *	- updates to documentation concerning v9;
+ *	- new performance comparison matrix;
+ * 1.3	- fixed problem with /usr/ccs/lib/cpp;
+ * 1.4	- native V9 bn_*_comba[48] implementation (15% more efficient)
+ *	  resulting in slight overall performance kick;
+ *	- some retunes;
+ *	- support for GNU as added;
+ *
+ * (*)	Originally unrolled loop looked like this:
+ *	    for (;;) {
+ *		op(p+0); if (--n==0) break;
+ *		op(p+1); if (--n==0) break;
+ *		op(p+2); if (--n==0) break;
+ *		op(p+3); if (--n==0) break;
+ *		p+=4;
+ *	    }
+ *	I unroll according to following:
+ *	    while (n&~3) {
+ *		op(p+0); op(p+1); op(p+2); op(p+3);
+ *		p+=4; n=-4;
+ *	    }
+ *	    if (n) {
+ *		op(p+0); if (--n==0) return;
+ *		op(p+2); if (--n==0) return;
+ *		op(p+3); return;
+ *	    }
+ */
+
+#if defined(__SUNPRO_C) && defined(__sparcv9)
+  /* They've said -xarch=v9 at command line */
+  .register	%g2,#scratch
+  .register	%g3,#scratch
+# define	FRAME_SIZE	-192
+#elif defined(__GNUC__) && defined(__arch64__)
+  /* They've said -m64 at command line */
+  .register	%g2,#scratch
+  .register	%g3,#scratch
+# define	FRAME_SIZE	-192
+#else 
+# define	FRAME_SIZE	-96
+#endif 
+/*
+ * GNU assembler can't stand stuw:-(
+ */
+#define stuw st
+
+.section	".text",#alloc,#execinstr
+.file		"bn_asm.sparc.v8plus.S"
+
+.align	32
+
+.global bn_mul_add_words
+/*
+ * BN_ULONG bn_mul_add_words(rp,ap,num,w)
+ * BN_ULONG *rp,*ap;
+ * int num;
+ * BN_ULONG w;
+ */
+bn_mul_add_words:
+	sra	%o2,%g0,%o2	! signx %o2
+	brgz,a	%o2,.L_bn_mul_add_words_proceed
+	lduw	[%o1],%g2
+	retl
+	clr	%o0
+	nop
+	nop
+	nop
+
+.L_bn_mul_add_words_proceed:
+	srl	%o3,%g0,%o3	! clruw	%o3
+	andcc	%o2,-4,%g0
+	bz,pn	%icc,.L_bn_mul_add_words_tail
+	clr	%o5
+
+.L_bn_mul_add_words_loop:	! wow! 32 aligned!
+	lduw	[%o0],%g1
+	lduw	[%o1+4],%g3
+	mulx	%o3,%g2,%g2
+	add	%g1,%o5,%o4
+	nop
+	add	%o4,%g2,%o4
+	stuw	%o4,[%o0]
+	srlx	%o4,32,%o5
+
+	lduw	[%o0+4],%g1
+	lduw	[%o1+8],%g2
+	mulx	%o3,%g3,%g3
+	add	%g1,%o5,%o4
+	dec	4,%o2
+	add	%o4,%g3,%o4
+	stuw	%o4,[%o0+4]
+	srlx	%o4,32,%o5
+
+	lduw	[%o0+8],%g1
+	lduw	[%o1+12],%g3
+	mulx	%o3,%g2,%g2
+	add	%g1,%o5,%o4
+	inc	16,%o1
+	add	%o4,%g2,%o4
+	stuw	%o4,[%o0+8]
+	srlx	%o4,32,%o5
+
+	lduw	[%o0+12],%g1
+	mulx	%o3,%g3,%g3
+	add	%g1,%o5,%o4
+	inc	16,%o0
+	add	%o4,%g3,%o4
+	andcc	%o2,-4,%g0
+	stuw	%o4,[%o0-4]
+	srlx	%o4,32,%o5
+	bnz,a,pt	%icc,.L_bn_mul_add_words_loop
+	lduw	[%o1],%g2
+
+	brnz,a,pn	%o2,.L_bn_mul_add_words_tail
+	lduw	[%o1],%g2
+.L_bn_mul_add_words_return:
+	retl
+	mov	%o5,%o0
+
+.L_bn_mul_add_words_tail:
+	lduw	[%o0],%g1
+	mulx	%o3,%g2,%g2
+	add	%g1,%o5,%o4
+	dec	%o2
+	add	%o4,%g2,%o4
+	srlx	%o4,32,%o5
+	brz,pt	%o2,.L_bn_mul_add_words_return
+	stuw	%o4,[%o0]
+
+	lduw	[%o1+4],%g2
+	lduw	[%o0+4],%g1
+	mulx	%o3,%g2,%g2
+	add	%g1,%o5,%o4
+	dec	%o2
+	add	%o4,%g2,%o4
+	srlx	%o4,32,%o5
+	brz,pt	%o2,.L_bn_mul_add_words_return
+	stuw	%o4,[%o0+4]
+
+	lduw	[%o1+8],%g2
+	lduw	[%o0+8],%g1
+	mulx	%o3,%g2,%g2
+	add	%g1,%o5,%o4
+	add	%o4,%g2,%o4
+	stuw	%o4,[%o0+8]
+	retl
+	srlx	%o4,32,%o0
+
+.type	bn_mul_add_words,#function
+.size	bn_mul_add_words,(.-bn_mul_add_words)
+
+.align	32
+
+.global bn_mul_words
+/*
+ * BN_ULONG bn_mul_words(rp,ap,num,w)
+ * BN_ULONG *rp,*ap;
+ * int num;
+ * BN_ULONG w;
+ */
+bn_mul_words:
+	sra	%o2,%g0,%o2	! signx %o2
+	brgz,a	%o2,.L_bn_mul_words_proceeed
+	lduw	[%o1],%g2
+	retl
+	clr	%o0
+	nop
+	nop
+	nop
+
+.L_bn_mul_words_proceeed:
+	srl	%o3,%g0,%o3	! clruw	%o3
+	andcc	%o2,-4,%g0
+	bz,pn	%icc,.L_bn_mul_words_tail
+	clr	%o5
+
+.L_bn_mul_words_loop:		! wow! 32 aligned!
+	lduw	[%o1+4],%g3
+	mulx	%o3,%g2,%g2
+	add	%g2,%o5,%o4
+	nop
+	stuw	%o4,[%o0]
+	srlx	%o4,32,%o5
+
+	lduw	[%o1+8],%g2
+	mulx	%o3,%g3,%g3
+	add	%g3,%o5,%o4
+	dec	4,%o2
+	stuw	%o4,[%o0+4]
+	srlx	%o4,32,%o5
+
+	lduw	[%o1+12],%g3
+	mulx	%o3,%g2,%g2
+	add	%g2,%o5,%o4
+	inc	16,%o1
+	stuw	%o4,[%o0+8]
+	srlx	%o4,32,%o5
+
+	mulx	%o3,%g3,%g3
+	add	%g3,%o5,%o4
+	inc	16,%o0
+	stuw	%o4,[%o0-4]
+	srlx	%o4,32,%o5
+	andcc	%o2,-4,%g0
+	bnz,a,pt	%icc,.L_bn_mul_words_loop
+	lduw	[%o1],%g2
+	nop
+	nop
+
+	brnz,a,pn	%o2,.L_bn_mul_words_tail
+	lduw	[%o1],%g2
+.L_bn_mul_words_return:
+	retl
+	mov	%o5,%o0
+
+.L_bn_mul_words_tail:
+	mulx	%o3,%g2,%g2
+	add	%g2,%o5,%o4
+	dec	%o2
+	srlx	%o4,32,%o5
+	brz,pt	%o2,.L_bn_mul_words_return
+	stuw	%o4,[%o0]
+
+	lduw	[%o1+4],%g2
+	mulx	%o3,%g2,%g2
+	add	%g2,%o5,%o4
+	dec	%o2
+	srlx	%o4,32,%o5
+	brz,pt	%o2,.L_bn_mul_words_return
+	stuw	%o4,[%o0+4]
+
+	lduw	[%o1+8],%g2
+	mulx	%o3,%g2,%g2
+	add	%g2,%o5,%o4
+	stuw	%o4,[%o0+8]
+	retl
+	srlx	%o4,32,%o0
+
+.type	bn_mul_words,#function
+.size	bn_mul_words,(.-bn_mul_words)
+
+.align  32
+.global	bn_sqr_words
+/*
+ * void bn_sqr_words(r,a,n)
+ * BN_ULONG *r,*a;
+ * int n;
+ */
+bn_sqr_words:
+	sra	%o2,%g0,%o2	! signx %o2
+	brgz,a	%o2,.L_bn_sqr_words_proceeed
+	lduw	[%o1],%g2
+	retl
+	clr	%o0
+	nop
+	nop
+	nop
+
+.L_bn_sqr_words_proceeed:
+	andcc	%o2,-4,%g0
+	nop
+	bz,pn	%icc,.L_bn_sqr_words_tail
+	nop
+
+.L_bn_sqr_words_loop:		! wow! 32 aligned!
+	lduw	[%o1+4],%g3
+	mulx	%g2,%g2,%o4
+	stuw	%o4,[%o0]
+	srlx	%o4,32,%o5
+	stuw	%o5,[%o0+4]
+	nop
+
+	lduw	[%o1+8],%g2
+	mulx	%g3,%g3,%o4
+	dec	4,%o2
+	stuw	%o4,[%o0+8]
+	srlx	%o4,32,%o5
+	stuw	%o5,[%o0+12]
+
+	lduw	[%o1+12],%g3
+	mulx	%g2,%g2,%o4
+	srlx	%o4,32,%o5
+	stuw	%o4,[%o0+16]
+	inc	16,%o1
+	stuw	%o5,[%o0+20]
+
+	mulx	%g3,%g3,%o4
+	inc	32,%o0
+	stuw	%o4,[%o0-8]
+	srlx	%o4,32,%o5
+	andcc	%o2,-4,%g2
+	stuw	%o5,[%o0-4]
+	bnz,a,pt	%icc,.L_bn_sqr_words_loop
+	lduw	[%o1],%g2
+	nop
+
+	brnz,a,pn	%o2,.L_bn_sqr_words_tail
+	lduw	[%o1],%g2
+.L_bn_sqr_words_return:
+	retl
+	clr	%o0
+
+.L_bn_sqr_words_tail:
+	mulx	%g2,%g2,%o4
+	dec	%o2
+	stuw	%o4,[%o0]
+	srlx	%o4,32,%o5
+	brz,pt	%o2,.L_bn_sqr_words_return
+	stuw	%o5,[%o0+4]
+
+	lduw	[%o1+4],%g2
+	mulx	%g2,%g2,%o4
+	dec	%o2
+	stuw	%o4,[%o0+8]
+	srlx	%o4,32,%o5
+	brz,pt	%o2,.L_bn_sqr_words_return
+	stuw	%o5,[%o0+12]
+
+	lduw	[%o1+8],%g2
+	mulx	%g2,%g2,%o4
+	srlx	%o4,32,%o5
+	stuw	%o4,[%o0+16]
+	stuw	%o5,[%o0+20]
+	retl
+	clr	%o0
+
+.type	bn_sqr_words,#function
+.size	bn_sqr_words,(.-bn_sqr_words)
+
+.align	32
+.global bn_div_words
+/*
+ * BN_ULONG bn_div_words(h,l,d)
+ * BN_ULONG h,l,d;
+ */
+bn_div_words:
+	sllx	%o0,32,%o0
+	or	%o0,%o1,%o0
+	udivx	%o0,%o2,%o0
+	retl
+	srl	%o0,%g0,%o0	! clruw	%o0
+
+.type	bn_div_words,#function
+.size	bn_div_words,(.-bn_div_words)
+
+.align	32
+
+.global bn_add_words
+/*
+ * BN_ULONG bn_add_words(rp,ap,bp,n)
+ * BN_ULONG *rp,*ap,*bp;
+ * int n;
+ */
+bn_add_words:
+	sra	%o3,%g0,%o3	! signx %o3
+	brgz,a	%o3,.L_bn_add_words_proceed
+	lduw	[%o1],%o4
+	retl
+	clr	%o0
+
+.L_bn_add_words_proceed:
+	andcc	%o3,-4,%g0
+	bz,pn	%icc,.L_bn_add_words_tail
+	addcc	%g0,0,%g0	! clear carry flag
+
+.L_bn_add_words_loop:		! wow! 32 aligned!
+	dec	4,%o3
+	lduw	[%o2],%o5
+	lduw	[%o1+4],%g1
+	lduw	[%o2+4],%g2
+	lduw	[%o1+8],%g3
+	lduw	[%o2+8],%g4
+	addccc	%o5,%o4,%o5
+	stuw	%o5,[%o0]
+
+	lduw	[%o1+12],%o4
+	lduw	[%o2+12],%o5
+	inc	16,%o1
+	addccc	%g1,%g2,%g1
+	stuw	%g1,[%o0+4]
+	
+	inc	16,%o2
+	addccc	%g3,%g4,%g3
+	stuw	%g3,[%o0+8]
+
+	inc	16,%o0
+	addccc	%o5,%o4,%o5
+	stuw	%o5,[%o0-4]
+	and	%o3,-4,%g1
+	brnz,a,pt	%g1,.L_bn_add_words_loop
+	lduw	[%o1],%o4
+
+	brnz,a,pn	%o3,.L_bn_add_words_tail
+	lduw	[%o1],%o4
+.L_bn_add_words_return:
+	clr	%o0
+	retl
+	movcs	%icc,1,%o0
+	nop
+
+.L_bn_add_words_tail:
+	lduw	[%o2],%o5
+	dec	%o3
+	addccc	%o5,%o4,%o5
+	brz,pt	%o3,.L_bn_add_words_return
+	stuw	%o5,[%o0]
+
+	lduw	[%o1+4],%o4
+	lduw	[%o2+4],%o5
+	dec	%o3
+	addccc	%o5,%o4,%o5
+	brz,pt	%o3,.L_bn_add_words_return
+	stuw	%o5,[%o0+4]
+
+	lduw	[%o1+8],%o4
+	lduw	[%o2+8],%o5
+	addccc	%o5,%o4,%o5
+	stuw	%o5,[%o0+8]
+	clr	%o0
+	retl
+	movcs	%icc,1,%o0
+
+.type	bn_add_words,#function
+.size	bn_add_words,(.-bn_add_words)
+
+.global bn_sub_words
+/*
+ * BN_ULONG bn_sub_words(rp,ap,bp,n)
+ * BN_ULONG *rp,*ap,*bp;
+ * int n;
+ */
+bn_sub_words:
+	sra	%o3,%g0,%o3	! signx %o3
+	brgz,a	%o3,.L_bn_sub_words_proceed
+	lduw	[%o1],%o4
+	retl
+	clr	%o0
+
+.L_bn_sub_words_proceed:
+	andcc	%o3,-4,%g0
+	bz,pn	%icc,.L_bn_sub_words_tail
+	addcc	%g0,0,%g0	! clear carry flag
+
+.L_bn_sub_words_loop:		! wow! 32 aligned!
+	dec	4,%o3
+	lduw	[%o2],%o5
+	lduw	[%o1+4],%g1
+	lduw	[%o2+4],%g2
+	lduw	[%o1+8],%g3
+	lduw	[%o2+8],%g4
+	subccc	%o4,%o5,%o5
+	stuw	%o5,[%o0]
+
+	lduw	[%o1+12],%o4
+	lduw	[%o2+12],%o5
+	inc	16,%o1
+	subccc	%g1,%g2,%g2
+	stuw	%g2,[%o0+4]
+
+	inc	16,%o2
+	subccc	%g3,%g4,%g4
+	stuw	%g4,[%o0+8]
+
+	inc	16,%o0
+	subccc	%o4,%o5,%o5
+	stuw	%o5,[%o0-4]
+	and	%o3,-4,%g1
+	brnz,a,pt	%g1,.L_bn_sub_words_loop
+	lduw	[%o1],%o4
+
+	brnz,a,pn	%o3,.L_bn_sub_words_tail
+	lduw	[%o1],%o4
+.L_bn_sub_words_return:
+	clr	%o0
+	retl
+	movcs	%icc,1,%o0
+	nop
+
+.L_bn_sub_words_tail:		! wow! 32 aligned!
+	lduw	[%o2],%o5
+	dec	%o3
+	subccc	%o4,%o5,%o5
+	brz,pt	%o3,.L_bn_sub_words_return
+	stuw	%o5,[%o0]
+
+	lduw	[%o1+4],%o4
+	lduw	[%o2+4],%o5
+	dec	%o3
+	subccc	%o4,%o5,%o5
+	brz,pt	%o3,.L_bn_sub_words_return
+	stuw	%o5,[%o0+4]
+
+	lduw	[%o1+8],%o4
+	lduw	[%o2+8],%o5
+	subccc	%o4,%o5,%o5
+	stuw	%o5,[%o0+8]
+	clr	%o0
+	retl
+	movcs	%icc,1,%o0
+
+.type	bn_sub_words,#function
+.size	bn_sub_words,(.-bn_sub_words)
+
+/*
+ * Code below depends on the fact that upper parts of the %l0-%l7
+ * and %i0-%i7 are zeroed by kernel after context switch. In
+ * previous versions this comment stated that "the trouble is that
+ * it's not feasible to implement the mumbo-jumbo in less V9
+ * instructions:-(" which apparently isn't true thanks to
+ * 'bcs,a %xcc,.+8; inc %rd' pair. But the performance improvement
+ * results not from the shorter code, but from elimination of
+ * multicycle none-pairable 'rd %y,%rd' instructions.
+ *
+ *							Andy.
+ */
+
+/*
+ * Here is register usage map for *all* routines below.
+ */
+#define t_1	%o0
+#define	t_2	%o1
+#define c_12	%o2
+#define c_3	%o3
+
+#define ap(I)	[%i1+4*I]
+#define bp(I)	[%i2+4*I]
+#define rp(I)	[%i0+4*I]
+
+#define	a_0	%l0
+#define	a_1	%l1
+#define	a_2	%l2
+#define	a_3	%l3
+#define	a_4	%l4
+#define	a_5	%l5
+#define	a_6	%l6
+#define	a_7	%l7
+
+#define	b_0	%i3
+#define	b_1	%i4
+#define	b_2	%i5
+#define	b_3	%o4
+#define	b_4	%o5
+#define	b_5	%o7
+#define	b_6	%g1
+#define	b_7	%g4
+
+.align	32
+.global bn_mul_comba8
+/*
+ * void bn_mul_comba8(r,a,b)
+ * BN_ULONG *r,*a,*b;
+ */
+bn_mul_comba8:
+	save	%sp,FRAME_SIZE,%sp
+	mov	1,t_2
+	lduw	ap(0),a_0
+	sllx	t_2,32,t_2
+	lduw	bp(0),b_0	!=
+	lduw	bp(1),b_1
+	mulx	a_0,b_0,t_1	!mul_add_c(a[0],b[0],c1,c2,c3);
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(0)	!=!r[0]=c1;
+
+	lduw	ap(1),a_1
+	mulx	a_0,b_1,t_1	!mul_add_c(a[0],b[1],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3		!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(2),a_2
+	mulx	a_1,b_0,t_1	!=!mul_add_c(a[1],b[0],c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12	!=
+	stuw	t_1,rp(1)	!r[1]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
+	addcc	c_12,t_1,c_12	!=
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	bp(2),b_2	!=
+	mulx	a_1,b_1,t_1	!mul_add_c(a[1],b[1],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	lduw	bp(3),b_3
+	mulx	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(2)	!r[2]=c3;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_0,b_3,t_1	!mul_add_c(a[0],b[3],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_1,b_2,t_1	!=!mul_add_c(a[1],b[2],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	lduw	ap(3),a_3
+	mulx	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
+	addcc	c_12,t_1,c_12	!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(4),a_4
+	mulx	a_3,b_0,t_1	!=!mul_add_c(a[3],b[0],c1,c2,c3);!=
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12	!=
+	stuw	t_1,rp(3)	!r[3]=c1;
+	or	c_12,c_3,c_12
+
+	mulx	a_4,b_0,t_1	!mul_add_c(a[4],b[0],c2,c3,c1);
+	addcc	c_12,t_1,c_12	!=
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_3,b_1,t_1	!=!mul_add_c(a[3],b[1],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_2,b_2,t_1	!=!mul_add_c(a[2],b[2],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	bp(4),b_4	!=
+	mulx	a_1,b_3,t_1	!mul_add_c(a[1],b[3],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	lduw	bp(5),b_5
+	mulx	a_0,b_4,t_1	!mul_add_c(a[0],b[4],c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(4)	!r[4]=c2;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_0,b_5,t_1	!mul_add_c(a[0],b[5],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_1,b_4,t_1	!mul_add_c(a[1],b[4],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_2,b_3,t_1	!mul_add_c(a[2],b[3],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	lduw	ap(5),a_5
+	mulx	a_4,b_1,t_1	!mul_add_c(a[4],b[1],c3,c1,c2);
+	addcc	c_12,t_1,c_12	!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(6),a_6
+	mulx	a_5,b_0,t_1	!=!mul_add_c(a[5],b[0],c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12	!=
+	stuw	t_1,rp(5)	!r[5]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_6,b_0,t_1	!mul_add_c(a[6],b[0],c1,c2,c3);
+	addcc	c_12,t_1,c_12	!=
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_5,b_1,t_1	!=!mul_add_c(a[5],b[1],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_4,b_2,t_1	!=!mul_add_c(a[4],b[2],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_3,b_3,t_1	!=!mul_add_c(a[3],b[3],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_2,b_4,t_1	!=!mul_add_c(a[2],b[4],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	bp(6),b_6	!=
+	mulx	a_1,b_5,t_1	!mul_add_c(a[1],b[5],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	lduw	bp(7),b_7
+	mulx	a_0,b_6,t_1	!mul_add_c(a[0],b[6],c1,c2,c3);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(6)	!r[6]=c1;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_0,b_7,t_1	!mul_add_c(a[0],b[7],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_1,b_6,t_1	!mul_add_c(a[1],b[6],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_2,b_5,t_1	!mul_add_c(a[2],b[5],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_3,b_4,t_1	!mul_add_c(a[3],b[4],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_4,b_3,t_1	!mul_add_c(a[4],b[3],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_5,b_2,t_1	!mul_add_c(a[5],b[2],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	lduw	ap(7),a_7
+	mulx	a_6,b_1,t_1	!=!mul_add_c(a[6],b[1],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_7,b_0,t_1	!=!mul_add_c(a[7],b[0],c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12	!=
+	stuw	t_1,rp(7)	!r[7]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_7,b_1,t_1	!=!mul_add_c(a[7],b[1],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	mulx	a_6,b_2,t_1	!mul_add_c(a[6],b[2],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	mulx	a_5,b_3,t_1	!mul_add_c(a[5],b[3],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	mulx	a_4,b_4,t_1	!mul_add_c(a[4],b[4],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	mulx	a_3,b_5,t_1	!mul_add_c(a[3],b[5],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	mulx	a_2,b_6,t_1	!mul_add_c(a[2],b[6],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	mulx	a_1,b_7,t_1	!mul_add_c(a[1],b[7],c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(8)	!r[8]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,b_7,t_1	!=!mul_add_c(a[2],b[7],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	mulx	a_3,b_6,t_1	!mul_add_c(a[3],b[6],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_4,b_5,t_1	!mul_add_c(a[4],b[5],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_5,b_4,t_1	!mul_add_c(a[5],b[4],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_6,b_3,t_1	!mul_add_c(a[6],b[3],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_7,b_2,t_1	!mul_add_c(a[7],b[2],c1,c2,c3);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(9)	!r[9]=c1;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_7,b_3,t_1	!mul_add_c(a[7],b[3],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_6,b_4,t_1	!mul_add_c(a[6],b[4],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_5,b_5,t_1	!mul_add_c(a[5],b[5],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_4,b_6,t_1	!mul_add_c(a[4],b[6],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_3,b_7,t_1	!mul_add_c(a[3],b[7],c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(10)	!r[10]=c2;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_4,b_7,t_1	!mul_add_c(a[4],b[7],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_5,b_6,t_1	!mul_add_c(a[5],b[6],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_6,b_5,t_1	!mul_add_c(a[6],b[5],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_7,b_4,t_1	!mul_add_c(a[7],b[4],c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(11)	!r[11]=c3;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_7,b_5,t_1	!mul_add_c(a[7],b[5],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_6,b_6,t_1	!mul_add_c(a[6],b[6],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_5,b_7,t_1	!mul_add_c(a[5],b[7],c1,c2,c3);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(12)	!r[12]=c1;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_6,b_7,t_1	!mul_add_c(a[6],b[7],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_7,b_6,t_1	!mul_add_c(a[7],b[6],c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	st	t_1,rp(13)	!r[13]=c2;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_7,b_7,t_1	!mul_add_c(a[7],b[7],c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	srlx	t_1,32,c_12	!=
+	stuw	t_1,rp(14)	!r[14]=c3;
+	stuw	c_12,rp(15)	!r[15]=c1;
+
+	ret
+	restore	%g0,%g0,%o0	!=
+
+.type	bn_mul_comba8,#function
+.size	bn_mul_comba8,(.-bn_mul_comba8)
+
+.align	32
+
+.global bn_mul_comba4
+/*
+ * void bn_mul_comba4(r,a,b)
+ * BN_ULONG *r,*a,*b;
+ */
+bn_mul_comba4:
+	save	%sp,FRAME_SIZE,%sp
+	lduw	ap(0),a_0
+	mov	1,t_2
+	lduw	bp(0),b_0
+	sllx	t_2,32,t_2	!=
+	lduw	bp(1),b_1
+	mulx	a_0,b_0,t_1	!mul_add_c(a[0],b[0],c1,c2,c3);
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(0)	!=!r[0]=c1;
+
+	lduw	ap(1),a_1
+	mulx	a_0,b_1,t_1	!mul_add_c(a[0],b[1],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3		!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(2),a_2
+	mulx	a_1,b_0,t_1	!=!mul_add_c(a[1],b[0],c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12	!=
+	stuw	t_1,rp(1)	!r[1]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
+	addcc	c_12,t_1,c_12	!=
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	bp(2),b_2	!=
+	mulx	a_1,b_1,t_1	!mul_add_c(a[1],b[1],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3	!=
+	lduw	bp(3),b_3
+	mulx	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(2)	!r[2]=c3;
+	or	c_12,c_3,c_12	!=
+
+	mulx	a_0,b_3,t_1	!mul_add_c(a[0],b[3],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	mulx	a_1,b_2,t_1	!mul_add_c(a[1],b[2],c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8	!=
+	add	c_3,t_2,c_3
+	lduw	ap(3),a_3
+	mulx	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
+	addcc	c_12,t_1,c_12	!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_3,b_0,t_1	!mul_add_c(a[3],b[0],c1,c2,c3);!=
+	addcc	c_12,t_1,t_1	!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(3)	!=!r[3]=c1;
+	or	c_12,c_3,c_12
+
+	mulx	a_3,b_1,t_1	!mul_add_c(a[3],b[1],c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3		!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_2,b_2,t_1	!mul_add_c(a[2],b[2],c2,c3,c1);
+	addcc	c_12,t_1,c_12	!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_1,b_3,t_1	!mul_add_c(a[1],b[3],c2,c3,c1);
+	addcc	c_12,t_1,t_1	!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(4)	!=!r[4]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,b_3,t_1	!mul_add_c(a[2],b[3],c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3		!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
+	addcc	c_12,t_1,t_1	!=
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(5)	!=!r[5]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_3,b_3,t_1	!mul_add_c(a[3],b[3],c1,c2,c3);
+	addcc	c_12,t_1,t_1
+	srlx	t_1,32,c_12	!=
+	stuw	t_1,rp(6)	!r[6]=c1;
+	stuw	c_12,rp(7)	!r[7]=c2;
+	
+	ret
+	restore	%g0,%g0,%o0
+
+.type	bn_mul_comba4,#function
+.size	bn_mul_comba4,(.-bn_mul_comba4)
+
+.align	32
+
+.global bn_sqr_comba8
+bn_sqr_comba8:
+	save	%sp,FRAME_SIZE,%sp
+	mov	1,t_2
+	lduw	ap(0),a_0
+	sllx	t_2,32,t_2
+	lduw	ap(1),a_1
+	mulx	a_0,a_0,t_1	!sqr_add_c(a,0,c1,c2,c3);
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(0)	!r[0]=c1;
+
+	lduw	ap(2),a_2
+	mulx	a_0,a_1,t_1	!=!sqr_add_c2(a,1,0,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(1)	!r[1]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(3),a_3
+	mulx	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(2)	!r[2]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_0,a_3,t_1	!sqr_add_c2(a,3,0,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(4),a_4
+	mulx	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	st	t_1,rp(3)	!r[3]=c1;
+	or	c_12,c_3,c_12
+
+	mulx	a_4,a_0,t_1	!sqr_add_c2(a,4,0,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(5),a_5
+	mulx	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(4)	!r[4]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_0,a_5,t_1	!sqr_add_c2(a,5,0,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_1,a_4,t_1	!sqr_add_c2(a,4,1,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(6),a_6
+	mulx	a_2,a_3,t_1	!sqr_add_c2(a,3,2,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(5)	!r[5]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_6,a_0,t_1	!sqr_add_c2(a,6,0,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_5,a_1,t_1	!sqr_add_c2(a,5,1,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_4,a_2,t_1	!sqr_add_c2(a,4,2,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(7),a_7
+	mulx	a_3,a_3,t_1	!=!sqr_add_c(a,3,c1,c2,c3);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(6)	!r[6]=c1;
+	or	c_12,c_3,c_12
+
+	mulx	a_0,a_7,t_1	!sqr_add_c2(a,7,0,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_1,a_6,t_1	!sqr_add_c2(a,6,1,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_2,a_5,t_1	!sqr_add_c2(a,5,2,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_3,a_4,t_1	!sqr_add_c2(a,4,3,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(7)	!r[7]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_7,a_1,t_1	!sqr_add_c2(a,7,1,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_6,a_2,t_1	!sqr_add_c2(a,6,2,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_5,a_3,t_1	!sqr_add_c2(a,5,3,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_4,a_4,t_1	!sqr_add_c(a,4,c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(8)	!r[8]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,a_7,t_1	!sqr_add_c2(a,7,2,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_3,a_6,t_1	!sqr_add_c2(a,6,3,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_4,a_5,t_1	!sqr_add_c2(a,5,4,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(9)	!r[9]=c1;
+	or	c_12,c_3,c_12
+
+	mulx	a_7,a_3,t_1	!sqr_add_c2(a,7,3,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_6,a_4,t_1	!sqr_add_c2(a,6,4,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_5,a_5,t_1	!sqr_add_c(a,5,c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(10)	!r[10]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_4,a_7,t_1	!sqr_add_c2(a,7,4,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_5,a_6,t_1	!sqr_add_c2(a,6,5,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(11)	!r[11]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_7,a_5,t_1	!sqr_add_c2(a,7,5,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_6,a_6,t_1	!sqr_add_c(a,6,c1,c2,c3);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(12)	!r[12]=c1;
+	or	c_12,c_3,c_12
+
+	mulx	a_6,a_7,t_1	!sqr_add_c2(a,7,6,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(13)	!r[13]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_7,a_7,t_1	!sqr_add_c(a,7,c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(14)	!r[14]=c3;
+	stuw	c_12,rp(15)	!r[15]=c1;
+
+	ret
+	restore	%g0,%g0,%o0
+
+.type	bn_sqr_comba8,#function
+.size	bn_sqr_comba8,(.-bn_sqr_comba8)
+
+.align	32
+
+.global bn_sqr_comba4
+/*
+ * void bn_sqr_comba4(r,a)
+ * BN_ULONG *r,*a;
+ */
+bn_sqr_comba4:
+	save	%sp,FRAME_SIZE,%sp
+	mov	1,t_2
+	lduw	ap(0),a_0
+	sllx	t_2,32,t_2
+	lduw	ap(1),a_1
+	mulx	a_0,a_0,t_1	!sqr_add_c(a,0,c1,c2,c3);
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(0)	!r[0]=c1;
+
+	lduw	ap(2),a_2
+	mulx	a_0,a_1,t_1	!sqr_add_c2(a,1,0,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(1)	!r[1]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	lduw	ap(3),a_3
+	mulx	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(2)	!r[2]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_0,a_3,t_1	!sqr_add_c2(a,3,0,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(3)	!r[3]=c1;
+	or	c_12,c_3,c_12
+
+	mulx	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,c_12
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	mulx	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(4)	!r[4]=c2;
+	or	c_12,c_3,c_12
+
+	mulx	a_2,a_3,t_1	!sqr_add_c2(a,3,2,c3,c1,c2);
+	addcc	c_12,t_1,c_12
+	clr	c_3
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	addcc	c_12,t_1,t_1
+	bcs,a	%xcc,.+8
+	add	c_3,t_2,c_3
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(5)	!r[5]=c3;
+	or	c_12,c_3,c_12
+
+	mulx	a_3,a_3,t_1	!sqr_add_c(a,3,c1,c2,c3);
+	addcc	c_12,t_1,t_1
+	srlx	t_1,32,c_12
+	stuw	t_1,rp(6)	!r[6]=c1;
+	stuw	c_12,rp(7)	!r[7]=c2;
+	
+	ret
+	restore	%g0,%g0,%o0
+
+.type	bn_sqr_comba4,#function
+.size	bn_sqr_comba4,(.-bn_sqr_comba4)
+
+.align	32
diff --git a/app/openssl/crypto/bn/asm/sparcv9-mont.pl b/app/openssl/crypto/bn/asm/sparcv9-mont.pl
new file mode 100644
index 00000000..b8fb1e8a
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/sparcv9-mont.pl
@@ -0,0 +1,606 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# December 2005
+#
+# Pure SPARCv9/8+ and IALU-only bn_mul_mont implementation. The reasons
+# for undertaken effort are multiple. First of all, UltraSPARC is not
+# the whole SPARCv9 universe and other VIS-free implementations deserve
+# optimized code as much. Secondly, newly introduced UltraSPARC T1,
+# a.k.a. Niagara, has shared FPU and concurrent FPU-intensive pathes,
+# such as sparcv9a-mont, will simply sink it. Yes, T1 is equipped with
+# several integrated RSA/DSA accelerator circuits accessible through
+# kernel driver [only(*)], but having decent user-land software
+# implementation is important too. Finally, reasons like desire to
+# experiment with dedicated squaring procedure. Yes, this module
+# implements one, because it was easiest to draft it in SPARCv9
+# instructions...
+
+# (*)	Engine accessing the driver in question is on my TODO list.
+#	For reference, acceleator is estimated to give 6 to 10 times
+#	improvement on single-threaded RSA sign. It should be noted
+#	that 6-10x improvement coefficient does not actually mean
+#	something extraordinary in terms of absolute [single-threaded]
+#	performance, as SPARCv9 instruction set is by all means least
+#	suitable for high performance crypto among other 64 bit
+#	platforms. 6-10x factor simply places T1 in same performance
+#	domain as say AMD64 and IA-64. Improvement of RSA verify don't
+#	appear impressive at all, but it's the sign operation which is
+#	far more critical/interesting.
+
+# You might notice that inner loops are modulo-scheduled:-) This has
+# essentially negligible impact on UltraSPARC performance, it's
+# Fujitsu SPARC64 V users who should notice and hopefully appreciate
+# the advantage... Currently this module surpasses sparcv9a-mont.pl
+# by ~20% on UltraSPARC-III and later cores, but recall that sparcv9a
+# module still have hidden potential [see TODO list there], which is
+# estimated to be larger than 20%...
+
+# int bn_mul_mont(
+$rp="%i0";	# BN_ULONG *rp,
+$ap="%i1";	# const BN_ULONG *ap,
+$bp="%i2";	# const BN_ULONG *bp,
+$np="%i3";	# const BN_ULONG *np,
+$n0="%i4";	# const BN_ULONG *n0,
+$num="%i5";	# int num);
+
+$bits=32;
+for (@ARGV)	{ $bits=64 if (/\-m64/ || /\-xarch\=v9/); }
+if ($bits==64)	{ $bias=2047; $frame=192; }
+else		{ $bias=0;    $frame=128; }
+
+$car0="%o0";
+$car1="%o1";
+$car2="%o2";	# 1 bit
+$acc0="%o3";
+$acc1="%o4";
+$mask="%g1";	# 32 bits, what a waste...
+$tmp0="%g4";
+$tmp1="%g5";
+
+$i="%l0";
+$j="%l1";
+$mul0="%l2";
+$mul1="%l3";
+$tp="%l4";
+$apj="%l5";
+$npj="%l6";
+$tpj="%l7";
+
+$fname="bn_mul_mont_int";
+
+$code=<<___;
+.section	".text",#alloc,#execinstr
+
+.global	$fname
+.align	32
+$fname:
+	cmp	%o5,4			! 128 bits minimum
+	bge,pt	%icc,.Lenter
+	sethi	%hi(0xffffffff),$mask
+	retl
+	clr	%o0
+.align	32
+.Lenter:
+	save	%sp,-$frame,%sp
+	sll	$num,2,$num		! num*=4
+	or	$mask,%lo(0xffffffff),$mask
+	ld	[$n0],$n0
+	cmp	$ap,$bp
+	and	$num,$mask,$num
+	ld	[$bp],$mul0		! bp[0]
+	nop
+
+	add	%sp,$bias,%o7		! real top of stack
+	ld	[$ap],$car0		! ap[0] ! redundant in squaring context
+	sub	%o7,$num,%o7
+	ld	[$ap+4],$apj		! ap[1]
+	and	%o7,-1024,%o7
+	ld	[$np],$car1		! np[0]
+	sub	%o7,$bias,%sp		! alloca
+	ld	[$np+4],$npj		! np[1]
+	be,pt	`$bits==32?"%icc":"%xcc"`,.Lbn_sqr_mont
+	mov	12,$j
+
+	mulx	$car0,$mul0,$car0	! ap[0]*bp[0]
+	mulx	$apj,$mul0,$tmp0	!prologue! ap[1]*bp[0]
+	and	$car0,$mask,$acc0
+	add	%sp,$bias+$frame,$tp
+	ld	[$ap+8],$apj		!prologue!
+
+	mulx	$n0,$acc0,$mul1		! "t[0]"*n0
+	and	$mul1,$mask,$mul1
+
+	mulx	$car1,$mul1,$car1	! np[0]*"t[0]"*n0
+	mulx	$npj,$mul1,$acc1	!prologue! np[1]*"t[0]"*n0
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	ld	[$np+8],$npj		!prologue!
+	srlx	$car1,32,$car1
+	mov	$tmp0,$acc0		!prologue!
+
+.L1st:
+	mulx	$apj,$mul0,$tmp0
+	mulx	$npj,$mul1,$tmp1
+	add	$acc0,$car0,$car0
+	ld	[$ap+$j],$apj		! ap[j]
+	and	$car0,$mask,$acc0
+	add	$acc1,$car1,$car1
+	ld	[$np+$j],$npj		! np[j]
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	add	$j,4,$j			! j++
+	mov	$tmp0,$acc0
+	st	$car1,[$tp]
+	cmp	$j,$num
+	mov	$tmp1,$acc1
+	srlx	$car1,32,$car1
+	bl	%icc,.L1st
+	add	$tp,4,$tp		! tp++
+!.L1st
+
+	mulx	$apj,$mul0,$tmp0	!epilogue!
+	mulx	$npj,$mul1,$tmp1
+	add	$acc0,$car0,$car0
+	and	$car0,$mask,$acc0
+	add	$acc1,$car1,$car1
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp]
+	srlx	$car1,32,$car1
+
+	add	$tmp0,$car0,$car0
+	and	$car0,$mask,$acc0
+	add	$tmp1,$car1,$car1
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp+4]
+	srlx	$car1,32,$car1
+
+	add	$car0,$car1,$car1
+	st	$car1,[$tp+8]
+	srlx	$car1,32,$car2
+
+	mov	4,$i			! i++
+	ld	[$bp+4],$mul0		! bp[1]
+.Louter:
+	add	%sp,$bias+$frame,$tp
+	ld	[$ap],$car0		! ap[0]
+	ld	[$ap+4],$apj		! ap[1]
+	ld	[$np],$car1		! np[0]
+	ld	[$np+4],$npj		! np[1]
+	ld	[$tp],$tmp1		! tp[0]
+	ld	[$tp+4],$tpj		! tp[1]
+	mov	12,$j
+
+	mulx	$car0,$mul0,$car0
+	mulx	$apj,$mul0,$tmp0	!prologue!
+	add	$tmp1,$car0,$car0
+	ld	[$ap+8],$apj		!prologue!
+	and	$car0,$mask,$acc0
+
+	mulx	$n0,$acc0,$mul1
+	and	$mul1,$mask,$mul1
+
+	mulx	$car1,$mul1,$car1
+	mulx	$npj,$mul1,$acc1	!prologue!
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	ld	[$np+8],$npj		!prologue!
+	srlx	$car1,32,$car1
+	mov	$tmp0,$acc0		!prologue!
+
+.Linner:
+	mulx	$apj,$mul0,$tmp0
+	mulx	$npj,$mul1,$tmp1
+	add	$tpj,$car0,$car0
+	ld	[$ap+$j],$apj		! ap[j]
+	add	$acc0,$car0,$car0
+	add	$acc1,$car1,$car1
+	ld	[$np+$j],$npj		! np[j]
+	and	$car0,$mask,$acc0
+	ld	[$tp+8],$tpj		! tp[j]
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	add	$j,4,$j			! j++
+	mov	$tmp0,$acc0
+	st	$car1,[$tp]		! tp[j-1]
+	srlx	$car1,32,$car1
+	mov	$tmp1,$acc1
+	cmp	$j,$num
+	bl	%icc,.Linner
+	add	$tp,4,$tp		! tp++
+!.Linner
+
+	mulx	$apj,$mul0,$tmp0	!epilogue!
+	mulx	$npj,$mul1,$tmp1
+	add	$tpj,$car0,$car0
+	add	$acc0,$car0,$car0
+	ld	[$tp+8],$tpj		! tp[j]
+	and	$car0,$mask,$acc0
+	add	$acc1,$car1,$car1
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp]		! tp[j-1]
+	srlx	$car1,32,$car1
+
+	add	$tpj,$car0,$car0
+	add	$tmp0,$car0,$car0
+	and	$car0,$mask,$acc0
+	add	$tmp1,$car1,$car1
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp+4]		! tp[j-1]
+	srlx	$car0,32,$car0
+	add	$i,4,$i			! i++
+	srlx	$car1,32,$car1
+
+	add	$car0,$car1,$car1
+	cmp	$i,$num
+	add	$car2,$car1,$car1
+	st	$car1,[$tp+8]
+
+	srlx	$car1,32,$car2
+	bl,a	%icc,.Louter
+	ld	[$bp+$i],$mul0		! bp[i]
+!.Louter
+
+	add	$tp,12,$tp
+
+.Ltail:
+	add	$np,$num,$np
+	add	$rp,$num,$rp
+	mov	$tp,$ap
+	sub	%g0,$num,%o7		! k=-num
+	ba	.Lsub
+	subcc	%g0,%g0,%g0		! clear %icc.c
+.align	16
+.Lsub:
+	ld	[$tp+%o7],%o0
+	ld	[$np+%o7],%o1
+	subccc	%o0,%o1,%o1		! tp[j]-np[j]
+	add	$rp,%o7,$i
+	add	%o7,4,%o7
+	brnz	%o7,.Lsub
+	st	%o1,[$i]
+	subc	$car2,0,$car2		! handle upmost overflow bit
+	and	$tp,$car2,$ap
+	andn	$rp,$car2,$np
+	or	$ap,$np,$ap
+	sub	%g0,$num,%o7
+
+.Lcopy:
+	ld	[$ap+%o7],%o0		! copy or in-place refresh
+	st	%g0,[$tp+%o7]		! zap tp
+	st	%o0,[$rp+%o7]
+	add	%o7,4,%o7
+	brnz	%o7,.Lcopy
+	nop
+	mov	1,%i0
+	ret
+	restore
+___
+
+########
+######## .Lbn_sqr_mont gives up to 20% *overall* improvement over
+######## code without following dedicated squaring procedure.
+########
+$sbit="%i2";		# re-use $bp!
+
+$code.=<<___;
+.align	32
+.Lbn_sqr_mont:
+	mulx	$mul0,$mul0,$car0		! ap[0]*ap[0]
+	mulx	$apj,$mul0,$tmp0		!prologue!
+	and	$car0,$mask,$acc0
+	add	%sp,$bias+$frame,$tp
+	ld	[$ap+8],$apj			!prologue!
+
+	mulx	$n0,$acc0,$mul1			! "t[0]"*n0
+	srlx	$car0,32,$car0
+	and	$mul1,$mask,$mul1
+
+	mulx	$car1,$mul1,$car1		! np[0]*"t[0]"*n0
+	mulx	$npj,$mul1,$acc1		!prologue!
+	and	$car0,1,$sbit
+	ld	[$np+8],$npj			!prologue!
+	srlx	$car0,1,$car0
+	add	$acc0,$car1,$car1
+	srlx	$car1,32,$car1
+	mov	$tmp0,$acc0			!prologue!
+
+.Lsqr_1st:
+	mulx	$apj,$mul0,$tmp0
+	mulx	$npj,$mul1,$tmp1
+	add	$acc0,$car0,$car0		! ap[j]*a0+c0
+	add	$acc1,$car1,$car1
+	ld	[$ap+$j],$apj			! ap[j]
+	and	$car0,$mask,$acc0
+	ld	[$np+$j],$npj			! np[j]
+	srlx	$car0,32,$car0
+	add	$acc0,$acc0,$acc0
+	or	$sbit,$acc0,$acc0
+	mov	$tmp1,$acc1
+	srlx	$acc0,32,$sbit
+	add	$j,4,$j				! j++
+	and	$acc0,$mask,$acc0
+	cmp	$j,$num
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp]
+	mov	$tmp0,$acc0
+	srlx	$car1,32,$car1
+	bl	%icc,.Lsqr_1st
+	add	$tp,4,$tp			! tp++
+!.Lsqr_1st
+
+	mulx	$apj,$mul0,$tmp0		! epilogue
+	mulx	$npj,$mul1,$tmp1
+	add	$acc0,$car0,$car0		! ap[j]*a0+c0
+	add	$acc1,$car1,$car1
+	and	$car0,$mask,$acc0
+	srlx	$car0,32,$car0
+	add	$acc0,$acc0,$acc0
+	or	$sbit,$acc0,$acc0
+	srlx	$acc0,32,$sbit
+	and	$acc0,$mask,$acc0
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp]
+	srlx	$car1,32,$car1
+
+	add	$tmp0,$car0,$car0		! ap[j]*a0+c0
+	add	$tmp1,$car1,$car1
+	and	$car0,$mask,$acc0
+	srlx	$car0,32,$car0
+	add	$acc0,$acc0,$acc0
+	or	$sbit,$acc0,$acc0
+	srlx	$acc0,32,$sbit
+	and	$acc0,$mask,$acc0
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp+4]
+	srlx	$car1,32,$car1
+
+	add	$car0,$car0,$car0
+	or	$sbit,$car0,$car0
+	add	$car0,$car1,$car1
+	st	$car1,[$tp+8]
+	srlx	$car1,32,$car2
+
+	ld	[%sp+$bias+$frame],$tmp0	! tp[0]
+	ld	[%sp+$bias+$frame+4],$tmp1	! tp[1]
+	ld	[%sp+$bias+$frame+8],$tpj	! tp[2]
+	ld	[$ap+4],$mul0			! ap[1]
+	ld	[$ap+8],$apj			! ap[2]
+	ld	[$np],$car1			! np[0]
+	ld	[$np+4],$npj			! np[1]
+	mulx	$n0,$tmp0,$mul1
+
+	mulx	$mul0,$mul0,$car0
+	and	$mul1,$mask,$mul1
+
+	mulx	$car1,$mul1,$car1
+	mulx	$npj,$mul1,$acc1
+	add	$tmp0,$car1,$car1
+	and	$car0,$mask,$acc0
+	ld	[$np+8],$npj			! np[2]
+	srlx	$car1,32,$car1
+	add	$tmp1,$car1,$car1
+	srlx	$car0,32,$car0
+	add	$acc0,$car1,$car1
+	and	$car0,1,$sbit
+	add	$acc1,$car1,$car1
+	srlx	$car0,1,$car0
+	mov	12,$j
+	st	$car1,[%sp+$bias+$frame]	! tp[0]=
+	srlx	$car1,32,$car1
+	add	%sp,$bias+$frame+4,$tp
+
+.Lsqr_2nd:
+	mulx	$apj,$mul0,$acc0
+	mulx	$npj,$mul1,$acc1
+	add	$acc0,$car0,$car0
+	add	$tpj,$car1,$car1
+	ld	[$ap+$j],$apj			! ap[j]
+	and	$car0,$mask,$acc0
+	ld	[$np+$j],$npj			! np[j]
+	srlx	$car0,32,$car0
+	add	$acc1,$car1,$car1
+	ld	[$tp+8],$tpj			! tp[j]
+	add	$acc0,$acc0,$acc0
+	add	$j,4,$j				! j++
+	or	$sbit,$acc0,$acc0
+	srlx	$acc0,32,$sbit
+	and	$acc0,$mask,$acc0
+	cmp	$j,$num
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp]			! tp[j-1]
+	srlx	$car1,32,$car1
+	bl	%icc,.Lsqr_2nd
+	add	$tp,4,$tp			! tp++
+!.Lsqr_2nd
+
+	mulx	$apj,$mul0,$acc0
+	mulx	$npj,$mul1,$acc1
+	add	$acc0,$car0,$car0
+	add	$tpj,$car1,$car1
+	and	$car0,$mask,$acc0
+	srlx	$car0,32,$car0
+	add	$acc1,$car1,$car1
+	add	$acc0,$acc0,$acc0
+	or	$sbit,$acc0,$acc0
+	srlx	$acc0,32,$sbit
+	and	$acc0,$mask,$acc0
+	add	$acc0,$car1,$car1
+	st	$car1,[$tp]			! tp[j-1]
+	srlx	$car1,32,$car1
+
+	add	$car0,$car0,$car0
+	or	$sbit,$car0,$car0
+	add	$car0,$car1,$car1
+	add	$car2,$car1,$car1
+	st	$car1,[$tp+4]
+	srlx	$car1,32,$car2
+
+	ld	[%sp+$bias+$frame],$tmp1	! tp[0]
+	ld	[%sp+$bias+$frame+4],$tpj	! tp[1]
+	ld	[$ap+8],$mul0			! ap[2]
+	ld	[$np],$car1			! np[0]
+	ld	[$np+4],$npj			! np[1]
+	mulx	$n0,$tmp1,$mul1
+	and	$mul1,$mask,$mul1
+	mov	8,$i
+
+	mulx	$mul0,$mul0,$car0
+	mulx	$car1,$mul1,$car1
+	and	$car0,$mask,$acc0
+	add	$tmp1,$car1,$car1
+	srlx	$car0,32,$car0
+	add	%sp,$bias+$frame,$tp
+	srlx	$car1,32,$car1
+	and	$car0,1,$sbit
+	srlx	$car0,1,$car0
+	mov	4,$j
+
+.Lsqr_outer:
+.Lsqr_inner1:
+	mulx	$npj,$mul1,$acc1
+	add	$tpj,$car1,$car1
+	add	$j,4,$j
+	ld	[$tp+8],$tpj
+	cmp	$j,$i
+	add	$acc1,$car1,$car1
+	ld	[$np+$j],$npj
+	st	$car1,[$tp]
+	srlx	$car1,32,$car1
+	bl	%icc,.Lsqr_inner1
+	add	$tp,4,$tp
+!.Lsqr_inner1
+
+	add	$j,4,$j
+	ld	[$ap+$j],$apj			! ap[j]
+	mulx	$npj,$mul1,$acc1
+	add	$tpj,$car1,$car1
+	ld	[$np+$j],$npj			! np[j]
+	add	$acc0,$car1,$car1
+	ld	[$tp+8],$tpj			! tp[j]
+	add	$acc1,$car1,$car1
+	st	$car1,[$tp]
+	srlx	$car1,32,$car1
+
+	add	$j,4,$j
+	cmp	$j,$num
+	be,pn	%icc,.Lsqr_no_inner2
+	add	$tp,4,$tp
+
+.Lsqr_inner2:
+	mulx	$apj,$mul0,$acc0
+	mulx	$npj,$mul1,$acc1
+	add	$tpj,$car1,$car1
+	add	$acc0,$car0,$car0
+	ld	[$ap+$j],$apj			! ap[j]
+	and	$car0,$mask,$acc0
+	ld	[$np+$j],$npj			! np[j]
+	srlx	$car0,32,$car0
+	add	$acc0,$acc0,$acc0
+	ld	[$tp+8],$tpj			! tp[j]
+	or	$sbit,$acc0,$acc0
+	add	$j,4,$j				! j++
+	srlx	$acc0,32,$sbit
+	and	$acc0,$mask,$acc0
+	cmp	$j,$num
+	add	$acc0,$car1,$car1
+	add	$acc1,$car1,$car1
+	st	$car1,[$tp]			! tp[j-1]
+	srlx	$car1,32,$car1
+	bl	%icc,.Lsqr_inner2
+	add	$tp,4,$tp			! tp++
+
+.Lsqr_no_inner2:
+	mulx	$apj,$mul0,$acc0
+	mulx	$npj,$mul1,$acc1
+	add	$tpj,$car1,$car1
+	add	$acc0,$car0,$car0
+	and	$car0,$mask,$acc0
+	srlx	$car0,32,$car0
+	add	$acc0,$acc0,$acc0
+	or	$sbit,$acc0,$acc0
+	srlx	$acc0,32,$sbit
+	and	$acc0,$mask,$acc0
+	add	$acc0,$car1,$car1
+	add	$acc1,$car1,$car1
+	st	$car1,[$tp]			! tp[j-1]
+	srlx	$car1,32,$car1
+
+	add	$car0,$car0,$car0
+	or	$sbit,$car0,$car0
+	add	$car0,$car1,$car1
+	add	$car2,$car1,$car1
+	st	$car1,[$tp+4]
+	srlx	$car1,32,$car2
+
+	add	$i,4,$i				! i++
+	ld	[%sp+$bias+$frame],$tmp1	! tp[0]
+	ld	[%sp+$bias+$frame+4],$tpj	! tp[1]
+	ld	[$ap+$i],$mul0			! ap[j]
+	ld	[$np],$car1			! np[0]
+	ld	[$np+4],$npj			! np[1]
+	mulx	$n0,$tmp1,$mul1
+	and	$mul1,$mask,$mul1
+	add	$i,4,$tmp0
+
+	mulx	$mul0,$mul0,$car0
+	mulx	$car1,$mul1,$car1
+	and	$car0,$mask,$acc0
+	add	$tmp1,$car1,$car1
+	srlx	$car0,32,$car0
+	add	%sp,$bias+$frame,$tp
+	srlx	$car1,32,$car1
+	and	$car0,1,$sbit
+	srlx	$car0,1,$car0
+
+	cmp	$tmp0,$num			! i<num-1
+	bl	%icc,.Lsqr_outer
+	mov	4,$j
+
+.Lsqr_last:
+	mulx	$npj,$mul1,$acc1
+	add	$tpj,$car1,$car1
+	add	$j,4,$j
+	ld	[$tp+8],$tpj
+	cmp	$j,$i
+	add	$acc1,$car1,$car1
+	ld	[$np+$j],$npj
+	st	$car1,[$tp]
+	srlx	$car1,32,$car1
+	bl	%icc,.Lsqr_last
+	add	$tp,4,$tp
+!.Lsqr_last
+
+	mulx	$npj,$mul1,$acc1
+	add	$tpj,$car1,$car1
+	add	$acc0,$car1,$car1
+	add	$acc1,$car1,$car1
+	st	$car1,[$tp]
+	srlx	$car1,32,$car1
+
+	add	$car0,$car0,$car0		! recover $car0
+	or	$sbit,$car0,$car0
+	add	$car0,$car1,$car1
+	add	$car2,$car1,$car1
+	st	$car1,[$tp+4]
+	srlx	$car1,32,$car2
+
+	ba	.Ltail
+	add	$tp,8,$tp
+.type	$fname,#function
+.size	$fname,(.-$fname)
+.asciz	"Montgomery Multipltication for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>"
+.align	32
+___
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/sparcv9a-mont.pl b/app/openssl/crypto/bn/asm/sparcv9a-mont.pl
new file mode 100755
index 00000000..a14205f2
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/sparcv9a-mont.pl
@@ -0,0 +1,882 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# October 2005
+#
+# "Teaser" Montgomery multiplication module for UltraSPARC. Why FPU?
+# Because unlike integer multiplier, which simply stalls whole CPU,
+# FPU is fully pipelined and can effectively emit 48 bit partial
+# product every cycle. Why not blended SPARC v9? One can argue that
+# making this module dependent on UltraSPARC VIS extension limits its
+# binary compatibility. Well yes, it does exclude SPARC64 prior-V(!)
+# implementations from compatibility matrix. But the rest, whole Sun
+# UltraSPARC family and brand new Fujitsu's SPARC64 V, all support
+# VIS extension instructions used in this module. This is considered
+# good enough to not care about HAL SPARC64 users [if any] who have
+# integer-only pure SPARCv9 module to "fall down" to.
+
+# USI&II cores currently exhibit uniform 2x improvement [over pre-
+# bn_mul_mont codebase] for all key lengths and benchmarks. On USIII
+# performance improves few percents for shorter keys and worsens few
+# percents for longer keys. This is because USIII integer multiplier
+# is >3x faster than USI&II one, which is harder to match [but see
+# TODO list below]. It should also be noted that SPARC64 V features
+# out-of-order execution, which *might* mean that integer multiplier
+# is pipelined, which in turn *might* be impossible to match... On
+# additional note, SPARC64 V implements FP Multiply-Add instruction,
+# which is perfectly usable in this context... In other words, as far
+# as Fujitsu SPARC64 V goes, talk to the author:-)
+
+# The implementation implies following "non-natural" limitations on
+# input arguments:
+# - num may not be less than 4;
+# - num has to be even;
+# Failure to meet either condition has no fatal effects, simply
+# doesn't give any performance gain.
+
+# TODO:
+# - modulo-schedule inner loop for better performance (on in-order
+#   execution core such as UltraSPARC this shall result in further
+#   noticeable(!) improvement);
+# - dedicated squaring procedure[?];
+
+######################################################################
+# November 2006
+#
+# Modulo-scheduled inner loops allow to interleave floating point and
+# integer instructions and minimize Read-After-Write penalties. This
+# results in *further* 20-50% perfromance improvement [depending on
+# key length, more for longer keys] on USI&II cores and 30-80% - on
+# USIII&IV.
+
+$fname="bn_mul_mont_fpu";
+$bits=32;
+for (@ARGV) { $bits=64 if (/\-m64/ || /\-xarch\=v9/); }
+
+if ($bits==64) {
+	$bias=2047;
+	$frame=192;
+} else {
+	$bias=0;
+	$frame=128;	# 96 rounded up to largest known cache-line
+}
+$locals=64;
+
+# In order to provide for 32-/64-bit ABI duality, I keep integers wider
+# than 32 bit in %g1-%g4 and %o0-%o5. %l0-%l7 and %i0-%i5 are used
+# exclusively for pointers, indexes and other small values...
+# int bn_mul_mont(
+$rp="%i0";	# BN_ULONG *rp,
+$ap="%i1";	# const BN_ULONG *ap,
+$bp="%i2";	# const BN_ULONG *bp,
+$np="%i3";	# const BN_ULONG *np,
+$n0="%i4";	# const BN_ULONG *n0,
+$num="%i5";	# int num);
+
+$tp="%l0";	# t[num]
+$ap_l="%l1";	# a[num],n[num] are smashed to 32-bit words and saved
+$ap_h="%l2";	# to these four vectors as double-precision FP values.
+$np_l="%l3";	# This way a bunch of fxtods are eliminated in second
+$np_h="%l4";	# loop and L1-cache aliasing is minimized...
+$i="%l5";
+$j="%l6";
+$mask="%l7";	# 16-bit mask, 0xffff
+
+$n0="%g4";	# reassigned(!) to "64-bit" register
+$carry="%i4";	# %i4 reused(!) for a carry bit
+
+# FP register naming chart
+#
+#     ..HILO
+#       dcba
+#   --------
+#        LOa
+#       LOb
+#      LOc
+#     LOd
+#      HIa
+#     HIb
+#    HIc
+#   HId
+#    ..a
+#   ..b
+$ba="%f0";    $bb="%f2";    $bc="%f4";    $bd="%f6";
+$na="%f8";    $nb="%f10";   $nc="%f12";   $nd="%f14";
+$alo="%f16";  $alo_="%f17"; $ahi="%f18";  $ahi_="%f19";
+$nlo="%f20";  $nlo_="%f21"; $nhi="%f22";  $nhi_="%f23";
+
+$dota="%f24"; $dotb="%f26";
+
+$aloa="%f32"; $alob="%f34"; $aloc="%f36"; $alod="%f38";
+$ahia="%f40"; $ahib="%f42"; $ahic="%f44"; $ahid="%f46";
+$nloa="%f48"; $nlob="%f50"; $nloc="%f52"; $nlod="%f54";
+$nhia="%f56"; $nhib="%f58"; $nhic="%f60"; $nhid="%f62";
+
+$ASI_FL16_P=0xD2;	# magic ASI value to engage 16-bit FP load
+
+$code=<<___;
+.section	".text",#alloc,#execinstr
+
+.global $fname
+.align  32
+$fname:
+	save	%sp,-$frame-$locals,%sp
+
+	cmp	$num,4
+	bl,a,pn %icc,.Lret
+	clr	%i0
+	andcc	$num,1,%g0		! $num has to be even...
+	bnz,a,pn %icc,.Lret
+	clr	%i0			! signal "unsupported input value"
+
+	srl	$num,1,$num
+	sethi	%hi(0xffff),$mask
+	ld	[%i4+0],$n0		! $n0 reassigned, remember?
+	or	$mask,%lo(0xffff),$mask
+	ld	[%i4+4],%o0
+	sllx	%o0,32,%o0
+	or	%o0,$n0,$n0		! $n0=n0[1].n0[0]
+
+	sll	$num,3,$num		! num*=8
+
+	add	%sp,$bias,%o0		! real top of stack
+	sll	$num,2,%o1
+	add	%o1,$num,%o1		! %o1=num*5
+	sub	%o0,%o1,%o0
+	and	%o0,-2048,%o0		! optimize TLB utilization
+	sub	%o0,$bias,%sp		! alloca(5*num*8)
+
+	rd	%asi,%o7		! save %asi
+	add	%sp,$bias+$frame+$locals,$tp
+	add	$tp,$num,$ap_l
+	add	$ap_l,$num,$ap_l	! [an]p_[lh] point at the vectors' ends !
+	add	$ap_l,$num,$ap_h
+	add	$ap_h,$num,$np_l
+	add	$np_l,$num,$np_h
+
+	wr	%g0,$ASI_FL16_P,%asi	! setup %asi for 16-bit FP loads
+
+	add	$rp,$num,$rp		! readjust input pointers to point
+	add	$ap,$num,$ap		! at the ends too...
+	add	$bp,$num,$bp
+	add	$np,$num,$np
+
+	stx	%o7,[%sp+$bias+$frame+48]	! save %asi
+
+	sub	%g0,$num,$i		! i=-num
+	sub	%g0,$num,$j		! j=-num
+
+	add	$ap,$j,%o3
+	add	$bp,$i,%o4
+
+	ld	[%o3+4],%g1		! bp[0]
+	ld	[%o3+0],%o0
+	ld	[%o4+4],%g5		! ap[0]
+	sllx	%g1,32,%g1
+	ld	[%o4+0],%o1
+	sllx	%g5,32,%g5
+	or	%g1,%o0,%o0
+	or	%g5,%o1,%o1
+
+	add	$np,$j,%o5
+
+	mulx	%o1,%o0,%o0		! ap[0]*bp[0]
+	mulx	$n0,%o0,%o0		! ap[0]*bp[0]*n0
+	stx	%o0,[%sp+$bias+$frame+0]
+
+	ld	[%o3+0],$alo_	! load a[j] as pair of 32-bit words
+	fzeros	$alo
+	ld	[%o3+4],$ahi_
+	fzeros	$ahi
+	ld	[%o5+0],$nlo_	! load n[j] as pair of 32-bit words
+	fzeros	$nlo
+	ld	[%o5+4],$nhi_
+	fzeros	$nhi
+
+	! transfer b[i] to FPU as 4x16-bit values
+	ldda	[%o4+2]%asi,$ba
+	fxtod	$alo,$alo
+	ldda	[%o4+0]%asi,$bb
+	fxtod	$ahi,$ahi
+	ldda	[%o4+6]%asi,$bc
+	fxtod	$nlo,$nlo
+	ldda	[%o4+4]%asi,$bd
+	fxtod	$nhi,$nhi
+
+	! transfer ap[0]*b[0]*n0 to FPU as 4x16-bit values
+	ldda	[%sp+$bias+$frame+6]%asi,$na
+	fxtod	$ba,$ba
+	ldda	[%sp+$bias+$frame+4]%asi,$nb
+	fxtod	$bb,$bb
+	ldda	[%sp+$bias+$frame+2]%asi,$nc
+	fxtod	$bc,$bc
+	ldda	[%sp+$bias+$frame+0]%asi,$nd
+	fxtod	$bd,$bd
+
+	std	$alo,[$ap_l+$j]		! save smashed ap[j] in double format
+	fxtod	$na,$na
+	std	$ahi,[$ap_h+$j]
+	fxtod	$nb,$nb
+	std	$nlo,[$np_l+$j]		! save smashed np[j] in double format
+	fxtod	$nc,$nc
+	std	$nhi,[$np_h+$j]
+	fxtod	$nd,$nd
+
+		fmuld	$alo,$ba,$aloa
+		fmuld	$nlo,$na,$nloa
+		fmuld	$alo,$bb,$alob
+		fmuld	$nlo,$nb,$nlob
+		fmuld	$alo,$bc,$aloc
+	faddd	$aloa,$nloa,$nloa
+		fmuld	$nlo,$nc,$nloc
+		fmuld	$alo,$bd,$alod
+	faddd	$alob,$nlob,$nlob
+		fmuld	$nlo,$nd,$nlod
+		fmuld	$ahi,$ba,$ahia
+	faddd	$aloc,$nloc,$nloc
+		fmuld	$nhi,$na,$nhia
+		fmuld	$ahi,$bb,$ahib
+	faddd	$alod,$nlod,$nlod
+		fmuld	$nhi,$nb,$nhib
+		fmuld	$ahi,$bc,$ahic
+	faddd	$ahia,$nhia,$nhia
+		fmuld	$nhi,$nc,$nhic
+		fmuld	$ahi,$bd,$ahid
+	faddd	$ahib,$nhib,$nhib
+		fmuld	$nhi,$nd,$nhid
+
+	faddd	$ahic,$nhic,$dota	! $nhic
+	faddd	$ahid,$nhid,$dotb	! $nhid
+
+	faddd	$nloc,$nhia,$nloc
+	faddd	$nlod,$nhib,$nlod
+
+	fdtox	$nloa,$nloa
+	fdtox	$nlob,$nlob
+	fdtox	$nloc,$nloc
+	fdtox	$nlod,$nlod
+
+	std	$nloa,[%sp+$bias+$frame+0]
+	add	$j,8,$j
+	std	$nlob,[%sp+$bias+$frame+8]
+	add	$ap,$j,%o4
+	std	$nloc,[%sp+$bias+$frame+16]
+	add	$np,$j,%o5
+	std	$nlod,[%sp+$bias+$frame+24]
+
+	ld	[%o4+0],$alo_	! load a[j] as pair of 32-bit words
+	fzeros	$alo
+	ld	[%o4+4],$ahi_
+	fzeros	$ahi
+	ld	[%o5+0],$nlo_	! load n[j] as pair of 32-bit words
+	fzeros	$nlo
+	ld	[%o5+4],$nhi_
+	fzeros	$nhi
+
+	fxtod	$alo,$alo
+	fxtod	$ahi,$ahi
+	fxtod	$nlo,$nlo
+	fxtod	$nhi,$nhi
+
+	ldx	[%sp+$bias+$frame+0],%o0
+		fmuld	$alo,$ba,$aloa
+	ldx	[%sp+$bias+$frame+8],%o1
+		fmuld	$nlo,$na,$nloa
+	ldx	[%sp+$bias+$frame+16],%o2
+		fmuld	$alo,$bb,$alob
+	ldx	[%sp+$bias+$frame+24],%o3
+		fmuld	$nlo,$nb,$nlob
+
+	srlx	%o0,16,%o7
+	std	$alo,[$ap_l+$j]		! save smashed ap[j] in double format
+		fmuld	$alo,$bc,$aloc
+	add	%o7,%o1,%o1
+	std	$ahi,[$ap_h+$j]
+		faddd	$aloa,$nloa,$nloa
+		fmuld	$nlo,$nc,$nloc
+	srlx	%o1,16,%o7
+	std	$nlo,[$np_l+$j]		! save smashed np[j] in double format
+		fmuld	$alo,$bd,$alod
+	add	%o7,%o2,%o2
+	std	$nhi,[$np_h+$j]
+		faddd	$alob,$nlob,$nlob
+		fmuld	$nlo,$nd,$nlod
+	srlx	%o2,16,%o7
+		fmuld	$ahi,$ba,$ahia
+	add	%o7,%o3,%o3		! %o3.%o2[0..15].%o1[0..15].%o0[0..15]
+		faddd	$aloc,$nloc,$nloc
+		fmuld	$nhi,$na,$nhia
+	!and	%o0,$mask,%o0
+	!and	%o1,$mask,%o1
+	!and	%o2,$mask,%o2
+	!sllx	%o1,16,%o1
+	!sllx	%o2,32,%o2
+	!sllx	%o3,48,%o7
+	!or	%o1,%o0,%o0
+	!or	%o2,%o0,%o0
+	!or	%o7,%o0,%o0		! 64-bit result
+	srlx	%o3,16,%g1		! 34-bit carry
+		fmuld	$ahi,$bb,$ahib
+
+	faddd	$alod,$nlod,$nlod
+		fmuld	$nhi,$nb,$nhib
+		fmuld	$ahi,$bc,$ahic
+	faddd	$ahia,$nhia,$nhia
+		fmuld	$nhi,$nc,$nhic
+		fmuld	$ahi,$bd,$ahid
+	faddd	$ahib,$nhib,$nhib
+		fmuld	$nhi,$nd,$nhid
+
+	faddd	$dota,$nloa,$nloa
+	faddd	$dotb,$nlob,$nlob
+	faddd	$ahic,$nhic,$dota	! $nhic
+	faddd	$ahid,$nhid,$dotb	! $nhid
+
+	faddd	$nloc,$nhia,$nloc
+	faddd	$nlod,$nhib,$nlod
+
+	fdtox	$nloa,$nloa
+	fdtox	$nlob,$nlob
+	fdtox	$nloc,$nloc
+	fdtox	$nlod,$nlod
+
+	std	$nloa,[%sp+$bias+$frame+0]
+	std	$nlob,[%sp+$bias+$frame+8]
+	addcc	$j,8,$j
+	std	$nloc,[%sp+$bias+$frame+16]
+	bz,pn	%icc,.L1stskip
+	std	$nlod,[%sp+$bias+$frame+24]
+
+.align	32			! incidentally already aligned !
+.L1st:
+	add	$ap,$j,%o4
+	add	$np,$j,%o5
+	ld	[%o4+0],$alo_	! load a[j] as pair of 32-bit words
+	fzeros	$alo
+	ld	[%o4+4],$ahi_
+	fzeros	$ahi
+	ld	[%o5+0],$nlo_	! load n[j] as pair of 32-bit words
+	fzeros	$nlo
+	ld	[%o5+4],$nhi_
+	fzeros	$nhi
+
+	fxtod	$alo,$alo
+	fxtod	$ahi,$ahi
+	fxtod	$nlo,$nlo
+	fxtod	$nhi,$nhi
+
+	ldx	[%sp+$bias+$frame+0],%o0
+		fmuld	$alo,$ba,$aloa
+	ldx	[%sp+$bias+$frame+8],%o1
+		fmuld	$nlo,$na,$nloa
+	ldx	[%sp+$bias+$frame+16],%o2
+		fmuld	$alo,$bb,$alob
+	ldx	[%sp+$bias+$frame+24],%o3
+		fmuld	$nlo,$nb,$nlob
+
+	srlx	%o0,16,%o7
+	std	$alo,[$ap_l+$j]		! save smashed ap[j] in double format
+		fmuld	$alo,$bc,$aloc
+	add	%o7,%o1,%o1
+	std	$ahi,[$ap_h+$j]
+		faddd	$aloa,$nloa,$nloa
+		fmuld	$nlo,$nc,$nloc
+	srlx	%o1,16,%o7
+	std	$nlo,[$np_l+$j]		! save smashed np[j] in double format
+		fmuld	$alo,$bd,$alod
+	add	%o7,%o2,%o2
+	std	$nhi,[$np_h+$j]
+		faddd	$alob,$nlob,$nlob
+		fmuld	$nlo,$nd,$nlod
+	srlx	%o2,16,%o7
+		fmuld	$ahi,$ba,$ahia
+	add	%o7,%o3,%o3		! %o3.%o2[0..15].%o1[0..15].%o0[0..15]
+	and	%o0,$mask,%o0
+		faddd	$aloc,$nloc,$nloc
+		fmuld	$nhi,$na,$nhia
+	and	%o1,$mask,%o1
+	and	%o2,$mask,%o2
+		fmuld	$ahi,$bb,$ahib
+	sllx	%o1,16,%o1
+		faddd	$alod,$nlod,$nlod
+		fmuld	$nhi,$nb,$nhib
+	sllx	%o2,32,%o2
+		fmuld	$ahi,$bc,$ahic
+	sllx	%o3,48,%o7
+	or	%o1,%o0,%o0
+		faddd	$ahia,$nhia,$nhia
+		fmuld	$nhi,$nc,$nhic
+	or	%o2,%o0,%o0
+		fmuld	$ahi,$bd,$ahid
+	or	%o7,%o0,%o0		! 64-bit result
+		faddd	$ahib,$nhib,$nhib
+		fmuld	$nhi,$nd,$nhid
+	addcc	%g1,%o0,%o0
+		faddd	$dota,$nloa,$nloa
+	srlx	%o3,16,%g1		! 34-bit carry
+		faddd	$dotb,$nlob,$nlob
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	stx	%o0,[$tp]		! tp[j-1]=
+
+	faddd	$ahic,$nhic,$dota	! $nhic
+	faddd	$ahid,$nhid,$dotb	! $nhid
+
+	faddd	$nloc,$nhia,$nloc
+	faddd	$nlod,$nhib,$nlod
+
+	fdtox	$nloa,$nloa
+	fdtox	$nlob,$nlob
+	fdtox	$nloc,$nloc
+	fdtox	$nlod,$nlod
+
+	std	$nloa,[%sp+$bias+$frame+0]
+	std	$nlob,[%sp+$bias+$frame+8]
+	std	$nloc,[%sp+$bias+$frame+16]
+	std	$nlod,[%sp+$bias+$frame+24]
+
+	addcc	$j,8,$j
+	bnz,pt	%icc,.L1st
+	add	$tp,8,$tp
+
+.L1stskip:
+	fdtox	$dota,$dota
+	fdtox	$dotb,$dotb
+
+	ldx	[%sp+$bias+$frame+0],%o0
+	ldx	[%sp+$bias+$frame+8],%o1
+	ldx	[%sp+$bias+$frame+16],%o2
+	ldx	[%sp+$bias+$frame+24],%o3
+
+	srlx	%o0,16,%o7
+	std	$dota,[%sp+$bias+$frame+32]
+	add	%o7,%o1,%o1
+	std	$dotb,[%sp+$bias+$frame+40]
+	srlx	%o1,16,%o7
+	add	%o7,%o2,%o2
+	srlx	%o2,16,%o7
+	add	%o7,%o3,%o3		! %o3.%o2[0..15].%o1[0..15].%o0[0..15]
+	and	%o0,$mask,%o0
+	and	%o1,$mask,%o1
+	and	%o2,$mask,%o2
+	sllx	%o1,16,%o1
+	sllx	%o2,32,%o2
+	sllx	%o3,48,%o7
+	or	%o1,%o0,%o0
+	or	%o2,%o0,%o0
+	or	%o7,%o0,%o0		! 64-bit result
+	ldx	[%sp+$bias+$frame+32],%o4
+	addcc	%g1,%o0,%o0
+	ldx	[%sp+$bias+$frame+40],%o5
+	srlx	%o3,16,%g1		! 34-bit carry
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	stx	%o0,[$tp]		! tp[j-1]=
+	add	$tp,8,$tp
+
+	srlx	%o4,16,%o7
+	add	%o7,%o5,%o5
+	and	%o4,$mask,%o4
+	sllx	%o5,16,%o7
+	or	%o7,%o4,%o4
+	addcc	%g1,%o4,%o4
+	srlx	%o5,48,%g1
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	mov	%g1,$carry
+	stx	%o4,[$tp]		! tp[num-1]=
+
+	ba	.Louter
+	add	$i,8,$i
+.align	32
+.Louter:
+	sub	%g0,$num,$j		! j=-num
+	add	%sp,$bias+$frame+$locals,$tp
+
+	add	$ap,$j,%o3
+	add	$bp,$i,%o4
+
+	ld	[%o3+4],%g1		! bp[i]
+	ld	[%o3+0],%o0
+	ld	[%o4+4],%g5		! ap[0]
+	sllx	%g1,32,%g1
+	ld	[%o4+0],%o1
+	sllx	%g5,32,%g5
+	or	%g1,%o0,%o0
+	or	%g5,%o1,%o1
+
+	ldx	[$tp],%o2		! tp[0]
+	mulx	%o1,%o0,%o0
+	addcc	%o2,%o0,%o0
+	mulx	$n0,%o0,%o0		! (ap[0]*bp[i]+t[0])*n0
+	stx	%o0,[%sp+$bias+$frame+0]
+
+	! transfer b[i] to FPU as 4x16-bit values
+	ldda	[%o4+2]%asi,$ba
+	ldda	[%o4+0]%asi,$bb
+	ldda	[%o4+6]%asi,$bc
+	ldda	[%o4+4]%asi,$bd
+
+	! transfer (ap[0]*b[i]+t[0])*n0 to FPU as 4x16-bit values
+	ldda	[%sp+$bias+$frame+6]%asi,$na
+	fxtod	$ba,$ba
+	ldda	[%sp+$bias+$frame+4]%asi,$nb
+	fxtod	$bb,$bb
+	ldda	[%sp+$bias+$frame+2]%asi,$nc
+	fxtod	$bc,$bc
+	ldda	[%sp+$bias+$frame+0]%asi,$nd
+	fxtod	$bd,$bd
+	ldd	[$ap_l+$j],$alo		! load a[j] in double format
+	fxtod	$na,$na
+	ldd	[$ap_h+$j],$ahi
+	fxtod	$nb,$nb
+	ldd	[$np_l+$j],$nlo		! load n[j] in double format
+	fxtod	$nc,$nc
+	ldd	[$np_h+$j],$nhi
+	fxtod	$nd,$nd
+
+		fmuld	$alo,$ba,$aloa
+		fmuld	$nlo,$na,$nloa
+		fmuld	$alo,$bb,$alob
+		fmuld	$nlo,$nb,$nlob
+		fmuld	$alo,$bc,$aloc
+	faddd	$aloa,$nloa,$nloa
+		fmuld	$nlo,$nc,$nloc
+		fmuld	$alo,$bd,$alod
+	faddd	$alob,$nlob,$nlob
+		fmuld	$nlo,$nd,$nlod
+		fmuld	$ahi,$ba,$ahia
+	faddd	$aloc,$nloc,$nloc
+		fmuld	$nhi,$na,$nhia
+		fmuld	$ahi,$bb,$ahib
+	faddd	$alod,$nlod,$nlod
+		fmuld	$nhi,$nb,$nhib
+		fmuld	$ahi,$bc,$ahic
+	faddd	$ahia,$nhia,$nhia
+		fmuld	$nhi,$nc,$nhic
+		fmuld	$ahi,$bd,$ahid
+	faddd	$ahib,$nhib,$nhib
+		fmuld	$nhi,$nd,$nhid
+
+	faddd	$ahic,$nhic,$dota	! $nhic
+	faddd	$ahid,$nhid,$dotb	! $nhid
+
+	faddd	$nloc,$nhia,$nloc
+	faddd	$nlod,$nhib,$nlod
+
+	fdtox	$nloa,$nloa
+	fdtox	$nlob,$nlob
+	fdtox	$nloc,$nloc
+	fdtox	$nlod,$nlod
+
+	std	$nloa,[%sp+$bias+$frame+0]
+	std	$nlob,[%sp+$bias+$frame+8]
+	std	$nloc,[%sp+$bias+$frame+16]
+	add	$j,8,$j
+	std	$nlod,[%sp+$bias+$frame+24]
+
+	ldd	[$ap_l+$j],$alo		! load a[j] in double format
+	ldd	[$ap_h+$j],$ahi
+	ldd	[$np_l+$j],$nlo		! load n[j] in double format
+	ldd	[$np_h+$j],$nhi
+
+		fmuld	$alo,$ba,$aloa
+		fmuld	$nlo,$na,$nloa
+		fmuld	$alo,$bb,$alob
+		fmuld	$nlo,$nb,$nlob
+		fmuld	$alo,$bc,$aloc
+	ldx	[%sp+$bias+$frame+0],%o0
+		faddd	$aloa,$nloa,$nloa
+		fmuld	$nlo,$nc,$nloc
+	ldx	[%sp+$bias+$frame+8],%o1
+		fmuld	$alo,$bd,$alod
+	ldx	[%sp+$bias+$frame+16],%o2
+		faddd	$alob,$nlob,$nlob
+		fmuld	$nlo,$nd,$nlod
+	ldx	[%sp+$bias+$frame+24],%o3
+		fmuld	$ahi,$ba,$ahia
+
+	srlx	%o0,16,%o7
+		faddd	$aloc,$nloc,$nloc
+		fmuld	$nhi,$na,$nhia
+	add	%o7,%o1,%o1
+		fmuld	$ahi,$bb,$ahib
+	srlx	%o1,16,%o7
+		faddd	$alod,$nlod,$nlod
+		fmuld	$nhi,$nb,$nhib
+	add	%o7,%o2,%o2
+		fmuld	$ahi,$bc,$ahic
+	srlx	%o2,16,%o7
+		faddd	$ahia,$nhia,$nhia
+		fmuld	$nhi,$nc,$nhic
+	add	%o7,%o3,%o3		! %o3.%o2[0..15].%o1[0..15].%o0[0..15]
+	! why?
+	and	%o0,$mask,%o0
+		fmuld	$ahi,$bd,$ahid
+	and	%o1,$mask,%o1
+	and	%o2,$mask,%o2
+		faddd	$ahib,$nhib,$nhib
+		fmuld	$nhi,$nd,$nhid
+	sllx	%o1,16,%o1
+		faddd	$dota,$nloa,$nloa
+	sllx	%o2,32,%o2
+		faddd	$dotb,$nlob,$nlob
+	sllx	%o3,48,%o7
+	or	%o1,%o0,%o0
+		faddd	$ahic,$nhic,$dota	! $nhic
+	or	%o2,%o0,%o0
+		faddd	$ahid,$nhid,$dotb	! $nhid
+	or	%o7,%o0,%o0		! 64-bit result
+	ldx	[$tp],%o7
+		faddd	$nloc,$nhia,$nloc
+	addcc	%o7,%o0,%o0
+	! end-of-why?
