diff options
Diffstat (limited to 'pkg/osx/client.down.sh')
| -rwxr-xr-x | pkg/osx/client.down.sh | 426 |
1 files changed, 0 insertions, 426 deletions
diff --git a/pkg/osx/client.down.sh b/pkg/osx/client.down.sh deleted file mode 100755 index 1e173bba..00000000 --- a/pkg/osx/client.down.sh +++ /dev/null @@ -1,426 +0,0 @@ -#!/bin/bash -e -# Note: must be bash; uses bash-specific tricks -# -# ****************************************************************************************************************** -# Copyright By Tunnelblick. Redistributed with Bitmask under the GPL. -# This Tunnelblick script does everything! It handles TUN and TAP interfaces, -# pushed configurations and DHCP leases. :) -# -# This is the "Down" version of the script, executed after the connection is -# closed. -# -# Created by: Nick Williams (using original code and parts of old Tblk scripts) -# -# ****************************************************************************************************************** - -# @param String message - The message to log -logMessage() -{ - echo "${@}" -} - -# @param String message - The message to log -logDebugMessage() -{ - echo "${@}" > /dev/null -} - -trim() -{ -echo ${@} -} - -# @param String list - list of network service names, output from disable_ipv6() -restore_ipv6() { - - # Undoes the actions performed by the disable_ipv6() routine in client.up.tunnelblick.sh by restoring the IPv6 - # 'automatic' setting for each network service for which that routine disabled IPv6. - # - # $1 must contain the output from disable_ipv6() -- the list of network services. - # - # This routine outputs log messages describing its activities. - - if [ "$1" = "" ] ; then - exit - fi - - printf %s "$1 -" | \ - while IFS= read -r ripv6_service ; do - networksetup -setv6automatic "$ripv6_service" - logMessage "Re-enabled IPv6 (automatic) for '$ripv6_service'" - done -} - -########################################################################################## -flushDNSCache() -{ - if ${ARG_FLUSH_DNS_CACHE} ; then - set +e # "grep" will return error status (1) if no matches are found, so don't fail on individual errors - readonly OSVER="$(sw_vers | grep 'ProductVersion:' | grep -o '10\.[0-9]*')" - set -e # We instruct bash that it CAN again fail on errors - if [ "${OSVER}" = "10.4" ] ; then - - if [ -f /usr/sbin/lookupd ] ; then - set +e # we will catch errors from lookupd - /usr/sbin/lookupd -flushcache - if [ $? != 0 ] ; then - logMessage "WARNING: Unable to flush the DNS cache via lookupd" - else - logMessage "Flushed the DNS cache via lookupd" - fi - set -e # bash should again fail on errors - else - logMessage "WARNING: /usr/sbin/lookupd not present. Not flushing the DNS cache" - fi - - else - - if [ -f /usr/bin/dscacheutil ] ; then - set +e # we will catch errors from dscacheutil - /usr/bin/dscacheutil -flushcache - if [ $? != 0 ] ; then - logMessage "WARNING: Unable to flush the DNS cache via dscacheutil" - else - logMessage "Flushed the DNS cache via dscacheutil" - fi - set -e # bash should again fail on errors - else - logMessage "WARNING: /usr/bin/dscacheutil not present. Not flushing the DNS cache via dscacheutil" - fi - - if [ -f /usr/sbin/discoveryutil ] ; then - set +e # we will catch errors from discoveryutil - /usr/sbin/discoveryutil udnsflushcaches - if [ $? != 0 ] ; then - logMessage "WARNING: Unable to flush the DNS cache via discoveryutil udnsflushcaches" - else - logMessage "Flushed the DNS cache via discoveryutil udnsflushcaches" - fi - /usr/sbin/discoveryutil mdnsflushcache - if [ $? != 0 ] ; then - logMessage "WARNING: Unable to flush the DNS cache via discoveryutil mdnsflushcache" - else - logMessage "Flushed the DNS cache via discoveryutil mdnsflushcache" - fi - set -e # bash should again fail on errors - else - logMessage "/usr/sbin/discoveryutil