+		faddd	$nlod,$nhib,$nlod
+	srlx	%o3,16,%g1		! 34-bit carry
+		fdtox	$nloa,$nloa
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	fdtox	$nlob,$nlob
+	fdtox	$nloc,$nloc
+	fdtox	$nlod,$nlod
+
+	std	$nloa,[%sp+$bias+$frame+0]
+	std	$nlob,[%sp+$bias+$frame+8]
+	addcc	$j,8,$j
+	std	$nloc,[%sp+$bias+$frame+16]
+	bz,pn	%icc,.Linnerskip
+	std	$nlod,[%sp+$bias+$frame+24]
+
+	ba	.Linner
+	nop
+.align	32
+.Linner:
+	ldd	[$ap_l+$j],$alo		! load a[j] in double format
+	ldd	[$ap_h+$j],$ahi
+	ldd	[$np_l+$j],$nlo		! load n[j] in double format
+	ldd	[$np_h+$j],$nhi
+
+		fmuld	$alo,$ba,$aloa
+		fmuld	$nlo,$na,$nloa
+		fmuld	$alo,$bb,$alob
+		fmuld	$nlo,$nb,$nlob
+		fmuld	$alo,$bc,$aloc
+	ldx	[%sp+$bias+$frame+0],%o0
+		faddd	$aloa,$nloa,$nloa
+		fmuld	$nlo,$nc,$nloc
+	ldx	[%sp+$bias+$frame+8],%o1
+		fmuld	$alo,$bd,$alod
+	ldx	[%sp+$bias+$frame+16],%o2
+		faddd	$alob,$nlob,$nlob
+		fmuld	$nlo,$nd,$nlod
+	ldx	[%sp+$bias+$frame+24],%o3
+		fmuld	$ahi,$ba,$ahia
+
+	srlx	%o0,16,%o7
+		faddd	$aloc,$nloc,$nloc
+		fmuld	$nhi,$na,$nhia
+	add	%o7,%o1,%o1
+		fmuld	$ahi,$bb,$ahib
+	srlx	%o1,16,%o7
+		faddd	$alod,$nlod,$nlod
+		fmuld	$nhi,$nb,$nhib
+	add	%o7,%o2,%o2
+		fmuld	$ahi,$bc,$ahic
+	srlx	%o2,16,%o7
+		faddd	$ahia,$nhia,$nhia
+		fmuld	$nhi,$nc,$nhic
+	add	%o7,%o3,%o3		! %o3.%o2[0..15].%o1[0..15].%o0[0..15]
+	and	%o0,$mask,%o0
+		fmuld	$ahi,$bd,$ahid
+	and	%o1,$mask,%o1
+	and	%o2,$mask,%o2
+		faddd	$ahib,$nhib,$nhib
+		fmuld	$nhi,$nd,$nhid
+	sllx	%o1,16,%o1
+		faddd	$dota,$nloa,$nloa
+	sllx	%o2,32,%o2
+		faddd	$dotb,$nlob,$nlob
+	sllx	%o3,48,%o7
+	or	%o1,%o0,%o0
+		faddd	$ahic,$nhic,$dota	! $nhic
+	or	%o2,%o0,%o0
+		faddd	$ahid,$nhid,$dotb	! $nhid
+	or	%o7,%o0,%o0		! 64-bit result
+		faddd	$nloc,$nhia,$nloc
+	addcc	%g1,%o0,%o0
+	ldx	[$tp+8],%o7		! tp[j]
+		faddd	$nlod,$nhib,$nlod
+	srlx	%o3,16,%g1		! 34-bit carry
+		fdtox	$nloa,$nloa
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+		fdtox	$nlob,$nlob
+	addcc	%o7,%o0,%o0
+		fdtox	$nloc,$nloc
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	stx	%o0,[$tp]		! tp[j-1]
+		fdtox	$nlod,$nlod
+
+	std	$nloa,[%sp+$bias+$frame+0]
+	std	$nlob,[%sp+$bias+$frame+8]
+	std	$nloc,[%sp+$bias+$frame+16]
+	addcc	$j,8,$j
+	std	$nlod,[%sp+$bias+$frame+24]
+	bnz,pt	%icc,.Linner
+	add	$tp,8,$tp
+
+.Linnerskip:
+	fdtox	$dota,$dota
+	fdtox	$dotb,$dotb
+
+	ldx	[%sp+$bias+$frame+0],%o0
+	ldx	[%sp+$bias+$frame+8],%o1
+	ldx	[%sp+$bias+$frame+16],%o2
+	ldx	[%sp+$bias+$frame+24],%o3
+
+	srlx	%o0,16,%o7
+	std	$dota,[%sp+$bias+$frame+32]
+	add	%o7,%o1,%o1
+	std	$dotb,[%sp+$bias+$frame+40]
+	srlx	%o1,16,%o7
+	add	%o7,%o2,%o2
+	srlx	%o2,16,%o7
+	add	%o7,%o3,%o3		! %o3.%o2[0..15].%o1[0..15].%o0[0..15]
+	and	%o0,$mask,%o0
+	and	%o1,$mask,%o1
+	and	%o2,$mask,%o2
+	sllx	%o1,16,%o1
+	sllx	%o2,32,%o2
+	sllx	%o3,48,%o7
+	or	%o1,%o0,%o0
+	or	%o2,%o0,%o0
+	ldx	[%sp+$bias+$frame+32],%o4
+	or	%o7,%o0,%o0		! 64-bit result
+	ldx	[%sp+$bias+$frame+40],%o5
+	addcc	%g1,%o0,%o0
+	ldx	[$tp+8],%o7		! tp[j]
+	srlx	%o3,16,%g1		! 34-bit carry
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	addcc	%o7,%o0,%o0
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	stx	%o0,[$tp]		! tp[j-1]
+	add	$tp,8,$tp
+
+	srlx	%o4,16,%o7
+	add	%o7,%o5,%o5
+	and	%o4,$mask,%o4
+	sllx	%o5,16,%o7
+	or	%o7,%o4,%o4
+	addcc	%g1,%o4,%o4
+	srlx	%o5,48,%g1
+	bcs,a	%xcc,.+8
+	add	%g1,1,%g1
+
+	addcc	$carry,%o4,%o4
+	stx	%o4,[$tp]		! tp[num-1]
+	mov	%g1,$carry
+	bcs,a	%xcc,.+8
+	add	$carry,1,$carry
+
+	addcc	$i,8,$i
+	bnz	%icc,.Louter
+	nop
+
+	add	$tp,8,$tp		! adjust tp to point at the end
+	orn	%g0,%g0,%g4
+	sub	%g0,$num,%o7		! n=-num
+	ba	.Lsub
+	subcc	%g0,%g0,%g0		! clear %icc.c
+
+.align	32
+.Lsub:
+	ldx	[$tp+%o7],%o0
+	add	$np,%o7,%g1
+	ld	[%g1+0],%o2
+	ld	[%g1+4],%o3
+	srlx	%o0,32,%o1
+	subccc	%o0,%o2,%o2
+	add	$rp,%o7,%g1
+	subccc	%o1,%o3,%o3
+	st	%o2,[%g1+0]
+	add	%o7,8,%o7
+	brnz,pt	%o7,.Lsub
+	st	%o3,[%g1+4]
+	subc	$carry,0,%g4
+	sub	%g0,$num,%o7		! n=-num
+	ba	.Lcopy
+	nop
+
+.align	32
+.Lcopy:
+	ldx	[$tp+%o7],%o0
+	add	$rp,%o7,%g1
+	ld	[%g1+0],%o2
+	ld	[%g1+4],%o3
+	stx	%g0,[$tp+%o7]
+	and	%o0,%g4,%o0
+	srlx	%o0,32,%o1
+	andn	%o2,%g4,%o2
+	andn	%o3,%g4,%o3
+	or	%o2,%o0,%o0
+	or	%o3,%o1,%o1
+	st	%o0,[%g1+0]
+	add	%o7,8,%o7
+	brnz,pt	%o7,.Lcopy
+	st	%o1,[%g1+4]
+	sub	%g0,$num,%o7		! n=-num
+
+.Lzap:
+	stx	%g0,[$ap_l+%o7]
+	stx	%g0,[$ap_h+%o7]
+	stx	%g0,[$np_l+%o7]
+	stx	%g0,[$np_h+%o7]
+	add	%o7,8,%o7
+	brnz,pt	%o7,.Lzap
+	nop
+
+	ldx	[%sp+$bias+$frame+48],%o7
+	wr	%g0,%o7,%asi		! restore %asi
+
+	mov	1,%i0
+.Lret:
+	ret
+	restore
+.type   $fname,#function
+.size	$fname,(.-$fname)
+.asciz	"Montgomery Multipltication for UltraSPARC, CRYPTOGAMS by <appro\@openssl.org>"
+.align	32
+___
+
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+
+# Below substitution makes it possible to compile without demanding
+# VIS extentions on command line, e.g. -xarch=v9 vs. -xarch=v9a. I
+# dare to do this, because VIS capability is detected at run-time now
+# and this routine is not called on CPU not capable to execute it. Do
+# note that fzeros is not the only VIS dependency! Another dependency
+# is implicit and is just _a_ numerical value loaded to %asi register,
+# which assembler can't recognize as VIS specific...
+$code =~ s/fzeros\s+%f([0-9]+)/
+	   sprintf(".word\t0x%x\t! fzeros %%f%d",0x81b00c20|($1<<25),$1)
+	  /gem;
+
+print $code;
+# flush
+close STDOUT;
diff --git a/app/openssl/crypto/bn/asm/via-mont.pl b/app/openssl/crypto/bn/asm/via-mont.pl
new file mode 100644
index 00000000..c046a514
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/via-mont.pl
@@ -0,0 +1,242 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# Wrapper around 'rep montmul', VIA-specific instruction accessing
+# PadLock Montgomery Multiplier. The wrapper is designed as drop-in
+# replacement for OpenSSL bn_mul_mont [first implemented in 0.9.9].
+#
+# Below are interleaved outputs from 'openssl speed rsa dsa' for 4
+# different software configurations on 1.5GHz VIA Esther processor.
+# Lines marked with "software integer" denote performance of hand-
+# coded integer-only assembler found in OpenSSL 0.9.7. "Software SSE2"
+# refers to hand-coded SSE2 Montgomery multiplication procedure found
+# OpenSSL 0.9.9. "Hardware VIA SDK" refers to padlock_pmm routine from
+# Padlock SDK 2.0.1 available for download from VIA, which naturally
+# utilizes the magic 'repz montmul' instruction. And finally "hardware
+# this" refers to *this* implementation which also uses 'repz montmul'
+#
+#                   sign    verify    sign/s verify/s
+# rsa  512 bits 0.001720s 0.000140s    581.4   7149.7	software integer
+# rsa  512 bits 0.000690s 0.000086s   1450.3  11606.0	software SSE2
+# rsa  512 bits 0.006136s 0.000201s    163.0   4974.5	hardware VIA SDK
+# rsa  512 bits 0.000712s 0.000050s   1404.9  19858.5	hardware this
+#
+# rsa 1024 bits 0.008518s 0.000413s    117.4   2420.8	software integer
+# rsa 1024 bits 0.004275s 0.000277s    233.9   3609.7	software SSE2
+# rsa 1024 bits 0.012136s 0.000260s     82.4   3844.5	hardware VIA SDK
+# rsa 1024 bits 0.002522s 0.000116s    396.5   8650.9	hardware this
+#
+# rsa 2048 bits 0.050101s 0.001371s     20.0    729.6	software integer
+# rsa 2048 bits 0.030273s 0.001008s     33.0    991.9	software SSE2
+# rsa 2048 bits 0.030833s 0.000976s     32.4   1025.1	hardware VIA SDK
+# rsa 2048 bits 0.011879s 0.000342s     84.2   2921.7	hardware this
+#
+# rsa 4096 bits 0.327097s 0.004859s      3.1    205.8	software integer
+# rsa 4096 bits 0.229318s 0.003859s      4.4    259.2	software SSE2
+# rsa 4096 bits 0.233953s 0.003274s      4.3    305.4	hardware VIA SDK
+# rsa 4096 bits 0.070493s 0.001166s     14.2    857.6	hardware this
+#
+# dsa  512 bits 0.001342s 0.001651s    745.2    605.7	software integer
+# dsa  512 bits 0.000844s 0.000987s   1185.3   1013.1	software SSE2
+# dsa  512 bits 0.001902s 0.002247s    525.6    444.9	hardware VIA SDK
+# dsa  512 bits 0.000458s 0.000524s   2182.2   1909.1	hardware this
+#
+# dsa 1024 bits 0.003964s 0.004926s    252.3    203.0	software integer
+# dsa 1024 bits 0.002686s 0.003166s    372.3    315.8	software SSE2
+# dsa 1024 bits 0.002397s 0.002823s    417.1    354.3	hardware VIA SDK
+# dsa 1024 bits 0.000978s 0.001170s   1022.2    855.0	hardware this
+#
+# dsa 2048 bits 0.013280s 0.016518s     75.3     60.5	software integer
+# dsa 2048 bits 0.009911s 0.011522s    100.9     86.8	software SSE2
+# dsa 2048 bits 0.009542s 0.011763s    104.8     85.0	hardware VIA SDK
+# dsa 2048 bits 0.002884s 0.003352s    346.8    298.3	hardware this
+#
+# To give you some other reference point here is output for 2.4GHz P4
+# running hand-coded SSE2 bn_mul_mont found in 0.9.9, i.e. "software
+# SSE2" in above terms.
+#
+# rsa  512 bits 0.000407s 0.000047s   2454.2  21137.0
+# rsa 1024 bits 0.002426s 0.000141s    412.1   7100.0
+# rsa 2048 bits 0.015046s 0.000491s     66.5   2034.9
+# rsa 4096 bits 0.109770s 0.002379s      9.1    420.3
+# dsa  512 bits 0.000438s 0.000525s   2281.1   1904.1
+# dsa 1024 bits 0.001346s 0.001595s    742.7    627.0
+# dsa 2048 bits 0.004745s 0.005582s    210.7    179.1
+#
+# Conclusions: 
+# - VIA SDK leaves a *lot* of room for improvement (which this
+#   implementation successfully fills:-);
+# - 'rep montmul' gives up to >3x performance improvement depending on
+#   key length;
+# - in terms of absolute performance it delivers approximately as much
+#   as modern out-of-order 32-bit cores [again, for longer keys].
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],"via-mont.pl");
+
+# int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num);
+$func="bn_mul_mont_padlock";
+
+$pad=16*1;	# amount of reserved bytes on top of every vector
+
+# stack layout
+$mZeroPrime=&DWP(0,"esp");		# these are specified by VIA
+$A=&DWP(4,"esp");
+$B=&DWP(8,"esp");
+$T=&DWP(12,"esp");
+$M=&DWP(16,"esp");
+$scratch=&DWP(20,"esp");
+$rp=&DWP(24,"esp");			# these are mine
+$sp=&DWP(28,"esp");
+# &DWP(32,"esp")			# 32 byte scratch area
+# &DWP(64+(4*$num+$pad)*0,"esp")	# padded tp[num]
+# &DWP(64+(4*$num+$pad)*1,"esp")	# padded copy of ap[num]
+# &DWP(64+(4*$num+$pad)*2,"esp")	# padded copy of bp[num]
+# &DWP(64+(4*$num+$pad)*3,"esp")	# padded copy of np[num]
+# Note that SDK suggests to unconditionally allocate 2K per vector. This
+# has quite an impact on performance. It naturally depends on key length,
+# but to give an example 1024 bit private RSA key operations suffer >30%
+# penalty. I allocate only as much as actually required...
+
+&function_begin($func);
+	&xor	("eax","eax");
+	&mov	("ecx",&wparam(5));	# num
+	# meet VIA's limitations for num [note that the specification
+	# expresses them in bits, while we work with amount of 32-bit words]
+	&test	("ecx",3);
+	&jnz	(&label("leave"));	# num % 4 != 0
+	&cmp	("ecx",8);
+	&jb	(&label("leave"));	# num < 8
+	&cmp	("ecx",1024);
+	&ja	(&label("leave"));	# num > 1024
+
+	&pushf	();
+	&cld	();
+
+	&mov	("edi",&wparam(0));	# rp
+	&mov	("eax",&wparam(1));	# ap
+	&mov	("ebx",&wparam(2));	# bp
+	&mov	("edx",&wparam(3));	# np
+	&mov	("esi",&wparam(4));	# n0
+	&mov	("esi",&DWP(0,"esi"));	# *n0
+
+	&lea	("ecx",&DWP($pad,"","ecx",4));	# ecx becomes vector size in bytes
+	&lea	("ebp",&DWP(64,"","ecx",4));	# allocate 4 vectors + 64 bytes
+	&neg	("ebp");
+	&add	("ebp","esp");
+	&and	("ebp",-64);		# align to cache-line
+	&xchg	("ebp","esp");		# alloca
+
+	&mov	($rp,"edi");		# save rp
+	&mov	($sp,"ebp");		# save esp
+
+	&mov	($mZeroPrime,"esi");
+	&lea	("esi",&DWP(64,"esp"));	# tp
+	&mov	($T,"esi");
+	&lea	("edi",&DWP(32,"esp"));	# scratch area
+	&mov	($scratch,"edi");
+	&mov	("esi","eax");
+
+	&lea	("ebp",&DWP(-$pad,"ecx"));
+	&shr	("ebp",2);		# restore original num value in ebp
+
+	&xor	("eax","eax");
+
+	&mov	("ecx","ebp");
+	&lea	("ecx",&DWP((32+$pad)/4,"ecx"));# padded tp + scratch
+	&data_byte(0xf3,0xab);		# rep stosl, bzero
+
+	&mov	("ecx","ebp");
+	&lea	("edi",&DWP(64+$pad,"esp","ecx",4));# pointer to ap copy
+	&mov	($A,"edi");
+	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
+	&mov	("ecx",$pad/4);
+	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
+	# edi points at the end of padded ap copy...
+
+	&mov	("ecx","ebp");
+	&mov	("esi","ebx");
+	&mov	($B,"edi");
+	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
+	&mov	("ecx",$pad/4);
+	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
+	# edi points at the end of padded bp copy...
+
+	&mov	("ecx","ebp");
+	&mov	("esi","edx");
+	&mov	($M,"edi");
+	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
+	&mov	("ecx",$pad/4);
+	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
+	# edi points at the end of padded np copy...
+
+	# let magic happen...
+	&mov	("ecx","ebp");
+	&mov	("esi","esp");
+	&shl	("ecx",5);		# convert word counter to bit counter
+	&align	(4);
+	&data_byte(0xf3,0x0f,0xa6,0xc0);# rep montmul
+
+	&mov	("ecx","ebp");
+	&lea	("esi",&DWP(64,"esp"));		# tp
+	# edi still points at the end of padded np copy...
+	&neg	("ebp");
+	&lea	("ebp",&DWP(-$pad,"edi","ebp",4));	# so just "rewind"
+	&mov	("edi",$rp);			# restore rp
+	&xor	("edx","edx");			# i=0 and clear CF
+
+&set_label("sub",8);
+	&mov	("eax",&DWP(0,"esi","edx",4));
+	&sbb	("eax",&DWP(0,"ebp","edx",4));
+	&mov	(&DWP(0,"edi","edx",4),"eax");	# rp[i]=tp[i]-np[i]
+	&lea	("edx",&DWP(1,"edx"));		# i++
+	&loop	(&label("sub"));		# doesn't affect CF!
+
+	&mov	("eax",&DWP(0,"esi","edx",4));	# upmost overflow bit
+	&sbb	("eax",0);
+	&and	("esi","eax");
+	&not	("eax");
+	&mov	("ebp","edi");
+	&and	("ebp","eax");
+	&or	("esi","ebp");			# tp=carry?tp:rp
+
+	&mov	("ecx","edx");			# num
+	&xor	("edx","edx");			# i=0
+
+&set_label("copy",8);
+	&mov	("eax",&DWP(0,"esi","edx",4));
+	&mov	(&DWP(64,"esp","edx",4),"ecx");	# zap tp
+	&mov	(&DWP(0,"edi","edx",4),"eax");
+	&lea	("edx",&DWP(1,"edx"));		# i++
+	&loop	(&label("copy"));
+
+	&mov	("ebp",$sp);
+	&xor	("eax","eax");
+
+	&mov	("ecx",64/4);
+	&mov	("edi","esp");		# zap frame including scratch area
+	&data_byte(0xf3,0xab);		# rep stosl, bzero
+
+	# zap copies of ap, bp and np
+	&lea	("edi",&DWP(64+$pad,"esp","edx",4));# pointer to ap
+	&lea	("ecx",&DWP(3*$pad/4,"edx","edx",2));
+	&data_byte(0xf3,0xab);		# rep stosl, bzero
+
+	&mov	("esp","ebp");
+	&inc	("eax");		# signal "done"
+	&popf	();
+&set_label("leave");
+&function_end($func);
+
+&asciz("Padlock Montgomery Multiplication, CRYPTOGAMS by <appro\@openssl.org>");
+
+&asm_finish();
diff --git a/app/openssl/crypto/bn/asm/x86-mont.pl b/app/openssl/crypto/bn/asm/x86-mont.pl
new file mode 100755
index 00000000..5cd3cd2e
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86-mont.pl
@@ -0,0 +1,591 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# October 2005
+#
+# This is a "teaser" code, as it can be improved in several ways...
+# First of all non-SSE2 path should be implemented (yes, for now it
+# performs Montgomery multiplication/convolution only on SSE2-capable
+# CPUs such as P4, others fall down to original code). Then inner loop
+# can be unrolled and modulo-scheduled to improve ILP and possibly
+# moved to 128-bit XMM register bank (though it would require input
+# rearrangement and/or increase bus bandwidth utilization). Dedicated
+# squaring procedure should give further performance improvement...
+# Yet, for being draft, the code improves rsa512 *sign* benchmark by
+# 110%(!), rsa1024 one - by 70% and rsa4096 - by 20%:-)
+
+# December 2006
+#
+# Modulo-scheduling SSE2 loops results in further 15-20% improvement.
+# Integer-only code [being equipped with dedicated squaring procedure]
+# gives ~40% on rsa512 sign benchmark...
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+$sse2=0;
+for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
+
+&external_label("OPENSSL_ia32cap_P") if ($sse2);
+
+&function_begin("bn_mul_mont");
+
+$i="edx";
+$j="ecx";
+$ap="esi";	$tp="esi";		# overlapping variables!!!
+$rp="edi";	$bp="edi";		# overlapping variables!!!
+$np="ebp";
+$num="ebx";
+
+$_num=&DWP(4*0,"esp");			# stack top layout
+$_rp=&DWP(4*1,"esp");
+$_ap=&DWP(4*2,"esp");
+$_bp=&DWP(4*3,"esp");
+$_np=&DWP(4*4,"esp");
+$_n0=&DWP(4*5,"esp");	$_n0q=&QWP(4*5,"esp");
+$_sp=&DWP(4*6,"esp");
+$_bpend=&DWP(4*7,"esp");
+$frame=32;				# size of above frame rounded up to 16n
+
+	&xor	("eax","eax");
+	&mov	("edi",&wparam(5));	# int num
+	&cmp	("edi",4);
+	&jl	(&label("just_leave"));
+
+	&lea	("esi",&wparam(0));	# put aside pointer to argument block
+	&lea	("edx",&wparam(1));	# load ap
+	&mov	("ebp","esp");		# saved stack pointer!
+	&add	("edi",2);		# extra two words on top of tp
+	&neg	("edi");
+	&lea	("esp",&DWP(-$frame,"esp","edi",4));	# alloca($frame+4*(num+2))
+	&neg	("edi");
+
+	# minimize cache contention by arraning 2K window between stack
+	# pointer and ap argument [np is also position sensitive vector,
+	# but it's assumed to be near ap, as it's allocated at ~same
+	# time].
+	&mov	("eax","esp");
+	&sub	("eax","edx");
+	&and	("eax",2047);
+	&sub	("esp","eax");		# this aligns sp and ap modulo 2048
+
+	&xor	("edx","esp");
+	&and	("edx",2048);
+	&xor	("edx",2048);
+	&sub	("esp","edx");		# this splits them apart modulo 4096
+
+	&and	("esp",-64);		# align to cache line
+
+	################################# load argument block...
+	&mov	("eax",&DWP(0*4,"esi"));# BN_ULONG *rp
+	&mov	("ebx",&DWP(1*4,"esi"));# const BN_ULONG *ap
+	&mov	("ecx",&DWP(2*4,"esi"));# const BN_ULONG *bp
+	&mov	("edx",&DWP(3*4,"esi"));# const BN_ULONG *np
+	&mov	("esi",&DWP(4*4,"esi"));# const BN_ULONG *n0
+	#&mov	("edi",&DWP(5*4,"esi"));# int num
+
+	&mov	("esi",&DWP(0,"esi"));	# pull n0[0]
+	&mov	($_rp,"eax");		# ... save a copy of argument block
+	&mov	($_ap,"ebx");
+	&mov	($_bp,"ecx");
+	&mov	($_np,"edx");
+	&mov	($_n0,"esi");
+	&lea	($num,&DWP(-3,"edi"));	# num=num-1 to assist modulo-scheduling
+	#&mov	($_num,$num);		# redundant as $num is not reused
+	&mov	($_sp,"ebp");		# saved stack pointer!
+
+if($sse2) {
+$acc0="mm0";	# mmx register bank layout
+$acc1="mm1";
+$car0="mm2";
+$car1="mm3";
+$mul0="mm4";
+$mul1="mm5";
+$temp="mm6";
+$mask="mm7";
+
+	&picmeup("eax","OPENSSL_ia32cap_P");
+	&bt	(&DWP(0,"eax"),26);
+	&jnc	(&label("non_sse2"));
+
+	&mov	("eax",-1);
+	&movd	($mask,"eax");		# mask 32 lower bits
+
+	&mov	($ap,$_ap);		# load input pointers
+	&mov	($bp,$_bp);
+	&mov	($np,$_np);
+
+	&xor	($i,$i);		# i=0
+	&xor	($j,$j);		# j=0
+
+	&movd	($mul0,&DWP(0,$bp));		# bp[0]
+	&movd	($mul1,&DWP(0,$ap));		# ap[0]
+	&movd	($car1,&DWP(0,$np));		# np[0]
+
+	&pmuludq($mul1,$mul0);			# ap[0]*bp[0]
+	&movq	($car0,$mul1);
+	&movq	($acc0,$mul1);			# I wish movd worked for
+	&pand	($acc0,$mask);			# inter-register transfers
+
+	&pmuludq($mul1,$_n0q);			# *=n0
+
+	&pmuludq($car1,$mul1);			# "t[0]"*np[0]*n0
+	&paddq	($car1,$acc0);
+
+	&movd	($acc1,&DWP(4,$np));		# np[1]
+	&movd	($acc0,&DWP(4,$ap));		# ap[1]
+
+	&psrlq	($car0,32);
+	&psrlq	($car1,32);
+
+	&inc	($j);				# j++
+&set_label("1st",16);
+	&pmuludq($acc0,$mul0);			# ap[j]*bp[0]
+	&pmuludq($acc1,$mul1);			# np[j]*m1
+	&paddq	($car0,$acc0);			# +=c0
+	&paddq	($car1,$acc1);			# +=c1
+
+	&movq	($acc0,$car0);
+	&pand	($acc0,$mask);
+	&movd	($acc1,&DWP(4,$np,$j,4));	# np[j+1]
+	&paddq	($car1,$acc0);			# +=ap[j]*bp[0];
+	&movd	($acc0,&DWP(4,$ap,$j,4));	# ap[j+1]
+	&psrlq	($car0,32);
+	&movd	(&DWP($frame-4,"esp",$j,4),$car1);	# tp[j-1]=
+	&psrlq	($car1,32);
+
+	&lea	($j,&DWP(1,$j));
+	&cmp	($j,$num);
+	&jl	(&label("1st"));
+
+	&pmuludq($acc0,$mul0);			# ap[num-1]*bp[0]
+	&pmuludq($acc1,$mul1);			# np[num-1]*m1
+	&paddq	($car0,$acc0);			# +=c0
+	&paddq	($car1,$acc1);			# +=c1
+
+	&movq	($acc0,$car0);
+	&pand	($acc0,$mask);
+	&paddq	($car1,$acc0);			# +=ap[num-1]*bp[0];
+	&movd	(&DWP($frame-4,"esp",$j,4),$car1);	# tp[num-2]=
+
+	&psrlq	($car0,32);
+	&psrlq	($car1,32);
+
+	&paddq	($car1,$car0);
+	&movq	(&QWP($frame,"esp",$num,4),$car1);	# tp[num].tp[num-1]
+
+	&inc	($i);				# i++
+&set_label("outer");
+	&xor	($j,$j);			# j=0
+
+	&movd	($mul0,&DWP(0,$bp,$i,4));	# bp[i]
+	&movd	($mul1,&DWP(0,$ap));		# ap[0]
+	&movd	($temp,&DWP($frame,"esp"));	# tp[0]
+	&movd	($car1,&DWP(0,$np));		# np[0]
+	&pmuludq($mul1,$mul0);			# ap[0]*bp[i]
+
+	&paddq	($mul1,$temp);			# +=tp[0]
+	&movq	($acc0,$mul1);
+	&movq	($car0,$mul1);
+	&pand	($acc0,$mask);
+
+	&pmuludq($mul1,$_n0q);			# *=n0
+
+	&pmuludq($car1,$mul1);
+	&paddq	($car1,$acc0);
+
+	&movd	($temp,&DWP($frame+4,"esp"));	# tp[1]
+	&movd	($acc1,&DWP(4,$np));		# np[1]
+	&movd	($acc0,&DWP(4,$ap));		# ap[1]
+
+	&psrlq	($car0,32);
+	&psrlq	($car1,32);
+	&paddq	($car0,$temp);			# +=tp[1]
+
+	&inc	($j);				# j++
+	&dec	($num);
+&set_label("inner");
+	&pmuludq($acc0,$mul0);			# ap[j]*bp[i]
+	&pmuludq($acc1,$mul1);			# np[j]*m1
+	&paddq	($car0,$acc0);			# +=c0
+	&paddq	($car1,$acc1);			# +=c1
+
+	&movq	($acc0,$car0);
+	&movd	($temp,&DWP($frame+4,"esp",$j,4));# tp[j+1]
+	&pand	($acc0,$mask);
+	&movd	($acc1,&DWP(4,$np,$j,4));	# np[j+1]
+	&paddq	($car1,$acc0);			# +=ap[j]*bp[i]+tp[j]
+	&movd	($acc0,&DWP(4,$ap,$j,4));	# ap[j+1]
+	&psrlq	($car0,32);
+	&movd	(&DWP($frame-4,"esp",$j,4),$car1);# tp[j-1]=
+	&psrlq	($car1,32);
+	&paddq	($car0,$temp);			# +=tp[j+1]
+
+	&dec	($num);
+	&lea	($j,&DWP(1,$j));		# j++
+	&jnz	(&label("inner"));
+
+	&mov	($num,$j);
+	&pmuludq($acc0,$mul0);			# ap[num-1]*bp[i]
+	&pmuludq($acc1,$mul1);			# np[num-1]*m1
+	&paddq	($car0,$acc0);			# +=c0
+	&paddq	($car1,$acc1);			# +=c1
+
+	&movq	($acc0,$car0);
+	&pand	($acc0,$mask);
+	&paddq	($car1,$acc0);			# +=ap[num-1]*bp[i]+tp[num-1]
+	&movd	(&DWP($frame-4,"esp",$j,4),$car1);	# tp[num-2]=
+	&psrlq	($car0,32);
+	&psrlq	($car1,32);
+
+	&movd	($temp,&DWP($frame+4,"esp",$num,4));	# += tp[num]
+	&paddq	($car1,$car0);
+	&paddq	($car1,$temp);
+	&movq	(&QWP($frame,"esp",$num,4),$car1);	# tp[num].tp[num-1]
+
+	&lea	($i,&DWP(1,$i));		# i++
+	&cmp	($i,$num);
+	&jle	(&label("outer"));
+
+	&emms	();				# done with mmx bank
+	&jmp	(&label("common_tail"));
+
+&set_label("non_sse2",16);
+}
+
+if (0) {
+	&mov	("esp",$_sp);
+	&xor	("eax","eax");	# signal "not fast enough [yet]"
+	&jmp	(&label("just_leave"));
+	# While the below code provides competitive performance for
+	# all key lengthes on modern Intel cores, it's still more
+	# than 10% slower for 4096-bit key elsewhere:-( "Competitive"
+	# means compared to the original integer-only assembler.
+	# 512-bit RSA sign is better by ~40%, but that's about all
+	# one can say about all CPUs...
+} else {
+$inp="esi";	# integer path uses these registers differently
+$word="edi";
+$carry="ebp";
+
+	&mov	($inp,$_ap);
+	&lea	($carry,&DWP(1,$num));
+	&mov	($word,$_bp);
+	&xor	($j,$j);				# j=0
+	&mov	("edx",$inp);
+	&and	($carry,1);				# see if num is even
+	&sub	("edx",$word);				# see if ap==bp
+	&lea	("eax",&DWP(4,$word,$num,4));		# &bp[num]
+	&or	($carry,"edx");
+	&mov	($word,&DWP(0,$word));			# bp[0]
+	&jz	(&label("bn_sqr_mont"));
+	&mov	($_bpend,"eax");
+	&mov	("eax",&DWP(0,$inp));
+	&xor	("edx","edx");
+
+&set_label("mull",16);
+	&mov	($carry,"edx");
+	&mul	($word);				# ap[j]*bp[0]
+	&add	($carry,"eax");
+	&lea	($j,&DWP(1,$j));
+	&adc	("edx",0);
+	&mov	("eax",&DWP(0,$inp,$j,4));		# ap[j+1]
+	&cmp	($j,$num);
+	&mov	(&DWP($frame-4,"esp",$j,4),$carry);	# tp[j]=
+	&jl	(&label("mull"));
+
+	&mov	($carry,"edx");
+	&mul	($word);				# ap[num-1]*bp[0]
+	 &mov	($word,$_n0);
+	&add	("eax",$carry);
+	 &mov	($inp,$_np);
+	&adc	("edx",0);
+	 &imul	($word,&DWP($frame,"esp"));		# n0*tp[0]
+
+	&mov	(&DWP($frame,"esp",$num,4),"eax");	# tp[num-1]=
+	&xor	($j,$j);
+	&mov	(&DWP($frame+4,"esp",$num,4),"edx");	# tp[num]=
+	&mov	(&DWP($frame+8,"esp",$num,4),$j);	# tp[num+1]=
+
+	&mov	("eax",&DWP(0,$inp));			# np[0]
+	&mul	($word);				# np[0]*m
+	&add	("eax",&DWP($frame,"esp"));		# +=tp[0]
+	&mov	("eax",&DWP(4,$inp));			# np[1]
+	&adc	("edx",0);
+	&inc	($j);
+
+	&jmp	(&label("2ndmadd"));
+
+&set_label("1stmadd",16);
+	&mov	($carry,"edx");
+	&mul	($word);				# ap[j]*bp[i]
+	&add	($carry,&DWP($frame,"esp",$j,4));	# +=tp[j]
+	&lea	($j,&DWP(1,$j));
+	&adc	("edx",0);
+	&add	($carry,"eax");
+	&mov	("eax",&DWP(0,$inp,$j,4));		# ap[j+1]
+	&adc	("edx",0);
+	&cmp	($j,$num);
+	&mov	(&DWP($frame-4,"esp",$j,4),$carry);	# tp[j]=
+	&jl	(&label("1stmadd"));
+
+	&mov	($carry,"edx");
+	&mul	($word);				# ap[num-1]*bp[i]
+	&add	("eax",&DWP($frame,"esp",$num,4));	# +=tp[num-1]
+	 &mov	($word,$_n0);
+	&adc	("edx",0);
+	 &mov	($inp,$_np);
+	&add	($carry,"eax");
+	&adc	("edx",0);
+	 &imul	($word,&DWP($frame,"esp"));		# n0*tp[0]
+
+	&xor	($j,$j);
+	&add	("edx",&DWP($frame+4,"esp",$num,4));	# carry+=tp[num]
+	&mov	(&DWP($frame,"esp",$num,4),$carry);	# tp[num-1]=
+	&adc	($j,0);
+	 &mov	("eax",&DWP(0,$inp));			# np[0]
+	&mov	(&DWP($frame+4,"esp",$num,4),"edx");	# tp[num]=
+	&mov	(&DWP($frame+8,"esp",$num,4),$j);	# tp[num+1]=
+
+	&mul	($word);				# np[0]*m
+	&add	("eax",&DWP($frame,"esp"));		# +=tp[0]
+	&mov	("eax",&DWP(4,$inp));			# np[1]
+	&adc	("edx",0);
+	&mov	($j,1);
+
+&set_label("2ndmadd",16);
+	&mov	($carry,"edx");
+	&mul	($word);				# np[j]*m
+	&add	($carry,&DWP($frame,"esp",$j,4));	# +=tp[j]
+	&lea	($j,&DWP(1,$j));
+	&adc	("edx",0);
+	&add	($carry,"eax");
+	&mov	("eax",&DWP(0,$inp,$j,4));		# np[j+1]
+	&adc	("edx",0);
+	&cmp	($j,$num);
+	&mov	(&DWP($frame-8,"esp",$j,4),$carry);	# tp[j-1]=
+	&jl	(&label("2ndmadd"));
+
+	&mov	($carry,"edx");
+	&mul	($word);				# np[j]*m
+	&add	($carry,&DWP($frame,"esp",$num,4));	# +=tp[num-1]
+	&adc	("edx",0);
+	&add	($carry,"eax");
+	&adc	("edx",0);
+	&mov	(&DWP($frame-4,"esp",$num,4),$carry);	# tp[num-2]=
+
+	&xor	("eax","eax");
+	 &mov	($j,$_bp);				# &bp[i]
+	&add	("edx",&DWP($frame+4,"esp",$num,4));	# carry+=tp[num]
+	&adc	("eax",&DWP($frame+8,"esp",$num,4));	# +=tp[num+1]
+	 &lea	($j,&DWP(4,$j));
+	&mov	(&DWP($frame,"esp",$num,4),"edx");	# tp[num-1]=
+	 &cmp	($j,$_bpend);
+	&mov	(&DWP($frame+4,"esp",$num,4),"eax");	# tp[num]=
+	&je	(&label("common_tail"));
+
+	&mov	($word,&DWP(0,$j));			# bp[i+1]
+	&mov	($inp,$_ap);
+	&mov	($_bp,$j);				# &bp[++i]
+	&xor	($j,$j);
+	&xor	("edx","edx");
+	&mov	("eax",&DWP(0,$inp));
+	&jmp	(&label("1stmadd"));
+
+&set_label("bn_sqr_mont",16);
+$sbit=$num;
+	&mov	($_num,$num);
+	&mov	($_bp,$j);				# i=0
+
+	&mov	("eax",$word);				# ap[0]
+	&mul	($word);				# ap[0]*ap[0]
+	&mov	(&DWP($frame,"esp"),"eax");		# tp[0]=
+	&mov	($sbit,"edx");
+	&shr	("edx",1);
+	&and	($sbit,1);
+	&inc	($j);
+&set_label("sqr",16);
+	&mov	("eax",&DWP(0,$inp,$j,4));		# ap[j]
+	&mov	($carry,"edx");
+	&mul	($word);				# ap[j]*ap[0]
+	&add	("eax",$carry);
+	&lea	($j,&DWP(1,$j));
+	&adc	("edx",0);
+	&lea	($carry,&DWP(0,$sbit,"eax",2));
+	&shr	("eax",31);
+	&cmp	($j,$_num);
+	&mov	($sbit,"eax");
+	&mov	(&DWP($frame-4,"esp",$j,4),$carry);	# tp[j]=
+	&jl	(&label("sqr"));
+
+	&mov	("eax",&DWP(0,$inp,$j,4));		# ap[num-1]
+	&mov	($carry,"edx");
+	&mul	($word);				# ap[num-1]*ap[0]
+	&add	("eax",$carry);
+	 &mov	($word,$_n0);
+	&adc	("edx",0);
+	 &mov	($inp,$_np);
+	&lea	($carry,&DWP(0,$sbit,"eax",2));
+	 &imul	($word,&DWP($frame,"esp"));		# n0*tp[0]
+	&shr	("eax",31);
+	&mov	(&DWP($frame,"esp",$j,4),$carry);	# tp[num-1]=
+
+	&lea	($carry,&DWP(0,"eax","edx",2));
+	 &mov	("eax",&DWP(0,$inp));			# np[0]
+	&shr	("edx",31);
+	&mov	(&DWP($frame+4,"esp",$j,4),$carry);	# tp[num]=
+	&mov	(&DWP($frame+8,"esp",$j,4),"edx");	# tp[num+1]=
+
+	&mul	($word);				# np[0]*m
+	&add	("eax",&DWP($frame,"esp"));		# +=tp[0]
+	&mov	($num,$j);
+	&adc	("edx",0);
+	&mov	("eax",&DWP(4,$inp));			# np[1]
+	&mov	($j,1);
+
+&set_label("3rdmadd",16);
+	&mov	($carry,"edx");
+	&mul	($word);				# np[j]*m
+	&add	($carry,&DWP($frame,"esp",$j,4));	# +=tp[j]
+	&adc	("edx",0);
+	&add	($carry,"eax");
+	&mov	("eax",&DWP(4,$inp,$j,4));		# np[j+1]
+	&adc	("edx",0);
+	&mov	(&DWP($frame-4,"esp",$j,4),$carry);	# tp[j-1]=
+
+	&mov	($carry,"edx");
+	&mul	($word);				# np[j+1]*m
+	&add	($carry,&DWP($frame+4,"esp",$j,4));	# +=tp[j+1]
+	&lea	($j,&DWP(2,$j));
+	&adc	("edx",0);
+	&add	($carry,"eax");
+	&mov	("eax",&DWP(0,$inp,$j,4));		# np[j+2]
+	&adc	("edx",0);
+	&cmp	($j,$num);
+	&mov	(&DWP($frame-8,"esp",$j,4),$carry);	# tp[j]=
+	&jl	(&label("3rdmadd"));
+
+	&mov	($carry,"edx");
+	&mul	($word);				# np[j]*m
+	&add	($carry,&DWP($frame,"esp",$num,4));	# +=tp[num-1]
+	&adc	("edx",0);
+	&add	($carry,"eax");
+	&adc	("edx",0);
+	&mov	(&DWP($frame-4,"esp",$num,4),$carry);	# tp[num-2]=
+
+	&mov	($j,$_bp);				# i
+	&xor	("eax","eax");
+	&mov	($inp,$_ap);
+	&add	("edx",&DWP($frame+4,"esp",$num,4));	# carry+=tp[num]
+	&adc	("eax",&DWP($frame+8,"esp",$num,4));	# +=tp[num+1]
+	&mov	(&DWP($frame,"esp",$num,4),"edx");	# tp[num-1]=
+	&cmp	($j,$num);
+	&mov	(&DWP($frame+4,"esp",$num,4),"eax");	# tp[num]=
+	&je	(&label("common_tail"));
+
+	&mov	($word,&DWP(4,$inp,$j,4));		# ap[i]
+	&lea	($j,&DWP(1,$j));
+	&mov	("eax",$word);
+	&mov	($_bp,$j);				# ++i
+	&mul	($word);				# ap[i]*ap[i]
+	&add	("eax",&DWP($frame,"esp",$j,4));	# +=tp[i]
+	&adc	("edx",0);
+	&mov	(&DWP($frame,"esp",$j,4),"eax");	# tp[i]=
+	&xor	($carry,$carry);
+	&cmp	($j,$num);
+	&lea	($j,&DWP(1,$j));
+	&je	(&label("sqrlast"));
+
+	&mov	($sbit,"edx");				# zaps $num
+	&shr	("edx",1);
+	&and	($sbit,1);
+&set_label("sqradd",16);
+	&mov	("eax",&DWP(0,$inp,$j,4));		# ap[j]
+	&mov	($carry,"edx");
+	&mul	($word);				# ap[j]*ap[i]
+	&add	("eax",$carry);
+	&lea	($carry,&DWP(0,"eax","eax"));
+	&adc	("edx",0);
+	&shr	("eax",31);
+	&add	($carry,&DWP($frame,"esp",$j,4));	# +=tp[j]
+	&lea	($j,&DWP(1,$j));
+	&adc	("eax",0);
+	&add	($carry,$sbit);
+	&adc	("eax",0);
+	&cmp	($j,$_num);
+	&mov	(&DWP($frame-4,"esp",$j,4),$carry);	# tp[j]=
+	&mov	($sbit,"eax");
+	&jle	(&label("sqradd"));
+
+	&mov	($carry,"edx");
+	&lea	("edx",&DWP(0,$sbit,"edx",2));
+	&shr	($carry,31);
+&set_label("sqrlast");
+	&mov	($word,$_n0);
+	&mov	($inp,$_np);
+	&imul	($word,&DWP($frame,"esp"));		# n0*tp[0]
+
+	&add	("edx",&DWP($frame,"esp",$j,4));	# +=tp[num]
+	&mov	("eax",&DWP(0,$inp));			# np[0]
+	&adc	($carry,0);
+	&mov	(&DWP($frame,"esp",$j,4),"edx");	# tp[num]=
+	&mov	(&DWP($frame+4,"esp",$j,4),$carry);	# tp[num+1]=
+
+	&mul	($word);				# np[0]*m
+	&add	("eax",&DWP($frame,"esp"));		# +=tp[0]
+	&lea	($num,&DWP(-1,$j));
+	&adc	("edx",0);
+	&mov	($j,1);
+	&mov	("eax",&DWP(4,$inp));			# np[1]
+
+	&jmp	(&label("3rdmadd"));
+}
+
+&set_label("common_tail",16);
+	&mov	($np,$_np);			# load modulus pointer
+	&mov	($rp,$_rp);			# load result pointer
+	&lea	($tp,&DWP($frame,"esp"));	# [$ap and $bp are zapped]
+
+	&mov	("eax",&DWP(0,$tp));		# tp[0]
+	&mov	($j,$num);			# j=num-1
+	&xor	($i,$i);			# i=0 and clear CF!
+
+&set_label("sub",16);
+	&sbb	("eax",&DWP(0,$np,$i,4));
+	&mov	(&DWP(0,$rp,$i,4),"eax");	# rp[i]=tp[i]-np[i]
+	&dec	($j);				# doesn't affect CF!
+	&mov	("eax",&DWP(4,$tp,$i,4));	# tp[i+1]
+	&lea	($i,&DWP(1,$i));		# i++
+	&jge	(&label("sub"));
+
+	&sbb	("eax",0);			# handle upmost overflow bit
+	&and	($tp,"eax");
+	&not	("eax");
+	&mov	($np,$rp);
+	&and	($np,"eax");
+	&or	($tp,$np);			# tp=carry?tp:rp
+
+&set_label("copy",16);				# copy or in-place refresh
+	&mov	("eax",&DWP(0,$tp,$num,4));
+	&mov	(&DWP(0,$rp,$num,4),"eax");	# rp[i]=tp[i]
+	&mov	(&DWP($frame,"esp",$num,4),$j);	# zap temporary vector
+	&dec	($num);
+	&jge	(&label("copy"));
+
+	&mov	("esp",$_sp);		# pull saved stack pointer
+	&mov	("eax",1);
+&set_label("just_leave");
+&function_end("bn_mul_mont");
+
+&asciz("Montgomery Multiplication for x86, CRYPTOGAMS by <appro\@openssl.org>");
+
+&asm_finish();
diff --git a/app/openssl/crypto/bn/asm/x86.pl b/app/openssl/crypto/bn/asm/x86.pl
new file mode 100644
index 00000000..1bc4f1bb
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86.pl
@@ -0,0 +1,28 @@
+#!/usr/local/bin/perl
+
+push(@INC,"perlasm","../../perlasm");
+require "x86asm.pl";
+
+require("x86/mul_add.pl");
+require("x86/mul.pl");
+require("x86/sqr.pl");
+require("x86/div.pl");
+require("x86/add.pl");
+require("x86/sub.pl");
+require("x86/comba.pl");
+
+&asm_init($ARGV[0],$0);
+
+&bn_mul_add_words("bn_mul_add_words");
+&bn_mul_words("bn_mul_words");
+&bn_sqr_words("bn_sqr_words");
+&bn_div_words("bn_div_words");
+&bn_add_words("bn_add_words");
+&bn_sub_words("bn_sub_words");
+&bn_mul_comba("bn_mul_comba8",8);
+&bn_mul_comba("bn_mul_comba4",4);
+&bn_sqr_comba("bn_sqr_comba8",8);
+&bn_sqr_comba("bn_sqr_comba4",4);
+
+&asm_finish();
+
diff --git a/app/openssl/crypto/bn/asm/x86/add.pl b/app/openssl/crypto/bn/asm/x86/add.pl
new file mode 100644
index 00000000..0b5cf583
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/add.pl
@@ -0,0 +1,76 @@
+#!/usr/local/bin/perl
+# x86 assember
+
+sub bn_add_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$a="esi";
+	$b="edi";
+	$c="eax";
+	$r="ebx";
+	$tmp1="ecx";
+	$tmp2="edx";
+	$num="ebp";
+
+	&mov($r,&wparam(0));	# get r
+	 &mov($a,&wparam(1));	# get a
+	&mov($b,&wparam(2));	# get b
+	 &mov($num,&wparam(3));	# get num
+	&xor($c,$c);		# clear carry
+	 &and($num,0xfffffff8);	# num / 8
+
+	&jz(&label("aw_finish"));
+
+	&set_label("aw_loop",0);
+	for ($i=0; $i<8; $i++)
+		{
+		&comment("Round $i");
+
+		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
+		&add($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &add($tmp1,$tmp2);
+		&adc($c,0);
+		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
+		}
+
+	&comment("");
+	&add($a,32);
+	 &add($b,32);
+	&add($r,32);
+	 &sub($num,8);
+	&jnz(&label("aw_loop"));
+
+	&set_label("aw_finish",0);
+	&mov($num,&wparam(3));	# get num
+	&and($num,7);
+	 &jz(&label("aw_end"));
+
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
+		&add($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &add($tmp1,$tmp2);
+		&adc($c,0);
+		 &dec($num) if ($i != 6);
+		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *a
+		 &jz(&label("aw_end")) if ($i != 6);
+		}
+	&set_label("aw_end",0);
+
+#	&mov("eax",$c);		# $c is "eax"
+
+	&function_end($name);
+	}
+
+1;
diff --git a/app/openssl/crypto/bn/asm/x86/comba.pl b/app/openssl/crypto/bn/asm/x86/comba.pl
new file mode 100644
index 00000000..22912536
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/comba.pl
@@ -0,0 +1,277 @@
+#!/usr/local/bin/perl
+# x86 assember
+
+sub mul_add_c
+	{
+	local($a,$ai,$b,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
+
+	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
+	# words, and 1 if load return value
+
+	&comment("mul a[$ai]*b[$bi]");
+
+	# "eax" and "edx" will always be pre-loaded.
+	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
+	# &mov("edx",&DWP($bi*4,$b,"",0));
+
+	&mul("edx");
+	&add($c0,"eax");
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# laod next a
+	 &mov("eax",&wparam(0)) if $pos > 0;			# load r[]
+	 ###
+	&adc($c1,"edx");
+	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 0;	# laod next b
+	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 1;	# laod next b
+	 ###
+	&adc($c2,0);
+	 # is pos > 1, it means it is the last loop 
+	 &mov(&DWP($i*4,"eax","",0),$c0) if $pos > 0;		# save r[];
+	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# laod next a
+	}
+
+sub sqr_add_c
+	{
+	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
+
+	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
+	# words, and 1 if load return value
+
+	&comment("sqr a[$ai]*a[$bi]");
+
+	# "eax" and "edx" will always be pre-loaded.
+	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
+	# &mov("edx",&DWP($bi*4,$b,"",0));
+
+	if ($ai == $bi)
+		{ &mul("eax");}
+	else
+		{ &mul("edx");}
+	&add($c0,"eax");
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
+	 ###
+	&adc($c1,"edx");
+	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos == 1) && ($na != $nb);
+	 ###
+	&adc($c2,0);
+	 # is pos > 1, it means it is the last loop 
+	 &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
+	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# load next b
+	}
+
+sub sqr_add_c2
+	{
+	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
+
+	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
+	# words, and 1 if load return value
+
+	&comment("sqr a[$ai]*a[$bi]");
+
+	# "eax" and "edx" will always be pre-loaded.
+	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
+	# &mov("edx",&DWP($bi*4,$a,"",0));
+
+	if ($ai == $bi)
+		{ &mul("eax");}
+	else
+		{ &mul("edx");}
+	&add("eax","eax");
+	 ###
+	&adc("edx","edx");
+	 ###
+	&adc($c2,0);
+	 &add($c0,"eax");
+	&adc($c1,"edx");
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
+	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;	# load next b
+	&adc($c2,0);
+	&mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
+	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos <= 1) && ($na != $nb);
+	 ###
+	}
+
+sub bn_mul_comba
+	{
+	local($name,$num)=@_;
+	local($a,$b,$c0,$c1,$c2);
+	local($i,$as,$ae,$bs,$be,$ai,$bi);
+	local($tot,$end);
+
+	&function_begin_B($name,"");
+
+	$c0="ebx";
+	$c1="ecx";
+	$c2="ebp";
+	$a="esi";
+	$b="edi";
+	
+	$as=0;
+	$ae=0;
+	$bs=0;
+	$be=0;
+	$tot=$num+$num-1;
+
+	&push("esi");
+	 &mov($a,&wparam(1));
+	&push("edi");
+	 &mov($b,&wparam(2));
+	&push("ebp");
+	 &push("ebx");
+
+	&xor($c0,$c0);
+	 &mov("eax",&DWP(0,$a,"",0));	# load the first word 
+	&xor($c1,$c1);
+	 &mov("edx",&DWP(0,$b,"",0));	# load the first second 
+
+	for ($i=0; $i<$tot; $i++)
+		{
+		$ai=$as;
+		$bi=$bs;
+		$end=$be+1;
+
+		&comment("################## Calculate word $i"); 
+
+		for ($j=$bs; $j<$end; $j++)
+			{
+			&xor($c2,$c2) if ($j == $bs);
+			if (($j+1) == $end)
+				{
+				$v=1;
+				$v=2 if (($i+1) == $tot);
+				}
+			else
+				{ $v=0; }
+			if (($j+1) != $end)
+				{
+				$na=($ai-1);
+				$nb=($bi+1);
+				}
+			else
+				{
+				$na=$as+($i < ($num-1));
+				$nb=$bs+($i >= ($num-1));
+				}
+#printf STDERR "[$ai,$bi] -> [$na,$nb]\n";
+			&mul_add_c($a,$ai,$b,$bi,$c0,$c1,$c2,$v,$i,$na,$nb);
+			if ($v)
+				{
+				&comment("saved r[$i]");
+				# &mov("eax",&wparam(0));
+				# &mov(&DWP($i*4,"eax","",0),$c0);
+				($c0,$c1,$c2)=($c1,$c2,$c0);
+				}
+			$ai--;
+			$bi++;
+			}
+		$as++ if ($i < ($num-1));
+		$ae++ if ($i >= ($num-1));
+
+		$bs++ if ($i >= ($num-1));
+		$be++ if ($i < ($num-1));
+		}
+	&comment("save r[$i]");
+	# &mov("eax",&wparam(0));
+	&mov(&DWP($i*4,"eax","",0),$c0);
+
+	&pop("ebx");
+	&pop("ebp");
+	&pop("edi");
+	&pop("esi");
+	&ret();
+	&function_end_B($name);
+	}
+
+sub bn_sqr_comba
+	{
+	local($name,$num)=@_;
+	local($r,$a,$c0,$c1,$c2)=@_;
+	local($i,$as,$ae,$bs,$be,$ai,$bi);
+	local($b,$tot,$end,$half);
+
+	&function_begin_B($name,"");
+
+	$c0="ebx";
+	$c1="ecx";
+	$c2="ebp";
+	$a="esi";
+	$r="edi";
+
+	&push("esi");
+	 &push("edi");
+	&push("ebp");
+	 &push("ebx");
+	&mov($r,&wparam(0));
+	 &mov($a,&wparam(1));
+	&xor($c0,$c0);
+	 &xor($c1,$c1);
+	&mov("eax",&DWP(0,$a,"",0)); # load the first word
+
+	$as=0;
+	$ae=0;
+	$bs=0;
+	$be=0;
+	$tot=$num+$num-1;
+
+	for ($i=0; $i<$tot; $i++)
+		{
+		$ai=$as;
+		$bi=$bs;
+		$end=$be+1;
+
+		&comment("############### Calculate word $i");
+		for ($j=$bs; $j<$end; $j++)
+			{
+			&xor($c2,$c2) if ($j == $bs);
+			if (($ai-1) < ($bi+1))
+				{
+				$v=1;
+				$v=2 if ($i+1) == $tot;
+				}
+			else
+				{ $v=0; }
+			if (!$v)
+				{
+				$na=$ai-1;
+				$nb=$bi+1;
+				}
+			else
+				{
+				$na=$as+($i < ($num-1));
+				$nb=$bs+($i >= ($num-1));
+				}
+			if ($ai == $bi)
+				{
+				&sqr_add_c($r,$a,$ai,$bi,
+					$c0,$c1,$c2,$v,$i,$na,$nb);
+				}
+			else
+				{
+				&sqr_add_c2($r,$a,$ai,$bi,
+					$c0,$c1,$c2,$v,$i,$na,$nb);
+				}
+			if ($v)
+				{
+				&comment("saved r[$i]");
+				#&mov(&DWP($i*4,$r,"",0),$c0);
+				($c0,$c1,$c2)=($c1,$c2,$c0);
+				last;
+				}
+			$ai--;
+			$bi++;
+			}
+		$as++ if ($i < ($num-1));
+		$ae++ if ($i >= ($num-1));
+
+		$bs++ if ($i >= ($num-1));
+		$be++ if ($i < ($num-1));
+		}
+	&mov(&DWP($i*4,$r,"",0),$c0);
+	&pop("ebx");
+	&pop("ebp");
+	&pop("edi");
+	&pop("esi");
+	&ret();
+	&function_end_B($name);
+	}
+
+1;
diff --git a/app/openssl/crypto/bn/asm/x86/div.pl b/app/openssl/crypto/bn/asm/x86/div.pl
new file mode 100644
index 00000000..0e90152c
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/div.pl
@@ -0,0 +1,15 @@
+#!/usr/local/bin/perl
+# x86 assember
+
+sub bn_div_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+	&mov("edx",&wparam(0));	#
+	&mov("eax",&wparam(1));	#
+	&mov("ebx",&wparam(2));	#
+	&div("ebx");
+	&function_end($name);
+	}
+1;
diff --git a/app/openssl/crypto/bn/asm/x86/f b/app/openssl/crypto/bn/asm/x86/f
new file mode 100644
index 00000000..22e41122
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/f
@@ -0,0 +1,3 @@
+#!/usr/local/bin/perl
+# x86 assember
+
diff --git a/app/openssl/crypto/bn/asm/x86/mul.pl b/app/openssl/crypto/bn/asm/x86/mul.pl
new file mode 100644
index 00000000..674cb9b0
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/mul.pl
@@ -0,0 +1,77 @@
+#!/usr/local/bin/perl
+# x86 assember
+
+sub bn_mul_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$Low="eax";
+	$High="edx";
+	$a="ebx";
+	$w="ecx";
+	$r="edi";
+	$c="esi";
+	$num="ebp";
+
+	&xor($c,$c);		# clear carry
+	&mov($r,&wparam(0));	#
+	&mov($a,&wparam(1));	#
+	&mov($num,&wparam(2));	#
+	&mov($w,&wparam(3));	#
+
+	&and($num,0xfffffff8);	# num / 8
+	&jz(&label("mw_finish"));
+
+	&set_label("mw_loop",0);
+	for ($i=0; $i<32; $i+=4)
+		{
+		&comment("Round $i");
+
+		 &mov("eax",&DWP($i,$a,"",0)); 	# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);			# L(t)+=c
+		 # XXX
+
+		&adc("edx",0);			# H(t)+=carry
+		 &mov(&DWP($i,$r,"",0),"eax");	# *r= L(t);
+
+		&mov($c,"edx");			# c=  H(t);
+		}
+
+	&comment("");
+	&add($a,32);
+	&add($r,32);
+	&sub($num,8);
+	&jz(&label("mw_finish"));
+	&jmp(&label("mw_loop"));
+
+	&set_label("mw_finish",0);
+	&mov($num,&wparam(2));	# get num
+	&and($num,7);
+	&jnz(&label("mw_finish2"));
+	&jmp(&label("mw_end"));
+
+	&set_label("mw_finish2",1);
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		 &mov("eax",&DWP($i*4,$a,"",0));# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);			# L(t)+=c
+		 # XXX
+		&adc("edx",0);			# H(t)+=carry
+		 &mov(&DWP($i*4,$r,"",0),"eax");# *r= L(t);
+		&mov($c,"edx");			# c=  H(t);
+		 &dec($num) if ($i != 7-1);
+		&jz(&label("mw_end")) if ($i != 7-1);
+		}
+	&set_label("mw_end",0);
+	&mov("eax",$c);
+
+	&function_end($name);
+	}
+
+1;
diff --git a/app/openssl/crypto/bn/asm/x86/mul_add.pl b/app/openssl/crypto/bn/asm/x86/mul_add.pl
new file mode 100644
index 00000000..61830d3a
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/mul_add.pl
@@ -0,0 +1,87 @@
+#!/usr/local/bin/perl
+# x86 assember
+
+sub bn_mul_add_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$Low="eax";
+	$High="edx";
+	$a="ebx";
+	$w="ebp";
+	$r="edi";
+	$c="esi";
+
+	&xor($c,$c);		# clear carry
+	&mov($r,&wparam(0));	#
+
+	&mov("ecx",&wparam(2));	#
+	&mov($a,&wparam(1));	#
+
+	&and("ecx",0xfffffff8);	# num / 8
+	&mov($w,&wparam(3));	#
+
+	&push("ecx");		# Up the stack for a tmp variable
+
+	&jz(&label("maw_finish"));
+
+	&set_label("maw_loop",0);
+
+	&mov(&swtmp(0),"ecx");	#
+
+	for ($i=0; $i<32; $i+=4)
+		{
+		&comment("Round $i");
+
+		 &mov("eax",&DWP($i,$a,"",0)); 	# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);		# L(t)+= *r
+		 &mov($c,&DWP($i,$r,"",0));	# L(t)+= *r
+		&adc("edx",0);			# H(t)+=carry
+		 &add("eax",$c);		# L(t)+=c
+		&adc("edx",0);			# H(t)+=carry
+		 &mov(&DWP($i,$r,"",0),"eax");	# *r= L(t);
+		&mov($c,"edx");			# c=  H(t);
+		}
+
+	&comment("");
+	&mov("ecx",&swtmp(0));	#
+	&add($a,32);
+	&add($r,32);
+	&sub("ecx",8);
+	&jnz(&label("maw_loop"));
+
+	&set_label("maw_finish",0);
+	&mov("ecx",&wparam(2));	# get num
+	&and("ecx",7);
+	&jnz(&label("maw_finish2"));	# helps branch prediction
+	&jmp(&label("maw_end"));
+
+	&set_label("maw_finish2",1);
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		 &mov("eax",&DWP($i*4,$a,"",0));# *a
+		&mul($w);			# *a * w
+		&add("eax",$c);			# L(t)+=c
+		 &mov($c,&DWP($i*4,$r,"",0));	# L(t)+= *r
+		&adc("edx",0);			# H(t)+=carry
+		 &add("eax",$c);
+		&adc("edx",0);			# H(t)+=carry
+		 &dec("ecx") if ($i != 7-1);
+		&mov(&DWP($i*4,$r,"",0),"eax");	# *r= L(t);
+		 &mov($c,"edx");			# c=  H(t);
+		&jz(&label("maw_end")) if ($i != 7-1);
+		}
+	&set_label("maw_end",0);
+	&mov("eax",$c);
+
+	&pop("ecx");	# clear variable from
+
+	&function_end($name);
+	}
+
+1;
diff --git a/app/openssl/crypto/bn/asm/x86/sqr.pl b/app/openssl/crypto/bn/asm/x86/sqr.pl
new file mode 100644
index 00000000..1f90993c
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/sqr.pl
@@ -0,0 +1,60 @@
+#!/usr/local/bin/perl
+# x86 assember
+
+sub bn_sqr_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$r="esi";
+	$a="edi";
+	$num="ebx";
+
+	&mov($r,&wparam(0));	#
+	&mov($a,&wparam(1));	#
+	&mov($num,&wparam(2));	#
+
+	&and($num,0xfffffff8);	# num / 8
+	&jz(&label("sw_finish"));
+
+	&set_label("sw_loop",0);
+	for ($i=0; $i<32; $i+=4)
+		{
+		&comment("Round $i");
+		&mov("eax",&DWP($i,$a,"",0)); 	# *a
+		 # XXX
+		&mul("eax");			# *a * *a
+		&mov(&DWP($i*2,$r,"",0),"eax");	#
+		 &mov(&DWP($i*2+4,$r,"",0),"edx");#
+		}
+
+	&comment("");
+	&add($a,32);
+	&add($r,64);
+	&sub($num,8);
+	&jnz(&label("sw_loop"));
+
+	&set_label("sw_finish",0);
+	&mov($num,&wparam(2));	# get num
+	&and($num,7);
+	&jz(&label("sw_end"));
+
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		&mov("eax",&DWP($i*4,$a,"",0));	# *a
+		 # XXX
+		&mul("eax");			# *a * *a
+		&mov(&DWP($i*8,$r,"",0),"eax");	#
+		 &dec($num) if ($i != 7-1);
+		&mov(&DWP($i*8+4,$r,"",0),"edx");
+		 &jz(&label("sw_end")) if ($i != 7-1);
+		}
+	&set_label("sw_end",0);
+
+	&function_end($name);
+	}
+
+1;
diff --git a/app/openssl/crypto/bn/asm/x86/sub.pl b/app/openssl/crypto/bn/asm/x86/sub.pl
new file mode 100644
index 00000000..837b0e1b
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86/sub.pl
@@ -0,0 +1,76 @@
+#!/usr/local/bin/perl
+# x86 assember
+
+sub bn_sub_words
+	{
+	local($name)=@_;
+
+	&function_begin($name,"");
+
+	&comment("");
+	$a="esi";
+	$b="edi";
+	$c="eax";
+	$r="ebx";
+	$tmp1="ecx";
+	$tmp2="edx";
+	$num="ebp";
+
+	&mov($r,&wparam(0));	# get r
+	 &mov($a,&wparam(1));	# get a
+	&mov($b,&wparam(2));	# get b
+	 &mov($num,&wparam(3));	# get num
+	&xor($c,$c);		# clear carry
+	 &and($num,0xfffffff8);	# num / 8
+
+	&jz(&label("aw_finish"));
+
+	&set_label("aw_loop",0);
+	for ($i=0; $i<8; $i++)
+		{
+		&comment("Round $i");
+
+		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
+		&sub($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &sub($tmp1,$tmp2);
+		&adc($c,0);
+		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
+		}
+
+	&comment("");
+	&add($a,32);
+	 &add($b,32);
+	&add($r,32);
+	 &sub($num,8);
+	&jnz(&label("aw_loop"));
+
+	&set_label("aw_finish",0);
+	&mov($num,&wparam(3));	# get num
+	&and($num,7);
+	 &jz(&label("aw_end"));
+
+	for ($i=0; $i<7; $i++)
+		{
+		&comment("Tail Round $i");
+		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
+		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
+		&sub($tmp1,$c);
+		 &mov($c,0);
+		&adc($c,$c);
+		 &sub($tmp1,$tmp2);
+		&adc($c,0);
+		 &dec($num) if ($i != 6);
+		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *a
+		 &jz(&label("aw_end")) if ($i != 6);
+		}
+	&set_label("aw_end",0);
+
+#	&mov("eax",$c);		# $c is "eax"
+
+	&function_end($name);
+	}
+
+1;
diff --git a/app/openssl/crypto/bn/asm/x86_64-gcc.c b/app/openssl/crypto/bn/asm/x86_64-gcc.c
new file mode 100644
index 00000000..acb0b401
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86_64-gcc.c
@@ -0,0 +1,606 @@
+#include "../bn_lcl.h"
+#if !(defined(__GNUC__) && __GNUC__>=2)
+# include "../bn_asm.c"	/* kind of dirty hack for Sun Studio */
+#else
+/*
+ * x86_64 BIGNUM accelerator version 0.1, December 2002.
+ *
+ * Implemented by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+ * project.
+ *
+ * Rights for redistribution and usage in source and binary forms are
+ * granted according to the OpenSSL license. Warranty of any kind is
+ * disclaimed.
+ *
+ * Q. Version 0.1? It doesn't sound like Andy, he used to assign real
+ *    versions, like 1.0...
+ * A. Well, that's because this code is basically a quick-n-dirty
+ *    proof-of-concept hack. As you can see it's implemented with
+ *    inline assembler, which means that you're bound to GCC and that
+ *    there might be enough room for further improvement.
+ *
+ * Q. Why inline assembler?
+ * A. x86_64 features own ABI which I'm not familiar with. This is
+ *    why I decided to let the compiler take care of subroutine
+ *    prologue/epilogue as well as register allocation. For reference.
+ *    Win64 implements different ABI for AMD64, different from Linux.
+ *
+ * Q. How much faster does it get?
+ * A. 'apps/openssl speed rsa dsa' output with no-asm:
+ *
+ *	                  sign    verify    sign/s verify/s
+ *	rsa  512 bits   0.0006s   0.0001s   1683.8  18456.2
+ *	rsa 1024 bits   0.0028s   0.0002s    356.0   6407.0
+ *	rsa 2048 bits   0.0172s   0.0005s     58.0   1957.8
+ *	rsa 4096 bits   0.1155s   0.0018s      8.7    555.6
+ *	                  sign    verify    sign/s verify/s
+ *	dsa  512 bits   0.0005s   0.0006s   2100.8   1768.3
+ *	dsa 1024 bits   0.0014s   0.0018s    692.3    559.2
+ *	dsa 2048 bits   0.0049s   0.0061s    204.7    165.0
+ *
+ *    'apps/openssl speed rsa dsa' output with this module:
+ *
+ *	                  sign    verify    sign/s verify/s
+ *	rsa  512 bits   0.0004s   0.0000s   2767.1  33297.9
+ *	rsa 1024 bits   0.0012s   0.0001s    867.4  14674.7
+ *	rsa 2048 bits   0.0061s   0.0002s    164.0   5270.0
+ *	rsa 4096 bits   0.0384s   0.0006s     26.1   1650.8
+ *	                  sign    verify    sign/s verify/s
+ *	dsa  512 bits   0.0002s   0.0003s   4442.2   3786.3
+ *	dsa 1024 bits   0.0005s   0.0007s   1835.1   1497.4
+ *	dsa 2048 bits   0.0016s   0.0020s    620.4    504.6
+ *
+ *    For the reference. IA-32 assembler implementation performs
+ *    very much like 64-bit code compiled with no-asm on the same
+ *    machine.
+ */
+
+#ifdef _WIN64
+#define BN_ULONG unsigned long long
+#else
+#define BN_ULONG unsigned long
+#endif
+
+#undef mul
+#undef mul_add
+#undef sqr
+
+/*
+ * "m"(a), "+m"(r)	is the way to favor DirectPath µ-code;
+ * "g"(0)		let the compiler to decide where does it
+ *			want to keep the value of zero;
+ */
+#define mul_add(r,a,word,carry) do {	\
+	register BN_ULONG high,low;	\
+	asm ("mulq %3"			\
+		: "=a"(low),"=d"(high)	\
+		: "a"(word),"m"(a)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(carry),"+d"(high)\
+		: "a"(low),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+m"(r),"+d"(high)	\
+		: "r"(carry),"g"(0)	\
+		: "cc");		\
+	carry=high;			\
+	} while (0)
+
+#define mul(r,a,word,carry) do {	\
+	register BN_ULONG high,low;	\
+	asm ("mulq %3"			\
+		: "=a"(low),"=d"(high)	\
+		: "a"(word),"g"(a)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(carry),"+d"(high)\
+		: "a"(low),"g"(0)	\
+		: "cc");		\
+	(r)=carry, carry=high;		\
+	} while (0)
+
+#define sqr(r0,r1,a)			\
+	asm ("mulq %2"			\
+		: "=a"(r0),"=d"(r1)	\
+		: "a"(a)		\
+		: "cc");
+
+BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG c1=0;
+
+	if (num <= 0) return(c1);
+
+	while (num&~3)
+		{
+		mul_add(rp[0],ap[0],w,c1);
+		mul_add(rp[1],ap[1],w,c1);
+		mul_add(rp[2],ap[2],w,c1);
+		mul_add(rp[3],ap[3],w,c1);
+		ap+=4; rp+=4; num-=4;
+		}
+	if (num)
+		{
+		mul_add(rp[0],ap[0],w,c1); if (--num==0) return c1;
+		mul_add(rp[1],ap[1],w,c1); if (--num==0) return c1;
+		mul_add(rp[2],ap[2],w,c1); return c1;
+		}
+	
+	return(c1);
+	} 
+
+BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG c1=0;
+
+	if (num <= 0) return(c1);
+
+	while (num&~3)
+		{
+		mul(rp[0],ap[0],w,c1);
+		mul(rp[1],ap[1],w,c1);
+		mul(rp[2],ap[2],w,c1);
+		mul(rp[3],ap[3],w,c1);
+		ap+=4; rp+=4; num-=4;
+		}
+	if (num)
+		{
+		mul(rp[0],ap[0],w,c1); if (--num == 0) return c1;
+		mul(rp[1],ap[1],w,c1); if (--num == 0) return c1;
+		mul(rp[2],ap[2],w,c1);
+		}
+	return(c1);
+	} 
+
+void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n)
+        {
+	if (n <= 0) return;
+
+	while (n&~3)
+		{
+		sqr(r[0],r[1],a[0]);
+		sqr(r[2],r[3],a[1]);
+		sqr(r[4],r[5],a[2]);
+		sqr(r[6],r[7],a[3]);
+		a+=4; r+=8; n-=4;
+		}
+	if (n)
+		{
+		sqr(r[0],r[1],a[0]); if (--n == 0) return;
+		sqr(r[2],r[3],a[1]); if (--n == 0) return;
+		sqr(r[4],r[5],a[2]);
+		}
+	}
+
+BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
+{	BN_ULONG ret,waste;
+
+	asm ("divq	%4"
+		: "=a"(ret),"=d"(waste)
+		: "a"(l),"d"(h),"g"(d)
+		: "cc");
+
+	return ret;
+}
+
+BN_ULONG bn_add_words (BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int n)
+{ BN_ULONG ret=0,i=0;
+
+	if (n <= 0) return 0;
+
+	asm (
+	"	subq	%2,%2		\n"
+	".p2align 4			\n"
+	"1:	movq	(%4,%2,8),%0	\n"
+	"	adcq	(%5,%2,8),%0	\n"
+	"	movq	%0,(%3,%2,8)	\n"
+	"	leaq	1(%2),%2	\n"
+	"	loop	1b		\n"
+	"	sbbq	%0,%0		\n"
+		: "=&a"(ret),"+c"(n),"=&r"(i)
+		: "r"(rp),"r"(ap),"r"(bp)
+		: "cc"
+	);
+
+  return ret&1;
+}
+
+#ifndef SIMICS
+BN_ULONG bn_sub_words (BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int n)
+{ BN_ULONG ret=0,i=0;
+
+	if (n <= 0) return 0;
+
+	asm (
+	"	subq	%2,%2		\n"
+	".p2align 4			\n"
+	"1:	movq	(%4,%2,8),%0	\n"
+	"	sbbq	(%5,%2,8),%0	\n"
+	"	movq	%0,(%3,%2,8)	\n"
+	"	leaq	1(%2),%2	\n"
+	"	loop	1b		\n"
+	"	sbbq	%0,%0		\n"
+		: "=&a"(ret),"+c"(n),"=&r"(i)
+		: "r"(rp),"r"(ap),"r"(bp)
+		: "cc"
+	);
+
+  return ret&1;
+}
+#else
+/* Simics 1.4<7 has buggy sbbq:-( */
+#define BN_MASK2 0xffffffffffffffffL
+BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+        {
+	BN_ULONG t1,t2;
+	int c=0;
+
+	if (n <= 0) return((BN_ULONG)0);
+
+	for (;;)
+		{
+		t1=a[0]; t2=b[0];
+		r[0]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		t1=a[1]; t2=b[1];
+		r[1]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		t1=a[2]; t2=b[2];
+		r[2]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		t1=a[3]; t2=b[3];
+		r[3]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		if (--n <= 0) break;
+
+		a+=4;
+		b+=4;
+		r+=4;
+		}
+	return(c);
+	}
+#endif
+
+/* mul_add_c(a,b,c0,c1,c2)  -- c+=a*b for three word number c=(c2,c1,c0) */
+/* mul_add_c2(a,b,c0,c1,c2) -- c+=2*a*b for three word number c=(c2,c1,c0) */
+/* sqr_add_c(a,i,c0,c1,c2)  -- c+=a[i]^2 for three word number c=(c2,c1,c0) */
+/* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */
+
+#if 0
+/* original macros are kept for reference purposes */
+#define mul_add_c(a,b,c0,c1,c2) {	\
+	BN_ULONG ta=(a),tb=(b);		\
+	t1 = ta * tb;			\
+	t2 = BN_UMULT_HIGH(ta,tb);	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define mul_add_c2(a,b,c0,c1,c2) {	\
+	BN_ULONG ta=(a),tb=(b),t0;	\
+	t1 = BN_UMULT_HIGH(ta,tb);	\
+	t0 = ta * tb;			\
+	t2 = t1+t1; c2 += (t2<t1)?1:0;	\
+	t1 = t0+t0; t2 += (t1<t0)?1:0;	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+#else
+#define mul_add_c(a,b,c0,c1,c2)	do {	\
+	asm ("mulq %3"			\
+		: "=a"(t1),"=d"(t2)	\
+		: "a"(a),"m"(b)		\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c0),"+d"(t2)	\
+		: "a"(t1),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c1),"+r"(c2)	\
+		: "d"(t2),"g"(0)	\
+		: "cc");		\
+	} while (0)
+
+#define sqr_add_c(a,i,c0,c1,c2)	do {	\
+	asm ("mulq %2"			\
+		: "=a"(t1),"=d"(t2)	\
+		: "a"(a[i])		\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c0),"+d"(t2)	\
+		: "a"(t1),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c1),"+r"(c2)	\
+		: "d"(t2),"g"(0)	\
+		: "cc");		\
+	} while (0)
+
+#define mul_add_c2(a,b,c0,c1,c2) do {	\
+	asm ("mulq %3"			\
+		: "=a"(t1),"=d"(t2)	\
+		: "a"(a),"m"(b)		\
+		: "cc");		\
+	asm ("addq %0,%0; adcq %2,%1"	\
+		: "+d"(t2),"+r"(c2)	\
+		: "g"(0)		\
+		: "cc");		\
+	asm ("addq %0,%0; adcq %2,%1"	\
+		: "+a"(t1),"+d"(t2)	\
+		: "g"(0)		\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c0),"+d"(t2)	\
+		: "a"(t1),"g"(0)	\
+		: "cc");		\
+	asm ("addq %2,%0; adcq %3,%1"	\
+		: "+r"(c1),"+r"(c2)	\
+		: "d"(t2),"g"(0)	\
+		: "cc");		\
+	} while (0)
+#endif
+
+#define sqr_add_c2(a,i,j,c0,c1,c2)	\
+	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
+
+void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	mul_add_c(a[0],b[0],c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	mul_add_c(a[0],b[1],c2,c3,c1);
+	mul_add_c(a[1],b[0],c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	mul_add_c(a[2],b[0],c3,c1,c2);
+	mul_add_c(a[1],b[1],c3,c1,c2);
+	mul_add_c(a[0],b[2],c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	mul_add_c(a[0],b[3],c1,c2,c3);
+	mul_add_c(a[1],b[2],c1,c2,c3);
+	mul_add_c(a[2],b[1],c1,c2,c3);
+	mul_add_c(a[3],b[0],c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	mul_add_c(a[4],b[0],c2,c3,c1);
+	mul_add_c(a[3],b[1],c2,c3,c1);
+	mul_add_c(a[2],b[2],c2,c3,c1);
+	mul_add_c(a[1],b[3],c2,c3,c1);
+	mul_add_c(a[0],b[4],c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	mul_add_c(a[0],b[5],c3,c1,c2);
+	mul_add_c(a[1],b[4],c3,c1,c2);
+	mul_add_c(a[2],b[3],c3,c1,c2);
+	mul_add_c(a[3],b[2],c3,c1,c2);
+	mul_add_c(a[4],b[1],c3,c1,c2);
+	mul_add_c(a[5],b[0],c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	mul_add_c(a[6],b[0],c1,c2,c3);
+	mul_add_c(a[5],b[1],c1,c2,c3);
+	mul_add_c(a[4],b[2],c1,c2,c3);
+	mul_add_c(a[3],b[3],c1,c2,c3);
+	mul_add_c(a[2],b[4],c1,c2,c3);
+	mul_add_c(a[1],b[5],c1,c2,c3);
+	mul_add_c(a[0],b[6],c1,c2,c3);
+	r[6]=c1;
+	c1=0;
+	mul_add_c(a[0],b[7],c2,c3,c1);
+	mul_add_c(a[1],b[6],c2,c3,c1);
+	mul_add_c(a[2],b[5],c2,c3,c1);
+	mul_add_c(a[3],b[4],c2,c3,c1);
+	mul_add_c(a[4],b[3],c2,c3,c1);
+	mul_add_c(a[5],b[2],c2,c3,c1);
+	mul_add_c(a[6],b[1],c2,c3,c1);
+	mul_add_c(a[7],b[0],c2,c3,c1);
+	r[7]=c2;
+	c2=0;
+	mul_add_c(a[7],b[1],c3,c1,c2);
+	mul_add_c(a[6],b[2],c3,c1,c2);
+	mul_add_c(a[5],b[3],c3,c1,c2);
+	mul_add_c(a[4],b[4],c3,c1,c2);
+	mul_add_c(a[3],b[5],c3,c1,c2);
+	mul_add_c(a[2],b[6],c3,c1,c2);
+	mul_add_c(a[1],b[7],c3,c1,c2);
+	r[8]=c3;
+	c3=0;
+	mul_add_c(a[2],b[7],c1,c2,c3);
+	mul_add_c(a[3],b[6],c1,c2,c3);
+	mul_add_c(a[4],b[5],c1,c2,c3);
+	mul_add_c(a[5],b[4],c1,c2,c3);
+	mul_add_c(a[6],b[3],c1,c2,c3);
+	mul_add_c(a[7],b[2],c1,c2,c3);
+	r[9]=c1;
+	c1=0;
+	mul_add_c(a[7],b[3],c2,c3,c1);
+	mul_add_c(a[6],b[4],c2,c3,c1);
+	mul_add_c(a[5],b[5],c2,c3,c1);
+	mul_add_c(a[4],b[6],c2,c3,c1);
+	mul_add_c(a[3],b[7],c2,c3,c1);
+	r[10]=c2;
+	c2=0;
+	mul_add_c(a[4],b[7],c3,c1,c2);
+	mul_add_c(a[5],b[6],c3,c1,c2);
+	mul_add_c(a[6],b[5],c3,c1,c2);
+	mul_add_c(a[7],b[4],c3,c1,c2);
+	r[11]=c3;
+	c3=0;
+	mul_add_c(a[7],b[5],c1,c2,c3);
+	mul_add_c(a[6],b[6],c1,c2,c3);
+	mul_add_c(a[5],b[7],c1,c2,c3);
+	r[12]=c1;
+	c1=0;
+	mul_add_c(a[6],b[7],c2,c3,c1);
+	mul_add_c(a[7],b[6],c2,c3,c1);
+	r[13]=c2;
+	c2=0;
+	mul_add_c(a[7],b[7],c3,c1,c2);
+	r[14]=c3;
+	r[15]=c1;
+	}
+
+void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	mul_add_c(a[0],b[0],c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	mul_add_c(a[0],b[1],c2,c3,c1);
+	mul_add_c(a[1],b[0],c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	mul_add_c(a[2],b[0],c3,c1,c2);
+	mul_add_c(a[1],b[1],c3,c1,c2);
+	mul_add_c(a[0],b[2],c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	mul_add_c(a[0],b[3],c1,c2,c3);
+	mul_add_c(a[1],b[2],c1,c2,c3);
+	mul_add_c(a[2],b[1],c1,c2,c3);
+	mul_add_c(a[3],b[0],c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	mul_add_c(a[3],b[1],c2,c3,c1);
+	mul_add_c(a[2],b[2],c2,c3,c1);
+	mul_add_c(a[1],b[3],c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	mul_add_c(a[2],b[3],c3,c1,c2);
+	mul_add_c(a[3],b[2],c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	mul_add_c(a[3],b[3],c1,c2,c3);
+	r[6]=c1;
+	r[7]=c2;
+	}
+
+void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a)
+	{
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	sqr_add_c(a,0,c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	sqr_add_c2(a,1,0,c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	sqr_add_c(a,1,c3,c1,c2);
+	sqr_add_c2(a,2,0,c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	sqr_add_c2(a,3,0,c1,c2,c3);
+	sqr_add_c2(a,2,1,c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	sqr_add_c(a,2,c2,c3,c1);
+	sqr_add_c2(a,3,1,c2,c3,c1);
+	sqr_add_c2(a,4,0,c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	sqr_add_c2(a,5,0,c3,c1,c2);
+	sqr_add_c2(a,4,1,c3,c1,c2);
+	sqr_add_c2(a,3,2,c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	sqr_add_c(a,3,c1,c2,c3);
+	sqr_add_c2(a,4,2,c1,c2,c3);
+	sqr_add_c2(a,5,1,c1,c2,c3);
+	sqr_add_c2(a,6,0,c1,c2,c3);
+	r[6]=c1;
+	c1=0;
+	sqr_add_c2(a,7,0,c2,c3,c1);
+	sqr_add_c2(a,6,1,c2,c3,c1);
+	sqr_add_c2(a,5,2,c2,c3,c1);
+	sqr_add_c2(a,4,3,c2,c3,c1);
+	r[7]=c2;
+	c2=0;
+	sqr_add_c(a,4,c3,c1,c2);
+	sqr_add_c2(a,5,3,c3,c1,c2);
+	sqr_add_c2(a,6,2,c3,c1,c2);
+	sqr_add_c2(a,7,1,c3,c1,c2);
+	r[8]=c3;
+	c3=0;
+	sqr_add_c2(a,7,2,c1,c2,c3);
+	sqr_add_c2(a,6,3,c1,c2,c3);
+	sqr_add_c2(a,5,4,c1,c2,c3);
+	r[9]=c1;
+	c1=0;
+	sqr_add_c(a,5,c2,c3,c1);
+	sqr_add_c2(a,6,4,c2,c3,c1);
+	sqr_add_c2(a,7,3,c2,c3,c1);
+	r[10]=c2;
+	c2=0;
+	sqr_add_c2(a,7,4,c3,c1,c2);
+	sqr_add_c2(a,6,5,c3,c1,c2);
+	r[11]=c3;
+	c3=0;
+	sqr_add_c(a,6,c1,c2,c3);
+	sqr_add_c2(a,7,5,c1,c2,c3);
+	r[12]=c1;
+	c1=0;
+	sqr_add_c2(a,7,6,c2,c3,c1);
+	r[13]=c2;
+	c2=0;
+	sqr_add_c(a,7,c3,c1,c2);
+	r[14]=c3;
+	r[15]=c1;
+	}
+
+void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a)
+	{
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	sqr_add_c(a,0,c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	sqr_add_c2(a,1,0,c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	sqr_add_c(a,1,c3,c1,c2);
+	sqr_add_c2(a,2,0,c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	sqr_add_c2(a,3,0,c1,c2,c3);
+	sqr_add_c2(a,2,1,c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	sqr_add_c(a,2,c2,c3,c1);
+	sqr_add_c2(a,3,1,c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	sqr_add_c2(a,3,2,c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	sqr_add_c(a,3,c1,c2,c3);
+	r[6]=c1;
+	r[7]=c2;
+	}
+#endif
diff --git a/app/openssl/crypto/bn/asm/x86_64-mont.pl b/app/openssl/crypto/bn/asm/x86_64-mont.pl
new file mode 100755
index 00000000..3b7a6f24
--- /dev/null
+++ b/app/openssl/crypto/bn/asm/x86_64-mont.pl
@@ -0,0 +1,330 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# October 2005.
+#
+# Montgomery multiplication routine for x86_64. While it gives modest
+# 9% improvement of rsa4096 sign on Opteron, rsa512 sign runs more
+# than twice, >2x, as fast. Most common rsa1024 sign is improved by
+# respectful 50%. It remains to be seen if loop unrolling and
+# dedicated squaring routine can provide further improvement...
+
+$flavour = shift;
+$output  = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+# int bn_mul_mont(
+$rp="%rdi";	# BN_ULONG *rp,
+$ap="%rsi";	# const BN_ULONG *ap,
+$bp="%rdx";	# const BN_ULONG *bp,
+$np="%rcx";	# const BN_ULONG *np,
+$n0="%r8";	# const BN_ULONG *n0,
+$num="%r9";	# int num);
+$lo0="%r10";
+$hi0="%r11";
+$bp="%r12";	# reassign $bp
+$hi1="%r13";
+$i="%r14";
+$j="%r15";
+$m0="%rbx";
+$m1="%rbp";
+
+$code=<<___;
+.text
+
+.globl	bn_mul_mont
+.type	bn_mul_mont,\@function,6
+.align	16
+bn_mul_mont:
+	push	%rbx
+	push	%rbp
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+
+	mov	${num}d,${num}d
+	lea	2($num),%r10
+	mov	%rsp,%r11
+	neg	%r10
+	lea	(%rsp,%r10,8),%rsp	# tp=alloca(8*(num+2))
+	and	\$-1024,%rsp		# minimize TLB usage
+
+	mov	%r11,8(%rsp,$num,8)	# tp[num+1]=%rsp
+.Lprologue:
+	mov	%rdx,$bp		# $bp reassigned, remember?