not present. Not flushing the DNS cache via discoveryutil" - fi - - set +e # "grep" will return error status (1) if no matches are found, so don't fail on individual errors - hands_off_ps="$( ps -ax | grep HandsOffDaemon | grep -v grep.HandsOffDaemon )" - set -e # We instruct bash that it CAN again fail on errors - if [ "${hands_off_ps}" = "" ] ; then - if [ -f /usr/bin/killall ] ; then - set +e # ignore errors if mDNSResponder isn't currently running - /usr/bin/killall -HUP mDNSResponder - if [ $? != 0 ] ; then - logMessage "mDNSResponder not running. Not notifying it that the DNS cache was flushed" - else - logMessage "Notified mDNSResponder that the DNS cache was flushed" - fi - set -e # bash should again fail on errors - else - logMessage "WARNING: /usr/bin/killall not present. Not notifying mDNSResponder that the DNS cache was flushed" - fi - else - logMessage "WARNING: Hands Off is running. Not notifying mDNSResponder that the DNS cache was flushed" - fi - - fi - fi -} - -########################################################################################## -resetPrimaryInterface() -{ - set +e # "grep" will return error status (1) if no matches are found, so don't fail on individual errors - WIFI_INTERFACE="$(networksetup -listallhardwareports | awk '$3=="Wi-Fi" {getline; print $2}')" - if [ "${WIFI_INTERFACE}" == "" ] ; then - WIFI_INTERFACE="$(networksetup -listallhardwareports | awk '$3=="AirPort" {getline; print $2}')" - fi - PINTERFACE="$( scutil <<-EOF | - open - show State:/Network/Global/IPv4 - quit -EOF - grep PrimaryInterface | sed -e 's/.*PrimaryInterface : //' - )" - set -e # resume abort on error - - if [ "${PINTERFACE}" != "" ] ; then - if [ "${PINTERFACE}" == "${WIFI_INTERFACE}" -a "${OSVER}" != "10.4" -a -f /usr/sbin/networksetup ] ; then - if [ "${OSVER}" == "10.5" ] ; then - logMessage "Resetting primary interface '${PINTERFACE}' via networksetup -setairportpower off/on..." - /usr/sbin/networksetup -setairportpower off - sleep 2 - /usr/sbin/networksetup -setairportpower on - else - logMessage "Resetting primary interface '${PINTERFACE}' via networksetup -setairportpower ${PINTERFACE} off/on..." - /usr/sbin/networksetup -setairportpower "${PINTERFACE}" off - sleep 2 - /usr/sbin/networksetup -setairportpower "${PINTERFACE}" on - fi - else - if [ -f /sbin/ifconfig ] ; then - logMessage "Resetting primary interface '${PINTERFACE}' via ifconfig ${PINTERFACE} down/up..." - /sbin/ifconfig "${PINTERFACE}" down - sleep 2 - /sbin/ifconfig "${PINTERFACE}" up - else - logMessage "WARNING: Not resetting primary interface because /sbin/ifconfig does not exist." - fi - fi - else - logMessage "WARNING: Not resetting primary interface because it cannot be found." - fi -} - -########################################################################################## -trap "" TSTP -trap "" HUP -trap "" INT -export PATH="/bin:/sbin:/usr/sbin:/usr/bin" - -readonly OUR_NAME=$(basename "${0}") - -logMessage "**********************************************" -logMessage "Start of output from ${OUR_NAME}" - -# Remove the flag file that indicates we need to run the down script - -if [ -e "/tmp/bitmask-downscript-needs-to-be-run.txt" ] ; then - rm -f "/tmp/bitmask-downscript-needs-to-be-run.txt" -fi - -# Test for the "-r" Bitmask option (Reset primary interface after disconnecting) because we _always_ need its value. -# Usually we get the value for that option (and the other options) from State:/Network/OpenVPN, -# but that key may not exist (because, for example, there were no DNS changes). -# So we get the value from the Bitmask options passed to this script by OpenVPN. -# -# We do the same thing for the -f Bitmask option (Flush DNS cache after connecting or disconnecting) -ARG_RESET_PRIMARY_INTERFACE_ON_DISCONNECT="false" -ARG_FLUSH_DNS_CACHE="false" -while [ {$#} ] ; do - if [ "${1:0:1}" != "-" ] ; then # Bitmask arguments start with "-" and come first - break # so if this one doesn't start with "-" we are done processing Bitmask arguments - fi - if [ "$1" = "-r" ] ; then - ARG_RESET_PRIMARY_INTERFACE_ON_DISCONNECT="true" - else - if [ "$1" = "-f" ] ; then - ARG_FLUSH_DNS_CACHE="true" - fi - fi - shift # Shift arguments to examine the next option (if there is one) -done - -# Quick check - is the configuration there? -if ! scutil -w State:/Network/OpenVPN &>/dev/null -t 1 ; then - # Configuration isn't there - logMessage "WARNING: Not restoring DNS settings because no saved Bitmask DNS information was found." - - flushDNSCache - - if ${ARG_RESET_PRIMARY_INTERFACE_ON_DISCONNECT} ; then - resetPrimaryInterface - fi - logMessage "End of output from ${OUR_NAME}" - logMessage "**********************************************" - exit 0 -fi - -# Get info saved by the up script -TUNNELBLICK_CONFIG="$( scutil <<-EOF - open - show State:/Network/OpenVPN - quit -EOF -)" - -ARG_MONITOR_NETWORK_CONFIGURATION="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*MonitorNetwork :' | sed -e 's/^.*: //g')" -LEASEWATCHER_PLIST_PATH="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*LeaseWatcherPlistPath :' | sed -e 's/^.*: //g')" -REMOVE_LEASEWATCHER_PLIST="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*RemoveLeaseWatcherPlist :' | sed -e 's/^.*: //g')" -PSID="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*Service :' | sed -e 's/^.*: //g')" -# Don't need: SCRIPT_LOG_FILE="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*ScriptLogFile :' | sed -e 's/^.*: //g')" -# Don't need: ARG_RESTORE_ON_DNS_RESET="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*RestoreOnDNSReset :' | sed -e 's/^.*: //g')" -# Don't need: ARG_RESTORE_ON_WINS_RESET="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*RestoreOnWINSReset :' | sed -e 's/^.*: //g')" -# Don't need: PROCESS="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*PID :' | sed -e 's/^.*: //g')" -# Don't need: ARG_IGNORE_OPTION_FLAGS="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*IgnoreOptionFlags :' | sed -e 's/^.*: //g')" -ARG_TAP="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*IsTapInterface :' | sed -e 's/^.*: //g')" -ARG_FLUSH_DNS_CACHE="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*FlushDNSCache :' | sed -e 's/^.*: //g')" -ARG_RESET_PRIMARY_INTERFACE_ON_DISCONNECT="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*ResetPrimaryInterface :' | sed -e 's/^.*: //g')" -bRouteGatewayIsDhcp="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*RouteGatewayIsDhcp :' | sed -e 's/^.*: //g')" -bTapDeviceHasBeenSetNone="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*TapDeviceHasBeenSetNone :' | sed -e 's/^.*: //g')" -bAlsoUsingSetupKeys="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*bAlsoUsingSetupKeys :' | sed -e 's/^.*: //g')" -sTunnelDevice="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*TunnelDevice :' | sed -e 's/^.*: //g')" - -# Note: '\n' was translated into '\t', so we translate it back (it was done because grep and sed only work with single lines) -sRestoreIpv6Services="$(echo "${TUNNELBLICK_CONFIG}" | grep -i '^[[:space:]]*RestoreIpv6Services :' | sed -e 's/^.