+
+	mov	($n0),$n0		# pull n0[0] value
+
+	xor	$i,$i			# i=0
+	xor	$j,$j			# j=0
+
+	mov	($bp),$m0		# m0=bp[0]
+	mov	($ap),%rax
+	mulq	$m0			# ap[0]*bp[0]
+	mov	%rax,$lo0
+	mov	%rdx,$hi0
+
+	imulq	$n0,%rax		# "tp[0]"*n0
+	mov	%rax,$m1
+
+	mulq	($np)			# np[0]*m1
+	add	$lo0,%rax		# discarded
+	adc	\$0,%rdx
+	mov	%rdx,$hi1
+
+	lea	1($j),$j		# j++
+.L1st:
+	mov	($ap,$j,8),%rax
+	mulq	$m0			# ap[j]*bp[0]
+	add	$hi0,%rax
+	adc	\$0,%rdx
+	mov	%rax,$lo0
+	mov	($np,$j,8),%rax
+	mov	%rdx,$hi0
+
+	mulq	$m1			# np[j]*m1
+	add	$hi1,%rax
+	lea	1($j),$j		# j++
+	adc	\$0,%rdx
+	add	$lo0,%rax		# np[j]*m1+ap[j]*bp[0]
+	adc	\$0,%rdx
+	mov	%rax,-16(%rsp,$j,8)	# tp[j-1]
+	cmp	$num,$j
+	mov	%rdx,$hi1
+	jl	.L1st
+
+	xor	%rdx,%rdx
+	add	$hi0,$hi1
+	adc	\$0,%rdx
+	mov	$hi1,-8(%rsp,$num,8)
+	mov	%rdx,(%rsp,$num,8)	# store upmost overflow bit
+
+	lea	1($i),$i		# i++
+.align	4
+.Louter:
+	xor	$j,$j			# j=0
+
+	mov	($bp,$i,8),$m0		# m0=bp[i]
+	mov	($ap),%rax		# ap[0]
+	mulq	$m0			# ap[0]*bp[i]
+	add	(%rsp),%rax		# ap[0]*bp[i]+tp[0]
+	adc	\$0,%rdx
+	mov	%rax,$lo0
+	mov	%rdx,$hi0
+
+	imulq	$n0,%rax		# tp[0]*n0
+	mov	%rax,$m1
+
+	mulq	($np,$j,8)		# np[0]*m1
+	add	$lo0,%rax		# discarded
+	mov	8(%rsp),$lo0		# tp[1]
+	adc	\$0,%rdx
+	mov	%rdx,$hi1
+
+	lea	1($j),$j		# j++
+.align	4
+.Linner:
+	mov	($ap,$j,8),%rax
+	mulq	$m0			# ap[j]*bp[i]
+	add	$hi0,%rax
+	adc	\$0,%rdx
+	add	%rax,$lo0		# ap[j]*bp[i]+tp[j]
+	mov	($np,$j,8),%rax
+	adc	\$0,%rdx
+	mov	%rdx,$hi0
+
+	mulq	$m1			# np[j]*m1
+	add	$hi1,%rax
+	lea	1($j),$j		# j++
+	adc	\$0,%rdx
+	add	$lo0,%rax		# np[j]*m1+ap[j]*bp[i]+tp[j]
+	adc	\$0,%rdx
+	mov	(%rsp,$j,8),$lo0
+	cmp	$num,$j
+	mov	%rax,-16(%rsp,$j,8)	# tp[j-1]
+	mov	%rdx,$hi1
+	jl	.Linner
+
+	xor	%rdx,%rdx
+	add	$hi0,$hi1
+	adc	\$0,%rdx
+	add	$lo0,$hi1		# pull upmost overflow bit
+	adc	\$0,%rdx
+	mov	$hi1,-8(%rsp,$num,8)
+	mov	%rdx,(%rsp,$num,8)	# store upmost overflow bit
+
+	lea	1($i),$i		# i++
+	cmp	$num,$i
+	jl	.Louter
+
+	lea	(%rsp),$ap		# borrow ap for tp
+	lea	-1($num),$j		# j=num-1
+
+	mov	($ap),%rax		# tp[0]
+	xor	$i,$i			# i=0 and clear CF!
+	jmp	.Lsub
+.align	16
+.Lsub:	sbb	($np,$i,8),%rax
+	mov	%rax,($rp,$i,8)		# rp[i]=tp[i]-np[i]
+	dec	$j			# doesn't affect CF!
+	mov	8($ap,$i,8),%rax	# tp[i+1]
+	lea	1($i),$i		# i++
+	jge	.Lsub
+
+	sbb	\$0,%rax		# handle upmost overflow bit
+	and	%rax,$ap
+	not	%rax
+	mov	$rp,$np
+	and	%rax,$np
+	lea	-1($num),$j
+	or	$np,$ap			# ap=borrow?tp:rp
+.align	16
+.Lcopy:					# copy or in-place refresh
+	mov	($ap,$j,8),%rax
+	mov	%rax,($rp,$j,8)		# rp[i]=tp[i]
+	mov	$i,(%rsp,$j,8)		# zap temporary vector
+	dec	$j
+	jge	.Lcopy
+
+	mov	8(%rsp,$num,8),%rsi	# restore %rsp
+	mov	\$1,%rax
+	mov	(%rsi),%r15
+	mov	8(%rsi),%r14
+	mov	16(%rsi),%r13
+	mov	24(%rsi),%r12
+	mov	32(%rsi),%rbp
+	mov	40(%rsi),%rbx
+	lea	48(%rsi),%rsp
+.Lepilogue:
+	ret
+.size	bn_mul_mont,.-bn_mul_mont
+.asciz	"Montgomery Multiplication for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
+.align	16
+___
+
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
+if ($win64) {
+$rec="%rcx";
+$frame="%rdx";
+$context="%r8";
+$disp="%r9";
+
+$code.=<<___;
+.extern	__imp_RtlVirtualUnwind
+.type	se_handler,\@abi-omnipotent
+.align	16
+se_handler:
+	push	%rsi
+	push	%rdi
+	push	%rbx
+	push	%rbp
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+	pushfq
+	sub	\$64,%rsp
+
+	mov	120($context),%rax	# pull context->Rax
+	mov	248($context),%rbx	# pull context->Rip
+
+	lea	.Lprologue(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<.Lprologue
+	jb	.Lin_prologue
+
+	mov	152($context),%rax	# pull context->Rsp
+
+	lea	.Lepilogue(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip>=.Lepilogue
+	jae	.Lin_prologue
+
+	mov	192($context),%r10	# pull $num
+	mov	8(%rax,%r10,8),%rax	# pull saved stack pointer
+	lea	48(%rax),%rax
+
+	mov	-8(%rax),%rbx
+	mov	-16(%rax),%rbp
+	mov	-24(%rax),%r12
+	mov	-32(%rax),%r13
+	mov	-40(%rax),%r14
+	mov	-48(%rax),%r15
+	mov	%rbx,144($context)	# restore context->Rbx
+	mov	%rbp,160($context)	# restore context->Rbp
+	mov	%r12,216($context)	# restore context->R12
+	mov	%r13,224($context)	# restore context->R13
+	mov	%r14,232($context)	# restore context->R14
+	mov	%r15,240($context)	# restore context->R15
+
+.Lin_prologue:
+	mov	8(%rax),%rdi
+	mov	16(%rax),%rsi
+	mov	%rax,152($context)	# restore context->Rsp
+	mov	%rsi,168($context)	# restore context->Rsi
+	mov	%rdi,176($context)	# restore context->Rdi
+
+	mov	40($disp),%rdi		# disp->ContextRecord
+	mov	$context,%rsi		# context
+	mov	\$154,%ecx		# sizeof(CONTEXT)
+	.long	0xa548f3fc		# cld; rep movsq
+
+	mov	$disp,%rsi
+	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
+	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
+	mov	0(%rsi),%r8		# arg3, disp->ControlPc
+	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
+	mov	40(%rsi),%r10		# disp->ContextRecord
+	lea	56(%rsi),%r11		# &disp->HandlerData
+	lea	24(%rsi),%r12		# &disp->EstablisherFrame
+	mov	%r10,32(%rsp)		# arg5
+	mov	%r11,40(%rsp)		# arg6
+	mov	%r12,48(%rsp)		# arg7
+	mov	%rcx,56(%rsp)		# arg8, (NULL)
+	call	*__imp_RtlVirtualUnwind(%rip)
+
+	mov	\$1,%eax		# ExceptionContinueSearch
+	add	\$64,%rsp
+	popfq
+	pop	%r15
+	pop	%r14
+	pop	%r13
+	pop	%r12
+	pop	%rbp
+	pop	%rbx
+	pop	%rdi
+	pop	%rsi
+	ret
+.size	se_handler,.-se_handler
+
+.section	.pdata
+.align	4
+	.rva	.LSEH_begin_bn_mul_mont
+	.rva	.LSEH_end_bn_mul_mont
+	.rva	.LSEH_info_bn_mul_mont
+
+.section	.xdata
+.align	8
+.LSEH_info_bn_mul_mont:
+	.byte	9,0,0,0
+	.rva	se_handler
+___
+}
+
+print $code;
+close STDOUT;
diff --git a/app/openssl/crypto/bn/bn.h b/app/openssl/crypto/bn/bn.h
new file mode 100644
index 00000000..a0bc4783
--- /dev/null
+++ b/app/openssl/crypto/bn/bn.h
@@ -0,0 +1,876 @@
+/* crypto/bn/bn.h */
+/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ *
+ * Portions of the attached software ("Contribution") are developed by 
+ * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
+ *
+ * The Contribution is licensed pursuant to the Eric Young open source
+ * license provided above.
+ *
+ * The binary polynomial arithmetic software is originally written by 
+ * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
+ *
+ */
+
+#ifndef HEADER_BN_H
+#define HEADER_BN_H
+
+#include <openssl/e_os2.h>
+#ifndef OPENSSL_NO_FP_API
+#include <stdio.h> /* FILE */
+#endif
+#include <openssl/ossl_typ.h>
+#include <openssl/crypto.h>
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+/* These preprocessor symbols control various aspects of the bignum headers and
+ * library code. They're not defined by any "normal" configuration, as they are
+ * intended for development and testing purposes. NB: defining all three can be
+ * useful for debugging application code as well as openssl itself.
+ *
+ * BN_DEBUG - turn on various debugging alterations to the bignum code
+ * BN_DEBUG_RAND - uses random poisoning of unused words to trip up
+ * mismanagement of bignum internals. You must also define BN_DEBUG.
+ */
+/* #define BN_DEBUG */
+/* #define BN_DEBUG_RAND */
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+#define BN_MUL_COMBA
+#define BN_SQR_COMBA
+#define BN_RECURSION
+#endif
+
+/* This next option uses the C libraries (2 word)/(1 word) function.
+ * If it is not defined, I use my C version (which is slower).
+ * The reason for this flag is that when the particular C compiler
+ * library routine is used, and the library is linked with a different
+ * compiler, the library is missing.  This mostly happens when the
+ * library is built with gcc and then linked using normal cc.  This would
+ * be a common occurrence because gcc normally produces code that is
+ * 2 times faster than system compilers for the big number stuff.
+ * For machines with only one compiler (or shared libraries), this should
+ * be on.  Again this in only really a problem on machines
+ * using "long long's", are 32bit, and are not using my assembler code. */
+#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || \
+    defined(OPENSSL_SYS_WIN32) || defined(linux)
+# ifndef BN_DIV2W
+#  define BN_DIV2W
+# endif
+#endif
+
+/* assuming long is 64bit - this is the DEC Alpha
+ * unsigned long long is only 64 bits :-(, don't define
+ * BN_LLONG for the DEC Alpha */
+#ifdef SIXTY_FOUR_BIT_LONG
+#define BN_ULLONG	unsigned long long
+#define BN_ULONG	unsigned long
+#define BN_LONG		long
+#define BN_BITS		128
+#define BN_BYTES	8
+#define BN_BITS2	64
+#define BN_BITS4	32
+#define BN_MASK		(0xffffffffffffffffffffffffffffffffLL)
+#define BN_MASK2	(0xffffffffffffffffL)
+#define BN_MASK2l	(0xffffffffL)
+#define BN_MASK2h	(0xffffffff00000000L)
+#define BN_MASK2h1	(0xffffffff80000000L)
+#define BN_TBIT		(0x8000000000000000L)
+#define BN_DEC_CONV	(10000000000000000000UL)
+#define BN_DEC_FMT1	"%lu"
+#define BN_DEC_FMT2	"%019lu"
+#define BN_DEC_NUM	19
+#define BN_HEX_FMT1	"%lX"
+#define BN_HEX_FMT2	"%016lX"
+#endif
+
+/* This is where the long long data type is 64 bits, but long is 32.
+ * For machines where there are 64bit registers, this is the mode to use.
+ * IRIX, on R4000 and above should use this mode, along with the relevant
+ * assembler code :-).  Do NOT define BN_LLONG.
+ */
+#ifdef SIXTY_FOUR_BIT
+#undef BN_LLONG
+#undef BN_ULLONG
+#define BN_ULONG	unsigned long long
+#define BN_LONG		long long
+#define BN_BITS		128
+#define BN_BYTES	8
+#define BN_BITS2	64
+#define BN_BITS4	32
+#define BN_MASK2	(0xffffffffffffffffLL)
+#define BN_MASK2l	(0xffffffffL)
+#define BN_MASK2h	(0xffffffff00000000LL)
+#define BN_MASK2h1	(0xffffffff80000000LL)
+#define BN_TBIT		(0x8000000000000000LL)
+#define BN_DEC_CONV	(10000000000000000000ULL)
+#define BN_DEC_FMT1	"%llu"
+#define BN_DEC_FMT2	"%019llu"
+#define BN_DEC_NUM	19
+#define BN_HEX_FMT1	"%llX"
+#define BN_HEX_FMT2	"%016llX"
+#endif
+
+#ifdef THIRTY_TWO_BIT
+#ifdef BN_LLONG
+# if defined(_WIN32) && !defined(__GNUC__)
+#  define BN_ULLONG	unsigned __int64
+#  define BN_MASK	(0xffffffffffffffffI64)
+# else
+#  define BN_ULLONG	unsigned long long
+#  define BN_MASK	(0xffffffffffffffffLL)
+# endif
+#endif
+#define BN_ULONG	unsigned int
+#define BN_LONG		int
+#define BN_BITS		64
+#define BN_BYTES	4
+#define BN_BITS2	32
+#define BN_BITS4	16
+#define BN_MASK2	(0xffffffffL)
+#define BN_MASK2l	(0xffff)
+#define BN_MASK2h1	(0xffff8000L)
+#define BN_MASK2h	(0xffff0000L)
+#define BN_TBIT		(0x80000000L)
+#define BN_DEC_CONV	(1000000000L)
+#define BN_DEC_FMT1	"%u"
+#define BN_DEC_FMT2	"%09u"
+#define BN_DEC_NUM	9
+#define BN_HEX_FMT1	"%X"
+#define BN_HEX_FMT2	"%08X"
+#endif
+
+/* 2011-02-22 SMS.
+ * In various places, a size_t variable or a type cast to size_t was
+ * used to perform integer-only operations on pointers.  This failed on
+ * VMS with 64-bit pointers (CC /POINTER_SIZE = 64) because size_t is
+ * still only 32 bits.  What's needed in these cases is an integer type
+ * with the same size as a pointer, which size_t is not certain to be. 
+ * The only fix here is VMS-specific.
+ */
+#if defined(OPENSSL_SYS_VMS)
+# if __INITIAL_POINTER_SIZE == 64
+#  define PTR_SIZE_INT long long
+# else /* __INITIAL_POINTER_SIZE == 64 */
+#  define PTR_SIZE_INT int
+# endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+#else /* defined(OPENSSL_SYS_VMS) */
+# define PTR_SIZE_INT size_t
+#endif /* defined(OPENSSL_SYS_VMS) [else] */
+
+#define BN_DEFAULT_BITS	1280
+
+#define BN_FLG_MALLOCED		0x01
+#define BN_FLG_STATIC_DATA	0x02
+#define BN_FLG_CONSTTIME	0x04 /* avoid leaking exponent information through timing,
+                                      * BN_mod_exp_mont() will call BN_mod_exp_mont_consttime,
+                                      * BN_div() will call BN_div_no_branch,
+                                      * BN_mod_inverse() will call BN_mod_inverse_no_branch.
+                                      */
+
+#ifndef OPENSSL_NO_DEPRECATED
+#define BN_FLG_EXP_CONSTTIME BN_FLG_CONSTTIME /* deprecated name for the flag */
+                                      /* avoid leaking exponent information through timings
+                                      * (BN_mod_exp_mont() will call BN_mod_exp_mont_consttime) */
+#endif
+
+#ifndef OPENSSL_NO_DEPRECATED
+#define BN_FLG_FREE		0x8000	/* used for debuging */
+#endif
+#define BN_set_flags(b,n)	((b)->flags|=(n))
+#define BN_get_flags(b,n)	((b)->flags&(n))
+
+/* get a clone of a BIGNUM with changed flags, for *temporary* use only
+ * (the two BIGNUMs cannot not be used in parallel!) */
+#define BN_with_flags(dest,b,n)  ((dest)->d=(b)->d, \
+                                  (dest)->top=(b)->top, \
+                                  (dest)->dmax=(b)->dmax, \
+                                  (dest)->neg=(b)->neg, \
+                                  (dest)->flags=(((dest)->flags & BN_FLG_MALLOCED) \
+                                                 |  ((b)->flags & ~BN_FLG_MALLOCED) \
+                                                 |  BN_FLG_STATIC_DATA \
+                                                 |  (n)))
+
+/* Already declared in ossl_typ.h */
+#if 0
+typedef struct bignum_st BIGNUM;
+/* Used for temp variables (declaration hidden in bn_lcl.h) */
+typedef struct bignum_ctx BN_CTX;
+typedef struct bn_blinding_st BN_BLINDING;
+typedef struct bn_mont_ctx_st BN_MONT_CTX;
+typedef struct bn_recp_ctx_st BN_RECP_CTX;
+typedef struct bn_gencb_st BN_GENCB;
+#endif
+
+struct bignum_st
+	{
+	BN_ULONG *d;	/* Pointer to an array of 'BN_BITS2' bit chunks. */
+	int top;	/* Index of last used d +1. */
+	/* The next are internal book keeping for bn_expand. */
+	int dmax;	/* Size of the d array. */
+	int neg;	/* one if the number is negative */
+	int flags;
+	};
+
+/* Used for montgomery multiplication */
+struct bn_mont_ctx_st
+	{
+	int ri;        /* number of bits in R */
+	BIGNUM RR;     /* used to convert to montgomery form */
+	BIGNUM N;      /* The modulus */
+	BIGNUM Ni;     /* R*(1/R mod N) - N*Ni = 1
+	                * (Ni is only stored for bignum algorithm) */
+	BN_ULONG n0[2];/* least significant word(s) of Ni;
+	                  (type changed with 0.9.9, was "BN_ULONG n0;" before) */
+	int flags;
+	};
+
+/* Used for reciprocal division/mod functions
+ * It cannot be shared between threads
+ */
+struct bn_recp_ctx_st
+	{
+	BIGNUM N;	/* the divisor */
+	BIGNUM Nr;	/* the reciprocal */
+	int num_bits;
+	int shift;
+	int flags;
+	};
+
+/* Used for slow "generation" functions. */
+struct bn_gencb_st
+	{
+	unsigned int ver;	/* To handle binary (in)compatibility */
+	void *arg;		/* callback-specific data */
+	union
+		{
+		/* if(ver==1) - handles old style callbacks */
+		void (*cb_1)(int, int, void *);
+		/* if(ver==2) - new callback style */
+		int (*cb_2)(int, int, BN_GENCB *);
+		} cb;
+	};
+/* Wrapper function to make using BN_GENCB easier,  */
+int BN_GENCB_call(BN_GENCB *cb, int a, int b);
+/* Macro to populate a BN_GENCB structure with an "old"-style callback */
+#define BN_GENCB_set_old(gencb, callback, cb_arg) { \
+		BN_GENCB *tmp_gencb = (gencb); \
+		tmp_gencb->ver = 1; \
+		tmp_gencb->arg = (cb_arg); \
+		tmp_gencb->cb.cb_1 = (callback); }
+/* Macro to populate a BN_GENCB structure with a "new"-style callback */
+#define BN_GENCB_set(gencb, callback, cb_arg) { \
+		BN_GENCB *tmp_gencb = (gencb); \
+		tmp_gencb->ver = 2; \
+		tmp_gencb->arg = (cb_arg); \
+		tmp_gencb->cb.cb_2 = (callback); }
+
+#define BN_prime_checks 0 /* default: select number of iterations
+			     based on the size of the number */
+
+/* number of Miller-Rabin iterations for an error rate  of less than 2^-80
+ * for random 'b'-bit input, b >= 100 (taken from table 4.4 in the Handbook
+ * of Applied Cryptography [Menezes, van Oorschot, Vanstone; CRC Press 1996];
+ * original paper: Damgaard, Landrock, Pomerance: Average case error estimates
+ * for the strong probable prime test. -- Math. Comp. 61 (1993) 177-194) */
+#define BN_prime_checks_for_size(b) ((b) >= 1300 ?  2 : \
+                                (b) >=  850 ?  3 : \
+                                (b) >=  650 ?  4 : \
+                                (b) >=  550 ?  5 : \
+                                (b) >=  450 ?  6 : \
+                                (b) >=  400 ?  7 : \
+                                (b) >=  350 ?  8 : \
+                                (b) >=  300 ?  9 : \
+                                (b) >=  250 ? 12 : \
+                                (b) >=  200 ? 15 : \
+                                (b) >=  150 ? 18 : \
+                                /* b >= 100 */ 27)
+
+#define BN_num_bytes(a)	((BN_num_bits(a)+7)/8)
+
+/* Note that BN_abs_is_word didn't work reliably for w == 0 until 0.9.8 */
+#define BN_abs_is_word(a,w) ((((a)->top == 1) && ((a)->d[0] == (BN_ULONG)(w))) || \
+				(((w) == 0) && ((a)->top == 0)))
+#define BN_is_zero(a)       ((a)->top == 0)
+#define BN_is_one(a)        (BN_abs_is_word((a),1) && !(a)->neg)
+#define BN_is_word(a,w)     (BN_abs_is_word((a),(w)) && (!(w) || !(a)->neg))
+#define BN_is_odd(a)	    (((a)->top > 0) && ((a)->d[0] & 1))
+
+#define BN_one(a)	(BN_set_word((a),1))
+#define BN_zero_ex(a) \
+	do { \
+		BIGNUM *_tmp_bn = (a); \
+		_tmp_bn->top = 0; \
+		_tmp_bn->neg = 0; \
+	} while(0)
+#ifdef OPENSSL_NO_DEPRECATED
+#define BN_zero(a)	BN_zero_ex(a)
+#else
+#define BN_zero(a)	(BN_set_word((a),0))
+#endif
+
+const BIGNUM *BN_value_one(void);
+char *	BN_options(void);
+BN_CTX *BN_CTX_new(void);
+#ifndef OPENSSL_NO_DEPRECATED
+void	BN_CTX_init(BN_CTX *c);
+#endif
+void	BN_CTX_free(BN_CTX *c);
+void	BN_CTX_start(BN_CTX *ctx);
+BIGNUM *BN_CTX_get(BN_CTX *ctx);
+void	BN_CTX_end(BN_CTX *ctx);
+int     BN_rand(BIGNUM *rnd, int bits, int top,int bottom);
+int     BN_pseudo_rand(BIGNUM *rnd, int bits, int top,int bottom);
+int	BN_rand_range(BIGNUM *rnd, const BIGNUM *range);
+int	BN_pseudo_rand_range(BIGNUM *rnd, const BIGNUM *range);
+int	BN_num_bits(const BIGNUM *a);
+int	BN_num_bits_word(BN_ULONG);
+BIGNUM *BN_new(void);
+void	BN_init(BIGNUM *);
+void	BN_clear_free(BIGNUM *a);
+BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b);
+void	BN_swap(BIGNUM *a, BIGNUM *b);
+BIGNUM *BN_bin2bn(const unsigned char *s,int len,BIGNUM *ret);
+int	BN_bn2bin(const BIGNUM *a, unsigned char *to);
+BIGNUM *BN_mpi2bn(const unsigned char *s,int len,BIGNUM *ret);
+int	BN_bn2mpi(const BIGNUM *a, unsigned char *to);
+int	BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
+int	BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
+int	BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
+int	BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
+int	BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
+int	BN_sqr(BIGNUM *r, const BIGNUM *a,BN_CTX *ctx);
+/** BN_set_negative sets sign of a BIGNUM
+ * \param  b  pointer to the BIGNUM object
+ * \param  n  0 if the BIGNUM b should be positive and a value != 0 otherwise 
+ */
+void	BN_set_negative(BIGNUM *b, int n);
+/** BN_is_negative returns 1 if the BIGNUM is negative
+ * \param  a  pointer to the BIGNUM object
+ * \return 1 if a < 0 and 0 otherwise
+ */
+#define BN_is_negative(a) ((a)->neg != 0)
+
+int	BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
+	BN_CTX *ctx);
+#define BN_mod(rem,m,d,ctx) BN_div(NULL,(rem),(m),(d),(ctx))
+int	BN_nnmod(BIGNUM *r, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx);
+int	BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx);
+int	BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m);
+int	BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx);
+int	BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m);
+int	BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+	const BIGNUM *m, BN_CTX *ctx);
+int	BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx);
+int	BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx);
+int	BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *m);
+int	BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m, BN_CTX *ctx);
+int	BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m);
+
+BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w);
+BN_ULONG BN_div_word(BIGNUM *a, BN_ULONG w);
+int	BN_mul_word(BIGNUM *a, BN_ULONG w);
+int	BN_add_word(BIGNUM *a, BN_ULONG w);
+int	BN_sub_word(BIGNUM *a, BN_ULONG w);
+int	BN_set_word(BIGNUM *a, BN_ULONG w);
+BN_ULONG BN_get_word(const BIGNUM *a);
+
+int	BN_cmp(const BIGNUM *a, const BIGNUM *b);
+void	BN_free(BIGNUM *a);
+int	BN_is_bit_set(const BIGNUM *a, int n);
+int	BN_lshift(BIGNUM *r, const BIGNUM *a, int n);
+int	BN_lshift1(BIGNUM *r, const BIGNUM *a);
+int	BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,BN_CTX *ctx);
+
+int	BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+	const BIGNUM *m,BN_CTX *ctx);
+int	BN_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
+int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
+	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont);
+int	BN_mod_exp_mont_word(BIGNUM *r, BN_ULONG a, const BIGNUM *p,
+	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
+int	BN_mod_exp2_mont(BIGNUM *r, const BIGNUM *a1, const BIGNUM *p1,
+	const BIGNUM *a2, const BIGNUM *p2,const BIGNUM *m,
+	BN_CTX *ctx,BN_MONT_CTX *m_ctx);
+int	BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+	const BIGNUM *m,BN_CTX *ctx);
+
+int	BN_mask_bits(BIGNUM *a,int n);
+#ifndef OPENSSL_NO_FP_API
+int	BN_print_fp(FILE *fp, const BIGNUM *a);
+#endif
+#ifdef HEADER_BIO_H
+int	BN_print(BIO *fp, const BIGNUM *a);
+#else
+int	BN_print(void *fp, const BIGNUM *a);
+#endif
+int	BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx);
+int	BN_rshift(BIGNUM *r, const BIGNUM *a, int n);
+int	BN_rshift1(BIGNUM *r, const BIGNUM *a);
+void	BN_clear(BIGNUM *a);
+BIGNUM *BN_dup(const BIGNUM *a);
+int	BN_ucmp(const BIGNUM *a, const BIGNUM *b);
+int	BN_set_bit(BIGNUM *a, int n);
+int	BN_clear_bit(BIGNUM *a, int n);
+char *	BN_bn2hex(const BIGNUM *a);
+char *	BN_bn2dec(const BIGNUM *a);
+int 	BN_hex2bn(BIGNUM **a, const char *str);
+int 	BN_dec2bn(BIGNUM **a, const char *str);
+int	BN_asc2bn(BIGNUM **a, const char *str);
+int	BN_gcd(BIGNUM *r,const BIGNUM *a,const BIGNUM *b,BN_CTX *ctx);
+int	BN_kronecker(const BIGNUM *a,const BIGNUM *b,BN_CTX *ctx); /* returns -2 for error */
+BIGNUM *BN_mod_inverse(BIGNUM *ret,
+	const BIGNUM *a, const BIGNUM *n,BN_CTX *ctx);
+BIGNUM *BN_mod_sqrt(BIGNUM *ret,
+	const BIGNUM *a, const BIGNUM *n,BN_CTX *ctx);
+
+/* Deprecated versions */
+#ifndef OPENSSL_NO_DEPRECATED
+BIGNUM *BN_generate_prime(BIGNUM *ret,int bits,int safe,
+	const BIGNUM *add, const BIGNUM *rem,
+	void (*callback)(int,int,void *),void *cb_arg);
+int	BN_is_prime(const BIGNUM *p,int nchecks,
+	void (*callback)(int,int,void *),
+	BN_CTX *ctx,void *cb_arg);
+int	BN_is_prime_fasttest(const BIGNUM *p,int nchecks,
+	void (*callback)(int,int,void *),BN_CTX *ctx,void *cb_arg,
+	int do_trial_division);
+#endif /* !defined(OPENSSL_NO_DEPRECATED) */
+
+/* Newer versions */
+int	BN_generate_prime_ex(BIGNUM *ret,int bits,int safe, const BIGNUM *add,
+		const BIGNUM *rem, BN_GENCB *cb);
+int	BN_is_prime_ex(const BIGNUM *p,int nchecks, BN_CTX *ctx, BN_GENCB *cb);
+int	BN_is_prime_fasttest_ex(const BIGNUM *p,int nchecks, BN_CTX *ctx,
+		int do_trial_division, BN_GENCB *cb);
+
+BN_MONT_CTX *BN_MONT_CTX_new(void );
+void BN_MONT_CTX_init(BN_MONT_CTX *ctx);
+int BN_mod_mul_montgomery(BIGNUM *r,const BIGNUM *a,const BIGNUM *b,
+	BN_MONT_CTX *mont, BN_CTX *ctx);
+#define BN_to_montgomery(r,a,mont,ctx)	BN_mod_mul_montgomery(\
+	(r),(a),&((mont)->RR),(mont),(ctx))
+int BN_from_montgomery(BIGNUM *r,const BIGNUM *a,
+	BN_MONT_CTX *mont, BN_CTX *ctx);
+void BN_MONT_CTX_free(BN_MONT_CTX *mont);
+int BN_MONT_CTX_set(BN_MONT_CTX *mont,const BIGNUM *mod,BN_CTX *ctx);
+BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to,BN_MONT_CTX *from);
+BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock,
+					const BIGNUM *mod, BN_CTX *ctx);
+
+/* BN_BLINDING flags */
+#define	BN_BLINDING_NO_UPDATE	0x00000001
+#define	BN_BLINDING_NO_RECREATE	0x00000002
+
+BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod);
+void BN_BLINDING_free(BN_BLINDING *b);
+int BN_BLINDING_update(BN_BLINDING *b,BN_CTX *ctx);
+int BN_BLINDING_convert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx);
+int BN_BLINDING_invert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx);
+int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *);
+int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b, BN_CTX *);
+#ifndef OPENSSL_NO_DEPRECATED
+unsigned long BN_BLINDING_get_thread_id(const BN_BLINDING *);
+void BN_BLINDING_set_thread_id(BN_BLINDING *, unsigned long);
+#endif
+CRYPTO_THREADID *BN_BLINDING_thread_id(BN_BLINDING *);
+unsigned long BN_BLINDING_get_flags(const BN_BLINDING *);
+void BN_BLINDING_set_flags(BN_BLINDING *, unsigned long);
+BN_BLINDING *BN_BLINDING_create_param(BN_BLINDING *b,
+	const BIGNUM *e, BIGNUM *m, BN_CTX *ctx,
+	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+			  const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx),
+	BN_MONT_CTX *m_ctx);
+
+#ifndef OPENSSL_NO_DEPRECATED
+void BN_set_params(int mul,int high,int low,int mont);
+int BN_get_params(int which); /* 0, mul, 1 high, 2 low, 3 mont */
+#endif
+
+void	BN_RECP_CTX_init(BN_RECP_CTX *recp);
+BN_RECP_CTX *BN_RECP_CTX_new(void);
+void	BN_RECP_CTX_free(BN_RECP_CTX *recp);
+int	BN_RECP_CTX_set(BN_RECP_CTX *recp,const BIGNUM *rdiv,BN_CTX *ctx);
+int	BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y,
+	BN_RECP_CTX *recp,BN_CTX *ctx);
+int	BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+	const BIGNUM *m, BN_CTX *ctx);
+int	BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m,
+	BN_RECP_CTX *recp, BN_CTX *ctx);
+
+/* Functions for arithmetic over binary polynomials represented by BIGNUMs. 
+ *
+ * The BIGNUM::neg property of BIGNUMs representing binary polynomials is
+ * ignored.
+ *
+ * Note that input arguments are not const so that their bit arrays can
+ * be expanded to the appropriate size if needed.
+ */
+
+int	BN_GF2m_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b); /*r = a + b*/
+#define BN_GF2m_sub(r, a, b) BN_GF2m_add(r, a, b)
+int	BN_GF2m_mod(BIGNUM *r, const BIGNUM *a, const BIGNUM *p); /*r=a mod p*/
+int	BN_GF2m_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+	const BIGNUM *p, BN_CTX *ctx); /* r = (a * b) mod p */
+int	BN_GF2m_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+	BN_CTX *ctx); /* r = (a * a) mod p */
+int	BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *b, const BIGNUM *p,
+	BN_CTX *ctx); /* r = (1 / b) mod p */
+int	BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+	const BIGNUM *p, BN_CTX *ctx); /* r = (a / b) mod p */
+int	BN_GF2m_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+	const BIGNUM *p, BN_CTX *ctx); /* r = (a ^ b) mod p */
+int	BN_GF2m_mod_sqrt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+	BN_CTX *ctx); /* r = sqrt(a) mod p */
+int	BN_GF2m_mod_solve_quad(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+	BN_CTX *ctx); /* r^2 + r = a mod p */
+#define BN_GF2m_cmp(a, b) BN_ucmp((a), (b))
+/* Some functions allow for representation of the irreducible polynomials
+ * as an unsigned int[], say p.  The irreducible f(t) is then of the form:
+ *     t^p[0] + t^p[1] + ... + t^p[k]
+ * where m = p[0] > p[1] > ... > p[k] = 0.
+ */
+int	BN_GF2m_mod_arr(BIGNUM *r, const BIGNUM *a, const int p[]);
+	/* r = a mod p */
+int	BN_GF2m_mod_mul_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+	const int p[], BN_CTX *ctx); /* r = (a * b) mod p */
+int	BN_GF2m_mod_sqr_arr(BIGNUM *r, const BIGNUM *a, const int p[],
+	BN_CTX *ctx); /* r = (a * a) mod p */
+int	BN_GF2m_mod_inv_arr(BIGNUM *r, const BIGNUM *b, const int p[],
+	BN_CTX *ctx); /* r = (1 / b) mod p */
+int	BN_GF2m_mod_div_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+	const int p[], BN_CTX *ctx); /* r = (a / b) mod p */
+int	BN_GF2m_mod_exp_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+	const int p[], BN_CTX *ctx); /* r = (a ^ b) mod p */
+int	BN_GF2m_mod_sqrt_arr(BIGNUM *r, const BIGNUM *a,
+	const int p[], BN_CTX *ctx); /* r = sqrt(a) mod p */
+int	BN_GF2m_mod_solve_quad_arr(BIGNUM *r, const BIGNUM *a,
+	const int p[], BN_CTX *ctx); /* r^2 + r = a mod p */
+int	BN_GF2m_poly2arr(const BIGNUM *a, int p[], int max);
+int	BN_GF2m_arr2poly(const int p[], BIGNUM *a);
+
+/* faster mod functions for the 'NIST primes' 
+ * 0 <= a < p^2 */
+int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
+int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
+int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
+int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
+int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
+
+const BIGNUM *BN_get0_nist_prime_192(void);
+const BIGNUM *BN_get0_nist_prime_224(void);
+const BIGNUM *BN_get0_nist_prime_256(void);
+const BIGNUM *BN_get0_nist_prime_384(void);
+const BIGNUM *BN_get0_nist_prime_521(void);
+
+/* library internal functions */
+
+#define bn_expand(a,bits) ((((((bits+BN_BITS2-1))/BN_BITS2)) <= (a)->dmax)?\
+	(a):bn_expand2((a),(bits+BN_BITS2-1)/BN_BITS2))
+#define bn_wexpand(a,words) (((words) <= (a)->dmax)?(a):bn_expand2((a),(words)))
+BIGNUM *bn_expand2(BIGNUM *a, int words);
+#ifndef OPENSSL_NO_DEPRECATED
+BIGNUM *bn_dup_expand(const BIGNUM *a, int words); /* unused */
+#endif
+
+/* Bignum consistency macros
+ * There is one "API" macro, bn_fix_top(), for stripping leading zeroes from
+ * bignum data after direct manipulations on the data. There is also an
+ * "internal" macro, bn_check_top(), for verifying that there are no leading
+ * zeroes. Unfortunately, some auditing is required due to the fact that
+ * bn_fix_top() has become an overabused duct-tape because bignum data is
+ * occasionally passed around in an inconsistent state. So the following
+ * changes have been made to sort this out;
+ * - bn_fix_top()s implementation has been moved to bn_correct_top()
+ * - if BN_DEBUG isn't defined, bn_fix_top() maps to bn_correct_top(), and
+ *   bn_check_top() is as before.
+ * - if BN_DEBUG *is* defined;
+ *   - bn_check_top() tries to pollute unused words even if the bignum 'top' is
+ *     consistent. (ed: only if BN_DEBUG_RAND is defined)
+ *   - bn_fix_top() maps to bn_check_top() rather than "fixing" anything.
+ * The idea is to have debug builds flag up inconsistent bignums when they
+ * occur. If that occurs in a bn_fix_top(), we examine the code in question; if
+ * the use of bn_fix_top() was appropriate (ie. it follows directly after code
+ * that manipulates the bignum) it is converted to bn_correct_top(), and if it
+ * was not appropriate, we convert it permanently to bn_check_top() and track
+ * down the cause of the bug. Eventually, no internal code should be using the
+ * bn_fix_top() macro. External applications and libraries should try this with
+ * their own code too, both in terms of building against the openssl headers
+ * with BN_DEBUG defined *and* linking with a version of OpenSSL built with it
+ * defined. This not only improves external code, it provides more test
+ * coverage for openssl's own code.
+ */
+
+#ifdef BN_DEBUG
+
+/* We only need assert() when debugging */
+#include <assert.h>
+
+#ifdef BN_DEBUG_RAND
+/* To avoid "make update" cvs wars due to BN_DEBUG, use some tricks */
+#ifndef RAND_pseudo_bytes
+int RAND_pseudo_bytes(unsigned char *buf,int num);
+#define BN_DEBUG_TRIX
+#endif
+#define bn_pollute(a) \
+	do { \
+		const BIGNUM *_bnum1 = (a); \
+		if(_bnum1->top < _bnum1->dmax) { \
+			unsigned char _tmp_char; \
+			/* We cast away const without the compiler knowing, any \
+			 * *genuinely* constant variables that aren't mutable \
+			 * wouldn't be constructed with top!=dmax. */ \
+			BN_ULONG *_not_const; \
+			memcpy(&_not_const, &_bnum1->d, sizeof(BN_ULONG*)); \
+			RAND_pseudo_bytes(&_tmp_char, 1); \
+			memset((unsigned char *)(_not_const + _bnum1->top), _tmp_char, \
+				(_bnum1->dmax - _bnum1->top) * sizeof(BN_ULONG)); \
+		} \
+	} while(0)
+#ifdef BN_DEBUG_TRIX
+#undef RAND_pseudo_bytes
+#endif
+#else
+#define bn_pollute(a)
+#endif
+#define bn_check_top(a) \
+	do { \
+		const BIGNUM *_bnum2 = (a); \
+		if (_bnum2 != NULL) { \
+			assert((_bnum2->top == 0) || \
+				(_bnum2->d[_bnum2->top - 1] != 0)); \
+			bn_pollute(_bnum2); \
+		} \
+	} while(0)
+
+#define bn_fix_top(a)		bn_check_top(a)
+
+#else /* !BN_DEBUG */
+
+#define bn_pollute(a)
+#define bn_check_top(a)
+#define bn_fix_top(a)		bn_correct_top(a)
+
+#endif
+
+#define bn_correct_top(a) \
+        { \
+        BN_ULONG *ftl; \
+	int tmp_top = (a)->top; \
+	if (tmp_top > 0) \
+		{ \
+		for (ftl= &((a)->d[tmp_top-1]); tmp_top > 0; tmp_top--) \
+			if (*(ftl--)) break; \
+		(a)->top = tmp_top; \
+		} \
+	bn_pollute(a); \
+	}
+
+BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w);
+BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w);
+void     bn_sqr_words(BN_ULONG *rp, const BN_ULONG *ap, int num);
+BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d);
+BN_ULONG bn_add_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num);
+BN_ULONG bn_sub_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num);
+
+/* Primes from RFC 2409 */
+BIGNUM *get_rfc2409_prime_768(BIGNUM *bn);
+BIGNUM *get_rfc2409_prime_1024(BIGNUM *bn);
+
+/* Primes from RFC 3526 */
+BIGNUM *get_rfc3526_prime_1536(BIGNUM *bn);
+BIGNUM *get_rfc3526_prime_2048(BIGNUM *bn);
+BIGNUM *get_rfc3526_prime_3072(BIGNUM *bn);
+BIGNUM *get_rfc3526_prime_4096(BIGNUM *bn);
+BIGNUM *get_rfc3526_prime_6144(BIGNUM *bn);
+BIGNUM *get_rfc3526_prime_8192(BIGNUM *bn);
+
+int BN_bntest_rand(BIGNUM *rnd, int bits, int top,int bottom);
+
+/* BEGIN ERROR CODES */
+/* The following lines are auto generated by the script mkerr.pl. Any changes
+ * made after this point may be overwritten when the script is next run.
+ */
+void ERR_load_BN_strings(void);
+
+/* Error codes for the BN functions. */
+
+/* Function codes. */
+#define BN_F_BNRAND					 127
+#define BN_F_BN_BLINDING_CONVERT_EX			 100
+#define BN_F_BN_BLINDING_CREATE_PARAM			 128
+#define BN_F_BN_BLINDING_INVERT_EX			 101
+#define BN_F_BN_BLINDING_NEW				 102
+#define BN_F_BN_BLINDING_UPDATE				 103
+#define BN_F_BN_BN2DEC					 104
+#define BN_F_BN_BN2HEX					 105
+#define BN_F_BN_CTX_GET					 116
+#define BN_F_BN_CTX_NEW					 106
+#define BN_F_BN_CTX_START				 129
+#define BN_F_BN_DIV					 107
+#define BN_F_BN_DIV_NO_BRANCH				 138
+#define BN_F_BN_DIV_RECP				 130
+#define BN_F_BN_EXP					 123
+#define BN_F_BN_EXPAND2					 108
+#define BN_F_BN_EXPAND_INTERNAL				 120
+#define BN_F_BN_GF2M_MOD				 131
+#define BN_F_BN_GF2M_MOD_EXP				 132
+#define BN_F_BN_GF2M_MOD_MUL				 133
+#define BN_F_BN_GF2M_MOD_SOLVE_QUAD			 134
+#define BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR			 135
+#define BN_F_BN_GF2M_MOD_SQR				 136
+#define BN_F_BN_GF2M_MOD_SQRT				 137
+#define BN_F_BN_MOD_EXP2_MONT				 118
+#define BN_F_BN_MOD_EXP_MONT				 109
+#define BN_F_BN_MOD_EXP_MONT_CONSTTIME			 124
+#define BN_F_BN_MOD_EXP_MONT_WORD			 117
+#define BN_F_BN_MOD_EXP_RECP				 125
+#define BN_F_BN_MOD_EXP_SIMPLE				 126
+#define BN_F_BN_MOD_INVERSE				 110
+#define BN_F_BN_MOD_INVERSE_NO_BRANCH			 139
+#define BN_F_BN_MOD_LSHIFT_QUICK			 119
+#define BN_F_BN_MOD_MUL_RECIPROCAL			 111
+#define BN_F_BN_MOD_SQRT				 121
+#define BN_F_BN_MPI2BN					 112
+#define BN_F_BN_NEW					 113
+#define BN_F_BN_RAND					 114
+#define BN_F_BN_RAND_RANGE				 122
+#define BN_F_BN_USUB					 115
+
+/* Reason codes. */
+#define BN_R_ARG2_LT_ARG3				 100
+#define BN_R_BAD_RECIPROCAL				 101
+#define BN_R_BIGNUM_TOO_LONG				 114
+#define BN_R_CALLED_WITH_EVEN_MODULUS			 102
+#define BN_R_DIV_BY_ZERO				 103
+#define BN_R_ENCODING_ERROR				 104
+#define BN_R_EXPAND_ON_STATIC_BIGNUM_DATA		 105
+#define BN_R_INPUT_NOT_REDUCED				 110
+#define BN_R_INVALID_LENGTH				 106
+#define BN_R_INVALID_RANGE				 115
+#define BN_R_NOT_A_SQUARE				 111
+#define BN_R_NOT_INITIALIZED				 107
+#define BN_R_NO_INVERSE					 108
+#define BN_R_NO_SOLUTION				 116
+#define BN_R_P_IS_NOT_PRIME				 112
+#define BN_R_TOO_MANY_ITERATIONS			 113
+#define BN_R_TOO_MANY_TEMPORARY_VARIABLES		 109
+
+#ifdef  __cplusplus
+}
+#endif
+#endif
diff --git a/app/openssl/crypto/bn/bn.mul b/app/openssl/crypto/bn/bn.mul
new file mode 100644
index 00000000..9728870d
--- /dev/null
+++ b/app/openssl/crypto/bn/bn.mul
@@ -0,0 +1,19 @@
+We need
+
+* bn_mul_comba8
+* bn_mul_comba4
+* bn_mul_normal
+* bn_mul_recursive
+
+* bn_sqr_comba8
+* bn_sqr_comba4
+bn_sqr_normal -> BN_sqr
+* bn_sqr_recursive
+
+* bn_mul_low_recursive
+* bn_mul_low_normal
+* bn_mul_high
+
+* bn_mul_part_recursive	# symetric but not power of 2
+
+bn_mul_asymetric_recursive # uneven, but do the chop up.
diff --git a/app/openssl/crypto/bn/bn_add.c b/app/openssl/crypto/bn/bn_add.c
new file mode 100644
index 00000000..94051637
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_add.c
@@ -0,0 +1,313 @@
+/* crypto/bn/bn_add.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+/* r can == a or b */
+int BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
+	{
+	const BIGNUM *tmp;
+	int a_neg = a->neg, ret;
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	/*  a +  b	a+b
+	 *  a + -b	a-b
+	 * -a +  b	b-a
+	 * -a + -b	-(a+b)
+	 */
+	if (a_neg ^ b->neg)
+		{
+		/* only one is negative */
+		if (a_neg)
+			{ tmp=a; a=b; b=tmp; }
+
+		/* we are now a - b */
+
+		if (BN_ucmp(a,b) < 0)
+			{
+			if (!BN_usub(r,b,a)) return(0);
+			r->neg=1;
+			}
+		else
+			{
+			if (!BN_usub(r,a,b)) return(0);
+			r->neg=0;
+			}
+		return(1);
+		}
+
+	ret = BN_uadd(r,a,b);
+	r->neg = a_neg;
+	bn_check_top(r);
+	return ret;
+	}
+
+/* unsigned add of b to a */
+int BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
+	{
+	int max,min,dif;
+	BN_ULONG *ap,*bp,*rp,carry,t1,t2;
+	const BIGNUM *tmp;
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	if (a->top < b->top)
+		{ tmp=a; a=b; b=tmp; }
+	max = a->top;
+	min = b->top;
+	dif = max - min;
+
+	if (bn_wexpand(r,max+1) == NULL)
+		return 0;
+
+	r->top=max;
+
+
+	ap=a->d;
+	bp=b->d;
+	rp=r->d;
+
+	carry=bn_add_words(rp,ap,bp,min);
+	rp+=min;
+	ap+=min;
+	bp+=min;
+
+	if (carry)
+		{
+		while (dif)
+			{
+			dif--;
+			t1 = *(ap++);
+			t2 = (t1+1) & BN_MASK2;
+			*(rp++) = t2;
+			if (t2)
+				{
+				carry=0;
+				break;
+				}
+			}
+		if (carry)
+			{
+			/* carry != 0 => dif == 0 */
+			*rp = 1;
+			r->top++;
+			}
+		}
+	if (dif && rp != ap)
+		while (dif--)
+			/* copy remaining words if ap != rp */
+			*(rp++) = *(ap++);
+	r->neg = 0;
+	bn_check_top(r);
+	return 1;
+	}
+
+/* unsigned subtraction of b from a, a must be larger than b. */
+int BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
+	{
+	int max,min,dif;
+	register BN_ULONG t1,t2,*ap,*bp,*rp;
+	int i,carry;
+#if defined(IRIX_CC_BUG) && !defined(LINT)
+	int dummy;
+#endif
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	max = a->top;
+	min = b->top;
+	dif = max - min;
+
+	if (dif < 0)	/* hmm... should not be happening */
+		{
+		BNerr(BN_F_BN_USUB,BN_R_ARG2_LT_ARG3);
+		return(0);
+		}
+
+	if (bn_wexpand(r,max) == NULL) return(0);
+
+	ap=a->d;
+	bp=b->d;
+	rp=r->d;
+
+#if 1
+	carry=0;
+	for (i = min; i != 0; i--)
+		{
+		t1= *(ap++);
+		t2= *(bp++);
+		if (carry)
+			{
+			carry=(t1 <= t2);
+			t1=(t1-t2-1)&BN_MASK2;
+			}
+		else
+			{
+			carry=(t1 < t2);
+			t1=(t1-t2)&BN_MASK2;
+			}
+#if defined(IRIX_CC_BUG) && !defined(LINT)
+		dummy=t1;
+#endif
+		*(rp++)=t1&BN_MASK2;
+		}
+#else
+	carry=bn_sub_words(rp,ap,bp,min);
+	ap+=min;
+	bp+=min;
+	rp+=min;
+#endif
+	if (carry) /* subtracted */
+		{
+		if (!dif)
+			/* error: a < b */
+			return 0;
+		while (dif)
+			{
+			dif--;
+			t1 = *(ap++);
+			t2 = (t1-1)&BN_MASK2;
+			*(rp++) = t2;
+			if (t1)
+				break;
+			}
+		}
+#if 0
+	memcpy(rp,ap,sizeof(*rp)*(max-i));
+#else
+	if (rp != ap)
+		{
+		for (;;)
+			{
+			if (!dif--) break;
+			rp[0]=ap[0];
+			if (!dif--) break;
+			rp[1]=ap[1];
+			if (!dif--) break;
+			rp[2]=ap[2];
+			if (!dif--) break;
+			rp[3]=ap[3];
+			rp+=4;
+			ap+=4;
+			}
+		}
+#endif
+
+	r->top=max;
+	r->neg=0;
+	bn_correct_top(r);
+	return(1);
+	}
+
+int BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
+	{
+	int max;
+	int add=0,neg=0;
+	const BIGNUM *tmp;
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	/*  a -  b	a-b
+	 *  a - -b	a+b
+	 * -a -  b	-(a+b)
+	 * -a - -b	b-a
+	 */
+	if (a->neg)
+		{
+		if (b->neg)
+			{ tmp=a; a=b; b=tmp; }
+		else
+			{ add=1; neg=1; }
+		}
+	else
+		{
+		if (b->neg) { add=1; neg=0; }
+		}
+
+	if (add)
+		{
+		if (!BN_uadd(r,a,b)) return(0);
+		r->neg=neg;
+		return(1);
+		}
+
+	/* We are actually doing a - b :-) */
+
+	max=(a->top > b->top)?a->top:b->top;
+	if (bn_wexpand(r,max) == NULL) return(0);
+	if (BN_ucmp(a,b) < 0)
+		{
+		if (!BN_usub(r,b,a)) return(0);
+		r->neg=1;
+		}
+	else
+		{
+		if (!BN_usub(r,a,b)) return(0);
+		r->neg=0;
+		}
+	bn_check_top(r);
+	return(1);
+	}
+
diff --git a/app/openssl/crypto/bn/bn_asm.c b/app/openssl/crypto/bn/bn_asm.c
new file mode 100644
index 00000000..c43c91cc
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_asm.c
@@ -0,0 +1,1030 @@
+/* crypto/bn/bn_asm.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef BN_DEBUG
+# undef NDEBUG /* avoid conflicting definitions */
+# define NDEBUG
+#endif
+
+#include <stdio.h>
+#include <assert.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+#if defined(BN_LLONG) || defined(BN_UMULT_HIGH)
+
+BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG c1=0;
+
+	assert(num >= 0);
+	if (num <= 0) return(c1);
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (num&~3)
+		{
+		mul_add(rp[0],ap[0],w,c1);
+		mul_add(rp[1],ap[1],w,c1);
+		mul_add(rp[2],ap[2],w,c1);
+		mul_add(rp[3],ap[3],w,c1);
+		ap+=4; rp+=4; num-=4;
+		}
+#endif
+	while (num)
+		{
+		mul_add(rp[0],ap[0],w,c1);
+		ap++; rp++; num--;
+		}
+	
+	return(c1);
+	} 
+
+BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG c1=0;
+
+	assert(num >= 0);
+	if (num <= 0) return(c1);
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (num&~3)
+		{
+		mul(rp[0],ap[0],w,c1);
+		mul(rp[1],ap[1],w,c1);
+		mul(rp[2],ap[2],w,c1);
+		mul(rp[3],ap[3],w,c1);
+		ap+=4; rp+=4; num-=4;
+		}
+#endif
+	while (num)
+		{
+		mul(rp[0],ap[0],w,c1);
+		ap++; rp++; num--;
+		}
+	return(c1);
+	} 
+
+void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n)
+        {
+	assert(n >= 0);
+	if (n <= 0) return;
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (n&~3)
+		{
+		sqr(r[0],r[1],a[0]);
+		sqr(r[2],r[3],a[1]);
+		sqr(r[4],r[5],a[2]);
+		sqr(r[6],r[7],a[3]);
+		a+=4; r+=8; n-=4;
+		}
+#endif
+	while (n)
+		{
+		sqr(r[0],r[1],a[0]);
+		a++; r+=2; n--;
+		}
+	}
+
+#else /* !(defined(BN_LLONG) || defined(BN_UMULT_HIGH)) */
+
+BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG c=0;
+	BN_ULONG bl,bh;
+
+	assert(num >= 0);
+	if (num <= 0) return((BN_ULONG)0);
+
+	bl=LBITS(w);
+	bh=HBITS(w);
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (num&~3)
+		{
+		mul_add(rp[0],ap[0],bl,bh,c);
+		mul_add(rp[1],ap[1],bl,bh,c);
+		mul_add(rp[2],ap[2],bl,bh,c);
+		mul_add(rp[3],ap[3],bl,bh,c);
+		ap+=4; rp+=4; num-=4;
+		}
+#endif
+	while (num)
+		{
+		mul_add(rp[0],ap[0],bl,bh,c);
+		ap++; rp++; num--;
+		}
+	return(c);
+	} 
+
+BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
+	{
+	BN_ULONG carry=0;
+	BN_ULONG bl,bh;
+
+	assert(num >= 0);
+	if (num <= 0) return((BN_ULONG)0);
+
+	bl=LBITS(w);
+	bh=HBITS(w);
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (num&~3)
+		{
+		mul(rp[0],ap[0],bl,bh,carry);
+		mul(rp[1],ap[1],bl,bh,carry);
+		mul(rp[2],ap[2],bl,bh,carry);
+		mul(rp[3],ap[3],bl,bh,carry);
+		ap+=4; rp+=4; num-=4;
+		}
+#endif
+	while (num)
+		{
+		mul(rp[0],ap[0],bl,bh,carry);
+		ap++; rp++; num--;
+		}
+	return(carry);
+	} 
+
+void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n)
+        {
+	assert(n >= 0);
+	if (n <= 0) return;
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (n&~3)
+		{
+		sqr64(r[0],r[1],a[0]);
+		sqr64(r[2],r[3],a[1]);
+		sqr64(r[4],r[5],a[2]);
+		sqr64(r[6],r[7],a[3]);
+		a+=4; r+=8; n-=4;
+		}
+#endif
+	while (n)
+		{
+		sqr64(r[0],r[1],a[0]);
+		a++; r+=2; n--;
+		}
+	}
+
+#endif /* !(defined(BN_LLONG) || defined(BN_UMULT_HIGH)) */
+
+#if defined(BN_LLONG) && defined(BN_DIV2W)
+
+BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
+	{
+	return((BN_ULONG)(((((BN_ULLONG)h)<<BN_BITS2)|l)/(BN_ULLONG)d));
+	}
+
+#else
+
+/* Divide h,l by d and return the result. */
+/* I need to test this some more :-( */
+BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
+	{
+	BN_ULONG dh,dl,q,ret=0,th,tl,t;
+	int i,count=2;
+
+	if (d == 0) return(BN_MASK2);
+
+	i=BN_num_bits_word(d);
+	assert((i == BN_BITS2) || (h <= (BN_ULONG)1<<i));
+
+	i=BN_BITS2-i;
+	if (h >= d) h-=d;
+
+	if (i)
+		{
+		d<<=i;
+		h=(h<<i)|(l>>(BN_BITS2-i));
+		l<<=i;
+		}
+	dh=(d&BN_MASK2h)>>BN_BITS4;
+	dl=(d&BN_MASK2l);
+	for (;;)
+		{
+		if ((h>>BN_BITS4) == dh)
+			q=BN_MASK2l;
+		else
+			q=h/dh;
+
+		th=q*dh;
+		tl=dl*q;
+		for (;;)
+			{
+			t=h-th;
+			if ((t&BN_MASK2h) ||
+				((tl) <= (
+					(t<<BN_BITS4)|
+					((l&BN_MASK2h)>>BN_BITS4))))
+				break;
+			q--;
+			th-=dh;
+			tl-=dl;
+			}
+		t=(tl>>BN_BITS4);
+		tl=(tl<<BN_BITS4)&BN_MASK2h;
+		th+=t;
+
+		if (l < tl) th++;
+		l-=tl;
+		if (h < th)
+			{
+			h+=d;
+			q--;
+			}
+		h-=th;
+
+		if (--count == 0) break;
+
+		ret=q<<BN_BITS4;
+		h=((h<<BN_BITS4)|(l>>BN_BITS4))&BN_MASK2;
+		l=(l&BN_MASK2l)<<BN_BITS4;
+		}
+	ret|=q;
+	return(ret);
+	}
+#endif /* !defined(BN_LLONG) && defined(BN_DIV2W) */
+
+#ifdef BN_LLONG
+BN_ULONG bn_add_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n)
+        {
+	BN_ULLONG ll=0;
+
+	assert(n >= 0);
+	if (n <= 0) return((BN_ULONG)0);
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (n&~3)
+		{
+		ll+=(BN_ULLONG)a[0]+b[0];
+		r[0]=(BN_ULONG)ll&BN_MASK2;
+		ll>>=BN_BITS2;
+		ll+=(BN_ULLONG)a[1]+b[1];
+		r[1]=(BN_ULONG)ll&BN_MASK2;
+		ll>>=BN_BITS2;
+		ll+=(BN_ULLONG)a[2]+b[2];
+		r[2]=(BN_ULONG)ll&BN_MASK2;
+		ll>>=BN_BITS2;
+		ll+=(BN_ULLONG)a[3]+b[3];
+		r[3]=(BN_ULONG)ll&BN_MASK2;
+		ll>>=BN_BITS2;
+		a+=4; b+=4; r+=4; n-=4;
+		}
+#endif
+	while (n)
+		{
+		ll+=(BN_ULLONG)a[0]+b[0];
+		r[0]=(BN_ULONG)ll&BN_MASK2;
+		ll>>=BN_BITS2;
+		a++; b++; r++; n--;
+		}
+	return((BN_ULONG)ll);
+	}
+#else /* !BN_LLONG */
+BN_ULONG bn_add_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n)
+        {
+	BN_ULONG c,l,t;
+
+	assert(n >= 0);
+	if (n <= 0) return((BN_ULONG)0);
+
+	c=0;
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (n&~3)
+		{
+		t=a[0];
+		t=(t+c)&BN_MASK2;
+		c=(t < c);
+		l=(t+b[0])&BN_MASK2;
+		c+=(l < t);
+		r[0]=l;
+		t=a[1];
+		t=(t+c)&BN_MASK2;
+		c=(t < c);
+		l=(t+b[1])&BN_MASK2;
+		c+=(l < t);
+		r[1]=l;
+		t=a[2];
+		t=(t+c)&BN_MASK2;
+		c=(t < c);
+		l=(t+b[2])&BN_MASK2;
+		c+=(l < t);
+		r[2]=l;
+		t=a[3];
+		t=(t+c)&BN_MASK2;
+		c=(t < c);
+		l=(t+b[3])&BN_MASK2;
+		c+=(l < t);
+		r[3]=l;
+		a+=4; b+=4; r+=4; n-=4;
+		}
+#endif
+	while(n)
+		{
+		t=a[0];
+		t=(t+c)&BN_MASK2;
+		c=(t < c);
+		l=(t+b[0])&BN_MASK2;
+		c+=(l < t);
+		r[0]=l;
+		a++; b++; r++; n--;
+		}
+	return((BN_ULONG)c);
+	}
+#endif /* !BN_LLONG */
+
+BN_ULONG bn_sub_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n)
+        {
+	BN_ULONG t1,t2;
+	int c=0;
+
+	assert(n >= 0);
+	if (n <= 0) return((BN_ULONG)0);
+
+#ifndef OPENSSL_SMALL_FOOTPRINT
+	while (n&~3)
+		{
+		t1=a[0]; t2=b[0];
+		r[0]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		t1=a[1]; t2=b[1];
+		r[1]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		t1=a[2]; t2=b[2];
+		r[2]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		t1=a[3]; t2=b[3];
+		r[3]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		a+=4; b+=4; r+=4; n-=4;
+		}
+#endif
+	while (n)
+		{
+		t1=a[0]; t2=b[0];
+		r[0]=(t1-t2-c)&BN_MASK2;
+		if (t1 != t2) c=(t1 < t2);
+		a++; b++; r++; n--;
+		}
+	return(c);
+	}
+
+#if defined(BN_MUL_COMBA) && !defined(OPENSSL_SMALL_FOOTPRINT)
+
+#undef bn_mul_comba8
+#undef bn_mul_comba4
+#undef bn_sqr_comba8
+#undef bn_sqr_comba4
+
+/* mul_add_c(a,b,c0,c1,c2)  -- c+=a*b for three word number c=(c2,c1,c0) */
+/* mul_add_c2(a,b,c0,c1,c2) -- c+=2*a*b for three word number c=(c2,c1,c0) */
+/* sqr_add_c(a,i,c0,c1,c2)  -- c+=a[i]^2 for three word number c=(c2,c1,c0) */
+/* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */
+
+#ifdef BN_LLONG
+#define mul_add_c(a,b,c0,c1,c2) \
+	t=(BN_ULLONG)a*b; \
+	t1=(BN_ULONG)Lw(t); \
+	t2=(BN_ULONG)Hw(t); \
+	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
+	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
+
+#define mul_add_c2(a,b,c0,c1,c2) \
+	t=(BN_ULLONG)a*b; \
+	tt=(t+t)&BN_MASK; \
+	if (tt < t) c2++; \
+	t1=(BN_ULONG)Lw(tt); \
+	t2=(BN_ULONG)Hw(tt); \
+	c0=(c0+t1)&BN_MASK2;  \
+	if ((c0 < t1) && (((++t2)&BN_MASK2) == 0)) c2++; \
+	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
+
+#define sqr_add_c(a,i,c0,c1,c2) \
+	t=(BN_ULLONG)a[i]*a[i]; \
+	t1=(BN_ULONG)Lw(t); \
+	t2=(BN_ULONG)Hw(t); \
+	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
+	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
+
+#define sqr_add_c2(a,i,j,c0,c1,c2) \
+	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
+
+#elif defined(BN_UMULT_LOHI)
+
+#define mul_add_c(a,b,c0,c1,c2)	{	\
+	BN_ULONG ta=(a),tb=(b);		\
+	BN_UMULT_LOHI(t1,t2,ta,tb);	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define mul_add_c2(a,b,c0,c1,c2) {	\
+	BN_ULONG ta=(a),tb=(b),t0;	\
+	BN_UMULT_LOHI(t0,t1,ta,tb);	\
+	t2 = t1+t1; c2 += (t2<t1)?1:0;	\
+	t1 = t0+t0; t2 += (t1<t0)?1:0;	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define sqr_add_c(a,i,c0,c1,c2)	{	\
+	BN_ULONG ta=(a)[i];		\
+	BN_UMULT_LOHI(t1,t2,ta,ta);	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define sqr_add_c2(a,i,j,c0,c1,c2)	\
+	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
+
+#elif defined(BN_UMULT_HIGH)
+
+#define mul_add_c(a,b,c0,c1,c2)	{	\
+	BN_ULONG ta=(a),tb=(b);		\
+	t1 = ta * tb;			\
+	t2 = BN_UMULT_HIGH(ta,tb);	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define mul_add_c2(a,b,c0,c1,c2) {	\
+	BN_ULONG ta=(a),tb=(b),t0;	\
+	t1 = BN_UMULT_HIGH(ta,tb);	\
+	t0 = ta * tb;			\
+	t2 = t1+t1; c2 += (t2<t1)?1:0;	\
+	t1 = t0+t0; t2 += (t1<t0)?1:0;	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define sqr_add_c(a,i,c0,c1,c2)	{	\
+	BN_ULONG ta=(a)[i];		\
+	t1 = ta * ta;			\
+	t2 = BN_UMULT_HIGH(ta,ta);	\
+	c0 += t1; t2 += (c0<t1)?1:0;	\
+	c1 += t2; c2 += (c1<t2)?1:0;	\
+	}
+
+#define sqr_add_c2(a,i,j,c0,c1,c2)	\
+	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
+
+#else /* !BN_LLONG */
+#define mul_add_c(a,b,c0,c1,c2) \
+	t1=LBITS(a); t2=HBITS(a); \
+	bl=LBITS(b); bh=HBITS(b); \
+	mul64(t1,t2,bl,bh); \
+	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
+	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
+
+#define mul_add_c2(a,b,c0,c1,c2) \
+	t1=LBITS(a); t2=HBITS(a); \
+	bl=LBITS(b); bh=HBITS(b); \
+	mul64(t1,t2,bl,bh); \
+	if (t2 & BN_TBIT) c2++; \
+	t2=(t2+t2)&BN_MASK2; \
+	if (t1 & BN_TBIT) t2++; \
+	t1=(t1+t1)&BN_MASK2; \
+	c0=(c0+t1)&BN_MASK2;  \
+	if ((c0 < t1) && (((++t2)&BN_MASK2) == 0)) c2++; \
+	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
+
+#define sqr_add_c(a,i,c0,c1,c2) \
+	sqr64(t1,t2,(a)[i]); \
+	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
+	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
+
+#define sqr_add_c2(a,i,j,c0,c1,c2) \
+	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
+#endif /* !BN_LLONG */
+
+void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+#ifdef BN_LLONG
+	BN_ULLONG t;
+#else
+	BN_ULONG bl,bh;
+#endif
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	mul_add_c(a[0],b[0],c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	mul_add_c(a[0],b[1],c2,c3,c1);
+	mul_add_c(a[1],b[0],c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	mul_add_c(a[2],b[0],c3,c1,c2);
+	mul_add_c(a[1],b[1],c3,c1,c2);
+	mul_add_c(a[0],b[2],c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	mul_add_c(a[0],b[3],c1,c2,c3);
+	mul_add_c(a[1],b[2],c1,c2,c3);
+	mul_add_c(a[2],b[1],c1,c2,c3);
+	mul_add_c(a[3],b[0],c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	mul_add_c(a[4],b[0],c2,c3,c1);
+	mul_add_c(a[3],b[1],c2,c3,c1);
+	mul_add_c(a[2],b[2],c2,c3,c1);
+	mul_add_c(a[1],b[3],c2,c3,c1);
+	mul_add_c(a[0],b[4],c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	mul_add_c(a[0],b[5],c3,c1,c2);
+	mul_add_c(a[1],b[4],c3,c1,c2);
+	mul_add_c(a[2],b[3],c3,c1,c2);
+	mul_add_c(a[3],b[2],c3,c1,c2);
+	mul_add_c(a[4],b[1],c3,c1,c2);
+	mul_add_c(a[5],b[0],c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	mul_add_c(a[6],b[0],c1,c2,c3);
+	mul_add_c(a[5],b[1],c1,c2,c3);
+	mul_add_c(a[4],b[2],c1,c2,c3);
+	mul_add_c(a[3],b[3],c1,c2,c3);
+	mul_add_c(a[2],b[4],c1,c2,c3);
+	mul_add_c(a[1],b[5],c1,c2,c3);
+	mul_add_c(a[0],b[6],c1,c2,c3);
+	r[6]=c1;
+	c1=0;
+	mul_add_c(a[0],b[7],c2,c3,c1);
+	mul_add_c(a[1],b[6],c2,c3,c1);
+	mul_add_c(a[2],b[5],c2,c3,c1);
+	mul_add_c(a[3],b[4],c2,c3,c1);
+	mul_add_c(a[4],b[3],c2,c3,c1);
+	mul_add_c(a[5],b[2],c2,c3,c1);
+	mul_add_c(a[6],b[1],c2,c3,c1);
+	mul_add_c(a[7],b[0],c2,c3,c1);
+	r[7]=c2;
+	c2=0;
+	mul_add_c(a[7],b[1],c3,c1,c2);
+	mul_add_c(a[6],b[2],c3,c1,c2);
+	mul_add_c(a[5],b[3],c3,c1,c2);
+	mul_add_c(a[4],b[4],c3,c1,c2);
+	mul_add_c(a[3],b[5],c3,c1,c2);
+	mul_add_c(a[2],b[6],c3,c1,c2);
+	mul_add_c(a[1],b[7],c3,c1,c2);
+	r[8]=c3;
+	c3=0;
+	mul_add_c(a[2],b[7],c1,c2,c3);
+	mul_add_c(a[3],b[6],c1,c2,c3);
+	mul_add_c(a[4],b[5],c1,c2,c3);
+	mul_add_c(a[5],b[4],c1,c2,c3);
+	mul_add_c(a[6],b[3],c1,c2,c3);
+	mul_add_c(a[7],b[2],c1,c2,c3);
+	r[9]=c1;
+	c1=0;
+	mul_add_c(a[7],b[3],c2,c3,c1);
+	mul_add_c(a[6],b[4],c2,c3,c1);
+	mul_add_c(a[5],b[5],c2,c3,c1);
+	mul_add_c(a[4],b[6],c2,c3,c1);
+	mul_add_c(a[3],b[7],c2,c3,c1);
+	r[10]=c2;
+	c2=0;
+	mul_add_c(a[4],b[7],c3,c1,c2);
+	mul_add_c(a[5],b[6],c3,c1,c2);
+	mul_add_c(a[6],b[5],c3,c1,c2);
+	mul_add_c(a[7],b[4],c3,c1,c2);
+	r[11]=c3;
+	c3=0;
+	mul_add_c(a[7],b[5],c1,c2,c3);
+	mul_add_c(a[6],b[6],c1,c2,c3);
+	mul_add_c(a[5],b[7],c1,c2,c3);
+	r[12]=c1;
+	c1=0;
+	mul_add_c(a[6],b[7],c2,c3,c1);
+	mul_add_c(a[7],b[6],c2,c3,c1);
+	r[13]=c2;
+	c2=0;
+	mul_add_c(a[7],b[7],c3,c1,c2);
+	r[14]=c3;
+	r[15]=c1;
+	}
+
+void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+#ifdef BN_LLONG
+	BN_ULLONG t;
+#else
+	BN_ULONG bl,bh;
+#endif
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	mul_add_c(a[0],b[0],c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	mul_add_c(a[0],b[1],c2,c3,c1);
+	mul_add_c(a[1],b[0],c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	mul_add_c(a[2],b[0],c3,c1,c2);
+	mul_add_c(a[1],b[1],c3,c1,c2);
+	mul_add_c(a[0],b[2],c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	mul_add_c(a[0],b[3],c1,c2,c3);
+	mul_add_c(a[1],b[2],c1,c2,c3);
+	mul_add_c(a[2],b[1],c1,c2,c3);
+	mul_add_c(a[3],b[0],c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	mul_add_c(a[3],b[1],c2,c3,c1);
+	mul_add_c(a[2],b[2],c2,c3,c1);
+	mul_add_c(a[1],b[3],c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	mul_add_c(a[2],b[3],c3,c1,c2);
+	mul_add_c(a[3],b[2],c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	mul_add_c(a[3],b[3],c1,c2,c3);
+	r[6]=c1;
+	r[7]=c2;
+	}
+
+void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a)
+	{
+#ifdef BN_LLONG
+	BN_ULLONG t,tt;
+#else
+	BN_ULONG bl,bh;
+#endif
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	sqr_add_c(a,0,c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	sqr_add_c2(a,1,0,c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	sqr_add_c(a,1,c3,c1,c2);
+	sqr_add_c2(a,2,0,c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	sqr_add_c2(a,3,0,c1,c2,c3);
+	sqr_add_c2(a,2,1,c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	sqr_add_c(a,2,c2,c3,c1);
+	sqr_add_c2(a,3,1,c2,c3,c1);
+	sqr_add_c2(a,4,0,c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	sqr_add_c2(a,5,0,c3,c1,c2);
+	sqr_add_c2(a,4,1,c3,c1,c2);
+	sqr_add_c2(a,3,2,c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	sqr_add_c(a,3,c1,c2,c3);
+	sqr_add_c2(a,4,2,c1,c2,c3);
+	sqr_add_c2(a,5,1,c1,c2,c3);
+	sqr_add_c2(a,6,0,c1,c2,c3);
+	r[6]=c1;
+	c1=0;
+	sqr_add_c2(a,7,0,c2,c3,c1);
+	sqr_add_c2(a,6,1,c2,c3,c1);
+	sqr_add_c2(a,5,2,c2,c3,c1);
+	sqr_add_c2(a,4,3,c2,c3,c1);
+	r[7]=c2;
+	c2=0;
+	sqr_add_c(a,4,c3,c1,c2);
+	sqr_add_c2(a,5,3,c3,c1,c2);
+	sqr_add_c2(a,6,2,c3,c1,c2);
+	sqr_add_c2(a,7,1,c3,c1,c2);
+	r[8]=c3;
+	c3=0;
+	sqr_add_c2(a,7,2,c1,c2,c3);
+	sqr_add_c2(a,6,3,c1,c2,c3);
+	sqr_add_c2(a,5,4,c1,c2,c3);
+	r[9]=c1;
+	c1=0;
+	sqr_add_c(a,5,c2,c3,c1);
+	sqr_add_c2(a,6,4,c2,c3,c1);
+	sqr_add_c2(a,7,3,c2,c3,c1);
+	r[10]=c2;
+	c2=0;
+	sqr_add_c2(a,7,4,c3,c1,c2);
+	sqr_add_c2(a,6,5,c3,c1,c2);
+	r[11]=c3;
+	c3=0;
+	sqr_add_c(a,6,c1,c2,c3);
+	sqr_add_c2(a,7,5,c1,c2,c3);
+	r[12]=c1;
+	c1=0;
+	sqr_add_c2(a,7,6,c2,c3,c1);
+	r[13]=c2;
+	c2=0;
+	sqr_add_c(a,7,c3,c1,c2);
+	r[14]=c3;
+	r[15]=c1;
+	}
+
+void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a)
+	{
+#ifdef BN_LLONG
+	BN_ULLONG t,tt;
+#else
+	BN_ULONG bl,bh;
+#endif
+	BN_ULONG t1,t2;
+	BN_ULONG c1,c2,c3;
+
+	c1=0;
+	c2=0;
+	c3=0;
+	sqr_add_c(a,0,c1,c2,c3);
+	r[0]=c1;
+	c1=0;
+	sqr_add_c2(a,1,0,c2,c3,c1);
+	r[1]=c2;
+	c2=0;
+	sqr_add_c(a,1,c3,c1,c2);
+	sqr_add_c2(a,2,0,c3,c1,c2);
+	r[2]=c3;
+	c3=0;
+	sqr_add_c2(a,3,0,c1,c2,c3);
+	sqr_add_c2(a,2,1,c1,c2,c3);
+	r[3]=c1;
+	c1=0;
+	sqr_add_c(a,2,c2,c3,c1);
+	sqr_add_c2(a,3,1,c2,c3,c1);
+	r[4]=c2;
+	c2=0;
+	sqr_add_c2(a,3,2,c3,c1,c2);
+	r[5]=c3;
+	c3=0;
+	sqr_add_c(a,3,c1,c2,c3);
+	r[6]=c1;
+	r[7]=c2;
+	}
+
+#ifdef OPENSSL_NO_ASM
+#ifdef OPENSSL_BN_ASM_MONT
+#include <alloca.h>
+/*
+ * This is essentially reference implementation, which may or may not
+ * result in performance improvement. E.g. on IA-32 this routine was
+ * observed to give 40% faster rsa1024 private key operations and 10%
+ * faster rsa4096 ones, while on AMD64 it improves rsa1024 sign only
+ * by 10% and *worsens* rsa4096 sign by 15%. Once again, it's a
+ * reference implementation, one to be used as starting point for
+ * platform-specific assembler. Mentioned numbers apply to compiler
+ * generated code compiled with and without -DOPENSSL_BN_ASM_MONT and
+ * can vary not only from platform to platform, but even for compiler
+ * versions. Assembler vs. assembler improvement coefficients can
+ * [and are known to] differ and are to be documented elsewhere.
+ */
+int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0p, int num)
+	{
+	BN_ULONG c0,c1,ml,*tp,n0;
+#ifdef mul64
+	BN_ULONG mh;
+#endif
+	volatile BN_ULONG *vp;
+	int i=0,j;
+
+#if 0	/* template for platform-specific implementation */
+	if (ap==bp)	return bn_sqr_mont(rp,ap,np,n0p,num);
+#endif
+	vp = tp = alloca((num+2)*sizeof(BN_ULONG));
+
+	n0 = *n0p;
+
+	c0 = 0;
+	ml = bp[0];
+#ifdef mul64
+	mh = HBITS(ml);
+	ml = LBITS(ml);
+	for (j=0;j<num;++j)
+		mul(tp[j],ap[j],ml,mh,c0);
+#else
+	for (j=0;j<num;++j)
+		mul(tp[j],ap[j],ml,c0);
+#endif
+
+	tp[num]   = c0;
+	tp[num+1] = 0;
+	goto enter;
+
+	for(i=0;i<num;i++)
+		{
+		c0 = 0;
+		ml = bp[i];
+#ifdef mul64
+		mh = HBITS(ml);
+		ml = LBITS(ml);
+		for (j=0;j<num;++j)
+			mul_add(tp[j],ap[j],ml,mh,c0);
+#else
+		for (j=0;j<num;++j)
+			mul_add(tp[j],ap[j],ml,c0);
+#endif
+		c1 = (tp[num] + c0)&BN_MASK2;
+		tp[num]   = c1;
+		tp[num+1] = (c1<c0?1:0);
+	enter:
+		c1  = tp[0];
+		ml = (c1*n0)&BN_MASK2;
+		c0 = 0;
+#ifdef mul64
+		mh = HBITS(ml);
+		ml = LBITS(ml);
+		mul_add(c1,np[0],ml,mh,c0);
+#else
+		mul_add(c1,ml,np[0],c0);
+#endif
+		for(j=1;j<num;j++)
+			{
+			c1 = tp[j];
+#ifdef mul64
+			mul_add(c1,np[j],ml,mh,c0);
+#else
+			mul_add(c1,ml,np[j],c0);
+#endif
+			tp[j-1] = c1&BN_MASK2;
+			}
+		c1        = (tp[num] + c0)&BN_MASK2;
+		tp[num-1] = c1;
+		tp[num]   = tp[num+1] + (c1<c0?1:0);
+		}
+
+	if (tp[num]!=0 || tp[num-1]>=np[num-1])
+		{
+		c0 = bn_sub_words(rp,tp,np,num);
+		if (tp[num]!=0 || c0==0)
+			{
+			for(i=0;i<num+2;i++)	vp[i] = 0;
+			return 1;
+			}
+		}
+	for(i=0;i<num;i++)	rp[i] = tp[i],	vp[i] = 0;
+	vp[num]   = 0;
+	vp[num+1] = 0;
+	return 1;
+	}
+#else
+/*
+ * Return value of 0 indicates that multiplication/convolution was not
+ * performed to signal the caller to fall down to alternative/original
+ * code-path.
+ */
+int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num)
+{	return 0;	}
+#endif /* OPENSSL_BN_ASM_MONT */
+#endif
+
+#else /* !BN_MUL_COMBA */
+
+/* hmm... is it faster just to do a multiply? */
+#undef bn_sqr_comba4
+void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a)
+	{
+	BN_ULONG t[8];
+	bn_sqr_normal(r,a,4,t);
+	}
+
+#undef bn_sqr_comba8
+void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a)
+	{
+	BN_ULONG t[16];
+	bn_sqr_normal(r,a,8,t);
+	}
+
+void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+	r[4]=bn_mul_words(    &(r[0]),a,4,b[0]);
+	r[5]=bn_mul_add_words(&(r[1]),a,4,b[1]);
+	r[6]=bn_mul_add_words(&(r[2]),a,4,b[2]);
+	r[7]=bn_mul_add_words(&(r[3]),a,4,b[3]);
+	}
+
+void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
+	{
+	r[ 8]=bn_mul_words(    &(r[0]),a,8,b[0]);
+	r[ 9]=bn_mul_add_words(&(r[1]),a,8,b[1]);
+	r[10]=bn_mul_add_words(&(r[2]),a,8,b[2]);
+	r[11]=bn_mul_add_words(&(r[3]),a,8,b[3]);
+	r[12]=bn_mul_add_words(&(r[4]),a,8,b[4]);
+	r[13]=bn_mul_add_words(&(r[5]),a,8,b[5]);
+	r[14]=bn_mul_add_words(&(r[6]),a,8,b[6]);
+	r[15]=bn_mul_add_words(&(r[7]),a,8,b[7]);
+	}
+
+#ifdef OPENSSL_NO_ASM
+#ifdef OPENSSL_BN_ASM_MONT
+#include <alloca.h>
+int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0p, int num)
+	{
+	BN_ULONG c0,c1,*tp,n0=*n0p;
+	volatile BN_ULONG *vp;
+	int i=0,j;
+
+	vp = tp = alloca((num+2)*sizeof(BN_ULONG));
+
+	for(i=0;i<=num;i++)	tp[i]=0;
+
+	for(i=0;i<num;i++)
+		{
+		c0         = bn_mul_add_words(tp,ap,num,bp[i]);
+		c1         = (tp[num] + c0)&BN_MASK2;
+		tp[num]    = c1;
+		tp[num+1]  = (c1<c0?1:0);
+
+		c0         = bn_mul_add_words(tp,np,num,tp[0]*n0);
+		c1         = (tp[num] + c0)&BN_MASK2;
+		tp[num]    = c1;
+		tp[num+1] += (c1<c0?1:0);
+		for(j=0;j<=num;j++)	tp[j]=tp[j+1];
+		}
+
+	if (tp[num]!=0 || tp[num-1]>=np[num-1])
+		{
+		c0 = bn_sub_words(rp,tp,np,num);
+		if (tp[num]!=0 || c0==0)
+			{
+			for(i=0;i<num+2;i++)	vp[i] = 0;
+			return 1;
+			}
+		}
+	for(i=0;i<num;i++)	rp[i] = tp[i],	vp[i] = 0;
+	vp[num]   = 0;
+	vp[num+1] = 0;
+	return 1;
+	}
+#else
+int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num)
+{	return 0;	}
+#endif /* OPENSSL_BN_ASM_MONT */
+#endif
+
+#endif /* !BN_MUL_COMBA */
diff --git a/app/openssl/crypto/bn/bn_blind.c b/app/openssl/crypto/bn/bn_blind.c
new file mode 100644
index 00000000..e060592f
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_blind.c
@@ -0,0 +1,376 @@
+/* crypto/bn/bn_blind.c */
+/* ====================================================================
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+#define BN_BLINDING_COUNTER	32
+
+struct bn_blinding_st
+	{
+	BIGNUM *A;
+	BIGNUM *Ai;
+	BIGNUM *e;
+	BIGNUM *mod; /* just a reference */
+#ifndef OPENSSL_NO_DEPRECATED
+	unsigned long thread_id; /* added in OpenSSL 0.9.6j and 0.9.7b;
+				  * used only by crypto/rsa/rsa_eay.c, rsa_lib.c */
+#endif
+	CRYPTO_THREADID tid;
+	unsigned int  counter;
+	unsigned long flags;
+	BN_MONT_CTX *m_ctx;
+	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+			  const BIGNUM *m, BN_CTX *ctx,
+			  BN_MONT_CTX *m_ctx);
+	};
+
+BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod)
+	{
+	BN_BLINDING *ret=NULL;
+
+	bn_check_top(mod);
+
+	if ((ret=(BN_BLINDING *)OPENSSL_malloc(sizeof(BN_BLINDING))) == NULL)
+		{
+		BNerr(BN_F_BN_BLINDING_NEW,ERR_R_MALLOC_FAILURE);
+		return(NULL);
+		}
+	memset(ret,0,sizeof(BN_BLINDING));
+	if (A != NULL)
+		{
+		if ((ret->A  = BN_dup(A))  == NULL) goto err;
+		}
+	if (Ai != NULL)
+		{
+		if ((ret->Ai = BN_dup(Ai)) == NULL) goto err;
+		}
+
+	/* save a copy of mod in the BN_BLINDING structure */
+	if ((ret->mod = BN_dup(mod)) == NULL) goto err;
+	if (BN_get_flags(mod, BN_FLG_CONSTTIME) != 0)
+		BN_set_flags(ret->mod, BN_FLG_CONSTTIME);
+
+	ret->counter = BN_BLINDING_COUNTER;
+	CRYPTO_THREADID_current(&ret->tid);
+	return(ret);
+err:
+	if (ret != NULL) BN_BLINDING_free(ret);
+	return(NULL);
+	}
+
+void BN_BLINDING_free(BN_BLINDING *r)
+	{
+	if(r == NULL)
+	    return;
+
+	if (r->A  != NULL) BN_free(r->A );
+	if (r->Ai != NULL) BN_free(r->Ai);
+	if (r->e  != NULL) BN_free(r->e );
+	if (r->mod != NULL) BN_free(r->mod); 
+	OPENSSL_free(r);
+	}
+
+int BN_BLINDING_update(BN_BLINDING *b, BN_CTX *ctx)
+	{
+	int ret=0;
+
+	if ((b->A == NULL) || (b->Ai == NULL))
+		{
+		BNerr(BN_F_BN_BLINDING_UPDATE,BN_R_NOT_INITIALIZED);
+		goto err;
+		}
+
+	if (--(b->counter) == 0 && b->e != NULL &&
+		!(b->flags & BN_BLINDING_NO_RECREATE))
+		{
+		/* re-create blinding parameters */
+		if (!BN_BLINDING_create_param(b, NULL, NULL, ctx, NULL, NULL))
+			goto err;
+		}
+	else if (!(b->flags & BN_BLINDING_NO_UPDATE))
+		{
+		if (!BN_mod_mul(b->A,b->A,b->A,b->mod,ctx)) goto err;
+		if (!BN_mod_mul(b->Ai,b->Ai,b->Ai,b->mod,ctx)) goto err;
+		}
+
+	ret=1;
+err:
+	if (b->counter == 0)
+		b->counter = BN_BLINDING_COUNTER;
+	return(ret);
+	}
+
+int BN_BLINDING_convert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx)
+	{
+	return BN_BLINDING_convert_ex(n, NULL, b, ctx);
+	}
+
+int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *ctx)
+	{
+	int ret = 1;
+
+	bn_check_top(n);
+
+	if ((b->A == NULL) || (b->Ai == NULL))
+		{
+		BNerr(BN_F_BN_BLINDING_CONVERT_EX,BN_R_NOT_INITIALIZED);
+		return(0);
+		}
+
+	if (r != NULL)
+		{
+		if (!BN_copy(r, b->Ai)) ret=0;
+		}
+
+	if (!BN_mod_mul(n,n,b->A,b->mod,ctx)) ret=0;
+	
+	return ret;
+	}
+
+int BN_BLINDING_invert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx)
+	{
+	return BN_BLINDING_invert_ex(n, NULL, b, ctx);
+	}
+
+int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b, BN_CTX *ctx)
+	{
+	int ret;
+
+	bn_check_top(n);
+	if ((b->A == NULL) || (b->Ai == NULL))
+		{
+		BNerr(BN_F_BN_BLINDING_INVERT_EX,BN_R_NOT_INITIALIZED);
+		return(0);
+		}
+
+	if (r != NULL)
+		ret = BN_mod_mul(n, n, r, b->mod, ctx);
+	else
+		ret = BN_mod_mul(n, n, b->Ai, b->mod, ctx);
+
+	if (ret >= 0)
+		{
+		if (!BN_BLINDING_update(b,ctx))
+			return(0);
+		}
+	bn_check_top(n);
+	return(ret);
+	}
+
+#ifndef OPENSSL_NO_DEPRECATED
+unsigned long BN_BLINDING_get_thread_id(const BN_BLINDING *b)
+	{
+	return b->thread_id;
+	}
+
+void BN_BLINDING_set_thread_id(BN_BLINDING *b, unsigned long n)
+	{
+	b->thread_id = n;
+	}
+#endif
+
+CRYPTO_THREADID *BN_BLINDING_thread_id(BN_BLINDING *b)
+	{
+	return &b->tid;
+	}
+
+unsigned long BN_BLINDING_get_flags(const BN_BLINDING *b)
+	{
+	return b->flags;
+	}
+
+void BN_BLINDING_set_flags(BN_BLINDING *b, unsigned long flags)
+	{
+	b->flags = flags;
+	}
+
+BN_BLINDING *BN_BLINDING_create_param(BN_BLINDING *b,
+	const BIGNUM *e, BIGNUM *m, BN_CTX *ctx,
+	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+			  const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx),
+	BN_MONT_CTX *m_ctx)
+{
+	int    retry_counter = 32;
+	BN_BLINDING *ret = NULL;
+
+	if (b == NULL)
+		ret = BN_BLINDING_new(NULL, NULL, m);
+	else
+		ret = b;
+
+	if (ret == NULL)
+		goto err;
+
+	if (ret->A  == NULL && (ret->A  = BN_new()) == NULL)
+		goto err;
+	if (ret->Ai == NULL && (ret->Ai	= BN_new()) == NULL)
+		goto err;
+
+	if (e != NULL)
+		{
+		if (ret->e != NULL)
+			BN_free(ret->e);
+		ret->e = BN_dup(e);
+		}
+	if (ret->e == NULL)
+		goto err;
+
+	if (bn_mod_exp != NULL)
+		ret->bn_mod_exp = bn_mod_exp;
+	if (m_ctx != NULL)
+		ret->m_ctx = m_ctx;
+
+	do {
+		if (!BN_rand_range(ret->A, ret->mod)) goto err;
+		if (BN_mod_inverse(ret->Ai, ret->A, ret->mod, ctx) == NULL)
+			{
+			/* this should almost never happen for good RSA keys */
+			unsigned long error = ERR_peek_last_error();
+			if (ERR_GET_REASON(error) == BN_R_NO_INVERSE)
+				{
+				if (retry_counter-- == 0)
+				{
+					BNerr(BN_F_BN_BLINDING_CREATE_PARAM,
+						BN_R_TOO_MANY_ITERATIONS);
+					goto err;
+				}
+				ERR_clear_error();
+				}
+			else
+				goto err;
+			}
+		else
+			break;
+	} while (1);
+
+	if (ret->bn_mod_exp != NULL && ret->m_ctx != NULL)
+		{
+		if (!ret->bn_mod_exp(ret->A, ret->A, ret->e, ret->mod, ctx, ret->m_ctx))
+			goto err;
+		}
+	else
+		{
+		if (!BN_mod_exp(ret->A, ret->A, ret->e, ret->mod, ctx))
+			goto err;
+		}
+
+	return ret;
+err:
+	if (b == NULL && ret != NULL)
+		{
+		BN_BLINDING_free(ret);
+		ret = NULL;
+		}
+
+	return ret;
+}
diff --git a/app/openssl/crypto/bn/bn_const.c b/app/openssl/crypto/bn/bn_const.c
new file mode 100755
index 00000000..eb60a25b
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_const.c
@@ -0,0 +1,402 @@
+/* crypto/bn/knownprimes.c */
+/* Insert boilerplate */
+
+#include "bn.h"
+
+/* "First Oakley Default Group" from RFC2409, section 6.1.