*: //g' | tr '\t' '\n')" - -# Remove leasewatcher -if ${ARG_MONITOR_NETWORK_CONFIGURATION} ; then - launchctl unload "${LEASEWATCHER_PLIST_PATH}" - if ${REMOVE_LEASEWATCHER_PLIST} ; then - rm -f "${LEASEWATCHER_PLIST_PATH}" - fi - logMessage "Cancelled monitoring of system configuration changes" -fi - -if ${ARG_TAP} ; then - if [ "$bRouteGatewayIsDhcp" == "true" ]; then - if [ "$bTapDeviceHasBeenSetNone" == "false" ]; then - if [ -z "$dev" ]; then - # If $dev is not defined, then use TunnelDevice, which was set from $dev by client.up.tunnelblick.sh - # ($def is not defined when this script is called from MenuController to clean up when exiting Bitmask) - if [ -n "${sTunnelDevice}" ]; then - logMessage "WARNING: \$dev not defined; using TunnelDevice: ${sTunnelDevice}" - set +e - ipconfig set "${sTunnelDevice}" NONE 2>/dev/null - set -e - logMessage "Released the DHCP lease via ipconfig set ${sTunnelDevice} NONE." - else - logMessage "WARNING: Cannot configure TAP interface to NONE without \$dev or State:/Network/OpenVPN/TunnelDevice being defined. Device may not have disconnected properly." - fi - else - set +e - ipconfig set "$dev" NONE 2>/dev/null - set -e - logMessage "Released the DHCP lease via ipconfig set $dev NONE." - fi - fi - fi -fi - -# Issue warning if the primary service ID has changed -set +e # "grep" will return error status (1) if no matches are found, so don't fail if not found -PSID_CURRENT="$( scutil <<-EOF | - open - show State:/Network/OpenVPN - quit -EOF -grep 'Service : ' | sed -e 's/.*Service : //' -)" -set -e # resume abort on error -if [ "${PSID}" != "${PSID_CURRENT}" ] ; then - logMessage "Ignoring change of Network Primary Service from ${PSID} to ${PSID_CURRENT}" -fi - -# Restore configurations -DNS_OLD="$( scutil <<-EOF - open - show State:/Network/OpenVPN/OldDNS - quit -EOF -)" -SMB_OLD="$( scutil <<-EOF - open - show State:/Network/OpenVPN/OldSMB - quit -EOF -)" -DNS_OLD_SETUP="$( scutil <<-EOF - open - show State:/Network/OpenVPN/OldDNSSetup - quit -EOF -)" -TB_NO_SUCH_KEY="<dictionary> { - BitmaskNoSuchKey : true -}" - -if [ "${DNS_OLD}" = "${TB_NO_SUCH_KEY}" ] ; then - scutil <<-EOF - open - remove State:/Network/Service/${PSID}/DNS - quit -EOF -else - scutil <<-EOF - open - get State:/Network/OpenVPN/OldDNS - set State:/Network/Service/${PSID}/DNS - quit -EOF -fi - -if [ "${DNS_OLD_SETUP}" = "${TB_NO_SUCH_KEY}" ] ; then - if ${bAlsoUsingSetupKeys} ; then - logDebugMessage "DEBUG: Removing 'Setup:' DNS key" - scutil <<-EOF - open - remove Setup:/Network/Service/${PSID}/DNS - quit -EOF - else - logDebugMessage "DEBUG: Not removing 'Setup:' DNS key" - fi -else - if ${bAlsoUsingSetupKeys} ; then - logDebugMessage "DEBUG: Restoring 'Setup:' DNS key" - scutil <<-EOF - open - get State:/Network/OpenVPN/OldDNSSetup - set Setup:/Network/Service/${PSID}/DNS - quit -EOF - else - logDebugMessage "DEBUG: Not restoring 'Setup:' DNS key" - fi -fi - -if [ "${SMB_OLD}" = "${TB_NO_SUCH_KEY}" ] ; then - scutil > /dev/null <<-EOF - open - remove State:/Network/Service/${PSID}/SMB - quit -EOF -else - scutil > /dev/null <<-EOF - open - get State:/Network/OpenVPN/OldSMB - set State:/Network/Service/${PSID}/SMB - quit -EOF -fi - -logMessage "Restored the DNS and SMB configurations" - -set +e # "grep" will return error status (1) if no matches are found, so don't fail if not found -new_resolver_contents="$( grep -v '#' < /etc/resolv.conf )" -set -e # resume abort on error -logDebugMessage "DEBUG:" -logDebugMessage "DEBUG: /etc/resolve = ${new_resolver_contents}" - -set +e # scutil --dns will return error status in case dns is already down, so don't fail if no dns found -scutil_dns="$( scutil --dns)" -set -e # resume abort on error -logDebugMessage "DEBUG:" -logDebugMessage "DEBUG: scutil --dns = ${scutil_dns}" -logDebugMessage "DEBUG:" - -restore_ipv6 "$sRestoreIpv6Services" - -flushDNSCache - -# Remove our system configuration data -scutil <<-EOF - open - remove State:/Network/OpenVPN/OldDNS - remove State:/Network/OpenVPN/OldSMB - remove State:/Network/OpenVPN/OldDNSSetup - remove State:/Network/OpenVPN/DNS - remove State:/Network/OpenVPN/SMB - remove State:/Network/OpenVPN - quit -EOF - -if ${ARG_RESET_PRIMARY_INTERFACE_ON_DISCONNECT} ; then - resetPrimaryInterface -fi - -logMessage "End of output from ${OUR_NAME}" -logMessage "**********************************************" - -exit 0 |