+ *
+ * The prime is: 2^768 - 2 ^704 - 1 + 2^64 * { [2^638 pi] + 149686 }
+ *
+ * RFC2409 specifies a generator of 2.
+ * RFC2412 specifies a generator of of 22.
+ */
+
+BIGNUM *get_rfc2409_prime_768(BIGNUM *bn)
+	{
+	static const unsigned char RFC2409_PRIME_768[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x3A,0x36,0x20,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC2409_PRIME_768,sizeof(RFC2409_PRIME_768),bn);
+	}
+
+/* "Second Oakley Default Group" from RFC2409, section 6.2.
+ *
+ * The prime is: 2^1024 - 2^960 - 1 + 2^64 * { [2^894 pi] + 129093 }.
+ *
+ * RFC2409 specifies a generator of 2.
+ * RFC2412 specifies a generator of 22.
+ */
+
+BIGNUM *get_rfc2409_prime_1024(BIGNUM *bn)
+	{
+	static const unsigned char RFC2409_PRIME_1024[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
+		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
+		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE6,0x53,0x81,
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC2409_PRIME_1024,sizeof(RFC2409_PRIME_1024),bn);
+	}
+
+/* "1536-bit MODP Group" from RFC3526, Section 2.
+ *
+ * The prime is: 2^1536 - 2^1472 - 1 + 2^64 * { [2^1406 pi] + 741804 }
+ *
+ * RFC3526 specifies a generator of 2.
+ * RFC2312 specifies a generator of 22.
+ */
+
+BIGNUM *get_rfc3526_prime_1536(BIGNUM *bn)
+	{
+	static const unsigned char RFC3526_PRIME_1536[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
+		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
+		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
+		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
+		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
+		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
+		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
+		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
+		0xCA,0x23,0x73,0x27,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC3526_PRIME_1536,sizeof(RFC3526_PRIME_1536),bn);
+	}
+
+/* "2048-bit MODP Group" from RFC3526, Section 3.
+ *
+ * The prime is: 2^2048 - 2^1984 - 1 + 2^64 * { [2^1918 pi] + 124476 }
+ *
+ * RFC3526 specifies a generator of 2.
+ */
+
+BIGNUM *get_rfc3526_prime_2048(BIGNUM *bn)
+	{
+	static const unsigned char RFC3526_PRIME_2048[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
+		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
+		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
+		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
+		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
+		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
+		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
+		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
+		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
+		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
+		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
+		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
+		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
+		0x15,0x72,0x8E,0x5A,0x8A,0xAC,0xAA,0x68,0xFF,0xFF,0xFF,0xFF,
+		0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC3526_PRIME_2048,sizeof(RFC3526_PRIME_2048),bn);
+	}
+
+/* "3072-bit MODP Group" from RFC3526, Section 4.
+ *
+ * The prime is: 2^3072 - 2^3008 - 1 + 2^64 * { [2^2942 pi] + 1690314 }
+ *
+ * RFC3526 specifies a generator of 2.
+ */
+
+BIGNUM *get_rfc3526_prime_3072(BIGNUM *bn)
+	{
+	static const unsigned char RFC3526_PRIME_3072[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
+		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
+		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
+		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
+		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
+		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
+		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
+		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
+		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
+		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
+		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
+		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
+		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
+		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
+		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
+		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
+		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
+		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
+		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
+		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
+		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
+		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
+		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
+		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
+		0xA9,0x3A,0xD2,0xCA,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC3526_PRIME_3072,sizeof(RFC3526_PRIME_3072),bn);
+	}
+
+/* "4096-bit MODP Group" from RFC3526, Section 5.
+ *
+ * The prime is: 2^4096 - 2^4032 - 1 + 2^64 * { [2^3966 pi] + 240904 }
+ *
+ * RFC3526 specifies a generator of 2.
+ */
+
+BIGNUM *get_rfc3526_prime_4096(BIGNUM *bn)
+	{
+	static const unsigned char RFC3526_PRIME_4096[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
+		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
+		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
+		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
+		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
+		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
+		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
+		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
+		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
+		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
+		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
+		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
+		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
+		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
+		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
+		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
+		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
+		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
+		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
+		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
+		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
+		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
+		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
+		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
+		0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7,
+		0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18,
+		0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA,
+		0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB,
+		0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6,
+		0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F,
+		0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED,
+		0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76,
+		0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9,
+		0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC,
+		0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x06,0x31,0x99,
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC3526_PRIME_4096,sizeof(RFC3526_PRIME_4096),bn);
+	}
+
+/* "6144-bit MODP Group" from RFC3526, Section 6.
+ *
+ * The prime is: 2^6144 - 2^6080 - 1 + 2^64 * { [2^6014 pi] + 929484 }
+ *
+ * RFC3526 specifies a generator of 2.
+ */
+
+BIGNUM *get_rfc3526_prime_6144(BIGNUM *bn)
+	{
+	static const unsigned char RFC3526_PRIME_6144[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
+		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
+		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
+		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
+		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
+		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
+		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
+		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
+		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
+		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
+		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
+		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
+		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
+		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
+		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
+		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
+		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
+		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
+		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
+		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
+		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
+		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
+		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
+		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
+		0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7,
+		0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18,
+		0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA,
+		0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB,
+		0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6,
+		0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F,
+		0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED,
+		0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76,
+		0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9,
+		0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC,
+		0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x02,0x84,0x92,
+		0x36,0xC3,0xFA,0xB4,0xD2,0x7C,0x70,0x26,0xC1,0xD4,0xDC,0xB2,
+		0x60,0x26,0x46,0xDE,0xC9,0x75,0x1E,0x76,0x3D,0xBA,0x37,0xBD,
+		0xF8,0xFF,0x94,0x06,0xAD,0x9E,0x53,0x0E,0xE5,0xDB,0x38,0x2F,
+		0x41,0x30,0x01,0xAE,0xB0,0x6A,0x53,0xED,0x90,0x27,0xD8,0x31,
+		0x17,0x97,0x27,0xB0,0x86,0x5A,0x89,0x18,0xDA,0x3E,0xDB,0xEB,
+		0xCF,0x9B,0x14,0xED,0x44,0xCE,0x6C,0xBA,0xCE,0xD4,0xBB,0x1B,
+		0xDB,0x7F,0x14,0x47,0xE6,0xCC,0x25,0x4B,0x33,0x20,0x51,0x51,
+		0x2B,0xD7,0xAF,0x42,0x6F,0xB8,0xF4,0x01,0x37,0x8C,0xD2,0xBF,
+		0x59,0x83,0xCA,0x01,0xC6,0x4B,0x92,0xEC,0xF0,0x32,0xEA,0x15,
+		0xD1,0x72,0x1D,0x03,0xF4,0x82,0xD7,0xCE,0x6E,0x74,0xFE,0xF6,
+		0xD5,0x5E,0x70,0x2F,0x46,0x98,0x0C,0x82,0xB5,0xA8,0x40,0x31,
+		0x90,0x0B,0x1C,0x9E,0x59,0xE7,0xC9,0x7F,0xBE,0xC7,0xE8,0xF3,
+		0x23,0xA9,0x7A,0x7E,0x36,0xCC,0x88,0xBE,0x0F,0x1D,0x45,0xB7,
+		0xFF,0x58,0x5A,0xC5,0x4B,0xD4,0x07,0xB2,0x2B,0x41,0x54,0xAA,
+		0xCC,0x8F,0x6D,0x7E,0xBF,0x48,0xE1,0xD8,0x14,0xCC,0x5E,0xD2,
+		0x0F,0x80,0x37,0xE0,0xA7,0x97,0x15,0xEE,0xF2,0x9B,0xE3,0x28,
+		0x06,0xA1,0xD5,0x8B,0xB7,0xC5,0xDA,0x76,0xF5,0x50,0xAA,0x3D,
+		0x8A,0x1F,0xBF,0xF0,0xEB,0x19,0xCC,0xB1,0xA3,0x13,0xD5,0x5C,
+		0xDA,0x56,0xC9,0xEC,0x2E,0xF2,0x96,0x32,0x38,0x7F,0xE8,0xD7,
+		0x6E,0x3C,0x04,0x68,0x04,0x3E,0x8F,0x66,0x3F,0x48,0x60,0xEE,
+		0x12,0xBF,0x2D,0x5B,0x0B,0x74,0x74,0xD6,0xE6,0x94,0xF9,0x1E,
+		0x6D,0xCC,0x40,0x24,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC3526_PRIME_6144,sizeof(RFC3526_PRIME_6144),bn);
+	}
+
+/* "8192-bit MODP Group" from RFC3526, Section 7.
+ *
+ * The prime is: 2^8192 - 2^8128 - 1 + 2^64 * { [2^8062 pi] + 4743158 }
+ *
+ * RFC3526 specifies a generator of 2.
+ */
+
+BIGNUM *get_rfc3526_prime_8192(BIGNUM *bn)
+	{
+	static const unsigned char RFC3526_PRIME_8192[]={
+		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
+		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
+		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
+		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
+		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
+		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
+		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
+		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
+		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
+		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
+		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
+		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
+		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
+		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
+		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
+		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
+		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
+		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
+		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
+		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
+		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
+		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
+		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
+		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
+		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
+		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
+		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
+		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
+		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
+		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
+		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
+		0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7,
+		0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18,
+		0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA,
+		0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB,
+		0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6,
+		0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F,
+		0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED,
+		0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76,
+		0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9,
+		0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC,
+		0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x02,0x84,0x92,
+		0x36,0xC3,0xFA,0xB4,0xD2,0x7C,0x70,0x26,0xC1,0xD4,0xDC,0xB2,
+		0x60,0x26,0x46,0xDE,0xC9,0x75,0x1E,0x76,0x3D,0xBA,0x37,0xBD,
+		0xF8,0xFF,0x94,0x06,0xAD,0x9E,0x53,0x0E,0xE5,0xDB,0x38,0x2F,
+		0x41,0x30,0x01,0xAE,0xB0,0x6A,0x53,0xED,0x90,0x27,0xD8,0x31,
+		0x17,0x97,0x27,0xB0,0x86,0x5A,0x89,0x18,0xDA,0x3E,0xDB,0xEB,
+		0xCF,0x9B,0x14,0xED,0x44,0xCE,0x6C,0xBA,0xCE,0xD4,0xBB,0x1B,
+		0xDB,0x7F,0x14,0x47,0xE6,0xCC,0x25,0x4B,0x33,0x20,0x51,0x51,
+		0x2B,0xD7,0xAF,0x42,0x6F,0xB8,0xF4,0x01,0x37,0x8C,0xD2,0xBF,
+		0x59,0x83,0xCA,0x01,0xC6,0x4B,0x92,0xEC,0xF0,0x32,0xEA,0x15,
+		0xD1,0x72,0x1D,0x03,0xF4,0x82,0xD7,0xCE,0x6E,0x74,0xFE,0xF6,
+		0xD5,0x5E,0x70,0x2F,0x46,0x98,0x0C,0x82,0xB5,0xA8,0x40,0x31,
+		0x90,0x0B,0x1C,0x9E,0x59,0xE7,0xC9,0x7F,0xBE,0xC7,0xE8,0xF3,
+		0x23,0xA9,0x7A,0x7E,0x36,0xCC,0x88,0xBE,0x0F,0x1D,0x45,0xB7,
+		0xFF,0x58,0x5A,0xC5,0x4B,0xD4,0x07,0xB2,0x2B,0x41,0x54,0xAA,
+		0xCC,0x8F,0x6D,0x7E,0xBF,0x48,0xE1,0xD8,0x14,0xCC,0x5E,0xD2,
+		0x0F,0x80,0x37,0xE0,0xA7,0x97,0x15,0xEE,0xF2,0x9B,0xE3,0x28,
+		0x06,0xA1,0xD5,0x8B,0xB7,0xC5,0xDA,0x76,0xF5,0x50,0xAA,0x3D,
+		0x8A,0x1F,0xBF,0xF0,0xEB,0x19,0xCC,0xB1,0xA3,0x13,0xD5,0x5C,
+		0xDA,0x56,0xC9,0xEC,0x2E,0xF2,0x96,0x32,0x38,0x7F,0xE8,0xD7,
+		0x6E,0x3C,0x04,0x68,0x04,0x3E,0x8F,0x66,0x3F,0x48,0x60,0xEE,
+		0x12,0xBF,0x2D,0x5B,0x0B,0x74,0x74,0xD6,0xE6,0x94,0xF9,0x1E,
+		0x6D,0xBE,0x11,0x59,0x74,0xA3,0x92,0x6F,0x12,0xFE,0xE5,0xE4,
+		0x38,0x77,0x7C,0xB6,0xA9,0x32,0xDF,0x8C,0xD8,0xBE,0xC4,0xD0,
+		0x73,0xB9,0x31,0xBA,0x3B,0xC8,0x32,0xB6,0x8D,0x9D,0xD3,0x00,
+		0x74,0x1F,0xA7,0xBF,0x8A,0xFC,0x47,0xED,0x25,0x76,0xF6,0x93,
+		0x6B,0xA4,0x24,0x66,0x3A,0xAB,0x63,0x9C,0x5A,0xE4,0xF5,0x68,
+		0x34,0x23,0xB4,0x74,0x2B,0xF1,0xC9,0x78,0x23,0x8F,0x16,0xCB,
+		0xE3,0x9D,0x65,0x2D,0xE3,0xFD,0xB8,0xBE,0xFC,0x84,0x8A,0xD9,
+		0x22,0x22,0x2E,0x04,0xA4,0x03,0x7C,0x07,0x13,0xEB,0x57,0xA8,
+		0x1A,0x23,0xF0,0xC7,0x34,0x73,0xFC,0x64,0x6C,0xEA,0x30,0x6B,
+		0x4B,0xCB,0xC8,0x86,0x2F,0x83,0x85,0xDD,0xFA,0x9D,0x4B,0x7F,
+		0xA2,0xC0,0x87,0xE8,0x79,0x68,0x33,0x03,0xED,0x5B,0xDD,0x3A,
+		0x06,0x2B,0x3C,0xF5,0xB3,0xA2,0x78,0xA6,0x6D,0x2A,0x13,0xF8,
+		0x3F,0x44,0xF8,0x2D,0xDF,0x31,0x0E,0xE0,0x74,0xAB,0x6A,0x36,
+		0x45,0x97,0xE8,0x99,0xA0,0x25,0x5D,0xC1,0x64,0xF3,0x1C,0xC5,
+		0x08,0x46,0x85,0x1D,0xF9,0xAB,0x48,0x19,0x5D,0xED,0x7E,0xA1,
+		0xB1,0xD5,0x10,0xBD,0x7E,0xE7,0x4D,0x73,0xFA,0xF3,0x6B,0xC3,
+		0x1E,0xCF,0xA2,0x68,0x35,0x90,0x46,0xF4,0xEB,0x87,0x9F,0x92,
+		0x40,0x09,0x43,0x8B,0x48,0x1C,0x6C,0xD7,0x88,0x9A,0x00,0x2E,
+		0xD5,0xEE,0x38,0x2B,0xC9,0x19,0x0D,0xA6,0xFC,0x02,0x6E,0x47,
+		0x95,0x58,0xE4,0x47,0x56,0x77,0xE9,0xAA,0x9E,0x30,0x50,0xE2,
+		0x76,0x56,0x94,0xDF,0xC8,0x1F,0x56,0xE8,0x80,0xB9,0x6E,0x71,
+		0x60,0xC9,0x80,0xDD,0x98,0xED,0xD3,0xDF,0xFF,0xFF,0xFF,0xFF,
+		0xFF,0xFF,0xFF,0xFF,
+		};
+	return BN_bin2bn(RFC3526_PRIME_8192,sizeof(RFC3526_PRIME_8192),bn);
+	}
+
diff --git a/app/openssl/crypto/bn/bn_ctx.c b/app/openssl/crypto/bn/bn_ctx.c
new file mode 100644
index 00000000..3f2256f6
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_ctx.c
@@ -0,0 +1,454 @@
+/* crypto/bn/bn_ctx.c */
+/* Written by Ulf Moeller for the OpenSSL project. */
+/* ====================================================================
+ * Copyright (c) 1998-2004 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#if !defined(BN_CTX_DEBUG) && !defined(BN_DEBUG)
+#ifndef NDEBUG
+#define NDEBUG
+#endif
+#endif
+
+#include <stdio.h>
+#include <assert.h>
+
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+/* TODO list
+ *
+ * 1. Check a bunch of "(words+1)" type hacks in various bignum functions and
+ * check they can be safely removed.
+ *  - Check +1 and other ugliness in BN_from_montgomery()
+ *
+ * 2. Consider allowing a BN_new_ex() that, at least, lets you specify an
+ * appropriate 'block' size that will be honoured by bn_expand_internal() to
+ * prevent piddly little reallocations. OTOH, profiling bignum expansions in
+ * BN_CTX doesn't show this to be a big issue.
+ */
+
+/* How many bignums are in each "pool item"; */
+#define BN_CTX_POOL_SIZE	16
+/* The stack frame info is resizing, set a first-time expansion size; */
+#define BN_CTX_START_FRAMES	32
+
+/***********/
+/* BN_POOL */
+/***********/
+
+/* A bundle of bignums that can be linked with other bundles */
+typedef struct bignum_pool_item
+	{
+	/* The bignum values */
+	BIGNUM vals[BN_CTX_POOL_SIZE];
+	/* Linked-list admin */
+	struct bignum_pool_item *prev, *next;
+	} BN_POOL_ITEM;
+/* A linked-list of bignums grouped in bundles */
+typedef struct bignum_pool
+	{
+	/* Linked-list admin */
+	BN_POOL_ITEM *head, *current, *tail;
+	/* Stack depth and allocation size */
+	unsigned used, size;
+	} BN_POOL;
+static void		BN_POOL_init(BN_POOL *);
+static void		BN_POOL_finish(BN_POOL *);
+#ifndef OPENSSL_NO_DEPRECATED
+static void		BN_POOL_reset(BN_POOL *);
+#endif
+static BIGNUM *		BN_POOL_get(BN_POOL *);
+static void		BN_POOL_release(BN_POOL *, unsigned int);
+
+/************/
+/* BN_STACK */
+/************/
+
+/* A wrapper to manage the "stack frames" */
+typedef struct bignum_ctx_stack
+	{
+	/* Array of indexes into the bignum stack */
+	unsigned int *indexes;
+	/* Number of stack frames, and the size of the allocated array */
+	unsigned int depth, size;
+	} BN_STACK;
+static void		BN_STACK_init(BN_STACK *);
+static void		BN_STACK_finish(BN_STACK *);
+#ifndef OPENSSL_NO_DEPRECATED
+static void		BN_STACK_reset(BN_STACK *);
+#endif
+static int		BN_STACK_push(BN_STACK *, unsigned int);
+static unsigned int	BN_STACK_pop(BN_STACK *);
+
+/**********/
+/* BN_CTX */
+/**********/
+
+/* The opaque BN_CTX type */
+struct bignum_ctx
+	{
+	/* The bignum bundles */
+	BN_POOL pool;
+	/* The "stack frames", if you will */
+	BN_STACK stack;
+	/* The number of bignums currently assigned */
+	unsigned int used;
+	/* Depth of stack overflow */
+	int err_stack;
+	/* Block "gets" until an "end" (compatibility behaviour) */
+	int too_many;
+	};
+
+/* Enable this to find BN_CTX bugs */
+#ifdef BN_CTX_DEBUG
+static const char *ctxdbg_cur = NULL;
+static void ctxdbg(BN_CTX *ctx)
+	{
+	unsigned int bnidx = 0, fpidx = 0;
+	BN_POOL_ITEM *item = ctx->pool.head;
+	BN_STACK *stack = &ctx->stack;
+	fprintf(stderr,"(%08x): ", (unsigned int)ctx);
+	while(bnidx < ctx->used)
+		{
+		fprintf(stderr,"%03x ", item->vals[bnidx++ % BN_CTX_POOL_SIZE].dmax);
+		if(!(bnidx % BN_CTX_POOL_SIZE))
+			item = item->next;
+		}
+	fprintf(stderr,"\n");
+	bnidx = 0;
+	fprintf(stderr,"          : ");
+	while(fpidx < stack->depth)
+		{
+		while(bnidx++ < stack->indexes[fpidx])
+			fprintf(stderr,"    ");
+		fprintf(stderr,"^^^ ");
+		bnidx++;
+		fpidx++;
+		}
+	fprintf(stderr,"\n");
+	}
+#define CTXDBG_ENTRY(str, ctx)	do { \
+				ctxdbg_cur = (str); \
+				fprintf(stderr,"Starting %s\n", ctxdbg_cur); \
+				ctxdbg(ctx); \
+				} while(0)
+#define CTXDBG_EXIT(ctx)	do { \
+				fprintf(stderr,"Ending %s\n", ctxdbg_cur); \
+				ctxdbg(ctx); \
+				} while(0)
+#define CTXDBG_RET(ctx,ret)
+#else
+#define CTXDBG_ENTRY(str, ctx)
+#define CTXDBG_EXIT(ctx)
+#define CTXDBG_RET(ctx,ret)
+#endif
+
+/* This function is an evil legacy and should not be used. This implementation
+ * is WYSIWYG, though I've done my best. */
+#ifndef OPENSSL_NO_DEPRECATED
+void BN_CTX_init(BN_CTX *ctx)
+	{
+	/* Assume the caller obtained the context via BN_CTX_new() and so is
+	 * trying to reset it for use. Nothing else makes sense, least of all
+	 * binary compatibility from a time when they could declare a static
+	 * variable. */
+	BN_POOL_reset(&ctx->pool);
+	BN_STACK_reset(&ctx->stack);
+	ctx->used = 0;
+	ctx->err_stack = 0;
+	ctx->too_many = 0;
+	}
+#endif
+
+BN_CTX *BN_CTX_new(void)
+	{
+	BN_CTX *ret = OPENSSL_malloc(sizeof(BN_CTX));
+	if(!ret)
+		{
+		BNerr(BN_F_BN_CTX_NEW,ERR_R_MALLOC_FAILURE);
+		return NULL;
+		}
+	/* Initialise the structure */
+	BN_POOL_init(&ret->pool);
+	BN_STACK_init(&ret->stack);
+	ret->used = 0;
+	ret->err_stack = 0;
+	ret->too_many = 0;
+	return ret;
+	}
+
+void BN_CTX_free(BN_CTX *ctx)
+	{
+	if (ctx == NULL)
+		return;
+#ifdef BN_CTX_DEBUG
+	{
+	BN_POOL_ITEM *pool = ctx->pool.head;
+	fprintf(stderr,"BN_CTX_free, stack-size=%d, pool-bignums=%d\n",
+		ctx->stack.size, ctx->pool.size);
+	fprintf(stderr,"dmaxs: ");
+	while(pool) {
+		unsigned loop = 0;
+		while(loop < BN_CTX_POOL_SIZE)
+			fprintf(stderr,"%02x ", pool->vals[loop++].dmax);
+		pool = pool->next;
+	}
+	fprintf(stderr,"\n");
+	}
+#endif
+	BN_STACK_finish(&ctx->stack);
+	BN_POOL_finish(&ctx->pool);
+	OPENSSL_free(ctx);
+	}
+
+void BN_CTX_start(BN_CTX *ctx)
+	{
+	CTXDBG_ENTRY("BN_CTX_start", ctx);
+	/* If we're already overflowing ... */
+	if(ctx->err_stack || ctx->too_many)
+		ctx->err_stack++;
+	/* (Try to) get a new frame pointer */
+	else if(!BN_STACK_push(&ctx->stack, ctx->used))
+		{
+		BNerr(BN_F_BN_CTX_START,BN_R_TOO_MANY_TEMPORARY_VARIABLES);
+		ctx->err_stack++;
+		}
+	CTXDBG_EXIT(ctx);
+	}
+
+void BN_CTX_end(BN_CTX *ctx)
+	{
+	CTXDBG_ENTRY("BN_CTX_end", ctx);
+	if(ctx->err_stack)
+		ctx->err_stack--;
+	else
+		{
+		unsigned int fp = BN_STACK_pop(&ctx->stack);
+		/* Does this stack frame have anything to release? */
+		if(fp < ctx->used)
+			BN_POOL_release(&ctx->pool, ctx->used - fp);
+		ctx->used = fp;
+		/* Unjam "too_many" in case "get" had failed */
+		ctx->too_many = 0;
+		}
+	CTXDBG_EXIT(ctx);
+	}
+
+BIGNUM *BN_CTX_get(BN_CTX *ctx)
+	{
+	BIGNUM *ret;
+	CTXDBG_ENTRY("BN_CTX_get", ctx);
+	if(ctx->err_stack || ctx->too_many) return NULL;
+	if((ret = BN_POOL_get(&ctx->pool)) == NULL)
+		{
+		/* Setting too_many prevents repeated "get" attempts from
+		 * cluttering the error stack. */
+		ctx->too_many = 1;
+		BNerr(BN_F_BN_CTX_GET,BN_R_TOO_MANY_TEMPORARY_VARIABLES);
+		return NULL;
+		}
+	/* OK, make sure the returned bignum is "zero" */
+	BN_zero(ret);
+	ctx->used++;
+	CTXDBG_RET(ctx, ret);
+	return ret;
+	}
+
+/************/
+/* BN_STACK */
+/************/
+
+static void BN_STACK_init(BN_STACK *st)
+	{
+	st->indexes = NULL;
+	st->depth = st->size = 0;
+	}
+
+static void BN_STACK_finish(BN_STACK *st)
+	{
+	if(st->size) OPENSSL_free(st->indexes);
+	}
+
+#ifndef OPENSSL_NO_DEPRECATED
+static void BN_STACK_reset(BN_STACK *st)
+	{
+	st->depth = 0;
+	}
+#endif
+
+static int BN_STACK_push(BN_STACK *st, unsigned int idx)
+	{
+	if(st->depth == st->size)
+		/* Need to expand */
+		{
+		unsigned int newsize = (st->size ?
+				(st->size * 3 / 2) : BN_CTX_START_FRAMES);
+		unsigned int *newitems = OPENSSL_malloc(newsize *
+						sizeof(unsigned int));
+		if(!newitems) return 0;
+		if(st->depth)
+			memcpy(newitems, st->indexes, st->depth *
+						sizeof(unsigned int));
+		if(st->size) OPENSSL_free(st->indexes);
+		st->indexes = newitems;
+		st->size = newsize;
+		}
+	st->indexes[(st->depth)++] = idx;
+	return 1;
+	}
+
+static unsigned int BN_STACK_pop(BN_STACK *st)
+	{
+	return st->indexes[--(st->depth)];
+	}
+
+/***********/
+/* BN_POOL */
+/***********/
+
+static void BN_POOL_init(BN_POOL *p)
+	{
+	p->head = p->current = p->tail = NULL;
+	p->used = p->size = 0;
+	}
+
+static void BN_POOL_finish(BN_POOL *p)
+	{
+	while(p->head)
+		{
+		unsigned int loop = 0;
+		BIGNUM *bn = p->head->vals;
+		while(loop++ < BN_CTX_POOL_SIZE)
+			{
+			if(bn->d) BN_clear_free(bn);
+			bn++;
+			}
+		p->current = p->head->next;
+		OPENSSL_free(p->head);
+		p->head = p->current;
+		}
+	}
+
+#ifndef OPENSSL_NO_DEPRECATED
+static void BN_POOL_reset(BN_POOL *p)
+	{
+	BN_POOL_ITEM *item = p->head;
+	while(item)
+		{
+		unsigned int loop = 0;
+		BIGNUM *bn = item->vals;
+		while(loop++ < BN_CTX_POOL_SIZE)
+			{
+			if(bn->d) BN_clear(bn);
+			bn++;
+			}
+		item = item->next;
+		}
+	p->current = p->head;
+	p->used = 0;
+	}
+#endif
+
+static BIGNUM *BN_POOL_get(BN_POOL *p)
+	{
+	if(p->used == p->size)
+		{
+		BIGNUM *bn;
+		unsigned int loop = 0;
+		BN_POOL_ITEM *item = OPENSSL_malloc(sizeof(BN_POOL_ITEM));
+		if(!item) return NULL;
+		/* Initialise the structure */
+		bn = item->vals;
+		while(loop++ < BN_CTX_POOL_SIZE)
+			BN_init(bn++);
+		item->prev = p->tail;
+		item->next = NULL;
+		/* Link it in */
+		if(!p->head)
+			p->head = p->current = p->tail = item;
+		else
+			{
+			p->tail->next = item;
+			p->tail = item;
+			p->current = item;
+			}
+		p->size += BN_CTX_POOL_SIZE;
+		p->used++;
+		/* Return the first bignum from the new pool */
+		return item->vals;
+		}
+	if(!p->used)
+		p->current = p->head;
+	else if((p->used % BN_CTX_POOL_SIZE) == 0)
+		p->current = p->current->next;
+	return p->current->vals + ((p->used++) % BN_CTX_POOL_SIZE);
+	}
+
+static void BN_POOL_release(BN_POOL *p, unsigned int num)
+	{
+	unsigned int offset = (p->used - 1) % BN_CTX_POOL_SIZE;
+	p->used -= num;
+	while(num--)
+		{
+		bn_check_top(p->current->vals + offset);
+		if(!offset)
+			{
+			offset = BN_CTX_POOL_SIZE - 1;
+			p->current = p->current->prev;
+			}
+		else
+			offset--;
+		}
+	}
+
diff --git a/app/openssl/crypto/bn/bn_depr.c b/app/openssl/crypto/bn/bn_depr.c
new file mode 100644
index 00000000..27535e4f
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_depr.c
@@ -0,0 +1,112 @@
+/* crypto/bn/bn_depr.c */
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+/* Support for deprecated functions goes here - static linkage will only slurp
+ * this code if applications are using them directly. */
+
+#include <stdio.h>
+#include <time.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+#include <openssl/rand.h>
+
+static void *dummy=&dummy;
+
+#ifndef OPENSSL_NO_DEPRECATED
+BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
+	const BIGNUM *add, const BIGNUM *rem,
+	void (*callback)(int,int,void *), void *cb_arg)
+	{
+	BN_GENCB cb;
+	BIGNUM *rnd=NULL;
+	int found = 0;
+
+	BN_GENCB_set_old(&cb, callback, cb_arg);
+
+	if (ret == NULL)
+		{
+		if ((rnd=BN_new()) == NULL) goto err;
+		}
+	else
+		rnd=ret;
+	if(!BN_generate_prime_ex(rnd, bits, safe, add, rem, &cb))
+		goto err;
+
+	/* we have a prime :-) */
+	found = 1;
+err:
+	if (!found && (ret == NULL) && (rnd != NULL)) BN_free(rnd);
+	return(found ? rnd : NULL);
+	}
+
+int BN_is_prime(const BIGNUM *a, int checks, void (*callback)(int,int,void *),
+	BN_CTX *ctx_passed, void *cb_arg)
+	{
+	BN_GENCB cb;
+	BN_GENCB_set_old(&cb, callback, cb_arg);
+	return BN_is_prime_ex(a, checks, ctx_passed, &cb);
+	}
+
+int BN_is_prime_fasttest(const BIGNUM *a, int checks,
+		void (*callback)(int,int,void *),
+		BN_CTX *ctx_passed, void *cb_arg,
+		int do_trial_division)
+	{
+	BN_GENCB cb;
+	BN_GENCB_set_old(&cb, callback, cb_arg);
+	return BN_is_prime_fasttest_ex(a, checks, ctx_passed,
+				do_trial_division, &cb);
+	}
+#endif
diff --git a/app/openssl/crypto/bn/bn_div.c b/app/openssl/crypto/bn/bn_div.c
new file mode 100644
index 00000000..802a43d6
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_div.c
@@ -0,0 +1,650 @@
+/* crypto/bn/bn_div.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <openssl/bn.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+
+/* The old slow way */
+#if 0
+int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
+	   BN_CTX *ctx)
+	{
+	int i,nm,nd;
+	int ret = 0;
+	BIGNUM *D;
+
+	bn_check_top(m);
+	bn_check_top(d);
+	if (BN_is_zero(d))
+		{
+		BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO);
+		return(0);
+		}
+
+	if (BN_ucmp(m,d) < 0)
+		{
+		if (rem != NULL)
+			{ if (BN_copy(rem,m) == NULL) return(0); }
+		if (dv != NULL) BN_zero(dv);
+		return(1);
+		}
+
+	BN_CTX_start(ctx);
+	D = BN_CTX_get(ctx);
+	if (dv == NULL) dv = BN_CTX_get(ctx);
+	if (rem == NULL) rem = BN_CTX_get(ctx);
+	if (D == NULL || dv == NULL || rem == NULL)
+		goto end;
+
+	nd=BN_num_bits(d);
+	nm=BN_num_bits(m);
+	if (BN_copy(D,d) == NULL) goto end;
+	if (BN_copy(rem,m) == NULL) goto end;
+
+	/* The next 2 are needed so we can do a dv->d[0]|=1 later
+	 * since BN_lshift1 will only work once there is a value :-) */
+	BN_zero(dv);
+	if(bn_wexpand(dv,1) == NULL) goto end;
+	dv->top=1;
+
+	if (!BN_lshift(D,D,nm-nd)) goto end;
+	for (i=nm-nd; i>=0; i--)
+		{
+		if (!BN_lshift1(dv,dv)) goto end;
+		if (BN_ucmp(rem,D) >= 0)
+			{
+			dv->d[0]|=1;
+			if (!BN_usub(rem,rem,D)) goto end;
+			}
+/* CAN IMPROVE (and have now :=) */
+		if (!BN_rshift1(D,D)) goto end;
+		}
+	rem->neg=BN_is_zero(rem)?0:m->neg;
+	dv->neg=m->neg^d->neg;
+	ret = 1;
+ end:
+	BN_CTX_end(ctx);
+	return(ret);
+	}
+
+#else
+
+#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) \
+    && !defined(PEDANTIC) && !defined(BN_DIV3W)
+# if defined(__GNUC__) && __GNUC__>=2
+#  if defined(__i386) || defined (__i386__)
+   /*
+    * There were two reasons for implementing this template:
+    * - GNU C generates a call to a function (__udivdi3 to be exact)
+    *   in reply to ((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0 (I fail to
+    *   understand why...);
+    * - divl doesn't only calculate quotient, but also leaves
+    *   remainder in %edx which we can definitely use here:-)
+    *
+    *					<appro@fy.chalmers.se>
+    */
+#  define bn_div_words(n0,n1,d0)		\
+	({  asm volatile (			\
+		"divl	%4"			\
+		: "=a"(q), "=d"(rem)		\
+		: "a"(n1), "d"(n0), "g"(d0)	\
+		: "cc");			\
+	    q;					\
+	})
+#  define REMAINDER_IS_ALREADY_CALCULATED
+#  elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
+   /*
+    * Same story here, but it's 128-bit by 64-bit division. Wow!
+    *					<appro@fy.chalmers.se>
+    */
+#  define bn_div_words(n0,n1,d0)		\
+	({  asm volatile (			\
+		"divq	%4"			\
+		: "=a"(q), "=d"(rem)		\
+		: "a"(n1), "d"(n0), "g"(d0)	\
+		: "cc");			\
+	    q;					\
+	})
+#  define REMAINDER_IS_ALREADY_CALCULATED
+#  endif /* __<cpu> */
+# endif /* __GNUC__ */
+#endif /* OPENSSL_NO_ASM */
+
+
+/* BN_div[_no_branch] computes  dv := num / divisor,  rounding towards
+ * zero, and sets up rm  such that  dv*divisor + rm = num  holds.
+ * Thus:
+ *     dv->neg == num->neg ^ divisor->neg  (unless the result is zero)
+ *     rm->neg == num->neg                 (unless the remainder is zero)
+ * If 'dv' or 'rm' is NULL, the respective value is not returned.
+ */
+static int BN_div_no_branch(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num,
+        const BIGNUM *divisor, BN_CTX *ctx);
+int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor,
+	   BN_CTX *ctx)
+	{
+	int norm_shift,i,loop;
+	BIGNUM *tmp,wnum,*snum,*sdiv,*res;
+	BN_ULONG *resp,*wnump;
+	BN_ULONG d0,d1;
+	int num_n,div_n;
+
+	/* Invalid zero-padding would have particularly bad consequences
+	 * in the case of 'num', so don't just rely on bn_check_top() for this one
+	 * (bn_check_top() works only for BN_DEBUG builds) */
+	if (num->top > 0 && num->d[num->top - 1] == 0)
+		{
+		BNerr(BN_F_BN_DIV,BN_R_NOT_INITIALIZED);
+		return 0;
+		}
+
+	bn_check_top(num);
+
+	if ((BN_get_flags(num, BN_FLG_CONSTTIME) != 0) || (BN_get_flags(divisor, BN_FLG_CONSTTIME) != 0))
+		{
+		return BN_div_no_branch(dv, rm, num, divisor, ctx);
+		}
+
+	bn_check_top(dv);
+	bn_check_top(rm);
+	/* bn_check_top(num); */ /* 'num' has been checked already */
+	bn_check_top(divisor);
+
+	if (BN_is_zero(divisor))
+		{
+		BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO);
+		return(0);
+		}
+
+	if (BN_ucmp(num,divisor) < 0)
+		{
+		if (rm != NULL)
+			{ if (BN_copy(rm,num) == NULL) return(0); }
+		if (dv != NULL) BN_zero(dv);
+		return(1);
+		}
+
+	BN_CTX_start(ctx);
+	tmp=BN_CTX_get(ctx);
+	snum=BN_CTX_get(ctx);
+	sdiv=BN_CTX_get(ctx);
+	if (dv == NULL)
+		res=BN_CTX_get(ctx);
+	else	res=dv;
+	if (sdiv == NULL || res == NULL || tmp == NULL || snum == NULL)
+		goto err;
+
+	/* First we normalise the numbers */
+	norm_shift=BN_BITS2-((BN_num_bits(divisor))%BN_BITS2);
+	if (!(BN_lshift(sdiv,divisor,norm_shift))) goto err;
+	sdiv->neg=0;
+	norm_shift+=BN_BITS2;
+	if (!(BN_lshift(snum,num,norm_shift))) goto err;
+	snum->neg=0;
+	div_n=sdiv->top;
+	num_n=snum->top;
+	loop=num_n-div_n;
+	/* Lets setup a 'window' into snum
+	 * This is the part that corresponds to the current
+	 * 'area' being divided */
+	wnum.neg   = 0;
+	wnum.d     = &(snum->d[loop]);
+	wnum.top   = div_n;
+	/* only needed when BN_ucmp messes up the values between top and max */
+	wnum.dmax  = snum->dmax - loop; /* so we don't step out of bounds */
+
+	/* Get the top 2 words of sdiv */
+	/* div_n=sdiv->top; */
+	d0=sdiv->d[div_n-1];
+	d1=(div_n == 1)?0:sdiv->d[div_n-2];
+
+	/* pointer to the 'top' of snum */
+	wnump= &(snum->d[num_n-1]);
+
+	/* Setup to 'res' */
+	res->neg= (num->neg^divisor->neg);
+	if (!bn_wexpand(res,(loop+1))) goto err;
+	res->top=loop;
+	resp= &(res->d[loop-1]);
+
+	/* space for temp */
+	if (!bn_wexpand(tmp,(div_n+1))) goto err;
+
+	if (BN_ucmp(&wnum,sdiv) >= 0)
+		{
+		/* If BN_DEBUG_RAND is defined BN_ucmp changes (via
+		 * bn_pollute) the const bignum arguments =>
+		 * clean the values between top and max again */
+		bn_clear_top2max(&wnum);
+		bn_sub_words(wnum.d, wnum.d, sdiv->d, div_n);
+		*resp=1;
+		}
+	else
+		res->top--;
+	/* if res->top == 0 then clear the neg value otherwise decrease
+	 * the resp pointer */
+	if (res->top == 0)
+		res->neg = 0;
+	else
+		resp--;
+
+	for (i=0; i<loop-1; i++, wnump--, resp--)
+		{
+		BN_ULONG q,l0;
+		/* the first part of the loop uses the top two words of
+		 * snum and sdiv to calculate a BN_ULONG q such that
+		 * | wnum - sdiv * q | < sdiv */
+#if defined(BN_DIV3W) && !defined(OPENSSL_NO_ASM)
+		BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG);
+		q=bn_div_3_words(wnump,d1,d0);
+#else
+		BN_ULONG n0,n1,rem=0;
+
+		n0=wnump[0];
+		n1=wnump[-1];
+		if (n0 == d0)
+			q=BN_MASK2;
+		else 			/* n0 < d0 */
+			{
+#ifdef BN_LLONG
+			BN_ULLONG t2;
+
+#if defined(BN_LLONG) && defined(BN_DIV2W) && !defined(bn_div_words)
+			q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0);
+#else
+			q=bn_div_words(n0,n1,d0);
+#ifdef BN_DEBUG_LEVITTE
+			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
+X) -> 0x%08X\n",
+				n0, n1, d0, q);
+#endif
+#endif
+
+#ifndef REMAINDER_IS_ALREADY_CALCULATED
+			/*
+			 * rem doesn't have to be BN_ULLONG. The least we
+			 * know it's less that d0, isn't it?
+			 */
+			rem=(n1-q*d0)&BN_MASK2;
+#endif
+			t2=(BN_ULLONG)d1*q;
+
+			for (;;)
+				{
+				if (t2 <= ((((BN_ULLONG)rem)<<BN_BITS2)|wnump[-2]))
+					break;
+				q--;
+				rem += d0;
+				if (rem < d0) break; /* don't let rem overflow */
+				t2 -= d1;
+				}
+#else /* !BN_LLONG */
+			BN_ULONG t2l,t2h;
+
+			q=bn_div_words(n0,n1,d0);
+#ifdef BN_DEBUG_LEVITTE
+			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
+X) -> 0x%08X\n",
+				n0, n1, d0, q);
+#endif
+#ifndef REMAINDER_IS_ALREADY_CALCULATED
+			rem=(n1-q*d0)&BN_MASK2;
+#endif
+
+#if defined(BN_UMULT_LOHI)
+			BN_UMULT_LOHI(t2l,t2h,d1,q);
+#elif defined(BN_UMULT_HIGH)
+			t2l = d1 * q;
+			t2h = BN_UMULT_HIGH(d1,q);
+#else
+			{
+			BN_ULONG ql, qh;
+			t2l=LBITS(d1); t2h=HBITS(d1);
+			ql =LBITS(q);  qh =HBITS(q);
+			mul64(t2l,t2h,ql,qh); /* t2=(BN_ULLONG)d1*q; */
+			}
+#endif
+
+			for (;;)
+				{
+				if ((t2h < rem) ||
+					((t2h == rem) && (t2l <= wnump[-2])))
+					break;
+				q--;
+				rem += d0;
+				if (rem < d0) break; /* don't let rem overflow */
+				if (t2l < d1) t2h--; t2l -= d1;
+				}
+#endif /* !BN_LLONG */
+			}
+#endif /* !BN_DIV3W */
+
+		l0=bn_mul_words(tmp->d,sdiv->d,div_n,q);
+		tmp->d[div_n]=l0;
+		wnum.d--;
+		/* ingore top values of the bignums just sub the two 
+		 * BN_ULONG arrays with bn_sub_words */
+		if (bn_sub_words(wnum.d, wnum.d, tmp->d, div_n+1))
+			{
+			/* Note: As we have considered only the leading
+			 * two BN_ULONGs in the calculation of q, sdiv * q
+			 * might be greater than wnum (but then (q-1) * sdiv
+			 * is less or equal than wnum)
+			 */
+			q--;
+			if (bn_add_words(wnum.d, wnum.d, sdiv->d, div_n))
+				/* we can't have an overflow here (assuming
+				 * that q != 0, but if q == 0 then tmp is
+				 * zero anyway) */
+				(*wnump)++;
+			}
+		/* store part of the result */
+		*resp = q;
+		}
+	bn_correct_top(snum);
+	if (rm != NULL)
+		{
+		/* Keep a copy of the neg flag in num because if rm==num
+		 * BN_rshift() will overwrite it.
+		 */
+		int neg = num->neg;
+		BN_rshift(rm,snum,norm_shift);
+		if (!BN_is_zero(rm))
+			rm->neg = neg;
+		bn_check_top(rm);
+		}
+	BN_CTX_end(ctx);
+	return(1);
+err:
+	bn_check_top(rm);
+	BN_CTX_end(ctx);
+	return(0);
+	}
+
+
+/* BN_div_no_branch is a special version of BN_div. It does not contain
+ * branches that may leak sensitive information.
+ */
+static int BN_div_no_branch(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, 
+	const BIGNUM *divisor, BN_CTX *ctx)
+	{
+	int norm_shift,i,loop;
+	BIGNUM *tmp,wnum,*snum,*sdiv,*res;
+	BN_ULONG *resp,*wnump;
+	BN_ULONG d0,d1;
+	int num_n,div_n;
+
+	bn_check_top(dv);
+	bn_check_top(rm);
+	/* bn_check_top(num); */ /* 'num' has been checked in BN_div() */
+	bn_check_top(divisor);
+
+	if (BN_is_zero(divisor))
+		{
+		BNerr(BN_F_BN_DIV_NO_BRANCH,BN_R_DIV_BY_ZERO);
+		return(0);
+		}
+
+	BN_CTX_start(ctx);
+	tmp=BN_CTX_get(ctx);
+	snum=BN_CTX_get(ctx);
+	sdiv=BN_CTX_get(ctx);
+	if (dv == NULL)
+		res=BN_CTX_get(ctx);
+	else	res=dv;
+	if (sdiv == NULL || res == NULL) goto err;
+
+	/* First we normalise the numbers */
+	norm_shift=BN_BITS2-((BN_num_bits(divisor))%BN_BITS2);
+	if (!(BN_lshift(sdiv,divisor,norm_shift))) goto err;
+	sdiv->neg=0;
+	norm_shift+=BN_BITS2;
+	if (!(BN_lshift(snum,num,norm_shift))) goto err;
+	snum->neg=0;
+
+	/* Since we don't know whether snum is larger than sdiv,
+	 * we pad snum with enough zeroes without changing its
+	 * value. 
+	 */
+	if (snum->top <= sdiv->top+1) 
+		{
+		if (bn_wexpand(snum, sdiv->top + 2) == NULL) goto err;
+		for (i = snum->top; i < sdiv->top + 2; i++) snum->d[i] = 0;
+		snum->top = sdiv->top + 2;
+		}
+	else
+		{
+		if (bn_wexpand(snum, snum->top + 1) == NULL) goto err;
+		snum->d[snum->top] = 0;
+		snum->top ++;
+		}
+
+	div_n=sdiv->top;
+	num_n=snum->top;
+	loop=num_n-div_n;
+	/* Lets setup a 'window' into snum
+	 * This is the part that corresponds to the current
+	 * 'area' being divided */
+	wnum.neg   = 0;
+	wnum.d     = &(snum->d[loop]);
+	wnum.top   = div_n;
+	/* only needed when BN_ucmp messes up the values between top and max */
+	wnum.dmax  = snum->dmax - loop; /* so we don't step out of bounds */
+
+	/* Get the top 2 words of sdiv */
+	/* div_n=sdiv->top; */
+	d0=sdiv->d[div_n-1];
+	d1=(div_n == 1)?0:sdiv->d[div_n-2];
+
+	/* pointer to the 'top' of snum */
+	wnump= &(snum->d[num_n-1]);
+
+	/* Setup to 'res' */
+	res->neg= (num->neg^divisor->neg);
+	if (!bn_wexpand(res,(loop+1))) goto err;
+	res->top=loop-1;
+	resp= &(res->d[loop-1]);
+
+	/* space for temp */
+	if (!bn_wexpand(tmp,(div_n+1))) goto err;
+
+	/* if res->top == 0 then clear the neg value otherwise decrease
+	 * the resp pointer */
+	if (res->top == 0)
+		res->neg = 0;
+	else
+		resp--;
+
+	for (i=0; i<loop-1; i++, wnump--, resp--)
+		{
+		BN_ULONG q,l0;
+		/* the first part of the loop uses the top two words of
+		 * snum and sdiv to calculate a BN_ULONG q such that
+		 * | wnum - sdiv * q | < sdiv */
+#if defined(BN_DIV3W) && !defined(OPENSSL_NO_ASM)
+		BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG);
+		q=bn_div_3_words(wnump,d1,d0);
+#else
+		BN_ULONG n0,n1,rem=0;
+
+		n0=wnump[0];
+		n1=wnump[-1];
+		if (n0 == d0)
+			q=BN_MASK2;
+		else 			/* n0 < d0 */
+			{
+#ifdef BN_LLONG
+			BN_ULLONG t2;
+
+#if defined(BN_LLONG) && defined(BN_DIV2W) && !defined(bn_div_words)
+			q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0);
+#else
+			q=bn_div_words(n0,n1,d0);
+#ifdef BN_DEBUG_LEVITTE
+			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
+X) -> 0x%08X\n",
+				n0, n1, d0, q);
+#endif
+#endif
+
+#ifndef REMAINDER_IS_ALREADY_CALCULATED
+			/*
+			 * rem doesn't have to be BN_ULLONG. The least we
+			 * know it's less that d0, isn't it?
+			 */
+			rem=(n1-q*d0)&BN_MASK2;
+#endif
+			t2=(BN_ULLONG)d1*q;
+
+			for (;;)
+				{
+				if (t2 <= ((((BN_ULLONG)rem)<<BN_BITS2)|wnump[-2]))
+					break;
+				q--;
+				rem += d0;
+				if (rem < d0) break; /* don't let rem overflow */
+				t2 -= d1;
+				}
+#else /* !BN_LLONG */
+			BN_ULONG t2l,t2h;
+
+			q=bn_div_words(n0,n1,d0);
+#ifdef BN_DEBUG_LEVITTE
+			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
+X) -> 0x%08X\n",
+				n0, n1, d0, q);
+#endif
+#ifndef REMAINDER_IS_ALREADY_CALCULATED
+			rem=(n1-q*d0)&BN_MASK2;
+#endif
+
+#if defined(BN_UMULT_LOHI)
+			BN_UMULT_LOHI(t2l,t2h,d1,q);
+#elif defined(BN_UMULT_HIGH)
+			t2l = d1 * q;
+			t2h = BN_UMULT_HIGH(d1,q);
+#else
+			{
+			BN_ULONG ql, qh;
+			t2l=LBITS(d1); t2h=HBITS(d1);
+			ql =LBITS(q);  qh =HBITS(q);
+			mul64(t2l,t2h,ql,qh); /* t2=(BN_ULLONG)d1*q; */
+			}
+#endif
+
+			for (;;)
+				{
+				if ((t2h < rem) ||
+					((t2h == rem) && (t2l <= wnump[-2])))
+					break;
+				q--;
+				rem += d0;
+				if (rem < d0) break; /* don't let rem overflow */
+				if (t2l < d1) t2h--; t2l -= d1;
+				}
+#endif /* !BN_LLONG */
+			}
+#endif /* !BN_DIV3W */
+
+		l0=bn_mul_words(tmp->d,sdiv->d,div_n,q);
+		tmp->d[div_n]=l0;
+		wnum.d--;
+		/* ingore top values of the bignums just sub the two 
+		 * BN_ULONG arrays with bn_sub_words */
+		if (bn_sub_words(wnum.d, wnum.d, tmp->d, div_n+1))
+			{
+			/* Note: As we have considered only the leading
+			 * two BN_ULONGs in the calculation of q, sdiv * q
+			 * might be greater than wnum (but then (q-1) * sdiv
+			 * is less or equal than wnum)
+			 */
+			q--;
+			if (bn_add_words(wnum.d, wnum.d, sdiv->d, div_n))
+				/* we can't have an overflow here (assuming
+				 * that q != 0, but if q == 0 then tmp is
+				 * zero anyway) */
+				(*wnump)++;
+			}
+		/* store part of the result */
+		*resp = q;
+		}
+	bn_correct_top(snum);
+	if (rm != NULL)
+		{
+		/* Keep a copy of the neg flag in num because if rm==num
+		 * BN_rshift() will overwrite it.
+		 */
+		int neg = num->neg;
+		BN_rshift(rm,snum,norm_shift);
+		if (!BN_is_zero(rm))
+			rm->neg = neg;
+		bn_check_top(rm);
+		}
+	bn_correct_top(res);
+	BN_CTX_end(ctx);
+	return(1);
+err:
+	bn_check_top(rm);
+	BN_CTX_end(ctx);
+	return(0);
+	}
+
+#endif
diff --git a/app/openssl/crypto/bn/bn_err.c b/app/openssl/crypto/bn/bn_err.c
new file mode 100644
index 00000000..cfe2eb94
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_err.c
@@ -0,0 +1,150 @@
+/* crypto/bn/bn_err.c */
+/* ====================================================================
+ * Copyright (c) 1999-2007 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+/* NOTE: this file was auto generated by the mkerr.pl script: any changes
+ * made to it will be overwritten when the script next updates this file,
+ * only reason strings will be preserved.
+ */
+
+#include <stdio.h>
+#include <openssl/err.h>
+#include <openssl/bn.h>
+
+/* BEGIN ERROR CODES */
+#ifndef OPENSSL_NO_ERR
+
+#define ERR_FUNC(func) ERR_PACK(ERR_LIB_BN,func,0)
+#define ERR_REASON(reason) ERR_PACK(ERR_LIB_BN,0,reason)
+
+static ERR_STRING_DATA BN_str_functs[]=
+	{
+{ERR_FUNC(BN_F_BNRAND),	"BNRAND"},
+{ERR_FUNC(BN_F_BN_BLINDING_CONVERT_EX),	"BN_BLINDING_convert_ex"},
+{ERR_FUNC(BN_F_BN_BLINDING_CREATE_PARAM),	"BN_BLINDING_create_param"},
+{ERR_FUNC(BN_F_BN_BLINDING_INVERT_EX),	"BN_BLINDING_invert_ex"},
+{ERR_FUNC(BN_F_BN_BLINDING_NEW),	"BN_BLINDING_new"},
+{ERR_FUNC(BN_F_BN_BLINDING_UPDATE),	"BN_BLINDING_update"},
+{ERR_FUNC(BN_F_BN_BN2DEC),	"BN_bn2dec"},
+{ERR_FUNC(BN_F_BN_BN2HEX),	"BN_bn2hex"},
+{ERR_FUNC(BN_F_BN_CTX_GET),	"BN_CTX_get"},
+{ERR_FUNC(BN_F_BN_CTX_NEW),	"BN_CTX_new"},
+{ERR_FUNC(BN_F_BN_CTX_START),	"BN_CTX_start"},
+{ERR_FUNC(BN_F_BN_DIV),	"BN_div"},
+{ERR_FUNC(BN_F_BN_DIV_NO_BRANCH),	"BN_div_no_branch"},
+{ERR_FUNC(BN_F_BN_DIV_RECP),	"BN_div_recp"},
+{ERR_FUNC(BN_F_BN_EXP),	"BN_exp"},
+{ERR_FUNC(BN_F_BN_EXPAND2),	"bn_expand2"},
+{ERR_FUNC(BN_F_BN_EXPAND_INTERNAL),	"BN_EXPAND_INTERNAL"},
+{ERR_FUNC(BN_F_BN_GF2M_MOD),	"BN_GF2m_mod"},
+{ERR_FUNC(BN_F_BN_GF2M_MOD_EXP),	"BN_GF2m_mod_exp"},
+{ERR_FUNC(BN_F_BN_GF2M_MOD_MUL),	"BN_GF2m_mod_mul"},
+{ERR_FUNC(BN_F_BN_GF2M_MOD_SOLVE_QUAD),	"BN_GF2m_mod_solve_quad"},
+{ERR_FUNC(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR),	"BN_GF2m_mod_solve_quad_arr"},
+{ERR_FUNC(BN_F_BN_GF2M_MOD_SQR),	"BN_GF2m_mod_sqr"},
+{ERR_FUNC(BN_F_BN_GF2M_MOD_SQRT),	"BN_GF2m_mod_sqrt"},
+{ERR_FUNC(BN_F_BN_MOD_EXP2_MONT),	"BN_mod_exp2_mont"},
+{ERR_FUNC(BN_F_BN_MOD_EXP_MONT),	"BN_mod_exp_mont"},
+{ERR_FUNC(BN_F_BN_MOD_EXP_MONT_CONSTTIME),	"BN_mod_exp_mont_consttime"},
+{ERR_FUNC(BN_F_BN_MOD_EXP_MONT_WORD),	"BN_mod_exp_mont_word"},
+{ERR_FUNC(BN_F_BN_MOD_EXP_RECP),	"BN_mod_exp_recp"},
+{ERR_FUNC(BN_F_BN_MOD_EXP_SIMPLE),	"BN_mod_exp_simple"},
+{ERR_FUNC(BN_F_BN_MOD_INVERSE),	"BN_mod_inverse"},
+{ERR_FUNC(BN_F_BN_MOD_INVERSE_NO_BRANCH),	"BN_mod_inverse_no_branch"},
+{ERR_FUNC(BN_F_BN_MOD_LSHIFT_QUICK),	"BN_mod_lshift_quick"},
+{ERR_FUNC(BN_F_BN_MOD_MUL_RECIPROCAL),	"BN_mod_mul_reciprocal"},
+{ERR_FUNC(BN_F_BN_MOD_SQRT),	"BN_mod_sqrt"},
+{ERR_FUNC(BN_F_BN_MPI2BN),	"BN_mpi2bn"},
+{ERR_FUNC(BN_F_BN_NEW),	"BN_new"},
+{ERR_FUNC(BN_F_BN_RAND),	"BN_rand"},
+{ERR_FUNC(BN_F_BN_RAND_RANGE),	"BN_rand_range"},
+{ERR_FUNC(BN_F_BN_USUB),	"BN_usub"},
+{0,NULL}
+	};
+
+static ERR_STRING_DATA BN_str_reasons[]=
+	{
+{ERR_REASON(BN_R_ARG2_LT_ARG3)           ,"arg2 lt arg3"},
+{ERR_REASON(BN_R_BAD_RECIPROCAL)         ,"bad reciprocal"},
+{ERR_REASON(BN_R_BIGNUM_TOO_LONG)        ,"bignum too long"},
+{ERR_REASON(BN_R_CALLED_WITH_EVEN_MODULUS),"called with even modulus"},
+{ERR_REASON(BN_R_DIV_BY_ZERO)            ,"div by zero"},
+{ERR_REASON(BN_R_ENCODING_ERROR)         ,"encoding error"},
+{ERR_REASON(BN_R_EXPAND_ON_STATIC_BIGNUM_DATA),"expand on static bignum data"},
+{ERR_REASON(BN_R_INPUT_NOT_REDUCED)      ,"input not reduced"},
+{ERR_REASON(BN_R_INVALID_LENGTH)         ,"invalid length"},
+{ERR_REASON(BN_R_INVALID_RANGE)          ,"invalid range"},
+{ERR_REASON(BN_R_NOT_A_SQUARE)           ,"not a square"},
+{ERR_REASON(BN_R_NOT_INITIALIZED)        ,"not initialized"},
+{ERR_REASON(BN_R_NO_INVERSE)             ,"no inverse"},
+{ERR_REASON(BN_R_NO_SOLUTION)            ,"no solution"},
+{ERR_REASON(BN_R_P_IS_NOT_PRIME)         ,"p is not prime"},
+{ERR_REASON(BN_R_TOO_MANY_ITERATIONS)    ,"too many iterations"},
+{ERR_REASON(BN_R_TOO_MANY_TEMPORARY_VARIABLES),"too many temporary variables"},
+{0,NULL}
+	};
+
+#endif
+
+void ERR_load_BN_strings(void)
+	{
+#ifndef OPENSSL_NO_ERR
+
+	if (ERR_func_error_string(BN_str_functs[0].error) == NULL)
+		{
+		ERR_load_strings(0,BN_str_functs);
+		ERR_load_strings(0,BN_str_reasons);
+		}
+#endif
+	}
diff --git a/app/openssl/crypto/bn/bn_exp.c b/app/openssl/crypto/bn/bn_exp.c
new file mode 100644
index 00000000..d9b6c737
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_exp.c
@@ -0,0 +1,991 @@
+/* crypto/bn/bn_exp.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+/* maximum precomputation table size for *variable* sliding windows */
+#define TABLE_SIZE	32
+
+/* this one works - simple but works */
+int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
+	{
+	int i,bits,ret=0;
+	BIGNUM *v,*rr;
+
+	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
+		{
+		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
+		BNerr(BN_F_BN_EXP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
+		return -1;
+		}
+
+	BN_CTX_start(ctx);
+	if ((r == a) || (r == p))
+		rr = BN_CTX_get(ctx);
+	else
+		rr = r;
+	v = BN_CTX_get(ctx);
+	if (rr == NULL || v == NULL) goto err;
+
+	if (BN_copy(v,a) == NULL) goto err;
+	bits=BN_num_bits(p);
+
+	if (BN_is_odd(p))
+		{ if (BN_copy(rr,a) == NULL) goto err; }
+	else	{ if (!BN_one(rr)) goto err; }
+
+	for (i=1; i<bits; i++)
+		{
+		if (!BN_sqr(v,v,ctx)) goto err;
+		if (BN_is_bit_set(p,i))
+			{
+			if (!BN_mul(rr,rr,v,ctx)) goto err;
+			}
+		}
+	ret=1;
+err:
+	if (r != rr) BN_copy(r,rr);
+	BN_CTX_end(ctx);
+	bn_check_top(r);
+	return(ret);
+	}
+
+
+int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
+	       BN_CTX *ctx)
+	{
+	int ret;
+
+	bn_check_top(a);
+	bn_check_top(p);
+	bn_check_top(m);
+
+	/* For even modulus  m = 2^k*m_odd,  it might make sense to compute
+	 * a^p mod m_odd  and  a^p mod 2^k  separately (with Montgomery
+	 * exponentiation for the odd part), using appropriate exponent
+	 * reductions, and combine the results using the CRT.
+	 *
+	 * For now, we use Montgomery only if the modulus is odd; otherwise,
+	 * exponentiation using the reciprocal-based quick remaindering
+	 * algorithm is used.
+	 *
+	 * (Timing obtained with expspeed.c [computations  a^p mod m
+	 * where  a, p, m  are of the same length: 256, 512, 1024, 2048,
+	 * 4096, 8192 bits], compared to the running time of the
+	 * standard algorithm:
+	 *
+	 *   BN_mod_exp_mont   33 .. 40 %  [AMD K6-2, Linux, debug configuration]
+         *                     55 .. 77 %  [UltraSparc processor, but
+	 *                                  debug-solaris-sparcv8-gcc conf.]
+	 * 
+	 *   BN_mod_exp_recp   50 .. 70 %  [AMD K6-2, Linux, debug configuration]
+	 *                     62 .. 118 % [UltraSparc, debug-solaris-sparcv8-gcc]
+	 *
+	 * On the Sparc, BN_mod_exp_recp was faster than BN_mod_exp_mont
+	 * at 2048 and more bits, but at 512 and 1024 bits, it was
+	 * slower even than the standard algorithm!
+	 *
+	 * "Real" timings [linux-elf, solaris-sparcv9-gcc configurations]
+	 * should be obtained when the new Montgomery reduction code
+	 * has been integrated into OpenSSL.)
+	 */
+
+#define MONT_MUL_MOD
+#define MONT_EXP_WORD
+#define RECP_MUL_MOD
+
+#ifdef MONT_MUL_MOD
+	/* I have finally been able to take out this pre-condition of
+	 * the top bit being set.  It was caused by an error in BN_div
+	 * with negatives.  There was also another problem when for a^b%m
+	 * a >= m.  eay 07-May-97 */
+/*	if ((m->d[m->top-1]&BN_TBIT) && BN_is_odd(m)) */
+
+	if (BN_is_odd(m))
+		{
+#  ifdef MONT_EXP_WORD
+		if (a->top == 1 && !a->neg && (BN_get_flags(p, BN_FLG_CONSTTIME) == 0))
+			{
+			BN_ULONG A = a->d[0];
+			ret=BN_mod_exp_mont_word(r,A,p,m,ctx,NULL);
+			}
+		else
+#  endif
+			ret=BN_mod_exp_mont(r,a,p,m,ctx,NULL);
+		}
+	else
+#endif
+#ifdef RECP_MUL_MOD
+		{ ret=BN_mod_exp_recp(r,a,p,m,ctx); }
+#else
+		{ ret=BN_mod_exp_simple(r,a,p,m,ctx); }
+#endif
+
+	bn_check_top(r);
+	return(ret);
+	}
+
+
+int BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+		    const BIGNUM *m, BN_CTX *ctx)
+	{
+	int i,j,bits,ret=0,wstart,wend,window,wvalue;
+	int start=1;
+	BIGNUM *aa;
+	/* Table of variables obtained from 'ctx' */
+	BIGNUM *val[TABLE_SIZE];
+	BN_RECP_CTX recp;
+
+	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
+		{
+		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
+		BNerr(BN_F_BN_MOD_EXP_RECP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
+		return -1;
+		}
+
+	bits=BN_num_bits(p);
+
+	if (bits == 0)
+		{
+		ret = BN_one(r);
+		return ret;
+		}
+
+	BN_CTX_start(ctx);
+	aa = BN_CTX_get(ctx);
+	val[0] = BN_CTX_get(ctx);
+	if(!aa || !val[0]) goto err;
+
+	BN_RECP_CTX_init(&recp);
+	if (m->neg)
+		{
+		/* ignore sign of 'm' */
+		if (!BN_copy(aa, m)) goto err;
+		aa->neg = 0;
+		if (BN_RECP_CTX_set(&recp,aa,ctx) <= 0) goto err;
+		}
+	else
+		{
+		if (BN_RECP_CTX_set(&recp,m,ctx) <= 0) goto err;
+		}
+
+	if (!BN_nnmod(val[0],a,m,ctx)) goto err;		/* 1 */
+	if (BN_is_zero(val[0]))
+		{
+		BN_zero(r);
+		ret = 1;
+		goto err;
+		}
+
+	window = BN_window_bits_for_exponent_size(bits);
+	if (window > 1)
+		{
+		if (!BN_mod_mul_reciprocal(aa,val[0],val[0],&recp,ctx))
+			goto err;				/* 2 */
+		j=1<<(window-1);
+		for (i=1; i<j; i++)
+			{
+			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
+					!BN_mod_mul_reciprocal(val[i],val[i-1],
+						aa,&recp,ctx))
+				goto err;
+			}
+		}
+		
+	start=1;	/* This is used to avoid multiplication etc
+			 * when there is only the value '1' in the
+			 * buffer. */
+	wvalue=0;	/* The 'value' of the window */
+	wstart=bits-1;	/* The top bit of the window */
+	wend=0;		/* The bottom bit of the window */
+
+	if (!BN_one(r)) goto err;
+
+	for (;;)
+		{
+		if (BN_is_bit_set(p,wstart) == 0)
+			{
+			if (!start)
+				if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
+				goto err;
+			if (wstart == 0) break;
+			wstart--;
+			continue;
+			}
+		/* We now have wstart on a 'set' bit, we now need to work out
+		 * how bit a window to do.  To do this we need to scan
+		 * forward until the last set bit before the end of the
+		 * window */
+		j=wstart;
+		wvalue=1;
+		wend=0;
+		for (i=1; i<window; i++)
+			{
+			if (wstart-i < 0) break;
+			if (BN_is_bit_set(p,wstart-i))
+				{
+				wvalue<<=(i-wend);
+				wvalue|=1;
+				wend=i;
+				}
+			}
+
+		/* wend is the size of the current window */
+		j=wend+1;
+		/* add the 'bytes above' */
+		if (!start)
+			for (i=0; i<j; i++)
+				{
+				if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
+					goto err;
+				}
+		
+		/* wvalue will be an odd number < 2^window */
+		if (!BN_mod_mul_reciprocal(r,r,val[wvalue>>1],&recp,ctx))
+			goto err;
+
+		/* move the 'window' down further */
+		wstart-=wend+1;
+		wvalue=0;
+		start=0;
+		if (wstart < 0) break;
+		}
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	BN_RECP_CTX_free(&recp);
+	bn_check_top(r);
+	return(ret);
+	}
+
+
+int BN_mod_exp_mont(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
+		    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
+	{
+	int i,j,bits,ret=0,wstart,wend,window,wvalue;
+	int start=1;
+	BIGNUM *d,*r;
+	const BIGNUM *aa;
+	/* Table of variables obtained from 'ctx' */
+	BIGNUM *val[TABLE_SIZE];
+	BN_MONT_CTX *mont=NULL;
+
+	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
+		{
+		return BN_mod_exp_mont_consttime(rr, a, p, m, ctx, in_mont);
+		}
+
+	bn_check_top(a);
+	bn_check_top(p);
+	bn_check_top(m);
+
+	if (!BN_is_odd(m))
+		{
+		BNerr(BN_F_BN_MOD_EXP_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
+		return(0);
+		}
+	bits=BN_num_bits(p);
+	if (bits == 0)
+		{
+		ret = BN_one(rr);
+		return ret;
+		}
+
+	BN_CTX_start(ctx);
+	d = BN_CTX_get(ctx);
+	r = BN_CTX_get(ctx);
+	val[0] = BN_CTX_get(ctx);
+	if (!d || !r || !val[0]) goto err;
+
+	/* If this is not done, things will break in the montgomery
+	 * part */
+
+	if (in_mont != NULL)
+		mont=in_mont;
+	else
+		{
+		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
+		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
+		}
+
+	if (a->neg || BN_ucmp(a,m) >= 0)
+		{
+		if (!BN_nnmod(val[0],a,m,ctx))
+			goto err;
+		aa= val[0];
+		}
+	else
+		aa=a;
+	if (BN_is_zero(aa))
+		{
+		BN_zero(rr);
+		ret = 1;
+		goto err;
+		}
+	if (!BN_to_montgomery(val[0],aa,mont,ctx)) goto err; /* 1 */
+
+	window = BN_window_bits_for_exponent_size(bits);
+	if (window > 1)
+		{
+		if (!BN_mod_mul_montgomery(d,val[0],val[0],mont,ctx)) goto err; /* 2 */
+		j=1<<(window-1);
+		for (i=1; i<j; i++)
+			{
+			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
+					!BN_mod_mul_montgomery(val[i],val[i-1],
+						d,mont,ctx))
+				goto err;
+			}
+		}
+
+	start=1;	/* This is used to avoid multiplication etc
+			 * when there is only the value '1' in the
+			 * buffer. */
+	wvalue=0;	/* The 'value' of the window */
+	wstart=bits-1;	/* The top bit of the window */
+	wend=0;		/* The bottom bit of the window */
+
+	if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
+	for (;;)
+		{
+		if (BN_is_bit_set(p,wstart) == 0)
+			{
+			if (!start)
+				{
+				if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
+				goto err;
+				}
+			if (wstart == 0) break;
+			wstart--;
+			continue;
+			}
+		/* We now have wstart on a 'set' bit, we now need to work out
+		 * how bit a window to do.  To do this we need to scan
+		 * forward until the last set bit before the end of the
+		 * window */
+		j=wstart;
+		wvalue=1;
+		wend=0;
+		for (i=1; i<window; i++)
+			{
+			if (wstart-i < 0) break;
+			if (BN_is_bit_set(p,wstart-i))
+				{
+				wvalue<<=(i-wend);
+				wvalue|=1;
+				wend=i;
+				}
+			}
+
+		/* wend is the size of the current window */
+		j=wend+1;
+		/* add the 'bytes above' */
+		if (!start)
+			for (i=0; i<j; i++)
+				{
+				if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
+					goto err;
+				}
+		
+		/* wvalue will be an odd number < 2^window */
+		if (!BN_mod_mul_montgomery(r,r,val[wvalue>>1],mont,ctx))
+			goto err;
+
+		/* move the 'window' down further */
+		wstart-=wend+1;
+		wvalue=0;
+		start=0;
+		if (wstart < 0) break;
+		}
+	if (!BN_from_montgomery(rr,r,mont,ctx)) goto err;
+	ret=1;
+err:
+	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
+	BN_CTX_end(ctx);
+	bn_check_top(rr);
+	return(ret);
+	}
+
+
+/* BN_mod_exp_mont_consttime() stores the precomputed powers in a specific layout
+ * so that accessing any of these table values shows the same access pattern as far
+ * as cache lines are concerned.  The following functions are used to transfer a BIGNUM
+ * from/to that table. */
+
+static int MOD_EXP_CTIME_COPY_TO_PREBUF(BIGNUM *b, int top, unsigned char *buf, int idx, int width)
+	{
+	size_t i, j;
+
+	if (bn_wexpand(b, top) == NULL)
+		return 0;
+	while (b->top < top)
+		{
+		b->d[b->top++] = 0;
+		}
+	
+	for (i = 0, j=idx; i < top * sizeof b->d[0]; i++, j+=width)
+		{
+		buf[j] = ((unsigned char*)b->d)[i];
+		}
+
+	bn_correct_top(b);
+	return 1;
+	}
+
+static int MOD_EXP_CTIME_COPY_FROM_PREBUF(BIGNUM *b, int top, unsigned char *buf, int idx, int width)
+	{
+	size_t i, j;
+
+	if (bn_wexpand(b, top) == NULL)
+		return 0;
+
+	for (i=0, j=idx; i < top * sizeof b->d[0]; i++, j+=width)
+		{
+		((unsigned char*)b->d)[i] = buf[j];
+		}
+
+	b->top = top;
+	bn_correct_top(b);
+	return 1;
+	}	
+
+/* Given a pointer value, compute the next address that is a cache line multiple. */
+#define MOD_EXP_CTIME_ALIGN(x_) \
+	((unsigned char*)(x_) + (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - (((BN_ULONG)(x_)) & (MOD_EXP_CTIME_MIN_CACHE_LINE_MASK))))
+
+/* This variant of BN_mod_exp_mont() uses fixed windows and the special
+ * precomputation memory layout to limit data-dependency to a minimum
+ * to protect secret exponents (cf. the hyper-threading timing attacks
+ * pointed out by Colin Percival,
+ * http://www.daemonology.net/hyperthreading-considered-harmful/)
+ */
+int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
+		    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
+	{
+	int i,bits,ret=0,idx,window,wvalue;
+	int top;
+ 	BIGNUM *r;
+	const BIGNUM *aa;
+	BN_MONT_CTX *mont=NULL;
+
+	int numPowers;
+	unsigned char *powerbufFree=NULL;
+	int powerbufLen = 0;
+	unsigned char *powerbuf=NULL;
+	BIGNUM *computeTemp=NULL, *am=NULL;
+
+	bn_check_top(a);
+	bn_check_top(p);
+	bn_check_top(m);
+
+	top = m->top;
+
+	if (!(m->d[0] & 1))
+		{
+		BNerr(BN_F_BN_MOD_EXP_MONT_CONSTTIME,BN_R_CALLED_WITH_EVEN_MODULUS);
+		return(0);
+		}
+	bits=BN_num_bits(p);
+	if (bits == 0)
+		{
+		ret = BN_one(rr);
+		return ret;
+		}
+
+ 	/* Initialize BIGNUM context and allocate intermediate result */
+	BN_CTX_start(ctx);
+	r = BN_CTX_get(ctx);
+	if (r == NULL) goto err;
+
+	/* Allocate a montgomery context if it was not supplied by the caller.
+	 * If this is not done, things will break in the montgomery part.
+ 	 */
+	if (in_mont != NULL)
+		mont=in_mont;
+	else
+		{
+		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
+		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
+		}
+
+	/* Get the window size to use with size of p. */
+	window = BN_window_bits_for_ctime_exponent_size(bits);
+
+	/* Allocate a buffer large enough to hold all of the pre-computed
+	 * powers of a.
+	 */
+	numPowers = 1 << window;
+	powerbufLen = sizeof(m->d[0])*top*numPowers;
+	if ((powerbufFree=(unsigned char*)OPENSSL_malloc(powerbufLen+MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH)) == NULL)
+		goto err;
+		
+	powerbuf = MOD_EXP_CTIME_ALIGN(powerbufFree);
+	memset(powerbuf, 0, powerbufLen);
+
+ 	/* Initialize the intermediate result. Do this early to save double conversion,
+	 * once each for a^0 and intermediate result.
+	 */
+ 	if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
+	if (!MOD_EXP_CTIME_COPY_TO_PREBUF(r, top, powerbuf, 0, numPowers)) goto err;
+
+	/* Initialize computeTemp as a^1 with montgomery precalcs */
+	computeTemp = BN_CTX_get(ctx);
+	am = BN_CTX_get(ctx);
+	if (computeTemp==NULL || am==NULL) goto err;
+
+	if (a->neg || BN_ucmp(a,m) >= 0)
+		{
+		if (!BN_mod(am,a,m,ctx))
+			goto err;
+		aa= am;
+		}
+	else
+		aa=a;
+	if (!BN_to_montgomery(am,aa,mont,ctx)) goto err;
+	if (!BN_copy(computeTemp, am)) goto err;
+	if (!MOD_EXP_CTIME_COPY_TO_PREBUF(am, top, powerbuf, 1, numPowers)) goto err;
+
+	/* If the window size is greater than 1, then calculate
+	 * val[i=2..2^winsize-1]. Powers are computed as a*a^(i-1)
+	 * (even powers could instead be computed as (a^(i/2))^2
+	 * to use the slight performance advantage of sqr over mul).
+	 */
+	if (window > 1)
+		{
+		for (i=2; i<numPowers; i++)
+			{
+			/* Calculate a^i = a^(i-1) * a */
+			if (!BN_mod_mul_montgomery(computeTemp,am,computeTemp,mont,ctx))
+				goto err;
+			if (!MOD_EXP_CTIME_COPY_TO_PREBUF(computeTemp, top, powerbuf, i, numPowers)) goto err;
+			}
+		}
+
+ 	/* Adjust the number of bits up to a multiple of the window size.
+ 	 * If the exponent length is not a multiple of the window size, then
+ 	 * this pads the most significant bits with zeros to normalize the
+ 	 * scanning loop to there's no special cases.
+ 	 *
+ 	 * * NOTE: Making the window size a power of two less than the native
+	 * * word size ensures that the padded bits won't go past the last
+ 	 * * word in the internal BIGNUM structure. Going past the end will
+ 	 * * still produce the correct result, but causes a different branch
+ 	 * * to be taken in the BN_is_bit_set function.
+ 	 */
+ 	bits = ((bits+window-1)/window)*window;
+ 	idx=bits-1;	/* The top bit of the window */
+
+ 	/* Scan the exponent one window at a time starting from the most
+ 	 * significant bits.
+ 	 */
+ 	while (idx >= 0)
+  		{
+ 		wvalue=0; /* The 'value' of the window */
+ 		
+ 		/* Scan the window, squaring the result as we go */
+ 		for (i=0; i<window; i++,idx--)
+ 			{
+			if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))	goto err;
+			wvalue = (wvalue<<1)+BN_is_bit_set(p,idx);
+  			}
+ 		
+		/* Fetch the appropriate pre-computed value from the pre-buf */
+		if (!MOD_EXP_CTIME_COPY_FROM_PREBUF(computeTemp, top, powerbuf, wvalue, numPowers)) goto err;
+
+ 		/* Multiply the result into the intermediate result */
+ 		if (!BN_mod_mul_montgomery(r,r,computeTemp,mont,ctx)) goto err;
+  		}
+
+ 	/* Convert the final result from montgomery to standard format */
+	if (!BN_from_montgomery(rr,r,mont,ctx)) goto err;
+	ret=1;
+err:
+	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
+	if (powerbuf!=NULL)
+		{
+		OPENSSL_cleanse(powerbuf,powerbufLen);
+		OPENSSL_free(powerbufFree);
+		}
+ 	if (am!=NULL) BN_clear(am);
+ 	if (computeTemp!=NULL) BN_clear(computeTemp);
+	BN_CTX_end(ctx);
+	return(ret);
+	}
+
+int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
+                         const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
+	{
+	BN_MONT_CTX *mont = NULL;
+	int b, bits, ret=0;
+	int r_is_one;
+	BN_ULONG w, next_w;
+	BIGNUM *d, *r, *t;
+	BIGNUM *swap_tmp;
+#define BN_MOD_MUL_WORD(r, w, m) \
+		(BN_mul_word(r, (w)) && \
+		(/* BN_ucmp(r, (m)) < 0 ? 1 :*/  \
+			(BN_mod(t, r, m, ctx) && (swap_tmp = r, r = t, t = swap_tmp, 1))))
+		/* BN_MOD_MUL_WORD is only used with 'w' large,
+		 * so the BN_ucmp test is probably more overhead
+		 * than always using BN_mod (which uses BN_copy if
+		 * a similar test returns true). */
+		/* We can use BN_mod and do not need BN_nnmod because our
+		 * accumulator is never negative (the result of BN_mod does
+		 * not depend on the sign of the modulus).
+		 */
+#define BN_TO_MONTGOMERY_WORD(r, w, mont) \
+		(BN_set_word(r, (w)) && BN_to_montgomery(r, r, (mont), ctx))
+
+	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
+		{
+		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
+		BNerr(BN_F_BN_MOD_EXP_MONT_WORD,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
+		return -1;
+		}
+
+	bn_check_top(p);
+	bn_check_top(m);
+
+	if (!BN_is_odd(m))
+		{
+		BNerr(BN_F_BN_MOD_EXP_MONT_WORD,BN_R_CALLED_WITH_EVEN_MODULUS);
+		return(0);
+		}
+	if (m->top == 1)
+		a %= m->d[0]; /* make sure that 'a' is reduced */
+
+	bits = BN_num_bits(p);
+	if (bits == 0)
+		{
+		ret = BN_one(rr);
+		return ret;
+		}
+	if (a == 0)
+		{
+		BN_zero(rr);
+		ret = 1;
+		return ret;
+		}
+
+	BN_CTX_start(ctx);
+	d = BN_CTX_get(ctx);
+	r = BN_CTX_get(ctx);
+	t = BN_CTX_get(ctx);
+	if (d == NULL || r == NULL || t == NULL) goto err;
+
+	if (in_mont != NULL)
+		mont=in_mont;
+	else
+		{
+		if ((mont = BN_MONT_CTX_new()) == NULL) goto err;
+		if (!BN_MONT_CTX_set(mont, m, ctx)) goto err;
+		}
+
+	r_is_one = 1; /* except for Montgomery factor */
+
+	/* bits-1 >= 0 */
+
+	/* The result is accumulated in the product r*w. */
+	w = a; /* bit 'bits-1' of 'p' is always set */
+	for (b = bits-2; b >= 0; b--)
+		{
+		/* First, square r*w. */
+		next_w = w*w;
+		if ((next_w/w) != w) /* overflow */
+			{
+			if (r_is_one)
+				{
+				if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
+				r_is_one = 0;
+				}
+			else
+				{
+				if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
+				}
+			next_w = 1;
+			}
+		w = next_w;
+		if (!r_is_one)
+			{
+			if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) goto err;
+			}
+
+		/* Second, multiply r*w by 'a' if exponent bit is set. */
+		if (BN_is_bit_set(p, b))
+			{
+			next_w = w*a;
+			if ((next_w/a) != w) /* overflow */
+				{
+				if (r_is_one)
+					{
+					if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
+					r_is_one = 0;
+					}
+				else
+					{
+					if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
+					}
+				next_w = a;
+				}
+			w = next_w;
+			}
+		}
+
+	/* Finally, set r:=r*w. */
+	if (w != 1)
+		{
+		if (r_is_one)
+			{
+			if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
+			r_is_one = 0;
+			}
+		else
+			{
+			if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
+			}
+		}
+
+	if (r_is_one) /* can happen only if a == 1*/
+		{
+		if (!BN_one(rr)) goto err;
+		}
+	else
+		{
+		if (!BN_from_montgomery(rr, r, mont, ctx)) goto err;
+		}
+	ret = 1;
+err:
+	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
+	BN_CTX_end(ctx);
+	bn_check_top(rr);
+	return(ret);
+	}
+
+
+/* The old fallback, simple version :-) */
+int BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+		const BIGNUM *m, BN_CTX *ctx)
+	{
+	int i,j,bits,ret=0,wstart,wend,window,wvalue;
+	int start=1;
+	BIGNUM *d;
+	/* Table of variables obtained from 'ctx' */
+	BIGNUM *val[TABLE_SIZE];
+
+	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
+		{
+		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
+		BNerr(BN_F_BN_MOD_EXP_SIMPLE,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
+		return -1;
+		}
+
+	bits=BN_num_bits(p);
+
+	if (bits == 0)
+		{
+		ret = BN_one(r);
+		return ret;
+		}
+
+	BN_CTX_start(ctx);
+	d = BN_CTX_get(ctx);
+	val[0] = BN_CTX_get(ctx);
+	if(!d || !val[0]) goto err;
+
+	if (!BN_nnmod(val[0],a,m,ctx)) goto err;		/* 1 */
+	if (BN_is_zero(val[0]))
+		{
+		BN_zero(r);
+		ret = 1;
+		goto err;
+		}
+
+	window = BN_window_bits_for_exponent_size(bits);
+	if (window > 1)
+		{
+		if (!BN_mod_mul(d,val[0],val[0],m,ctx))
+			goto err;				/* 2 */
+		j=1<<(window-1);
+		for (i=1; i<j; i++)
+			{
+			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
+					!BN_mod_mul(val[i],val[i-1],d,m,ctx))
+				goto err;
+			}
+		}
+
+	start=1;	/* This is used to avoid multiplication etc
+			 * when there is only the value '1' in the
+			 * buffer. */
+	wvalue=0;	/* The 'value' of the window */
+	wstart=bits-1;	/* The top bit of the window */
+	wend=0;		/* The bottom bit of the window */
+
+	if (!BN_one(r)) goto err;
+
+	for (;;)
+		{
+		if (BN_is_bit_set(p,wstart) == 0)
+			{
+			if (!start)
+				if (!BN_mod_mul(r,r,r,m,ctx))
+				goto err;
+			if (wstart == 0) break;
+			wstart--;
+			continue;
+			}
+		/* We now have wstart on a 'set' bit, we now need to work out
+		 * how bit a window to do.  To do this we need to scan
+		 * forward until the last set bit before the end of the
+		 * window */
+		j=wstart;
+		wvalue=1;
+		wend=0;
+		for (i=1; i<window; i++)
+			{
+			if (wstart-i < 0) break;
+			if (BN_is_bit_set(p,wstart-i))
+				{
+				wvalue<<=(i-wend);
+				wvalue|=1;
+				wend=i;
+				}
+			}
+
+		/* wend is the size of the current window */
+		j=wend+1;
+		/* add the 'bytes above' */
+		if (!start)
+			for (i=0; i<j; i++)
+				{
+				if (!BN_mod_mul(r,r,r,m,ctx))
+					goto err;
+				}
+		
+		/* wvalue will be an odd number < 2^window */
+		if (!BN_mod_mul(r,r,val[wvalue>>1],m,ctx))
+			goto err;
+
+		/* move the 'window' down further */
+		wstart-=wend+1;
+		wvalue=0;
+		start=0;
+		if (wstart < 0) break;
+		}
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	bn_check_top(r);
+	return(ret);
+	}
+
diff --git a/app/openssl/crypto/bn/bn_exp2.c b/app/openssl/crypto/bn/bn_exp2.c
new file mode 100644
index 00000000..bd0c34b9
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_exp2.c
@@ -0,0 +1,312 @@
+/* crypto/bn/bn_exp2.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+#define TABLE_SIZE	32
+
+int BN_mod_exp2_mont(BIGNUM *rr, const BIGNUM *a1, const BIGNUM *p1,
+	const BIGNUM *a2, const BIGNUM *p2, const BIGNUM *m,
+	BN_CTX *ctx, BN_MONT_CTX *in_mont)
+	{
+	int i,j,bits,b,bits1,bits2,ret=0,wpos1,wpos2,window1,window2,wvalue1,wvalue2;
+	int r_is_one=1;
+	BIGNUM *d,*r;
+	const BIGNUM *a_mod_m;
+	/* Tables of variables obtained from 'ctx' */
+	BIGNUM *val1[TABLE_SIZE], *val2[TABLE_SIZE];
+	BN_MONT_CTX *mont=NULL;
+
+	bn_check_top(a1);
+	bn_check_top(p1);
+	bn_check_top(a2);
+	bn_check_top(p2);
+	bn_check_top(m);
+
+	if (!(m->d[0] & 1))
+		{
+		BNerr(BN_F_BN_MOD_EXP2_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
+		return(0);
+		}
+	bits1=BN_num_bits(p1);
+	bits2=BN_num_bits(p2);
+	if ((bits1 == 0) && (bits2 == 0))
+		{
+		ret = BN_one(rr);
+		return ret;
+		}
+	
+	bits=(bits1 > bits2)?bits1:bits2;
+
+	BN_CTX_start(ctx);
+	d = BN_CTX_get(ctx);
+	r = BN_CTX_get(ctx);
+	val1[0] = BN_CTX_get(ctx);
+	val2[0] = BN_CTX_get(ctx);
+	if(!d || !r || !val1[0] || !val2[0]) goto err;
+
+	if (in_mont != NULL)
+		mont=in_mont;
+	else
+		{
+		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
+		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
+		}
+
+	window1 = BN_window_bits_for_exponent_size(bits1);
+	window2 = BN_window_bits_for_exponent_size(bits2);
+
+	/*
+	 * Build table for a1:   val1[i] := a1^(2*i + 1) mod m  for i = 0 .. 2^(window1-1)
+	 */
+	if (a1->neg || BN_ucmp(a1,m) >= 0)
+		{
+		if (!BN_mod(val1[0],a1,m,ctx))
+			goto err;
+		a_mod_m = val1[0];
+		}
+	else
+		a_mod_m = a1;
+	if (BN_is_zero(a_mod_m))
+		{
+		BN_zero(rr);
+		ret = 1;
+		goto err;
+		}
+
+	if (!BN_to_montgomery(val1[0],a_mod_m,mont,ctx)) goto err;
+	if (window1 > 1)
+		{
+		if (!BN_mod_mul_montgomery(d,val1[0],val1[0],mont,ctx)) goto err;
+
+		j=1<<(window1-1);
+		for (i=1; i<j; i++)
+			{
+			if(((val1[i] = BN_CTX_get(ctx)) == NULL) ||
+					!BN_mod_mul_montgomery(val1[i],val1[i-1],
+						d,mont,ctx))
+				goto err;
+			}
+		}
+
+
+	/*
+	 * Build table for a2:   val2[i] := a2^(2*i + 1) mod m  for i = 0 .. 2^(window2-1)
+	 */
+	if (a2->neg || BN_ucmp(a2,m) >= 0)
+		{
+		if (!BN_mod(val2[0],a2,m,ctx))
+			goto err;
+		a_mod_m = val2[0];
+		}
+	else
+		a_mod_m = a2;
+	if (BN_is_zero(a_mod_m))
+		{
+		BN_zero(rr);
+		ret = 1;
+		goto err;
+		}
+	if (!BN_to_montgomery(val2[0],a_mod_m,mont,ctx)) goto err;
+	if (window2 > 1)
+		{
+		if (!BN_mod_mul_montgomery(d,val2[0],val2[0],mont,ctx)) goto err;
+
+		j=1<<(window2-1);
+		for (i=1; i<j; i++)
+			{
+			if(((val2[i] = BN_CTX_get(ctx)) == NULL) ||
+					!BN_mod_mul_montgomery(val2[i],val2[i-1],
+						d,mont,ctx))
+				goto err;
+			}
+		}
+
+
+	/* Now compute the power product, using independent windows. */
+	r_is_one=1;
+	wvalue1=0;  /* The 'value' of the first window */
+	wvalue2=0;  /* The 'value' of the second window */
+	wpos1=0;    /* If wvalue1 > 0, the bottom bit of the first window */
+	wpos2=0;    /* If wvalue2 > 0, the bottom bit of the second window */
+
+	if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
+	for (b=bits-1; b>=0; b--)
+		{
+		if (!r_is_one)
+			{
+			if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
+				goto err;
+			}
+		
+		if (!wvalue1)
+			if (BN_is_bit_set(p1, b))
+				{
+				/* consider bits b-window1+1 .. b for this window */
+				i = b-window1+1;
+				while (!BN_is_bit_set(p1, i)) /* works for i<0 */
+					i++;
+				wpos1 = i;
+				wvalue1 = 1;
+				for (i = b-1; i >= wpos1; i--)
+					{
+					wvalue1 <<= 1;
+					if (BN_is_bit_set(p1, i))
+						wvalue1++;
+					}
+				}
+		
+		if (!wvalue2)
+			if (BN_is_bit_set(p2, b))
+				{
+				/* consider bits b-window2+1 .. b for this window */
+				i = b-window2+1;
+				while (!BN_is_bit_set(p2, i))
+					i++;
+				wpos2 = i;
+				wvalue2 = 1;
+				for (i = b-1; i >= wpos2; i--)
+					{
+					wvalue2 <<= 1;
+					if (BN_is_bit_set(p2, i))
+						wvalue2++;
+					}
+				}
+
+		if (wvalue1 && b == wpos1)
+			{
+			/* wvalue1 is odd and < 2^window1 */
+			if (!BN_mod_mul_montgomery(r,r,val1[wvalue1>>1],mont,ctx))
+				goto err;
+			wvalue1 = 0;
+			r_is_one = 0;
+			}
+		
+		if (wvalue2 && b == wpos2)
+			{
+			/* wvalue2 is odd and < 2^window2 */
+			if (!BN_mod_mul_montgomery(r,r,val2[wvalue2>>1],mont,ctx))
+				goto err;
+			wvalue2 = 0;
+			r_is_one = 0;
+			}
+		}
+	if (!BN_from_montgomery(rr,r,mont,ctx))
+		goto err;
+	ret=1;
+err:
+	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
+	BN_CTX_end(ctx);
+	bn_check_top(rr);
+	return(ret);
+	}
diff --git a/app/openssl/crypto/bn/bn_gcd.c b/app/openssl/crypto/bn/bn_gcd.c
new file mode 100644
index 00000000..4a352119
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_gcd.c
@@ -0,0 +1,654 @@
+/* crypto/bn/bn_gcd.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+static BIGNUM *euclid(BIGNUM *a, BIGNUM *b);
+
+int BN_gcd(BIGNUM *r, const BIGNUM *in_a, const BIGNUM *in_b, BN_CTX *ctx)
+	{
+	BIGNUM *a,*b,*t;
+	int ret=0;
+
+	bn_check_top(in_a);
+	bn_check_top(in_b);
+
+	BN_CTX_start(ctx);
+	a = BN_CTX_get(ctx);
+	b = BN_CTX_get(ctx);
+	if (a == NULL || b == NULL) goto err;
+
+	if (BN_copy(a,in_a) == NULL) goto err;
+	if (BN_copy(b,in_b) == NULL) goto err;
+	a->neg = 0;
+	b->neg = 0;
+
+	if (BN_cmp(a,b) < 0) { t=a; a=b; b=t; }
+	t=euclid(a,b);
+	if (t == NULL) goto err;
+
+	if (BN_copy(r,t) == NULL) goto err;
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	bn_check_top(r);
+	return(ret);
+	}
+
+static BIGNUM *euclid(BIGNUM *a, BIGNUM *b)
+	{
+	BIGNUM *t;
+	int shifts=0;
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	/* 0 <= b <= a */
+	while (!BN_is_zero(b))
+		{
+		/* 0 < b <= a */
+
+		if (BN_is_odd(a))
+			{
+			if (BN_is_odd(b))
+				{
+				if (!BN_sub(a,a,b)) goto err;
+				if (!BN_rshift1(a,a)) goto err;
+				if (BN_cmp(a,b) < 0)
+					{ t=a; a=b; b=t; }
+				}
+			else		/* a odd - b even */
+				{
+				if (!BN_rshift1(b,b)) goto err;
+				if (BN_cmp(a,b) < 0)
+					{ t=a; a=b; b=t; }
+				}
+			}
+		else			/* a is even */
+			{
+			if (BN_is_odd(b))
+				{
+				if (!BN_rshift1(a,a)) goto err;
+				if (BN_cmp(a,b) < 0)
+					{ t=a; a=b; b=t; }
+				}
+			else		/* a even - b even */
+				{
+				if (!BN_rshift1(a,a)) goto err;
+				if (!BN_rshift1(b,b)) goto err;
+				shifts++;
+				}
+			}
+		/* 0 <= b <= a */
+		}
+
+	if (shifts)
+		{
+		if (!BN_lshift(a,a,shifts)) goto err;
+		}
+	bn_check_top(a);
+	return(a);
+err:
+	return(NULL);
+	}
+
+
+/* solves ax == 1 (mod n) */
+static BIGNUM *BN_mod_inverse_no_branch(BIGNUM *in,
+        const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx);
+BIGNUM *BN_mod_inverse(BIGNUM *in,
+	const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx)
+	{
+	BIGNUM *A,*B,*X,*Y,*M,*D,*T,*R=NULL;
+	BIGNUM *ret=NULL;
+	int sign;
+
+	if ((BN_get_flags(a, BN_FLG_CONSTTIME) != 0) || (BN_get_flags(n, BN_FLG_CONSTTIME) != 0))
+		{
+		return BN_mod_inverse_no_branch(in, a, n, ctx);
+		}
+
+	bn_check_top(a);
+	bn_check_top(n);
+
+	BN_CTX_start(ctx);
+	A = BN_CTX_get(ctx);
+	B = BN_CTX_get(ctx);
+	X = BN_CTX_get(ctx);
+	D = BN_CTX_get(ctx);
+	M = BN_CTX_get(ctx);
+	Y = BN_CTX_get(ctx);
+	T = BN_CTX_get(ctx);
+	if (T == NULL) goto err;
+
+	if (in == NULL)
+		R=BN_new();
+	else
+		R=in;
+	if (R == NULL) goto err;
+
+	BN_one(X);
+	BN_zero(Y);
+	if (BN_copy(B,a) == NULL) goto err;
+	if (BN_copy(A,n) == NULL) goto err;
+	A->neg = 0;
+	if (B->neg || (BN_ucmp(B, A) >= 0))
+		{
+		if (!BN_nnmod(B, B, A, ctx)) goto err;
+		}
+	sign = -1;
+	/* From  B = a mod |n|,  A = |n|  it follows that
+	 *
+	 *      0 <= B < A,
+	 *     -sign*X*a  ==  B   (mod |n|),
+	 *      sign*Y*a  ==  A   (mod |n|).
+	 */
+
+	if (BN_is_odd(n) && (BN_num_bits(n) <= (BN_BITS <= 32 ? 450 : 2048)))
+		{
+		/* Binary inversion algorithm; requires odd modulus.
+		 * This is faster than the general algorithm if the modulus
+		 * is sufficiently small (about 400 .. 500 bits on 32-bit
+		 * sytems, but much more on 64-bit systems) */
+		int shift;
+		
+		while (!BN_is_zero(B))
+			{
+			/*
+			 *      0 < B < |n|,
+			 *      0 < A <= |n|,
+			 * (1) -sign*X*a  ==  B   (mod |n|),
+			 * (2)  sign*Y*a  ==  A   (mod |n|)
+			 */
+
+			/* Now divide  B  by the maximum possible power of two in the integers,
+			 * and divide  X  by the same value mod |n|.
+			 * When we're done, (1) still holds. */
+			shift = 0;
+			while (!BN_is_bit_set(B, shift)) /* note that 0 < B */
+				{
+				shift++;
+				
+				if (BN_is_odd(X))
+					{
+					if (!BN_uadd(X, X, n)) goto err;
+					}
+				/* now X is even, so we can easily divide it by two */
+				if (!BN_rshift1(X, X)) goto err;
+				}
+			if (shift > 0)
+				{
+				if (!BN_rshift(B, B, shift)) goto err;
+				}
+
+
+			/* Same for  A  and  Y.  Afterwards, (2) still holds. */
+			shift = 0;
+			while (!BN_is_bit_set(A, shift)) /* note that 0 < A */
+				{
+				shift++;
+				
+				if (BN_is_odd(Y))
+					{
+					if (!BN_uadd(Y, Y, n)) goto err;
+					}
+				/* now Y is even */
+				if (!BN_rshift1(Y, Y)) goto err;
+				}
+			if (shift > 0)
+				{
+				if (!BN_rshift(A, A, shift)) goto err;
+				}
+
+			
+			/* We still have (1) and (2).
+			 * Both  A  and  B  are odd.
+			 * The following computations ensure that
+			 *
+			 *     0 <= B < |n|,
+			 *      0 < A < |n|,
+			 * (1) -sign*X*a  ==  B   (mod |n|),
+			 * (2)  sign*Y*a  ==  A   (mod |n|),
+			 *
+			 * and that either  A  or  B  is even in the next iteration.
+			 */
+			if (BN_ucmp(B, A) >= 0)
+				{
+				/* -sign*(X + Y)*a == B - A  (mod |n|) */
+				if (!BN_uadd(X, X, Y)) goto err;
+				/* NB: we could use BN_mod_add_quick(X, X, Y, n), but that
+				 * actually makes the algorithm slower */
+				if (!BN_usub(B, B, A)) goto err;
+				}
+			else
+				{
+				/*  sign*(X + Y)*a == A - B  (mod |n|) */
+				if (!BN_uadd(Y, Y, X)) goto err;
+				/* as above, BN_mod_add_quick(Y, Y, X, n) would slow things down */
+				if (!BN_usub(A, A, B)) goto err;
+				}
+			}
+		}
+	else
+		{
+		/* general inversion algorithm */
+
+		while (!BN_is_zero(B))
+			{
+			BIGNUM *tmp;
+			
+			/*
+			 *      0 < B < A,
+			 * (*) -sign*X*a  ==  B   (mod |n|),
+			 *      sign*Y*a  ==  A   (mod |n|)
+			 */
+			
+			/* (D, M) := (A/B, A%B) ... */
+			if (BN_num_bits(A) == BN_num_bits(B))
+				{
+				if (!BN_one(D)) goto err;
+				if (!BN_sub(M,A,B)) goto err;
+				}
+			else if (BN_num_bits(A) == BN_num_bits(B) + 1)
+				{
+				/* A/B is 1, 2, or 3 */
+				if (!BN_lshift1(T,B)) goto err;
+				if (BN_ucmp(A,T) < 0)
+					{
+					/* A < 2*B, so D=1 */
+					if (!BN_one(D)) goto err;
+					if (!BN_sub(M,A,B)) goto err;
+					}
+				else
+					{
+					/* A >= 2*B, so D=2 or D=3 */
+					if (!BN_sub(M,A,T)) goto err;
+					if (!BN_add(D,T,B)) goto err; /* use D (:= 3*B) as temp */
+					if (BN_ucmp(A,D) < 0)
+						{
+						/* A < 3*B, so D=2 */
+						if (!BN_set_word(D,2)) goto err;
+						/* M (= A - 2*B) already has the correct value */
+						}
+					else
+						{
+						/* only D=3 remains */
+						if (!BN_set_word(D,3)) goto err;
+						/* currently  M = A - 2*B,  but we need  M = A - 3*B */
+						if (!BN_sub(M,M,B)) goto err;
+						}
+					}
+				}
+			else
+				{
+				if (!BN_div(D,M,A,B,ctx)) goto err;
+				}
+			
+			/* Now
+			 *      A = D*B + M;
+			 * thus we have
+			 * (**)  sign*Y*a  ==  D*B + M   (mod |n|).
+			 */
+			
+			tmp=A; /* keep the BIGNUM object, the value does not matter */
+			
+			/* (A, B) := (B, A mod B) ... */
+			A=B;
+			B=M;
+			/* ... so we have  0 <= B < A  again */
+			
+			/* Since the former  M  is now  B  and the former  B  is now  A,
+			 * (**) translates into
+			 *       sign*Y*a  ==  D*A + B    (mod |n|),
+			 * i.e.
+			 *       sign*Y*a - D*A  ==  B    (mod |n|).
+			 * Similarly, (*) translates into
+			 *      -sign*X*a  ==  A          (mod |n|).
+			 *
+			 * Thus,
+			 *   sign*Y*a + D*sign*X*a  ==  B  (mod |n|),
+			 * i.e.
+			 *        sign*(Y + D*X)*a  ==  B  (mod |n|).
+			 *
+			 * So if we set  (X, Y, sign) := (Y + D*X, X, -sign),  we arrive back at
+			 *      -sign*X*a  ==  B   (mod |n|),
+			 *       sign*Y*a  ==  A   (mod |n|).
+			 * Note that  X  and  Y  stay non-negative all the time.
+			 */
+			
+			/* most of the time D is very small, so we can optimize tmp := D*X+Y */
+			if (BN_is_one(D))
+				{
+				if (!BN_add(tmp,X,Y)) goto err;
+				}
+			else
+				{
+				if (BN_is_word(D,2))
+					{
+					if (!BN_lshift1(tmp,X)) goto err;
+					}
+				else if (BN_is_word(D,4))
+					{
+					if (!BN_lshift(tmp,X,2)) goto err;
+					}
+				else if (D->top == 1)
+					{
+					if (!BN_copy(tmp,X)) goto err;
+					if (!BN_mul_word(tmp,D->d[0])) goto err;
+					}
+				else
+					{
+					if (!BN_mul(tmp,D,X,ctx)) goto err;
+					}
+				if (!BN_add(tmp,tmp,Y)) goto err;
+				}
+			
+			M=Y; /* keep the BIGNUM object, the value does not matter */
+			Y=X;
+			X=tmp;
+			sign = -sign;
+			}
+		}
+		
+	/*
+	 * The while loop (Euclid's algorithm) ends when
+	 *      A == gcd(a,n);
+	 * we have
+	 *       sign*Y*a  ==  A  (mod |n|),
+	 * where  Y  is non-negative.
+	 */
+
+	if (sign < 0)
+		{
+		if (!BN_sub(Y,n,Y)) goto err;
+		}
+	/* Now  Y*a  ==  A  (mod |n|).  */
+	
+
+	if (BN_is_one(A))
+		{
+		/* Y*a == 1  (mod |n|) */
+		if (!Y->neg && BN_ucmp(Y,n) < 0)
+			{
+			if (!BN_copy(R,Y)) goto err;
+			}
+		else
+			{
+			if (!BN_nnmod(R,Y,n,ctx)) goto err;
+			}
+		}
+	else
+		{
+		BNerr(BN_F_BN_MOD_INVERSE,BN_R_NO_INVERSE);
+		goto err;
+		}
+	ret=R;
+err:
+	if ((ret == NULL) && (in == NULL)) BN_free(R);
+	BN_CTX_end(ctx);
+	bn_check_top(ret);
+	return(ret);
+	}
+
+
+/* BN_mod_inverse_no_branch is a special version of BN_mod_inverse. 
+ * It does not contain branches that may leak sensitive information.
+ */
+static BIGNUM *BN_mod_inverse_no_branch(BIGNUM *in,
+	const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx)
+	{
+	BIGNUM *A,*B,*X,*Y,*M,*D,*T,*R=NULL;
+	BIGNUM local_A, local_B;
+	BIGNUM *pA, *pB;
+	BIGNUM *ret=NULL;
+	int sign;
+
+	bn_check_top(a);
+	bn_check_top(n);
+
+	BN_CTX_start(ctx);
+	A = BN_CTX_get(ctx);
+	B = BN_CTX_get(ctx);
+	X = BN_CTX_get(ctx);
+	D = BN_CTX_get(ctx);
+	M = BN_CTX_get(ctx);
+	Y = BN_CTX_get(ctx);
+	T = BN_CTX_get(ctx);
+	if (T == NULL) goto err;
+
+	if (in == NULL)
+		R=BN_new();
+	else
+		R=in;
+	if (R == NULL) goto err;
+
+	BN_one(X);
+	BN_zero(Y);
+	if (BN_copy(B,a) == NULL) goto err;
+	if (BN_copy(A,n) == NULL) goto err;
+	A->neg = 0;
+
+	if (B->neg || (BN_ucmp(B, A) >= 0))
+		{
+		/* Turn BN_FLG_CONSTTIME flag on, so that when BN_div is invoked,
+	 	 * BN_div_no_branch will be called eventually.
+	 	 */
+		pB = &local_B;
+		BN_with_flags(pB, B, BN_FLG_CONSTTIME);	
+		if (!BN_nnmod(B, pB, A, ctx)) goto err;
+		}
+	sign = -1;
+	/* From  B = a mod |n|,  A = |n|  it follows that
+	 *
+	 *      0 <= B < A,
+	 *     -sign*X*a  ==  B   (mod |n|),
+	 *      sign*Y*a  ==  A   (mod |n|).
+	 */
+
+	while (!BN_is_zero(B))
+		{
+		BIGNUM *tmp;
+		
+		/*
+		 *      0 < B < A,
+		 * (*) -sign*X*a  ==  B   (mod |n|),
+		 *      sign*Y*a  ==  A   (mod |n|)
+		 */
+
+		/* Turn BN_FLG_CONSTTIME flag on, so that when BN_div is invoked,
+	 	 * BN_div_no_branch will be called eventually.
+	 	 */
+		pA = &local_A;
+		BN_with_flags(pA, A, BN_FLG_CONSTTIME);	
+		
+		/* (D, M) := (A/B, A%B) ... */		
+		if (!BN_div(D,M,pA,B,ctx)) goto err;
+		
+		/* Now
+		 *      A = D*B + M;
+		 * thus we have
+		 * (**)  sign*Y*a  ==  D*B + M   (mod |n|).
+		 */
+		
+		tmp=A; /* keep the BIGNUM object, the value does not matter */
+		
+		/* (A, B) := (B, A mod B) ... */
+		A=B;
+		B=M;
+		/* ... so we have  0 <= B < A  again */
+		
+		/* Since the former  M  is now  B  and the former  B  is now  A,
+		 * (**) translates into
+		 *       sign*Y*a  ==  D*A + B    (mod |n|),
+		 * i.e.
+		 *       sign*Y*a - D*A  ==  B    (mod |n|).
+		 * Similarly, (*) translates into
+		 *      -sign*X*a  ==  A          (mod |n|).
+		 *
+		 * Thus,
+		 *   sign*Y*a + D*sign*X*a  ==  B  (mod |n|),
+		 * i.e.
+		 *        sign*(Y + D*X)*a  ==  B  (mod |n|).
+		 *
+		 * So if we set  (X, Y, sign) := (Y + D*X, X, -sign),  we arrive back at
+		 *      -sign*X*a  ==  B   (mod |n|),
+		 *       sign*Y*a  ==  A   (mod |n|).
+		 * Note that  X  and  Y  stay non-negative all the time.
+		 */
+			
+		if (!BN_mul(tmp,D,X,ctx)) goto err;
+		if (!BN_add(tmp,tmp,Y)) goto err;
+
+		M=Y; /* keep the BIGNUM object, the value does not matter */
+		Y=X;
+		X=tmp;
+		sign = -sign;
+		}
+		
+	/*
+	 * The while loop (Euclid's algorithm) ends when
+	 *      A == gcd(a,n);
+	 * we have
+	 *       sign*Y*a  ==  A  (mod |n|),
+	 * where  Y  is non-negative.
+	 */
+
+	if (sign < 0)
+		{
+		if (!BN_sub(Y,n,Y)) goto err;
+		}
+	/* Now  Y*a  ==  A  (mod |n|).  */
+
+	if (BN_is_one(A))
+		{
+		/* Y*a == 1  (mod |n|) */
+		if (!Y->neg && BN_ucmp(Y,n) < 0)
+			{
+			if (!BN_copy(R,Y)) goto err;
+			}
+		else
+			{
+			if (!BN_nnmod(R,Y,n,ctx)) goto err;
+			}
+		}
+	else
+		{
+		BNerr(BN_F_BN_MOD_INVERSE_NO_BRANCH,BN_R_NO_INVERSE);
+		goto err;
+		}
+	ret=R;
+err:
+	if ((ret == NULL) && (in == NULL)) BN_free(R);
+	BN_CTX_end(ctx);
+	bn_check_top(ret);
+	return(ret);
+	}
diff --git a/app/openssl/crypto/bn/bn_gf2m.c b/app/openssl/crypto/bn/bn_gf2m.c
new file mode 100644
index 00000000..432a3aa3
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_gf2m.c
@@ -0,0 +1,1035 @@
+/* crypto/bn/bn_gf2m.c */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ *
+ * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
+ * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
+ * to the OpenSSL project.
+ *
+ * The ECC Code is licensed pursuant to the OpenSSL open source
+ * license provided below.
+ *
+ * In addition, Sun covenants to all licensees who provide a reciprocal
+ * covenant with respect to their own patents if any, not to sue under
+ * current and future patent claims necessarily infringed by the making,
+ * using, practicing, selling, offering for sale and/or otherwise
+ * disposing of the ECC Code as delivered hereunder (or portions thereof),
+ * provided that such covenant shall not apply:
+ *  1) for code that a licensee deletes from the ECC Code;
+ *  2) separates from the ECC Code; or
+ *  3) for infringements caused by:
+ *       i) the modification of the ECC Code or
+ *      ii) the combination of the ECC Code with other software or
+ *          devices where such combination causes the infringement.
+ *
+ * The software is originally written by Sheueling Chang Shantz and
+ * Douglas Stebila of Sun Microsystems Laboratories.
+ *
+ */
+
+/* NOTE: This file is licensed pursuant to the OpenSSL license below
+ * and may be modified; but after modifications, the above covenant
+ * may no longer apply!  In such cases, the corresponding paragraph
+ * ["In addition, Sun covenants ... causes the infringement."] and
+ * this note can be edited out; but please keep the Sun copyright
+ * notice and attribution. */
+
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <assert.h>
+#include <limits.h>
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+/* Maximum number of iterations before BN_GF2m_mod_solve_quad_arr should fail. */
+#define MAX_ITERATIONS 50
+
+static const BN_ULONG SQR_tb[16] =
+  {     0,     1,     4,     5,    16,    17,    20,    21,
+       64,    65,    68,    69,    80,    81,    84,    85 };
+/* Platform-specific macros to accelerate squaring. */
+#if defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
+#define SQR1(w) \
+    SQR_tb[(w) >> 60 & 0xF] << 56 | SQR_tb[(w) >> 56 & 0xF] << 48 | \
+    SQR_tb[(w) >> 52 & 0xF] << 40 | SQR_tb[(w) >> 48 & 0xF] << 32 | \
+    SQR_tb[(w) >> 44 & 0xF] << 24 | SQR_tb[(w) >> 40 & 0xF] << 16 | \
+    SQR_tb[(w) >> 36 & 0xF] <<  8 | SQR_tb[(w) >> 32 & 0xF]
+#define SQR0(w) \
+    SQR_tb[(w) >> 28 & 0xF] << 56 | SQR_tb[(w) >> 24 & 0xF] << 48 | \
+    SQR_tb[(w) >> 20 & 0xF] << 40 | SQR_tb[(w) >> 16 & 0xF] << 32 | \
+    SQR_tb[(w) >> 12 & 0xF] << 24 | SQR_tb[(w) >>  8 & 0xF] << 16 | \
+    SQR_tb[(w) >>  4 & 0xF] <<  8 | SQR_tb[(w)       & 0xF]
+#endif
+#ifdef THIRTY_TWO_BIT
+#define SQR1(w) \
+    SQR_tb[(w) >> 28 & 0xF] << 24 | SQR_tb[(w) >> 24 & 0xF] << 16 | \
+    SQR_tb[(w) >> 20 & 0xF] <<  8 | SQR_tb[(w) >> 16 & 0xF]
+#define SQR0(w) \
+    SQR_tb[(w) >> 12 & 0xF] << 24 | SQR_tb[(w) >>  8 & 0xF] << 16 | \
+    SQR_tb[(w) >>  4 & 0xF] <<  8 | SQR_tb[(w)       & 0xF]
+#endif
+
+/* Product of two polynomials a, b each with degree < BN_BITS2 - 1,
+ * result is a polynomial r with degree < 2 * BN_BITS - 1
+ * The caller MUST ensure that the variables have the right amount
+ * of space allocated.
+ */
+#ifdef THIRTY_TWO_BIT
+static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b)
+	{
+	register BN_ULONG h, l, s;
+	BN_ULONG tab[8], top2b = a >> 30; 
+	register BN_ULONG a1, a2, a4;
+
+	a1 = a & (0x3FFFFFFF); a2 = a1 << 1; a4 = a2 << 1;
+
+	tab[0] =  0; tab[1] = a1;    tab[2] = a2;    tab[3] = a1^a2;
+	tab[4] = a4; tab[5] = a1^a4; tab[6] = a2^a4; tab[7] = a1^a2^a4;
+
+	s = tab[b       & 0x7]; l  = s;
+	s = tab[b >>  3 & 0x7]; l ^= s <<  3; h  = s >> 29;
+	s = tab[b >>  6 & 0x7]; l ^= s <<  6; h ^= s >> 26;
+	s = tab[b >>  9 & 0x7]; l ^= s <<  9; h ^= s >> 23;
+	s = tab[b >> 12 & 0x7]; l ^= s << 12; h ^= s >> 20;
+	s = tab[b >> 15 & 0x7]; l ^= s << 15; h ^= s >> 17;
+	s = tab[b >> 18 & 0x7]; l ^= s << 18; h ^= s >> 14;
+	s = tab[b >> 21 & 0x7]; l ^= s << 21; h ^= s >> 11;
+	s = tab[b >> 24 & 0x7]; l ^= s << 24; h ^= s >>  8;
+	s = tab[b >> 27 & 0x7]; l ^= s << 27; h ^= s >>  5;
+	s = tab[b >> 30      ]; l ^= s << 30; h ^= s >>  2;
+
+	/* compensate for the top two bits of a */
+
+	if (top2b & 01) { l ^= b << 30; h ^= b >> 2; } 
+	if (top2b & 02) { l ^= b << 31; h ^= b >> 1; } 
+
+	*r1 = h; *r0 = l;
+	} 
+#endif
+#if defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
+static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b)
+	{
+	register BN_ULONG h, l, s;
+	BN_ULONG tab[16], top3b = a >> 61;
+	register BN_ULONG a1, a2, a4, a8;
+
+	a1 = a & (0x1FFFFFFFFFFFFFFFULL); a2 = a1 << 1; a4 = a2 << 1; a8 = a4 << 1;
+
+	tab[ 0] = 0;     tab[ 1] = a1;       tab[ 2] = a2;       tab[ 3] = a1^a2;
+	tab[ 4] = a4;    tab[ 5] = a1^a4;    tab[ 6] = a2^a4;    tab[ 7] = a1^a2^a4;
+	tab[ 8] = a8;    tab[ 9] = a1^a8;    tab[10] = a2^a8;    tab[11] = a1^a2^a8;
+	tab[12] = a4^a8; tab[13] = a1^a4^a8; tab[14] = a2^a4^a8; tab[15] = a1^a2^a4^a8;
+
+	s = tab[b       & 0xF]; l  = s;
+	s = tab[b >>  4 & 0xF]; l ^= s <<  4; h  = s >> 60;
+	s = tab[b >>  8 & 0xF]; l ^= s <<  8; h ^= s >> 56;
+	s = tab[b >> 12 & 0xF]; l ^= s << 12; h ^= s >> 52;
+	s = tab[b >> 16 & 0xF]; l ^= s << 16; h ^= s >> 48;
+	s = tab[b >> 20 & 0xF]; l ^= s << 20; h ^= s >> 44;
+	s = tab[b >> 24 & 0xF]; l ^= s << 24; h ^= s >> 40;
+	s = tab[b >> 28 & 0xF]; l ^= s << 28; h ^= s >> 36;
+	s = tab[b >> 32 & 0xF]; l ^= s << 32; h ^= s >> 32;
+	s = tab[b >> 36 & 0xF]; l ^= s << 36; h ^= s >> 28;
+	s = tab[b >> 40 & 0xF]; l ^= s << 40; h ^= s >> 24;
+	s = tab[b >> 44 & 0xF]; l ^= s << 44; h ^= s >> 20;
+	s = tab[b >> 48 & 0xF]; l ^= s << 48; h ^= s >> 16;
+	s = tab[b >> 52 & 0xF]; l ^= s << 52; h ^= s >> 12;
+	s = tab[b >> 56 & 0xF]; l ^= s << 56; h ^= s >>  8;
+	s = tab[b >> 60      ]; l ^= s << 60; h ^= s >>  4;
+
+	/* compensate for the top three bits of a */
+
+	if (top3b & 01) { l ^= b << 61; h ^= b >> 3; } 
+	if (top3b & 02) { l ^= b << 62; h ^= b >> 2; } 
+	if (top3b & 04) { l ^= b << 63; h ^= b >> 1; } 
+
+	*r1 = h; *r0 = l;
+	} 
+#endif
+
+/* Product of two polynomials a, b each with degree < 2 * BN_BITS2 - 1,
+ * result is a polynomial r with degree < 4 * BN_BITS2 - 1
+ * The caller MUST ensure that the variables have the right amount
+ * of space allocated.
+ */
+static void bn_GF2m_mul_2x2(BN_ULONG *r, const BN_ULONG a1, const BN_ULONG a0, const BN_ULONG b1, const BN_ULONG b0)
+	{
+	BN_ULONG m1, m0;
+	/* r[3] = h1, r[2] = h0; r[1] = l1; r[0] = l0 */
+	bn_GF2m_mul_1x1(r+3, r+2, a1, b1);
+	bn_GF2m_mul_1x1(r+1, r, a0, b0);
+	bn_GF2m_mul_1x1(&m1, &m0, a0 ^ a1, b0 ^ b1);
+	/* Correction on m1 ^= l1 ^ h1; m0 ^= l0 ^ h0; */
+	r[2] ^= m1 ^ r[1] ^ r[3];  /* h0 ^= m1 ^ l1 ^ h1; */
+	r[1] = r[3] ^ r[2] ^ r[0] ^ m1 ^ m0;  /* l1 ^= l0 ^ h0 ^ m0; */
+	}
+
+
+/* Add polynomials a and b and store result in r; r could be a or b, a and b 
+ * could be equal; r is the bitwise XOR of a and b.
+ */
+int	BN_GF2m_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
+	{
+	int i;
+	const BIGNUM *at, *bt;
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	if (a->top < b->top) { at = b; bt = a; }
+	else { at = a; bt = b; }
+
+	if(bn_wexpand(r, at->top) == NULL)
+		return 0;
+
+	for (i = 0; i < bt->top; i++)
+		{
+		r->d[i] = at->d[i] ^ bt->d[i];
+		}
+	for (; i < at->top; i++)
+		{
+		r->d[i] = at->d[i];
+		}
+	
+	r->top = at->top;
+	bn_correct_top(r);
+	
+	return 1;
+	}
+
+
+/* Some functions allow for representation of the irreducible polynomials
+ * as an int[], say p.  The irreducible f(t) is then of the form:
+ *     t^p[0] + t^p[1] + ... + t^p[k]
+ * where m = p[0] > p[1] > ... > p[k] = 0.
+ */
+
+
+/* Performs modular reduction of a and store result in r.  r could be a. */
+int BN_GF2m_mod_arr(BIGNUM *r, const BIGNUM *a, const int p[])
+	{
+	int j, k;
+	int n, dN, d0, d1;
+	BN_ULONG zz, *z;
+
+	bn_check_top(a);
+
+	if (!p[0])
+		{
+		/* reduction mod 1 => return 0 */
+		BN_zero(r);
+		return 1;
+		}
+
+	/* Since the algorithm does reduction in the r value, if a != r, copy
+	 * the contents of a into r so we can do reduction in r. 
+	 */
+	if (a != r)
+		{
+		if (!bn_wexpand(r, a->top)) return 0;
+		for (j = 0; j < a->top; j++)
+			{
+			r->d[j] = a->d[j];
+			}
+		r->top = a->top;
+		}
+	z = r->d;
+
+	/* start reduction */
+	dN = p[0] / BN_BITS2;  
+	for (j = r->top - 1; j > dN;)
+		{
+		zz = z[j];
+		if (z[j] == 0) { j--; continue; }
+		z[j] = 0;
+
+		for (k = 1; p[k] != 0; k++)
+			{
+			/* reducing component t^p[k] */
+			n = p[0] - p[k];
+			d0 = n % BN_BITS2;  d1 = BN_BITS2 - d0;
+			n /= BN_BITS2; 
+			z[j-n] ^= (zz>>d0);
+			if (d0) z[j-n-1] ^= (zz<<d1);
+			}
+
+		/* reducing component t^0 */
+		n = dN;  
+		d0 = p[0] % BN_BITS2;
+		d1 = BN_BITS2 - d0;
+		z[j-n] ^= (zz >> d0);
+		if (d0) z[j-n-1] ^= (zz << d1);
+		}
+
+	/* final round of reduction */
+	while (j == dN)
+		{
+
+		d0 = p[0] % BN_BITS2;
+		zz = z[dN] >> d0;
+		if (zz == 0) break;
+		d1 = BN_BITS2 - d0;
+		
+		/* clear up the top d1 bits */
+		if (d0)
+			z[dN] = (z[dN] << d1) >> d1;
+		else
+			z[dN] = 0;
+		z[0] ^= zz; /* reduction t^0 component */
+
+		for (k = 1; p[k] != 0; k++)
+			{
+			BN_ULONG tmp_ulong;
+
+			/* reducing component t^p[k]*/
+			n = p[k] / BN_BITS2;   
+			d0 = p[k] % BN_BITS2;
+			d1 = BN_BITS2 - d0;
+			z[n] ^= (zz << d0);
+			tmp_ulong = zz >> d1;
+                        if (d0 && tmp_ulong)
+                                z[n+1] ^= tmp_ulong;
+			}
+
+		
+		}
+
+	bn_correct_top(r);
+	return 1;
+	}
+
+/* Performs modular reduction of a by p and store result in r.  r could be a.
+ *
+ * This function calls down to the BN_GF2m_mod_arr implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_arr function.
+ */
+int	BN_GF2m_mod(BIGNUM *r, const BIGNUM *a, const BIGNUM *p)
+	{
+	int ret = 0;
+	const int max = BN_num_bits(p) + 1;
+	int *arr=NULL;
+	bn_check_top(a);
+	bn_check_top(p);
+	if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err;
+	ret = BN_GF2m_poly2arr(p, arr, max);
+	if (!ret || ret > max)
+		{
+		BNerr(BN_F_BN_GF2M_MOD,BN_R_INVALID_LENGTH);
+		goto err;
+		}
+	ret = BN_GF2m_mod_arr(r, a, arr);
+	bn_check_top(r);
+err:
+	if (arr) OPENSSL_free(arr);
+	return ret;
+	}
+
+
+/* Compute the product of two polynomials a and b, reduce modulo p, and store
+ * the result in r.  r could be a or b; a could be b.
+ */
+int	BN_GF2m_mod_mul_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const int p[], BN_CTX *ctx)
+	{
+	int zlen, i, j, k, ret = 0;
+	BIGNUM *s;
+	BN_ULONG x1, x0, y1, y0, zz[4];
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	if (a == b)
+		{
+		return BN_GF2m_mod_sqr_arr(r, a, p, ctx);
+		}
+
+	BN_CTX_start(ctx);
+	if ((s = BN_CTX_get(ctx)) == NULL) goto err;
+	
+	zlen = a->top + b->top + 4;
+	if (!bn_wexpand(s, zlen)) goto err;
+	s->top = zlen;
+
+	for (i = 0; i < zlen; i++) s->d[i] = 0;
+
+	for (j = 0; j < b->top; j += 2)
+		{
+		y0 = b->d[j];
+		y1 = ((j+1) == b->top) ? 0 : b->d[j+1];
+		for (i = 0; i < a->top; i += 2)
+			{
+			x0 = a->d[i];
+			x1 = ((i+1) == a->top) ? 0 : a->d[i+1];
+			bn_GF2m_mul_2x2(zz, x1, x0, y1, y0);
+			for (k = 0; k < 4; k++) s->d[i+j+k] ^= zz[k];
+			}
+		}
+
+	bn_correct_top(s);
+	if (BN_GF2m_mod_arr(r, s, p))
+		ret = 1;
+	bn_check_top(r);
+
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+/* Compute the product of two polynomials a and b, reduce modulo p, and store
+ * the result in r.  r could be a or b; a could equal b.
+ *
+ * This function calls down to the BN_GF2m_mod_mul_arr implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_mul_arr function.
+ */
+int	BN_GF2m_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *p, BN_CTX *ctx)
+	{
+	int ret = 0;
+	const int max = BN_num_bits(p) + 1;
+	int *arr=NULL;
+	bn_check_top(a);
+	bn_check_top(b);
+	bn_check_top(p);
+	if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err;
+	ret = BN_GF2m_poly2arr(p, arr, max);
+	if (!ret || ret > max)
+		{
+		BNerr(BN_F_BN_GF2M_MOD_MUL,BN_R_INVALID_LENGTH);
+		goto err;
+		}
+	ret = BN_GF2m_mod_mul_arr(r, a, b, arr, ctx);
+	bn_check_top(r);
+err:
+	if (arr) OPENSSL_free(arr);
+	return ret;
+	}
+
+
+/* Square a, reduce the result mod p, and store it in a.  r could be a. */
+int	BN_GF2m_mod_sqr_arr(BIGNUM *r, const BIGNUM *a, const int p[], BN_CTX *ctx)
+	{
+	int i, ret = 0;
+	BIGNUM *s;
+
+	bn_check_top(a);
+	BN_CTX_start(ctx);
+	if ((s = BN_CTX_get(ctx)) == NULL) return 0;
+	if (!bn_wexpand(s, 2 * a->top)) goto err;
+
+	for (i = a->top - 1; i >= 0; i--)
+		{
+		s->d[2*i+1] = SQR1(a->d[i]);
+		s->d[2*i  ] = SQR0(a->d[i]);
+		}
+
+	s->top = 2 * a->top;
+	bn_correct_top(s);
+	if (!BN_GF2m_mod_arr(r, s, p)) goto err;
+	bn_check_top(r);
+	ret = 1;
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+/* Square a, reduce the result mod p, and store it in a.  r could be a.
+ *
+ * This function calls down to the BN_GF2m_mod_sqr_arr implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_sqr_arr function.
+ */
+int	BN_GF2m_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
+	{
+	int ret = 0;
+	const int max = BN_num_bits(p) + 1;
+	int *arr=NULL;
+
+	bn_check_top(a);
+	bn_check_top(p);
+	if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err;
+	ret = BN_GF2m_poly2arr(p, arr, max);
+	if (!ret || ret > max)
+		{
+		BNerr(BN_F_BN_GF2M_MOD_SQR,BN_R_INVALID_LENGTH);
+		goto err;
+		}
+	ret = BN_GF2m_mod_sqr_arr(r, a, arr, ctx);
+	bn_check_top(r);
+err:
+	if (arr) OPENSSL_free(arr);
+	return ret;
+	}
+
+
+/* Invert a, reduce modulo p, and store the result in r. r could be a. 
+ * Uses Modified Almost Inverse Algorithm (Algorithm 10) from
+ *     Hankerson, D., Hernandez, J.L., and Menezes, A.  "Software Implementation
+ *     of Elliptic Curve Cryptography Over Binary Fields".
+ */
+int BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
+	{
+	BIGNUM *b, *c, *u, *v, *tmp;
+	int ret = 0;
+
+	bn_check_top(a);
+	bn_check_top(p);
+
+	BN_CTX_start(ctx);
+	
+	b = BN_CTX_get(ctx);
+	c = BN_CTX_get(ctx);
+	u = BN_CTX_get(ctx);
+	v = BN_CTX_get(ctx);
+	if (v == NULL) goto err;
+
+	if (!BN_one(b)) goto err;
+	if (!BN_GF2m_mod(u, a, p)) goto err;
+	if (!BN_copy(v, p)) goto err;
+
+	if (BN_is_zero(u)) goto err;
+
+	while (1)
+		{
+		while (!BN_is_odd(u))
+			{
+			if (BN_is_zero(u)) goto err;
+			if (!BN_rshift1(u, u)) goto err;
+			if (BN_is_odd(b))
+				{
+				if (!BN_GF2m_add(b, b, p)) goto err;
+				}
+			if (!BN_rshift1(b, b)) goto err;
+			}
+
+		if (BN_abs_is_word(u, 1)) break;
+
+		if (BN_num_bits(u) < BN_num_bits(v))
+			{
+			tmp = u; u = v; v = tmp;
+			tmp = b; b = c; c = tmp;
+			}
+		
+		if (!BN_GF2m_add(u, u, v)) goto err;
+		if (!BN_GF2m_add(b, b, c)) goto err;
+		}
+
+
+	if (!BN_copy(r, b)) goto err;
+	bn_check_top(r);
+	ret = 1;
+
+err:
+  	BN_CTX_end(ctx);
+	return ret;
+	}
+
+/* Invert xx, reduce modulo p, and store the result in r. r could be xx. 
+ *
+ * This function calls down to the BN_GF2m_mod_inv implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_inv function.
+ */
+int BN_GF2m_mod_inv_arr(BIGNUM *r, const BIGNUM *xx, const int p[], BN_CTX *ctx)
+	{
+	BIGNUM *field;
+	int ret = 0;
+
+	bn_check_top(xx);
+	BN_CTX_start(ctx);
+	if ((field = BN_CTX_get(ctx)) == NULL) goto err;
+	if (!BN_GF2m_arr2poly(p, field)) goto err;
+	
+	ret = BN_GF2m_mod_inv(r, xx, field, ctx);
+	bn_check_top(r);
+
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+
+#ifndef OPENSSL_SUN_GF2M_DIV
+/* Divide y by x, reduce modulo p, and store the result in r. r could be x 
+ * or y, x could equal y.
+ */
+int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *y, const BIGNUM *x, const BIGNUM *p, BN_CTX *ctx)
+	{
+	BIGNUM *xinv = NULL;
+	int ret = 0;
+
+	bn_check_top(y);
+	bn_check_top(x);
+	bn_check_top(p);
+
+	BN_CTX_start(ctx);
+	xinv = BN_CTX_get(ctx);
+	if (xinv == NULL) goto err;
+	
+	if (!BN_GF2m_mod_inv(xinv, x, p, ctx)) goto err;
+	if (!BN_GF2m_mod_mul(r, y, xinv, p, ctx)) goto err;
+	bn_check_top(r);
+	ret = 1;
+
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+#else
+/* Divide y by x, reduce modulo p, and store the result in r. r could be x 
+ * or y, x could equal y.
+ * Uses algorithm Modular_Division_GF(2^m) from 
+ *     Chang-Shantz, S.  "From Euclid's GCD to Montgomery Multiplication to 
+ *     the Great Divide".
+ */
+int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *y, const BIGNUM *x, const BIGNUM *p, BN_CTX *ctx)
+	{
+	BIGNUM *a, *b, *u, *v;
+	int ret = 0;
+
+	bn_check_top(y);
+	bn_check_top(x);
+	bn_check_top(p);
+
+	BN_CTX_start(ctx);
+	
+	a = BN_CTX_get(ctx);
+	b = BN_CTX_get(ctx);
+	u = BN_CTX_get(ctx);
+	v = BN_CTX_get(ctx);
+	if (v == NULL) goto err;
+
+	/* reduce x and y mod p */
+	if (!BN_GF2m_mod(u, y, p)) goto err;
+	if (!BN_GF2m_mod(a, x, p)) goto err;
+	if (!BN_copy(b, p)) goto err;
+	
+	while (!BN_is_odd(a))
+		{
+		if (!BN_rshift1(a, a)) goto err;
+		if (BN_is_odd(u)) if (!BN_GF2m_add(u, u, p)) goto err;
+		if (!BN_rshift1(u, u)) goto err;
+		}
+
+	do
+		{
+		if (BN_GF2m_cmp(b, a) > 0)
+			{
+			if (!BN_GF2m_add(b, b, a)) goto err;
+			if (!BN_GF2m_add(v, v, u)) goto err;
+			do
+				{
+				if (!BN_rshift1(b, b)) goto err;
+				if (BN_is_odd(v)) if (!BN_GF2m_add(v, v, p)) goto err;
+				if (!BN_rshift1(v, v)) goto err;
+				} while (!BN_is_odd(b));
+			}
+		else if (BN_abs_is_word(a, 1))
+			break;
+		else
+			{
+			if (!BN_GF2m_add(a, a, b)) goto err;
+			if (!BN_GF2m_add(u, u, v)) goto err;
+			do
+				{
+				if (!BN_rshift1(a, a)) goto err;
+				if (BN_is_odd(u)) if (!BN_GF2m_add(u, u, p)) goto err;
+				if (!BN_rshift1(u, u)) goto err;
+				} while (!BN_is_odd(a));
+			}
+		} while (1);
+
+	if (!BN_copy(r, u)) goto err;
+	bn_check_top(r);
+	ret = 1;
+
+err:
+  	BN_CTX_end(ctx);
+	return ret;
+	}
+#endif
+
+/* Divide yy by xx, reduce modulo p, and store the result in r. r could be xx 
+ * or yy, xx could equal yy.
+ *
+ * This function calls down to the BN_GF2m_mod_div implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_div function.
+ */
+int BN_GF2m_mod_div_arr(BIGNUM *r, const BIGNUM *yy, const BIGNUM *xx, const int p[], BN_CTX *ctx)
+	{
+	BIGNUM *field;
+	int ret = 0;
+
+	bn_check_top(yy);
+	bn_check_top(xx);
+
+	BN_CTX_start(ctx);
+	if ((field = BN_CTX_get(ctx)) == NULL) goto err;
+	if (!BN_GF2m_arr2poly(p, field)) goto err;
+	
+	ret = BN_GF2m_mod_div(r, yy, xx, field, ctx);
+	bn_check_top(r);
+
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+
+/* Compute the bth power of a, reduce modulo p, and store
+ * the result in r.  r could be a.
+ * Uses simple square-and-multiply algorithm A.5.1 from IEEE P1363.
+ */
+int	BN_GF2m_mod_exp_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const int p[], BN_CTX *ctx)
+	{
+	int ret = 0, i, n;
+	BIGNUM *u;
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	if (BN_is_zero(b))
+		return(BN_one(r));
+
+	if (BN_abs_is_word(b, 1))
+		return (BN_copy(r, a) != NULL);
+
+	BN_CTX_start(ctx);
+	if ((u = BN_CTX_get(ctx)) == NULL) goto err;
+	
+	if (!BN_GF2m_mod_arr(u, a, p)) goto err;
+	
+	n = BN_num_bits(b) - 1;
+	for (i = n - 1; i >= 0; i--)
+		{
+		if (!BN_GF2m_mod_sqr_arr(u, u, p, ctx)) goto err;
+		if (BN_is_bit_set(b, i))
+			{
+			if (!BN_GF2m_mod_mul_arr(u, u, a, p, ctx)) goto err;
+			}
+		}
+	if (!BN_copy(r, u)) goto err;
+	bn_check_top(r);
+	ret = 1;
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+/* Compute the bth power of a, reduce modulo p, and store
+ * the result in r.  r could be a.
+ *
+ * This function calls down to the BN_GF2m_mod_exp_arr implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_exp_arr function.
+ */
+int BN_GF2m_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *p, BN_CTX *ctx)
+	{
+	int ret = 0;
+	const int max = BN_num_bits(p) + 1;
+	int *arr=NULL;
+	bn_check_top(a);
+	bn_check_top(b);
+	bn_check_top(p);
+	if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err;
+	ret = BN_GF2m_poly2arr(p, arr, max);
+	if (!ret || ret > max)
+		{
+		BNerr(BN_F_BN_GF2M_MOD_EXP,BN_R_INVALID_LENGTH);
+		goto err;
+		}
+	ret = BN_GF2m_mod_exp_arr(r, a, b, arr, ctx);
+	bn_check_top(r);
+err:
+	if (arr) OPENSSL_free(arr);
+	return ret;
+	}
+
+/* Compute the square root of a, reduce modulo p, and store
+ * the result in r.  r could be a.
+ * Uses exponentiation as in algorithm A.4.1 from IEEE P1363.
+ */
+int	BN_GF2m_mod_sqrt_arr(BIGNUM *r, const BIGNUM *a, const int p[], BN_CTX *ctx)
+	{
+	int ret = 0;
+	BIGNUM *u;
+
+	bn_check_top(a);
+
+	if (!p[0])
+		{
+		/* reduction mod 1 => return 0 */
+		BN_zero(r);
+		return 1;
+		}
+
+	BN_CTX_start(ctx);
+	if ((u = BN_CTX_get(ctx)) == NULL) goto err;
+	
+	if (!BN_set_bit(u, p[0] - 1)) goto err;
+	ret = BN_GF2m_mod_exp_arr(r, a, u, p, ctx);
+	bn_check_top(r);
+
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+/* Compute the square root of a, reduce modulo p, and store
+ * the result in r.  r could be a.
+ *
+ * This function calls down to the BN_GF2m_mod_sqrt_arr implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_sqrt_arr function.
+ */
+int BN_GF2m_mod_sqrt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
+	{
+	int ret = 0;
+	const int max = BN_num_bits(p) + 1;
+	int *arr=NULL;
+	bn_check_top(a);
+	bn_check_top(p);
+	if ((arr = (int *)OPENSSL_malloc(sizeof(int) * max)) == NULL) goto err;
+	ret = BN_GF2m_poly2arr(p, arr, max);
+	if (!ret || ret > max)
+		{
+		BNerr(BN_F_BN_GF2M_MOD_SQRT,BN_R_INVALID_LENGTH);
+		goto err;
+		}
+	ret = BN_GF2m_mod_sqrt_arr(r, a, arr, ctx);
+	bn_check_top(r);
+err:
+	if (arr) OPENSSL_free(arr);
+	return ret;
+	}
+
+/* Find r such that r^2 + r = a mod p.  r could be a. If no r exists returns 0.
+ * Uses algorithms A.4.7 and A.4.6 from IEEE P1363.
+ */
+int BN_GF2m_mod_solve_quad_arr(BIGNUM *r, const BIGNUM *a_, const int p[], BN_CTX *ctx)
+	{
+	int ret = 0, count = 0, j;
+	BIGNUM *a, *z, *rho, *w, *w2, *tmp;
+
+	bn_check_top(a_);
+
+	if (!p[0])
+		{
+		/* reduction mod 1 => return 0 */
+		BN_zero(r);
+		return 1;
+		}
+
+	BN_CTX_start(ctx);
+	a = BN_CTX_get(ctx);
+	z = BN_CTX_get(ctx);
+	w = BN_CTX_get(ctx);
+	if (w == NULL) goto err;
+
+	if (!BN_GF2m_mod_arr(a, a_, p)) goto err;
+	
+	if (BN_is_zero(a))
+		{
+		BN_zero(r);
+		ret = 1;
+		goto err;
+		}
+
+	if (p[0] & 0x1) /* m is odd */
+		{
+		/* compute half-trace of a */
+		if (!BN_copy(z, a)) goto err;
+		for (j = 1; j <= (p[0] - 1) / 2; j++)
+			{
+			if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err;
+			if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err;
+			if (!BN_GF2m_add(z, z, a)) goto err;
+			}
+		
+		}
+	else /* m is even */
+		{
+		rho = BN_CTX_get(ctx);
+		w2 = BN_CTX_get(ctx);
+		tmp = BN_CTX_get(ctx);
+		if (tmp == NULL) goto err;
+		do
+			{
+			if (!BN_rand(rho, p[0], 0, 0)) goto err;
+			if (!BN_GF2m_mod_arr(rho, rho, p)) goto err;
+			BN_zero(z);
+			if (!BN_copy(w, rho)) goto err;
+			for (j = 1; j <= p[0] - 1; j++)
+				{
+				if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err;
+				if (!BN_GF2m_mod_sqr_arr(w2, w, p, ctx)) goto err;
+				if (!BN_GF2m_mod_mul_arr(tmp, w2, a, p, ctx)) goto err;
+				if (!BN_GF2m_add(z, z, tmp)) goto err;
+				if (!BN_GF2m_add(w, w2, rho)) goto err;
+				}
+			count++;
+			} while (BN_is_zero(w) && (count < MAX_ITERATIONS));
+		if (BN_is_zero(w))
+			{
+			BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR,BN_R_TOO_MANY_ITERATIONS);
+			goto err;
+			}
+		}
+	
+	if (!BN_GF2m_mod_sqr_arr(w, z, p, ctx)) goto err;
+	if (!BN_GF2m_add(w, z, w)) goto err;
+	if (BN_GF2m_cmp(w, a))
+		{
+		BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR, BN_R_NO_SOLUTION);
+		goto err;
+		}
+
+	if (!BN_copy(r, z)) goto err;
+	bn_check_top(r);
+
+	ret = 1;
+
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+/* Find r such that r^2 + r = a mod p.  r could be a. If no r exists returns 0.
+ *
+ * This function calls down to the BN_GF2m_mod_solve_quad_arr implementation; this wrapper
+ * function is only provided for convenience; for best performance, use the 
+ * BN_GF2m_mod_solve_quad_arr function.
+ */
+int BN_GF2m_mod_solve_quad(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
+	{
+	int ret = 0;
+	const int max = BN_num_bits(p) + 1;
+	int *arr=NULL;
+	bn_check_top(a);
+	bn_check_top(p);
+	if ((arr = (int *)OPENSSL_malloc(sizeof(int) *
+						max)) == NULL) goto err;
+	ret = BN_GF2m_poly2arr(p, arr, max);
+	if (!ret || ret > max)
+		{
+		BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD,BN_R_INVALID_LENGTH);
+		goto err;
+		}
+	ret = BN_GF2m_mod_solve_quad_arr(r, a, arr, ctx);
+	bn_check_top(r);
+err:
+	if (arr) OPENSSL_free(arr);
+	return ret;
+	}
+
+/* Convert the bit-string representation of a polynomial
+ * ( \sum_{i=0}^n a_i * x^i) into an array of integers corresponding 
+ * to the bits with non-zero coefficient.  Array is terminated with -1.
+ * Up to max elements of the array will be filled.  Return value is total
+ * number of array elements that would be filled if array was large enough.
+ */
+int BN_GF2m_poly2arr(const BIGNUM *a, int p[], int max)
+	{
+	int i, j, k = 0;
+	BN_ULONG mask;
+
+	if (BN_is_zero(a))
+		return 0;
+
+	for (i = a->top - 1; i >= 0; i--)
+		{
+		if (!a->d[i])
+			/* skip word if a->d[i] == 0 */
+			continue;
+		mask = BN_TBIT;
+		for (j = BN_BITS2 - 1; j >= 0; j--)
+			{
+			if (a->d[i] & mask) 
+				{
+				if (k < max) p[k] = BN_BITS2 * i + j;
+				k++;
+				}
+			mask >>= 1;
+			}
+		}
+
+	if (k < max) {
+		p[k] = -1;
+		k++;
+	}
+
+	return k;
+	}
+
+/* Convert the coefficient array representation of a polynomial to a 
+ * bit-string.  The array must be terminated by -1.
+ */
+int BN_GF2m_arr2poly(const int p[], BIGNUM *a)
+	{
+	int i;
+
+	bn_check_top(a);
+	BN_zero(a);
+	for (i = 0; p[i] != -1; i++)
+		{
+		if (BN_set_bit(a, p[i]) == 0)
+			return 0;
+		}
+	bn_check_top(a);
+
+	return 1;
+	}
+
diff --git a/app/openssl/crypto/bn/bn_kron.c b/app/openssl/crypto/bn/bn_kron.c
new file mode 100644
index 00000000..740359b7
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_kron.c
@@ -0,0 +1,184 @@
+/* crypto/bn/bn_kron.c */
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+/* least significant word */
+#define BN_lsw(n) (((n)->top == 0) ? (BN_ULONG) 0 : (n)->d[0])
+
+/* Returns -2 for errors because both -1 and 0 are valid results. */
+int BN_kronecker(const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
+	{
+	int i;
+	int ret = -2; /* avoid 'uninitialized' warning */
+	int err = 0;
+	BIGNUM *A, *B, *tmp;
+	/* In 'tab', only odd-indexed entries are relevant:
+	 * For any odd BIGNUM n,
+	 *     tab[BN_lsw(n) & 7]
+	 * is $(-1)^{(n^2-1)/8}$ (using TeX notation).
+	 * Note that the sign of n does not matter.
+	 */
+	static const int tab[8] = {0, 1, 0, -1, 0, -1, 0, 1};
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	BN_CTX_start(ctx);
+	A = BN_CTX_get(ctx);
+	B = BN_CTX_get(ctx);
+	if (B == NULL) goto end;
+	
+	err = !BN_copy(A, a);
+	if (err) goto end;
+	err = !BN_copy(B, b);
+	if (err) goto end;
+
+	/*
+	 * Kronecker symbol, imlemented according to Henri Cohen,
+	 * "A Course in Computational Algebraic Number Theory"
+	 * (algorithm 1.4.10).
+	 */
+
+	/* Cohen's step 1: */
+
+	if (BN_is_zero(B))
+		{
+		ret = BN_abs_is_word(A, 1);
+		goto end;
+ 		}
+	
+	/* Cohen's step 2: */
+
+	if (!BN_is_odd(A) && !BN_is_odd(B))
+		{
+		ret = 0;
+		goto end;
+		}
+
+	/* now  B  is non-zero */
+	i = 0;
+	while (!BN_is_bit_set(B, i))
+		i++;
+	err = !BN_rshift(B, B, i);
+	if (err) goto end;
+	if (i & 1)
+		{
+		/* i is odd */
+		/* (thus  B  was even, thus  A  must be odd!)  */
+
+		/* set 'ret' to $(-1)^{(A^2-1)/8}$ */
+		ret = tab[BN_lsw(A) & 7];
+		}
+	else
+		{
+		/* i is even */
+		ret = 1;
+		}
+	
+	if (B->neg)
+		{
+		B->neg = 0;
+		if (A->neg)
+			ret = -ret;
+		}
+
+	/* now  B  is positive and odd, so what remains to be done is
+	 * to compute the Jacobi symbol  (A/B)  and multiply it by 'ret' */
+
+	while (1)
+		{
+		/* Cohen's step 3: */
+
+		/*  B  is positive and odd */
+
+		if (BN_is_zero(A))
+			{
+			ret = BN_is_one(B) ? ret : 0;
+			goto end;
+			}
+
+		/* now  A  is non-zero */
+		i = 0;
+		while (!BN_is_bit_set(A, i))
+			i++;
+		err = !BN_rshift(A, A, i);
+		if (err) goto end;
+		if (i & 1)
+			{
+			/* i is odd */
+			/* multiply 'ret' by  $(-1)^{(B^2-1)/8}$ */
+			ret = ret * tab[BN_lsw(B) & 7];
+			}
+	
+		/* Cohen's step 4: */
+		/* multiply 'ret' by  $(-1)^{(A-1)(B-1)/4}$ */
+		if ((A->neg ? ~BN_lsw(A) : BN_lsw(A)) & BN_lsw(B) & 2)
+			ret = -ret;
+		
+		/* (A, B) := (B mod |A|, |A|) */
+		err = !BN_nnmod(B, B, A, ctx);
+		if (err) goto end;
+		tmp = A; A = B; B = tmp;
+		tmp->neg = 0;
+		}
+end:
+	BN_CTX_end(ctx);
+	if (err)
+		return -2;
+	else
+		return ret;
+	}
diff --git a/app/openssl/crypto/bn/bn_lcl.h b/app/openssl/crypto/bn/bn_lcl.h
new file mode 100644
index 00000000..8e5e98e3
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_lcl.h
@@ -0,0 +1,491 @@
+/* crypto/bn/bn_lcl.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#ifndef HEADER_BN_LCL_H
+#define HEADER_BN_LCL_H
+
+#include <openssl/bn.h>
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+
+/*
+ * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions
+ *
+ *
+ * For window size 'w' (w >= 2) and a random 'b' bits exponent,
+ * the number of multiplications is a constant plus on average
+ *
+ *    2^(w-1) + (b-w)/(w+1);
+ *
+ * here  2^(w-1)  is for precomputing the table (we actually need
+ * entries only for windows that have the lowest bit set), and
+ * (b-w)/(w+1)  is an approximation for the expected number of
+ * w-bit windows, not counting the first one.
+ *
+ * Thus we should use
+ *
+ *    w >= 6  if        b > 671
+ *     w = 5  if  671 > b > 239
+ *     w = 4  if  239 > b >  79
+ *     w = 3  if   79 > b >  23
+ *    w <= 2  if   23 > b
+ *
+ * (with draws in between).  Very small exponents are often selected
+ * with low Hamming weight, so we use  w = 1  for b <= 23.
+ */
+#if 1
+#define BN_window_bits_for_exponent_size(b) \
+		((b) > 671 ? 6 : \
+		 (b) > 239 ? 5 : \
+		 (b) >  79 ? 4 : \
+		 (b) >  23 ? 3 : 1)
+#else
+/* Old SSLeay/OpenSSL table.
+ * Maximum window size was 5, so this table differs for b==1024;
+ * but it coincides for other interesting values (b==160, b==512).
+ */
+#define BN_window_bits_for_exponent_size(b) \
+		((b) > 255 ? 5 : \
+		 (b) > 127 ? 4 : \
+		 (b) >  17 ? 3 : 1)
+#endif	 
+
+
+
+/* BN_mod_exp_mont_conttime is based on the assumption that the
+ * L1 data cache line width of the target processor is at least
+ * the following value.
+ */
+#define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH	( 64 )
+#define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK	(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1)
+
+/* Window sizes optimized for fixed window size modular exponentiation
+ * algorithm (BN_mod_exp_mont_consttime).
+ *
+ * To achieve the security goals of BN_mode_exp_mont_consttime, the
+ * maximum size of the window must not exceed
+ * log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH). 
+ *
+ * Window size thresholds are defined for cache line sizes of 32 and 64,
+ * cache line sizes where log_2(32)=5 and log_2(64)=6 respectively. A
+ * window size of 7 should only be used on processors that have a 128
+ * byte or greater cache line size.
+ */
+#if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64
+
+#  define BN_window_bits_for_ctime_exponent_size(b) \
+		((b) > 937 ? 6 : \
+		 (b) > 306 ? 5 : \
+		 (b) >  89 ? 4 : \
+		 (b) >  22 ? 3 : 1)
+#  define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE	(6)
+
+#elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32
+
+#  define BN_window_bits_for_ctime_exponent_size(b) \
+		((b) > 306 ? 5 : \
+		 (b) >  89 ? 4 : \
+		 (b) >  22 ? 3 : 1)
+#  define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE	(5)
+
+#endif
+
+
+/* Pentium pro 16,16,16,32,64 */
+/* Alpha       16,16,16,16.64 */
+#define BN_MULL_SIZE_NORMAL			(16) /* 32 */
+#define BN_MUL_RECURSIVE_SIZE_NORMAL		(16) /* 32 less than */
+#define BN_SQR_RECURSIVE_SIZE_NORMAL		(16) /* 32 */
+#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL	(32) /* 32 */
+#define BN_MONT_CTX_SET_SIZE_WORD		(64) /* 32 */
+
+#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
+/*
+ * BN_UMULT_HIGH section.
+ *
+ * No, I'm not trying to overwhelm you when stating that the
+ * product of N-bit numbers is 2*N bits wide:-) No, I don't expect
+ * you to be impressed when I say that if the compiler doesn't
+ * support 2*N integer type, then you have to replace every N*N
+ * multiplication with 4 (N/2)*(N/2) accompanied by some shifts
+ * and additions which unavoidably results in severe performance
+ * penalties. Of course provided that the hardware is capable of
+ * producing 2*N result... That's when you normally start
+ * considering assembler implementation. However! It should be
+ * pointed out that some CPUs (most notably Alpha, PowerPC and
+ * upcoming IA-64 family:-) provide *separate* instruction
+ * calculating the upper half of the product placing the result
+ * into a general purpose register. Now *if* the compiler supports
+ * inline assembler, then it's not impossible to implement the
+ * "bignum" routines (and have the compiler optimize 'em)
+ * exhibiting "native" performance in C. That's what BN_UMULT_HIGH
+ * macro is about:-)
+ *
+ *					<appro@fy.chalmers.se>
+ */
+# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
+#  if defined(__DECC)
+#   include <c_asm.h>
+#   define BN_UMULT_HIGH(a,b)	(BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))
+#  elif defined(__GNUC__)
+#   define BN_UMULT_HIGH(a,b)	({	\
+	register BN_ULONG ret;		\
+	asm ("umulh	%1,%2,%0"	\
+	     : "=r"(ret)		\
+	     : "r"(a), "r"(b));		\
+	ret;			})
+#  endif	/* compiler */
+# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)
+#  if defined(__GNUC__)
+#   define BN_UMULT_HIGH(a,b)	({	\
+	register BN_ULONG ret;		\
+	asm ("mulhdu	%0,%1,%2"	\
+	     : "=r"(ret)		\
+	     : "r"(a), "r"(b));		\
+	ret;			})
+#  endif	/* compiler */
+# elif (defined(__x86_64) || defined(__x86_64__)) && \
+       (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
+#  if defined(__GNUC__)
+#   define BN_UMULT_HIGH(a,b)	({	\
+	register BN_ULONG ret,discard;	\
+	asm ("mulq	%3"		\
+	     : "=a"(discard),"=d"(ret)	\
+	     : "a"(a), "g"(b)		\
+	     : "cc");			\
+	ret;			})
+#   define BN_UMULT_LOHI(low,high,a,b)	\
+	asm ("mulq	%3"		\
+		: "=a"(low),"=d"(high)	\
+		: "a"(a),"g"(b)		\
+		: "cc");
+#  endif
+# elif (defined(_M_AMD64) || defined(_M_X64)) && defined(SIXTY_FOUR_BIT)
+#  if defined(_MSC_VER) && _MSC_VER>=1400
+    unsigned __int64 __umulh	(unsigned __int64 a,unsigned __int64 b);
+    unsigned __int64 _umul128	(unsigned __int64 a,unsigned __int64 b,
+				 unsigned __int64 *h);
+#   pragma intrinsic(__umulh,_umul128)
+#   define BN_UMULT_HIGH(a,b)		__umulh((a),(b))
+#   define BN_UMULT_LOHI(low,high,a,b)	((low)=_umul128((a),(b),&(high)))
+#  endif
+# endif		/* cpu */
+#endif		/* OPENSSL_NO_ASM */
+
+/*************************************************************
+ * Using the long long type
+ */
+#define Lw(t)    (((BN_ULONG)(t))&BN_MASK2)
+#define Hw(t)    (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
+
+#ifdef BN_DEBUG_RAND
+#define bn_clear_top2max(a) \
+	{ \
+	int      ind = (a)->dmax - (a)->top; \
+	BN_ULONG *ftl = &(a)->d[(a)->top-1]; \
+	for (; ind != 0; ind--) \
+		*(++ftl) = 0x0; \
+	}
+#else
+#define bn_clear_top2max(a)
+#endif
+
+#ifdef BN_LLONG
+#define mul_add(r,a,w,c) { \
+	BN_ULLONG t; \
+	t=(BN_ULLONG)w * (a) + (r) + (c); \
+	(r)= Lw(t); \
+	(c)= Hw(t); \
+	}
+
+#define mul(r,a,w,c) { \
+	BN_ULLONG t; \
+	t=(BN_ULLONG)w * (a) + (c); \
+	(r)= Lw(t); \
+	(c)= Hw(t); \
+	}
+
+#define sqr(r0,r1,a) { \
+	BN_ULLONG t; \
+	t=(BN_ULLONG)(a)*(a); \
+	(r0)=Lw(t); \
+	(r1)=Hw(t); \
+	}
+
+#elif defined(BN_UMULT_LOHI)
+#define mul_add(r,a,w,c) {		\
+	BN_ULONG high,low,ret,tmp=(a);	\
+	ret =  (r);			\
+	BN_UMULT_LOHI(low,high,w,tmp);	\
+	ret += (c);			\
+	(c) =  (ret<(c))?1:0;		\
+	(c) += high;			\
+	ret += low;			\
+	(c) += (ret<low)?1:0;		\
+	(r) =  ret;			\
+	}
+
+#define mul(r,a,w,c)	{		\
+	BN_ULONG high,low,ret,ta=(a);	\
+	BN_UMULT_LOHI(low,high,w,ta);	\
+	ret =  low + (c);		\
+	(c) =  high;			\
+	(c) += (ret<low)?1:0;		\
+	(r) =  ret;			\
+	}
+
+#define sqr(r0,r1,a)	{		\
+	BN_ULONG tmp=(a);		\
+	BN_UMULT_LOHI(r0,r1,tmp,tmp);	\
+	}
+
+#elif defined(BN_UMULT_HIGH)
+#define mul_add(r,a,w,c) {		\
+	BN_ULONG high,low,ret,tmp=(a);	\
+	ret =  (r);			\
+	high=  BN_UMULT_HIGH(w,tmp);	\
+	ret += (c);			\
+	low =  (w) * tmp;		\
+	(c) =  (ret<(c))?1:0;		\
+	(c) += high;			\
+	ret += low;			\
+	(c) += (ret<low)?1:0;		\
+	(r) =  ret;			\
+	}
+
+#define mul(r,a,w,c)	{		\
+	BN_ULONG high,low,ret,ta=(a);	\
+	low =  (w) * ta;		\
+	high=  BN_UMULT_HIGH(w,ta);	\
+	ret =  low + (c);		\
+	(c) =  high;			\
+	(c) += (ret<low)?1:0;		\
+	(r) =  ret;			\
+	}
+
+#define sqr(r0,r1,a)	{		\
+	BN_ULONG tmp=(a);		\
+	(r0) = tmp * tmp;		\
+	(r1) = BN_UMULT_HIGH(tmp,tmp);	\
+	}
+
+#else
+/*************************************************************
+ * No long long type
+ */
+
+#define LBITS(a)	((a)&BN_MASK2l)
+#define HBITS(a)	(((a)>>BN_BITS4)&BN_MASK2l)
+#define	L2HBITS(a)	(((a)<<BN_BITS4)&BN_MASK2)
+
+#define LLBITS(a)	((a)&BN_MASKl)
+#define LHBITS(a)	(((a)>>BN_BITS2)&BN_MASKl)
+#define	LL2HBITS(a)	((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2)
+
+#define mul64(l,h,bl,bh) \
+	{ \
+	BN_ULONG m,m1,lt,ht; \
+ \
+	lt=l; \
+	ht=h; \
+	m =(bh)*(lt); \
+	lt=(bl)*(lt); \
+	m1=(bl)*(ht); \
+	ht =(bh)*(ht); \
+	m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \
+	ht+=HBITS(m); \
+	m1=L2HBITS(m); \
+	lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
+	(l)=lt; \
+	(h)=ht; \
+	}
+
+#define sqr64(lo,ho,in) \
+	{ \
+	BN_ULONG l,h,m; \
+ \
+	h=(in); \
+	l=LBITS(h); \
+	h=HBITS(h); \
+	m =(l)*(h); \
+	l*=l; \
+	h*=h; \
+	h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \
+	m =(m&BN_MASK2l)<<(BN_BITS4+1); \
+	l=(l+m)&BN_MASK2; if (l < m) h++; \
+	(lo)=l; \
+	(ho)=h; \
+	}
+
+#define mul_add(r,a,bl,bh,c) { \
+	BN_ULONG l,h; \
+ \
+	h= (a); \
+	l=LBITS(h); \
+	h=HBITS(h); \
+	mul64(l,h,(bl),(bh)); \
+ \
+	/* non-multiply part */ \
+	l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
+	(c)=(r); \
+	l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
+	(c)=h&BN_MASK2; \
+	(r)=l; \
+	}
+
+#define mul(r,a,bl,bh,c) { \
+	BN_ULONG l,h; \
+ \
+	h= (a); \
+	l=LBITS(h); \
+	h=HBITS(h); \
+	mul64(l,h,(bl),(bh)); \
+ \
+	/* non-multiply part */ \
+	l+=(c); if ((l&BN_MASK2) < (c)) h++; \
+	(c)=h&BN_MASK2; \
+	(r)=l&BN_MASK2; \
+	}
+#endif /* !BN_LLONG */
+
+void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);
+void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
+void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
+void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp);
+void bn_sqr_comba8(BN_ULONG *r,const BN_ULONG *a);
+void bn_sqr_comba4(BN_ULONG *r,const BN_ULONG *a);
+int bn_cmp_words(const BN_ULONG *a,const BN_ULONG *b,int n);
+int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b,
+	int cl, int dl);
+void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
+	int dna,int dnb,BN_ULONG *t);
+void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,
+	int n,int tna,int tnb,BN_ULONG *t);
+void bn_sqr_recursive(BN_ULONG *r,const BN_ULONG *a, int n2, BN_ULONG *t);
+void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);
+void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
+	BN_ULONG *t);
+void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
+	BN_ULONG *t);
+BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
+	int cl, int dl);
+BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
+	int cl, int dl);
+int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num);
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif
diff --git a/app/openssl/crypto/bn/bn_lib.c b/app/openssl/crypto/bn/bn_lib.c
new file mode 100644
index 00000000..5470fbe6
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_lib.c
@@ -0,0 +1,845 @@
+/* crypto/bn/bn_lib.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef BN_DEBUG
+# undef NDEBUG /* avoid conflicting definitions */
+# define NDEBUG
+#endif
+
+#include <assert.h>
+#include <limits.h>
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+const char BN_version[]="Big Number" OPENSSL_VERSION_PTEXT;
+
+/* This stuff appears to be completely unused, so is deprecated */
+#ifndef OPENSSL_NO_DEPRECATED
+/* For a 32 bit machine
+ * 2 -   4 ==  128
+ * 3 -   8 ==  256
+ * 4 -  16 ==  512
+ * 5 -  32 == 1024
+ * 6 -  64 == 2048
+ * 7 - 128 == 4096
+ * 8 - 256 == 8192
+ */
+static int bn_limit_bits=0;
+static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
+static int bn_limit_bits_low=0;
+static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
+static int bn_limit_bits_high=0;
+static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
+static int bn_limit_bits_mont=0;
+static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
+
+void BN_set_params(int mult, int high, int low, int mont)
+	{
+	if (mult >= 0)
+		{
+		if (mult > (int)(sizeof(int)*8)-1)
+			mult=sizeof(int)*8-1;
+		bn_limit_bits=mult;
+		bn_limit_num=1<<mult;
+		}
+	if (high >= 0)
+		{
+		if (high > (int)(sizeof(int)*8)-1)
+			high=sizeof(int)*8-1;
+		bn_limit_bits_high=high;
+		bn_limit_num_high=1<<high;
+		}
+	if (low >= 0)
+		{
+		if (low > (int)(sizeof(int)*8)-1)
+			low=sizeof(int)*8-1;
+		bn_limit_bits_low=low;
+		bn_limit_num_low=1<<low;
+		}
+	if (mont >= 0)
+		{
+		if (mont > (int)(sizeof(int)*8)-1)
+			mont=sizeof(int)*8-1;
+		bn_limit_bits_mont=mont;
+		bn_limit_num_mont=1<<mont;
+		}
+	}
+
+int BN_get_params(int which)
+	{
+	if      (which == 0) return(bn_limit_bits);
+	else if (which == 1) return(bn_limit_bits_high);
+	else if (which == 2) return(bn_limit_bits_low);
+	else if (which == 3) return(bn_limit_bits_mont);
+	else return(0);
+	}
+#endif
+
+const BIGNUM *BN_value_one(void)
+	{
+	static const BN_ULONG data_one=1L;
+	static const BIGNUM const_one={(BN_ULONG *)&data_one,1,1,0,BN_FLG_STATIC_DATA};
+
+	return(&const_one);
+	}
+
+char *BN_options(void)
+	{
+	static int init=0;
+	static char data[16];
+
+	if (!init)
+		{
+		init++;
+#ifdef BN_LLONG
+		BIO_snprintf(data,sizeof data,"bn(%d,%d)",
+			     (int)sizeof(BN_ULLONG)*8,(int)sizeof(BN_ULONG)*8);
+#else
+		BIO_snprintf(data,sizeof data,"bn(%d,%d)",
+			     (int)sizeof(BN_ULONG)*8,(int)sizeof(BN_ULONG)*8);
+#endif
+		}
+	return(data);
+	}
+
+int BN_num_bits_word(BN_ULONG l)
+	{
+	static const unsigned char bits[256]={
+		0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,
+		5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
+		6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
+		6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
+		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+		};
+
+#if defined(SIXTY_FOUR_BIT_LONG)
+	if (l & 0xffffffff00000000L)
+		{
+		if (l & 0xffff000000000000L)
+			{
+			if (l & 0xff00000000000000L)
+				{
+				return(bits[(int)(l>>56)]+56);
+				}
+			else	return(bits[(int)(l>>48)]+48);
+			}
+		else
+			{
+			if (l & 0x0000ff0000000000L)
+				{
+				return(bits[(int)(l>>40)]+40);
+				}
+			else	return(bits[(int)(l>>32)]+32);
+			}
+		}
+	else
+#else
+#ifdef SIXTY_FOUR_BIT
+	if (l & 0xffffffff00000000LL)
+		{
+		if (l & 0xffff000000000000LL)
+			{
+			if (l & 0xff00000000000000LL)
+				{
+				return(bits[(int)(l>>56)]+56);
+				}
+			else	return(bits[(int)(l>>48)]+48);
+			}
+		else
+			{
+			if (l & 0x0000ff0000000000LL)
+				{
+				return(bits[(int)(l>>40)]+40);
+				}
+			else	return(bits[(int)(l>>32)]+32);
+			}
+		}
+	else
+#endif
+#endif
+		{
+#if defined(THIRTY_TWO_BIT) || defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
+		if (l & 0xffff0000L)
+			{
+			if (l & 0xff000000L)
+				return(bits[(int)(l>>24L)]+24);
+			else	return(bits[(int)(l>>16L)]+16);
+			}
+		else
+#endif
+			{
+#if defined(THIRTY_TWO_BIT) || defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
+			if (l & 0xff00L)
+				return(bits[(int)(l>>8)]+8);
+			else	
+#endif
+				return(bits[(int)(l   )]  );
+			}
+		}
+	}
+
+int BN_num_bits(const BIGNUM *a)
+	{
+	int i = a->top - 1;
+	bn_check_top(a);
+
+	if (BN_is_zero(a)) return 0;
+	return ((i*BN_BITS2) + BN_num_bits_word(a->d[i]));
+	}
+
+void BN_clear_free(BIGNUM *a)
+	{
+	int i;
+
+	if (a == NULL) return;
+	bn_check_top(a);
+	if (a->d != NULL)
+		{
+		OPENSSL_cleanse(a->d,a->dmax*sizeof(a->d[0]));
+		if (!(BN_get_flags(a,BN_FLG_STATIC_DATA)))
+			OPENSSL_free(a->d);
+		}
+	i=BN_get_flags(a,BN_FLG_MALLOCED);
+	OPENSSL_cleanse(a,sizeof(BIGNUM));
+	if (i)
+		OPENSSL_free(a);
+	}
+
+void BN_free(BIGNUM *a)
+	{
+	if (a == NULL) return;
+	bn_check_top(a);
+	if ((a->d != NULL) && !(BN_get_flags(a,BN_FLG_STATIC_DATA)))
+		OPENSSL_free(a->d);
+	if (a->flags & BN_FLG_MALLOCED)
+		OPENSSL_free(a);
+	else
+		{
+#ifndef OPENSSL_NO_DEPRECATED
+		a->flags|=BN_FLG_FREE;
+#endif
+		a->d = NULL;
+		}
+	}
+
+void BN_init(BIGNUM *a)
+	{
+	memset(a,0,sizeof(BIGNUM));
+	bn_check_top(a);
+	}
+
+BIGNUM *BN_new(void)
+	{
+	BIGNUM *ret;
+
+	if ((ret=(BIGNUM *)OPENSSL_malloc(sizeof(BIGNUM))) == NULL)
+		{
+		BNerr(BN_F_BN_NEW,ERR_R_MALLOC_FAILURE);
+		return(NULL);
+		}
+	ret->flags=BN_FLG_MALLOCED;
+	ret->top=0;
+	ret->neg=0;
+	ret->dmax=0;
+	ret->d=NULL;
+	bn_check_top(ret);
+	return(ret);
+	}
+
+/* This is used both by bn_expand2() and bn_dup_expand() */
+/* The caller MUST check that words > b->dmax before calling this */
+static BN_ULONG *bn_expand_internal(const BIGNUM *b, int words)
+	{
+	BN_ULONG *A,*a = NULL;
+	const BN_ULONG *B;
+	int i;
+
+	bn_check_top(b);
+
+	if (words > (INT_MAX/(4*BN_BITS2)))
+		{
+		BNerr(BN_F_BN_EXPAND_INTERNAL,BN_R_BIGNUM_TOO_LONG);
+		return NULL;
+		}
+	if (BN_get_flags(b,BN_FLG_STATIC_DATA))
+		{
+		BNerr(BN_F_BN_EXPAND_INTERNAL,BN_R_EXPAND_ON_STATIC_BIGNUM_DATA);
+		return(NULL);
+		}
+	a=A=(BN_ULONG *)OPENSSL_malloc(sizeof(BN_ULONG)*words);
+	if (A == NULL)
+		{
+		BNerr(BN_F_BN_EXPAND_INTERNAL,ERR_R_MALLOC_FAILURE);
+		return(NULL);
+		}
+#if 1
+	B=b->d;
+	/* Check if the previous number needs to be copied */
+	if (B != NULL)
+		{
+		for (i=b->top>>2; i>0; i--,A+=4,B+=4)
+			{
+			/*
+			 * The fact that the loop is unrolled
+			 * 4-wise is a tribute to Intel. It's
+			 * the one that doesn't have enough
+			 * registers to accomodate more data.
+			 * I'd unroll it 8-wise otherwise:-)
+			 *
+			 *		<appro@fy.chalmers.se>
+			 */
+			BN_ULONG a0,a1,a2,a3;
+			a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3];
+			A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3;
+			}
+		switch (b->top&3)
+			{
+		case 3:	A[2]=B[2];
+		case 2:	A[1]=B[1];
+		case 1:	A[0]=B[0];
+		case 0: /* workaround for ultrix cc: without 'case 0', the optimizer does
+		         * the switch table by doing a=top&3; a--; goto jump_table[a];
+		         * which fails for top== 0 */
+			;
+			}
+		}
+
+#else
+	memset(A,0,sizeof(BN_ULONG)*words);
+	memcpy(A,b->d,sizeof(b->d[0])*b->top);
+#endif
+		
+	return(a);
+	}
+
+/* This is an internal function that can be used instead of bn_expand2()
+ * when there is a need to copy BIGNUMs instead of only expanding the
+ * data part, while still expanding them.
+ * Especially useful when needing to expand BIGNUMs that are declared
+ * 'const' and should therefore not be changed.
+ * The reason to use this instead of a BN_dup() followed by a bn_expand2()
+ * is memory allocation overhead.  A BN_dup() followed by a bn_expand2()
+ * will allocate new memory for the BIGNUM data twice, and free it once,
+ * while bn_dup_expand() makes sure allocation is made only once.
+ */
+
+#ifndef OPENSSL_NO_DEPRECATED
+BIGNUM *bn_dup_expand(const BIGNUM *b, int words)
+	{
+	BIGNUM *r = NULL;
+
+	bn_check_top(b);
+
+	/* This function does not work if
+	 *      words <= b->dmax && top < words
+	 * because BN_dup() does not preserve 'dmax'!
+	 * (But bn_dup_expand() is not used anywhere yet.)
+	 */
+
+	if (words > b->dmax)
+		{
+		BN_ULONG *a = bn_expand_internal(b, words);
+
+		if (a)
+			{
+			r = BN_new();
+			if (r)
+				{
+				r->top = b->top;
+				r->dmax = words;
+				r->neg = b->neg;
+				r->d = a;
+				}
+			else
+				{
+				/* r == NULL, BN_new failure */
+				OPENSSL_free(a);
+				}
+			}
+		/* If a == NULL, there was an error in allocation in
+		   bn_expand_internal(), and NULL should be returned */
+		}
+	else
+		{
+		r = BN_dup(b);
+		}
+
+	bn_check_top(r);
+	return r;
+	}
+#endif
+
+/* This is an internal function that should not be used in applications.
+ * It ensures that 'b' has enough room for a 'words' word number
+ * and initialises any unused part of b->d with leading zeros.
+ * It is mostly used by the various BIGNUM routines. If there is an error,
+ * NULL is returned. If not, 'b' is returned. */
+
+BIGNUM *bn_expand2(BIGNUM *b, int words)
+	{
+	bn_check_top(b);
+
+	if (words > b->dmax)
+		{
+		BN_ULONG *a = bn_expand_internal(b, words);
+		if(!a) return NULL;
+		if(b->d) OPENSSL_free(b->d);
+		b->d=a;
+		b->dmax=words;
+		}
+
+/* None of this should be necessary because of what b->top means! */
+#if 0
+	/* NB: bn_wexpand() calls this only if the BIGNUM really has to grow */
+	if (b->top < b->dmax)
+		{
+		int i;
+		BN_ULONG *A = &(b->d[b->top]);
+		for (i=(b->dmax - b->top)>>3; i>0; i--,A+=8)
+			{
+			A[0]=0; A[1]=0; A[2]=0; A[3]=0;
+			A[4]=0; A[5]=0; A[6]=0; A[7]=0;
+			}
+		for (i=(b->dmax - b->top)&7; i>0; i--,A++)
+			A[0]=0;
+		assert(A == &(b->d[b->dmax]));
+		}
+#endif
+	bn_check_top(b);
+	return b;
+	}
+
+BIGNUM *BN_dup(const BIGNUM *a)
+	{
+	BIGNUM *t;
+
+	if (a == NULL) return NULL;
+	bn_check_top(a);
+
+	t = BN_new();
+	if (t == NULL) return NULL;
+	if(!BN_copy(t, a))
+		{
+		BN_free(t);
+		return NULL;
+		}
+	bn_check_top(t);
+	return t;
+	}
+
+BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b)
+	{
+	int i;
+	BN_ULONG *A;
+	const BN_ULONG *B;
+
+	bn_check_top(b);
+
+	if (a == b) return(a);
+	if (bn_wexpand(a,b->top) == NULL) return(NULL);
+
+#if 1
+	A=a->d;
+	B=b->d;
+	for (i=b->top>>2; i>0; i--,A+=4,B+=4)
+		{
+		BN_ULONG a0,a1,a2,a3;
+		a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3];
+		A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3;
+		}
+	switch (b->top&3)
+		{
+		case 3: A[2]=B[2];
+		case 2: A[1]=B[1];
+		case 1: A[0]=B[0];
+		case 0: ; /* ultrix cc workaround, see comments in bn_expand_internal */
+		}
+#else
+	memcpy(a->d,b->d,sizeof(b->d[0])*b->top);
+#endif
+
+	a->top=b->top;
+	a->neg=b->neg;
+	bn_check_top(a);
+	return(a);
+	}
+
+void BN_swap(BIGNUM *a, BIGNUM *b)
+	{
+	int flags_old_a, flags_old_b;
+	BN_ULONG *tmp_d;
+	int tmp_top, tmp_dmax, tmp_neg;
+	
+	bn_check_top(a);
+	bn_check_top(b);
+
+	flags_old_a = a->flags;
+	flags_old_b = b->flags;
+
+	tmp_d = a->d;
+	tmp_top = a->top;
+	tmp_dmax = a->dmax;
+	tmp_neg = a->neg;
+	
+	a->d = b->d;
+	a->top = b->top;
+	a->dmax = b->dmax;
+	a->neg = b->neg;
+	
+	b->d = tmp_d;
+	b->top = tmp_top;
+	b->dmax = tmp_dmax;
+	b->neg = tmp_neg;
+	
+	a->flags = (flags_old_a & BN_FLG_MALLOCED) | (flags_old_b & BN_FLG_STATIC_DATA);
+	b->flags = (flags_old_b & BN_FLG_MALLOCED) | (flags_old_a & BN_FLG_STATIC_DATA);
+	bn_check_top(a);
+	bn_check_top(b);
+	}
+
+void BN_clear(BIGNUM *a)
+	{
+	bn_check_top(a);
+	if (a->d != NULL)
+		memset(a->d,0,a->dmax*sizeof(a->d[0]));
+	a->top=0;
+	a->neg=0;
+	}
+
+BN_ULONG BN_get_word(const BIGNUM *a)
+	{
+	if (a->top > 1)
+		return BN_MASK2;
+	else if (a->top == 1)
+		return a->d[0];
+	/* a->top == 0 */
+	return 0;
+	}
+
+int BN_set_word(BIGNUM *a, BN_ULONG w)
+	{
+	bn_check_top(a);
+	if (bn_expand(a,(int)sizeof(BN_ULONG)*8) == NULL) return(0);
+	a->neg = 0;
+	a->d[0] = w;
+	a->top = (w ? 1 : 0);
+	bn_check_top(a);
+	return(1);
+	}
+
+BIGNUM *BN_bin2bn(const unsigned char *s, int len, BIGNUM *ret)
+	{
+	unsigned int i,m;
+	unsigned int n;
+	BN_ULONG l;
+	BIGNUM  *bn = NULL;
+
+	if (ret == NULL)
+		ret = bn = BN_new();
+	if (ret == NULL) return(NULL);
+	bn_check_top(ret);
+	l=0;
+	n=len;
+	if (n == 0)
+		{
+		ret->top=0;
+		return(ret);
+		}
+	i=((n-1)/BN_BYTES)+1;
+	m=((n-1)%(BN_BYTES));
+	if (bn_wexpand(ret, (int)i) == NULL)
+		{
+		if (bn) BN_free(bn);
+		return NULL;
+		}
+	ret->top=i;
+	ret->neg=0;
+	while (n--)
+		{
+		l=(l<<8L)| *(s++);
+		if (m-- == 0)
+			{
+			ret->d[--i]=l;
+			l=0;
+			m=BN_BYTES-1;
+			}
+		}
+	/* need to call this due to clear byte at top if avoiding
+	 * having the top bit set (-ve number) */
+	bn_correct_top(ret);
+	return(ret);
+	}
+
+/* ignore negative */
+int BN_bn2bin(const BIGNUM *a, unsigned char *to)
+	{
+	int n,i;
+	BN_ULONG l;
+
+	bn_check_top(a);
+	n=i=BN_num_bytes(a);
+	while (i--)
+		{
+		l=a->d[i/BN_BYTES];
+		*(to++)=(unsigned char)(l>>(8*(i%BN_BYTES)))&0xff;
+		}
+	return(n);
+	}
+
+int BN_ucmp(const BIGNUM *a, const BIGNUM *b)
+	{
+	int i;
+	BN_ULONG t1,t2,*ap,*bp;
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	i=a->top-b->top;
+	if (i != 0) return(i);
+	ap=a->d;
+	bp=b->d;
+	for (i=a->top-1; i>=0; i--)
+		{
+		t1= ap[i];
+		t2= bp[i];
+		if (t1 != t2)
+			return((t1 > t2) ? 1 : -1);
+		}
+	return(0);
+	}
+
+int BN_cmp(const BIGNUM *a, const BIGNUM *b)
+	{
+	int i;
+	int gt,lt;
+	BN_ULONG t1,t2;
+
+	if ((a == NULL) || (b == NULL))
+		{
+		if (a != NULL)
+			return(-1);
+		else if (b != NULL)
+			return(1);
+		else
+			return(0);
+		}
+
+	bn_check_top(a);
+	bn_check_top(b);
+
+	if (a->neg != b->neg)
+		{
+		if (a->neg)
+			return(-1);
+		else	return(1);
+		}
+	if (a->neg == 0)
+		{ gt=1; lt= -1; }
+	else	{ gt= -1; lt=1; }
+
+	if (a->top > b->top) return(gt);
+	if (a->top < b->top) return(lt);
+	for (i=a->top-1; i>=0; i--)
+		{
+		t1=a->d[i];
+		t2=b->d[i];
+		if (t1 > t2) return(gt);
+		if (t1 < t2) return(lt);
+		}
+	return(0);
+	}
+
+int BN_set_bit(BIGNUM *a, int n)
+	{
+	int i,j,k;
+
+	if (n < 0)
+		return 0;
+
+	i=n/BN_BITS2;
+	j=n%BN_BITS2;
+	if (a->top <= i)
+		{
+		if (bn_wexpand(a,i+1) == NULL) return(0);
+		for(k=a->top; k<i+1; k++)
+			a->d[k]=0;
+		a->top=i+1;
+		}
+
+	a->d[i]|=(((BN_ULONG)1)<<j);
+	bn_check_top(a);
+	return(1);
+	}
+
+int BN_clear_bit(BIGNUM *a, int n)
+	{
+	int i,j;
+
+	bn_check_top(a);
+	if (n < 0) return 0;
+
+	i=n/BN_BITS2;
+	j=n%BN_BITS2;
+	if (a->top <= i) return(0);
+
+	a->d[i]&=(~(((BN_ULONG)1)<<j));
+	bn_correct_top(a);
+	return(1);
+	}
+
+int BN_is_bit_set(const BIGNUM *a, int n)
+	{
+	int i,j;
+
+	bn_check_top(a);
+	if (n < 0) return 0;
+	i=n/BN_BITS2;
+	j=n%BN_BITS2;
+	if (a->top <= i) return 0;
+	return (int)(((a->d[i])>>j)&((BN_ULONG)1));
+	}
+
+int BN_mask_bits(BIGNUM *a, int n)
+	{
+	int b,w;
+
+	bn_check_top(a);
+	if (n < 0) return 0;
+
+	w=n/BN_BITS2;
+	b=n%BN_BITS2;
+	if (w >= a->top) return 0;
+	if (b == 0)
+		a->top=w;
+	else
+		{
+		a->top=w+1;
+		a->d[w]&= ~(BN_MASK2<<b);
+		}
+	bn_correct_top(a);
+	return(1);
+	}
+
+void BN_set_negative(BIGNUM *a, int b)
+	{
+	if (b && !BN_is_zero(a))
+		a->neg = 1;
+	else
+		a->neg = 0;
+	}
+
+int bn_cmp_words(const BN_ULONG *a, const BN_ULONG *b, int n)
+	{
+	int i;
+	BN_ULONG aa,bb;
+
+	aa=a[n-1];
+	bb=b[n-1];
+	if (aa != bb) return((aa > bb)?1:-1);
+	for (i=n-2; i>=0; i--)
+		{
+		aa=a[i];
+		bb=b[i];
+		if (aa != bb) return((aa > bb)?1:-1);
+		}
+	return(0);
+	}
+
+/* Here follows a specialised variants of bn_cmp_words().  It has the
+   property of performing the operation on arrays of different sizes.
+   The sizes of those arrays is expressed through cl, which is the
+   common length ( basicall, min(len(a),len(b)) ), and dl, which is the
+   delta between the two lengths, calculated as len(a)-len(b).
+   All lengths are the number of BN_ULONGs...  */
+
+int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b,
+	int cl, int dl)
+	{
+	int n,i;
+	n = cl-1;
+
+	if (dl < 0)
+		{
+		for (i=dl; i<0; i++)
+			{
+			if (b[n-i] != 0)
+				return -1; /* a < b */
+			}
+		}
+	if (dl > 0)
+		{
+		for (i=dl; i>0; i--)
+			{
+			if (a[n+i] != 0)
+				return 1; /* a > b */
+			}
+		}
+	return bn_cmp_words(a,b,cl);
+	}
diff --git a/app/openssl/crypto/bn/bn_mod.c b/app/openssl/crypto/bn/bn_mod.c
new file mode 100644
index 00000000..77d6ddb9
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_mod.c
@@ -0,0 +1,301 @@
+/* crypto/bn/bn_mod.c */
+/* Includes code written by Lenka Fibikova <fibikova@exp-math.uni-essen.de>
+ * for the OpenSSL project. */
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+
+#if 0 /* now just a #define */
+int BN_mod(BIGNUM *rem, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx)
+	{
+	return(BN_div(NULL,rem,m,d,ctx));
+	/* note that  rem->neg == m->neg  (unless the remainder is zero) */
+	}
+#endif
+
+
+int BN_nnmod(BIGNUM *r, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx)
+	{
+	/* like BN_mod, but returns non-negative remainder
+	 * (i.e.,  0 <= r < |d|  always holds) */
+
+	if (!(BN_mod(r,m,d,ctx)))
+		return 0;
+	if (!r->neg)
+		return 1;
+	/* now   -|d| < r < 0,  so we have to set  r := r + |d| */
+	return (d->neg ? BN_sub : BN_add)(r, r, d);
+}
+
+
+int BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx)
+	{
+	if (!BN_add(r, a, b)) return 0;
+	return BN_nnmod(r, r, m, ctx);
+	}
+
+
+/* BN_mod_add variant that may be used if both  a  and  b  are non-negative
+ * and less than  m */
+int BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m)
+	{
+	if (!BN_uadd(r, a, b)) return 0;
+	if (BN_ucmp(r, m) >= 0)
+		return BN_usub(r, r, m);
+	return 1;
+	}
+
+
+int BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx)
+	{
+	if (!BN_sub(r, a, b)) return 0;
+	return BN_nnmod(r, r, m, ctx);
+	}
+
+
+/* BN_mod_sub variant that may be used if both  a  and  b  are non-negative
+ * and less than  m */
+int BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m)
+	{
+	if (!BN_sub(r, a, b)) return 0;
+	if (r->neg)
+		return BN_add(r, r, m);
+	return 1;
+	}
+
+
+/* slow but works */
+int BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m,
+	BN_CTX *ctx)
+	{
+	BIGNUM *t;
+	int ret=0;
+
+	bn_check_top(a);
+	bn_check_top(b);
+	bn_check_top(m);
+
+	BN_CTX_start(ctx);
+	if ((t = BN_CTX_get(ctx)) == NULL) goto err;
+	if (a == b)
+		{ if (!BN_sqr(t,a,ctx)) goto err; }
+	else
+		{ if (!BN_mul(t,a,b,ctx)) goto err; }
+	if (!BN_nnmod(r,t,m,ctx)) goto err;
+	bn_check_top(r);
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	return(ret);
+	}
+
+
+int BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx)
+	{
+	if (!BN_sqr(r, a, ctx)) return 0;
+	/* r->neg == 0,  thus we don't need BN_nnmod */
+	return BN_mod(r, r, m, ctx);
+	}
+
+
+int BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx)
+	{
+	if (!BN_lshift1(r, a)) return 0;
+	bn_check_top(r);
+	return BN_nnmod(r, r, m, ctx);
+	}
+
+
+/* BN_mod_lshift1 variant that may be used if  a  is non-negative
+ * and less than  m */
+int BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *m)
+	{
+	if (!BN_lshift1(r, a)) return 0;
+	bn_check_top(r);
+	if (BN_cmp(r, m) >= 0)
+		return BN_sub(r, r, m);
+	return 1;
+	}
+
+
+int BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m, BN_CTX *ctx)
+	{
+	BIGNUM *abs_m = NULL;
+	int ret;
+
+	if (!BN_nnmod(r, a, m, ctx)) return 0;
+
+	if (m->neg)
+		{
+		abs_m = BN_dup(m);
+		if (abs_m == NULL) return 0;
+		abs_m->neg = 0;
+		}
+	
+	ret = BN_mod_lshift_quick(r, r, n, (abs_m ? abs_m : m));
+	bn_check_top(r);
+
+	if (abs_m)
+		BN_free(abs_m);
+	return ret;
+	}
+
+
+/* BN_mod_lshift variant that may be used if  a  is non-negative
+ * and less than  m */
+int BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m)
+	{
+	if (r != a)
+		{
+		if (BN_copy(r, a) == NULL) return 0;
+		}
+
+	while (n > 0)
+		{
+		int max_shift;
+		
+		/* 0 < r < m */
+		max_shift = BN_num_bits(m) - BN_num_bits(r);
+		/* max_shift >= 0 */
+
+		if (max_shift < 0)
+			{
+			BNerr(BN_F_BN_MOD_LSHIFT_QUICK, BN_R_INPUT_NOT_REDUCED);
+			return 0;
+			}
+
+		if (max_shift > n)
+			max_shift = n;
+
+		if (max_shift)
+			{
+			if (!BN_lshift(r, r, max_shift)) return 0;
+			n -= max_shift;
+			}
+		else
+			{
+			if (!BN_lshift1(r, r)) return 0;
+			--n;
+			}
+
+		/* BN_num_bits(r) <= BN_num_bits(m) */
+
+		if (BN_cmp(r, m) >= 0) 
+			{
+			if (!BN_sub(r, r, m)) return 0;
+			}
+		}
+	bn_check_top(r);
+	
+	return 1;
+	}
diff --git a/app/openssl/crypto/bn/bn_mont.c b/app/openssl/crypto/bn/bn_mont.c
new file mode 100644
index 00000000..1a866880
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_mont.c
@@ -0,0 +1,567 @@
+/* crypto/bn/bn_mont.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+/*
+ * Details about Montgomery multiplication algorithms can be found at
+ * http://security.ece.orst.edu/publications.html, e.g.
+ * http://security.ece.orst.edu/koc/papers/j37acmon.pdf and
+ * sections 3.8 and 4.2 in http://security.ece.orst.edu/koc/papers/r01rsasw.pdf
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+#define MONT_WORD /* use the faster word-based algorithm */
+
+#ifdef MONT_WORD
+static int BN_from_montgomery_word(BIGNUM *ret, BIGNUM *r, BN_MONT_CTX *mont);
+#endif
+
+int BN_mod_mul_montgomery(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
+			  BN_MONT_CTX *mont, BN_CTX *ctx)
+	{
+	BIGNUM *tmp;
+	int ret=0;
+#if defined(OPENSSL_BN_ASM_MONT) && defined(MONT_WORD)
+	int num = mont->N.top;
+
+	if (num>1 && a->top==num && b->top==num)
+		{
+		if (bn_wexpand(r,num) == NULL) return(0);
+		if (bn_mul_mont(r->d,a->d,b->d,mont->N.d,mont->n0,num))
+			{
+			r->neg = a->neg^b->neg;
+			r->top = num;
+			bn_correct_top(r);
+			return(1);
+			}
+		}
+#endif
+
+	BN_CTX_start(ctx);
+	tmp = BN_CTX_get(ctx);
+	if (tmp == NULL) goto err;
+
+	bn_check_top(tmp);
+	if (a == b)
+		{
+		if (!BN_sqr(tmp,a,ctx)) goto err;
+		}
+	else
+		{
+		if (!BN_mul(tmp,a,b,ctx)) goto err;
+		}
+	/* reduce from aRR to aR */
+#ifdef MONT_WORD
+	if (!BN_from_montgomery_word(r,tmp,mont)) goto err;
+#else
+	if (!BN_from_montgomery(r,tmp,mont,ctx)) goto err;
+#endif
+	bn_check_top(r);
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	return(ret);
+	}
+
+#ifdef MONT_WORD
+static int BN_from_montgomery_word(BIGNUM *ret, BIGNUM *r, BN_MONT_CTX *mont)
+	{
+	BIGNUM *n;
+	BN_ULONG *ap,*np,*rp,n0,v,*nrp;
+	int al,nl,max,i,x,ri;
+
+	n= &(mont->N);
+	/* mont->ri is the size of mont->N in bits (rounded up
+	   to the word size) */
+	al=ri=mont->ri/BN_BITS2;
+
+	nl=n->top;
+	if ((al == 0) || (nl == 0)) { ret->top=0; return(1); }
+
+	max=(nl+al+1); /* allow for overflow (no?) XXX */
+	if (bn_wexpand(r,max) == NULL) return(0);
+
+	r->neg^=n->neg;
+	np=n->d;
+	rp=r->d;
+	nrp= &(r->d[nl]);
+
+	/* clear the top words of T */
+#if 1
+	for (i=r->top; i<max; i++) /* memset? XXX */
+		r->d[i]=0;
+#else
+	memset(&(r->d[r->top]),0,(max-r->top)*sizeof(BN_ULONG)); 
+#endif
+
+	r->top=max;
+	n0=mont->n0[0];
+
+#ifdef BN_COUNT
+	fprintf(stderr,"word BN_from_montgomery_word %d * %d\n",nl,nl);
+#endif
+	for (i=0; i<nl; i++)
+		{
+#ifdef __TANDEM
+                {
+                   long long t1;
+                   long long t2;
+                   long long t3;
+                   t1 = rp[0] * (n0 & 0177777);
+                   t2 = 037777600000l;
+                   t2 = n0 & t2;
+                   t3 = rp[0] & 0177777;
+                   t2 = (t3 * t2) & BN_MASK2;
+                   t1 = t1 + t2;
+                   v=bn_mul_add_words(rp,np,nl,(BN_ULONG) t1);
+                }
+#else
+		v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2);
+#endif
+		nrp++;
+		rp++;
+		if (((nrp[-1]+=v)&BN_MASK2) >= v)
+			continue;
+		else
+			{
+			if (((++nrp[0])&BN_MASK2) != 0) continue;
+			if (((++nrp[1])&BN_MASK2) != 0) continue;
+			for (x=2; (((++nrp[x])&BN_MASK2) == 0); x++) ;
+			}
+		}
+	bn_correct_top(r);
+
+	/* mont->ri will be a multiple of the word size and below code
+	 * is kind of BN_rshift(ret,r,mont->ri) equivalent */
+	if (r->top <= ri)
+		{
+		ret->top=0;
+		return(1);
+		}
+	al=r->top-ri;
+
+#define BRANCH_FREE 1
+#if BRANCH_FREE
+	if (bn_wexpand(ret,ri) == NULL) return(0);
+	x=0-(((al-ri)>>(sizeof(al)*8-1))&1);
+	ret->top=x=(ri&~x)|(al&x);	/* min(ri,al) */
+	ret->neg=r->neg;
+
+	rp=ret->d;
+	ap=&(r->d[ri]);
+
+	{
+	size_t m1,m2;
+
+	v=bn_sub_words(rp,ap,np,ri);
+	/* this ----------------^^ works even in al<ri case
+	 * thanks to zealous zeroing of top of the vector in the
+	 * beginning. */
+
+	/* if (al==ri && !v) || al>ri) nrp=rp; else nrp=ap; */
+	/* in other words if subtraction result is real, then
+	 * trick unconditional memcpy below to perform in-place
+	 * "refresh" instead of actual copy. */
+	m1=0-(size_t)(((al-ri)>>(sizeof(al)*8-1))&1);	/* al<ri */
+	m2=0-(size_t)(((ri-al)>>(sizeof(al)*8-1))&1);	/* al>ri */
+	m1|=m2;			/* (al!=ri) */
+	m1|=(0-(size_t)v);	/* (al!=ri || v) */
+	m1&=~m2;		/* (al!=ri || v) && !al>ri */
+	nrp=(BN_ULONG *)(((PTR_SIZE_INT)rp&~m1)|((PTR_SIZE_INT)ap&m1));
+	}
+
+	/* 'i<ri' is chosen to eliminate dependency on input data, even
+	 * though it results in redundant copy in al<ri case. */
+	for (i=0,ri-=4; i<ri; i+=4)
+		{
+		BN_ULONG t1,t2,t3,t4;
+		
+		t1=nrp[i+0];
+		t2=nrp[i+1];
+		t3=nrp[i+2];	ap[i+0]=0;
+		t4=nrp[i+3];	ap[i+1]=0;
+		rp[i+0]=t1;	ap[i+2]=0;
+		rp[i+1]=t2;	ap[i+3]=0;
+		rp[i+2]=t3;
+		rp[i+3]=t4;
+		}
+	for (ri+=4; i<ri; i++)
+		rp[i]=nrp[i], ap[i]=0;
+	bn_correct_top(r);
+	bn_correct_top(ret);
+#else
+	if (bn_wexpand(ret,al) == NULL) return(0);
+	ret->top=al;
+	ret->neg=r->neg;
+
+	rp=ret->d;
+	ap=&(r->d[ri]);
+	al-=4;
+	for (i=0; i<al; i+=4)
+		{
+		BN_ULONG t1,t2,t3,t4;
+		
+		t1=ap[i+0];
+		t2=ap[i+1];
+		t3=ap[i+2];
+		t4=ap[i+3];
+		rp[i+0]=t1;
+		rp[i+1]=t2;
+		rp[i+2]=t3;
+		rp[i+3]=t4;
+		}
+	al+=4;
+	for (; i<al; i++)
+		rp[i]=ap[i];
+
+	if (BN_ucmp(ret, &(mont->N)) >= 0)
+		{
+		if (!BN_usub(ret,ret,&(mont->N))) return(0);
+		}
+#endif
+	bn_check_top(ret);
+
+	return(1);
+	}
+#endif	/* MONT_WORD */
+
+int BN_from_montgomery(BIGNUM *ret, const BIGNUM *a, BN_MONT_CTX *mont,
+	     BN_CTX *ctx)
+	{
+	int retn=0;
+#ifdef MONT_WORD
+	BIGNUM *t;
+
+	BN_CTX_start(ctx);
+	if ((t = BN_CTX_get(ctx)) && BN_copy(t,a))
+		retn = BN_from_montgomery_word(ret,t,mont);
+	BN_CTX_end(ctx);
+#else /* !MONT_WORD */
+	BIGNUM *t1,*t2;
+
+	BN_CTX_start(ctx);
+	t1 = BN_CTX_get(ctx);
+	t2 = BN_CTX_get(ctx);
+	if (t1 == NULL || t2 == NULL) goto err;
+	
+	if (!BN_copy(t1,a)) goto err;
+	BN_mask_bits(t1,mont->ri);
+
+	if (!BN_mul(t2,t1,&mont->Ni,ctx)) goto err;
+	BN_mask_bits(t2,mont->ri);
+
+	if (!BN_mul(t1,t2,&mont->N,ctx)) goto err;
+	if (!BN_add(t2,a,t1)) goto err;
+	if (!BN_rshift(ret,t2,mont->ri)) goto err;
+
+	if (BN_ucmp(ret, &(mont->N)) >= 0)
+		{
+		if (!BN_usub(ret,ret,&(mont->N))) goto err;
+		}
+	retn=1;
+	bn_check_top(ret);
+ err:
+	BN_CTX_end(ctx);
+#endif /* MONT_WORD */
+	return(retn);
+	}
+
+BN_MONT_CTX *BN_MONT_CTX_new(void)
+	{
+	BN_MONT_CTX *ret;
+
+	if ((ret=(BN_MONT_CTX *)OPENSSL_malloc(sizeof(BN_MONT_CTX))) == NULL)
+		return(NULL);
+
+	BN_MONT_CTX_init(ret);
+	ret->flags=BN_FLG_MALLOCED;
+	return(ret);
+	}
+
+void BN_MONT_CTX_init(BN_MONT_CTX *ctx)
+	{
+	ctx->ri=0;
+	BN_init(&(ctx->RR));
+	BN_init(&(ctx->N));
+	BN_init(&(ctx->Ni));
+	ctx->n0[0] = ctx->n0[1] = 0;
+	ctx->flags=0;
+	}
+
+void BN_MONT_CTX_free(BN_MONT_CTX *mont)
+	{
+	if(mont == NULL)
+	    return;
+
+	BN_free(&(mont->RR));
+	BN_free(&(mont->N));
+	BN_free(&(mont->Ni));
+	if (mont->flags & BN_FLG_MALLOCED)
+		OPENSSL_free(mont);
+	}
+
+int BN_MONT_CTX_set(BN_MONT_CTX *mont, const BIGNUM *mod, BN_CTX *ctx)
+	{
+	int ret = 0;
+	BIGNUM *Ri,*R;
+
+	BN_CTX_start(ctx);
+	if((Ri = BN_CTX_get(ctx)) == NULL) goto err;
+	R= &(mont->RR);					/* grab RR as a temp */
+	if (!BN_copy(&(mont->N),mod)) goto err;		/* Set N */
+	mont->N.neg = 0;
+
+#ifdef MONT_WORD
+		{
+		BIGNUM tmod;
+		BN_ULONG buf[2];
+
+		BN_init(&tmod);
+		tmod.d=buf;
+		tmod.dmax=2;
+		tmod.neg=0;
+
+		mont->ri=(BN_num_bits(mod)+(BN_BITS2-1))/BN_BITS2*BN_BITS2;
+
+#if defined(OPENSSL_BN_ASM_MONT) && (BN_BITS2<=32)
+		/* Only certain BN_BITS2<=32 platforms actually make use of
+		 * n0[1], and we could use the #else case (with a shorter R
+		 * value) for the others.  However, currently only the assembler
+		 * files do know which is which. */
+
+		BN_zero(R);
+		if (!(BN_set_bit(R,2*BN_BITS2))) goto err;
+
+								tmod.top=0;
+		if ((buf[0] = mod->d[0]))			tmod.top=1;
+		if ((buf[1] = mod->top>1 ? mod->d[1] : 0))	tmod.top=2;
+
+		if ((BN_mod_inverse(Ri,R,&tmod,ctx)) == NULL)
+			goto err;
+		if (!BN_lshift(Ri,Ri,2*BN_BITS2)) goto err; /* R*Ri */
+		if (!BN_is_zero(Ri))
+			{
+			if (!BN_sub_word(Ri,1)) goto err;
+			}
+		else /* if N mod word size == 1 */
+			{
+			if (bn_expand(Ri,(int)sizeof(BN_ULONG)*2) == NULL)
+				goto err;
+			/* Ri-- (mod double word size) */
+			Ri->neg=0;
+			Ri->d[0]=BN_MASK2;
+			Ri->d[1]=BN_MASK2;
+			Ri->top=2;
+			}
+		if (!BN_div(Ri,NULL,Ri,&tmod,ctx)) goto err;
+		/* Ni = (R*Ri-1)/N,
+		 * keep only couple of least significant words: */
+		mont->n0[0] = (Ri->top > 0) ? Ri->d[0] : 0;
+		mont->n0[1] = (Ri->top > 1) ? Ri->d[1] : 0;
+#else
+		BN_zero(R);
+		if (!(BN_set_bit(R,BN_BITS2))) goto err;	/* R */
+
+		buf[0]=mod->d[0]; /* tmod = N mod word size */
+		buf[1]=0;
+		tmod.top = buf[0] != 0 ? 1 : 0;
+							/* Ri = R^-1 mod N*/
+		if ((BN_mod_inverse(Ri,R,&tmod,ctx)) == NULL)
+			goto err;
+		if (!BN_lshift(Ri,Ri,BN_BITS2)) goto err; /* R*Ri */
+		if (!BN_is_zero(Ri))
+			{
+			if (!BN_sub_word(Ri,1)) goto err;
+			}
+		else /* if N mod word size == 1 */
+			{
+			if (!BN_set_word(Ri,BN_MASK2)) goto err;  /* Ri-- (mod word size) */
+			}
+		if (!BN_div(Ri,NULL,Ri,&tmod,ctx)) goto err;
+		/* Ni = (R*Ri-1)/N,
+		 * keep only least significant word: */
+		mont->n0[0] = (Ri->top > 0) ? Ri->d[0] : 0;
+		mont->n0[1] = 0;
+#endif
+		}
+#else /* !MONT_WORD */
+		{ /* bignum version */
+		mont->ri=BN_num_bits(&mont->N);
+		BN_zero(R);
+		if (!BN_set_bit(R,mont->ri)) goto err;  /* R = 2^ri */
+		                                        /* Ri = R^-1 mod N*/
+		if ((BN_mod_inverse(Ri,R,&mont->N,ctx)) == NULL)
+			goto err;
+		if (!BN_lshift(Ri,Ri,mont->ri)) goto err; /* R*Ri */
+		if (!BN_sub_word(Ri,1)) goto err;
+							/* Ni = (R*Ri-1) / N */
+		if (!BN_div(&(mont->Ni),NULL,Ri,&mont->N,ctx)) goto err;
+		}
+#endif
+
+	/* setup RR for conversions */
+	BN_zero(&(mont->RR));
+	if (!BN_set_bit(&(mont->RR),mont->ri*2)) goto err;
+	if (!BN_mod(&(mont->RR),&(mont->RR),&(mont->N),ctx)) goto err;
+
+	ret = 1;
+err:
+	BN_CTX_end(ctx);
+	return ret;
+	}
+
+BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to, BN_MONT_CTX *from)
+	{
+	if (to == from) return(to);
+
+	if (!BN_copy(&(to->RR),&(from->RR))) return NULL;
+	if (!BN_copy(&(to->N),&(from->N))) return NULL;
+	if (!BN_copy(&(to->Ni),&(from->Ni))) return NULL;
+	to->ri=from->ri;
+	to->n0[0]=from->n0[0];
+	to->n0[1]=from->n0[1];
+	return(to);
+	}
+
+BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock,
+					const BIGNUM *mod, BN_CTX *ctx)
+	{
+	int got_write_lock = 0;
+	BN_MONT_CTX *ret;
+
+	CRYPTO_r_lock(lock);
+	if (!*pmont)
+		{
+		CRYPTO_r_unlock(lock);
+		CRYPTO_w_lock(lock);
+		got_write_lock = 1;
+
+		if (!*pmont)
+			{
+			ret = BN_MONT_CTX_new();
+			if (ret && !BN_MONT_CTX_set(ret, mod, ctx))
+				BN_MONT_CTX_free(ret);
+			else
+				*pmont = ret;
+			}
+		}
+	
+	ret = *pmont;
+	
+	if (got_write_lock)
+		CRYPTO_w_unlock(lock);
+	else
+		CRYPTO_r_unlock(lock);
+		
+	return ret;
+	}
diff --git a/app/openssl/crypto/bn/bn_mpi.c b/app/openssl/crypto/bn/bn_mpi.c
new file mode 100644
index 00000000..a054d21a
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_mpi.c
@@ -0,0 +1,130 @@
+/* crypto/bn/bn_mpi.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+int BN_bn2mpi(const BIGNUM *a, unsigned char *d)
+	{
+	int bits;
+	int num=0;
+	int ext=0;
+	long l;
+
+	bits=BN_num_bits(a);
+	num=(bits+7)/8;
+	if (bits > 0)
+		{
+		ext=((bits & 0x07) == 0);
+		}
+	if (d == NULL)
+		return(num+4+ext);
+
+	l=num+ext;
+	d[0]=(unsigned char)(l>>24)&0xff;
+	d[1]=(unsigned char)(l>>16)&0xff;
+	d[2]=(unsigned char)(l>> 8)&0xff;
+	d[3]=(unsigned char)(l    )&0xff;
+	if (ext) d[4]=0;
+	num=BN_bn2bin(a,&(d[4+ext]));
+	if (a->neg)
+		d[4]|=0x80;
+	return(num+4+ext);
+	}
+
+BIGNUM *BN_mpi2bn(const unsigned char *d, int n, BIGNUM *a)
+	{
+	long len;
+	int neg=0;
+
+	if (n < 4)
+		{
+		BNerr(BN_F_BN_MPI2BN,BN_R_INVALID_LENGTH);
+		return(NULL);
+		}
+	len=((long)d[0]<<24)|((long)d[1]<<16)|((int)d[2]<<8)|(int)d[3];
+	if ((len+4) != n)
+		{
+		BNerr(BN_F_BN_MPI2BN,BN_R_ENCODING_ERROR);
+		return(NULL);
+		}
+
+	if (a == NULL) a=BN_new();
+	if (a == NULL) return(NULL);
+
+	if (len == 0)
+		{
+		a->neg=0;
+		a->top=0;
+		return(a);
+		}
+	d+=4;
+	if ((*d) & 0x80)
+		neg=1;
+	if (BN_bin2bn(d,(int)len,a) == NULL)
+		return(NULL);
+	a->neg=neg;
+	if (neg)
+		{
+		BN_clear_bit(a,BN_num_bits(a)-1);
+		}
+	bn_check_top(a);
+	return(a);
+	}
+
diff --git a/app/openssl/crypto/bn/bn_mul.c b/app/openssl/crypto/bn/bn_mul.c
new file mode 100644
index 00000000..12e5be80
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_mul.c
@@ -0,0 +1,1166 @@
+/* crypto/bn/bn_mul.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef BN_DEBUG
+# undef NDEBUG /* avoid conflicting definitions */
+# define NDEBUG
+#endif
+
+#include <stdio.h>
+#include <assert.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+#if defined(OPENSSL_NO_ASM) || !defined(OPENSSL_BN_ASM_PART_WORDS)
+/* Here follows specialised variants of bn_add_words() and
+   bn_sub_words().  They have the property performing operations on
+   arrays of different sizes.  The sizes of those arrays is expressed through
+   cl, which is the common length ( basicall, min(len(a),len(b)) ), and dl,
+   which is the delta between the two lengths, calculated as len(a)-len(b).
+   All lengths are the number of BN_ULONGs...  For the operations that require
+   a result array as parameter, it must have the length cl+abs(dl).
+   These functions should probably end up in bn_asm.c as soon as there are
+   assembler counterparts for the systems that use assembler files.  */
+
+BN_ULONG bn_sub_part_words(BN_ULONG *r,
+	const BN_ULONG *a, const BN_ULONG *b,
+	int cl, int dl)
+	{
+	BN_ULONG c, t;
+
+	assert(cl >= 0);
+	c = bn_sub_words(r, a, b, cl);
+
+	if (dl == 0)
+		return c;
+
+	r += cl;
+	a += cl;
+	b += cl;
+
+	if (dl < 0)
+		{
+#ifdef BN_COUNT
+		fprintf(stderr, "  bn_sub_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c);
+#endif
+		for (;;)
+			{
+			t = b[0];
+			r[0] = (0-t-c)&BN_MASK2;
+			if (t != 0) c=1;
+			if (++dl >= 0) break;
+
+			t = b[1];
+			r[1] = (0-t-c)&BN_MASK2;
+			if (t != 0) c=1;
+			if (++dl >= 0) break;
+
+			t = b[2];
+			r[2] = (0-t-c)&BN_MASK2;
+			if (t != 0) c=1;
+			if (++dl >= 0) break;
+
+			t = b[3];
+			r[3] = (0-t-c)&BN_MASK2;
+			if (t != 0) c=1;
+			if (++dl >= 0) break;
+
+			b += 4;
+			r += 4;
+			}
+		}
+	else
+		{
+		int save_dl = dl;
+#ifdef BN_COUNT
+		fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, c = %d)\n", cl, dl, c);
+#endif
+		while(c)
+			{
+			t = a[0];
+			r[0] = (t-c)&BN_MASK2;
+			if (t != 0) c=0;
+			if (--dl <= 0) break;
+
+			t = a[1];
+			r[1] = (t-c)&BN_MASK2;
+			if (t != 0) c=0;
+			if (--dl <= 0) break;
+
+			t = a[2];
+			r[2] = (t-c)&BN_MASK2;
+			if (t != 0) c=0;
+			if (--dl <= 0) break;
+
+			t = a[3];
+			r[3] = (t-c)&BN_MASK2;
+			if (t != 0) c=0;
+			if (--dl <= 0) break;
+
+			save_dl = dl;
+			a += 4;
+			r += 4;
+			}
+		if (dl > 0)
+			{
+#ifdef BN_COUNT
+			fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, c == 0)\n", cl, dl);
+#endif
+			if (save_dl > dl)
+				{
+				switch (save_dl - dl)
+					{
+				case 1:
+					r[1] = a[1];
+					if (--dl <= 0) break;
+				case 2:
+					r[2] = a[2];
+					if (--dl <= 0) break;
+				case 3:
+					r[3] = a[3];
+					if (--dl <= 0) break;
+					}
+				a += 4;
+				r += 4;
+				}
+			}
+		if (dl > 0)
+			{
+#ifdef BN_COUNT
+			fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, copy)\n", cl, dl);
+#endif
+			for(;;)
+				{
+				r[0] = a[0];
+				if (--dl <= 0) break;
+				r[1] = a[1];
+				if (--dl <= 0) break;
+				r[2] = a[2];
+				if (--dl <= 0) break;
+				r[3] = a[3];
+				if (--dl <= 0) break;
+
+				a += 4;
+				r += 4;
+				}
+			}
+		}
+	return c;
+	}
+#endif
+
+BN_ULONG bn_add_part_words(BN_ULONG *r,
+	const BN_ULONG *a, const BN_ULONG *b,
+	int cl, int dl)
+	{
+	BN_ULONG c, l, t;
+
+	assert(cl >= 0);
+	c = bn_add_words(r, a, b, cl);
+
+	if (dl == 0)
+		return c;
+
+	r += cl;
+	a += cl;
+	b += cl;
+
+	if (dl < 0)
+		{
+		int save_dl = dl;
+#ifdef BN_COUNT
+		fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c);
+#endif
+		while (c)
+			{
+			l=(c+b[0])&BN_MASK2;
+			c=(l < c);
+			r[0]=l;
+			if (++dl >= 0) break;
+
+			l=(c+b[1])&BN_MASK2;
+			c=(l < c);
+			r[1]=l;
+			if (++dl >= 0) break;
+
+			l=(c+b[2])&BN_MASK2;
+			c=(l < c);
+			r[2]=l;
+			if (++dl >= 0) break;
+
+			l=(c+b[3])&BN_MASK2;
+			c=(l < c);
+			r[3]=l;
+			if (++dl >= 0) break;
+
+			save_dl = dl;
+			b+=4;
+			r+=4;
+			}
+		if (dl < 0)
+			{
+#ifdef BN_COUNT
+			fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, c == 0)\n", cl, dl);
+#endif
+			if (save_dl < dl)
+				{
+				switch (dl - save_dl)
+					{
+				case 1:
+					r[1] = b[1];
+					if (++dl >= 0) break;
+				case 2:
+					r[2] = b[2];
+					if (++dl >= 0) break;
+				case 3:
+					r[3] = b[3];
+					if (++dl >= 0) break;
+					}
+				b += 4;
+				r += 4;
+				}
+			}
+		if (dl < 0)
+			{
+#ifdef BN_COUNT
+			fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, copy)\n", cl, dl);
+#endif
+			for(;;)
+				{
+				r[0] = b[0];
+				if (++dl >= 0) break;
+				r[1] = b[1];
+				if (++dl >= 0) break;
+				r[2] = b[2];
+				if (++dl >= 0) break;
+				r[3] = b[3];
+				if (++dl >= 0) break;
+
+				b += 4;
+				r += 4;
+				}
+			}
+		}
+	else
+		{
+		int save_dl = dl;
+#ifdef BN_COUNT
+		fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0)\n", cl, dl);
+#endif
+		while (c)
+			{
+			t=(a[0]+c)&BN_MASK2;
+			c=(t < c);
+			r[0]=t;
+			if (--dl <= 0) break;
+
+			t=(a[1]+c)&BN_MASK2;
+			c=(t < c);
+			r[1]=t;
+			if (--dl <= 0) break;
+
+			t=(a[2]+c)&BN_MASK2;
+			c=(t < c);
+			r[2]=t;
+			if (--dl <= 0) break;
+
+			t=(a[3]+c)&BN_MASK2;
+			c=(t < c);
+			r[3]=t;
+			if (--dl <= 0) break;
+
+			save_dl = dl;
+			a+=4;
+			r+=4;
+			}
+#ifdef BN_COUNT
+		fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0, c == 0)\n", cl, dl);
+#endif
+		if (dl > 0)
+			{
+			if (save_dl > dl)
+				{
+				switch (save_dl - dl)
+					{
+				case 1:
+					r[1] = a[1];
+					if (--dl <= 0) break;
+				case 2:
+					r[2] = a[2];
+					if (--dl <= 0) break;
+				case 3:
+					r[3] = a[3];
+					if (--dl <= 0) break;
+					}
+				a += 4;
+				r += 4;
+				}
+			}
+		if (dl > 0)
+			{
+#ifdef BN_COUNT
+			fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0, copy)\n", cl, dl);
+#endif
+			for(;;)
+				{
+				r[0] = a[0];
+				if (--dl <= 0) break;
+				r[1] = a[1];
+				if (--dl <= 0) break;
+				r[2] = a[2];
+				if (--dl <= 0) break;
+				r[3] = a[3];
+				if (--dl <= 0) break;
+
+				a += 4;
+				r += 4;
+				}
+			}
+		}
+	return c;
+	}
+
+#ifdef BN_RECURSION
+/* Karatsuba recursive multiplication algorithm
+ * (cf. Knuth, The Art of Computer Programming, Vol. 2) */
+
+/* r is 2*n2 words in size,
+ * a and b are both n2 words in size.
+ * n2 must be a power of 2.
+ * We multiply and return the result.
+ * t must be 2*n2 words in size
+ * We calculate
+ * a[0]*b[0]
+ * a[0]*b[0]+a[1]*b[1]+(a[0]-a[1])*(b[1]-b[0])
+ * a[1]*b[1]
+ */
+/* dnX may not be positive, but n2/2+dnX has to be */
+void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
+	int dna, int dnb, BN_ULONG *t)
+	{
+	int n=n2/2,c1,c2;
+	int tna=n+dna, tnb=n+dnb;
+	unsigned int neg,zero;
+	BN_ULONG ln,lo,*p;
+
+# ifdef BN_COUNT
+	fprintf(stderr," bn_mul_recursive %d%+d * %d%+d\n",n2,dna,n2,dnb);
+# endif
+# ifdef BN_MUL_COMBA
+#  if 0
+	if (n2 == 4)
+		{
+		bn_mul_comba4(r,a,b);
+		return;
+		}
+#  endif
+	/* Only call bn_mul_comba 8 if n2 == 8 and the
+	 * two arrays are complete [steve]
+	 */
+	if (n2 == 8 && dna == 0 && dnb == 0)
+		{
+		bn_mul_comba8(r,a,b);
+		return; 
+		}
+# endif /* BN_MUL_COMBA */
+	/* Else do normal multiply */
+	if (n2 < BN_MUL_RECURSIVE_SIZE_NORMAL)
+		{
+		bn_mul_normal(r,a,n2+dna,b,n2+dnb);
+		if ((dna + dnb) < 0)
+			memset(&r[2*n2 + dna + dnb], 0,
+				sizeof(BN_ULONG) * -(dna + dnb));
+		return;
+		}
+	/* r=(a[0]-a[1])*(b[1]-b[0]) */
+	c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna);
+	c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n);
+	zero=neg=0;
+	switch (c1*3+c2)
+		{
+	case -4:
+		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
+		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		break;
+	case -3:
+		zero=1;
+		break;
+	case -2:
+		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
+		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n); /* + */
+		neg=1;
+		break;
+	case -1:
+	case 0:
+	case 1:
+		zero=1;
+		break;
+	case 2:
+		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna); /* + */
+		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		neg=1;
+		break;
+	case 3:
+		zero=1;
+		break;
+	case 4:
+		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna);
+		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n);
+		break;
+		}
+
+# ifdef BN_MUL_COMBA
+	if (n == 4 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba4 could take
+					       extra args to do this well */
+		{
+		if (!zero)
+			bn_mul_comba4(&(t[n2]),t,&(t[n]));
+		else
+			memset(&(t[n2]),0,8*sizeof(BN_ULONG));
+		
+		bn_mul_comba4(r,a,b);
+		bn_mul_comba4(&(r[n2]),&(a[n]),&(b[n]));
+		}
+	else if (n == 8 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba8 could
+						    take extra args to do this
+						    well */
+		{
+		if (!zero)
+			bn_mul_comba8(&(t[n2]),t,&(t[n]));
+		else
+			memset(&(t[n2]),0,16*sizeof(BN_ULONG));
+		
+		bn_mul_comba8(r,a,b);
+		bn_mul_comba8(&(r[n2]),&(a[n]),&(b[n]));
+		}
+	else
+# endif /* BN_MUL_COMBA */
+		{
+		p= &(t[n2*2]);
+		if (!zero)
+			bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p);
+		else
+			memset(&(t[n2]),0,n2*sizeof(BN_ULONG));
+		bn_mul_recursive(r,a,b,n,0,0,p);
+		bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),n,dna,dnb,p);
+		}
+
+	/* t[32] holds (a[0]-a[1])*(b[1]-b[0]), c1 is the sign
+	 * r[10] holds (a[0]*b[0])
+	 * r[32] holds (b[1]*b[1])
+	 */
+
+	c1=(int)(bn_add_words(t,r,&(r[n2]),n2));
+
+	if (neg) /* if t[32] is negative */
+		{
+		c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2));
+		}
+	else
+		{
+		/* Might have a carry */
+		c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),t,n2));
+		}
+
+	/* t[32] holds (a[0]-a[1])*(b[1]-b[0])+(a[0]*b[0])+(a[1]*b[1])
+	 * r[10] holds (a[0]*b[0])
+	 * r[32] holds (b[1]*b[1])
+	 * c1 holds the carry bits
+	 */
+	c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2));
+	if (c1)
+		{
+		p= &(r[n+n2]);
+		lo= *p;
+		ln=(lo+c1)&BN_MASK2;
+		*p=ln;
+
+		/* The overflow will stop before we over write
+		 * words we should not overwrite */
+		if (ln < (BN_ULONG)c1)
+			{
+			do	{
+				p++;
+				lo= *p;
+				ln=(lo+1)&BN_MASK2;
+				*p=ln;
+				} while (ln == 0);
+			}
+		}
+	}
+
+/* n+tn is the word length
+ * t needs to be n*4 is size, as does r */
+/* tnX may not be negative but less than n */
+void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n,
+	     int tna, int tnb, BN_ULONG *t)
+	{
+	int i,j,n2=n*2;
+	int c1,c2,neg;
+	BN_ULONG ln,lo,*p;
+
+# ifdef BN_COUNT
+	fprintf(stderr," bn_mul_part_recursive (%d%+d) * (%d%+d)\n",
+		n, tna, n, tnb);
+# endif
+	if (n < 8)
+		{
+		bn_mul_normal(r,a,n+tna,b,n+tnb);
+		return;
+		}
+
+	/* r=(a[0]-a[1])*(b[1]-b[0]) */
+	c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna);
+	c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n);
+	neg=0;
+	switch (c1*3+c2)
+		{
+	case -4:
+		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
+		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		break;
+	case -3:
+		/* break; */
+	case -2:
+		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
+		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n); /* + */
+		neg=1;
+		break;
+	case -1:
+	case 0:
+	case 1:
+		/* break; */
+	case 2:
+		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna); /* + */
+		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
+		neg=1;
+		break;
+	case 3:
+		/* break; */
+	case 4:
+		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna);
+		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n);
+		break;
+		}
+		/* The zero case isn't yet implemented here. The speedup
+		   would probably be negligible. */
+# if 0
+	if (n == 4)
+		{
+		bn_mul_comba4(&(t[n2]),t,&(t[n]));
+		bn_mul_comba4(r,a,b);
+		bn_mul_normal(&(r[n2]),&(a[n]),tn,&(b[n]),tn);
+		memset(&(r[n2+tn*2]),0,sizeof(BN_ULONG)*(n2-tn*2));
+		}
+	else
+# endif
+	if (n == 8)
+		{
+		bn_mul_comba8(&(t[n2]),t,&(t[n]));
+		bn_mul_comba8(r,a,b);
+		bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb);
+		memset(&(r[n2+tna+tnb]),0,sizeof(BN_ULONG)*(n2-tna-tnb));
+		}
+	else
+		{
+		p= &(t[n2*2]);
+		bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p);
+		bn_mul_recursive(r,a,b,n,0,0,p);
+		i=n/2;
+		/* If there is only a bottom half to the number,
+		 * just do it */
+		if (tna > tnb)
+			j = tna - i;
+		else
+			j = tnb - i;
+		if (j == 0)
+			{
+			bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),
+				i,tna-i,tnb-i,p);
+			memset(&(r[n2+i*2]),0,sizeof(BN_ULONG)*(n2-i*2));
+			}
+		else if (j > 0) /* eg, n == 16, i == 8 and tn == 11 */
+				{
+				bn_mul_part_recursive(&(r[n2]),&(a[n]),&(b[n]),
+					i,tna-i,tnb-i,p);
+				memset(&(r[n2+tna+tnb]),0,
+					sizeof(BN_ULONG)*(n2-tna-tnb));
+				}
+		else /* (j < 0) eg, n == 16, i == 8 and tn == 5 */
+			{
+			memset(&(r[n2]),0,sizeof(BN_ULONG)*n2);
+			if (tna < BN_MUL_RECURSIVE_SIZE_NORMAL
+				&& tnb < BN_MUL_RECURSIVE_SIZE_NORMAL)
+				{
+				bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb);
+				}
+			else
+				{
+				for (;;)
+					{
+					i/=2;
+					/* these simplified conditions work
+					 * exclusively because difference
+					 * between tna and tnb is 1 or 0 */
+					if (i < tna || i < tnb)
+						{
+						bn_mul_part_recursive(&(r[n2]),
+							&(a[n]),&(b[n]),
+							i,tna-i,tnb-i,p);
+						break;
+						}
+					else if (i == tna || i == tnb)
+						{
+						bn_mul_recursive(&(r[n2]),
+							&(a[n]),&(b[n]),
+							i,tna-i,tnb-i,p);
+						break;
+						}
+					}
+				}
+			}
+		}
+
+	/* t[32] holds (a[0]-a[1])*(b[1]-b[0]), c1 is the sign
+	 * r[10] holds (a[0]*b[0])
+	 * r[32] holds (b[1]*b[1])
+	 */
+
+	c1=(int)(bn_add_words(t,r,&(r[n2]),n2));
+
+	if (neg) /* if t[32] is negative */
+		{
+		c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2));
+		}
+	else
+		{
+		/* Might have a carry */
+		c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),t,n2));
+		}
+
+	/* t[32] holds (a[0]-a[1])*(b[1]-b[0])+(a[0]*b[0])+(a[1]*b[1])
+	 * r[10] holds (a[0]*b[0])
+	 * r[32] holds (b[1]*b[1])
+	 * c1 holds the carry bits
+	 */
+	c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2));
+	if (c1)
+		{
+		p= &(r[n+n2]);
+		lo= *p;
+		ln=(lo+c1)&BN_MASK2;
+		*p=ln;
+
+		/* The overflow will stop before we over write
+		 * words we should not overwrite */
+		if (ln < (BN_ULONG)c1)
+			{
+			do	{
+				p++;
+				lo= *p;
+				ln=(lo+1)&BN_MASK2;
+				*p=ln;
+				} while (ln == 0);
+			}
+		}
+	}
+
+/* a and b must be the same size, which is n2.
+ * r needs to be n2 words and t needs to be n2*2
+ */
+void bn_mul_low_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
+	     BN_ULONG *t)
+	{
+	int n=n2/2;
+
+# ifdef BN_COUNT
+	fprintf(stderr," bn_mul_low_recursive %d * %d\n",n2,n2);
+# endif
+
+	bn_mul_recursive(r,a,b,n,0,0,&(t[0]));
+	if (n >= BN_MUL_LOW_RECURSIVE_SIZE_NORMAL)
+		{
+		bn_mul_low_recursive(&(t[0]),&(a[0]),&(b[n]),n,&(t[n2]));
+		bn_add_words(&(r[n]),&(r[n]),&(t[0]),n);
+		bn_mul_low_recursive(&(t[0]),&(a[n]),&(b[0]),n,&(t[n2]));
+		bn_add_words(&(r[n]),&(r[n]),&(t[0]),n);
+		}
+	else
+		{
+		bn_mul_low_normal(&(t[0]),&(a[0]),&(b[n]),n);
+		bn_mul_low_normal(&(t[n]),&(a[n]),&(b[0]),n);
+		bn_add_words(&(r[n]),&(r[n]),&(t[0]),n);
+		bn_add_words(&(r[n]),&(r[n]),&(t[n]),n);
+		}
+	}
+
+/* a and b must be the same size, which is n2.
+ * r needs to be n2 words and t needs to be n2*2
+ * l is the low words of the output.
+ * t needs to be n2*3
+ */
+void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2,
+	     BN_ULONG *t)
+	{
+	int i,n;
+	int c1,c2;
+	int neg,oneg,zero;
+	BN_ULONG ll,lc,*lp,*mp;
+
+# ifdef BN_COUNT
+	fprintf(stderr," bn_mul_high %d * %d\n",n2,n2);
+# endif
+	n=n2/2;
+
+	/* Calculate (al-ah)*(bh-bl) */
+	neg=zero=0;
+	c1=bn_cmp_words(&(a[0]),&(a[n]),n);
+	c2=bn_cmp_words(&(b[n]),&(b[0]),n);
+	switch (c1*3+c2)
+		{
+	case -4:
+		bn_sub_words(&(r[0]),&(a[n]),&(a[0]),n);
+		bn_sub_words(&(r[n]),&(b[0]),&(b[n]),n);
+		break;
+	case -3:
+		zero=1;
+		break;
+	case -2:
+		bn_sub_words(&(r[0]),&(a[n]),&(a[0]),n);
+		bn_sub_words(&(r[n]),&(b[n]),&(b[0]),n);
+		neg=1;
+		break;
+	case -1:
+	case 0:
+	case 1:
+		zero=1;
+		break;
+	case 2:
+		bn_sub_words(&(r[0]),&(a[0]),&(a[n]),n);
+		bn_sub_words(&(r[n]),&(b[0]),&(b[n]),n);
+		neg=1;
+		break;
+	case 3:
+		zero=1;
+		break;
+	case 4:
+		bn_sub_words(&(r[0]),&(a[0]),&(a[n]),n);
+		bn_sub_words(&(r[n]),&(b[n]),&(b[0]),n);
+		break;
+		}
+		
+	oneg=neg;
+	/* t[10] = (a[0]-a[1])*(b[1]-b[0]) */
+	/* r[10] = (a[1]*b[1]) */
+# ifdef BN_MUL_COMBA
+	if (n == 8)
+		{
+		bn_mul_comba8(&(t[0]),&(r[0]),&(r[n]));
+		bn_mul_comba8(r,&(a[n]),&(b[n]));
+		}
+	else
+# endif
+		{
+		bn_mul_recursive(&(t[0]),&(r[0]),&(r[n]),n,0,0,&(t[n2]));
+		bn_mul_recursive(r,&(a[n]),&(b[n]),n,0,0,&(t[n2]));
+		}
+
+	/* s0 == low(al*bl)
+	 * s1 == low(ah*bh)+low((al-ah)*(bh-bl))+low(al*bl)+high(al*bl)
+	 * We know s0 and s1 so the only unknown is high(al*bl)
+	 * high(al*bl) == s1 - low(ah*bh+s0+(al-ah)*(bh-bl))
+	 * high(al*bl) == s1 - (r[0]+l[0]+t[0])
+	 */
+	if (l != NULL)
+		{
+		lp= &(t[n2+n]);
+		c1=(int)(bn_add_words(lp,&(r[0]),&(l[0]),n));
+		}
+	else
+		{
+		c1=0;
+		lp= &(r[0]);
+		}
+
+	if (neg)
+		neg=(int)(bn_sub_words(&(t[n2]),lp,&(t[0]),n));
+	else
+		{
+		bn_add_words(&(t[n2]),lp,&(t[0]),n);
+		neg=0;
+		}
+
+	if (l != NULL)
+		{
+		bn_sub_words(&(t[n2+n]),&(l[n]),&(t[n2]),n);
+		}
+	else
+		{
+		lp= &(t[n2+n]);
+		mp= &(t[n2]);
+		for (i=0; i<n; i++)
+			lp[i]=((~mp[i])+1)&BN_MASK2;
+		}
+
+	/* s[0] = low(al*bl)
+	 * t[3] = high(al*bl)
+	 * t[10] = (a[0]-a[1])*(b[1]-b[0]) neg is the sign
+	 * r[10] = (a[1]*b[1])
+	 */
+	/* R[10] = al*bl
+	 * R[21] = al*bl + ah*bh + (a[0]-a[1])*(b[1]-b[0])
+	 * R[32] = ah*bh
+	 */
+	/* R[1]=t[3]+l[0]+r[0](+-)t[0] (have carry/borrow)
+	 * R[2]=r[0]+t[3]+r[1](+-)t[1] (have carry/borrow)
+	 * R[3]=r[1]+(carry/borrow)
+	 */
+	if (l != NULL)
+		{
+		lp= &(t[n2]);
+		c1= (int)(bn_add_words(lp,&(t[n2+n]),&(l[0]),n));
+		}
+	else
+		{
+		lp= &(t[n2+n]);
+		c1=0;
+		}
+	c1+=(int)(bn_add_words(&(t[n2]),lp,  &(r[0]),n));
+	if (oneg)
+		c1-=(int)(bn_sub_words(&(t[n2]),&(t[n2]),&(t[0]),n));
+	else
+		c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),&(t[0]),n));
+
+	c2 =(int)(bn_add_words(&(r[0]),&(r[0]),&(t[n2+n]),n));
+	c2+=(int)(bn_add_words(&(r[0]),&(r[0]),&(r[n]),n));
+	if (oneg)
+		c2-=(int)(bn_sub_words(&(r[0]),&(r[0]),&(t[n]),n));
+	else
+		c2+=(int)(bn_add_words(&(r[0]),&(r[0]),&(t[n]),n));
+	
+	if (c1 != 0) /* Add starting at r[0], could be +ve or -ve */
+		{
+		i=0;
+		if (c1 > 0)
+			{
+			lc=c1;
+			do	{
+				ll=(r[i]+lc)&BN_MASK2;
+				r[i++]=ll;
+				lc=(lc > ll);
+				} while (lc);
+			}
+		else
+			{
+			lc= -c1;
+			do	{
+				ll=r[i];
+				r[i++]=(ll-lc)&BN_MASK2;
+				lc=(lc > ll);
+				} while (lc);
+			}
+		}
+	if (c2 != 0) /* Add starting at r[1] */
+		{
+		i=n;
+		if (c2 > 0)
+			{
+			lc=c2;
+			do	{
+				ll=(r[i]+lc)&BN_MASK2;
+				r[i++]=ll;
+				lc=(lc > ll);
+				} while (lc);
+			}
+		else
+			{
+			lc= -c2;
+			do	{
+				ll=r[i];
+				r[i++]=(ll-lc)&BN_MASK2;
+				lc=(lc > ll);
+				} while (lc);
+			}
+		}
+	}
+#endif /* BN_RECURSION */
+
+int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
+	{
+	int ret=0;
+	int top,al,bl;
+	BIGNUM *rr;
+#if defined(BN_MUL_COMBA) || defined(BN_RECURSION)
+	int i;
+#endif
+#ifdef BN_RECURSION
+	BIGNUM *t=NULL;
+	int j=0,k;
+#endif
+
+#ifdef BN_COUNT
+	fprintf(stderr,"BN_mul %d * %d\n",a->top,b->top);
+#endif
+
+	bn_check_top(a);
+	bn_check_top(b);
+	bn_check_top(r);
+
+	al=a->top;
+	bl=b->top;
+
+	if ((al == 0) || (bl == 0))
+		{
+		BN_zero(r);
+		return(1);
+		}
+	top=al+bl;
+
+	BN_CTX_start(ctx);
+	if ((r == a) || (r == b))
+		{
+		if ((rr = BN_CTX_get(ctx)) == NULL) goto err;
+		}
+	else
+		rr = r;
+	rr->neg=a->neg^b->neg;
+
+#if defined(BN_MUL_COMBA) || defined(BN_RECURSION)
+	i = al-bl;
+#endif
+#ifdef BN_MUL_COMBA
+	if (i == 0)
+		{
+# if 0
+		if (al == 4)
+			{
+			if (bn_wexpand(rr,8) == NULL) goto err;
+			rr->top=8;
+			bn_mul_comba4(rr->d,a->d,b->d);
+			goto end;
+			}
+# endif
+		if (al == 8)
+			{
+			if (bn_wexpand(rr,16) == NULL) goto err;
+			rr->top=16;
+			bn_mul_comba8(rr->d,a->d,b->d);
+			goto end;
+			}
+		}
+#endif /* BN_MUL_COMBA */
+#ifdef BN_RECURSION
+	if ((al >= BN_MULL_SIZE_NORMAL) && (bl >= BN_MULL_SIZE_NORMAL))
+		{
+		if (i >= -1 && i <= 1)
+			{
+			/* Find out the power of two lower or equal
+			   to the longest of the two numbers */
+			if (i >= 0)
+				{
+				j = BN_num_bits_word((BN_ULONG)al);
+				}
+			if (i == -1)
+				{
+				j = BN_num_bits_word((BN_ULONG)bl);
+				}
+			j = 1<<(j-1);
+			assert(j <= al || j <= bl);
+			k = j+j;
+			t = BN_CTX_get(ctx);
+			if (t == NULL)
+				goto err;
+			if (al > j || bl > j)
+				{
+				if (bn_wexpand(t,k*4) == NULL) goto err;
+				if (bn_wexpand(rr,k*4) == NULL) goto err;
+				bn_mul_part_recursive(rr->d,a->d,b->d,
+					j,al-j,bl-j,t->d);
+				}
+			else	/* al <= j || bl <= j */
+				{
+				if (bn_wexpand(t,k*2) == NULL) goto err;
+				if (bn_wexpand(rr,k*2) == NULL) goto err;
+				bn_mul_recursive(rr->d,a->d,b->d,
+					j,al-j,bl-j,t->d);
+				}
+			rr->top=top;
+			goto end;
+			}
+#if 0
+		if (i == 1 && !BN_get_flags(b,BN_FLG_STATIC_DATA))
+			{
+			BIGNUM *tmp_bn = (BIGNUM *)b;
+			if (bn_wexpand(tmp_bn,al) == NULL) goto err;
+			tmp_bn->d[bl]=0;
+			bl++;
+			i--;
+			}
+		else if (i == -1 && !BN_get_flags(a,BN_FLG_STATIC_DATA))
+			{
+			BIGNUM *tmp_bn = (BIGNUM *)a;
+			if (bn_wexpand(tmp_bn,bl) == NULL) goto err;
+			tmp_bn->d[al]=0;
+			al++;
+			i++;
+			}
+		if (i == 0)
+			{
+			/* symmetric and > 4 */
+			/* 16 or larger */
+			j=BN_num_bits_word((BN_ULONG)al);
+			j=1<<(j-1);
+			k=j+j;
+			t = BN_CTX_get(ctx);
+			if (al == j) /* exact multiple */
+				{
+				if (bn_wexpand(t,k*2) == NULL) goto err;
+				if (bn_wexpand(rr,k*2) == NULL) goto err;
+				bn_mul_recursive(rr->d,a->d,b->d,al,t->d);
+				}
+			else
+				{
+				if (bn_wexpand(t,k*4) == NULL) goto err;
+				if (bn_wexpand(rr,k*4) == NULL) goto err;
+				bn_mul_part_recursive(rr->d,a->d,b->d,al-j,j,t->d);
+				}
+			rr->top=top;
+			goto end;
+			}
+#endif
+		}
+#endif /* BN_RECURSION */
+	if (bn_wexpand(rr,top) == NULL) goto err;
+	rr->top=top;
+	bn_mul_normal(rr->d,a->d,al,b->d,bl);
+
+#if defined(BN_MUL_COMBA) || defined(BN_RECURSION)
+end:
+#endif
+	bn_correct_top(rr);
+	if (r != rr) BN_copy(r,rr);
+	ret=1;
+err:
+	bn_check_top(r);
+	BN_CTX_end(ctx);
+	return(ret);
+	}
+
+void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb)
+	{
+	BN_ULONG *rr;
+
+#ifdef BN_COUNT
+	fprintf(stderr," bn_mul_normal %d * %d\n",na,nb);
+#endif
+
+	if (na < nb)
+		{
+		int itmp;
+		BN_ULONG *ltmp;
+
+		itmp=na; na=nb; nb=itmp;
+		ltmp=a;   a=b;   b=ltmp;
+
+		}
+	rr= &(r[na]);
+	if (nb <= 0)
+		{
+		(void)bn_mul_words(r,a,na,0);
+		return;
+		}
+	else
+		rr[0]=bn_mul_words(r,a,na,b[0]);
+
+	for (;;)
+		{
+		if (--nb <= 0) return;
+		rr[1]=bn_mul_add_words(&(r[1]),a,na,b[1]);
+		if (--nb <= 0) return;
+		rr[2]=bn_mul_add_words(&(r[2]),a,na,b[2]);
+		if (--nb <= 0) return;
+		rr[3]=bn_mul_add_words(&(r[3]),a,na,b[3]);
+		if (--nb <= 0) return;
+		rr[4]=bn_mul_add_words(&(r[4]),a,na,b[4]);
+		rr+=4;
+		r+=4;
+		b+=4;
+		}
+	}
+
+void bn_mul_low_normal(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
+	{
+#ifdef BN_COUNT
+	fprintf(stderr," bn_mul_low_normal %d * %d\n",n,n);
+#endif
+	bn_mul_words(r,a,n,b[0]);
+
+	for (;;)
+		{
+		if (--n <= 0) return;
+		bn_mul_add_words(&(r[1]),a,n,b[1]);
+		if (--n <= 0) return;
+		bn_mul_add_words(&(r[2]),a,n,b[2]);
+		if (--n <= 0) return;
+		bn_mul_add_words(&(r[3]),a,n,b[3]);
+		if (--n <= 0) return;
+		bn_mul_add_words(&(r[4]),a,n,b[4]);
+		r+=4;
+		b+=4;
+		}
+	}
diff --git a/app/openssl/crypto/bn/bn_nist.c b/app/openssl/crypto/bn/bn_nist.c
new file mode 100644
index 00000000..c6de0326
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_nist.c
@@ -0,0 +1,844 @@
+/* crypto/bn/bn_nist.c */
+/*
+ * Written by Nils Larsch for the OpenSSL project
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include "bn_lcl.h"
+#include "cryptlib.h"
+
+
+#define BN_NIST_192_TOP	(192+BN_BITS2-1)/BN_BITS2
+#define BN_NIST_224_TOP	(224+BN_BITS2-1)/BN_BITS2
+#define BN_NIST_256_TOP	(256+BN_BITS2-1)/BN_BITS2
+#define BN_NIST_384_TOP	(384+BN_BITS2-1)/BN_BITS2
+#define BN_NIST_521_TOP	(521+BN_BITS2-1)/BN_BITS2
+
+/* pre-computed tables are "carry-less" values of modulus*(i+1) */
+#if BN_BITS2 == 64
+static const BN_ULONG _nist_p_192[][BN_NIST_192_TOP] = {
+	{0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFEULL,0xFFFFFFFFFFFFFFFFULL},
+	{0xFFFFFFFFFFFFFFFEULL,0xFFFFFFFFFFFFFFFDULL,0xFFFFFFFFFFFFFFFFULL},
+	{0xFFFFFFFFFFFFFFFDULL,0xFFFFFFFFFFFFFFFCULL,0xFFFFFFFFFFFFFFFFULL}
+	};
+static const BN_ULONG _nist_p_192_sqr[] = {
+	0x0000000000000001ULL,0x0000000000000002ULL,0x0000000000000001ULL,
+	0xFFFFFFFFFFFFFFFEULL,0xFFFFFFFFFFFFFFFDULL,0xFFFFFFFFFFFFFFFFULL
+	};
+static const BN_ULONG _nist_p_224[][BN_NIST_224_TOP] = {
+	{0x0000000000000001ULL,0xFFFFFFFF00000000ULL,
+	 0xFFFFFFFFFFFFFFFFULL,0x00000000FFFFFFFFULL},
+	{0x0000000000000002ULL,0xFFFFFFFE00000000ULL,
+	 0xFFFFFFFFFFFFFFFFULL,0x00000001FFFFFFFFULL} /* this one is "carry-full" */
+	};
+static const BN_ULONG _nist_p_224_sqr[] = {
+	0x0000000000000001ULL,0xFFFFFFFE00000000ULL,
+	0xFFFFFFFFFFFFFFFFULL,0x0000000200000000ULL,
+	0x0000000000000000ULL,0xFFFFFFFFFFFFFFFEULL,
+	0xFFFFFFFFFFFFFFFFULL
+	};
+static const BN_ULONG _nist_p_256[][BN_NIST_256_TOP] = {
+	{0xFFFFFFFFFFFFFFFFULL,0x00000000FFFFFFFFULL,
+	 0x0000000000000000ULL,0xFFFFFFFF00000001ULL},
+	{0xFFFFFFFFFFFFFFFEULL,0x00000001FFFFFFFFULL,
+	 0x0000000000000000ULL,0xFFFFFFFE00000002ULL},
+	{0xFFFFFFFFFFFFFFFDULL,0x00000002FFFFFFFFULL,
+	 0x0000000000000000ULL,0xFFFFFFFD00000003ULL},
+	{0xFFFFFFFFFFFFFFFCULL,0x00000003FFFFFFFFULL,
+	 0x0000000000000000ULL,0xFFFFFFFC00000004ULL},
+	{0xFFFFFFFFFFFFFFFBULL,0x00000004FFFFFFFFULL,
+	 0x0000000000000000ULL,0xFFFFFFFB00000005ULL},
+	};
+static const BN_ULONG _nist_p_256_sqr[] = {
+	0x0000000000000001ULL,0xFFFFFFFE00000000ULL,
+	0xFFFFFFFFFFFFFFFFULL,0x00000001FFFFFFFEULL,
+	0x00000001FFFFFFFEULL,0x00000001FFFFFFFEULL,
+	0xFFFFFFFE00000001ULL,0xFFFFFFFE00000002ULL
+	};
+static const BN_ULONG _nist_p_384[][BN_NIST_384_TOP] = {
+	{0x00000000FFFFFFFFULL,0xFFFFFFFF00000000ULL,0xFFFFFFFFFFFFFFFEULL,
+	 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL},
+	{0x00000001FFFFFFFEULL,0xFFFFFFFE00000000ULL,0xFFFFFFFFFFFFFFFDULL,
+	 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL},
+	{0x00000002FFFFFFFDULL,0xFFFFFFFD00000000ULL,0xFFFFFFFFFFFFFFFCULL,
+	 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL},
+	{0x00000003FFFFFFFCULL,0xFFFFFFFC00000000ULL,0xFFFFFFFFFFFFFFFBULL,
+	 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL},
+	{0x00000004FFFFFFFBULL,0xFFFFFFFB00000000ULL,0xFFFFFFFFFFFFFFFAULL,
+	 0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL},
+	};
+static const BN_ULONG _nist_p_384_sqr[] = {
+	0xFFFFFFFE00000001ULL,0x0000000200000000ULL,0xFFFFFFFE00000000ULL,
+	0x0000000200000000ULL,0x0000000000000001ULL,0x0000000000000000ULL,
+	0x00000001FFFFFFFEULL,0xFFFFFFFE00000000ULL,0xFFFFFFFFFFFFFFFDULL,
+	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL
+	};
+static const BN_ULONG _nist_p_521[] =
+	{0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
+	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
+	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
+	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
+	0x00000000000001FFULL};
+static const BN_ULONG _nist_p_521_sqr[] = {
+	0x0000000000000001ULL,0x0000000000000000ULL,0x0000000000000000ULL,
+	0x0000000000000000ULL,0x0000000000000000ULL,0x0000000000000000ULL,
+	0x0000000000000000ULL,0x0000000000000000ULL,0xFFFFFFFFFFFFFC00ULL,
+	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
+	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
+	0xFFFFFFFFFFFFFFFFULL,0x000000000003FFFFULL
+	};
+#elif BN_BITS2 == 32
+static const BN_ULONG _nist_p_192[][BN_NIST_192_TOP] = {
+	{0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	{0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	{0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFC,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}
+	};
+static const BN_ULONG _nist_p_192_sqr[] = {
+	0x00000001,0x00000000,0x00000002,0x00000000,0x00000001,0x00000000,
+	0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF
+	};
+static const BN_ULONG _nist_p_224[][BN_NIST_224_TOP] = {
+	{0x00000001,0x00000000,0x00000000,0xFFFFFFFF,
+	 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	{0x00000002,0x00000000,0x00000000,0xFFFFFFFE,
+	 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF}
+	};
+static const BN_ULONG _nist_p_224_sqr[] = {
+	0x00000001,0x00000000,0x00000000,0xFFFFFFFE,
+	0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000002,
+	0x00000000,0x00000000,0xFFFFFFFE,0xFFFFFFFF,
+	0xFFFFFFFF,0xFFFFFFFF
+	};
+static const BN_ULONG _nist_p_256[][BN_NIST_256_TOP] = {
+	{0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0x00000000,
+	 0x00000000,0x00000000,0x00000001,0xFFFFFFFF},
+	{0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFF,0x00000001,
+	 0x00000000,0x00000000,0x00000002,0xFFFFFFFE},
+	{0xFFFFFFFD,0xFFFFFFFF,0xFFFFFFFF,0x00000002,
+	 0x00000000,0x00000000,0x00000003,0xFFFFFFFD},
+	{0xFFFFFFFC,0xFFFFFFFF,0xFFFFFFFF,0x00000003,
+	 0x00000000,0x00000000,0x00000004,0xFFFFFFFC},
+	{0xFFFFFFFB,0xFFFFFFFF,0xFFFFFFFF,0x00000004,
+	 0x00000000,0x00000000,0x00000005,0xFFFFFFFB},
+	};
+static const BN_ULONG _nist_p_256_sqr[] = {
+	0x00000001,0x00000000,0x00000000,0xFFFFFFFE,
+	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFE,0x00000001,
+	0xFFFFFFFE,0x00000001,0xFFFFFFFE,0x00000001,
+	0x00000001,0xFFFFFFFE,0x00000002,0xFFFFFFFE
+	};
+static const BN_ULONG _nist_p_384[][BN_NIST_384_TOP] = {
+	{0xFFFFFFFF,0x00000000,0x00000000,0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF,
+	 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	{0xFFFFFFFE,0x00000001,0x00000000,0xFFFFFFFE,0xFFFFFFFD,0xFFFFFFFF,
+	 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	{0xFFFFFFFD,0x00000002,0x00000000,0xFFFFFFFD,0xFFFFFFFC,0xFFFFFFFF,
+	 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	{0xFFFFFFFC,0x00000003,0x00000000,0xFFFFFFFC,0xFFFFFFFB,0xFFFFFFFF,
+	 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	{0xFFFFFFFB,0x00000004,0x00000000,0xFFFFFFFB,0xFFFFFFFA,0xFFFFFFFF,
+	 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF},
+	};
+static const BN_ULONG _nist_p_384_sqr[] = {
+	0x00000001,0xFFFFFFFE,0x00000000,0x00000002,0x00000000,0xFFFFFFFE,
+	0x00000000,0x00000002,0x00000001,0x00000000,0x00000000,0x00000000,
+	0xFFFFFFFE,0x00000001,0x00000000,0xFFFFFFFE,0xFFFFFFFD,0xFFFFFFFF,
+	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF
+	};
+static const BN_ULONG _nist_p_521[] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+	0xFFFFFFFF,0x000001FF};
+static const BN_ULONG _nist_p_521_sqr[] = {
+	0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+	0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+	0x00000000,0x00000000,0x00000000,0x00000000,0xFFFFFC00,0xFFFFFFFF,
+	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
+	0xFFFFFFFF,0xFFFFFFFF,0x0003FFFF
+	};
+#else
+#error "unsupported BN_BITS2"
+#endif
+
+
+static const BIGNUM _bignum_nist_p_192 =
+	{
+	(BN_ULONG *)_nist_p_192[0],
+	BN_NIST_192_TOP,
+	BN_NIST_192_TOP,
+	0,
+	BN_FLG_STATIC_DATA
+	};
+
+static const BIGNUM _bignum_nist_p_224 =
+	{
+	(BN_ULONG *)_nist_p_224[0],
+	BN_NIST_224_TOP,
+	BN_NIST_224_TOP,
+	0,
+	BN_FLG_STATIC_DATA
+	};
+
+static const BIGNUM _bignum_nist_p_256 =
+	{
+	(BN_ULONG *)_nist_p_256[0],
+	BN_NIST_256_TOP,
+	BN_NIST_256_TOP,
+	0,
+	BN_FLG_STATIC_DATA
+	};
+
+static const BIGNUM _bignum_nist_p_384 =
+	{
+	(BN_ULONG *)_nist_p_384[0],
+	BN_NIST_384_TOP,
+	BN_NIST_384_TOP,
+	0,
+	BN_FLG_STATIC_DATA
+	};
+
+static const BIGNUM _bignum_nist_p_521 =
+	{
+	(BN_ULONG *)_nist_p_521,
+	BN_NIST_521_TOP,
+	BN_NIST_521_TOP,
+	0,
+	BN_FLG_STATIC_DATA
+	};
+
+
+const BIGNUM *BN_get0_nist_prime_192(void)
+	{
+	return &_bignum_nist_p_192;
+	}
+
+const BIGNUM *BN_get0_nist_prime_224(void)
+	{
+	return &_bignum_nist_p_224;
+	}
+
+const BIGNUM *BN_get0_nist_prime_256(void)
+	{
+	return &_bignum_nist_p_256;
+	}
+
+const BIGNUM *BN_get0_nist_prime_384(void)
+	{
+	return &_bignum_nist_p_384;
+	}
+
+const BIGNUM *BN_get0_nist_prime_521(void)
+	{
+	return &_bignum_nist_p_521;
+	}
+
+
+static void nist_cp_bn_0(BN_ULONG *buf, BN_ULONG *a, int top, int max)
+	{
+	int i;
+	BN_ULONG *_tmp1 = (buf), *_tmp2 = (a);
+
+#ifdef BN_DEBUG
+	OPENSSL_assert(top <= max);
+#endif
+	for (i = (top); i != 0; i--)
+		*_tmp1++ = *_tmp2++;
+	for (i = (max) - (top); i != 0; i--)
+		*_tmp1++ = (BN_ULONG) 0;
+	}
+
+static void nist_cp_bn(BN_ULONG *buf, BN_ULONG *a, int top)
+	{ 
+	int i;
+	BN_ULONG *_tmp1 = (buf), *_tmp2 = (a);
+	for (i = (top); i != 0; i--)
+		*_tmp1++ = *_tmp2++;
+	}
+
+#if BN_BITS2 == 64
+#define bn_cp_64(to, n, from, m)	(to)[n] = (m>=0)?((from)[m]):0;
+#define bn_64_set_0(to, n)		(to)[n] = (BN_ULONG)0;
+/*
+ * two following macros are implemented under assumption that they
+ * are called in a sequence with *ascending* n, i.e. as they are...
+ */
+#define bn_cp_32_naked(to, n, from, m)	(((n)&1)?(to[(n)/2]|=((m)&1)?(from[(m)/2]&BN_MASK2h):(from[(m)/2]<<32))\
+						:(to[(n)/2] =((m)&1)?(from[(m)/2]>>32):(from[(m)/2]&BN_MASK2l)))
+#define bn_32_set_0(to, n)		(((n)&1)?(to[(n)/2]&=BN_MASK2l):(to[(n)/2]=0));
+#define bn_cp_32(to,n,from,m)		((m)>=0)?bn_cp_32_naked(to,n,from,m):bn_32_set_0(to,n)
+#else
+#define bn_cp_64(to, n, from, m) \
+	{ \
+	bn_cp_32(to, (n)*2, from, (m)*2); \
+	bn_cp_32(to, (n)*2+1, from, (m)*2+1); \
+	}
+#define bn_64_set_0(to, n) \
+	{ \
+	bn_32_set_0(to, (n)*2); \
+	bn_32_set_0(to, (n)*2+1); \
+	}
+#if BN_BITS2 == 32
+#define bn_cp_32(to, n, from, m)	(to)[n] = (m>=0)?((from)[m]):0;
+#define bn_32_set_0(to, n)		(to)[n] = (BN_ULONG)0;
+#endif
+#endif /* BN_BITS2 != 64 */
+
+
+#define nist_set_192(to, from, a1, a2, a3) \
+	{ \
+	bn_cp_64(to, 0, from, (a3) - 3) \
+	bn_cp_64(to, 1, from, (a2) - 3) \
+	bn_cp_64(to, 2, from, (a1) - 3) \
+	}
+
+int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
+	BN_CTX *ctx)
+	{
+	int      top = a->top, i;
+	int      carry;
+	register BN_ULONG *r_d, *a_d = a->d;
+	BN_ULONG t_d[BN_NIST_192_TOP],
+	         buf[BN_NIST_192_TOP],
+		 c_d[BN_NIST_192_TOP],
+		*res;
+	PTR_SIZE_INT mask;
+	static const BIGNUM _bignum_nist_p_192_sqr = {
+		(BN_ULONG *)_nist_p_192_sqr,
+		sizeof(_nist_p_192_sqr)/sizeof(_nist_p_192_sqr[0]),
+		sizeof(_nist_p_192_sqr)/sizeof(_nist_p_192_sqr[0]),
+		0,BN_FLG_STATIC_DATA };
+
+	field = &_bignum_nist_p_192; /* just to make sure */
+
+ 	if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_192_sqr)>=0)
+		return BN_nnmod(r, a, field, ctx);
+
+	i = BN_ucmp(field, a);
+	if (i == 0)
+		{
+		BN_zero(r);
+		return 1;
+		}
+	else if (i > 0)
+		return (r == a) ? 1 : (BN_copy(r ,a) != NULL);
+
+	if (r != a)
+		{
+		if (!bn_wexpand(r, BN_NIST_192_TOP))
+			return 0;
+		r_d = r->d;
+		nist_cp_bn(r_d, a_d, BN_NIST_192_TOP);
+		}
+	else
+		r_d = a_d;
+
+	nist_cp_bn_0(buf, a_d + BN_NIST_192_TOP, top - BN_NIST_192_TOP, BN_NIST_192_TOP);
+
+	nist_set_192(t_d, buf, 0, 3, 3);
+	carry = (int)bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP);
+	nist_set_192(t_d, buf, 4, 4, 0);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP);
+	nist_set_192(t_d, buf, 5, 5, 5)
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP);
+
+	if (carry > 0)
+		carry = (int)bn_sub_words(r_d,r_d,_nist_p_192[carry-1],BN_NIST_192_TOP);
+	else
+		carry = 1;
+
+	/*
+	 * we need 'if (carry==0 || result>=modulus) result-=modulus;'
+	 * as comparison implies subtraction, we can write
+	 * 'tmp=result-modulus; if (!carry || !borrow) result=tmp;'
+	 * this is what happens below, but without explicit if:-) a.
+	 */
+	mask  = 0-(PTR_SIZE_INT)bn_sub_words(c_d,r_d,_nist_p_192[0],BN_NIST_192_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)
+	 (((PTR_SIZE_INT)c_d&~mask) | ((PTR_SIZE_INT)r_d&mask));
+	nist_cp_bn(r_d, res, BN_NIST_192_TOP);
+	r->top = BN_NIST_192_TOP;
+	bn_correct_top(r);
+
+	return 1;
+	}
+
+typedef BN_ULONG (*bn_addsub_f)(BN_ULONG *,const BN_ULONG *,const BN_ULONG *,int);
+
+#define nist_set_224(to, from, a1, a2, a3, a4, a5, a6, a7) \
+	{ \
+	bn_cp_32(to, 0, from, (a7) - 7) \
+	bn_cp_32(to, 1, from, (a6) - 7) \
+	bn_cp_32(to, 2, from, (a5) - 7) \
+	bn_cp_32(to, 3, from, (a4) - 7) \
+	bn_cp_32(to, 4, from, (a3) - 7) \
+	bn_cp_32(to, 5, from, (a2) - 7) \
+	bn_cp_32(to, 6, from, (a1) - 7) \
+	}
+
+int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
+	BN_CTX *ctx)
+	{
+	int	top = a->top, i;
+	int	carry;
+	BN_ULONG *r_d, *a_d = a->d;
+	BN_ULONG t_d[BN_NIST_224_TOP],
+	         buf[BN_NIST_224_TOP],
+		 c_d[BN_NIST_224_TOP],
+		*res;
+	PTR_SIZE_INT mask;
+	union { bn_addsub_f f; PTR_SIZE_INT p; } u;
+	static const BIGNUM _bignum_nist_p_224_sqr = {
+		(BN_ULONG *)_nist_p_224_sqr,
+		sizeof(_nist_p_224_sqr)/sizeof(_nist_p_224_sqr[0]),
+		sizeof(_nist_p_224_sqr)/sizeof(_nist_p_224_sqr[0]),
+		0,BN_FLG_STATIC_DATA };
+
+
+	field = &_bignum_nist_p_224; /* just to make sure */
+
+ 	if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_224_sqr)>=0)
+		return BN_nnmod(r, a, field, ctx);
+
+	i = BN_ucmp(field, a);
+	if (i == 0)
+		{
+		BN_zero(r);
+		return 1;
+		}
+	else if (i > 0)
+		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
+
+	if (r != a)
+		{
+		if (!bn_wexpand(r, BN_NIST_224_TOP))
+			return 0;
+		r_d = r->d;
+		nist_cp_bn(r_d, a_d, BN_NIST_224_TOP);
+		}
+	else
+		r_d = a_d;
+
+#if BN_BITS2==64
+	/* copy upper 256 bits of 448 bit number ... */
+	nist_cp_bn_0(t_d, a_d + (BN_NIST_224_TOP-1), top - (BN_NIST_224_TOP-1), BN_NIST_224_TOP);
+	/* ... and right shift by 32 to obtain upper 224 bits */
+	nist_set_224(buf, t_d, 14, 13, 12, 11, 10, 9, 8);
+	/* truncate lower part to 224 bits too */
+	r_d[BN_NIST_224_TOP-1] &= BN_MASK2l;
+#else
+	nist_cp_bn_0(buf, a_d + BN_NIST_224_TOP, top - BN_NIST_224_TOP, BN_NIST_224_TOP);
+#endif
+	nist_set_224(t_d, buf, 10, 9, 8, 7, 0, 0, 0);
+	carry = (int)bn_add_words(r_d, r_d, t_d, BN_NIST_224_TOP);
+	nist_set_224(t_d, buf, 0, 13, 12, 11, 0, 0, 0);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_224_TOP);
+	nist_set_224(t_d, buf, 13, 12, 11, 10, 9, 8, 7);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_224_TOP);
+	nist_set_224(t_d, buf, 0, 0, 0, 0, 13, 12, 11);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_224_TOP);
+
+#if BN_BITS2==64
+	carry = (int)(r_d[BN_NIST_224_TOP-1]>>32);
+#endif
+	u.f = bn_sub_words;
+	if (carry > 0)
+		{
+		carry = (int)bn_sub_words(r_d,r_d,_nist_p_224[carry-1],BN_NIST_224_TOP);
+#if BN_BITS2==64
+		carry=(int)(~(r_d[BN_NIST_224_TOP-1]>>32))&1;
+#endif
+		}
+	else if (carry < 0)
+		{
+		/* it's a bit more comlicated logic in this case.
+		 * if bn_add_words yields no carry, then result
+		 * has to be adjusted by unconditionally *adding*
+		 * the modulus. but if it does, then result has
+		 * to be compared to the modulus and conditionally
+		 * adjusted by *subtracting* the latter. */
+		carry = (int)bn_add_words(r_d,r_d,_nist_p_224[-carry-1],BN_NIST_224_TOP);
+		mask = 0-(PTR_SIZE_INT)carry;
+		u.p = ((PTR_SIZE_INT)bn_sub_words&mask) |
+		 ((PTR_SIZE_INT)bn_add_words&~mask);
+		}
+	else
+		carry = 1;
+
+	/* otherwise it's effectively same as in BN_nist_mod_192... */
+	mask  = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_224[0],BN_NIST_224_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
+	nist_cp_bn(r_d, res, BN_NIST_224_TOP);
+	r->top = BN_NIST_224_TOP;
+	bn_correct_top(r);
+
+	return 1;
+	}
+
+#define nist_set_256(to, from, a1, a2, a3, a4, a5, a6, a7, a8) \
+	{ \
+	bn_cp_32(to, 0, from, (a8) - 8) \
+	bn_cp_32(to, 1, from, (a7) - 8) \
+	bn_cp_32(to, 2, from, (a6) - 8) \
+	bn_cp_32(to, 3, from, (a5) - 8) \
+	bn_cp_32(to, 4, from, (a4) - 8) \
+	bn_cp_32(to, 5, from, (a3) - 8) \
+	bn_cp_32(to, 6, from, (a2) - 8) \
+	bn_cp_32(to, 7, from, (a1) - 8) \
+	}
+
+int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
+	BN_CTX *ctx)
+	{
+	int	i, top = a->top;
+	int	carry = 0;
+	register BN_ULONG *a_d = a->d, *r_d;
+	BN_ULONG t_d[BN_NIST_256_TOP],
+	         buf[BN_NIST_256_TOP],
+		 c_d[BN_NIST_256_TOP],
+		*res;
+	PTR_SIZE_INT mask;
+	union { bn_addsub_f f; PTR_SIZE_INT p; } u;
+	static const BIGNUM _bignum_nist_p_256_sqr = {
+		(BN_ULONG *)_nist_p_256_sqr,
+		sizeof(_nist_p_256_sqr)/sizeof(_nist_p_256_sqr[0]),
+		sizeof(_nist_p_256_sqr)/sizeof(_nist_p_256_sqr[0]),
+		0,BN_FLG_STATIC_DATA };
+
+	field = &_bignum_nist_p_256; /* just to make sure */
+
+ 	if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_256_sqr)>=0)
+		return BN_nnmod(r, a, field, ctx);
+
+	i = BN_ucmp(field, a);
+	if (i == 0)
+		{
+		BN_zero(r);
+		return 1;
+		}
+	else if (i > 0)
+		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
+
+	if (r != a)
+		{
+		if (!bn_wexpand(r, BN_NIST_256_TOP))
+			return 0;
+		r_d = r->d;
+		nist_cp_bn(r_d, a_d, BN_NIST_256_TOP);
+		}
+	else
+		r_d = a_d;
+
+	nist_cp_bn_0(buf, a_d + BN_NIST_256_TOP, top - BN_NIST_256_TOP, BN_NIST_256_TOP);
+
+	/*S1*/
+	nist_set_256(t_d, buf, 15, 14, 13, 12, 11, 0, 0, 0);
+	/*S2*/
+	nist_set_256(c_d, buf, 0, 15, 14, 13, 12, 0, 0, 0);
+	carry = (int)bn_add_words(t_d, t_d, c_d, BN_NIST_256_TOP);
+	/* left shift */
+		{
+		register BN_ULONG *ap,t,c;
+		ap = t_d;
+		c=0;
+		for (i = BN_NIST_256_TOP; i != 0; --i)
+			{
+			t= *ap;
+			*(ap++)=((t<<1)|c)&BN_MASK2;
+			c=(t & BN_TBIT)?1:0;
+			}
+		carry <<= 1;
+		carry  |= c;
+		}
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP);
+	/*S3*/
+	nist_set_256(t_d, buf, 15, 14, 0, 0, 0, 10, 9, 8);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP);
+	/*S4*/
+	nist_set_256(t_d, buf, 8, 13, 15, 14, 13, 11, 10, 9);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP);
+	/*D1*/
+	nist_set_256(t_d, buf, 10, 8, 0, 0, 0, 13, 12, 11);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP);
+	/*D2*/
+	nist_set_256(t_d, buf, 11, 9, 0, 0, 15, 14, 13, 12);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP);
+	/*D3*/
+	nist_set_256(t_d, buf, 12, 0, 10, 9, 8, 15, 14, 13);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP);
+	/*D4*/
+	nist_set_256(t_d, buf, 13, 0, 11, 10, 9, 0, 15, 14);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP);
+
+	/* see BN_nist_mod_224 for explanation */
+	u.f = bn_sub_words;
+	if (carry > 0)
+		carry = (int)bn_sub_words(r_d,r_d,_nist_p_256[carry-1],BN_NIST_256_TOP);
+	else if (carry < 0)
+		{
+		carry = (int)bn_add_words(r_d,r_d,_nist_p_256[-carry-1],BN_NIST_256_TOP);
+		mask = 0-(PTR_SIZE_INT)carry;
+		u.p = ((PTR_SIZE_INT)bn_sub_words&mask) |
+		 ((PTR_SIZE_INT)bn_add_words&~mask);
+		}
+	else
+		carry = 1;
+
+	mask  = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_256[0],BN_NIST_256_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
+	nist_cp_bn(r_d, res, BN_NIST_256_TOP);
+	r->top = BN_NIST_256_TOP;
+	bn_correct_top(r);
+
+	return 1;
+	}
+
+#define nist_set_384(to,from,a1,a2,a3,a4,a5,a6,a7,a8,a9,a10,a11,a12) \
+	{ \
+	bn_cp_32(to, 0, from,  (a12) - 12) \
+	bn_cp_32(to, 1, from,  (a11) - 12) \
+	bn_cp_32(to, 2, from,  (a10) - 12) \
+	bn_cp_32(to, 3, from,  (a9) - 12)  \
+	bn_cp_32(to, 4, from,  (a8) - 12)  \
+	bn_cp_32(to, 5, from,  (a7) - 12)  \
+	bn_cp_32(to, 6, from,  (a6) - 12)  \
+	bn_cp_32(to, 7, from,  (a5) - 12)  \
+	bn_cp_32(to, 8, from,  (a4) - 12)  \
+	bn_cp_32(to, 9, from,  (a3) - 12)  \
+	bn_cp_32(to, 10, from, (a2) - 12)  \
+	bn_cp_32(to, 11, from, (a1) - 12)  \
+	}
+
+int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
+	BN_CTX *ctx)
+	{
+	int	i, top = a->top;
+	int	carry = 0;
+	register BN_ULONG *r_d, *a_d = a->d;
+	BN_ULONG t_d[BN_NIST_384_TOP],
+	         buf[BN_NIST_384_TOP],
+		 c_d[BN_NIST_384_TOP],
+		*res;
+	PTR_SIZE_INT mask;
+	union { bn_addsub_f f; PTR_SIZE_INT p; } u;
+	static const BIGNUM _bignum_nist_p_384_sqr = {
+		(BN_ULONG *)_nist_p_384_sqr,
+		sizeof(_nist_p_384_sqr)/sizeof(_nist_p_384_sqr[0]),
+		sizeof(_nist_p_384_sqr)/sizeof(_nist_p_384_sqr[0]),
+		0,BN_FLG_STATIC_DATA };
+
+
+	field = &_bignum_nist_p_384; /* just to make sure */
+
+ 	if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_384_sqr)>=0)
+		return BN_nnmod(r, a, field, ctx);
+
+	i = BN_ucmp(field, a);
+	if (i == 0)
+		{
+		BN_zero(r);
+		return 1;
+		}
+	else if (i > 0)
+		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
+
+	if (r != a)
+		{
+		if (!bn_wexpand(r, BN_NIST_384_TOP))
+			return 0;
+		r_d = r->d;
+		nist_cp_bn(r_d, a_d, BN_NIST_384_TOP);
+		}
+	else
+		r_d = a_d;
+
+	nist_cp_bn_0(buf, a_d + BN_NIST_384_TOP, top - BN_NIST_384_TOP, BN_NIST_384_TOP);
+
+	/*S1*/
+	nist_set_256(t_d, buf, 0, 0, 0, 0, 0, 23-4, 22-4, 21-4);
+		/* left shift */
+		{
+		register BN_ULONG *ap,t,c;
+		ap = t_d;
+		c=0;
+		for (i = 3; i != 0; --i)
+			{
+			t= *ap;
+			*(ap++)=((t<<1)|c)&BN_MASK2;
+			c=(t & BN_TBIT)?1:0;
+			}
+		*ap=c;
+		}
+	carry = (int)bn_add_words(r_d+(128/BN_BITS2), r_d+(128/BN_BITS2), 
+		t_d, BN_NIST_256_TOP);
+	/*S2 */
+	carry += (int)bn_add_words(r_d, r_d, buf, BN_NIST_384_TOP);
+	/*S3*/
+	nist_set_384(t_d,buf,20,19,18,17,16,15,14,13,12,23,22,21);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP);
+	/*S4*/
+	nist_set_384(t_d,buf,19,18,17,16,15,14,13,12,20,0,23,0);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP);
+	/*S5*/
+	nist_set_384(t_d, buf,0,0,0,0,23,22,21,20,0,0,0,0);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP);
+	/*S6*/
+	nist_set_384(t_d,buf,0,0,0,0,0,0,23,22,21,0,0,20);
+	carry += (int)bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP);
+	/*D1*/
+	nist_set_384(t_d,buf,22,21,20,19,18,17,16,15,14,13,12,23);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP);
+	/*D2*/
+	nist_set_384(t_d,buf,0,0,0,0,0,0,0,23,22,21,20,0);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP);
+	/*D3*/
+	nist_set_384(t_d,buf,0,0,0,0,0,0,0,23,23,0,0,0);
+	carry -= (int)bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP);
+
+	/* see BN_nist_mod_224 for explanation */
+	u.f = bn_sub_words;
+	if (carry > 0)
+		carry = (int)bn_sub_words(r_d,r_d,_nist_p_384[carry-1],BN_NIST_384_TOP);
+	else if (carry < 0)
+		{
+		carry = (int)bn_add_words(r_d,r_d,_nist_p_384[-carry-1],BN_NIST_384_TOP);
+		mask = 0-(PTR_SIZE_INT)carry;
+		u.p = ((PTR_SIZE_INT)bn_sub_words&mask) |
+		 ((PTR_SIZE_INT)bn_add_words&~mask);
+		}
+	else
+		carry = 1;
+
+	mask  = 0-(PTR_SIZE_INT)(*u.f)(c_d,r_d,_nist_p_384[0],BN_NIST_384_TOP);
+	mask &= 0-(PTR_SIZE_INT)carry;
+	res   = (BN_ULONG *)(((PTR_SIZE_INT)c_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
+	nist_cp_bn(r_d, res, BN_NIST_384_TOP);
+	r->top = BN_NIST_384_TOP;
+	bn_correct_top(r);
+
+	return 1;
+	}
+
+#define BN_NIST_521_RSHIFT	(521%BN_BITS2)
+#define BN_NIST_521_LSHIFT	(BN_BITS2-BN_NIST_521_RSHIFT)
+#define BN_NIST_521_TOP_MASK	((BN_ULONG)BN_MASK2>>BN_NIST_521_LSHIFT)
+
+int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
+	BN_CTX *ctx)
+	{
+	int	top = a->top, i;
+	BN_ULONG *r_d, *a_d = a->d,
+		 t_d[BN_NIST_521_TOP],
+		 val,tmp,*res;
+	PTR_SIZE_INT mask;
+	static const BIGNUM _bignum_nist_p_521_sqr = {
+		(BN_ULONG *)_nist_p_521_sqr,
+		sizeof(_nist_p_521_sqr)/sizeof(_nist_p_521_sqr[0]),
+		sizeof(_nist_p_521_sqr)/sizeof(_nist_p_521_sqr[0]),
+		0,BN_FLG_STATIC_DATA };
+
+	field = &_bignum_nist_p_521; /* just to make sure */
+
+ 	if (BN_is_negative(a) || BN_ucmp(a,&_bignum_nist_p_521_sqr)>=0)
+		return BN_nnmod(r, a, field, ctx);
+
+	i = BN_ucmp(field, a);
+	if (i == 0)
+		{
+		BN_zero(r);
+		return 1;
+		}
+	else if (i > 0)
+		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
+
+	if (r != a)
+		{
+		if (!bn_wexpand(r,BN_NIST_521_TOP))
+			return 0;
+		r_d = r->d;
+		nist_cp_bn(r_d,a_d, BN_NIST_521_TOP);
+		}
+	else
+		r_d = a_d;
+
+	/* upper 521 bits, copy ... */
+	nist_cp_bn_0(t_d,a_d + (BN_NIST_521_TOP-1), top - (BN_NIST_521_TOP-1),BN_NIST_521_TOP);
+	/* ... and right shift */
+	for (val=t_d[0],i=0; i<BN_NIST_521_TOP-1; i++)
+		{
+		tmp = val>>BN_NIST_521_RSHIFT;
+		val = t_d[i+1];
+		t_d[i] = (tmp | val<<BN_NIST_521_LSHIFT) & BN_MASK2;
+		}
+	t_d[i] = val>>BN_NIST_521_RSHIFT;
+	/* lower 521 bits */
+	r_d[i] &= BN_NIST_521_TOP_MASK;
+
+	bn_add_words(r_d,r_d,t_d,BN_NIST_521_TOP);
+	mask = 0-(PTR_SIZE_INT)bn_sub_words(t_d,r_d,_nist_p_521,BN_NIST_521_TOP);
+	res  = (BN_ULONG *)(((PTR_SIZE_INT)t_d&~mask) |
+	 ((PTR_SIZE_INT)r_d&mask));
+	nist_cp_bn(r_d,res,BN_NIST_521_TOP);
+	r->top = BN_NIST_521_TOP;
+	bn_correct_top(r);
+
+	return 1;
+	}
diff --git a/app/openssl/crypto/bn/bn_prime.c b/app/openssl/crypto/bn/bn_prime.c
new file mode 100644
index 00000000..7b25979d
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_prime.c
@@ -0,0 +1,494 @@
+/* crypto/bn/bn_prime.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <stdio.h>
+#include <time.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+#include <openssl/rand.h>
+
+/* NB: these functions have been "upgraded", the deprecated versions (which are
+ * compatibility wrappers using these functions) are in bn_depr.c.
+ * - Geoff
+ */
+
+/* The quick sieve algorithm approach to weeding out primes is
+ * Philip Zimmermann's, as implemented in PGP.  I have had a read of
+ * his comments and implemented my own version.
+ */
+#include "bn_prime.h"
+
+static int witness(BIGNUM *w, const BIGNUM *a, const BIGNUM *a1,
+	const BIGNUM *a1_odd, int k, BN_CTX *ctx, BN_MONT_CTX *mont);
+static int probable_prime(BIGNUM *rnd, int bits);
+static int probable_prime_dh(BIGNUM *rnd, int bits,
+	const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx);
+static int probable_prime_dh_safe(BIGNUM *rnd, int bits,
+	const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx);
+
+int BN_GENCB_call(BN_GENCB *cb, int a, int b)
+	{
+	/* No callback means continue */
+	if(!cb) return 1;
+	switch(cb->ver)
+		{
+	case 1:
+		/* Deprecated-style callbacks */
+		if(!cb->cb.cb_1)
+			return 1;
+		cb->cb.cb_1(a, b, cb->arg);
+		return 1;
+	case 2:
+		/* New-style callbacks */
+		return cb->cb.cb_2(a, b, cb);
+	default:
+		break;
+		}
+	/* Unrecognised callback type */
+	return 0;
+	}
+
+int BN_generate_prime_ex(BIGNUM *ret, int bits, int safe,
+	const BIGNUM *add, const BIGNUM *rem, BN_GENCB *cb)
+	{
+	BIGNUM *t;
+	int found=0;
+	int i,j,c1=0;
+	BN_CTX *ctx;
+	int checks = BN_prime_checks_for_size(bits);
+
+	ctx=BN_CTX_new();
+	if (ctx == NULL) goto err;
+	BN_CTX_start(ctx);
+	t = BN_CTX_get(ctx);
+	if(!t) goto err;
+loop: 
+	/* make a random number and set the top and bottom bits */
+	if (add == NULL)
+		{
+		if (!probable_prime(ret,bits)) goto err;
+		}
+	else
+		{
+		if (safe)
+			{
+			if (!probable_prime_dh_safe(ret,bits,add,rem,ctx))
+				 goto err;
+			}
+		else
+			{
+			if (!probable_prime_dh(ret,bits,add,rem,ctx))
+				goto err;
+			}
+		}
+	/* if (BN_mod_word(ret,(BN_ULONG)3) == 1) goto loop; */
+	if(!BN_GENCB_call(cb, 0, c1++))
+		/* aborted */
+		goto err;
+
+	if (!safe)
+		{
+		i=BN_is_prime_fasttest_ex(ret,checks,ctx,0,cb);
+		if (i == -1) goto err;
+		if (i == 0) goto loop;
+		}
+	else
+		{
+		/* for "safe prime" generation,
+		 * check that (p-1)/2 is prime.
+		 * Since a prime is odd, We just
+		 * need to divide by 2 */
+		if (!BN_rshift1(t,ret)) goto err;
+
+		for (i=0; i<checks; i++)
+			{
+			j=BN_is_prime_fasttest_ex(ret,1,ctx,0,cb);
+			if (j == -1) goto err;
+			if (j == 0) goto loop;
+
+			j=BN_is_prime_fasttest_ex(t,1,ctx,0,cb);
+			if (j == -1) goto err;
+			if (j == 0) goto loop;
+
+			if(!BN_GENCB_call(cb, 2, c1-1))
+				goto err;
+			/* We have a safe prime test pass */
+			}
+		}
+	/* we have a prime :-) */
+	found = 1;
+err:
+	if (ctx != NULL)
+		{
+		BN_CTX_end(ctx);
+		BN_CTX_free(ctx);
+		}
+	bn_check_top(ret);
+	return found;
+	}
+
+int BN_is_prime_ex(const BIGNUM *a, int checks, BN_CTX *ctx_passed, BN_GENCB *cb)
+	{
+	return BN_is_prime_fasttest_ex(a, checks, ctx_passed, 0, cb);
+	}
+
+int BN_is_prime_fasttest_ex(const BIGNUM *a, int checks, BN_CTX *ctx_passed,
+		int do_trial_division, BN_GENCB *cb)
+	{
+	int i, j, ret = -1;
+	int k;
+	BN_CTX *ctx = NULL;
+	BIGNUM *A1, *A1_odd, *check; /* taken from ctx */
+	BN_MONT_CTX *mont = NULL;
+	const BIGNUM *A = NULL;
+
+	if (BN_cmp(a, BN_value_one()) <= 0)
+		return 0;
+	
+	if (checks == BN_prime_checks)
+		checks = BN_prime_checks_for_size(BN_num_bits(a));
+
+	/* first look for small factors */
+	if (!BN_is_odd(a))
+		/* a is even => a is prime if and only if a == 2 */
+		return BN_is_word(a, 2);
+	if (do_trial_division)
+		{
+		for (i = 1; i < NUMPRIMES; i++)
+			if (BN_mod_word(a, primes[i]) == 0) 
+				return 0;
+		if(!BN_GENCB_call(cb, 1, -1))
+			goto err;
+		}
+
+	if (ctx_passed != NULL)
+		ctx = ctx_passed;
+	else
+		if ((ctx=BN_CTX_new()) == NULL)
+			goto err;
+	BN_CTX_start(ctx);
+
+	/* A := abs(a) */
+	if (a->neg)
+		{
+		BIGNUM *t;
+		if ((t = BN_CTX_get(ctx)) == NULL) goto err;
+		BN_copy(t, a);
+		t->neg = 0;
+		A = t;
+		}
+	else
+		A = a;
+	A1 = BN_CTX_get(ctx);
+	A1_odd = BN_CTX_get(ctx);
+	check = BN_CTX_get(ctx);
+	if (check == NULL) goto err;
+
+	/* compute A1 := A - 1 */
+	if (!BN_copy(A1, A))
+		goto err;
+	if (!BN_sub_word(A1, 1))
+		goto err;
+	if (BN_is_zero(A1))
+		{
+		ret = 0;
+		goto err;
+		}
+
+	/* write  A1  as  A1_odd * 2^k */
+	k = 1;
+	while (!BN_is_bit_set(A1, k))
+		k++;
+	if (!BN_rshift(A1_odd, A1, k))
+		goto err;
+
+	/* Montgomery setup for computations mod A */
+	mont = BN_MONT_CTX_new();
+	if (mont == NULL)
+		goto err;
+	if (!BN_MONT_CTX_set(mont, A, ctx))
+		goto err;
+	
+	for (i = 0; i < checks; i++)
+		{
+		if (!BN_pseudo_rand_range(check, A1))
+			goto err;
+		if (!BN_add_word(check, 1))
+			goto err;
+		/* now 1 <= check < A */
+
+		j = witness(check, A, A1, A1_odd, k, ctx, mont);
+		if (j == -1) goto err;
+		if (j)
+			{
+			ret=0;
+			goto err;
+			}
+		if(!BN_GENCB_call(cb, 1, i))
+			goto err;
+		}
+	ret=1;
+err:
+	if (ctx != NULL)
+		{
+		BN_CTX_end(ctx);
+		if (ctx_passed == NULL)
+			BN_CTX_free(ctx);
+		}
+	if (mont != NULL)
+		BN_MONT_CTX_free(mont);
+
+	return(ret);
+	}
+
+static int witness(BIGNUM *w, const BIGNUM *a, const BIGNUM *a1,
+	const BIGNUM *a1_odd, int k, BN_CTX *ctx, BN_MONT_CTX *mont)
+	{
+	if (!BN_mod_exp_mont(w, w, a1_odd, a, ctx, mont)) /* w := w^a1_odd mod a */
+		return -1;
+	if (BN_is_one(w))
+		return 0; /* probably prime */
+	if (BN_cmp(w, a1) == 0)
+		return 0; /* w == -1 (mod a),  'a' is probably prime */
+	while (--k)
+		{
+		if (!BN_mod_mul(w, w, w, a, ctx)) /* w := w^2 mod a */
+			return -1;
+		if (BN_is_one(w))
+			return 1; /* 'a' is composite, otherwise a previous 'w' would
+			           * have been == -1 (mod 'a') */
+		if (BN_cmp(w, a1) == 0)
+			return 0; /* w == -1 (mod a), 'a' is probably prime */
+		}
+	/* If we get here, 'w' is the (a-1)/2-th power of the original 'w',
+	 * and it is neither -1 nor +1 -- so 'a' cannot be prime */
+	bn_check_top(w);
+	return 1;
+	}
+
+static int probable_prime(BIGNUM *rnd, int bits)
+	{
+	int i;
+	prime_t mods[NUMPRIMES];
+	BN_ULONG delta,maxdelta;
+
+again:
+	if (!BN_rand(rnd,bits,1,1)) return(0);
+	/* we now have a random number 'rand' to test. */
+	for (i=1; i<NUMPRIMES; i++)
+		mods[i]=(prime_t)BN_mod_word(rnd,(BN_ULONG)primes[i]);
+	maxdelta=BN_MASK2 - primes[NUMPRIMES-1];
+	delta=0;
+	loop: for (i=1; i<NUMPRIMES; i++)
+		{
+		/* check that rnd is not a prime and also
+		 * that gcd(rnd-1,primes) == 1 (except for 2) */
+		if (((mods[i]+delta)%primes[i]) <= 1)
+			{
+			delta+=2;
+			if (delta > maxdelta) goto again;
+			goto loop;
+			}
+		}
+	if (!BN_add_word(rnd,delta)) return(0);
+	bn_check_top(rnd);
+	return(1);
+	}
+
+static int probable_prime_dh(BIGNUM *rnd, int bits,
+	const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx)
+	{
+	int i,ret=0;
+	BIGNUM *t1;
+
+	BN_CTX_start(ctx);
+	if ((t1 = BN_CTX_get(ctx)) == NULL) goto err;
+
+	if (!BN_rand(rnd,bits,0,1)) goto err;
+
+	/* we need ((rnd-rem) % add) == 0 */
+
+	if (!BN_mod(t1,rnd,add,ctx)) goto err;
+	if (!BN_sub(rnd,rnd,t1)) goto err;
+	if (rem == NULL)
+		{ if (!BN_add_word(rnd,1)) goto err; }
+	else
+		{ if (!BN_add(rnd,rnd,rem)) goto err; }
+
+	/* we now have a random number 'rand' to test. */
+
+	loop: for (i=1; i<NUMPRIMES; i++)
+		{
+		/* check that rnd is a prime */
+		if (BN_mod_word(rnd,(BN_ULONG)primes[i]) <= 1)
+			{
+			if (!BN_add(rnd,rnd,add)) goto err;
+			goto loop;
+			}
+		}
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	bn_check_top(rnd);
+	return(ret);
+	}
+
+static int probable_prime_dh_safe(BIGNUM *p, int bits, const BIGNUM *padd,
+	const BIGNUM *rem, BN_CTX *ctx)
+	{
+	int i,ret=0;
+	BIGNUM *t1,*qadd,*q;
+
+	bits--;
+	BN_CTX_start(ctx);
+	t1 = BN_CTX_get(ctx);
+	q = BN_CTX_get(ctx);
+	qadd = BN_CTX_get(ctx);
+	if (qadd == NULL) goto err;
+
+	if (!BN_rshift1(qadd,padd)) goto err;
+		
+	if (!BN_rand(q,bits,0,1)) goto err;
+
+	/* we need ((rnd-rem) % add) == 0 */
+	if (!BN_mod(t1,q,qadd,ctx)) goto err;
+	if (!BN_sub(q,q,t1)) goto err;
+	if (rem == NULL)
+		{ if (!BN_add_word(q,1)) goto err; }
+	else
+		{
+		if (!BN_rshift1(t1,rem)) goto err;
+		if (!BN_add(q,q,t1)) goto err;
+		}
+
+	/* we now have a random number 'rand' to test. */
+	if (!BN_lshift1(p,q)) goto err;
+	if (!BN_add_word(p,1)) goto err;
+
+	loop: for (i=1; i<NUMPRIMES; i++)
+		{
+		/* check that p and q are prime */
+		/* check that for p and q
+		 * gcd(p-1,primes) == 1 (except for 2) */
+		if (	(BN_mod_word(p,(BN_ULONG)primes[i]) == 0) ||
+			(BN_mod_word(q,(BN_ULONG)primes[i]) == 0))
+			{
+			if (!BN_add(p,p,padd)) goto err;
+			if (!BN_add(q,q,qadd)) goto err;
+			goto loop;
+			}
+		}
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	bn_check_top(p);
+	return(ret);
+	}
diff --git a/app/openssl/crypto/bn/bn_prime.h b/app/openssl/crypto/bn/bn_prime.h
new file mode 100644
index 00000000..51d2194f
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_prime.h
@@ -0,0 +1,327 @@
+/* Auto generated by bn_prime.pl */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef EIGHT_BIT
+#define NUMPRIMES 2048
+typedef unsigned short prime_t;
+#else
+#define NUMPRIMES 54
+typedef unsigned char prime_t;
+#endif
+static const prime_t primes[NUMPRIMES]=
+	{
+	   2,   3,   5,   7,  11,  13,  17,  19,
+	  23,  29,  31,  37,  41,  43,  47,  53,
+	  59,  61,  67,  71,  73,  79,  83,  89,
+	  97, 101, 103, 107, 109, 113, 127, 131,
+	 137, 139, 149, 151, 157, 163, 167, 173,
+	 179, 181, 191, 193, 197, 199, 211, 223,
+	 227, 229, 233, 239, 241, 251,
+#ifndef EIGHT_BIT
+	 257, 263,
+	 269, 271, 277, 281, 283, 293, 307, 311,
+	 313, 317, 331, 337, 347, 349, 353, 359,
+	 367, 373, 379, 383, 389, 397, 401, 409,
+	 419, 421, 431, 433, 439, 443, 449, 457,
+	 461, 463, 467, 479, 487, 491, 499, 503,
+	 509, 521, 523, 541, 547, 557, 563, 569,
+	 571, 577, 587, 593, 599, 601, 607, 613,
+	 617, 619, 631, 641, 643, 647, 653, 659,
+	 661, 673, 677, 683, 691, 701, 709, 719,
+	 727, 733, 739, 743, 751, 757, 761, 769,
+	 773, 787, 797, 809, 811, 821, 823, 827,
+	 829, 839, 853, 857, 859, 863, 877, 881,
+	 883, 887, 907, 911, 919, 929, 937, 941,
+	 947, 953, 967, 971, 977, 983, 991, 997,
+	1009,1013,1019,1021,1031,1033,1039,1049,
+	1051,1061,1063,1069,1087,1091,1093,1097,
+	1103,1109,1117,1123,1129,1151,1153,1163,
+	1171,1181,1187,1193,1201,1213,1217,1223,
+	1229,1231,1237,1249,1259,1277,1279,1283,
+	1289,1291,1297,1301,1303,1307,1319,1321,
+	1327,1361,1367,1373,1381,1399,1409,1423,
+	1427,1429,1433,1439,1447,1451,1453,1459,
+	1471,1481,1483,1487,1489,1493,1499,1511,
+	1523,1531,1543,1549,1553,1559,1567,1571,
+	1579,1583,1597,1601,1607,1609,1613,1619,
+	1621,1627,1637,1657,1663,1667,1669,1693,
+	1697,1699,1709,1721,1723,1733,1741,1747,
+	1753,1759,1777,1783,1787,1789,1801,1811,
+	1823,1831,1847,1861,1867,1871,1873,1877,
+	1879,1889,1901,1907,1913,1931,1933,1949,
+	1951,1973,1979,1987,1993,1997,1999,2003,
+	2011,2017,2027,2029,2039,2053,2063,2069,
+	2081,2083,2087,2089,2099,2111,2113,2129,
+	2131,2137,2141,2143,2153,2161,2179,2203,
+	2207,2213,2221,2237,2239,2243,2251,2267,
+	2269,2273,2281,2287,2293,2297,2309,2311,
+	2333,2339,2341,2347,2351,2357,2371,2377,
+	2381,2383,2389,2393,2399,2411,2417,2423,
+	2437,2441,2447,2459,2467,2473,2477,2503,
+	2521,2531,2539,2543,2549,2551,2557,2579,
+	2591,2593,2609,2617,2621,2633,2647,2657,
+	2659,2663,2671,2677,2683,2687,2689,2693,
+	2699,2707,2711,2713,2719,2729,2731,2741,
+	2749,2753,2767,2777,2789,2791,2797,2801,
+	2803,2819,2833,2837,2843,2851,2857,2861,
+	2879,2887,2897,2903,2909,2917,2927,2939,
+	2953,2957,2963,2969,2971,2999,3001,3011,
+	3019,3023,3037,3041,3049,3061,3067,3079,
+	3083,3089,3109,3119,3121,3137,3163,3167,
+	3169,3181,3187,3191,3203,3209,3217,3221,
+	3229,3251,3253,3257,3259,3271,3299,3301,
+	3307,3313,3319,3323,3329,3331,3343,3347,
+	3359,3361,3371,3373,3389,3391,3407,3413,
+	3433,3449,3457,3461,3463,3467,3469,3491,
+	3499,3511,3517,3527,3529,3533,3539,3541,
+	3547,3557,3559,3571,3581,3583,3593,3607,
+	3613,3617,3623,3631,3637,3643,3659,3671,
+	3673,3677,3691,3697,3701,3709,3719,3727,
+	3733,3739,3761,3767,3769,3779,3793,3797,
+	3803,3821,3823,3833,3847,3851,3853,3863,
+	3877,3881,3889,3907,3911,3917,3919,3923,
+	3929,3931,3943,3947,3967,3989,4001,4003,
+	4007,4013,4019,4021,4027,4049,4051,4057,
+	4073,4079,4091,4093,4099,4111,4127,4129,
+	4133,4139,4153,4157,4159,4177,4201,4211,
+	4217,4219,4229,4231,4241,4243,4253,4259,
+	4261,4271,4273,4283,4289,4297,4327,4337,
+	4339,4349,4357,4363,4373,4391,4397,4409,
+	4421,4423,4441,4447,4451,4457,4463,4481,
+	4483,4493,4507,4513,4517,4519,4523,4547,
+	4549,4561,4567,4583,4591,4597,4603,4621,
+	4637,4639,4643,4649,4651,4657,4663,4673,
+	4679,4691,4703,4721,4723,4729,4733,4751,
+	4759,4783,4787,4789,4793,4799,4801,4813,
+	4817,4831,4861,4871,4877,4889,4903,4909,
+	4919,4931,4933,4937,4943,4951,4957,4967,
+	4969,4973,4987,4993,4999,5003,5009,5011,
+	5021,5023,5039,5051,5059,5077,5081,5087,
+	5099,5101,5107,5113,5119,5147,5153,5167,
+	5171,5179,5189,5197,5209,5227,5231,5233,
+	5237,5261,5273,5279,5281,5297,5303,5309,
+	5323,5333,5347,5351,5381,5387,5393,5399,
+	5407,5413,5417,5419,5431,5437,5441,5443,
+	5449,5471,5477,5479,5483,5501,5503,5507,
+	5519,5521,5527,5531,5557,5563,5569,5573,
+	5581,5591,5623,5639,5641,5647,5651,5653,
+	5657,5659,5669,5683,5689,5693,5701,5711,
+	5717,5737,5741,5743,5749,5779,5783,5791,
+	5801,5807,5813,5821,5827,5839,5843,5849,
+	5851,5857,5861,5867,5869,5879,5881,5897,
+	5903,5923,5927,5939,5953,5981,5987,6007,
+	6011,6029,6037,6043,6047,6053,6067,6073,
+	6079,6089,6091,6101,6113,6121,6131,6133,
+	6143,6151,6163,6173,6197,6199,6203,6211,
+	6217,6221,6229,6247,6257,6263,6269,6271,
+	6277,6287,6299,6301,6311,6317,6323,6329,
+	6337,6343,6353,6359,6361,6367,6373,6379,
+	6389,6397,6421,6427,6449,6451,6469,6473,
+	6481,6491,6521,6529,6547,6551,6553,6563,
+	6569,6571,6577,6581,6599,6607,6619,6637,
+	6653,6659,6661,6673,6679,6689,6691,6701,
+	6703,6709,6719,6733,6737,6761,6763,6779,
+	6781,6791,6793,6803,6823,6827,6829,6833,
+	6841,6857,6863,6869,6871,6883,6899,6907,
+	6911,6917,6947,6949,6959,6961,6967,6971,
+	6977,6983,6991,6997,7001,7013,7019,7027,
+	7039,7043,7057,7069,7079,7103,7109,7121,
+	7127,7129,7151,7159,7177,7187,7193,7207,
+	7211,7213,7219,7229,7237,7243,7247,7253,
+	7283,7297,7307,7309,7321,7331,7333,7349,
+	7351,7369,7393,7411,7417,7433,7451,7457,
+	7459,7477,7481,7487,7489,7499,7507,7517,
+	7523,7529,7537,7541,7547,7549,7559,7561,
+	7573,7577,7583,7589,7591,7603,7607,7621,
+	7639,7643,7649,7669,7673,7681,7687,7691,
+	7699,7703,7717,7723,7727,7741,7753,7757,
+	7759,7789,7793,7817,7823,7829,7841,7853,
+	7867,7873,7877,7879,7883,7901,7907,7919,
+	7927,7933,7937,7949,7951,7963,7993,8009,
+	8011,8017,8039,8053,8059,8069,8081,8087,
+	8089,8093,8101,8111,8117,8123,8147,8161,
+	8167,8171,8179,8191,8209,8219,8221,8231,
+	8233,8237,8243,8263,8269,8273,8287,8291,
+	8293,8297,8311,8317,8329,8353,8363,8369,
+	8377,8387,8389,8419,8423,8429,8431,8443,
+	8447,8461,8467,8501,8513,8521,8527,8537,
+	8539,8543,8563,8573,8581,8597,8599,8609,
+	8623,8627,8629,8641,8647,8663,8669,8677,
+	8681,8689,8693,8699,8707,8713,8719,8731,
+	8737,8741,8747,8753,8761,8779,8783,8803,
+	8807,8819,8821,8831,8837,8839,8849,8861,
+	8863,8867,8887,8893,8923,8929,8933,8941,
+	8951,8963,8969,8971,8999,9001,9007,9011,
+	9013,9029,9041,9043,9049,9059,9067,9091,
+	9103,9109,9127,9133,9137,9151,9157,9161,
+	9173,9181,9187,9199,9203,9209,9221,9227,
+	9239,9241,9257,9277,9281,9283,9293,9311,
+	9319,9323,9337,9341,9343,9349,9371,9377,
+	9391,9397,9403,9413,9419,9421,9431,9433,
+	9437,9439,9461,9463,9467,9473,9479,9491,
+	9497,9511,9521,9533,9539,9547,9551,9587,
+	9601,9613,9619,9623,9629,9631,9643,9649,
+	9661,9677,9679,9689,9697,9719,9721,9733,
+	9739,9743,9749,9767,9769,9781,9787,9791,
+	9803,9811,9817,9829,9833,9839,9851,9857,
+	9859,9871,9883,9887,9901,9907,9923,9929,
+	9931,9941,9949,9967,9973,10007,10009,10037,
+	10039,10061,10067,10069,10079,10091,10093,10099,
+	10103,10111,10133,10139,10141,10151,10159,10163,
+	10169,10177,10181,10193,10211,10223,10243,10247,
+	10253,10259,10267,10271,10273,10289,10301,10303,
+	10313,10321,10331,10333,10337,10343,10357,10369,
+	10391,10399,10427,10429,10433,10453,10457,10459,
+	10463,10477,10487,10499,10501,10513,10529,10531,
+	10559,10567,10589,10597,10601,10607,10613,10627,
+	10631,10639,10651,10657,10663,10667,10687,10691,
+	10709,10711,10723,10729,10733,10739,10753,10771,
+	10781,10789,10799,10831,10837,10847,10853,10859,
+	10861,10867,10883,10889,10891,10903,10909,10937,
+	10939,10949,10957,10973,10979,10987,10993,11003,
+	11027,11047,11057,11059,11069,11071,11083,11087,
+	11093,11113,11117,11119,11131,11149,11159,11161,
+	11171,11173,11177,11197,11213,11239,11243,11251,
+	11257,11261,11273,11279,11287,11299,11311,11317,
+	11321,11329,11351,11353,11369,11383,11393,11399,
+	11411,11423,11437,11443,11447,11467,11471,11483,
+	11489,11491,11497,11503,11519,11527,11549,11551,
+	11579,11587,11593,11597,11617,11621,11633,11657,
+	11677,11681,11689,11699,11701,11717,11719,11731,
+	11743,11777,11779,11783,11789,11801,11807,11813,
+	11821,11827,11831,11833,11839,11863,11867,11887,
+	11897,11903,11909,11923,11927,11933,11939,11941,
+	11953,11959,11969,11971,11981,11987,12007,12011,
+	12037,12041,12043,12049,12071,12073,12097,12101,
+	12107,12109,12113,12119,12143,12149,12157,12161,
+	12163,12197,12203,12211,12227,12239,12241,12251,
+	12253,12263,12269,12277,12281,12289,12301,12323,
+	12329,12343,12347,12373,12377,12379,12391,12401,
+	12409,12413,12421,12433,12437,12451,12457,12473,
+	12479,12487,12491,12497,12503,12511,12517,12527,
+	12539,12541,12547,12553,12569,12577,12583,12589,
+	12601,12611,12613,12619,12637,12641,12647,12653,
+	12659,12671,12689,12697,12703,12713,12721,12739,
+	12743,12757,12763,12781,12791,12799,12809,12821,
+	12823,12829,12841,12853,12889,12893,12899,12907,
+	12911,12917,12919,12923,12941,12953,12959,12967,
+	12973,12979,12983,13001,13003,13007,13009,13033,
+	13037,13043,13049,13063,13093,13099,13103,13109,
+	13121,13127,13147,13151,13159,13163,13171,13177,
+	13183,13187,13217,13219,13229,13241,13249,13259,
+	13267,13291,13297,13309,13313,13327,13331,13337,
+	13339,13367,13381,13397,13399,13411,13417,13421,
+	13441,13451,13457,13463,13469,13477,13487,13499,
+	13513,13523,13537,13553,13567,13577,13591,13597,
+	13613,13619,13627,13633,13649,13669,13679,13681,
+	13687,13691,13693,13697,13709,13711,13721,13723,
+	13729,13751,13757,13759,13763,13781,13789,13799,
+	13807,13829,13831,13841,13859,13873,13877,13879,
+	13883,13901,13903,13907,13913,13921,13931,13933,
+	13963,13967,13997,13999,14009,14011,14029,14033,
+	14051,14057,14071,14081,14083,14087,14107,14143,
+	14149,14153,14159,14173,14177,14197,14207,14221,
+	14243,14249,14251,14281,14293,14303,14321,14323,
+	14327,14341,14347,14369,14387,14389,14401,14407,
+	14411,14419,14423,14431,14437,14447,14449,14461,
+	14479,14489,14503,14519,14533,14537,14543,14549,
+	14551,14557,14561,14563,14591,14593,14621,14627,
+	14629,14633,14639,14653,14657,14669,14683,14699,
+	14713,14717,14723,14731,14737,14741,14747,14753,
+	14759,14767,14771,14779,14783,14797,14813,14821,
+	14827,14831,14843,14851,14867,14869,14879,14887,
+	14891,14897,14923,14929,14939,14947,14951,14957,
+	14969,14983,15013,15017,15031,15053,15061,15073,
+	15077,15083,15091,15101,15107,15121,15131,15137,
+	15139,15149,15161,15173,15187,15193,15199,15217,
+	15227,15233,15241,15259,15263,15269,15271,15277,
+	15287,15289,15299,15307,15313,15319,15329,15331,
+	15349,15359,15361,15373,15377,15383,15391,15401,
+	15413,15427,15439,15443,15451,15461,15467,15473,
+	15493,15497,15511,15527,15541,15551,15559,15569,
+	15581,15583,15601,15607,15619,15629,15641,15643,
+	15647,15649,15661,15667,15671,15679,15683,15727,
+	15731,15733,15737,15739,15749,15761,15767,15773,
+	15787,15791,15797,15803,15809,15817,15823,15859,
+	15877,15881,15887,15889,15901,15907,15913,15919,
+	15923,15937,15959,15971,15973,15991,16001,16007,
+	16033,16057,16061,16063,16067,16069,16073,16087,
+	16091,16097,16103,16111,16127,16139,16141,16183,
+	16187,16189,16193,16217,16223,16229,16231,16249,
+	16253,16267,16273,16301,16319,16333,16339,16349,
+	16361,16363,16369,16381,16411,16417,16421,16427,
+	16433,16447,16451,16453,16477,16481,16487,16493,
+	16519,16529,16547,16553,16561,16567,16573,16603,
+	16607,16619,16631,16633,16649,16651,16657,16661,
+	16673,16691,16693,16699,16703,16729,16741,16747,
+	16759,16763,16787,16811,16823,16829,16831,16843,
+	16871,16879,16883,16889,16901,16903,16921,16927,
+	16931,16937,16943,16963,16979,16981,16987,16993,
+	17011,17021,17027,17029,17033,17041,17047,17053,
+	17077,17093,17099,17107,17117,17123,17137,17159,
+	17167,17183,17189,17191,17203,17207,17209,17231,
+	17239,17257,17291,17293,17299,17317,17321,17327,
+	17333,17341,17351,17359,17377,17383,17387,17389,
+	17393,17401,17417,17419,17431,17443,17449,17467,
+	17471,17477,17483,17489,17491,17497,17509,17519,
+	17539,17551,17569,17573,17579,17581,17597,17599,
+	17609,17623,17627,17657,17659,17669,17681,17683,
+	17707,17713,17729,17737,17747,17749,17761,17783,
+	17789,17791,17807,17827,17837,17839,17851,17863,
+#endif
+	};
diff --git a/app/openssl/crypto/bn/bn_prime.pl b/app/openssl/crypto/bn/bn_prime.pl
new file mode 100644
index 00000000..3fafb6f3
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_prime.pl
@@ -0,0 +1,119 @@
+#!/usr/local/bin/perl
+# bn_prime.pl
+
+$num=2048;
+$num=$ARGV[0] if ($#ARGV >= 0);
+
+push(@primes,2);
+$p=1;
+loop: while ($#primes < $num-1)
+	{
+	$p+=2;
+	$s=int(sqrt($p));
+
+	for ($i=0; defined($primes[$i]) && $primes[$i]<=$s; $i++)
+		{
+		next loop if (($p%$primes[$i]) == 0);
+		}
+	push(@primes,$p);
+	}
+
+# print <<"EOF";
+# /* Auto generated by bn_prime.pl */
+# /* Copyright (C) 1995-1997 Eric Young (eay\@mincom.oz.au).
+#  * All rights reserved.
+#  * Copyright remains Eric Young's, and as such any Copyright notices in
+#  * the code are not to be removed.
+#  * See the COPYRIGHT file in the SSLeay distribution for more details.
+#  */
+# 
+# EOF
+
+print <<\EOF;
+/* Auto generated by bn_prime.pl */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+EOF
+
+for ($i=0; $i <= $#primes; $i++)
+	{
+	if ($primes[$i] > 256)
+		{
+		$eight=$i;
+		last;
+		}
+	}
+
+printf "#ifndef EIGHT_BIT\n";
+printf "#define NUMPRIMES %d\n",$num;
+printf "typedef unsigned short prime_t;\n";
+printf "#else\n";
+printf "#define NUMPRIMES %d\n",$eight;
+printf "typedef unsigned char prime_t;\n";
+printf "#endif\n";
+print "static const prime_t primes[NUMPRIMES]=\n\t{\n\t";
+$init=0;
+for ($i=0; $i <= $#primes; $i++)
+	{
+	printf "\n#ifndef EIGHT_BIT\n\t" if ($primes[$i] > 256) && !($init++);
+	printf("\n\t") if (($i%8) == 0) && ($i != 0);
+	printf("%4d,",$primes[$i]);
+	}
+print "\n#endif\n\t};\n";
+
+
diff --git a/app/openssl/crypto/bn/bn_print.c b/app/openssl/crypto/bn/bn_print.c
new file mode 100644
index 00000000..bebb466d
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_print.c
@@ -0,0 +1,359 @@
+/* crypto/bn/bn_print.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <ctype.h>
+#include "cryptlib.h"
+#include <openssl/buffer.h>
+#include "bn_lcl.h"
+
+static const char Hex[]="0123456789ABCDEF";
+
+/* Must 'OPENSSL_free' the returned data */
+char *BN_bn2hex(const BIGNUM *a)
+	{
+	int i,j,v,z=0;
+	char *buf;
+	char *p;
+
+	buf=(char *)OPENSSL_malloc(a->top*BN_BYTES*2+2);
+	if (buf == NULL)
+		{
+		BNerr(BN_F_BN_BN2HEX,ERR_R_MALLOC_FAILURE);
+		goto err;
+		}
+	p=buf;
+	if (a->neg) *(p++)='-';
+	if (BN_is_zero(a)) *(p++)='0';
+	for (i=a->top-1; i >=0; i--)
+		{
+		for (j=BN_BITS2-8; j >= 0; j-=8)
+			{
+			/* strip leading zeros */
+			v=((int)(a->d[i]>>(long)j))&0xff;
+			if (z || (v != 0))
+				{
+				*(p++)=Hex[v>>4];
+				*(p++)=Hex[v&0x0f];
+				z=1;
+				}
+			}
+		}
+	*p='\0';
+err:
+	return(buf);
+	}
+
+/* Must 'OPENSSL_free' the returned data */
+char *BN_bn2dec(const BIGNUM *a)
+	{
+	int i=0,num, ok = 0;
+	char *buf=NULL;
+	char *p;
+	BIGNUM *t=NULL;
+	BN_ULONG *bn_data=NULL,*lp;
+
+	/* get an upper bound for the length of the decimal integer
+	 * num <= (BN_num_bits(a) + 1) * log(2)
+	 *     <= 3 * BN_num_bits(a) * 0.1001 + log(2) + 1     (rounding error)
+	 *     <= BN_num_bits(a)/10 + BN_num_bits/1000 + 1 + 1 
+	 */
+	i=BN_num_bits(a)*3;
+	num=(i/10+i/1000+1)+1;
+	bn_data=(BN_ULONG *)OPENSSL_malloc((num/BN_DEC_NUM+1)*sizeof(BN_ULONG));
+	buf=(char *)OPENSSL_malloc(num+3);
+	if ((buf == NULL) || (bn_data == NULL))
+		{
+		BNerr(BN_F_BN_BN2DEC,ERR_R_MALLOC_FAILURE);
+		goto err;
+		}
+	if ((t=BN_dup(a)) == NULL) goto err;
+
+#define BUF_REMAIN (num+3 - (size_t)(p - buf))
+	p=buf;
+	lp=bn_data;
+	if (BN_is_zero(t))
+		{
+		*(p++)='0';
+		*(p++)='\0';
+		}
+	else
+		{
+		if (BN_is_negative(t))
+			*p++ = '-';
+
+		i=0;
+		while (!BN_is_zero(t))
+			{
+			*lp=BN_div_word(t,BN_DEC_CONV);
+			lp++;
+			}
+		lp--;
+		/* We now have a series of blocks, BN_DEC_NUM chars
+		 * in length, where the last one needs truncation.
+		 * The blocks need to be reversed in order. */
+		BIO_snprintf(p,BUF_REMAIN,BN_DEC_FMT1,*lp);
+		while (*p) p++;
+		while (lp != bn_data)
+			{
+			lp--;
+			BIO_snprintf(p,BUF_REMAIN,BN_DEC_FMT2,*lp);
+			while (*p) p++;
+			}
+		}
+	ok = 1;
+err:
+	if (bn_data != NULL) OPENSSL_free(bn_data);
+	if (t != NULL) BN_free(t);
+	if (!ok && buf)
+		{
+		OPENSSL_free(buf);
+		buf = NULL;
+		}
+
+	return(buf);
+	}
+
+int BN_hex2bn(BIGNUM **bn, const char *a)
+	{
+	BIGNUM *ret=NULL;
+	BN_ULONG l=0;
+	int neg=0,h,m,i,j,k,c;
+	int num;
+
+	if ((a == NULL) || (*a == '\0')) return(0);
+
+	if (*a == '-') { neg=1; a++; }
+
+	for (i=0; isxdigit((unsigned char) a[i]); i++)
+		;
+
+	num=i+neg;
+	if (bn == NULL) return(num);
+
+	/* a is the start of the hex digits, and it is 'i' long */
+	if (*bn == NULL)
+		{
+		if ((ret=BN_new()) == NULL) return(0);
+		}
+	else
+		{
+		ret= *bn;
+		BN_zero(ret);
+		}
+
+	/* i is the number of hex digests; */
+	if (bn_expand(ret,i*4) == NULL) goto err;
+
+	j=i; /* least significant 'hex' */
+	m=0;
+	h=0;
+	while (j > 0)
+		{
+		m=((BN_BYTES*2) <= j)?(BN_BYTES*2):j;
+		l=0;
+		for (;;)
+			{
+			c=a[j-m];
+			if ((c >= '0') && (c <= '9')) k=c-'0';
+			else if ((c >= 'a') && (c <= 'f')) k=c-'a'+10;
+			else if ((c >= 'A') && (c <= 'F')) k=c-'A'+10;
+			else k=0; /* paranoia */
+			l=(l<<4)|k;
+
+			if (--m <= 0)
+				{
+				ret->d[h++]=l;
+				break;
+				}
+			}
+		j-=(BN_BYTES*2);
+		}
+	ret->top=h;
+	bn_correct_top(ret);
+	ret->neg=neg;
+
+	*bn=ret;
+	bn_check_top(ret);
+	return(num);
+err:
+	if (*bn == NULL) BN_free(ret);
+	return(0);
+	}
+
+int BN_dec2bn(BIGNUM **bn, const char *a)
+	{
+	BIGNUM *ret=NULL;
+	BN_ULONG l=0;
+	int neg=0,i,j;
+	int num;
+
+	if ((a == NULL) || (*a == '\0')) return(0);
+	if (*a == '-') { neg=1; a++; }
+
+	for (i=0; isdigit((unsigned char) a[i]); i++)
+		;
+
+	num=i+neg;
+	if (bn == NULL) return(num);
+
+	/* a is the start of the digits, and it is 'i' long.
+	 * We chop it into BN_DEC_NUM digits at a time */
+	if (*bn == NULL)
+		{
+		if ((ret=BN_new()) == NULL) return(0);
+		}
+	else
+		{
+		ret= *bn;
+		BN_zero(ret);
+		}
+
+	/* i is the number of digests, a bit of an over expand; */
+	if (bn_expand(ret,i*4) == NULL) goto err;
+
+	j=BN_DEC_NUM-(i%BN_DEC_NUM);
+	if (j == BN_DEC_NUM) j=0;
+	l=0;
+	while (*a)
+		{
+		l*=10;
+		l+= *a-'0';
+		a++;
+		if (++j == BN_DEC_NUM)
+			{
+			BN_mul_word(ret,BN_DEC_CONV);
+			BN_add_word(ret,l);
+			l=0;
+			j=0;
+			}
+		}
+	ret->neg=neg;
+
+	bn_correct_top(ret);
+	*bn=ret;
+	bn_check_top(ret);
+	return(num);
+err:
+	if (*bn == NULL) BN_free(ret);
+	return(0);
+	}
+
+int BN_asc2bn(BIGNUM **bn, const char *a)
+	{
+	const char *p = a;
+	if (*p == '-')
+		p++;
+
+	if (p[0] == '0' && (p[1] == 'X' || p[1] == 'x'))
+		{		
+		if (!BN_hex2bn(bn, p + 2))
+			return 0;
+		}
+	else
+		{
+		if (!BN_dec2bn(bn, p))
+			return 0;
+		}
+	if (*a == '-')
+		(*bn)->neg = 1;
+	return 1;
+	}
+
+#ifndef OPENSSL_NO_BIO
+#ifndef OPENSSL_NO_FP_API
+int BN_print_fp(FILE *fp, const BIGNUM *a)
+	{
+	BIO *b;
+	int ret;
+
+	if ((b=BIO_new(BIO_s_file())) == NULL)
+		return(0);
+	BIO_set_fp(b,fp,BIO_NOCLOSE);
+	ret=BN_print(b,a);
+	BIO_free(b);
+	return(ret);
+	}
+#endif
+
+int BN_print(BIO *bp, const BIGNUM *a)
+	{
+	int i,j,v,z=0;
+	int ret=0;
+
+	if ((a->neg) && (BIO_write(bp,"-",1) != 1)) goto end;
+	if (BN_is_zero(a) && (BIO_write(bp,"0",1) != 1)) goto end;
+	for (i=a->top-1; i >=0; i--)
+		{
+		for (j=BN_BITS2-4; j >= 0; j-=4)
+			{
+			/* strip leading zeros */
+			v=((int)(a->d[i]>>(long)j))&0x0f;
+			if (z || (v != 0))
+				{
+				if (BIO_write(bp,&(Hex[v]),1) != 1)
+					goto end;
+				z=1;
+				}
+			}
+		}
+	ret=1;
+end:
+	return(ret);
+	}
+#endif
diff --git a/app/openssl/crypto/bn/bn_rand.c b/app/openssl/crypto/bn/bn_rand.c
new file mode 100644
index 00000000..b376c28f
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_rand.c
@@ -0,0 +1,305 @@
+/* crypto/bn/bn_rand.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <stdio.h>
+#include <time.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+#include <openssl/rand.h>
+
+static int bnrand(int pseudorand, BIGNUM *rnd, int bits, int top, int bottom)
+	{
+	unsigned char *buf=NULL;
+	int ret=0,bit,bytes,mask;
+	time_t tim;
+
+	if (bits == 0)
+		{
+		BN_zero(rnd);
+		return 1;
+		}
+
+	bytes=(bits+7)/8;
+	bit=(bits-1)%8;
+	mask=0xff<<(bit+1);
+
+	buf=(unsigned char *)OPENSSL_malloc(bytes);
+	if (buf == NULL)
+		{
+		BNerr(BN_F_BNRAND,ERR_R_MALLOC_FAILURE);
+		goto err;
+		}
+
+	/* make a random number and set the top and bottom bits */
+	time(&tim);
+	RAND_add(&tim,sizeof(tim),0.0);
+
+	if (pseudorand)
+		{
+		if (RAND_pseudo_bytes(buf, bytes) == -1)
+			goto err;
+		}
+	else
+		{
+		if (RAND_bytes(buf, bytes) <= 0)
+			goto err;
+		}
+
+#if 1
+	if (pseudorand == 2)
+		{
+		/* generate patterns that are more likely to trigger BN
+		   library bugs */
+		int i;
+		unsigned char c;
+
+		for (i = 0; i < bytes; i++)
+			{
+			RAND_pseudo_bytes(&c, 1);
+			if (c >= 128 && i > 0)
+				buf[i] = buf[i-1];
+			else if (c < 42)
+				buf[i] = 0;
+			else if (c < 84)
+				buf[i] = 255;
+			}
+		}
+#endif
+
+	if (top != -1)
+		{
+		if (top)
+			{
+			if (bit == 0)
+				{
+				buf[0]=1;
+				buf[1]|=0x80;
+				}
+			else
+				{
+				buf[0]|=(3<<(bit-1));
+				}
+			}
+		else
+			{
+			buf[0]|=(1<<bit);
+			}
+		}
+	buf[0] &= ~mask;
+	if (bottom) /* set bottom bit if requested */
+		buf[bytes-1]|=1;
+	if (!BN_bin2bn(buf,bytes,rnd)) goto err;
+	ret=1;
+err:
+	if (buf != NULL)
+		{
+		OPENSSL_cleanse(buf,bytes);
+		OPENSSL_free(buf);
+		}
+	bn_check_top(rnd);
+	return(ret);
+	}
+
+int     BN_rand(BIGNUM *rnd, int bits, int top, int bottom)
+	{
+	return bnrand(0, rnd, bits, top, bottom);
+	}
+
+int     BN_pseudo_rand(BIGNUM *rnd, int bits, int top, int bottom)
+	{
+	return bnrand(1, rnd, bits, top, bottom);
+	}
+
+#if 1
+int     BN_bntest_rand(BIGNUM *rnd, int bits, int top, int bottom)
+	{
+	return bnrand(2, rnd, bits, top, bottom);
+	}
+#endif
+
+
+/* random number r:  0 <= r < range */
+static int bn_rand_range(int pseudo, BIGNUM *r, const BIGNUM *range)
+	{
+	int (*bn_rand)(BIGNUM *, int, int, int) = pseudo ? BN_pseudo_rand : BN_rand;
+	int n;
+	int count = 100;
+
+	if (range->neg || BN_is_zero(range))
+		{
+		BNerr(BN_F_BN_RAND_RANGE, BN_R_INVALID_RANGE);
+		return 0;
+		}
+
+	n = BN_num_bits(range); /* n > 0 */
+
+	/* BN_is_bit_set(range, n - 1) always holds */
+
+	if (n == 1)
+		BN_zero(r);
+	else if (!BN_is_bit_set(range, n - 2) && !BN_is_bit_set(range, n - 3))
+		{
+		/* range = 100..._2,
+		 * so  3*range (= 11..._2)  is exactly one bit longer than  range */
+		do
+			{
+			if (!bn_rand(r, n + 1, -1, 0)) return 0;
+			/* If  r < 3*range,  use  r := r MOD range
+			 * (which is either  r, r - range,  or  r - 2*range).
+			 * Otherwise, iterate once more.
+			 * Since  3*range = 11..._2, each iteration succeeds with
+			 * probability >= .75. */
+			if (BN_cmp(r ,range) >= 0)
+				{
+				if (!BN_sub(r, r, range)) return 0;
+				if (BN_cmp(r, range) >= 0)
+					if (!BN_sub(r, r, range)) return 0;
+				}
+
+			if (!--count)
+				{
+				BNerr(BN_F_BN_RAND_RANGE, BN_R_TOO_MANY_ITERATIONS);
+				return 0;
+				}
+			
+			}
+		while (BN_cmp(r, range) >= 0);
+		}
+	else
+		{
+		do
+			{
+			/* range = 11..._2  or  range = 101..._2 */
+			if (!bn_rand(r, n, -1, 0)) return 0;
+
+			if (!--count)
+				{
+				BNerr(BN_F_BN_RAND_RANGE, BN_R_TOO_MANY_ITERATIONS);
+				return 0;
+				}
+			}
+		while (BN_cmp(r, range) >= 0);
+		}
+
+	bn_check_top(r);
+	return 1;
+	}
+
+
+int	BN_rand_range(BIGNUM *r, const BIGNUM *range)
+	{
+	return bn_rand_range(0, r, range);
+	}
+
+int	BN_pseudo_rand_range(BIGNUM *r, const BIGNUM *range)
+	{
+	return bn_rand_range(1, r, range);
+	}
diff --git a/app/openssl/crypto/bn/bn_recp.c b/app/openssl/crypto/bn/bn_recp.c
new file mode 100644
index 00000000..2e8efb8d
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_recp.c
@@ -0,0 +1,234 @@
+/* crypto/bn/bn_recp.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+void BN_RECP_CTX_init(BN_RECP_CTX *recp)
+	{
+	BN_init(&(recp->N));
+	BN_init(&(recp->Nr));
+	recp->num_bits=0;
+	recp->flags=0;
+	}
+
+BN_RECP_CTX *BN_RECP_CTX_new(void)
+	{
+	BN_RECP_CTX *ret;
+
+	if ((ret=(BN_RECP_CTX *)OPENSSL_malloc(sizeof(BN_RECP_CTX))) == NULL)
+		return(NULL);
+
+	BN_RECP_CTX_init(ret);
+	ret->flags=BN_FLG_MALLOCED;
+	return(ret);
+	}
+
+void BN_RECP_CTX_free(BN_RECP_CTX *recp)
+	{
+	if(recp == NULL)
+	    return;
+
+	BN_free(&(recp->N));
+	BN_free(&(recp->Nr));
+	if (recp->flags & BN_FLG_MALLOCED)
+		OPENSSL_free(recp);
+	}
+
+int BN_RECP_CTX_set(BN_RECP_CTX *recp, const BIGNUM *d, BN_CTX *ctx)
+	{
+	if (!BN_copy(&(recp->N),d)) return 0;
+	BN_zero(&(recp->Nr));
+	recp->num_bits=BN_num_bits(d);
+	recp->shift=0;
+	return(1);
+	}
+
+int BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y,
+	BN_RECP_CTX *recp, BN_CTX *ctx)
+	{
+	int ret=0;
+	BIGNUM *a;
+	const BIGNUM *ca;
+
+	BN_CTX_start(ctx);
+	if ((a = BN_CTX_get(ctx)) == NULL) goto err;
+	if (y != NULL)
+		{
+		if (x == y)
+			{ if (!BN_sqr(a,x,ctx)) goto err; }
+		else
+			{ if (!BN_mul(a,x,y,ctx)) goto err; }
+		ca = a;
+		}
+	else
+		ca=x; /* Just do the mod */
+
+	ret = BN_div_recp(NULL,r,ca,recp,ctx);
+err:
+	BN_CTX_end(ctx);
+	bn_check_top(r);
+	return(ret);
+	}
+
+int BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m,
+	BN_RECP_CTX *recp, BN_CTX *ctx)
+	{
+	int i,j,ret=0;
+	BIGNUM *a,*b,*d,*r;
+
+	BN_CTX_start(ctx);
+	a=BN_CTX_get(ctx);
+	b=BN_CTX_get(ctx);
+	if (dv != NULL)
+		d=dv;
+	else
+		d=BN_CTX_get(ctx);
+	if (rem != NULL)
+		r=rem;
+	else
+		r=BN_CTX_get(ctx);
+	if (a == NULL || b == NULL || d == NULL || r == NULL) goto err;
+
+	if (BN_ucmp(m,&(recp->N)) < 0)
+		{
+		BN_zero(d);
+		if (!BN_copy(r,m)) return 0;
+		BN_CTX_end(ctx);
+		return(1);
+		}
+
+	/* We want the remainder
+	 * Given input of ABCDEF / ab
+	 * we need multiply ABCDEF by 3 digests of the reciprocal of ab
+	 *
+	 */
+
+	/* i := max(BN_num_bits(m), 2*BN_num_bits(N)) */
+	i=BN_num_bits(m);
+	j=recp->num_bits<<1;
+	if (j>i) i=j;
+
+	/* Nr := round(2^i / N) */
+	if (i != recp->shift)
+		recp->shift=BN_reciprocal(&(recp->Nr),&(recp->N),
+			i,ctx); /* BN_reciprocal returns i, or -1 for an error */
+	if (recp->shift == -1) goto err;
+
+	/* d := |round(round(m / 2^BN_num_bits(N)) * recp->Nr / 2^(i - BN_num_bits(N)))|
+	 *    = |round(round(m / 2^BN_num_bits(N)) * round(2^i / N) / 2^(i - BN_num_bits(N)))|
+	 *   <= |(m / 2^BN_num_bits(N)) * (2^i / N) * (2^BN_num_bits(N) / 2^i)|
+	 *    = |m/N|
+	 */
+	if (!BN_rshift(a,m,recp->num_bits)) goto err;
+	if (!BN_mul(b,a,&(recp->Nr),ctx)) goto err;
+	if (!BN_rshift(d,b,i-recp->num_bits)) goto err;
+	d->neg=0;
+
+	if (!BN_mul(b,&(recp->N),d,ctx)) goto err;
+	if (!BN_usub(r,m,b)) goto err;
+	r->neg=0;
+
+#if 1
+	j=0;
+	while (BN_ucmp(r,&(recp->N)) >= 0)
+		{
+		if (j++ > 2)
+			{
+			BNerr(BN_F_BN_DIV_RECP,BN_R_BAD_RECIPROCAL);
+			goto err;
+			}
+		if (!BN_usub(r,r,&(recp->N))) goto err;
+		if (!BN_add_word(d,1)) goto err;
+		}
+#endif
+
+	r->neg=BN_is_zero(r)?0:m->neg;
+	d->neg=m->neg^recp->N.neg;
+	ret=1;
+err:
+	BN_CTX_end(ctx);
+	bn_check_top(dv);
+	bn_check_top(rem);
+	return(ret);
+	} 
+
+/* len is the expected size of the result
+ * We actually calculate with an extra word of precision, so
+ * we can do faster division if the remainder is not required.
+ */
+/* r := 2^len / m */
+int BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx)
+	{
+	int ret= -1;
+	BIGNUM *t;
+
+	BN_CTX_start(ctx);
+	if((t = BN_CTX_get(ctx)) == NULL) goto err;
+
+	if (!BN_set_bit(t,len)) goto err;
+
+	if (!BN_div(r,NULL,t,m,ctx)) goto err;
+
+	ret=len;
+err:
+	bn_check_top(r);
+	BN_CTX_end(ctx);
+	return(ret);
+	}
diff --git a/app/openssl/crypto/bn/bn_shift.c b/app/openssl/crypto/bn/bn_shift.c
new file mode 100644
index 00000000..c4d301af
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_shift.c
@@ -0,0 +1,220 @@
+/* crypto/bn/bn_shift.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+int BN_lshift1(BIGNUM *r, const BIGNUM *a)
+	{
+	register BN_ULONG *ap,*rp,t,c;
+	int i;
+
+	bn_check_top(r);
+	bn_check_top(a);
+
+	if (r != a)
+		{
+		r->neg=a->neg;
+		if (bn_wexpand(r,a->top+1) == NULL) return(0);
+		r->top=a->top;
+		}
+	else
+		{
+		if (bn_wexpand(r,a->top+1) == NULL) return(0);
+		}
+	ap=a->d;
+	rp=r->d;
+	c=0;
+	for (i=0; i<a->top; i++)
+		{
+		t= *(ap++);
+		*(rp++)=((t<<1)|c)&BN_MASK2;
+		c=(t & BN_TBIT)?1:0;
+		}
+	if (c)
+		{
+		*rp=1;
+		r->top++;
+		}
+	bn_check_top(r);
+	return(1);
+	}
+
+int BN_rshift1(BIGNUM *r, const BIGNUM *a)
+	{
+	BN_ULONG *ap,*rp,t,c;
+	int i;
+
+	bn_check_top(r);
+	bn_check_top(a);
+
+	if (BN_is_zero(a))
+		{
+		BN_zero(r);
+		return(1);
+		}
+	if (a != r)
+		{
+		if (bn_wexpand(r,a->top) == NULL) return(0);
+		r->top=a->top;
+		r->neg=a->neg;
+		}
+	ap=a->d;
+	rp=r->d;
+	c=0;
+	for (i=a->top-1; i>=0; i--)
+		{
+		t=ap[i];
+		rp[i]=((t>>1)&BN_MASK2)|c;
+		c=(t&1)?BN_TBIT:0;
+		}
+	bn_correct_top(r);
+	bn_check_top(r);
+	return(1);
+	}
+
+int BN_lshift(BIGNUM *r, const BIGNUM *a, int n)
+	{
+	int i,nw,lb,rb;
+	BN_ULONG *t,*f;
+	BN_ULONG l;
+
+	bn_check_top(r);
+	bn_check_top(a);
+
+	r->neg=a->neg;
+	nw=n/BN_BITS2;
+	if (bn_wexpand(r,a->top+nw+1) == NULL) return(0);
+	lb=n%BN_BITS2;
+	rb=BN_BITS2-lb;
+	f=a->d;
+	t=r->d;
+	t[a->top+nw]=0;
+	if (lb == 0)
+		for (i=a->top-1; i>=0; i--)
+			t[nw+i]=f[i];
+	else
+		for (i=a->top-1; i>=0; i--)
+			{
+			l=f[i];
+			t[nw+i+1]|=(l>>rb)&BN_MASK2;
+			t[nw+i]=(l<<lb)&BN_MASK2;
+			}
+	memset(t,0,nw*sizeof(t[0]));
+/*	for (i=0; i<nw; i++)
+		t[i]=0;*/
+	r->top=a->top+nw+1;
+	bn_correct_top(r);
+	bn_check_top(r);
+	return(1);
+	}
+
+int BN_rshift(BIGNUM *r, const BIGNUM *a, int n)
+	{
+	int i,j,nw,lb,rb;
+	BN_ULONG *t,*f;
+	BN_ULONG l,tmp;
+
+	bn_check_top(r);
+	bn_check_top(a);
+
+	nw=n/BN_BITS2;
+	rb=n%BN_BITS2;
+	lb=BN_BITS2-rb;
+	if (nw >= a->top || a->top == 0)
+		{
+		BN_zero(r);
+		return(1);
+		}
+	if (r != a)
+		{
+		r->neg=a->neg;
+		if (bn_wexpand(r,a->top-nw+1) == NULL) return(0);
+		}
+	else
+		{
+		if (n == 0)
+			return 1; /* or the copying loop will go berserk */
+		}
+
+	f= &(a->d[nw]);
+	t=r->d;
+	j=a->top-nw;
+	r->top=j;
+
+	if (rb == 0)
+		{
+		for (i=j; i != 0; i--)
+			*(t++)= *(f++);
+		}
+	else
+		{
+		l= *(f++);
+		for (i=j-1; i != 0; i--)
+			{
+			tmp =(l>>rb)&BN_MASK2;
+			l= *(f++);
+			*(t++) =(tmp|(l<<lb))&BN_MASK2;
+			}
+		*(t++) =(l>>rb)&BN_MASK2;
+		}
+	bn_correct_top(r);
+	bn_check_top(r);
+	return(1);
+	}
diff --git a/app/openssl/crypto/bn/bn_sqr.c b/app/openssl/crypto/bn/bn_sqr.c
new file mode 100644
index 00000000..270d0cd3
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_sqr.c
@@ -0,0 +1,294 @@
+/* crypto/bn/bn_sqr.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+/* r must not be a */
+/* I've just gone over this and it is now %20 faster on x86 - eay - 27 Jun 96 */
+int BN_sqr(BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
+	{
+	int max,al;
+	int ret = 0;
+	BIGNUM *tmp,*rr;
+
+#ifdef BN_COUNT
+	fprintf(stderr,"BN_sqr %d * %d\n",a->top,a->top);
+#endif
+	bn_check_top(a);
+
+	al=a->top;
+	if (al <= 0)
+		{
+		r->top=0;
+		return 1;
+		}
+
+	BN_CTX_start(ctx);
+	rr=(a != r) ? r : BN_CTX_get(ctx);
+	tmp=BN_CTX_get(ctx);
+	if (!rr || !tmp) goto err;
+
+	max = 2 * al; /* Non-zero (from above) */
+	if (bn_wexpand(rr,max) == NULL) goto err;
+
+	if (al == 4)
+		{
+#ifndef BN_SQR_COMBA
+		BN_ULONG t[8];
+		bn_sqr_normal(rr->d,a->d,4,t);
+#else
+		bn_sqr_comba4(rr->d,a->d);
+#endif
+		}
+	else if (al == 8)
+		{
+#ifndef BN_SQR_COMBA
+		BN_ULONG t[16];
+		bn_sqr_normal(rr->d,a->d,8,t);
+#else
+		bn_sqr_comba8(rr->d,a->d);
+#endif
+		}
+	else 
+		{
+#if defined(BN_RECURSION)
+		if (al < BN_SQR_RECURSIVE_SIZE_NORMAL)
+			{
+			BN_ULONG t[BN_SQR_RECURSIVE_SIZE_NORMAL*2];
+			bn_sqr_normal(rr->d,a->d,al,t);
+			}
+		else
+			{
+			int j,k;
+
+			j=BN_num_bits_word((BN_ULONG)al);
+			j=1<<(j-1);
+			k=j+j;
+			if (al == j)
+				{
+				if (bn_wexpand(tmp,k*2) == NULL) goto err;
+				bn_sqr_recursive(rr->d,a->d,al,tmp->d);
+				}
+			else
+				{
+				if (bn_wexpand(tmp,max) == NULL) goto err;
+				bn_sqr_normal(rr->d,a->d,al,tmp->d);
+				}
+			}
+#else
+		if (bn_wexpand(tmp,max) == NULL) goto err;
+		bn_sqr_normal(rr->d,a->d,al,tmp->d);
+#endif
+		}
+
+	rr->neg=0;
+	/* If the most-significant half of the top word of 'a' is zero, then
+	 * the square of 'a' will max-1 words. */
+	if(a->d[al - 1] == (a->d[al - 1] & BN_MASK2l))
+		rr->top = max - 1;
+	else
+		rr->top = max;
+	if (rr != r) BN_copy(r,rr);
+	ret = 1;
+ err:
+	bn_check_top(rr);
+	bn_check_top(tmp);
+	BN_CTX_end(ctx);
+	return(ret);
+	}
+
+/* tmp must have 2*n words */
+void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp)
+	{
+	int i,j,max;
+	const BN_ULONG *ap;
+	BN_ULONG *rp;
+
+	max=n*2;
+	ap=a;
+	rp=r;
+	rp[0]=rp[max-1]=0;
+	rp++;
+	j=n;
+
+	if (--j > 0)
+		{
+		ap++;
+		rp[j]=bn_mul_words(rp,ap,j,ap[-1]);
+		rp+=2;
+		}
+
+	for (i=n-2; i>0; i--)
+		{
+		j--;
+		ap++;
+		rp[j]=bn_mul_add_words(rp,ap,j,ap[-1]);
+		rp+=2;
+		}
+
+	bn_add_words(r,r,r,max);
+
+	/* There will not be a carry */
+
+	bn_sqr_words(tmp,a,n);
+
+	bn_add_words(r,r,tmp,max);
+	}
+
+#ifdef BN_RECURSION
+/* r is 2*n words in size,
+ * a and b are both n words in size.    (There's not actually a 'b' here ...)
+ * n must be a power of 2.
+ * We multiply and return the result.
+ * t must be 2*n words in size
+ * We calculate
+ * a[0]*b[0]
+ * a[0]*b[0]+a[1]*b[1]+(a[0]-a[1])*(b[1]-b[0])
+ * a[1]*b[1]
+ */
+void bn_sqr_recursive(BN_ULONG *r, const BN_ULONG *a, int n2, BN_ULONG *t)
+	{
+	int n=n2/2;
+	int zero,c1;
+	BN_ULONG ln,lo,*p;
+
+#ifdef BN_COUNT
+	fprintf(stderr," bn_sqr_recursive %d * %d\n",n2,n2);
+#endif
+	if (n2 == 4)
+		{
+#ifndef BN_SQR_COMBA
+		bn_sqr_normal(r,a,4,t);
+#else
+		bn_sqr_comba4(r,a);
+#endif
+		return;
+		}
+	else if (n2 == 8)
+		{
+#ifndef BN_SQR_COMBA
+		bn_sqr_normal(r,a,8,t);
+#else
+		bn_sqr_comba8(r,a);
+#endif
+		return;
+		}
+	if (n2 < BN_SQR_RECURSIVE_SIZE_NORMAL)
+		{
+		bn_sqr_normal(r,a,n2,t);
+		return;
+		}
+	/* r=(a[0]-a[1])*(a[1]-a[0]) */
+	c1=bn_cmp_words(a,&(a[n]),n);
+	zero=0;
+	if (c1 > 0)
+		bn_sub_words(t,a,&(a[n]),n);
+	else if (c1 < 0)
+		bn_sub_words(t,&(a[n]),a,n);
+	else
+		zero=1;
+
+	/* The result will always be negative unless it is zero */
+	p= &(t[n2*2]);
+
+	if (!zero)
+		bn_sqr_recursive(&(t[n2]),t,n,p);
+	else
+		memset(&(t[n2]),0,n2*sizeof(BN_ULONG));
+	bn_sqr_recursive(r,a,n,p);
+	bn_sqr_recursive(&(r[n2]),&(a[n]),n,p);
+
+	/* t[32] holds (a[0]-a[1])*(a[1]-a[0]), it is negative or zero
+	 * r[10] holds (a[0]*b[0])
+	 * r[32] holds (b[1]*b[1])
+	 */
+
+	c1=(int)(bn_add_words(t,r,&(r[n2]),n2));
+
+	/* t[32] is negative */
+	c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2));
+
+	/* t[32] holds (a[0]-a[1])*(a[1]-a[0])+(a[0]*a[0])+(a[1]*a[1])
+	 * r[10] holds (a[0]*a[0])
+	 * r[32] holds (a[1]*a[1])
+	 * c1 holds the carry bits
+	 */
+	c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2));
+	if (c1)
+		{
+		p= &(r[n+n2]);
+		lo= *p;
+		ln=(lo+c1)&BN_MASK2;
+		*p=ln;
+
+		/* The overflow will stop before we over write
+		 * words we should not overwrite */
+		if (ln < (BN_ULONG)c1)
+			{
+			do	{
+				p++;
+				lo= *p;
+				ln=(lo+1)&BN_MASK2;
+				*p=ln;
+				} while (ln == 0);
+			}
+		}
+	}
+#endif
diff --git a/app/openssl/crypto/bn/bn_sqrt.c b/app/openssl/crypto/bn/bn_sqrt.c
new file mode 100644
index 00000000..6beaf9e5
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_sqrt.c
@@ -0,0 +1,393 @@
+/* crypto/bn/bn_sqrt.c */
+/* Written by Lenka Fibikova <fibikova@exp-math.uni-essen.de>
+ * and Bodo Moeller for the OpenSSL project. */
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+
+BIGNUM *BN_mod_sqrt(BIGNUM *in, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) 
+/* Returns 'ret' such that
+ *      ret^2 == a (mod p),
+ * using the Tonelli/Shanks algorithm (cf. Henri Cohen, "A Course
+ * in Algebraic Computational Number Theory", algorithm 1.5.1).
+ * 'p' must be prime!
+ */
+	{
+	BIGNUM *ret = in;
+	int err = 1;
+	int r;
+	BIGNUM *A, *b, *q, *t, *x, *y;
+	int e, i, j;
+	
+	if (!BN_is_odd(p) || BN_abs_is_word(p, 1))
+		{
+		if (BN_abs_is_word(p, 2))
+			{
+			if (ret == NULL)
+				ret = BN_new();
+			if (ret == NULL)
+				goto end;
+			if (!BN_set_word(ret, BN_is_bit_set(a, 0)))
+				{
+				if (ret != in)
+					BN_free(ret);
+				return NULL;
+				}
+			bn_check_top(ret);
+			return ret;
+			}
+
+		BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME);
+		return(NULL);
+		}
+
+	if (BN_is_zero(a) || BN_is_one(a))
+		{
+		if (ret == NULL)
+			ret = BN_new();
+		if (ret == NULL)
+			goto end;
+		if (!BN_set_word(ret, BN_is_one(a)))
+			{
+			if (ret != in)
+				BN_free(ret);
+			return NULL;
+			}
+		bn_check_top(ret);
+		return ret;
+		}
+
+	BN_CTX_start(ctx);
+	A = BN_CTX_get(ctx);
+	b = BN_CTX_get(ctx);
+	q = BN_CTX_get(ctx);
+	t = BN_CTX_get(ctx);
+	x = BN_CTX_get(ctx);
+	y = BN_CTX_get(ctx);
+	if (y == NULL) goto end;
+	
+	if (ret == NULL)
+		ret = BN_new();
+	if (ret == NULL) goto end;
+
+	/* A = a mod p */
+	if (!BN_nnmod(A, a, p, ctx)) goto end;
+
+	/* now write  |p| - 1  as  2^e*q  where  q  is odd */
+	e = 1;
+	while (!BN_is_bit_set(p, e))
+		e++;
+	/* we'll set  q  later (if needed) */
+
+	if (e == 1)
+		{
+		/* The easy case:  (|p|-1)/2  is odd, so 2 has an inverse
+		 * modulo  (|p|-1)/2,  and square roots can be computed
+		 * directly by modular exponentiation.
+		 * We have
+		 *     2 * (|p|+1)/4 == 1   (mod (|p|-1)/2),
+		 * so we can use exponent  (|p|+1)/4,  i.e.  (|p|-3)/4 + 1.
+		 */
+		if (!BN_rshift(q, p, 2)) goto end;
+		q->neg = 0;
+		if (!BN_add_word(q, 1)) goto end;
+		if (!BN_mod_exp(ret, A, q, p, ctx)) goto end;
+		err = 0;
+		goto vrfy;
+		}
+	
+	if (e == 2)
+		{
+		/* |p| == 5  (mod 8)
+		 *
+		 * In this case  2  is always a non-square since
+		 * Legendre(2,p) = (-1)^((p^2-1)/8)  for any odd prime.
+		 * So if  a  really is a square, then  2*a  is a non-square.
+		 * Thus for
+		 *      b := (2*a)^((|p|-5)/8),
+		 *      i := (2*a)*b^2
+		 * we have
+		 *     i^2 = (2*a)^((1 + (|p|-5)/4)*2)
+		 *         = (2*a)^((p-1)/2)
+		 *         = -1;
+		 * so if we set
+		 *      x := a*b*(i-1),
+		 * then
+		 *     x^2 = a^2 * b^2 * (i^2 - 2*i + 1)
+		 *         = a^2 * b^2 * (-2*i)
+		 *         = a*(-i)*(2*a*b^2)
+		 *         = a*(-i)*i
+		 *         = a.
+		 *
+		 * (This is due to A.O.L. Atkin, 
+		 * <URL: http://listserv.nodak.edu/scripts/wa.exe?A2=ind9211&L=nmbrthry&O=T&P=562>,
+		 * November 1992.)
+		 */
+
+		/* t := 2*a */
+		if (!BN_mod_lshift1_quick(t, A, p)) goto end;
+
+		/* b := (2*a)^((|p|-5)/8) */
+		if (!BN_rshift(q, p, 3)) goto end;
+		q->neg = 0;
+		if (!BN_mod_exp(b, t, q, p, ctx)) goto end;
+
+		/* y := b^2 */
+		if (!BN_mod_sqr(y, b, p, ctx)) goto end;
+
+		/* t := (2*a)*b^2 - 1*/
+		if (!BN_mod_mul(t, t, y, p, ctx)) goto end;
+		if (!BN_sub_word(t, 1)) goto end;
+
+		/* x = a*b*t */
+		if (!BN_mod_mul(x, A, b, p, ctx)) goto end;
+		if (!BN_mod_mul(x, x, t, p, ctx)) goto end;
+
+		if (!BN_copy(ret, x)) goto end;
+		err = 0;
+		goto vrfy;
+		}
+	
+	/* e > 2, so we really have to use the Tonelli/Shanks algorithm.
+	 * First, find some  y  that is not a square. */
+	if (!BN_copy(q, p)) goto end; /* use 'q' as temp */
+	q->neg = 0;
+	i = 2;
+	do
+		{
+		/* For efficiency, try small numbers first;
+		 * if this fails, try random numbers.
+		 */
+		if (i < 22)
+			{
+			if (!BN_set_word(y, i)) goto end;
+			}
+		else
+			{
+			if (!BN_pseudo_rand(y, BN_num_bits(p), 0, 0)) goto end;
+			if (BN_ucmp(y, p) >= 0)
+				{
+				if (!(p->neg ? BN_add : BN_sub)(y, y, p)) goto end;
+				}
+			/* now 0 <= y < |p| */
+			if (BN_is_zero(y))
+				if (!BN_set_word(y, i)) goto end;
+			}
+		
+		r = BN_kronecker(y, q, ctx); /* here 'q' is |p| */
+		if (r < -1) goto end;
+		if (r == 0)
+			{
+			/* m divides p */
+			BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME);
+			goto end;
+			}
+		}
+	while (r == 1 && ++i < 82);
+	
+	if (r != -1)
+		{
+		/* Many rounds and still no non-square -- this is more likely
+		 * a bug than just bad luck.
+		 * Even if  p  is not prime, we should have found some  y
+		 * such that r == -1.
+		 */
+		BNerr(BN_F_BN_MOD_SQRT, BN_R_TOO_MANY_ITERATIONS);
+		goto end;
+		}
+
+	/* Here's our actual 'q': */
+	if (!BN_rshift(q, q, e)) goto end;
+
+	/* Now that we have some non-square, we can find an element
+	 * of order  2^e  by computing its q'th power. */
+	if (!BN_mod_exp(y, y, q, p, ctx)) goto end;
+	if (BN_is_one(y))
+		{
+		BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME);
+		goto end;
+		}
+
+	/* Now we know that (if  p  is indeed prime) there is an integer
+	 * k,  0 <= k < 2^e,  such that
+	 *
+	 *      a^q * y^k == 1   (mod p).
+	 *
+	 * As  a^q  is a square and  y  is not,  k  must be even.
+	 * q+1  is even, too, so there is an element
+	 *
+	 *     X := a^((q+1)/2) * y^(k/2),
+	 *
+	 * and it satisfies
+	 *
+	 *     X^2 = a^q * a     * y^k
+	 *         = a,
+	 *
+	 * so it is the square root that we are looking for.
+	 */
+	
+	/* t := (q-1)/2  (note that  q  is odd) */
+	if (!BN_rshift1(t, q)) goto end;
+	
+	/* x := a^((q-1)/2) */
+	if (BN_is_zero(t)) /* special case: p = 2^e + 1 */
+		{
+		if (!BN_nnmod(t, A, p, ctx)) goto end;
+		if (BN_is_zero(t))
+			{
+			/* special case: a == 0  (mod p) */
+			BN_zero(ret);
+			err = 0;
+			goto end;
+			}
+		else
+			if (!BN_one(x)) goto end;
+		}
+	else
+		{
+		if (!BN_mod_exp(x, A, t, p, ctx)) goto end;
+		if (BN_is_zero(x))
+			{
+			/* special case: a == 0  (mod p) */
+			BN_zero(ret);
+			err = 0;
+			goto end;
+			}
+		}
+
+	/* b := a*x^2  (= a^q) */
+	if (!BN_mod_sqr(b, x, p, ctx)) goto end;
+	if (!BN_mod_mul(b, b, A, p, ctx)) goto end;
+	
+	/* x := a*x    (= a^((q+1)/2)) */
+	if (!BN_mod_mul(x, x, A, p, ctx)) goto end;
+
+	while (1)
+		{
+		/* Now  b  is  a^q * y^k  for some even  k  (0 <= k < 2^E
+		 * where  E  refers to the original value of  e,  which we
+		 * don't keep in a variable),  and  x  is  a^((q+1)/2) * y^(k/2).
+		 *
+		 * We have  a*b = x^2,
+		 *    y^2^(e-1) = -1,
+		 *    b^2^(e-1) = 1.
+		 */
+
+		if (BN_is_one(b))
+			{
+			if (!BN_copy(ret, x)) goto end;
+			err = 0;
+			goto vrfy;
+			}
+
+
+		/* find smallest  i  such that  b^(2^i) = 1 */
+		i = 1;
+		if (!BN_mod_sqr(t, b, p, ctx)) goto end;
+		while (!BN_is_one(t))
+			{
+			i++;
+			if (i == e)
+				{
+				BNerr(BN_F_BN_MOD_SQRT, BN_R_NOT_A_SQUARE);
+				goto end;
+				}
+			if (!BN_mod_mul(t, t, t, p, ctx)) goto end;
+			}
+		
+
+		/* t := y^2^(e - i - 1) */
+		if (!BN_copy(t, y)) goto end;
+		for (j = e - i - 1; j > 0; j--)
+			{
+			if (!BN_mod_sqr(t, t, p, ctx)) goto end;
+			}
+		if (!BN_mod_mul(y, t, t, p, ctx)) goto end;
+		if (!BN_mod_mul(x, x, t, p, ctx)) goto end;
+		if (!BN_mod_mul(b, b, y, p, ctx)) goto end;
+		e = i;
+		}
+
+ vrfy:
+	if (!err)
+		{
+		/* verify the result -- the input might have been not a square
+		 * (test added in 0.9.8) */
+		
+		if (!BN_mod_sqr(x, ret, p, ctx))
+			err = 1;
+		
+		if (!err && 0 != BN_cmp(x, A))
+			{
+			BNerr(BN_F_BN_MOD_SQRT, BN_R_NOT_A_SQUARE);
+			err = 1;
+			}
+		}
+
+ end:
+	if (err)
+		{
+		if (ret != NULL && ret != in)
+			{
+			BN_clear_free(ret);
+			}
+		ret = NULL;
+		}
+	BN_CTX_end(ctx);
+	bn_check_top(ret);
+	return ret;
+	}
diff --git a/app/openssl/crypto/bn/bn_word.c b/app/openssl/crypto/bn/bn_word.c
new file mode 100644
index 00000000..ee7b87c4
--- /dev/null
+++ b/app/openssl/crypto/bn/bn_word.c
@@ -0,0 +1,247 @@
+/* crypto/bn/bn_word.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "cryptlib.h"
+#include "bn_lcl.h"
+
+BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w)
+	{
+#ifndef BN_LLONG
+	BN_ULONG ret=0;
+#else
+	BN_ULLONG ret=0;
+#endif
+	int i;
+
+	if (w == 0)
+		return (BN_ULONG)-1;
+
+	bn_check_top(a);
+	w&=BN_MASK2;
+	for (i=a->top-1; i>=0; i--)
+		{
+#ifndef BN_LLONG
+		ret=((ret<<BN_BITS4)|((a->d[i]>>BN_BITS4)&BN_MASK2l))%w;
+		ret=((ret<<BN_BITS4)|(a->d[i]&BN_MASK2l))%w;
+#else
+		ret=(BN_ULLONG)(((ret<<(BN_ULLONG)BN_BITS2)|a->d[i])%
+			(BN_ULLONG)w);
+#endif
+		}
+	return((BN_ULONG)ret);
+	}
+
+BN_ULONG BN_div_word(BIGNUM *a, BN_ULONG w)
+	{
+	BN_ULONG ret = 0;
+	int i, j;
+
+	bn_check_top(a);
+	w &= BN_MASK2;
+
+	if (!w)
+		/* actually this an error (division by zero) */
+		return (BN_ULONG)-1;
+	if (a->top == 0)
+		return 0;
+
+	/* normalize input (so bn_div_words doesn't complain) */
+	j = BN_BITS2 - BN_num_bits_word(w);
+	w <<= j;
+	if (!BN_lshift(a, a, j))
+		return (BN_ULONG)-1;
+
+	for (i=a->top-1; i>=0; i--)
+		{
+		BN_ULONG l,d;
+		
+		l=a->d[i];
+		d=bn_div_words(ret,l,w);
+		ret=(l-((d*w)&BN_MASK2))&BN_MASK2;
+		a->d[i]=d;
+		}
+	if ((a->top > 0) && (a->d[a->top-1] == 0))
+		a->top--;
+	ret >>= j;
+	bn_check_top(a);
+	return(ret);
+	}
+
+int BN_add_word(BIGNUM *a, BN_ULONG w)
+	{
+	BN_ULONG l;
+	int i;
+
+	bn_check_top(a);
+	w &= BN_MASK2;
+
+	/* degenerate case: w is zero */
+	if (!w) return 1;
+	/* degenerate case: a is zero */
+	if(BN_is_zero(a)) return BN_set_word(a, w);
+	/* handle 'a' when negative */
+	if (a->neg)
+		{
+		a->neg=0;
+		i=BN_sub_word(a,w);
+		if (!BN_is_zero(a))
+			a->neg=!(a->neg);
+		return(i);
+		}
+	/* Only expand (and risk failing) if it's possibly necessary */
+	if (((BN_ULONG)(a->d[a->top - 1] + 1) == 0) &&
+			(bn_wexpand(a,a->top+1) == NULL))
+		return(0);
+	i=0;
+	for (;;)
+		{
+		if (i >= a->top)
+			l=w;
+		else
+			l=(a->d[i]+w)&BN_MASK2;
+		a->d[i]=l;
+		if (w > l)
+			w=1;
+		else
+			break;
+		i++;
+		}
+	if (i >= a->top)
+		a->top++;
+	bn_check_top(a);
+	return(1);
+	}
+
+int BN_sub_word(BIGNUM *a, BN_ULONG w)
+	{
+	int i;
+
+	bn_check_top(a);
+	w &= BN_MASK2;
+
+	/* degenerate case: w is zero */
+	if (!w) return 1;
+	/* degenerate case: a is zero */
+	if(BN_is_zero(a))
+		{
+		i = BN_set_word(a,w);
+		if (i != 0)
+			BN_set_negative(a, 1);
+		return i;
+		}
+	/* handle 'a' when negative */
+	if (a->neg)
+		{
+		a->neg=0;
+		i=BN_add_word(a,w);
+		a->neg=1;
+		return(i);
+		}
+
+	if ((a->top == 1) && (a->d[0] < w))
+		{
+		a->d[0]=w-a->d[0];
+		a->neg=1;
+		return(1);
+		}
+	i=0;
+	for (;;)
+		{
+		if (a->d[i] >= w)
+			{
+			a->d[i]-=w;
+			break;
+			}
+		else
+			{
+			a->d[i]=(a->d[i]-w)&BN_MASK2;
+			i++;
+			w=1;
+			}
+		}
+	if ((a->d[i] == 0) && (i == (a->top-1)))
+		a->top--;
+	bn_check_top(a);
+	return(1);
+	}
+
+int BN_mul_word(BIGNUM *a, BN_ULONG w)
+	{
+	BN_ULONG ll;
+
+	bn_check_top(a);
+	w&=BN_MASK2;
+	if (a->top)
+		{
+		if (w == 0)
+			BN_zero(a);
+		else
+			{
+			ll=bn_mul_words(a->d,a->d,a->top,w);
+			if (ll)
+				{
+				if (bn_wexpand(a,a->top+1) == NULL) return(0);
+				a->d[a->top++]=ll;
+				}
+			}
+		}
+	bn_check_top(a);
+	return(1);
+	}
+
diff --git a/app/openssl/crypto/bn/bnspeed.c b/app/openssl/crypto/bn/bnspeed.c
new file mode 100644
index 00000000..b554ac8c
--- /dev/null
+++ b/app/openssl/crypto/bn/bnspeed.c
@@ -0,0 +1,233 @@
+/* unused */
+
+/* crypto/bn/bnspeed.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+/* most of this code has been pilfered from my libdes speed.c program */
+
+#define BASENUM	1000000
+#undef PROG
+#define PROG bnspeed_main
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <string.h>
+#include <openssl/crypto.h>
+#include <openssl/err.h>
+
+#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
+#define TIMES
+#endif
+
+#ifndef _IRIX
+#include <time.h>
+#endif
+#ifdef TIMES
+#include <sys/types.h>
+#include <sys/times.h>
+#endif
+
+/* Depending on the VMS version, the tms structure is perhaps defined.
+   The __TMS macro will show if it was.  If it wasn't defined, we should
+   undefine TIMES, since that tells the rest of the program how things
+   should be handled.				-- Richard Levitte */
+#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
+#undef TIMES
+#endif
+
+#ifndef TIMES
+#include <sys/timeb.h>
+#endif
+
+#if defined(sun) || defined(__ultrix)
+#define _POSIX_SOURCE
+#include <limits.h>
+#include <sys/param.h>
+#endif
+
+#include <openssl/bn.h>
+#include <openssl/x509.h>
+
+/* The following if from times(3) man page.  It may need to be changed */
+#ifndef HZ
+# ifndef CLK_TCK
+#  ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
+#   define HZ	100.0
+#  else /* _BSD_CLK_TCK_ */
+#   define HZ ((double)_BSD_CLK_TCK_)
+#  endif
+# else /* CLK_TCK */
+#  define HZ ((double)CLK_TCK)
+# endif
+#endif
+
+#undef BUFSIZE
+#define BUFSIZE	((long)1024*8)
+int run=0;
+
+static double Time_F(int s);
+#define START	0
+#define STOP	1
+
+static double Time_F(int s)
+	{
+	double ret;
+#ifdef TIMES
+	static struct tms tstart,tend;
+
+	if (s == START)
+		{
+		times(&tstart);
+		return(0);
+		}
+	else
+		{
+		times(&tend);
+		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
+		return((ret < 1e-3)?1e-3:ret);
+		}
+#else /* !times() */
+	static struct timeb tstart,tend;
+	long i;
+
+	if (s == START)
+		{
+		ftime(&tstart);
+		return(0);
+		}
+	else
+		{
+		ftime(&tend);
+		i=(long)tend.millitm-(long)tstart.millitm;
+		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
+		return((ret < 0.001)?0.001:ret);
+		}
+#endif
+	}
+
+#define NUM_SIZES	5
+static int sizes[NUM_SIZES]={128,256,512,1024,2048};
+/*static int sizes[NUM_SIZES]={59,179,299,419,539}; */
+
+void do_mul(BIGNUM *r,BIGNUM *a,BIGNUM *b,BN_CTX *ctx); 
+
+int main(int argc, char **argv)
+	{
+	BN_CTX *ctx;
+	BIGNUM a,b,c;
+
+	ctx=BN_CTX_new();
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+
+	do_mul(&a,&b,&c,ctx);
+	}
+
+void do_mul(BIGNUM *r, BIGNUM *a, BIGNUM *b, BN_CTX *ctx)
+	{
+	int i,j,k;
+	double tm;
+	long num;
+
+	for (i=0; i<NUM_SIZES; i++)
+		{
+		num=BASENUM;
+		if (i) num/=(i*3);
+		BN_rand(a,sizes[i],1,0);
+		for (j=i; j<NUM_SIZES; j++)
+			{
+			BN_rand(b,sizes[j],1,0);
+			Time_F(START);
+			for (k=0; k<num; k++)
+				BN_mul(r,b,a,ctx);
+			tm=Time_F(STOP);
+			printf("mul %4d x %4d -> %8.3fms\n",sizes[i],sizes[j],tm*1000.0/num);
+			}
+		}
+
+	for (i=0; i<NUM_SIZES; i++)
+		{
+		num=BASENUM;
+		if (i) num/=(i*3);
+		BN_rand(a,sizes[i],1,0);
+		Time_F(START);
+		for (k=0; k<num; k++)
+			BN_sqr(r,a,ctx);
+		tm=Time_F(STOP);
+		printf("sqr %4d x %4d -> %8.3fms\n",sizes[i],sizes[i],tm*1000.0/num);
+		}
+
+	for (i=0; i<NUM_SIZES; i++)
+		{
+		num=BASENUM/10;
+		if (i) num/=(i*3);
+		BN_rand(a,sizes[i]-1,1,0);
+		for (j=i; j<NUM_SIZES; j++)
+			{
+			BN_rand(b,sizes[j],1,0);
+			Time_F(START);
+			for (k=0; k<100000; k++)
+				BN_div(r, NULL, b, a,ctx);
+			tm=Time_F(STOP);
+			printf("div %4d / %4d -> %8.3fms\n",sizes[j],sizes[i]-1,tm*1000.0/num);
+			}
+		}
+	}
+
diff --git a/app/openssl/crypto/bn/bntest.c b/app/openssl/crypto/bn/bntest.c
new file mode 100644
index 00000000..0cd99c5b
--- /dev/null
+++ b/app/openssl/crypto/bn/bntest.c
@@ -0,0 +1,2013 @@
+/* crypto/bn/bntest.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ *
+ * Portions of the attached software ("Contribution") are developed by 
+ * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
+ *
+ * The Contribution is licensed pursuant to the Eric Young open source
+ * license provided above.
+ *
+ * The binary polynomial arithmetic software is originally written by 
+ * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
+ *
+ */
+
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "e_os.h"
+
+#include <openssl/bio.h>
+#include <openssl/bn.h>
+#include <openssl/rand.h>
+#include <openssl/x509.h>
+#include <openssl/err.h>
+
+const int num0 = 100; /* number of tests */
+const int num1 = 50;  /* additional tests for some functions */
+const int num2 = 5;   /* number of tests for slow functions */
+
+int test_add(BIO *bp);
+int test_sub(BIO *bp);
+int test_lshift1(BIO *bp);
+int test_lshift(BIO *bp,BN_CTX *ctx,BIGNUM *a_);
+int test_rshift1(BIO *bp);
+int test_rshift(BIO *bp,BN_CTX *ctx);
+int test_div(BIO *bp,BN_CTX *ctx);
+int test_div_word(BIO *bp);
+int test_div_recp(BIO *bp,BN_CTX *ctx);
+int test_mul(BIO *bp);
+int test_sqr(BIO *bp,BN_CTX *ctx);
+int test_mont(BIO *bp,BN_CTX *ctx);
+int test_mod(BIO *bp,BN_CTX *ctx);
+int test_mod_mul(BIO *bp,BN_CTX *ctx);
+int test_mod_exp(BIO *bp,BN_CTX *ctx);
+int test_mod_exp_mont_consttime(BIO *bp,BN_CTX *ctx);
+int test_exp(BIO *bp,BN_CTX *ctx);
+int test_gf2m_add(BIO *bp);
+int test_gf2m_mod(BIO *bp);
+int test_gf2m_mod_mul(BIO *bp,BN_CTX *ctx);
+int test_gf2m_mod_sqr(BIO *bp,BN_CTX *ctx);
+int test_gf2m_mod_inv(BIO *bp,BN_CTX *ctx);
+int test_gf2m_mod_div(BIO *bp,BN_CTX *ctx);
+int test_gf2m_mod_exp(BIO *bp,BN_CTX *ctx);
+int test_gf2m_mod_sqrt(BIO *bp,BN_CTX *ctx);
+int test_gf2m_mod_solve_quad(BIO *bp,BN_CTX *ctx);
+int test_kron(BIO *bp,BN_CTX *ctx);
+int test_sqrt(BIO *bp,BN_CTX *ctx);
+int rand_neg(void);
+static int results=0;
+
+static unsigned char lst[]="\xC6\x4F\x43\x04\x2A\xEA\xCA\x6E\x58\x36\x80\x5B\xE8\xC9"
+"\x9B\x04\x5D\x48\x36\xC2\xFD\x16\xC9\x64\xF0";
+
+static const char rnd_seed[] = "string to make the random number generator think it has entropy";
+
+static void message(BIO *out, char *m)
+	{
+	fprintf(stderr, "test %s\n", m);
+	BIO_puts(out, "print \"test ");
+	BIO_puts(out, m);
+	BIO_puts(out, "\\n\"\n");
+	}
+
+int main(int argc, char *argv[])
+	{
+	BN_CTX *ctx;
+	BIO *out;
+	char *outfile=NULL;
+
+	results = 0;
+
+	RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_generate_prime may fail */
+
+	argc--;
+	argv++;
+	while (argc >= 1)
+		{
+		if (strcmp(*argv,"-results") == 0)
+			results=1;
+		else if (strcmp(*argv,"-out") == 0)
+			{
+			if (--argc < 1) break;
+			outfile= *(++argv);
+			}
+		argc--;
+		argv++;
+		}
+
+
+	ctx=BN_CTX_new();
+	if (ctx == NULL) EXIT(1);
+
+	out=BIO_new(BIO_s_file());
+	if (out == NULL) EXIT(1);
+	if (outfile == NULL)
+		{
+		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+		}
+	else
+		{
+		if (!BIO_write_filename(out,outfile))
+			{
+			perror(outfile);
+			EXIT(1);
+			}
+		}
+
+	if (!results)
+		BIO_puts(out,"obase=16\nibase=16\n");
+
+	message(out,"BN_add");
+	if (!test_add(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_sub");
+	if (!test_sub(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_lshift1");
+	if (!test_lshift1(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_lshift (fixed)");
+	if (!test_lshift(out,ctx,BN_bin2bn(lst,sizeof(lst)-1,NULL)))
+	    goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_lshift");
+	if (!test_lshift(out,ctx,NULL)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_rshift1");
+	if (!test_rshift1(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_rshift");
+	if (!test_rshift(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_sqr");
+	if (!test_sqr(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_mul");
+	if (!test_mul(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_div");
+	if (!test_div(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_div_word");
+	if (!test_div_word(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_div_recp");
+	if (!test_div_recp(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_mod");
+	if (!test_mod(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_mod_mul");
+	if (!test_mod_mul(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_mont");
+	if (!test_mont(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_mod_exp");
+	if (!test_mod_exp(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_mod_exp_mont_consttime");
+	if (!test_mod_exp_mont_consttime(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_exp");
+	if (!test_exp(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_kronecker");
+	if (!test_kron(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_mod_sqrt");
+	if (!test_sqrt(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_add");
+	if (!test_gf2m_add(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod");
+	if (!test_gf2m_mod(out)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod_mul");
+	if (!test_gf2m_mod_mul(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod_sqr");
+	if (!test_gf2m_mod_sqr(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod_inv");
+	if (!test_gf2m_mod_inv(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod_div");
+	if (!test_gf2m_mod_div(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod_exp");
+	if (!test_gf2m_mod_exp(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod_sqrt");
+	if (!test_gf2m_mod_sqrt(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	message(out,"BN_GF2m_mod_solve_quad");
+	if (!test_gf2m_mod_solve_quad(out,ctx)) goto err;
+	(void)BIO_flush(out);
+
+	BN_CTX_free(ctx);
+	BIO_free(out);
+
+/**/
+	EXIT(0);
+err:
+	BIO_puts(out,"1\n"); /* make sure the Perl script fed by bc notices
+	                      * the failure, see test_bn in test/Makefile.ssl*/
+	(void)BIO_flush(out);
+	ERR_load_crypto_strings();
+	ERR_print_errors_fp(stderr);
+	EXIT(1);
+	return(1);
+	}
+
+int test_add(BIO *bp)
+	{
+	BIGNUM a,b,c;
+	int i;
+
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+
+	BN_bntest_rand(&a,512,0,0);
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(&b,450+i,0,0);
+		a.neg=rand_neg();
+		b.neg=rand_neg();
+		BN_add(&c,&a,&b);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," + ");
+				BN_print(bp,&b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&c);
+			BIO_puts(bp,"\n");
+			}
+		a.neg=!a.neg;
+		b.neg=!b.neg;
+		BN_add(&c,&c,&b);
+		BN_add(&c,&c,&a);
+		if(!BN_is_zero(&c))
+		    {
+		    fprintf(stderr,"Add test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(&a);
+	BN_free(&b);
+	BN_free(&c);
+	return(1);
+	}
+
+int test_sub(BIO *bp)
+	{
+	BIGNUM a,b,c;
+	int i;
+
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+
+	for (i=0; i<num0+num1; i++)
+		{
+		if (i < num1)
+			{
+			BN_bntest_rand(&a,512,0,0);
+			BN_copy(&b,&a);
+			if (BN_set_bit(&a,i)==0) return(0);
+			BN_add_word(&b,i);
+			}
+		else
+			{
+			BN_bntest_rand(&b,400+i-num1,0,0);
+			a.neg=rand_neg();
+			b.neg=rand_neg();
+			}
+		BN_sub(&c,&a,&b);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," - ");
+				BN_print(bp,&b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&c);
+			BIO_puts(bp,"\n");
+			}
+		BN_add(&c,&c,&b);
+		BN_sub(&c,&c,&a);
+		if(!BN_is_zero(&c))
+		    {
+		    fprintf(stderr,"Subtract test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(&a);
+	BN_free(&b);
+	BN_free(&c);
+	return(1);
+	}
+
+int test_div(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM a,b,c,d,e;
+	int i;
+
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+	BN_init(&d);
+	BN_init(&e);
+
+	for (i=0; i<num0+num1; i++)
+		{
+		if (i < num1)
+			{
+			BN_bntest_rand(&a,400,0,0);
+			BN_copy(&b,&a);
+			BN_lshift(&a,&a,i);
+			BN_add_word(&a,i);
+			}
+		else
+			BN_bntest_rand(&b,50+3*(i-num1),0,0);
+		a.neg=rand_neg();
+		b.neg=rand_neg();
+		BN_div(&d,&c,&a,&b,ctx);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," / ");
+				BN_print(bp,&b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&d);
+			BIO_puts(bp,"\n");
+
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," % ");
+				BN_print(bp,&b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&c);
+			BIO_puts(bp,"\n");
+			}
+		BN_mul(&e,&d,&b,ctx);
+		BN_add(&d,&e,&c);
+		BN_sub(&d,&d,&a);
+		if(!BN_is_zero(&d))
+		    {
+		    fprintf(stderr,"Division test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(&a);
+	BN_free(&b);
+	BN_free(&c);
+	BN_free(&d);
+	BN_free(&e);
+	return(1);
+	}
+
+static void print_word(BIO *bp,BN_ULONG w)
+	{
+#ifdef SIXTY_FOUR_BIT
+	if (sizeof(w) > sizeof(unsigned long))
+		{
+		unsigned long	h=(unsigned long)(w>>32),
+				l=(unsigned long)(w);
+
+		if (h)	BIO_printf(bp,"%lX%08lX",h,l);
+		else	BIO_printf(bp,"%lX",l);
+		return;
+		}
+#endif
+	BIO_printf(bp,BN_HEX_FMT1,w);
+	}
+
+int test_div_word(BIO *bp)
+	{
+	BIGNUM   a,b;
+	BN_ULONG r,s;
+	int i;
+
+	BN_init(&a);
+	BN_init(&b);
+
+	for (i=0; i<num0; i++)
+		{
+		do {
+			BN_bntest_rand(&a,512,-1,0);
+			BN_bntest_rand(&b,BN_BITS2,-1,0);
+			s = b.d[0];
+		} while (!s);
+
+		BN_copy(&b, &a);
+		r = BN_div_word(&b, s);
+
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," / ");
+				print_word(bp,s);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&b);
+			BIO_puts(bp,"\n");
+
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," % ");
+				print_word(bp,s);
+				BIO_puts(bp," - ");
+				}
+			print_word(bp,r);
+			BIO_puts(bp,"\n");
+			}
+		BN_mul_word(&b,s);
+		BN_add_word(&b,r);
+		BN_sub(&b,&a,&b);
+		if(!BN_is_zero(&b))
+		    {
+		    fprintf(stderr,"Division (word) test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(&a);
+	BN_free(&b);
+	return(1);
+	}
+
+int test_div_recp(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM a,b,c,d,e;
+	BN_RECP_CTX recp;
+	int i;
+
+	BN_RECP_CTX_init(&recp);
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+	BN_init(&d);
+	BN_init(&e);
+
+	for (i=0; i<num0+num1; i++)
+		{
+		if (i < num1)
+			{
+			BN_bntest_rand(&a,400,0,0);
+			BN_copy(&b,&a);
+			BN_lshift(&a,&a,i);
+			BN_add_word(&a,i);
+			}
+		else
+			BN_bntest_rand(&b,50+3*(i-num1),0,0);
+		a.neg=rand_neg();
+		b.neg=rand_neg();
+		BN_RECP_CTX_set(&recp,&b,ctx);
+		BN_div_recp(&d,&c,&a,&recp,ctx);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," / ");
+				BN_print(bp,&b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&d);
+			BIO_puts(bp,"\n");
+
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," % ");
+				BN_print(bp,&b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&c);
+			BIO_puts(bp,"\n");
+			}
+		BN_mul(&e,&d,&b,ctx);
+		BN_add(&d,&e,&c);
+		BN_sub(&d,&d,&a);
+		if(!BN_is_zero(&d))
+		    {
+		    fprintf(stderr,"Reciprocal division test failed!\n");
+		    fprintf(stderr,"a=");
+		    BN_print_fp(stderr,&a);
+		    fprintf(stderr,"\nb=");
+		    BN_print_fp(stderr,&b);
+		    fprintf(stderr,"\n");
+		    return 0;
+		    }
+		}
+	BN_free(&a);
+	BN_free(&b);
+	BN_free(&c);
+	BN_free(&d);
+	BN_free(&e);
+	BN_RECP_CTX_free(&recp);
+	return(1);
+	}
+
+int test_mul(BIO *bp)
+	{
+	BIGNUM a,b,c,d,e;
+	int i;
+	BN_CTX *ctx;
+
+	ctx = BN_CTX_new();
+	if (ctx == NULL) EXIT(1);
+	
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+	BN_init(&d);
+	BN_init(&e);
+
+	for (i=0; i<num0+num1; i++)
+		{
+		if (i <= num1)
+			{
+			BN_bntest_rand(&a,100,0,0);
+			BN_bntest_rand(&b,100,0,0);
+			}
+		else
+			BN_bntest_rand(&b,i-num1,0,0);
+		a.neg=rand_neg();
+		b.neg=rand_neg();
+		BN_mul(&c,&a,&b,ctx);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," * ");
+				BN_print(bp,&b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&c);
+			BIO_puts(bp,"\n");
+			}
+		BN_div(&d,&e,&c,&a,ctx);
+		BN_sub(&d,&d,&b);
+		if(!BN_is_zero(&d) || !BN_is_zero(&e))
+		    {
+		    fprintf(stderr,"Multiplication test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(&a);
+	BN_free(&b);
+	BN_free(&c);
+	BN_free(&d);
+	BN_free(&e);
+	BN_CTX_free(ctx);
+	return(1);
+	}
+
+int test_sqr(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM a,c,d,e;
+	int i;
+
+	BN_init(&a);
+	BN_init(&c);
+	BN_init(&d);
+	BN_init(&e);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(&a,40+i*10,0,0);
+		a.neg=rand_neg();
+		BN_sqr(&c,&a,ctx);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," * ");
+				BN_print(bp,&a);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&c);
+			BIO_puts(bp,"\n");
+			}
+		BN_div(&d,&e,&c,&a,ctx);
+		BN_sub(&d,&d,&a);
+		if(!BN_is_zero(&d) || !BN_is_zero(&e))
+		    {
+		    fprintf(stderr,"Square test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(&a);
+	BN_free(&c);
+	BN_free(&d);
+	BN_free(&e);
+	return(1);
+	}
+
+int test_mont(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM a,b,c,d,A,B;
+	BIGNUM n;
+	int i;
+	BN_MONT_CTX *mont;
+
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+	BN_init(&d);
+	BN_init(&A);
+	BN_init(&B);
+	BN_init(&n);
+
+	mont=BN_MONT_CTX_new();
+	if (mont == NULL)
+		return 0;
+
+	BN_bntest_rand(&a,100,0,0); /**/
+	BN_bntest_rand(&b,100,0,0); /**/
+	for (i=0; i<num2; i++)
+		{
+		int bits = (200*(i+1))/num2;
+
+		if (bits == 0)
+			continue;
+		BN_bntest_rand(&n,bits,0,1);
+		BN_MONT_CTX_set(mont,&n,ctx);
+
+		BN_nnmod(&a,&a,&n,ctx);
+		BN_nnmod(&b,&b,&n,ctx);
+
+		BN_to_montgomery(&A,&a,mont,ctx);
+		BN_to_montgomery(&B,&b,mont,ctx);
+
+		BN_mod_mul_montgomery(&c,&A,&B,mont,ctx);/**/
+		BN_from_montgomery(&A,&c,mont,ctx);/**/
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+#ifdef undef
+fprintf(stderr,"%d * %d %% %d\n",
+BN_num_bits(&a),
+BN_num_bits(&b),
+BN_num_bits(mont->N));
+#endif
+				BN_print(bp,&a);
+				BIO_puts(bp," * ");
+				BN_print(bp,&b);
+				BIO_puts(bp," % ");
+				BN_print(bp,&(mont->N));
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,&A);
+			BIO_puts(bp,"\n");
+			}
+		BN_mod_mul(&d,&a,&b,&n,ctx);
+		BN_sub(&d,&d,&A);
+		if(!BN_is_zero(&d))
+		    {
+		    fprintf(stderr,"Montgomery multiplication test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_MONT_CTX_free(mont);
+	BN_free(&a);
+	BN_free(&b);
+	BN_free(&c);
+	BN_free(&d);
+	BN_free(&A);
+	BN_free(&B);
+	BN_free(&n);
+	return(1);
+	}
+
+int test_mod(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM *a,*b,*c,*d,*e;
+	int i;
+
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+
+	BN_bntest_rand(a,1024,0,0); /**/
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(b,450+i*10,0,0); /**/
+		a->neg=rand_neg();
+		b->neg=rand_neg();
+		BN_mod(c,a,b,ctx);/**/
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," % ");
+				BN_print(bp,b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,c);
+			BIO_puts(bp,"\n");
+			}
+		BN_div(d,e,a,b,ctx);
+		BN_sub(e,e,c);
+		if(!BN_is_zero(e))
+		    {
+		    fprintf(stderr,"Modulo test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	return(1);
+	}
+
+int test_mod_mul(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM *a,*b,*c,*d,*e;
+	int i,j;
+
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+
+	for (j=0; j<3; j++) {
+	BN_bntest_rand(c,1024,0,0); /**/
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a,475+i*10,0,0); /**/
+		BN_bntest_rand(b,425+i*11,0,0); /**/
+		a->neg=rand_neg();
+		b->neg=rand_neg();
+		if (!BN_mod_mul(e,a,b,c,ctx))
+			{
+			unsigned long l;
+
+			while ((l=ERR_get_error()))
+				fprintf(stderr,"ERROR:%s\n",
+					ERR_error_string(l,NULL));
+			EXIT(1);
+			}
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," * ");
+				BN_print(bp,b);
+				BIO_puts(bp," % ");
+				BN_print(bp,c);
+				if ((a->neg ^ b->neg) && !BN_is_zero(e))
+					{
+					/* If  (a*b) % c  is negative,  c  must be added
+					 * in order to obtain the normalized remainder
+					 * (new with OpenSSL 0.9.7, previous versions of
+					 * BN_mod_mul could generate negative results)
+					 */
+					BIO_puts(bp," + ");
+					BN_print(bp,c);
+					}
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,e);
+			BIO_puts(bp,"\n");
+			}
+		BN_mul(d,a,b,ctx);
+		BN_sub(d,d,e);
+		BN_div(a,b,d,c,ctx);
+		if(!BN_is_zero(b))
+		    {
+		    fprintf(stderr,"Modulo multiply test failed!\n");
+		    ERR_print_errors_fp(stderr);
+		    return 0;
+		    }
+		}
+	}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	return(1);
+	}
+
+int test_mod_exp(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM *a,*b,*c,*d,*e;
+	int i;
+
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+
+	BN_bntest_rand(c,30,0,1); /* must be odd for montgomery */
+	for (i=0; i<num2; i++)
+		{
+		BN_bntest_rand(a,20+i*5,0,0); /**/
+		BN_bntest_rand(b,2+i,0,0); /**/
+
+		if (!BN_mod_exp(d,a,b,c,ctx))
+			return(0);
+
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," ^ ");
+				BN_print(bp,b);
+				BIO_puts(bp," % ");
+				BN_print(bp,c);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,d);
+			BIO_puts(bp,"\n");
+			}
+		BN_exp(e,a,b,ctx);
+		BN_sub(e,e,d);
+		BN_div(a,b,e,c,ctx);
+		if(!BN_is_zero(b))
+		    {
+		    fprintf(stderr,"Modulo exponentiation test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	return(1);
+	}
+
+int test_mod_exp_mont_consttime(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM *a,*b,*c,*d,*e;
+	int i;
+
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+
+	BN_bntest_rand(c,30,0,1); /* must be odd for montgomery */
+	for (i=0; i<num2; i++)
+		{
+		BN_bntest_rand(a,20+i*5,0,0); /**/
+		BN_bntest_rand(b,2+i,0,0); /**/
+
+		if (!BN_mod_exp_mont_consttime(d,a,b,c,ctx,NULL))
+			return(00);
+
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," ^ ");
+				BN_print(bp,b);
+				BIO_puts(bp," % ");
+				BN_print(bp,c);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,d);
+			BIO_puts(bp,"\n");
+			}
+		BN_exp(e,a,b,ctx);
+		BN_sub(e,e,d);
+		BN_div(a,b,e,c,ctx);
+		if(!BN_is_zero(b))
+		    {
+		    fprintf(stderr,"Modulo exponentiation test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	return(1);
+	}
+
+int test_exp(BIO *bp, BN_CTX *ctx)
+	{
+	BIGNUM *a,*b,*d,*e,*one;
+	int i;
+
+	a=BN_new();
+	b=BN_new();
+	d=BN_new();
+	e=BN_new();
+	one=BN_new();
+	BN_one(one);
+
+	for (i=0; i<num2; i++)
+		{
+		BN_bntest_rand(a,20+i*5,0,0); /**/
+		BN_bntest_rand(b,2+i,0,0); /**/
+
+		if (BN_exp(d,a,b,ctx) <= 0)
+			return(0);
+
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," ^ ");
+				BN_print(bp,b);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,d);
+			BIO_puts(bp,"\n");
+			}
+		BN_one(e);
+		for( ; !BN_is_zero(b) ; BN_sub(b,b,one))
+		    BN_mul(e,e,a,ctx);
+		BN_sub(e,e,d);
+		if(!BN_is_zero(e))
+		    {
+		    fprintf(stderr,"Exponentiation test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(d);
+	BN_free(e);
+	BN_free(one);
+	return(1);
+	}
+
+int test_gf2m_add(BIO *bp)
+	{
+	BIGNUM a,b,c;
+	int i, ret = 0;
+
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_rand(&a,512,0,0);
+		BN_copy(&b, BN_value_one());
+		a.neg=rand_neg();
+		b.neg=rand_neg();
+		BN_GF2m_add(&c,&a,&b);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,&a);
+				BIO_puts(bp," ^ ");
+				BN_print(bp,&b);
+				BIO_puts(bp," = ");
+				}
+			BN_print(bp,&c);
+			BIO_puts(bp,"\n");
+			}
+#endif
+		/* Test that two added values have the correct parity. */
+		if((BN_is_odd(&a) && BN_is_odd(&c)) || (!BN_is_odd(&a) && !BN_is_odd(&c)))
+			{
+		    fprintf(stderr,"GF(2^m) addition test (a) failed!\n");
+			goto err;
+			}
+		BN_GF2m_add(&c,&c,&c);
+		/* Test that c + c = 0. */
+		if(!BN_is_zero(&c))
+		    {
+		    fprintf(stderr,"GF(2^m) addition test (b) failed!\n");
+			goto err;
+		    }
+		}
+	ret = 1;
+  err:
+	BN_free(&a);
+	BN_free(&b);
+	BN_free(&c);
+	return ret;
+	}
+
+int test_gf2m_mod(BIO *bp)
+	{
+	BIGNUM *a,*b[2],*c,*d,*e;
+	int i, j, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 1024, 0, 0);
+		for (j=0; j < 2; j++)
+			{
+			BN_GF2m_mod(c, a, b[j]);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+			if (bp != NULL)
+				{
+				if (!results)
+					{
+					BN_print(bp,a);
+					BIO_puts(bp," % ");
+					BN_print(bp,b[j]);
+					BIO_puts(bp," - ");
+					BN_print(bp,c);
+					BIO_puts(bp,"\n");
+					}
+				}
+#endif
+			BN_GF2m_add(d, a, c);
+			BN_GF2m_mod(e, d, b[j]);
+			/* Test that a + (a mod p) mod p == 0. */
+			if(!BN_is_zero(e))
+				{
+				fprintf(stderr,"GF(2^m) modulo test failed!\n");
+				goto err;
+				}
+			}
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	return ret;
+	}
+
+int test_gf2m_mod_mul(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b[2],*c,*d,*e,*f,*g,*h;
+	int i, j, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+	f=BN_new();
+	g=BN_new();
+	h=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 1024, 0, 0);
+		BN_bntest_rand(c, 1024, 0, 0);
+		BN_bntest_rand(d, 1024, 0, 0);
+		for (j=0; j < 2; j++)
+			{
+			BN_GF2m_mod_mul(e, a, c, b[j], ctx);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+			if (bp != NULL)
+				{
+				if (!results)
+					{
+					BN_print(bp,a);
+					BIO_puts(bp," * ");
+					BN_print(bp,c);
+					BIO_puts(bp," % ");
+					BN_print(bp,b[j]);
+					BIO_puts(bp," - ");
+					BN_print(bp,e);
+					BIO_puts(bp,"\n");
+					}
+				}
+#endif
+			BN_GF2m_add(f, a, d);
+			BN_GF2m_mod_mul(g, f, c, b[j], ctx);
+			BN_GF2m_mod_mul(h, d, c, b[j], ctx);
+			BN_GF2m_add(f, e, g);
+			BN_GF2m_add(f, f, h);
+			/* Test that (a+d)*c = a*c + d*c. */
+			if(!BN_is_zero(f))
+				{
+				fprintf(stderr,"GF(2^m) modular multiplication test failed!\n");
+				goto err;
+				}
+			}
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	BN_free(f);
+	BN_free(g);
+	BN_free(h);
+	return ret;
+	}
+
+int test_gf2m_mod_sqr(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b[2],*c,*d;
+	int i, j, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 1024, 0, 0);
+		for (j=0; j < 2; j++)
+			{
+			BN_GF2m_mod_sqr(c, a, b[j], ctx);
+			BN_copy(d, a);
+			BN_GF2m_mod_mul(d, a, d, b[j], ctx);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+			if (bp != NULL)
+				{
+				if (!results)
+					{
+					BN_print(bp,a);
+					BIO_puts(bp," ^ 2 % ");
+					BN_print(bp,b[j]);
+					BIO_puts(bp, " = ");
+					BN_print(bp,c);
+					BIO_puts(bp,"; a * a = ");
+					BN_print(bp,d);
+					BIO_puts(bp,"\n");
+					}
+				}
+#endif
+			BN_GF2m_add(d, c, d);
+			/* Test that a*a = a^2. */
+			if(!BN_is_zero(d))
+				{
+				fprintf(stderr,"GF(2^m) modular squaring test failed!\n");
+				goto err;
+				}
+			}
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	return ret;
+	}
+
+int test_gf2m_mod_inv(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b[2],*c,*d;
+	int i, j, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 512, 0, 0); 
+		for (j=0; j < 2; j++)
+			{
+			BN_GF2m_mod_inv(c, a, b[j], ctx);
+			BN_GF2m_mod_mul(d, a, c, b[j], ctx);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+			if (bp != NULL)
+				{
+				if (!results)
+					{
+					BN_print(bp,a);
+					BIO_puts(bp, " * ");
+					BN_print(bp,c);
+					BIO_puts(bp," - 1 % ");
+					BN_print(bp,b[j]);
+					BIO_puts(bp,"\n");
+					}
+				}
+#endif
+			/* Test that ((1/a)*a) = 1. */
+			if(!BN_is_one(d))
+				{
+				fprintf(stderr,"GF(2^m) modular inversion test failed!\n");
+				goto err;
+				}
+			}
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	return ret;
+	}
+
+int test_gf2m_mod_div(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b[2],*c,*d,*e,*f;
+	int i, j, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+	f=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 512, 0, 0); 
+		BN_bntest_rand(c, 512, 0, 0);
+		for (j=0; j < 2; j++)
+			{
+			BN_GF2m_mod_div(d, a, c, b[j], ctx);
+			BN_GF2m_mod_mul(e, d, c, b[j], ctx);
+			BN_GF2m_mod_div(f, a, e, b[j], ctx);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+			if (bp != NULL)
+				{
+				if (!results)
+					{
+					BN_print(bp,a);
+					BIO_puts(bp, " = ");
+					BN_print(bp,c);
+					BIO_puts(bp," * ");
+					BN_print(bp,d);
+					BIO_puts(bp, " % ");
+					BN_print(bp,b[j]);
+					BIO_puts(bp,"\n");
+					}
+				}
+#endif
+			/* Test that ((a/c)*c)/a = 1. */
+			if(!BN_is_one(f))
+				{
+				fprintf(stderr,"GF(2^m) modular division test failed!\n");
+				goto err;
+				}
+			}
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	BN_free(f);
+	return ret;
+	}
+
+int test_gf2m_mod_exp(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b[2],*c,*d,*e,*f;
+	int i, j, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+	f=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 512, 0, 0);
+		BN_bntest_rand(c, 512, 0, 0);
+		BN_bntest_rand(d, 512, 0, 0);
+		for (j=0; j < 2; j++)
+			{
+			BN_GF2m_mod_exp(e, a, c, b[j], ctx);
+			BN_GF2m_mod_exp(f, a, d, b[j], ctx);
+			BN_GF2m_mod_mul(e, e, f, b[j], ctx);
+			BN_add(f, c, d);
+			BN_GF2m_mod_exp(f, a, f, b[j], ctx);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+			if (bp != NULL)
+				{
+				if (!results)
+					{
+					BN_print(bp,a);
+					BIO_puts(bp, " ^ (");
+					BN_print(bp,c);
+					BIO_puts(bp," + ");
+					BN_print(bp,d);
+					BIO_puts(bp, ") = ");
+					BN_print(bp,e);
+					BIO_puts(bp, "; - ");
+					BN_print(bp,f);
+					BIO_puts(bp, " % ");
+					BN_print(bp,b[j]);
+					BIO_puts(bp,"\n");
+					}
+				}
+#endif
+			BN_GF2m_add(f, e, f);
+			/* Test that a^(c+d)=a^c*a^d. */
+			if(!BN_is_zero(f))
+				{
+				fprintf(stderr,"GF(2^m) modular exponentiation test failed!\n");
+				goto err;
+				}
+			}
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	BN_free(f);
+	return ret;
+	}
+
+int test_gf2m_mod_sqrt(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b[2],*c,*d,*e,*f;
+	int i, j, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+	f=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 512, 0, 0);
+		for (j=0; j < 2; j++)
+			{
+			BN_GF2m_mod(c, a, b[j]);
+			BN_GF2m_mod_sqrt(d, a, b[j], ctx);
+			BN_GF2m_mod_sqr(e, d, b[j], ctx);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+			if (bp != NULL)
+				{
+				if (!results)
+					{
+					BN_print(bp,d);
+					BIO_puts(bp, " ^ 2 - ");
+					BN_print(bp,a);
+					BIO_puts(bp,"\n");
+					}
+				}
+#endif
+			BN_GF2m_add(f, c, e);
+			/* Test that d^2 = a, where d = sqrt(a). */
+			if(!BN_is_zero(f))
+				{
+				fprintf(stderr,"GF(2^m) modular square root test failed!\n");
+				goto err;
+				}
+			}
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	BN_free(f);
+	return ret;
+	}
+
+int test_gf2m_mod_solve_quad(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b[2],*c,*d,*e;
+	int i, j, s = 0, t, ret = 0;
+	int p0[] = {163,7,6,3,0,-1};
+	int p1[] = {193,15,0,-1};
+
+	a=BN_new();
+	b[0]=BN_new();
+	b[1]=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+
+	BN_GF2m_arr2poly(p0, b[0]);
+	BN_GF2m_arr2poly(p1, b[1]);
+
+	for (i=0; i<num0; i++)
+		{
+		BN_bntest_rand(a, 512, 0, 0);
+		for (j=0; j < 2; j++)
+			{
+			t = BN_GF2m_mod_solve_quad(c, a, b[j], ctx);
+			if (t)
+				{
+				s++;
+				BN_GF2m_mod_sqr(d, c, b[j], ctx);
+				BN_GF2m_add(d, c, d);
+				BN_GF2m_mod(e, a, b[j]);
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+				if (bp != NULL)
+					{
+					if (!results)
+						{
+						BN_print(bp,c);
+						BIO_puts(bp, " is root of z^2 + z = ");
+						BN_print(bp,a);
+						BIO_puts(bp, " % ");
+						BN_print(bp,b[j]);
+						BIO_puts(bp, "\n");
+						}
+					}
+#endif
+				BN_GF2m_add(e, e, d);
+				/* Test that solution of quadratic c satisfies c^2 + c = a. */
+				if(!BN_is_zero(e))
+					{
+					fprintf(stderr,"GF(2^m) modular solve quadratic test failed!\n");
+					goto err;
+					}
+
+				}
+			else 
+				{
+#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
+				if (bp != NULL)
+					{
+					if (!results)
+						{
+						BIO_puts(bp, "There are no roots of z^2 + z = ");
+						BN_print(bp,a);
+						BIO_puts(bp, " % ");
+						BN_print(bp,b[j]);
+						BIO_puts(bp, "\n");
+						}
+					}
+#endif
+				}
+			}
+		}
+	if (s == 0)
+		{	
+		fprintf(stderr,"All %i tests of GF(2^m) modular solve quadratic resulted in no roots;\n", num0);
+		fprintf(stderr,"this is very unlikely and probably indicates an error.\n");
+		goto err;
+		}
+	ret = 1;
+  err:
+	BN_free(a);
+	BN_free(b[0]);
+	BN_free(b[1]);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	return ret;
+	}
+
+static int genprime_cb(int p, int n, BN_GENCB *arg)
+	{
+	char c='*';
+
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	putc(c, stderr);
+	fflush(stderr);
+	return 1;
+	}
+
+int test_kron(BIO *bp, BN_CTX *ctx)
+	{
+	BN_GENCB cb;
+	BIGNUM *a,*b,*r,*t;
+	int i;
+	int legendre, kronecker;
+	int ret = 0;
+
+	a = BN_new();
+	b = BN_new();
+	r = BN_new();
+	t = BN_new();
+	if (a == NULL || b == NULL || r == NULL || t == NULL) goto err;
+
+	BN_GENCB_set(&cb, genprime_cb, NULL);
+	
+	/* We test BN_kronecker(a, b, ctx) just for  b  odd (Jacobi symbol).
+	 * In this case we know that if  b  is prime, then BN_kronecker(a, b, ctx)
+	 * is congruent to $a^{(b-1)/2}$, modulo $b$ (Legendre symbol).
+	 * So we generate a random prime  b  and compare these values
+	 * for a number of random  a's.  (That is, we run the Solovay-Strassen
+	 * primality test to confirm that  b  is prime, except that we
+	 * don't want to test whether  b  is prime but whether BN_kronecker
+	 * works.) */
+
+	if (!BN_generate_prime_ex(b, 512, 0, NULL, NULL, &cb)) goto err;
+	b->neg = rand_neg();
+	putc('\n', stderr);
+
+	for (i = 0; i < num0; i++)
+		{
+		if (!BN_bntest_rand(a, 512, 0, 0)) goto err;
+		a->neg = rand_neg();
+
+		/* t := (|b|-1)/2  (note that b is odd) */
+		if (!BN_copy(t, b)) goto err;
+		t->neg = 0;
+		if (!BN_sub_word(t, 1)) goto err;
+		if (!BN_rshift1(t, t)) goto err;
+		/* r := a^t mod b */
+		b->neg=0;
+		
+		if (!BN_mod_exp_recp(r, a, t, b, ctx)) goto err;
+		b->neg=1;
+
+		if (BN_is_word(r, 1))
+			legendre = 1;
+		else if (BN_is_zero(r))
+			legendre = 0;
+		else
+			{
+			if (!BN_add_word(r, 1)) goto err;
+			if (0 != BN_ucmp(r, b))
+				{
+				fprintf(stderr, "Legendre symbol computation failed\n");
+				goto err;
+				}
+			legendre = -1;
+			}
+		
+		kronecker = BN_kronecker(a, b, ctx);
+		if (kronecker < -1) goto err;
+		/* we actually need BN_kronecker(a, |b|) */
+		if (a->neg && b->neg)
+			kronecker = -kronecker;
+		
+		if (legendre != kronecker)
+			{
+			fprintf(stderr, "legendre != kronecker; a = ");
+			BN_print_fp(stderr, a);
+			fprintf(stderr, ", b = ");
+			BN_print_fp(stderr, b);
+			fprintf(stderr, "\n");
+			goto err;
+			}
+
+		putc('.', stderr);
+		fflush(stderr);
+		}
+
+	putc('\n', stderr);
+	fflush(stderr);
+	ret = 1;
+ err:
+	if (a != NULL) BN_free(a);
+	if (b != NULL) BN_free(b);
+	if (r != NULL) BN_free(r);
+	if (t != NULL) BN_free(t);
+	return ret;
+	}
+
+int test_sqrt(BIO *bp, BN_CTX *ctx)
+	{
+	BN_GENCB cb;
+	BIGNUM *a,*p,*r;
+	int i, j;
+	int ret = 0;
+
+	a = BN_new();
+	p = BN_new();
+	r = BN_new();
+	if (a == NULL || p == NULL || r == NULL) goto err;
+
+	BN_GENCB_set(&cb, genprime_cb, NULL);
+
+	for (i = 0; i < 16; i++)
+		{
+		if (i < 8)
+			{
+			unsigned primes[8] = { 2, 3, 5, 7, 11, 13, 17, 19 };
+			
+			if (!BN_set_word(p, primes[i])) goto err;
+			}
+		else
+			{
+			if (!BN_set_word(a, 32)) goto err;
+			if (!BN_set_word(r, 2*i + 1)) goto err;
+		
+			if (!BN_generate_prime_ex(p, 256, 0, a, r, &cb)) goto err;
+			putc('\n', stderr);
+			}
+		p->neg = rand_neg();
+
+		for (j = 0; j < num2; j++)
+			{
+			/* construct 'a' such that it is a square modulo p,
+			 * but in general not a proper square and not reduced modulo p */
+			if (!BN_bntest_rand(r, 256, 0, 3)) goto err;
+			if (!BN_nnmod(r, r, p, ctx)) goto err;
+			if (!BN_mod_sqr(r, r, p, ctx)) goto err;
+			if (!BN_bntest_rand(a, 256, 0, 3)) goto err;
+			if (!BN_nnmod(a, a, p, ctx)) goto err;
+			if (!BN_mod_sqr(a, a, p, ctx)) goto err;
+			if (!BN_mul(a, a, r, ctx)) goto err;
+			if (rand_neg())
+				if (!BN_sub(a, a, p)) goto err;
+
+			if (!BN_mod_sqrt(r, a, p, ctx)) goto err;
+			if (!BN_mod_sqr(r, r, p, ctx)) goto err;
+
+			if (!BN_nnmod(a, a, p, ctx)) goto err;
+
+			if (BN_cmp(a, r) != 0)
+				{
+				fprintf(stderr, "BN_mod_sqrt failed: a = ");
+				BN_print_fp(stderr, a);
+				fprintf(stderr, ", r = ");
+				BN_print_fp(stderr, r);
+				fprintf(stderr, ", p = ");
+				BN_print_fp(stderr, p);
+				fprintf(stderr, "\n");
+				goto err;
+				}
+
+			putc('.', stderr);
+			fflush(stderr);
+			}
+		
+		putc('\n', stderr);
+		fflush(stderr);
+		}
+	ret = 1;
+ err:
+	if (a != NULL) BN_free(a);
+	if (p != NULL) BN_free(p);
+	if (r != NULL) BN_free(r);
+	return ret;
+	}
+
+int test_lshift(BIO *bp,BN_CTX *ctx,BIGNUM *a_)
+	{
+	BIGNUM *a,*b,*c,*d;
+	int i;
+
+	b=BN_new();
+	c=BN_new();
+	d=BN_new();
+	BN_one(c);
+
+	if(a_)
+	    a=a_;
+	else
+	    {
+	    a=BN_new();
+	    BN_bntest_rand(a,200,0,0); /**/
+	    a->neg=rand_neg();
+	    }
+	for (i=0; i<num0; i++)
+		{
+		BN_lshift(b,a,i+1);
+		BN_add(c,c,c);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," * ");
+				BN_print(bp,c);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,b);
+			BIO_puts(bp,"\n");
+			}
+		BN_mul(d,a,c,ctx);
+		BN_sub(d,d,b);
+		if(!BN_is_zero(d))
+		    {
+		    fprintf(stderr,"Left shift test failed!\n");
+		    fprintf(stderr,"a=");
+		    BN_print_fp(stderr,a);
+		    fprintf(stderr,"\nb=");
+		    BN_print_fp(stderr,b);
+		    fprintf(stderr,"\nc=");
+		    BN_print_fp(stderr,c);
+		    fprintf(stderr,"\nd=");
+		    BN_print_fp(stderr,d);
+		    fprintf(stderr,"\n");
+		    return 0;
+		    }
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	BN_free(d);
+	return(1);
+	}
+
+int test_lshift1(BIO *bp)
+	{
+	BIGNUM *a,*b,*c;
+	int i;
+
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+
+	BN_bntest_rand(a,200,0,0); /**/
+	a->neg=rand_neg();
+	for (i=0; i<num0; i++)
+		{
+		BN_lshift1(b,a);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," * 2");
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,b);
+			BIO_puts(bp,"\n");
+			}
+		BN_add(c,a,a);
+		BN_sub(a,b,c);
+		if(!BN_is_zero(a))
+		    {
+		    fprintf(stderr,"Left shift one test failed!\n");
+		    return 0;
+		    }
+		
+		BN_copy(a,b);
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	return(1);
+	}
+
+int test_rshift(BIO *bp,BN_CTX *ctx)
+	{
+	BIGNUM *a,*b,*c,*d,*e;
+	int i;
+
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+	d=BN_new();
+	e=BN_new();
+	BN_one(c);
+
+	BN_bntest_rand(a,200,0,0); /**/
+	a->neg=rand_neg();
+	for (i=0; i<num0; i++)
+		{
+		BN_rshift(b,a,i+1);
+		BN_add(c,c,c);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," / ");
+				BN_print(bp,c);
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,b);
+			BIO_puts(bp,"\n");
+			}
+		BN_div(d,e,a,c,ctx);
+		BN_sub(d,d,b);
+		if(!BN_is_zero(d))
+		    {
+		    fprintf(stderr,"Right shift test failed!\n");
+		    return 0;
+		    }
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	BN_free(d);
+	BN_free(e);
+	return(1);
+	}
+
+int test_rshift1(BIO *bp)
+	{
+	BIGNUM *a,*b,*c;
+	int i;
+
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+
+	BN_bntest_rand(a,200,0,0); /**/
+	a->neg=rand_neg();
+	for (i=0; i<num0; i++)
+		{
+		BN_rshift1(b,a);
+		if (bp != NULL)
+			{
+			if (!results)
+				{
+				BN_print(bp,a);
+				BIO_puts(bp," / 2");
+				BIO_puts(bp," - ");
+				}
+			BN_print(bp,b);
+			BIO_puts(bp,"\n");
+			}
+		BN_sub(c,a,b);
+		BN_sub(c,c,b);
+		if(!BN_is_zero(c) && !BN_abs_is_word(c, 1))
+		    {
+		    fprintf(stderr,"Right shift one test failed!\n");
+		    return 0;
+		    }
+		BN_copy(a,b);
+		}
+	BN_free(a);
+	BN_free(b);
+	BN_free(c);
+	return(1);
+	}
+
+int rand_neg(void)
+	{
+	static unsigned int neg=0;
+	static int sign[8]={0,0,0,1,1,0,1,1};
+
+	return(sign[(neg++)%8]);
+	}
diff --git a/app/openssl/crypto/bn/divtest.c b/app/openssl/crypto/bn/divtest.c
new file mode 100644
index 00000000..d3fc688f
--- /dev/null
+++ b/app/openssl/crypto/bn/divtest.c
@@ -0,0 +1,41 @@
+#include <openssl/bn.h>
+#include <openssl/rand.h>
+
+static int Rand(n)
+{
+    unsigned char x[2];
+    RAND_pseudo_bytes(x,2);
+    return (x[0] + 2*x[1]);
+}
+
+static void bug(char *m, BIGNUM *a, BIGNUM *b)
+{
+    printf("%s!\na=",m);
+    BN_print_fp(stdout, a);
+    printf("\nb=");
+    BN_print_fp(stdout, b);
+    printf("\n");
+    fflush(stdout);
+}
+
+main()
+{
+    BIGNUM *a=BN_new(), *b=BN_new(), *c=BN_new(), *d=BN_new(),
+	*C=BN_new(), *D=BN_new();
+    BN_RECP_CTX *recp=BN_RECP_CTX_new();
+    BN_CTX *ctx=BN_CTX_new();
+
+    for(;;) {
+	BN_pseudo_rand(a,Rand(),0,0);
+	BN_pseudo_rand(b,Rand(),0,0);
+	if (BN_is_zero(b)) continue;
+
+	BN_RECP_CTX_set(recp,b,ctx);
+	if (BN_div(C,D,a,b,ctx) != 1)
+	    bug("BN_div failed",a,b);
+	if (BN_div_recp(c,d,a,recp,ctx) != 1)
+	    bug("BN_div_recp failed",a,b);
+	else if (BN_cmp(c,C) != 0 || BN_cmp(c,C) != 0)
+	    bug("mismatch",a,b);
+    }
+}
diff --git a/app/openssl/crypto/bn/exp.c b/app/openssl/crypto/bn/exp.c
new file mode 100644
index 00000000..4865b0ef
--- /dev/null
+++ b/app/openssl/crypto/bn/exp.c
@@ -0,0 +1,62 @@
+/* unused */
+
+#include <stdio.h>
+#include <openssl/tmdiff.h>
+#include "bn_lcl.h"
+
+#define SIZE	256
+#define NUM	(8*8*8)
+#define MOD	(8*8*8*8*8)
+
+main(argc,argv)
+int argc;
+char *argv[];
+	{
+	BN_CTX ctx;
+	BIGNUM a,b,c,r,rr,t,l;
+	int j,i,size=SIZE,num=NUM,mod=MOD;
+	char *start,*end;
+	BN_MONT_CTX mont;
+	double d,md;
+
+	BN_MONT_CTX_init(&mont);
+	BN_CTX_init(&ctx);
+	BN_init(&a);
+	BN_init(&b);
+	BN_init(&c);
+	BN_init(&r);
+
+	start=ms_time_new();
+	end=ms_time_new();
+	while (size <= 1024*8)
+		{
+		BN_rand(&a,size,0,0);
+		BN_rand(&b,size,1,0);
+		BN_rand(&c,size,0,1);
+
+		BN_mod(&a,&a,&c,&ctx);
+
+		ms_time_get(start);
+		for (i=0; i<10; i++)
+			BN_MONT_CTX_set(&mont,&c,&ctx);
+		ms_time_get(end);
+		md=ms_time_diff(start,end);
+
+		ms_time_get(start);
+		for (i=0; i<num; i++)
+			{
+			/* bn_mull(&r,&a,&b,&ctx); */
+			/* BN_sqr(&r,&a,&ctx); */
+			BN_mod_exp_mont(&r,&a,&b,&c,&ctx,&mont);
+			}
+		ms_time_get(end);
+		d=ms_time_diff(start,end)/* *50/33 */;
+		printf("%5d bit:%6.2f %6d %6.4f %4d m_set(%5.4f)\n",size,
+			d,num,d/num,(int)((d/num)*mod),md/10.0);
+		num/=8;
+		mod/=8;
+		if (num <= 0) num=1;
+		size*=2;
+		}
+
+	}
diff --git a/app/openssl/crypto/bn/expspeed.c b/app/openssl/crypto/bn/expspeed.c
new file mode 100644
index 00000000..4d5f221f
--- /dev/null
+++ b/app/openssl/crypto/bn/expspeed.c
@@ -0,0 +1,353 @@
+/* unused */
+
+/* crypto/bn/expspeed.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+/* most of this code has been pilfered from my libdes speed.c program */
+
+#define BASENUM	5000
+#define NUM_START 0
+
+
+/* determine timings for modexp, modmul, modsqr, gcd, Kronecker symbol,
+ * modular inverse, or modular square roots */
+#define TEST_EXP
+#undef TEST_MUL
+#undef TEST_SQR
+#undef TEST_GCD
+#undef TEST_KRON
+#undef TEST_INV
+#undef TEST_SQRT
+#define P_MOD_64 9 /* least significant 6 bits for prime to be used for BN_sqrt timings */
+
+#if defined(TEST_EXP) + defined(TEST_MUL) + defined(TEST_SQR) + defined(TEST_GCD) + defined(TEST_KRON) + defined(TEST_INV) +defined(TEST_SQRT) != 1
+#  error "choose one test"
+#endif
+
+#if defined(TEST_INV) || defined(TEST_SQRT)
+#  define C_PRIME
+static void genprime_cb(int p, int n, void *arg);
+#endif
+
+
+
+#undef PROG
+#define PROG bnspeed_main
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <string.h>
+#include <openssl/crypto.h>
+#include <openssl/err.h>
+#include <openssl/rand.h>
+
+#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
+#define TIMES
+#endif
+
+#ifndef _IRIX
+#include <time.h>
+#endif
+#ifdef TIMES
+#include <sys/types.h>
+#include <sys/times.h>
+#endif
+
+/* Depending on the VMS version, the tms structure is perhaps defined.
+   The __TMS macro will show if it was.  If it wasn't defined, we should
+   undefine TIMES, since that tells the rest of the program how things
+   should be handled.				-- Richard Levitte */
+#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
+#undef TIMES
+#endif
+
+#ifndef TIMES
+#include <sys/timeb.h>
+#endif
+
+#if defined(sun) || defined(__ultrix)
+#define _POSIX_SOURCE
+#include <limits.h>
+#include <sys/param.h>
+#endif
+
+#include <openssl/bn.h>
+#include <openssl/x509.h>
+
+/* The following if from times(3) man page.  It may need to be changed */
+#ifndef HZ
+# ifndef CLK_TCK
+#  ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
+#   define HZ	100.0
+#  else /* _BSD_CLK_TCK_ */
+#   define HZ ((double)_BSD_CLK_TCK_)
+#  endif
+# else /* CLK_TCK */
+#  define HZ ((double)CLK_TCK)
+# endif
+#endif
+
+#undef BUFSIZE
+#define BUFSIZE	((long)1024*8)
+int run=0;
+
+static double Time_F(int s);
+#define START	0
+#define STOP	1
+
+static double Time_F(int s)
+	{
+	double ret;
+#ifdef TIMES
+	static struct tms tstart,tend;
+
+	if (s == START)
+		{
+		times(&tstart);
+		return(0);
+		}
+	else
+		{
+		times(&tend);
+		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
+		return((ret < 1e-3)?1e-3:ret);
+		}
+#else /* !times() */
+	static struct timeb tstart,tend;
+	long i;
+
+	if (s == START)
+		{
+		ftime(&tstart);
+		return(0);
+		}
+	else
+		{
+		ftime(&tend);
+		i=(long)tend.millitm-(long)tstart.millitm;
+		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
+		return((ret < 0.001)?0.001:ret);
+		}
+#endif
+	}
+
+#define NUM_SIZES	7
+#if NUM_START > NUM_SIZES
+#   error "NUM_START > NUM_SIZES"
+#endif
+static int sizes[NUM_SIZES]={128,256,512,1024,2048,4096,8192};
+static int mul_c[NUM_SIZES]={8*8*8*8*8*8,8*8*8*8*8,8*8*8*8,8*8*8,8*8,8,1};
+/*static int sizes[NUM_SIZES]={59,179,299,419,539}; */
+
+#define RAND_SEED(string) { const char str[] = string; RAND_seed(string, sizeof str); }
+
+void do_mul_exp(BIGNUM *r,BIGNUM *a,BIGNUM *b,BIGNUM *c,BN_CTX *ctx); 
+
+int main(int argc, char **argv)
+	{
+	BN_CTX *ctx;
+	BIGNUM *a,*b,*c,*r;
+
+#if 1
+	if (!CRYPTO_set_mem_debug_functions(0,0,0,0,0))
+		abort();
+#endif
+
+	ctx=BN_CTX_new();
+	a=BN_new();
+	b=BN_new();
+	c=BN_new();
+	r=BN_new();
+
+	while (!RAND_status())
+		/* not enough bits */
+		RAND_SEED("I demand a manual recount!");
+
+	do_mul_exp(r,a,b,c,ctx);
+	return 0;
+	}
+
+void do_mul_exp(BIGNUM *r, BIGNUM *a, BIGNUM *b, BIGNUM *c, BN_CTX *ctx)
+	{
+	int i,k;
+	double tm;
+	long num;
+
+	num=BASENUM;
+	for (i=NUM_START; i<NUM_SIZES; i++)
+		{
+#ifdef C_PRIME
+#  ifdef TEST_SQRT
+		if (!BN_set_word(a, 64)) goto err;
+		if (!BN_set_word(b, P_MOD_64)) goto err;
+#    define ADD a
+#    define REM b
+#  else
+#    define ADD NULL
+#    define REM NULL
+#  endif
+		if (!BN_generate_prime(c,sizes[i],0,ADD,REM,genprime_cb,NULL)) goto err;
+		putc('\n', stderr);
+		fflush(stderr);
+#endif
+
+		for (k=0; k<num; k++)
+			{
+			if (k%50 == 0) /* Average over num/50 different choices of random numbers. */
+				{
+				if (!BN_pseudo_rand(a,sizes[i],1,0)) goto err;
+
+				if (!BN_pseudo_rand(b,sizes[i],1,0)) goto err;
+
+#ifndef C_PRIME
+				if (!BN_pseudo_rand(c,sizes[i],1,1)) goto err;
+#endif
+
+#ifdef TEST_SQRT				
+				if (!BN_mod_sqr(a,a,c,ctx)) goto err;
+				if (!BN_mod_sqr(b,b,c,ctx)) goto err;
+#else
+				if (!BN_nnmod(a,a,c,ctx)) goto err;
+				if (!BN_nnmod(b,b,c,ctx)) goto err;
+#endif
+
+				if (k == 0)
+					Time_F(START);
+				}
+
+#if defined(TEST_EXP)
+			if (!BN_mod_exp(r,a,b,c,ctx)) goto err;
+#elif defined(TEST_MUL)
+			{
+			int i = 0;
+			for (i = 0; i < 50; i++)
+				if (!BN_mod_mul(r,a,b,c,ctx)) goto err;
+			}
+#elif defined(TEST_SQR)
+			{
+			int i = 0;
+			for (i = 0; i < 50; i++)
+				{
+				if (!BN_mod_sqr(r,a,c,ctx)) goto err;
+				if (!BN_mod_sqr(r,b,c,ctx)) goto err;
+				}
+			}
+#elif defined(TEST_GCD)
+			if (!BN_gcd(r,a,b,ctx)) goto err;
+			if (!BN_gcd(r,b,c,ctx)) goto err;
+			if (!BN_gcd(r,c,a,ctx)) goto err;
+#elif defined(TEST_KRON)
+			if (-2 == BN_kronecker(a,b,ctx)) goto err;
+			if (-2 == BN_kronecker(b,c,ctx)) goto err;
+			if (-2 == BN_kronecker(c,a,ctx)) goto err;
+#elif defined(TEST_INV)
+			if (!BN_mod_inverse(r,a,c,ctx)) goto err;
+			if (!BN_mod_inverse(r,b,c,ctx)) goto err;
+#else /* TEST_SQRT */
+			if (!BN_mod_sqrt(r,a,c,ctx)) goto err;
+			if (!BN_mod_sqrt(r,b,c,ctx)) goto err;
+#endif
+			}
+		tm=Time_F(STOP);
+		printf(
+#if defined(TEST_EXP)
+			"modexp %4d ^ %4d %% %4d"
+#elif defined(TEST_MUL)
+			"50*modmul %4d %4d %4d"
+#elif defined(TEST_SQR)
+			"100*modsqr %4d %4d %4d"
+#elif defined(TEST_GCD)
+			"3*gcd %4d %4d %4d"
+#elif defined(TEST_KRON)
+			"3*kronecker %4d %4d %4d"
+#elif defined(TEST_INV)
+			"2*inv %4d %4d mod %4d"
+#else /* TEST_SQRT */
+			"2*sqrt [prime == %d (mod 64)] %4d %4d mod %4d"
+#endif
+			" -> %8.6fms %5.1f (%ld)\n",
+#ifdef TEST_SQRT
+			P_MOD_64,
+#endif
+			sizes[i],sizes[i],sizes[i],tm*1000.0/num,tm*mul_c[i]/num, num);
+		num/=7;
+		if (num <= 0) num=1;
+		}
+	return;
+
+ err:
+	ERR_print_errors_fp(stderr);
+	}
+
+
+#ifdef C_PRIME
+static void genprime_cb(int p, int n, void *arg)
+	{
+	char c='*';
+
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	putc(c, stderr);
+	fflush(stderr);
+	(void)n;
+	(void)arg;
+	}
+#endif
diff --git a/app/openssl/crypto/bn/exptest.c b/app/openssl/crypto/bn/exptest.c
new file mode 100644
index 00000000..074a8e88
--- /dev/null
+++ b/app/openssl/crypto/bn/exptest.c
@@ -0,0 +1,204 @@
+/* crypto/bn/exptest.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "../e_os.h"
+
+#include <openssl/bio.h>
+#include <openssl/bn.h>
+#include <openssl/rand.h>
+#include <openssl/err.h>
+
+#define NUM_BITS	(BN_BITS*2)
+
+static const char rnd_seed[] = "string to make the random number generator think it has entropy";
+
+int main(int argc, char *argv[])
+	{
+	BN_CTX *ctx;
+	BIO *out=NULL;
+	int i,ret;
+	unsigned char c;
+	BIGNUM *r_mont,*r_mont_const,*r_recp,*r_simple,*a,*b,*m;
+
+	RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_rand may fail, and we don't
+	                                       * even check its return value
+	                                       * (which we should) */
+
+	ERR_load_BN_strings();
+
+	ctx=BN_CTX_new();
+	if (ctx == NULL) EXIT(1);
+	r_mont=BN_new();
+	r_mont_const=BN_new();
+	r_recp=BN_new();
+	r_simple=BN_new();
+	a=BN_new();
+	b=BN_new();
+	m=BN_new();
+	if (	(r_mont == NULL) || (r_recp == NULL) ||
+		(a == NULL) || (b == NULL))
+		goto err;
+
+	out=BIO_new(BIO_s_file());
+
+	if (out == NULL) EXIT(1);
+	BIO_set_fp(out,stdout,BIO_NOCLOSE);
+
+	for (i=0; i<200; i++)
+		{
+		RAND_bytes(&c,1);
+		c=(c%BN_BITS)-BN_BITS2;
+		BN_rand(a,NUM_BITS+c,0,0);
+
+		RAND_bytes(&c,1);
+		c=(c%BN_BITS)-BN_BITS2;
+		BN_rand(b,NUM_BITS+c,0,0);
+
+		RAND_bytes(&c,1);
+		c=(c%BN_BITS)-BN_BITS2;
+		BN_rand(m,NUM_BITS+c,0,1);
+
+		BN_mod(a,a,m,ctx);
+		BN_mod(b,b,m,ctx);
+
+		ret=BN_mod_exp_mont(r_mont,a,b,m,ctx,NULL);
+		if (ret <= 0)
+			{
+			printf("BN_mod_exp_mont() problems\n");
+			ERR_print_errors(out);
+			EXIT(1);
+			}
+
+		ret=BN_mod_exp_recp(r_recp,a,b,m,ctx);
+		if (ret <= 0)
+			{
+			printf("BN_mod_exp_recp() problems\n");
+			ERR_print_errors(out);
+			EXIT(1);
+			}
+
+		ret=BN_mod_exp_simple(r_simple,a,b,m,ctx);
+		if (ret <= 0)
+			{
+			printf("BN_mod_exp_simple() problems\n");
+			ERR_print_errors(out);
+			EXIT(1);
+			}
+
+		ret=BN_mod_exp_mont_consttime(r_mont_const,a,b,m,ctx,NULL);
+		if (ret <= 0)
+			{
+			printf("BN_mod_exp_mont_consttime() problems\n");
+			ERR_print_errors(out);
+			EXIT(1);
+			}
+
+		if (BN_cmp(r_simple, r_mont) == 0
+		    && BN_cmp(r_simple,r_recp) == 0
+			&& BN_cmp(r_simple,r_mont_const) == 0)
+			{
+			printf(".");
+			fflush(stdout);
+			}
+		else
+		  	{
+			if (BN_cmp(r_simple,r_mont) != 0)
+				printf("\nsimple and mont results differ\n");
+			if (BN_cmp(r_simple,r_mont_const) != 0)
+				printf("\nsimple and mont const time results differ\n");
+			if (BN_cmp(r_simple,r_recp) != 0)
+				printf("\nsimple and recp results differ\n");
+
+			printf("a (%3d) = ",BN_num_bits(a));   BN_print(out,a);
+			printf("\nb (%3d) = ",BN_num_bits(b)); BN_print(out,b);
+			printf("\nm (%3d) = ",BN_num_bits(m)); BN_print(out,m);
+			printf("\nsimple   =");	BN_print(out,r_simple);
+			printf("\nrecp     =");	BN_print(out,r_recp);
+			printf("\nmont     ="); BN_print(out,r_mont);
+			printf("\nmont_ct  ="); BN_print(out,r_mont_const);
+			printf("\n");
+			EXIT(1);
+			}
+		}
+	BN_free(r_mont);
+	BN_free(r_mont_const);
+	BN_free(r_recp);
+	BN_free(r_simple);
+	BN_free(a);
+	BN_free(b);
+	BN_free(m);
+	BN_CTX_free(ctx);
+	ERR_remove_thread_state(NULL);
+	CRYPTO_mem_leaks(out);
+	BIO_free(out);
+	printf(" done\n");
+	EXIT(0);
+err:
+	ERR_load_crypto_strings();
+	ERR_print_errors(out);
+#ifdef OPENSSL_SYS_NETWARE
+    printf("ERROR\n");
+#endif
+	EXIT(1);
+	return(1);
+	}
+
diff --git a/app/openssl/crypto/bn/todo b/app/openssl/crypto/bn/todo
new file mode 100644
index 00000000..e47e381a
--- /dev/null
+++ b/app/openssl/crypto/bn/todo
@@ -0,0 +1,3 @@
+Cache RECP_CTX values
+make the result argument independant of the inputs.
+split up the _exp_ functions